Hi there, Im needing to find an RUU file that I can use on my htc one m7. I lost battery power during an upgrade and soft bricked my phone dumbass I know.
Here is the information thanks ?
My HTC details
RELOCKED
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4T.27.3218.14
OpenDSP-v32.120.274.0909
OS-5.11.401.10
eMMC-boot 2048MB
May 5 2014 23:16:29.0
OS again is OS-5.11.401.10
Cheers
publication1 said:
Hi there, Im needing to find an RUU file that I can use on my htc one m7. I lost battery power during an upgrade and soft bricked my phone dumbass I know.
Here is the information thanks ?
My HTC details
RELOCKED
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4T.27.3218.14
OpenDSP-v32.120.274.0909
OS-5.11.401.10
eMMC-boot 2048MB
May 5 2014 23:16:29.0
OS again is OS-5.11.401.10
Cheers
Click to expand...
Click to collapse
your s-on their is no RUU for your version
you need custom recovery and you can flash the GURU Reset
here > Guru_Reset_M7_5.11.401.10-TeHashX.zip
http://www.androidfilehost.com/?fid=23501681358543706
If your stuck and can't flash custom recovery
try and flash this firmware first >> http://xda7.androidrevolution.org/db_mirror/Firmware/HTC/HTC_One/401/5.11.401.10.zip
Reply
clsA said:
your s-on their is no RUU for your version
you need custom recovery and you can flash the GURU Reset
here > Guru_Reset_M7_5.11.401.10-TeHashX.zip
http://www.androidfilehost.com/?fid=23501681358543706
If your stuck and can't flash custom recovery
try and flash this firmware first >> http://xda7.androidrevolution.org/db_mirror/Firmware/HTC/HTC_One/401/5.11.401.10.zip
Click to expand...
Click to collapse
So far I have tried 2x ROMS via flashing TWRP but both failed for what ever reason. I tried - 2 that matched my OS and still failed so can only seem to think about trying RUU's now Grrr
publication1 said:
So far I have tried 2x ROMS via flashing TWRP but both failed for what ever reason. I tried - 2 that matched my OS and still failed so can only seem to think about trying RUU's now Grrr
Click to expand...
Click to collapse
what version of TWRP ?
use 2.6.3.3 here > http://techerrata.com/browse/twrp2/m7
Wish me luck
clsA said:
what version of TWRP ?
use 2.6.3.3 here > http://techerrata.com/browse/twrp2/m7
Click to expand...
Click to collapse
away to try and flash it now, thanks
no luck reply
clsA said:
what version of TWRP ?
use 2.6.3.3 here > http://techerrata.com/browse/twrp2/m7
Click to expand...
Click to collapse
Have tried pushing ROM to TWRP using 2.6.3.3 and it comes up saying
Wiping data without wiping / data/media
Done
Updating partition details
E:Unable to open zip file
Error flashing zip /sdcard/ROM.zip
Updating partition details ?
Any ideas ? Thanks
publication1 said:
E:Unable to open zip file
Click to expand...
Click to collapse
bad download probably, check md5
reply
nkk71 said:
bad download probably, check md5
Click to expand...
Click to collapse
Yeh bad download, Cant find any other ones that will work though grrrr
Reply
publication1 said:
Yeh bad download, Cant find any other ones that will work though grrrr
Click to expand...
Click to collapse
Not getting a confirmation when pushing rom to sd card using command line, it follows the command but just keeps flashing. I checked TWRP and it is there but still failing like all the rest. Tutorials say its meant to show something like 33445kb changes to 44533553kb meaning thats it moved so maybe im trying to install when its only partly pushed to TWRP but thats been 5 minutes now ?
publication1 said:
Not getting a confirmation when pushing rom to sd card using command line, it follows the command but just keeps flashing. I checked TWRP and it is there but still failing like all the rest. Tutorials say its meant to show something like 33445kb changes to 44533553kb meaning thats it moved so maybe im trying to install when its only partly pushed to TWRP but thats been 5 minutes now ?
Click to expand...
Click to collapse
If you use sideload theirs a progress and the flash starts on it's own when ready
In TWRP / Advanced / ADB Sideload
on the PC > adb sideload name_of_rom.zip
publication1 said:
Not getting a confirmation when pushing rom to sd card using command line, it follows the command but just keeps flashing. I checked TWRP and it is there but still failing like all the rest. Tutorials say its meant to show something like 33445kb changes to 44533553kb meaning thats it moved so maybe im trying to install when its only partly pushed to TWRP but thats been 5 minutes now ?
Click to expand...
Click to collapse
adb push does not show any progress until it's done (5 to 10 mins for a 1GB file), it will only come back once it's finished
for example, point E here: http://forum.xda-developers.com/showthread.php?t=2228274&page=3
publication1 said:
Not getting a confirmation when pushing rom to sd card using command line, it follows the command but just keeps flashing. I checked TWRP and it is there but still failing like all the rest. Tutorials say its meant to show something like 33445kb changes to 44533553kb meaning thats it moved so maybe im trying to install when its only partly pushed to TWRP but thats been 5 minutes now ?[/QUOTE
Try sideloading a ROM
Click to expand...
Click to collapse
Reply
clsA said:
If you use sideload theirs a progress and the flash starts on it's own when ready
In TWRP / Advanced / ADB Sideload
on the PC > adb sideload name_of_rom.zip
Click to expand...
