Database Develop

Doesn't go into recovery

I followed the video tutorial and when I flash recovery, then proceed to boot into recovery it fails to boot into recovery, it just flashes then boots like normal when I perm root. I don't know what's going on. I tried the clear cache command with no response.
I have searched and didn't find anything.
Anyone able to help please?

It is most likely you did something wrong when you flashed the recovery img, just follow the tuto again and make sure to follow each step.
Here is a guide made by mike: http://forum.xda-developers.com/showthread.php?t=2265618

I have done that. Tried a few times. I am fairly "in the know" with rooting ect, but I just can't figure this out.

Disable fast boot
Sent from my PadFone 2 using Tapatalk 4 Beta

Did you reboot after flashing the recovery or did you just go straight into it? I had the same problem and what fixed it is rebooting after flashing the recovery 'fastboot flash recovery recovery.img'.

samflorin said:
Disable fast boot
Sent from my PadFone 2 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Tried that.
TarekElsakka said:
Did you reboot after flashing the recovery or did you just go straight into it? I had the same problem and what fixed it is rebooting after flashing the recovery 'fastboot flash recovery recovery.img'.
Click to expand...
Click to collapse
Tried that to.
When I press perm root, it just reboots normal like recovery doesn't even exist.

Have you tried flashing stock recovery and trying to boot in it? I know that doesn't fix anything, I am just curious if your device will actually boot into any recovery state at all. I have read on XDA about some devices not being able to boot into recovery for some reason.
Here's the stock recovery, just in case: http://forum.xda-developers.com/showthread.php?p=38504123

Okay give me a shot at that.
I noticed after flashing recovery, mine doesn't tampered like it should?

The stock recovery says it's not available anymore.

If it doesn't say TAMPERED then the recovery must have not been flashed to begin with and that is why it's not booting into it. Which recovery are you trying to install? I use TWRP 2.5.0 and I flashed it with fastboot then restarted and it booted fine. My device is S-ON, by the way, and running Trickdroid 7.5.
US Developer Edition Recovery: http://d-h.st/b5g
T-Mobile Recovery: https://www.dropbox.com/s/hvs38223dfrzsny/recovery_tmobile.img
I am not sure if either one will work with your device since I am guessing it's international? But they might be worth a shot.
Never mind, I found the stock international recovery for you: https://dl.dropboxusercontent.com/u/22045273/htc1-stock-recovery.img it was on page 4 of the thread. Give it a go.

I flashed the stock recovery and it still boots like there is no recovery there. and it doesn't say "tampered"
This is crap
EDIT: Yeah I figured it's not being flashed since it's not tampered, but no matter what I try it won't flash.
I'm navigating to the folder: CD C:\One_All-In-One_Kit_v\Data\Recoveries then typing fastboot flash recovery recovery.img and it doesn't work.
It says it's flashed ect, but doesn't boot into it, nore show tampered.

This is very weird and unfortunately I do not know the solution to that. I do not use the All-In-One-Kit, actually, but just a mini-SDK with fastboot files inside. I use shift + right click and "open command prompt window here" rather than navigate to the location, it's just much easier that way. Can you try flashing the latest TWRP recovery?

aussiesausage said:
I followed the video tutorial and when I flash recovery, then proceed to boot into recovery it fails to boot into recovery, it just flashes then boots like normal when I perm root. I don't know what's going on. I tried the clear cache command with no response.
I have searched and didn't find anything.
Anyone able to help please?
Click to expand...
Click to collapse
Are you under s-off ?

tash2013 said:
Are you under s-off ?
Click to expand...
Click to collapse
Nope S-ON
I just downloaded TWRP and flashed it ( fastboot flash recovery recovery.img ) it said all the jabber, like it worked, rebooted and still no "tampered" just reboots like nothing ever happen.
I give up.

Would ADB be any better?

Ugh man that's horrible. I honestly do feel your frustration because I have faced similar situations with my HTC devices (One X and One) countless times, and it sucks because you know the correct steps yet it's not working. I sure hope someone knowledgeable about this can come in and help you. Best of luck.
EDIT: I have only used ADB to sideload a ROM but I don't know about flashing recoveries. If you know how to do it, then why not? It's worth a shot for sure.
EDIT #2: And if you're not familiar with ADB, this article should get you started: http://www.howtogeek.com/125769/how-to-install-and-use-abd-the-android-debug-bridge-utility/
Make sure you follow all the steps to the word and also install HTC Sync Manager for the proper drivers to be loaded.

