Database Develop

Internet Sharing problem

So I connect to internet on PC via Kaisers USB which connects to HSDPa.
Problem is that HSDPa connection disconnects aprox. every 8-10mins.
I dont know why, on my Wizard everything works fine.
Where is the problem?
Thanks.

BUMP
So, im using kaisers internet connection on mine PC (internet sharing,usb) and every 10minutes connection drops.
Where is the problem?
Thanks.

Please provide some additional information. Such as: Carrier, ROM version, and Radio version.
I frequently tether for several hours at a time and do not have an issue with disconnects, so there is probably a settings issue that will not come to life until we know a little more about your situation.

NotATreoFan said:
Please provide some additional information. Such as: Carrier, ROM version, and Radio version.
I frequently tether for several hours at a time and do not have an issue with disconnects, so there is probably a settings issue that will not come to life until we know a little more about your situation.
Click to expand...
Click to collapse
Carrier name is "VIP" , location: Europe(Croatia)
ROM: WM 6.1(nothrills)
r 1.65.14.06
g 25.81.40.02H
d 3.14.00.00
I had the same network setup on HTC Wizard and everything worked just fine...

Have you tried any other ROMs or radios? I was able to tether using the NoThrills ROM back when I was running it.
You can also try reflashing the same ROM and radio again in order to eliminate any possible problems stemming from a "bad flash".

Do you have the kaiser tweak installed?

No i didnt try any other ROM or radio..
Everything works fine on that ROM and radio ,only internet sharing is a problem..
And yes i have installed KaiserTweak.

Do you have it set to disconnect your internet?

No i didnt set to automatic dissconnection...

Maybe try another tilt or reset the phone????

huh...i've finally setup everything on this ROM and everything works very nice...so i dont want to flash another ROM (of course if this is only solution, i will..)
strange how nobody had this problem..

NoThrills is a WM6.1 ROM, and your phone would have shipped with a 6.0 based ROM since 6.1 isn't out yet. Did you have this problem prior to flashing to NoThrills?

Well i didnt try on 6.0 original rom...
I've flashed it same day i've got it..
Think i will flash some other ROM..
Any suggestions?
Thanks.

When you say that HSDPA disconnects are you sure it's disconnecting or just downgrading to idle. On my Kaiser I see that when the connection needs to pull data from the net, the icon changes to H (HSDPA) and when idle it changes to just 3G but remains connected. I can see that it remains connected because the signal icon has the 3G logo on top of it.
Cheers!
Rayan

I noticed too that when connection is idle stands 3G icon and when downloading there is H.
But yes, it just disconnects..
When I'm using connection on Kaiser(not internet sharing), it doesn't disconnects..

[Q] Wifi disconnects data network after gingerbread update (i9000m)

Used Odin to update to gingerbread from froyo on my i9000m the other day. Theres no service here at home unless I put the phone on the bathroom windowsill, so I didn't notice until today when I went to work that I wasn't getting any data network connection. Could make and receive calls fine, wifi works, but no data, so no browsing or facebook or any apps that require it. I called bell and they came to the conclusion that I have to send the phone in for repairs. Thats a absolute last resort, so I tried another factory reset, this time from the recovery menu. The first time, during set up I enabled wifi, this time on a hunch I did not, and it worked. Also note that the first time, the network connected for a split second before disconnecting again. Anyways, I was getting 3g fine, then I tried wifi, and it disconnected again. Turn off wifi, data comes back. Whats up with this?

Did you set your APN? Go
Settings > Wireless and Network > Mobile Network > APN Names
Then hit menu and add a new APN if none are there. If one is there, it's named something like 'browser' (at least that's what mine is called on my Bell i9000m) and I'm wrong. But I had this problem, and this is how I solved it. You can find the APN settings for your network by google-ing "[Provider] APN Settings]", and if you're on bell you can find them here:
http://support.bell.ca/en-on/Mobili..._Nexus_One_for_the_Bell_Mobility_HSPA_network
It says Nexus One but it works for all phones on bell.

settings are exactly as depicted on the bell site, except the apn was called browser instead of bell. changed that, same thing. other suggestions?

Can you tell me the version of gingerbread you're on, where you got the files, any mods to the firmware like pre rooting?
Sent from my GT-I9000M using XDA App

2.3.3, downloaded from here, no mods.