Click to collapse
It worked, perfectly, what an achievment this has been. Think a few tutorials of my way is required to help other newbies that I once was haha. Thanks for your input buddy ill 1up ya
Related
Hello guys! Im from Brazil, sorry about my english, isnt my fisrt language!
So I seemany post here and tryed to do all commented on that post and nothing for me, so I took the liberty to post a new one focused on my problem to try understand where I mess.
So the history its this:
I have a HTC ONE rooted and unlocked with S-ON ... first time I'm using the T.Mobile original and aftber a update do Ultimate HD 2.2v no problem, do all the things everybody talks, and correctly working on!
So recently I saw the Skydragon ROM and do all the same history, download the ZIP file. put in a SD CARD enter in a recovery mode and do the wipe data/factory wipe data cache / wipe davilk cache (using CWM) enter to install zip from sd card, select the right one e put INSTALL ...
Appear to me the AROMA Manager Installer, select all the right things without "girly" things, .. what I mean its, read all the things correctly and goona click on next next next next... anyway... the install goes good! no problem, when the aroma close my CWM return back, so I selelct reboot to try the new one ROM and here start my problem:
Appear a msg that my recovery maybe lost something , do u wanna fix? I select yes and the the system reboot.
Now the phone stuck in a bootloop on HTC green logo, the phone try to boot up and reboot and the second time appear on the top of my phone "Enter in recovery ... "and reboot again .... and stay doing all this f*** every time..
I follow some tips about others users and have the same problem. What I do until now:
1. download recovery TWRP CWM and flash erase flash recovery ... and continue with the same problem
2. extract the boot img from the last custom ROM I used was worked withou problem (Ultimate HD) and flash boot ... get the same error.
3. to do the S-OFF all the tutorials says I need stay in ANDROID and at moment its impossible due the bootloop I just can enter in a bootloader
4. Try find my RUU and miss, my cid is TMOB_010
Oh, my BOOTLOADER INFORMATIONS IS:
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RaDIO-4A.21.3263.03
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
Oct 4 2013, 17:31:32.0
All the RUU files are ZIP how I install this?
Sorry about the big text, but I really dont know what to do!
Please a good soul can help me?
Thx brothers!
Cheers
dehzincwb said:
I have a HTC ONE rooted and unlocked with S-ON ...
So recently I saw the Skydragon ROM and do all the same history
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RaDIO-4A.21.3263.03
OpenDSP-v32.120.274.0909
OS-
Cheers
Click to expand...
Click to collapse
1- What's the ROM that got you stuck? Link please.
2- What recovery (and version number) were you using.
3- You're firmware version is "missing", recommend you get S-Off, use http://rumrunner.us/ with ARHD 31.6: http://forum.xda-developers.com/showthread.php?t=2183023
nkk71 said:
1- What's the ROM that got you stuck? Link please.
2- What recovery (and version number) were you using.
3- You're firmware version is "missing", recommend you get S-Off, use http://rumrunner.us/ with ARHD 31.6: http://forum.xda-developers.com/showthread.php?t=2183023
Click to expand...
Click to collapse
Im stuck when try install the Skydragon v4.0
I tryed every version of recovery CWM and TRWP but the last I tryed was
CWM 6.0.4 with touch and without touch
TRWP 2.6.3.4 and 2.6.3.3.
Only with TRWP after reboot appear the blue logo TEAMWIN and reboot again...
With CWM dont appear nothing... just stay rebooting...
I gonna try what u say man... but could u please write a step by step how I can do this?
The tutorial abour rumrunner says I need stay in android mode... but my phone dont enter in android mode...
dehzincwb said:
Im stuck when try install the Skydragon v4.0
I tryed every version of recovery CWM and TRWP but the last I tryed was
CWM 6.0.4 with touch and without touch
TRWP 2.6.3.4 and 2.6.3.3.
Only with TRWP after reboot appear the blue logo TEAMWIN and reboot again...
With CWM dont appear nothing... just stay rebooting...
Click to expand...
Click to collapse
How about that link to the Rom please.
Sent from my HTC One using Tapatalk
nkk71 said:
How about that link to the Rom please.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2319187
The guys from this ROM trying to help me too... u gonna see some posts there.
dehzincwb said:
TRWP 2.6.3.4 and 2.6.3.3.
Only with TRWP after reboot appear the blue logo TEAMWIN and reboot again...
Click to expand...
Click to collapse
Corrupt download, download again
2.6.3.3: http://techerrata.com/browse/twrp2/m7
2.6.3.4: http://techerrata.com/browse/twrp2/m7ul
Do not use a download manager on that site, it will result in a corrupt download!! then verify MD5!!
if MD5 is OK:
fastboot flash recovery <name of recovery>.img
fastboot erase cache
fastboot reboot-bootloader
then follow instructions for S-On devices.
Thanks... I gonna try this tips..
Just one question, how I check the MD5?
Sent from my LG-E975 using xda app-developers app
dehzincwb said:
Thanks... I gonna try this tips..
Just one question, how I check the MD5?
Sent from my LG-E975 using xda app-developers app
Click to expand...
Click to collapse
here's one for Windows: http://www.winmd5.com/
original MD5 is on the download page, you need to compare/verify that to the one you downloaded; if it does NOT match, then download is corrupt.
nkk71 said:
here's one for Windows: http://www.winmd5.com/
original MD5 is on the download page, you need to compare/verify that to the one you downloaded; if it does NOT match, then download is corrupt.
Click to expand...
Click to collapse
Thanks guys! and specially u man! thanks a lot!!