I know right, driving me nuts.
I've never done adb to flash a recovery before but don't know if I would want to be the pidgeon to try lol

aussiesausage said:
Nope S-ON
I just downloaded TWRP and flashed it ( fastboot flash recovery recovery.img ) it said all the jabber, like it worked, rebooted and still no "tampered" just reboots like nothing ever happen.
I give up.
Click to expand...
Click to collapse
Try reboot to system (OS), then power off , then go to bootloader -> try enter to recovery again

tash2013 said:
Try reboot to system (OS), then power off , then go to bootloader -> try enter to recovery again
Click to expand...
Click to collapse
Tried that, no go.
Also checked the drivers, re-installed no go.
I am quite up there with adb, but not with flashing recovery with a HTC device lol.

There seems to be another method for flashing recoveries besides fastboot.
http://androidforums.com/cdma-evo-3...lash-recovery-image-via-fastboot-sd-card.html
This is an HTC Evo section but it could work for the One as well, although I am not sure of it. I have done some Googling and I did not come across any articles/threads saying that it is possible to flash a recovery using ADB, so that might not be possible.

[Q] How can I reinstall a good image after flashing my boot with CWM?

My question is similar to 'nikpmr's troubles but different enough I think they deserve a separate post.
The Problem as Understood​I was trying to root my device following the guide at this website. It's so simple it's a wonder I messed up. I think my failure was that I thought the drivers installed when I connected the phone were enough so I skipped that step. Then when running fastboot flash recovery.img the install failed. So I saw on some forum that it was supposed to be fastboot flash boot recovery.img of course now I know if anything it ought to have been "recovery" not "boot".
What I've Tried & Partial Solution​At first I was just stuck in a boot loop and selecting "sideload" from the CWM recovery failed to allow me to connect with ADB or fastboot. i.e. Running "fastboot devices" and "adb devices" both returned as having no devices connected to my computer. So I installed the HTC Sync and promptly uninstalled the non driver parts of the app. Then I installed USBdeview and used it to uninstall all the USB devices associated with my HTC First. After doing that I learned booting into HBOOT allowed me to connect to the computer using fastboot and after then booting to the CWM Recovery I was able to connect using ADB to do a sideload. So I guess I'm about halfway there. Unfortunately after looking up the newest RUU and attempting to sideload it using "adb sideload OTA_MYST_UL_1.08.502.1-1.08.502.4.zip" the sideload failed. After selecting "- install zip from sideload" I get a message twice of "failed to open driver control: No such file or directory". It also failed when I attempted it with a similar fastboot command. So from all that I surmise my ROM is ruined and just needs to be replaced.
Question​So how do I go about replacing this ROM and boot partition? And, which ROM should I use? Is the one I got from the RUU site suitable? And what about the radio? I just need my phone to work. I can worry about rooting later. At this point I think I know what's happened but I don't know where to begin reading to figure out how to fix it myself.
Thanks for reading,
Relevant HBOOT text:
Code:
*** TAMPERED ***
*** UNLOCKED ***
MYSTUL PVT SHIP S-ON RL
HBOOT-2.00.0000
RADIO-1.15.40.00.13_2
OpenDSP-v9.2.0268.1214
eMMC-boot
Mar 22 2013,21:29:50:1682

1. you had to type in fastboot flash recovery recovery.img NOT fastboot flash boot recovery.img

Well there was an actual all in 1 tool to get cwm/twrp & root with a click for this specific device somewhere around these threads.
1) what exactly is the problem? (Sorry it was just so many words)
I don't think side loading the RUU would work bc I haven't heard its possible to flash it in the phone itself.
2) why don't you just sideload an existing pre-rooted ROM instead of the RUU file?
3) I see you're s-on, did you try flashing just the boot.IMG from the ROM you've got on it?
BTW I've only had luck with twrp on having it successfully detected when wanting to sideload

abrahammmmmmm_ said:
Well there was an actual all in 1 tool to get cwm/twrp & root with a click for this specific device somewhere around these threads.
1) what exactly is the problem? (Sorry it was just so many words)
I don't think side loading the RUU would work bc I haven't heard its possible to flash it in the phone itself.
2) why don't you just sideload an existing pre-rooted ROM instead of the RUU file?
3) I see you're s-on, did you try flashing just the boot.IMG from the ROM you've got on it?
BTW I've only had luck with twrp on having it successfully detected when wanting to sideload
Click to expand...
Click to collapse
1) The issue is I did "fastboot flash boot recovery.img" rather than "fastboot flash recovery.img" now I don't seem to have a boot mount point.
2) That sounds best. I didn't realize the RUU want a flashable ROM. More I just have to find the updated stable stock ROM.
3) I didn't have a ROM on it. I was just trying to root stock. Seems like I'm pretty close once I find that ROM.
Thanks y'all! Between your answers I think I have enough to go on. Feel free to point me to your preferred stable ROM. I'm content with stock but it would be nice to have Tiranium BU.

