Database Develop

[Q] original o2 shipping ROM

Hi,
Since i updated the software on zune to pre-nodo update my camera app does not load, it just goes right back to the menu.
im looking to restore to the shipped software that came with the phone.
RUU_Schubert_O2_UK_1.14.206.01_Radio_5.51.09.06a_22.30.50.09_Signed_SCHUBERT_RELEASE.exe
is the one i believe I have searched hi and lo and cannot find this rom to download, does anyone know where i can download this and also is it possible to update to an earlier firmware using this file? if i put my phone into the correct mode?

milkshake said:
Hi,
Since i updated the software on zune to pre-nodo update my camera app does not load, it just goes right back to the menu.
im looking to restore to the shipped software that came with the phone.
RUU_Schubert_O2_UK_1.14.206.01_Radio_5.51.09.06a_22.30.50.09_Signed_SCHUBERT_RELEASE.exe
is the one i believe I have searched hi and lo and cannot find this rom to download, does anyone know where i can download this and also is it possible to update to an earlier firmware using this file? if i put my phone into the correct mode?
Click to expand...
Click to collapse
Have you tried the camera with the battery fully charged?

indeed i have, camera function does not even load

I found the original stock rom and flashed it it worked no problem, the camera still doesnt work though so must be hardware issue, have spoke to htc they are going to repair/replace it for me.

There seems to be alot of people having this camera issue, I had it too, I also had to send it away for repair.

did anything happen to co inside withe the camera app from not launching? as far as im aware it started when applying the pre-nodo update.
also can i ask, did they replace your phone? or just repair it?

Need the touchscreen firmware

Hi guys. Fist of all, sorry for my bad english.
I bricked my phone's touchscreen, with update firmware in the *#*#2663#*#* and its wrote 'update failed' . My bad, dont do this. Dou you know any solutions? I tried factory reset, flashing roms ( froyo and gongerbread too), but nothing helped. The touchscreen stopped responding. But i think, if i can reflash the touchscreen firmware, it will working. It is possible flash the touchscreen firmware from sd card? Actually where are the files of the driver in the file system?

Can we explain, what happened actually when click on update on the tsp firmware screen? Which application/ script started? I thinks, the touchscreen files are in the tsp ic, which is separated from the flash, so just flashin a new rom dont write data to the tsp ic. But the files must be in the rom too, because some people did the update without problem, and the firmware version is changed, and the touchscreen works better then before. Do you have some ideas? If you have root acces, please browse the system folder, i thinks there is somewhere a "tspupdate" or similar named shell script/application what i need. But dont run it, it can brick your touchscreen too!!!
Sorry for my bad englis.....

problem solved

salmaj said:
problem solved
Click to expand...
Click to collapse
How did you solve it?

Yeah! How did you solve it? I currently have the same problem on my Bell's Vibrant. I also tried reflashing my Gingerbreak and factory reset without any success.
You don't know what you got til it's gone! Back button is really useful!

tasp update
salmaj said:
problem solved
Click to expand...
Click to collapse
Hi buddy, i m facing the same problem, plaease share your solution, as i am stuck and my touchscreen becomes unresponsive after wake up. Really tired of reading the forums. Thanxs a ton budddy
galaxy tab p1000 india

please
salmaj said:
problem solved
Click to expand...
Click to collapse
Please, How did you solve it?

How?????????????????????
salmaj said:
problem solved
Click to expand...
Click to collapse
Please tell me how did you do it

guess op bricked or lied or...
is just being a greedy attention whore?
THIS MAY MAKE THINGS WORSE, BUT SOME DO NOT CARE. DRAGONS AHEAD....
Either way hoarding knowledge is a big peev of mine. I have read about this issue from as many google'able places as possible. I started reading after I went thru the release notes from some of the sX series. I notices that some carriers listed ghost/glove tsp firmware update/support. I also noted as the original poster did, that the files are in the rom. I would guess look thru all the updates your carrier made available and download the specific whole rom update and factory restore / apply it. Should this not work look thru the system folder for the file. When you have it copy it to your sd card where the tsp update screen tells you to put it. Try running the update again.
If this works please confirm this.
I think possible looking in system folder I recall a firmware folder possibly inside lib or modules somewhere.
I read that tsp modes are controlled from, so logically the files should be nearby.
/sys/class/sec/tsp
or depending on phone/model
/proc/touchpanel
I will keep an eye here, I am busy with some debricking and roms in general.