All the stuffs works without any problem.!!
I guess the moderator could put this post or the awnser of this post in glow.. Cause, my bootloop problema was a corrupt CWM and TRWP zip files..
All I need to do was, download the last TRWP check de MD5 it's okay and flash it!
OMG I do this all time but never check de MD5 to know if the file is okay!! Maybe this is the problem about a hundred people stuck in bootlop!
Guys really thanks!
Cheers!
Hey guys,
This will be an interesting first post... I do have to say I apologize for making a thread regarding this, but I really feel like I'm stuck and would really benefit from some direct help. I've been searching non-stop for the last 2 days, and currently have more than 20 hours infront of my computer trying to figure out why I cannot restore this HTC One.
Details;
Tampered
Unlocked
M7_UL pvt ship S-ON RH
Hboot 1.55
Radio-4a.20.3263.16
OpenDSP-v32.120.274.0909
OS-3.22.631.1
eMMC-boot 2048mb
Sep17/2013
ROGERS CANADA NETWORK
-Currently cannot get any further than HBOOT and TWRP 2.6
-Ends up in boot loop
-Recognized on Fastboot, and device manager, but cannot access via My Computer
-Phone had a garbage ROM, and I ended up wiping my entire phone. Every single file.
-If I could somehow get an install onto it I could try to get it going through TWRP?
-I've downloaded several gigs of roms that I've tried, and cant seem to get them to work.
-Phone is essentially bricked and non-functional. There is a way to save it I think??
-ABD device not found, have SDK, fully updated drivers all around... nothing.
I just want the phone back to factory... but ROGERS RUU files are .zip and not .exe
Very difficult to figure out a solution...
Please help guys,
Sorry I could not get it on my own. New to phones but not new to computers and troubleshooting.
I'll leave this tab open and constantly check whilst I look for more answers on my issue.
Thank you!
-Spence
I would try sideloading a rom through TWRP. If I remember correctly, you need the latest ADB which comes bundled with this:
http://developer.android.com/sdk/index.html
I think having the latest ADB binaries may also help your PC detect your phone. Once you have that downloaded, you can sideload a rom. More info on that here:
http://teamw.in/ADBSideload
Finally got it to recognize the device on ADB
However it says unauthorized, because I assume I couldnt activate debugging.
Still cant because it's bricked!
Drivers are all up to date to the best of my knowledge
Double and triple checked?
I will try to do something through TWRP... I dont have a lot of experience with it, I know I was fighting with it for a couple hours today, trying to get through all the errors - or to detect my computer properly.
ADB Sideload Complete
Failed
Unable to mount across the board.
-Spencer
UPDATE:
Sideload seems to be working. Still getting errors for being unauthorized I think..
12:33am
Via CWM I was able to get Android Revolution HD to install, and actually went through the entire install process...
At the end it said some files were unable to be installed, and then put me back in the bootloader/cwm cycle...
I just want to get the phone stable enough to use, so that I can revert it back to stock!
-Spence
Lets just say that the phone is completely non-functional.
What would be the step by step process of addressing such a problem?
As if the phone were not working at all...?
Can't seem to get it going, no matter how hard I try!
20 hours in!
Bawshawg said:
Lets just say that the phone is completely non-functional.
What would be the step by step process of addressing such a problem?
As if the phone were not working at all...?
Can't seem to get it going, no matter how hard I try!
Flash the last TWRP (2.6.3.4)
Flash ARHD 51
Fastboot erase cache
Erase davil'k cache
20 hours in!
Click to expand...
Click to collapse
Flash the last TWRP (2.6.3.4)
Flash ARHD 51
Fastboot erase cache
Erase davil'k cache
Uxepro said:
Flash the last TWRP (2.6.3.4)
Flash ARHD 51
Fastboot erase cache
Erase davil'k cache
Click to expand...
Click to collapse
Followed by what though?
If I'm basically just starting from the hardware up?
Nothing seems to be going in my favour! :S
Bawshawg said:
Lets just say that the phone is completely non-functional.
What would be the step by step process of addressing such a problem?
As if the phone were not working at all...?
Can't seem to get it going, no matter how hard I try!
20 hours in!
Click to expand...
Click to collapse
Uxepro said:
Flash the last TWRP (2.6.3.4)
Flash ARHD 51
Fastboot erase cache
Erase davil'k cache
Click to expand...
Click to collapse
ARHD 51 will not help as it still requires s-off
I'm going to recommend these instructions posted by @SaHiLzZ
Download Canadian 1.55 HBOOT recovery: http://goo.gl/2Kntxz
Download TWRP 2.6.3.3: http://techerrata.com/file/twrp2/m7/...2.6.3.3-m7.img
Make sure you're in the bootloader go into fastboot and make sure the downloaded image is in the same folder as your fastboot.
fastboot flash recovery recovery_stock_155hboot_htc_one_m7.img
fastboot erase cache
fastboot reboot-bootloader
Go into bootloader and then choose Factory Reset - let that finish running <<< Important!
Phone will go out and start bootlooping. Now power off and go back to bootloader mode:
Go into fastboot
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
Now you can go into custom recovery and you should be good to proceed.
Click to expand...
Click to collapse
Sideload should work after this
Android revolution 51 does not require S-off...
Unless you want to upgrade the firmware
Uxepro said:
Android revolution 51 does not require S-off...
Unless you want to upgrade the firmware
Click to expand...