bnjo said:
1) The issue is I did "fastboot flash boot recovery.img" rather than "fastboot flash recovery.img" now I don't seem to have a boot mount point.
2) That sounds best. I didn't realize the RUU want a flashable ROM. More I just have to find the updated stable stock ROM.
3) I didn't have a ROM on it. I was just trying to root stock. Seems like I'm pretty close once I find that ROM.
Thanks y'all! Between your answers I think I have enough to go on. Feel free to point me to your preferred stable ROM. I'm content with stock but it would be nice to have Tiranium BU.
Click to expand...
Click to collapse
Right now our most stable stock ROM is our rooted stock ROM
http://forum.xda-developers.com/showthread.php?t=2287811
We currently have 2 very able recognized devs working on CyanogenMod. You can expect something new in the near future but until then what I've showed you is the best.
Have any problems just come back to the thread

Success!
abrahammmmmmm_ said:
Right now our most stable stock ROM is our rooted stock ROM
http://forum.xda-developers.com/showthread.php?t=2287811
We currently have 2 very able recognized devs working on CyanogenMod. You can expect something new in the near future but until then what I've showed you is the best.
Have any problems just come back to the thread
Click to expand...
Click to collapse
Thanks guys I know I always like to know when something I said was successful in helping someone. I just wanted yall to know after sideloading the most recent Odexed ROM then pushing it to memory after it wouldn't boot I succeeded after taking abrahammmmmm's advice of flashing the boot.img from HBOOT. After a longer boot than I'm used to I was able to get into my phone again. I wasn't able to use my TitaniumBU to restore but that just meant I had to spend a few minutes selecting apps to install.. And restoring a data backup for the only important app that doesn't keep the primary data off the phone.
Thanks again!
tl;dr Flashing the Odexed ROM boot.img fixed my issues. Thx!

bnjo said:
Thanks guys I know I always like to know when something I said was successful in helping someone. I just wanted yall to know after sideloading the most recent Odexed ROM then pushing it to memory after it wouldn't boot I succeeded after taking abrahammmmmm's advice of flashing the boot.img from HBOOT. After a longer boot than I'm used to I was able to get into my phone again. I wasn't able to use my TitaniumBU to restore but that just meant I had to spend a few minutes selecting apps to install.. And restoring a data backup for the only important app that doesn't keep the primary data off the phone.
Thanks again!
tl;dr Flashing the Odexed ROM boot.img fixed my issues. Thx!
Click to expand...
Click to collapse
Great! glad to hear I could help. Yes it's always nice knowing when something I've said has helped someone in any way

bnjo said:
Thanks guys I know I always like to know when something I said was successful in helping someone. I just wanted yall to know after sideloading the most recent Odexed ROM then pushing it to memory after it wouldn't boot I succeeded after taking abrahammmmmm's advice of flashing the boot.img from HBOOT. After a longer boot than I'm used to I was able to get into my phone again. I wasn't able to use my TitaniumBU to restore but that just meant I had to spend a few minutes selecting apps to install.. And restoring a data backup for the only important app that doesn't keep the primary data off the phone.
Thanks again!
tl;dr Flashing the Odexed ROM boot.img fixed my issues. Thx!
Click to expand...
Click to collapse
i think what happened, when you typed in "fastboot flash boot recovery.img" is this
boot, is also known as kernel in aosp and rom building terms, because if you look inside a rom.zip, you will see that the kernel is the boot.img
so what happened is you flashed a recovery as kernel, and duh it wont boot cause if the kernel doesnt work, the os doesnt either
so what YOU did is you simply reflashed the stock kernel, usually after changing a kernel, it takes a while to boot cause...well you get it right?
the kernel is what android is based off of, kind of like ubuntu, its a linux os based on the original linux kernel.