[Q] Random lines through screen after update to v20

So i just updated to V20 Europe Open following this tutorial and the update seemed to go through fine, rebooted, and new firmware installed. After finally setting up the phone as i like, i let it sit to synchronize all my contacts and what not. When i pushed the power button to wake up the phone, there were these random lines over the entire screen, look like blinds.
When i do a battery pull or reboot its back to normal, but everyime i let the phone sit for a couple of minutes and then wake it up, i get the same screen..
Ive attached two screen shots
Any ideas on how to fix this? Thanks.

I had the exact same problem, I didn't find any solution so I had to revert back to v10.
Which v20 did you install? The Portuguese one?

Mottz said:
I had the exact same problem, I didn't find any solution so I had to revert back to v10.
Which v20 did you install? The Portuguese one?
Click to expand...
Click to collapse
Use the same method that you use to roll back (LGFlash Tool) and install Euro_open V20A.
There is no difference between the euro and PT.
All needed files you can find them here:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7

RuedasLocas said:
Use the same method that you use to roll back (LGFlash Tool) and install Euro_open V20A.
There is no difference between the euro and PT.
All needed files you can find them here:
http://forum.xda-developers.com/showpost.php?p=38838927&postcount=7
Click to expand...
Click to collapse
I tried the HK version as well, still having the issue. Do i just need to roll back to V10? Is it a software issue? How come very few people have it if all the versions are the same..?

faraband said:
I tried the HK version as well, still having the issue. Do i just need to roll back to V10? Is it a software issue? How come very few people have it if all the versions are the same..?
Click to expand...
Click to collapse
Might just be a bad flash.
By flashing with LGFlash Tool you don't need to roll back.
Just make sure that you have official firmware, don't use leaked.
To be a hardware problem, you should have it in ICS too...

RuedasLocas said:
Might just be a bad flash.
By flashing with LGFlash Tool you don't need to roll back.
Just make sure that you have official firmware, don't use leaked.
To be a hardware problem, you should have it in ICS too...
Click to expand...
Click to collapse
I tried 3 different routes to get V20A Euro installed, all the installs were successful but the screen issue is still there:
1. LG Flash Tool
2. KDZ_FW_UPD
3. Using LGKDZ hack and LG PC Suite
All of these successfully got V20A installed, but none solved the lines on the screen. I made sure to wipe before and after each install..
Any other ideas?

Perhaps screen is faulty ?

leolipop said:
Perhaps screen is faulty ?
Click to expand...
Click to collapse
I had no issues when on V10H, and nothing happened to the phone during the upgrade, just remained on my desk. When i revert back to V10H i have no issues also. I tried LGFlashTool to roll back to V10H and now have LG PC Suite find and upgrade the phone on its own, will see if that makes a difference...
Thanks

I see...I ll inform a member in another forum whereas he had the same issue.

faraband said:
I had no issues when on V10H, and nothing happened to the phone during the upgrade, just remained on my desk. When i revert back to V10H i have no issues also. I tried LGFlashTool to roll back to V10H and now have LG PC Suite find and upgrade the phone on its own, will see if that makes a difference...
Thanks
Click to expand...
Click to collapse
If after official upgrade doesn't work, I recommend you to take it to LG Service.

RuedasLocas said:
If after official upgrade doesn't work, I recommend you to take it to LG Service.
Click to expand...
Click to collapse
So i am currently in the US, bought the phone brand new unlocked from ebay. I called LG Support, and the rep said that since the phone is international, they cant do anything.. I would have to contact international LG Support to get help..? wtf

faraband said:
So i am currently in the US, bought the phone brand new unlocked from ebay. I called LG Support, and the rep said that since the phone is international, they cant do anything.. I would have to contact international LG Support to get help..? wtf
Click to expand...
Click to collapse
Same problem here. Not in such scale but I think it is the same. I had just bought the phone and when I did the update from the official site of LG te problem occured. I have sent the phone to service and I am waiting for it. Does anybody know if that phone has an international DOA??

Went to service, came back with the same problem. They had to replace it with a new one. I want risk to update again. Will stick with 4.0.

I just got a similar problem but much worse seen in the photo below attached my phone was working for a few weeks before this problem came as i was sat reading it, it just appeared while the screen was on. it also appears at boot and in cwm does this happen for you guys coz i think it's more a hardware problem for me.

Not sure what is causing it, but i went to 4 different repair stores, and none of them could figure it out. I sent it in for warranty, will report back what happens..