Click to collapse
please don't confuse things ... ARHD 51 will not boot / s-on
http://forum.xda-developers.com/showpost.php?p=50085331&postcount=185
http://forum.xda-developers.com/showpost.php?p=50084310&postcount=174
try Sideloading this one >> http://xda7.androidrevolution.nl/db_mirror/ROMs/HTC_One/Android_Revolution_HD-One_31.6.zip
clsA said:
please don't confuse things ... ARHD 51 will not boot / s-on
http://forum.xda-developers.com/showpost.php?p=50085331&postcount=185
http://forum.xda-developers.com/showpost.php?p=50084310&postcount=174
Click to expand...
Click to collapse
It's an uncommon thing. It can happen, but it does not require s-off.
"You need:
HTC One unlocked with htcdev.com (S-ON) or S-OFF"
Uxepro said:
It's an uncommon thing. It can happen, but it does not require s-off.
"You need:
HTC One unlocked with htcdev.com (S-ON) or S-OFF"
Click to expand...
Click to collapse
Dude he just posted he flashed it and it won't boot .. what don't you understand ?
clsA said:
Dude he just posted he flashed it and it won't boot .. what don't you understand ?
Click to expand...
Click to collapse
It doesn't boot because he used twrp 2.6, instead of 2.6.3.3 or didn't erase cache
I was S-on and everything was fine with flashing arhd 51.
No way a rom requires s-off to be flashed, unless an upgrade of hboot is mandatory.
Folks!
Somehow, I ended up getting the HTC Guru reset to work....
After literally 24 hours of messing with this thing.
So now I am running 4.3
and in the near future will try to completely restore back to all Rogers Canada software and update to their Kitkat OTA???
Or should I just wait a bit for someone to release one that works correctly?
Thank you for the help!
-Spence
Bawshawg said:
Folks!
Somehow, I ended up getting the HTC Guru reset to work....
After literally 24 hours of messing with this thing.
So now I am running 4.3
and in the near future will try to completely restore back to all Rogers Canada software and update to their Kitkat OTA???
Or should I just wait a bit for someone to release one that works correctly?
Thank you for the help!
-Spence
Click to expand...
Click to collapse
Just upgrade your TWRP, and flash the 4.4.2 rom you want
If you can Soff, then you will be able to run RUU for dev edition kitkat, or do the google edition conversion. That will give you an upgrade path in future by OTA
sent from my mobile device
I've been having some problems recently. I've been wanting to update to Kitkat but I have replaced the stock recovery software with CWM, and thus it doesn't work.
To solve this problem I've figured out that I need to get my claws on an RUU, which I have. Hopefully I've grabbed the right one. It doesn't seem like the RADIO serial-thingy matches though. Device has
Code:
4A.21
whilst the RUU has
Code:
4A.23
.
I've tried using the RUU in fastboot but later figured out that I need to have S-OFF for that. That is currently not the case. I've tried using both Firewater and Rumrunner. According to the instructions I'm required to have the phone on in the usual way. As in, not in the bootloader. The problem is that my phone is stuck in some restart loop. When reaching the PIN-screen it will automatically restart/crash after a few seconds. I can however use the phone as usual during this time. Sometimes, it alerts me with an error.
It also seems like the battery completely empties itself sometimes. This is when trying to restore it, getting in and out from the bootloader and the like.
Here's some software info:
CID: HTC__Y13
MIDN0710000
Bootloader info:
Code:
M7_UL PBT SHIP S-ON RH
Code:
HBOOT-1.55.0000
Code:
RADIO-4A.21.3263.04
Code:
OpenDSP-v32.120.274.0909
Code:
OS-3.62.401.1
Great thanks in advance and pardon my useless formatting (and my lacking knowledge of this forum as there might be some rules I'm not following), I'm damn tired of this device.
Tmplt said:
I've been having some problems recently. I've been wanting to update to Kitkat but I have replaced the stock recovery software with CWM, and thus it doesn't work.
To solve this problem I've figured out that I need to get my claws on an RUU, which I have. Hopefully I've grabbed the right one. It doesn't seem like the RADIO serial-thingy matches though. Device has
Code:
4A.21
whilst the RUU has
Code:
4A.23
.
I've tried using the RUU in fastboot but later figured out that I need to have S-OFF for that. That is currently not the case. I've tried using both Firewater and Rumrunner. According to the instructions I'm required to have the phone on in the usual way. As in, not in the bootloader. The problem is that my phone is stuck in some restart loop. When reaching the PIN-screen it will automatically restart/crash after a few seconds. I can however use the phone as usual during this time. Sometimes, it alerts me with an error.
It also seems like the battery completely empties itself sometimes. This is when trying to restore it, getting in and out from the bootloader and the like.
Here's some software info:
CID: HTC__Y13
MIDN0710000
Bootloader info:
Code:
M7_UL PBT SHIP S-ON RH
Code:
HBOOT-1.55.0000
Code:
RADIO-4A.21.3263.04
Code:
OpenDSP-v32.120.274.0909
Code:
OS-3.62.401.1
Great thanks in advance and pardon my useless formatting (and my lacking knowledge of this forum as there might be some rules I'm not following), I'm damn tired of this device.
Click to expand...
Click to collapse
If the RUU is an .exe file, then try placing it in the same folder as your ADB/FASTBOOT files. Plug-in your phone to your PC so that it is recognized on the PC then double click the RUU.exe file. Follow the on-screen instructions. You don't need S-OFF to run an RUU for your phone with the correct CID & MID providing the RUU is the same version or higher.
majmoz said:
If the RUU is an .exe file, then try placing it in the same folder as your ADB/FASTBOOT files. Plug-in your phone to your PC so that it is recognized on the PC then double click the RUU.exe file. Follow the on-screen instructions. You don't need S-OFF to run an RUU for your phone with the correct CID & MID providing the RUU is the same version or higher.