russian392 said:
usually after changing a kernel, it takes a while to boot cause...well you get it right?
Click to expand...
Click to collapse
Yes I get it.
russian392 said:
i think what happened, when you typed in "fastboot flash boot recovery.img" is this
boot, is also known as kernel in aosp and rom building terms, because if you look inside a rom.zip, you will see that the kernel is the boot.img
so what happened is you flashed a recovery as kernel, and duh it wont boot cause if the kernel doesnt work, the os doesnt either
so what YOU did is you simply reflashed the stock kernel, usually after changing a kernel, it takes a while to boot cause...well you get it right?
the kernel is what android is based off of, kind of like ubuntu, its a linux os based on the original linux kernel.
Click to expand...
Click to collapse
That's what I thought happened. If I had stopped to read the help on fastboot before running "fastboot flash boot recovery.img" I wouldn't have made that mistake because I would have seen I wanted to flash recovery. One thing I *did not* know, which I'm glad to know, was that the boot.img contains the kernal. I was thinking Android was more similar to IBM style PCs than it is and therefore the boot.img was analogous to a bootloader like grub or lilo.
So the one thing I don't get is how is partitioning done? I take it Androids have some reserved partition for boot and the boot.img takes care of all system partitioning and mounts /sdcard/ for everything else. i.e. userland; appdata, media, and files. Am I guessing correctly?

bnjo said:
So the one thing I don't get is how is partitioning done? I take it Androids have some reserved partition for boot and the boot.img takes care of all system partitioning and mounts /sdcard/ for everything else. i.e. userland; appdata, media, and files. Am I guessing correctly?
Click to expand...
Click to collapse
in a nutshell yes, the boot.img uses the fstab
btw 10 posts you'll be "verified"

So the one thing I don't get is how is partitioning done? I take it Androids have some reserved partition for boot and the boot.img takes care of all system partitioning and mounts /sdcard/ for everything else. i.e. userland; appdata, media, and files. Am I guessing correctly?
Click to expand...
Click to collapse
Yep that's correct.
The name correlation is booting up requires kernel there for kernel is called beet.IMG
Thing about custom kernels, they aren't like that and simply contain modded files and pretty much an in packaged kernel.
Sent from my HTC first using xda app-developers app

stock recovery
please can anyone send me the stock recovery.img
when i try to get it from RUU it says archive is corrupted

astrit1995 said:
please can anyone send me the stock recovery.img
when i try to get it from RUU it says archive is corrupted
Click to expand...
Click to collapse
here:
http://androidfiles.org/getdownload.php?file=MystUL/Stock_Roms/stockrecovery.img
if you help, press thanks!!

Serupo said:
here:
http://androidfiles.org/getdownload.php?file=MystUL/Stock_Roms/stockrecovery.img
if you help, press thanks!!
Click to expand...
Click to collapse
Thank you for your help,i solved my problem yesterday but i think im gona need this sometime...

[Q] After flashing TWRP, XT1063 only boots to the unlocked warning screen

My apologies if this has already been posted. I've been looking all morning but haven't seen anyone with the same issue.
Unlock bootloader: no problem.
Flash TWRP: I downloaded from http://teamw.in/project/twrp2/275, and I got an error about partition size mismatch, but that's ok, right?
But when I try to enter recovery, all I get is the warning screen that my phone is unlocked. The drivers are certainly installed correctly, and fastboot is working fine. I just can't get into recovery to flash a ROM!

Restoring to 4.4.4 stock worked like a charm.
http://forum.xda-developers.com/mot...dows-tool-moto-g-2014-xt1064-restore-t2957167
I've re-enabled USB debugging. Do I dare try to flash a custom recovery again?

Pandae said:
Do I dare try to flash a custom recovery again?
Click to expand...
Click to collapse
You can use Flashify to make a backup of your current recovery and to flash TWRP.img. should work like a charm.

But Flashify requires root, I see? The reason I'm trying to flash a custom recovery is so I can root in the first place.

Pandae said:
But Flashify requires root, I see? The reason I'm trying to flash a custom recovery is so I can root in the first place.
Click to expand...
Click to collapse
You're right. Latest motorola driver and [TOOL]Minimal ADB and Fastboot will do the trick.

Sorry, I should have clarified that when flashing TWRP, I've already been using fastboot.exe from a command line (and administrator level), with the drivers correctly installed. That's how I was able to unlock in the first place.
I did try it with the version of Fastboot you linked to (what I have works peachy for my Nexus 7), still the same thing. I can't boot into recovery and only get stuck at the Motorola unlocked warning.