I had the same problem on my screen all the time , It's gone now for some reason, only thing i did is relocked the bootloader and unlocked it again since then it been running without any problems for almost a month now.
I remember i used the old method to unlock the bootloader , relocked it and i ran stock v20a(with locked bootloader) for like a month without any problems so i decided to try again , i used the official lg unlock method and now even on other roms it seems fine.
This bug is really annoying though hope ya'll get to fix it .

Try download an other v20 firmware, if that doesnt work, i can recommend superxe rom, its realy fast and stable.
Sent from my LG-P880 using xda app-developers app

I also think that it is a software problem because mine with the original Poland Rom 4.0 worked just fine.After one day of use I decided to upgrade to 4.1 from the original site of LG in Greece.this caused the problem.I believe that the flash caused some malfunction to the gpu.My cousin has the same exact phone for a year now but has never that problem.Maybe LG should give it a look because it seems pretty serious.
Sent from my LG-P880 using xda app-developers app

I had the same problem with V20A! but now I installed the CM10.1 nightly and also with the cyanogenmod appeared the same problem!! is a hardware problem? :crying: how can I fix?? Help me!! :crying:
this is the screenshot of CM10.1! I cut a little the picture!
Sent from my LG-P880 using xda app-developers app

is anyone elses permanently there. since it came on on mine it has never gone off including when booting up, in cwm and whilst in software recovery from flashing original bootloader. the other thing is screenshots look fine when on my pc.

HELP - phone constantly gives camera errors, unable to make phone calls,

Hi guys,
few days ago I bought a used T-Mobile LG G4, It was running the O sofware so I upgrade to N and then to P(rooted thru TWRP). Phone was working great for 3 days(including camera and calls), when all of a sudden it started to give me errors regarding the camera, even when I was not even trying to use the camera. "Unfortunately the camera has stopped working" . I tried to do a factory reset first, which did not solve the issue, the camera error already showed up when the phone came back on in the LG setup.
It also does not allow me to make phone calls, it hangs when I try to press the green call button, and after 5 minutes the phone I was trying to call started to ring, but my LG G4 was still frozen. I also noticed the the boot up time is very slow all of a sudden, stuck on the LG G4 screen for a long time.
Also took the phone apart and re-seated the mainboard connector and camera connector. And tried a different battery and removing the SD-card.
I have tried to do a full wipe (including data, dalvik, cache, and internal) and then reflashed the "LG-G4-H811-20p-stock-rooted" software. Still the same issues. The phone is pretty much useless.
Any help would be gladly appreciated, as I really cant afford another phone at the moment.

corrupt05 said:
Hi guys,
few days ago I bought a used T-Mobile LG G4, It was running the O sofware so I upgrade to N and then to P(rooted thru TWRP). Phone was working great for 3 days(including camera and calls), when all of a sudden it started to give me errors regarding the camera, even when I was not even trying to use the camera. "Unfortunately the camera has stopped working" . I tried to do a factory reset first, which did not solve the issue, the camera error already showed up when the phone came back on in the LG setup.
It also does not allow me to make phone calls, it hangs when I try to press the green call button, and after 5 minutes the phone I was trying to call started to ring, but my LG G4 was still frozen. I also noticed the the boot up time is very slow all of a sudden, stuck on the LG G4 screen for a long time.
Also took the phone apart and re-seated the mainboard connector and camera connector. And tried a different battery and removing the SD-card.
I have tried to do a full wipe (including data, dalvik, cache, and internal) and then reflashed the "LG-G4-H811-20p-stock-rooted" software. Still the same issues. The phone is pretty much useless.
Any help would be gladly appreciated, as I really cant afford another phone at the moment.
Click to expand...
Click to collapse
when you use LGUP do you select refurbushed.?

raptorddd said:
when you use LGUP do you select refurbushed.?
Click to expand...
Click to collapse
thanks for your reply, I never used LGUP, only rooted/unlock bootloader thru terminal. Then, copied roms onto SD-card and flash with TWRP.
I dont know what LGUP is or what the difference is between that and doing it thru TWRP. This is my first LG, before this only had Samsung's

And the phone was working fine for 3 days after I updated it.