Click to expand...
Click to collapse
sigh... How could I be so dense? I should know this. Thanks for the quick response. I will try this at once.
majmoz said:
If the RUU is an .exe file, then try placing it in the same folder as your ADB/FASTBOOT files. Plug-in your phone to your PC so that it is recognized on the PC then double click the RUU.exe file. Follow the on-screen instructions. You don't need S-OFF to run an RUU for your phone with the correct CID & MID providing the RUU is the same version or higher.
Click to expand...
Click to collapse
The RUU crashes when launching it, "InstallScript Setup Launcher has stopped working". I'm quite sure I have the required stuff to run it. Running it as admin didn't help.
Tmplt said:
The RUU crashes when launching it, "InstallScript Setup Launcher has stopped working". I'm quite sure I have the required stuff to run it. Running it as admin didn't help.
Click to expand...
Click to collapse
It looks like a PC issue. Check out this post Installscript setup launcher has stopped working! In the reply they list two methods it looks like you did the first one. Sometimes, I just have to reboot the computer to get everything set correctly.
majmoz said:
It looks like a PC issue. Check out this post ** In the reply they list two methods it looks like you did the first one. Sometimes, I just have to reboot the computer to get everything set correctly.
Click to expand...
Click to collapse
Unfortunately, none of these methods helps. The device is supposed to be in Fastboot USB mode when the RUU is launched, yes?
Tmplt said:
Unfortunately, none of these methods helps. The device is supposed to be in Fastboot USB mode when the RUU is launched, yes?
Click to expand...
Click to collapse
what is the ruu version you are trying to use (complete file name)?
easiest way: download this guru reset file, its exactly the same version you have on your phone now.
http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/
put TWRP 2.6.3.3 (recommended) recovery on your phone
copy the zip to your SDcard
Enter recovery and flash like you would do with a custom rom
in the Aroma installer, select wipe data, install stock recovery, install stock radio when prompted.
This file will put you back to fully stock.
Help also
Hi, I'm a newbie and I was supposed to post a thread regarding a problem I'm facing similar to this. So if it's alright, I'll post it here also and ask for your advice. I recently unlocked my HTC One w/ 4.4.2 amd Sense 6.0 a few days ago and was also able to flash CWM custom recovery and root it. I then tried flashing the latest Android Revolution HD, when I rebooted the phone after intallation, it just stays on the first spash screen. I forgot that I needed to S-off my device. So now, I can only access the bootloader and recovery. The status of my device currently is *Tampered*, Unlocked and S-On with 1.57 Hboot. Also, I can't copy files from my PC to the device. I don't know what to do. I've been reading around but I think I need some concrete advice. Thank you in advance.
Baconnugget said:
Hi, I'm a newbie and I was supposed to post a thread regarding a problem I'm facing similar to this. So if it's alright, I'll post it here also and ask for your advice. I recently unlocked my HTC One w/ 4.4.2 amd Sense 6.0 a few days ago and was also able to flash CWM custom recovery and root it. I then tried flashing the latest Android Revolution HD, when I rebooted the phone after intallation, it just stays on the first spash screen. I forgot that I needed to S-off my device. So now, I can only access the bootloader and recovery. The status of my device currently is *Tampered*, Unlocked and S-On with 1.57 Hboot. Also, I can't copy files from my PC to the device. I don't know what to do. I've been reading around but I think I need some concrete advice. Thank you in advance.
Click to expand...
Click to collapse
Best to start your own thread, but on a quick fix, your problem is CWM, you need to use TWRP recovery to flash that rom, also recommend 2.6.3.3
Tampered and unlocked is normal, nothing to worry about, and you don't need s-off to flash custom rom's, just an unlocked bootloader
alray said:
what is the ruu version you are trying to use (complete file name)?
Click to expand...
Click to collapse
Bugger, I have it renamed to RUU.exe and it's md5 doesn't match any file from the site I remember I downloaded it from. I am, however, currently downloading
Code:
RUU_M7_UL_K44_SENSE55_MR_O2_UK_4.20.206.16_Radio_4A.23.3263.28_10.38r.1157.04L_release_353143_signed_2.exe
CID and MID matches, but I didn't buy it in the UK. It was bought in Europe.
Seanie280672 said:
Best to start your own thread, but on a quick fix, your problem is CWM, you need to use TWRP recovery to flash that rom, also recommend 2.6.3.3
Tampered and unlocked is normal, nothing to worry about, and you don't need s-off to flash custom rom's, just an unlocked bootloader
Click to expand...
Click to collapse
Thank you, I appreciate your advice. I tried flashing TWRP recovery but when I go into TWRP recovery, my touchscreen doesn't respond. Any thoughts on why? It works when I'm on CWM though.
Tmplt said:
Bugger, I have it renamed to RUU.exe and it's md5 doesn't match any file from the site I remember I downloaded it from. I am, however, currently downloading
Code:
RUU_M7_UL_K44_SENSE55_MR_O2_UK_4.20.206.16_Radio_4A.23.3263.28_10.38r.1157.04L_release_353143_signed_2.exe
CID and MID matches, but I didn't buy it in the UK. It was bought in Europe.