Alright, so totally stock. What's the version code? It should be UGKG3. Have you tried forcing a kies update with a registry hack? Was it one PDA when you flashed it or 3 files?
Sent from my GT-I9000M using XDA App

Yes, its UGKG3. I flashed with the PDA, PHONE and CSC files. I dont really know what you are talking about with regards to forcing a kies update, if you could explain I'd try it out

This has always happened to me, on Eclair, on Froyo, and now on Gingerbread. Whenever my Wifi is active *and* connected to a network, the Data through HSPA is automatically disconnected.
I always thought it was a battery saving feature - if you have Wifi access, and presumably internet access, then you don't need internet through the cell network, right?
So if you're not getting internet access when your wifi is active and connected, then perhaps it's a problem with your wifi router not passing external internet to your phone?

The thing is nothing changed besides the firmware. wifi worked fine here in the house before and no problems connecting to the data network on the go with wifi enabled. I'm really running out of ideas here.

I guess I misunderstood you before. Are you saying you have no data access at all when wifi is enabled, whether or not you are connected to a wifi network? If that is true, something is definitely wrong. That doesn't happen to me with KG3 - just checked.
Have you tried reflashing the modem file? Maybe it got messed up in your flash before?
Sent from my GT-I9000M using XDA App

yes, no data regardless of wifi connected or not, as long as its enabled.
which is the modem file?

just an update, this seems to have mysteriously fixed itself.

3G trouble with CM 10.1 on Vodafone Egypt sim card

Hey,
I recently flashed CM10.1 on my note and it's working perfectly well on WiFi, but when i switch to 3G, some apps don't connect and show connection timeout.
I did some digging but found no solution to this problem,
when i tried using market access, 3G connection worked on all the apps it didn't work on before...
Any idea how to fix this issue without having to use market access?

Are you sure your apn is properly setup?
Also you may try a different modem.
Sent from my GT-N7000000000 using Tapastalker 2

I had a problem that from day one (or maybe since I got my ICS update) my 3g was so slow I couldn't use it... when I did a speed test on it I was getting download speeds of 1-2 kbps MAX, upload was 0-1kbps from what I remember. But switching ROMs never helped. When I changed my modem however then I think it fixed the problem... but I haven't had the chance to test it (poor 3g signal where I live). If I were you then I would flash another modem, which one are you on now?

[Q] CM10 and no connection to internet

Hello all,
I flashed CM10.0 a few weeks ago and everything was working fine up until 2 days ago, now my I9000 won't connect to the internet at all. I was using Easy Battery Saver which cancels the data signal everytime the phone is idle, but this stopped turning the connection on. I uninstalled it hoping the phone would revert back to normal but can't get connected. I restored the app hoping it would pick up the settings again but still no joy.
I have wiped everything including user data and the caches, done a factory reset and reflashed the rom. The signal did return for about 30 minutes after the flash but the connection has since died again. I've tried switching on the roaming and national roaming, also no luck.
Does anyone have any idea what might be causing this or even how to fix it?
Thanks in advance

Boogaloo27 said:
Hello all,
I flashed CM10.0 a few weeks ago and everything was working fine up until 2 days ago, now my I9000 won't connect to the internet at all. I was using Easy Battery Saver which cancels the data signal everytime the phone is idle, but this stopped turning the connection on. I uninstalled it hoping the phone would revert back to normal but can't get connected. I restored the app hoping it would pick up the settings again but still no joy.
I have wiped everything including user data and the caches, done a factory reset and reflashed the rom. The signal did return for about 30 minutes after the flash but the connection has since died again. I've tried switching on the roaming and national roaming, also no luck.
Does anyone have any idea what might be causing this or even how to fix it?
Thanks in advance
Click to expand...
Click to collapse
I am just guessing, but as from what I understand you uninstalled the application when you were not having the internet connection working. Right? The correct settings have possibly remained overwritten (some applications block the outgoing data traffic by changing the connection settings). Give APNDroid a try and if unsuccessful try going to your phone operator webpages and find the correct connection settings.
I am using CM10 with APNDroid which works fine. However sometimes I cannot connect to 3G as well. Switching the APNDroid on/off couple of times or rebooting solves the issue.

nameh said:
I am just guessing, but as from what I understand you uninstalled the application when you were not having the internet connection working. Right? The correct settings have possibly remained overwritten (some applications block the outgoing data traffic by changing the connection settings). Give APNDroid a try and if unsuccessful try going to your phone operator webpages and find the correct connection settings.
I am using CM10 with APNDroid which works fine. However sometimes I cannot connect to 3G as well. Switching the APNDroid on/off couple of times or rebooting solves the issue.
Click to expand...
Click to collapse
Thanks for the response mate. You guessed right, APNDroid hasn't fixed it and I haven't been able to find APN settings other than the one that is already in my phone. Might reverting to stock solve the issue? My contract is up at the end of the month so I could handle living with GB until then .