Pandae said:
I can't boot into recovery and only get stuck at the Motorola unlocked warning.
Click to expand...
Click to collapse
Oh. Sorry. Can you post the output (terminal & device) of
Code:
fastboot devices
fastboot flash recovery NAME_OF_RECOVERY.img

I'd done "fastboot devices" already to verify, and it returns the serial number, though as I said it's clearly working since I was able to unlock as well as flash recovery. I'm flashing "TWRP2801-titan-motog-2014.img" that I downloaded from the TWRP site, and fastboot gives the standard messages about size and success (and my phone gives the size mismatch error).
It's so strange to me. I've flashed a custom recovery dozens of times on both generations of my Nexus 7s, but I've never seen this.

Pandae said:
It's so strange to me.
Click to expand...
Click to collapse
Yeah......have to meditate about that problem....... is your battery low? Fastboot mode of the device gives me all sorts of problems if it detects low battery

I had been using fastboot at 100% (literally finished a full charge) and 84%, but thanks for the continued attempts at explanation.

Oh, did you check the md5 checksum of your download?

Ah, good thought! I rarely do, but I did just now...and they're the same. It's crazy, isn't it?

Pandae said:
Ah, good thought! I rarely do, but I did just now...and they're the same. It's crazy, isn't it?
Click to expand...
Click to collapse
If you are willing to risk it, try a fresh download and try again. I've flashed TWRP more than 20 times by now and never recieved an error whatsoever. It basically the easiest thing to do.
Incase you are stuck again, don't reflash the entire stock rom. Just flash the recovery.img from the stock rom files.
OR
Try this:
HOW TO ROOT MOTO G 2014 with Temporary Custom Recovery
Cheers

I've flashed a custom recovery many a time and have helped people through it, though on Nexus 7s.
Now shall I compound the mystery? I didn't think yet to use ADB to make my phone reboot to recovery. I had assumed recovery wasn't working. So here we go, after booting into Android:
adb reboot devices: my phone's there.
adb reboot recovery: TWRP's working?! And now root is complete!
It doesn't make sense to me why I can't get into recovery from the bootloader, but I can get into it with the simple ADB command. But I appreciate all the help, thanks!

Pandae said:
It doesn't make sense to me why I can't get into recovery from the bootloader
Click to expand...
Click to collapse
A little workaround:
Install Android Terminal Emulator
Add "Term shortcut" widget.
In "Arguments" enter
Code:
su -c reboot recovery

Need help upgrading to 5.1, Tired of flashing all the things.

My nexus 6 is unlocked and is running stock 5.0.1, rooted. . It has twrp and is decrypted.
I tried to sideload the 5.1 ota but it doesnt work.
I tried flashing the new 5.1 factory image but that doesnt work.
I'm tired of all this now, I just want my phone running stock 5.1 , locked , encrypted ,unrooted so I can just get ota next time from Google whenever they send it out.
Any guidance on what I need to do would be appreciated.

Use Wug's Nexus Root Toolkit :good:
Edit : Now I'm currently "Optimising app..." loop.

I tried using tge NRT to flash it back to stock but it didn't work.

I would first make a TWRP backup, then I would flash the boot image (decrypted if you want and make sure its the new one), system, radio and then reboot. I flashed everything fine while keeping twrp on my phone but I didn't like not having a custom ROM plus it was a little laggy so I restored a TWRP backup. My phone did bootloop for a while but eventually it booted 5.1. I would be careful since 5.1 seems to be having some issues in general.

http://forum.xda-developers.com/nex...gs-nexus-root-toolkit-v1-9-8-t2947452/page101
Quote:
Originally Posted by baudi11
Same thing happened to me. Here's what I did.
1. Press and hold power, volume up, and volume down. Keep holding them down until the phone boots into bootloader mode.
2. Go back to the toolkit and click the radio button labeled "Soft bricked/bootloop"
3. Click "Flash stock plus unroot"
4. Check all the boxes under "Settings", including "Post-flash factory reset" then click OK.
5. Follow the toolkit instructions from there.
This got me out of the bootloop, successfully installed 5.1, and kept all my apps and settings. Good luck.
Click to expand...
Click to collapse
It worked for me after that. Now I'm booted in 5.1

When I try to flash the factory images directly from Google I get the following errors even though the MD5 checks out.
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
failed to allocate 1778070480 bytes
error: update package missing system.img
Press any key to exit...

celeriL said:
http://forum.xda-developers.com/nex...gs-nexus-root-toolkit-v1-9-8-t2947452/page101
It worked for me after that. Now I'm booted in 5.1
Click to expand...
Click to collapse
Thanks so much! This worked perfectly. Exactly what I needed. The past couple days have been so annoying but now it's over. Thanks again!