Click to expand...
Click to collapse
Did you name that file yourself, that's the wrong file, that one is O2 "206", hence 4.20.206.16 you need 401, 3.62.401.1 which is WWE, the same number under your os information in your first post and the same as the guru reset I linked.
Tmplt said:
Bugger, I have it renamed to RUU.exe and it's md5 doesn't match any file from the site I remember I downloaded it from. I am, however, currently downloading
Code:
RUU_M7_UL_K44_SENSE55_MR_O2_UK_4.20.206.16_Radio_4A.23.3263.28_10.38r.1157.04L_release_353143_signed_2.exe
CID and MID matches, but I didn't buy it in the UK. It was bought in Europe.
Click to expand...
Click to collapse
download this file: http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/
this is a reset rom
flash it from twrp 2.6.3.3 or from cwm recovery
select to restore stock radio and stock recovery
then you'll be fine to take ota updates.
the file you are currently downloading isnt for your phone.
edit:
well @Seanie280672 already suggested you to do this (just saw his previous post)
will be the easiest and fastest solution in your case.
Seanie280672 said:
easiest way: download this guru reset file, its exactly the same version you have on your phone now.
**
put TWRP 2.6.3.3 (recommended) recovery on your phone
copy the zip to your SDcard
Enter recovery and flash like you would do with a custom rom
in the Aroma installer, select wipe data, install stock recovery, install stock radio when prompted.
This file will put you back to fully stock.
Click to expand...
Click to collapse
TWRP 2.6.3.3 has been flashed and I'm currently downloading the .zip file. Is there a way to put the archive on the device staying in TWRP/Fastboot?
Tmplt said:
TWRP 2.6.3.3 has been flashed and I'm currently downloading the .zip file. Is there a way to put the archive on the device staying in TWRP/Fastboot?
Click to expand...
Click to collapse
with your phone booted in twrp main menu, and the rom.zip in the same folder of adb.exe and fasboot.exe:
Code:
adb push guru_reset_m7_3.62.401.1.zip /sdcard/
wait for the file to transfer (5-10 min) (there is no progress bar just wait adb to tell you the file transfer is complete)
then in twrp hit "install" and then choose guru_reset_m7_3.62.401.1.zip
alray said:
with your phone booted in twrp main menu, and the rom.zip in the same folder of adb.exe and fasboot.exe:
Code:
adb push guru_reset_m7_3.62.401.1.zip /sdcard/
wait for the file to transfer (5-10 min) (there is no progress bar just wait adb to tell you the file transfer is complete)
then in twrp hit "install" and then choose guru_reset_m7_3.62.401.1.zip
Click to expand...
Click to collapse
Thanks!
On an unrelated side-note; if I "thank" someone in the forum, does that count as an upvote or a complete fix regarding my problem (like StackOverflow works)?
Tmplt said:
if I "thank" someone in the forum, does that count as an upvote or a complete fix regarding my problem (like StackOverflow works)?
Click to expand...
Click to collapse
no, hitting the "thank" button doesn't count as an upvote like on other forum. This is only to say thank you to a person who helped you.
Seanie280672 said:
easiest way: download this guru reset file, its exactly the same version you have on your phone now.
**
put TWRP 2.6.3.3 (recommended) recovery on your phone
copy the zip to your SDcard
Enter recovery and flash like you would do with a custom rom
in the Aroma installer, select wipe data, install stock recovery, install stock radio when prompted.
This file will put you back to fully stock.
Click to expand...
Click to collapse
alray said:
download this file: **
this is a reset rom
flash it from twrp 2.6.3.3 or from cwm recovery
select to restore stock radio and stock recovery
then you'll be fine to take ota updates.
the file you are currently downloading isnt for your phone.
edit:
well @Seanie280672 already suggested you to do this (just saw his previous post)
will be the easiest and fastest solution in your case.
Click to expand...
Click to collapse
alray said:
with your phone booted in twrp main menu, and the rom.zip in the same folder of adb.exe and fasboot.exe:
Code:
adb push guru_reset_m7_3.62.401.1.zip /sdcard/
wait for the file to transfer (5-10 min) (there is no progress bar just wait adb to tell you the file transfer is complete)
then in twrp hit "install" and then choose guru_reset_m7_3.62.401.1.zip
Click to expand...
Click to collapse
The ROM was successfully installed and I'm currently configuring my phone! The phone did not implode when restarting, something I take as a sign of a functional phone! A truckload of thanks for the both of ya!
Long story short usually first thing I do is root and rom my phones, but I recently got an HTC One off of swappa and loved it, didnt see a reason to root. I figured I would give dual-booting via multiboot a shot, so I HTC Dev unlocked it, rooted it, installed elemental kernel, and flashed CM11. Well CM11 wouldnt boot and I tinkered so I just figured I would cut my losses, so I followed the instructions to remove it which wiped my SD card. I was on linux, and couldn't get fastboot usb, just fastboot ac. So I hopped on a friends computer, Win8.1 and downloaded a special set of drivers and whatnot, got ADB and fastboot running. TWRP wasnt working very well, it wouldnt let me use ADB so I fastboot installed CWM. I managed to push cyanogenmod to it, but kept getting an error that wouldnt let me install it. So I figured next thing to do would be RUU it, and I got my version number and matched the CID and all that, it failed with an error 12. Both .exe and .zip give me the same error. Well not its 3am and I've been at it for 5 hours now, I dont know what to do. It seems like everything I try to do fails. Please give me some advice.