corrupt05 said:
thanks for your reply, I never used LGUP, only rooted/unlock bootloader thru terminal. Then, copied roms onto SD-card and flash with TWRP.
I dont know what LGUP is or what the difference is between that and doing it thru TWRP. This is my first LG, before this only had Samsung's
Click to expand...
Click to collapse
Stock official lg formware is KDZ so i suggest to download 20p .kdz along with LGUP program to flash stock formware when using the refurbished option it wipes all partitions. Making it a clean install. I think thays the problem when updating thru twrp from20i to 20o it gave camera amd sound bugs..
Seaech for both20p kdz and LGUP.

raptorddd said:
Stock official lg formware is KDZ so i suggest to download 20p .kdz along with LGUP program to flash stock formware when using the refurbished option it wipes all partitions. Making it a clean install. I think thays the problem when updating thru twrp from20i to 20o it gave camera amd sound bugs..
Seaech for both20p kdz and LGUP.
Click to expand...
Click to collapse
thanks gonna try it

corrupt05 said:
thanks gonna try it
Click to expand...
Click to collapse
if you need help let me know.

raptorddd said:
if you need help let me know.
Click to expand...
Click to collapse
got LGUP ready, should I do UPGRADE, PHONESETTING, OR FOTAUPGRADE?
and will I loose TWRP/root?
edit: guess I can only do UPGRADE with a .kdz file. will let you know if it works

corrupt05 said:
got LGUP ready, should I do UPGRADE, PHONESETTING, OR FOTAUPGRADE?
and will I loose TWRP/root?
edit: guess I can only do UPGRADE with a .kdz file. will let you know if it works
Click to expand...
Click to collapse
To find kdz you must use upgrade.. Once kdz file is located and shows in lgup clpse program the open lgup again. This time it will letypu select refurbished . click start so it cleans all partitions
---------- Post added at 04:14 PM ---------- Previous post was at 04:12 PM ----------
raptorddd said:
To find kdz you must use upgrade.. Once kdz file is located and shows in lgup clpse program the open lgup again. This time it will letypu select refurbished . click start so it cleans all partitions
Click to expand...
Click to collapse
yes youll loose twrp and root you need to instal twrp and root. Then flash waht ever you want. Based on 20p or cm aosp
n
NOTE use only 20o or 20p you cant downgrade from this 2 or phone will brick.

raptorddd said:
if you need help let me know.
Click to expand...
Click to collapse
thanks sooo much .... IT WORKED
THANK YOUUUUU

corrupt05 said:
thanks sooo much .... IT WORKED
THANK YOUUUUU
Click to expand...
Click to collapse
Did those problems or bugs did u got rid od it? If you didnt ise refurbished i suggest to reflash just so everytjing is cleaned..

Is it possible to downgrade from OneUI (Pie) to N960FXXS2ARL4 (8.1) ?

Title says it all. I updated to one ui officialy . (The update came to the phone.) Can i downgrade to N960FXXS2ARL4 using Odin? Is there any brick chance or etc. ? (I don't know much about this stuff.)
Edit: My region is Turkey. The latest android oreo update was N960FXXS2ARL4 (December security update) Android Pie (OneUI ) update is N960FXXU2CSA2.

Flash stock firmware through ODIN, make sure you wipe your device. Everything should be fine.

Should i wipe first or after flashing the stock rom?

After flashing is a must.
Choise for flashing csc_oxm.

Thanks for your replies. I managed to downgrade it. But i have a problem. S-Pen slot doesn't recognize my s-pen. I tried resetting etc. I tried reflashing the rom but it doesn't work.

Galaxy404 said:
Thanks for your replies. I managed to downgrade it. But i have a problem. S-Pen slot doesn't recognize my s-pen. I tried resetting etc. I tried reflashing the rom but it doesn't work.
Click to expand...
Click to collapse
Did you try to pair it from the settings s-pen menu? There is pairing option.
Also downgrading to oreo is understandable, but kinda temp solution if you are not willing to sacrifice a year worth of updates/security patches.

Doesn't work Phone doesn't even detect it when its inside the slot. I had s pen problems before downgrading but it was probably because i dropped spen to water. It made ghost touches while using so i dried it using rice. It was working again but now it doesnt work and the spen button is shown as constantly pressed. In screen of memo its shown as eraser. I cant use it to draw.
Note: After trying everything i figured out that if i reboot my phone with s pen inside it, it would understand that the spen is inside when it boots up. But when i start using my spen, it doesn't register presses on the screen only on the notification bar and air command button. While drawing it recognizes it as an eraser. It thinks that the button is pressed and higlights the texts when pressed.