Giuseppe1010 said:
Thanks so much! This worked perfectly. Exactly what I needed. The past couple days have been so annoying but now it's over. Thanks again!
Click to expand...
Click to collapse
Glad to help!

You also could have extracted the zip and manually flashed the images ing fastboot
fastboot flash recovery recovery.img
fastboot flash system system.img
Etc

rootSU said:
You also could have extracted the zip and manually flashed the images ing fastboot
fastboot flash recovery recovery.img
fastboot flash system system.img
Etc
Click to expand...
Click to collapse
HaHaa. Tried and true. Always works.

prdog1 said:
HaHaa. Tried and true. Always works.
Click to expand...
Click to collapse
rootSU said:
You also could have extracted the zip and manually flashed the images ing fastboot
fastboot flash recovery recovery.img
fastboot flash system system.img
Etc
Click to expand...
Click to collapse
I agree that always works without fail and is much easier than a tool kit. I don't like tool kits because people need to learn the correct way to flash things before using one because its better to understand what you are flashing should there be an error.

Pilz said:
I agree that always works without fail and is much easier than a tool kit. I don't like tool kits because people need to learn the correct way to flash things before using one because its better to understand what you are flashing should there be an error.
Click to expand...
Click to collapse
I totally agree. Have done successful manual flash when tool kits failed. Seen on Nexus 6 already.Saved my soft brick with manual flash when tool kit failed.

Pilz said:
I agree that always works without fail and is much easier than a tool kit. I don't like tool kits because people need to learn the correct way to flash things before using one because its better to understand what you are flashing should there be an error.
Click to expand...
Click to collapse
I don't have anything against toolkits on some devices, so long as it is not used as a shortcut to learning the basics. That said, on a nexus, I don't really see any need to be honest.

rootSU said:
I don't have anything against toolkits on some devices, so long as it is not used as a shortcut to learning the basics. That said, on a nexus, I don't really see any need to be honest.
Click to expand...
Click to collapse
Thats how I feel because its so easy my wife could do it and she doesn't know anything about flashing. Toolkits are good for non Nexus devices, I just don't see a point when we need to learn things the correct way first.
I hope the bugs get sorted out so people don't hard brick their phones anyone

rootSU said:
You also could have extracted the zip and manually flashed the images ing fastboot
fastboot flash recovery recovery.img
fastboot flash system system.img
Etc
Click to expand...
Click to collapse
Im a complete fastboot novice since this is my first nexus device (always had samsung phones up until now) and although I managed to root and unlock the boot loader I want to make sure I learn all the basics including flashing (side loading?) subsequent updates.
So Im currently rooted, unlocked bootloader on a 5.01. custom rom. How would I go about flashing the 5.1 update manually?
Im assuming that once I extract the update zip file I will find all the images that need to be flashed....what order do i do them in? How do I take into account the boot loader locking issue people have been facing that results in a bricked device?
Thanks in advance.
EDIT: I found this thread which outlines what I need to do http://forum.xda-developers.com/nexus-6/general/using-image-to-update-nexus-6-data-loss-t3053158
I only have two question now:
1. Im assuming the system image will wipe out the custom rom im on but not the data will leaving the data cause a problem? whats the command line to wipe data?
2. This doesnt address the boot loader locking issue causing a brick that people have been facing. This process involves updating the boot loader what do i have to do to make sure I dont brick my device?
Thanks again