RELOCKED
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.000
RADIO-4T.27.3218.14
OS-
eMMC-boot 2048MB
flapflip22 said:
Long story short usually first thing I do is root and rom my phones, but I recently got an HTC One off of swappa and loved it, didnt see a reason to root. I figured I would give dual-booting via multiboot a shot, so I HTC Dev unlocked it, rooted it, installed elemental kernel, and flashed CM11. Well CM11 wouldnt boot and I tinkered so I just figured I would cut my losses, so I followed the instructions to remove it which wiped my SD card. I was on linux, and couldn't get fastboot usb, just fastboot ac. So I hopped on a friends computer, Win8.1 and downloaded a special set of drivers and whatnot, got ADB and fastboot running. TWRP wasnt working very well, it wouldnt let me use ADB so I fastboot installed CWM. I managed to push cyanogenmod to it, but kept getting an error that wouldnt let me install it. So I figured next thing to do would be RUU it, and I got my version number and matched the CID and all that, it failed with an error 12. Both .exe and .zip give me the same error. Well not its 3am and I've been at it for 5 hours now, I dont know what to do. It seems like everything I try to do fails. Please give me some advice.
RELOCKED
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.000
RADIO-4T.27.3218.14
OS-
eMMC-boot 2048MB
Click to expand...
Click to collapse
Your problems started at trying to install cm11 with elementalx kernel, that's a sense kernel and cm is not a sense Rom, so unlock your bootloader again and flash twrp 2.6.3.3 to your phone, push a sense Rom of your choice to the phone and flash it, I'm guessing the ruu isn't working as you can't back flash with s-on and you already have the newest os / firmware on your phone according to your hboot version
Seanie280672 said:
Your problems started at trying to install cm11 with elementalx kernel, that's a sense kernel and cm is not a sense Rom, so unlock your bootloader again and flash twrp 2.6.3.3 to your phone, push a sense Rom of your choice to the phone and flash it, I'm guessing the ruu isn't working as you can't back flash with s-on and you already have the newest os / firmware on your phone according to your hboot version
Click to expand...
Click to collapse
Will give this a try, thanks
and dont forget, 4.4+ sense roms (i.e arhd) must be flashed using twrp 2.6.3.3 or 2.6.3.4 and newest CM11 roms must be flashed using twrp 2.7.1.1 because of the new fstab layout introduced May, 2014
alray said:
and dont forget, 4.4+ sense roms (i.e arhd) must be flashed using twrp 2.6.3.3 or 2.6.3.4 and newest CM11 roms must be flashed using twrp 2.7.1.1 because of the new fstab layout introduced May, 2014
Click to expand...
Click to collapse
Noted, just flased 2.6.3.3 and adb pushing a sense 6 rom. Kinda funny, 2.6.3.3 connects to adb on linux but no other recovery would. Granted it wont let me side-load but as long as I can push files I'm good. Just tested it by pushing a random zip file, all is good. Just gonna wait for it to finish downloading, adb push it and try to flash it. If all goes as well as I hope it should work. I'll let you guys know if I need more help.
Thank you so much.
flapflip22 said:
Noted, just flased 2.6.3.3 and adb pushing a sense 6 rom. Kinda funny, 2.6.3.3 connects to adb on linux but no other recovery would. Granted it wont let me side-load but as long as I can push files I'm good. Just tested it by pushing a random zip file, all is good. Just gonna wait for it to finish downloading, adb push it and try to flash it. If all goes as well as I hope it should work. I'll let you guys know if I need more help.
Thank you so much.
Click to expand...
Click to collapse
if you cant sideload its probably because you are using an outdated version of adb. latest version of adb is 1.0.31. however, you'll be fine using adb push.
alray said:
if you cant sideload its probably because you are using an outdated version of adb. latest version of adb is 1.0.31. however, you'll be fine using adb push.
Click to expand...
Click to collapse
Alright, managed to adb push to files to my phone but now it just says "updating partition details..." then "error flashing zip /sdcard/myrom.zip" and FAILED at the bottom. What next?
flapflip22 said:
Alright, managed to adb push to files to my phone but now it just says "updating partition details..." then "error flashing zip /sdcard/myrom.zip" and FAILED at the bottom. What next?
Click to expand...
Click to collapse
you might want to wipe everything + format data then push the rom again and install it. Also check MD5 of the rom
alray said:
you might want to wipe everything + format data then push the rom again and install it. Also check MD5 of the rom
Click to expand...
Click to collapse
It worked! Followed your instructions, then I used a CM 10.2 rom and a JB kernel and it worked just fine. Next I'm gonna s-off and superCID it so I wont have to go through any of this again, and then flash the ROM and kernel I want. Probably not gonna tinker anymore until later when the newest HTC sense release comes out.
flapflip22 said:
It worked! Followed your instructions, then I used a CM 10.2 rom and a JB kernel and it worked just fine. Next I'm gonna s-off and superCID it so I wont have to go through any of this again, and then flash the ROM and kernel I want. Probably not gonna tinker anymore until later when the newest HTC sense release comes out.
Click to expand...
Click to collapse
:good: happy flashing
I've got this phone from rogers, its been stuck in a boot loop, and I am trying to get the ruu to revert it to stock. The one on HTC's website doesn't work. Can anyone help me?
mur1taza said:
I've got this phone from rogers, its been stuck in a boot loop, and I am trying to get the ruu to revert it to stock. The one on HTC's website doesn't work. Can anyone help me?