Hi again, reverting back will definitely not solve the issue. From what you had said I understand that the internet settings are somewhat messed up.
These settings are bound to your SIM card. By up/downgrading ROM these remain.
Could you check if your APN settings are correct (I assume you need to check with your provider).
Good luck and keep us informed.
Sent from my GT-I9000 using xda app-developers app

Just found the APN settings online. Reset my APN and it looks to be working. I'll keep an eye on it just in case but I think either the ROM or the App messed up the user/password on the APN.
Hopefully it's all fixed. Thanks for all the help.

first try apn tweaker from market then if no luck what worked for me
1 flash darkyrom 10.2 re
2 alliancerom jw4
3 then jw8
working well for past week

[Q] Droid 4 + JB = Phone or Data - pick one?

I have a Droid 4 with stock 4.0.4 that works perfectly with Polish Orange operator (GSM). I tried to install some JB rom, but when I go to 4.1 or 4.2 I don't have any data connection. At first I thought it was a problem in some particular ROM, so I tried almost all 4.1/4.2 builds I could find on the internet. They all have different options, more or less, but I didn't get data connection on any of them.
The second try was to modify 'something' in build.prop. I had no idea how to start so I checked some tutorials and xda topics and I looked at any options that could be related to data connection. After many tries I started to think that it's just impossible, but then I got the setup with working data , unfortunately the phone application started to hang or FC on all phone connections.
The next thing I could do was to narrow it down. I tried some combinations of build.prop, apns-conf, restarts and wiping and I've found a single setting that changes everything - "telephony.lteOnCdmaDevice". It seems to work this way:
1. Just after the installation of any ROM the option is set to 1. You can make and receive calls and SMS's. Wifi, GPS, etc. works. But regardless of what network options I use, if it's LTE or just 2G GSM, what APNs I set, if I reboot or use airplane mode - there are no data at all.
2. When I change this setting to 0 and reboot I immediatelly get the data connection. I don't even need to set-up APN (In fact it works even with VZW default APN, and I'm on Orange PL). It works on 2G and 3G, on GSM and LTE, I get all networks from Edge to HSDPA. So the phone is able to get data connection. But when I try to make a call the phone app hangs, and when I receive one it FCs.
For both of those cases I tried many different configuration options, with reboots, wipes and so on, to make sure that connection depends on build.prop setting and not on anything else.
So at this point I know that the phone is able to do both connection types, but how to get them at the same time?
BTW: I know about using Google, forum search and so on, I tried to find any clue about resolving this on my own but now I'm just stuck. However I've found something that I didn't find anywhere else, so maybe with your help we'll find some solution .

Ok LTE only works with verizon and apn depends on your network
I'am use a mod I flash thet after rom install and this mod patch the build.prob an add a larg apn list
So only flash the mod an have fun
https://mega.co.nz/#!9kRTCICB!D228WW7MtPUZPWjHRKGcMQVGOixqjQs3a-_77QerNNg
Sent from my XT894 using xda app-developers app

NighPlayer32 said:
So only flash the mod an have fun
(link removed)
Click to expand...
Click to collapse
Thanks for saving my phone @NighPlayer32 . I still got some random shutdown so I need to test it more, before I use it as daily device, but now I see light in this tunnel. The phone and data works, even without any touch in settings.
I'm going to check this mod in more details and understand what it does, so I may get back with some more questions .

Thanks
NighPlayer32 said:
Ok LTE only works with verizon and apn depends on your network
I'am use a mod I flash thet after rom install and this mod patch the build.prob an add a larg apn list
So only flash the mod an have fun
Click to expand...
Click to collapse
Thank you. Works perfectly for me in Czech Republic.