kingofkings11 said:
Im a complete fastboot novice since this is my first nexus device (always had samsung phones up until now) and although I managed to root and unlock the boot loader I want to make sure I learn all the basics including flashing (side loading?) subsequent updates.
So Im currently rooted, unlocked bootloader on a 5.01. custom rom. How would I go about flashing the 5.1 update manually?
Im assuming that once I extract the update zip file I will find all the images that need to be flashed....what order do i do them in? How do I take into account the boot loader locking issue people have been facing that results in a bricked device?
Thanks in advance.
EDIT: I found this thread which outlines what I need to do http://forum.xda-developers.com/nexus-6/general/using-image-to-update-nexus-6-data-loss-t3053158
I only have two question now:
1. Im assuming the system image will wipe out the custom rom im on but not the data will leaving the data cause a problem? whats the command line to wipe data?
2. This doesnt address the boot loader locking issue causing a brick that people have been facing. This process involves updating the boot loader what do i have to do to make sure I dont brick my device?
Thanks again
Click to expand...
Click to collapse
You could simply not update the bootloader. Bare minimum requirements is update system and boot (kernel). if you want to learn more about fastboot, go to general > All in one guide > Question 28.
If you do not update the bootloader, you'll never get an OTA but it doesn't seem like you're wanting that anyway.
In regards to data, yes it could cause a problem if you're using a custom rom. You can use fastboot erase data command. This also wipes your /sdcard though.

bootloop. & bootloader is locked. And I do not have usb debugging enabled

bootloop. & bootloader is locked. And I do not have usb debugging enabled. Any way to get around this?

Depends... You're quite sparse with information about what you've done to get to where you are and about your setup.
A few options come to mind. If you have TWRP you can try flashing a custom rom zip and that could fix it. You could also try the special N preview OTA that google provided to fix phones that got screwed up by an N OTA. http://forum.xda-developers.com/nexus-6/general/to-save-bricked-nexus-device-t3334660

Yeah sorry about that. While updating to 6.0 the phone died. And is now stuck in a bootloop (stuck at the google logo screen). I was trying to use nexus root toolkit to flash stuck android back onto it, however my bootloader is locked. And I did not have usb debugging enabled either. So I am trying to find a way to unlock my bootloader. If that makes any sense

Use the second method I suggested. Should work.

Can you get in bootloader or recovery mode?
http://forum.xda-developers.com/nexus-6/general/to-save-bricked-nexus-device-t3334660
Try to sideload shamu-ota-npc91k-201dd8d1.zip. (This upgrades to Android N Preview.)

Since the OTA is a complete image, it should restore the device to working condition. Then you should be able to enable USB debugging and OEM unlock so the bootloader can be unlocked through fastboot.

Sorry for the late replies. I am attempting the second method & I am able to boot into recovery mode. However I keep getting "adb server is out of date" so I am trying to work it out at the moment

This worked for me! Locked bootloader, no usb debugging, no custom recovery, stuck in bootloop due to software issues.

Bootloader showing engineering
Hi,
I-ve attempted to do the manual upgrade from Android 5.0 to 6.0.1, when running the restart on my Motorola Nexus 6. the screen is showing Bootloader status> Engineering mode.
Somebody told me I would not be able to update this phone because is a prototype or something like that, I need help with this.... thank you!!

Warhammer143 said:
Hi,
I-ve attempted to do the manual upgrade from Android 5.0 to 6.0.1, when running the restart on my Motorola Nexus 6. the screen is showing Bootloader status> Engineering mode.
Somebody told me I would not be able to update this phone because is a prototype or something like that, I need help with this.... thank you!!
Click to expand...
Click to collapse
have you tried manually flashing/updating your bootloader, via fastboot or flashable zip?

simms22 said:
have you tried manually flashing/updating your bootloader, via fastboot or flashable zip?
Click to expand...
Click to collapse
tried many things but not sure..
Is there any thread where I can find the instructions???

Warhammer143 said:
tried many things but not sure..
Is there any thread where I can find the instructions???
Click to expand...
Click to collapse
well, instructions, probably not. if its a flashable zip, that means that you can use twrp recovery to flash it. fastboot flashing has to be done while youre in the bootloader, using fastboot. the command is.. fastboot flash bootloader zipname.img

right now am using nexus root toolkit V 2.1.6.....
look. I am really a noob on this topic .... don't know what to do....

Warhammer143 said:
right now am using nexus root toolkit V 2.1.6.....
look. I am really a noob on this topic .... don't know what to do....
Click to expand...
Click to collapse
well, being a noobie, use google to find out about twrp recovery and about fastboot flashing. fastboot flashing would be more important to you, as twrp recovery use is simple when you already have it installed. unfortunately, im at work at the moment, so cant really help out to much.

simms22 said:
well, being a noobie, use google to find out about twrp recovery and about fastboot flashing. fastboot flashing would be more important to you, as twrp recovery use is simple when you already have it installed. unfortunately, im at work at the moment, so cant really help out to much.
Click to expand...
Click to collapse
Well, I will be searching on google, but thanks a lot!