Click to expand...
Click to collapse
It does work. Your problem is you need to relock the bootloader if you unlocked it and you also 100% need the stock recovery image because if you have Philz Touch Recovery installed it's going to block the RUU from working and that's part of HTC's security measures.
Re
MrMike2182 said:
It does work. Your problem is you need to relock the bootloader if you unlocked it and you also 100% need the stock recovery image because if you have Philz Touch Recovery installed it's going to block the RUU from working and that's part of HTC's security measures.
Click to expand...
Click to collapse
I tried relocking the bootloader and used the ruu but I got an error 155, they said I had the wrong image. I have TWRP recovery installed. And the device wont even boot into that. How do I get the stock image?
mur1taza said:
I tried relocking the bootloader and used the ruu but I got an error 155, they said I had the wrong image. I have TWRP recovery installed. And the device wont even boot into that. How do I get the stock image?
Click to expand...
Click to collapse
First you need to find out whether or not your phone is 32 or 64 bit so remove the battery and replace it then hold the volume down button and press the power button at the same time then type everything you see on your HBoot screen here so I can see it.
MrMike2182 said:
First you need to find out whether or not your phone is 32 or 64 bit so remove the battery and replace it then hold the volume down button and press the power button at the same time then type everything you see on your HBoot screen here so I can see it.
Click to expand...
Click to collapse
A11_UL PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-1.101.1372.19.0822
OpenDSP-v28.2.2.00546.0331
OS-
eMMC-boot 1024MB
mur1taza said:
A11_UL PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-1.101.1372.19.0822
OpenDSP-v28.2.2.00546.0331
OS-
eMMC-boot 1024MB
Click to expand...
Click to collapse
Go over here to twrp website twrp 2.8.7.0 HTC Desire 510 then make sure this image file downloads into your minimal adb and fastboot folder on the computer and it MUST be inside the folder then open a command window within the folder and try flashing the recovery file but first change the name I.E rename the file to recovery.img and then do fastboot flash recovery recovery.img after that type adb reboot recovery and see if it worked.
MrMike2182 said:
Go over here to twrp website twrp 2.8.7.0 HTC Desire 510 then make sure this image file downloads into your minimal adb and fastboot folder on the computer and it MUST be inside the folder then open a command window within the folder and try flashing the recovery file but first change the name I.E rename the file to recovery.img and then do fastboot flash recovery recovery.img after that type adb reboot recovery and see if it worked.
Click to expand...
Click to collapse
I tried that, the fastboot command returned a reply that said finished. After I tried the adb reboot recovery command it returned "error: device '(null)' not found"
mur1taza said:
I tried that, the fastboot command returned a reply that said finished. After I tried the adb reboot recovery command it returned "error: device '(null)' not found"
Click to expand...
Click to collapse
Download this one then and flash it then try to get into recovery... philz touch recovery
MrMike2182 said:
Download this one then and flash it then try to get into recovery... philz touch recovery
Click to expand...
Click to collapse
I tried that too, it did the same thing.
mur1taza said:
I tried that too, it did the same thing.
Click to expand...
Click to collapse
I don't know then. I don't have enough information about it to help. Don't know if you are 32 or 64 bit. Don't know if you have a stock recovery I really don't know much. I'm pretty sure you're not doing something right... Go over the steps of everything you've done so far please.
MrMike2182 said:
I don't know then. I don't have enough information about it to help. Don't know if you are 32 or 64 bit. Don't know if you have a stock recovery I really don't know much. I'm pretty sure you're not doing something right... Go over the steps of everything you've done so far please.
Click to expand...
Click to collapse
I think its 32 bit. I had previously tried TWRP to install a custom rom and it worked. Now that I want to revert to stock Im getting this error in adb.
mur1taza said:
I think its 32 bit. I had previously tried TWRP to install a custom rom and it worked. Now that I want to revert to stock Im getting this error in adb.
Click to expand...
Click to collapse
What is the exact error you are getting in adb? I need the exact way you see it.
MrMike2182 said:
What is the exact error you are getting in adb? I need the exact way you see it.
Click to expand...
Click to collapse
I finally got to get into TWRP recovery, what do I do now?
mur1taza said:
I finally got to get into TWRP recovery, what do I do now?
Click to expand...
Click to collapse
You need to download a rom and flash it... You can try whichever roms on here you want since your phone is 32 bit.. CM11 is good and so is RaptorRom.. But you can use whatever as long AS it IS for the Desire 510... Download a rom, place it on your SD card and go into recovery an tap install and choose the rom that you put on the SD card... Make sure you read the thread of whichever rom you download since some need a specific Kernel or wifi fix.. Also some times twrp will be set to internal storage and you will need to select the SD storage at the top of the window after you tap install...
MrMike2182 said:
You need to download a rom and flash it... You can try whichever roms on here you want since your phone is 32 bit.. CM11 is good and so is RaptorRom.. But you can use whatever as long AS it IS for the Desire 510... Download a rom, place it on your SD card and go into recovery an tap install and choose the rom that you put on the SD card... Make sure you read the thread of whichever rom you download since some need a specific Kernel or wifi fix.. Also some times twrp will be set to internal storage and you will need to select the SD storage at the top of the window after you tap install...
Click to expand...
Click to collapse
Thanks a lot! And if I want to revert to stock what do I do?
mur1taza said:
Thanks a lot! And if I want to revert to stock what do I do?
Click to expand...
Click to collapse
Just download a stock rom from one of the threads.