I recently ran the towelie root for my 4.2.1 phone which worked fine and ran that way long enough to install some apps and had no problems after that either.
However after installing the camera update 139.14.1 it now turns on, sits there working and I can use it for about 10 seconds before turning off and restarting.
Did this screw up my recovery? The recovery option in bootloader does a normal boot and nothing else. Any suggestions are welcome.
I managed to fix this once I had access to a laptop/ADB. Just a simple erase userdata and erase cache and it booted right up with a clean slate.
Related
Hi
I have had Slim ICS 4.2 working ok for a month or so. Yesterday it suddenly started to give FC to all apps, so I rebooted it. The only thing that changed was that, when trying to update the Adaway lists, it gave me an error and could not do it. From that moment, it was stuck in the Slim logo for three reboots. After that, it started a reboot loop, showing the semaphore logo and rebooting back again. I have managed to enter Recovery by connecting it to a USB cable, after some reboots it gets into it. Three button combo was working for Download Mode but not for Recovery.
Can I simply reflash Slim ICS, without doing a wipe? I don´t want to lose my apps, at least not before backing the data conveniently. It would suffice to be able to boot and do a Titanium Backup, then move on to Slimbean or something. I still have the original zips I used to install it.
Thanks!
Hi,
So recently KitKat is released for AT&T Moto X's. Excited, I decided to upgrade the phone to KitKat.
I was previously rooted with RockMyMoto, and before updating to KitKat, I went to unroot the phone through the SuperSU app that was installed.
As I was unsure if it was really unrooted, I opened up Titanium Backup (which required root) and it popped up with an error that Titanium Backup wouldn't work because my device was not rooted.
So with this confirmation (a really noob way to check), I went ahead to download the update through the default system settings app. After the download, I proceeded to install it.
Before installing the update, it said the phone will shut down and proceed with the update, which takes around 20 minutes, and it will be done once it boots up again. And this is where the problem comes. After the phone switched off, the phone just reboots immediately, as if it was just restarting. And after 30 seconds or so, the phone switches off and restarts again. Initially, I thought this was normal, but it kept on restarting and I knew something was up.
I don't know what to do now. I have tried holding down the volume buttons and power button to reboot into recovery, but every time I select the recovery option, the phone just reboots like normal and does not reboot to recovery. I even tried to "race against time" and restore my phone through settings app, but it doesn't allow me to.
What can I do? Please help me
I looked up on the internet, and it seems that I have to remove the OTA cache from the cache folder, but how can I do it? I don;t have root access anymore...
EDIT: FIXED, PLEASE DELETE
darylbu said:
Hi,
So recently KitKat is released for AT&T Moto X's. Excited, I decided to upgrade the phone to KitKat.
I was previously rooted with RockMyMoto, and before updating to KitKat, I went to unroot the phone through the SuperSU app that was installed.
As I was unsure if it was really unrooted, I opened up Titanium Backup (which required root) and it popped up with an error that Titanium Backup wouldn't work because my device was not rooted.
So with this confirmation (a really noob way to check), I went ahead to download the update through the default system settings app. After the download, I proceeded to install it.
Before installing the update, it said the phone will shut down and proceed with the update, which takes around 20 minutes, and it will be done once it boots up again. And this is where the problem comes. After the phone switched off, the phone just reboots immediately, as if it was just restarting. And after 30 seconds or so, the phone switches off and restarts again. Initially, I thought this was normal, but it kept on restarting and I knew something was up.
I don't know what to do now. I have tried holding down the volume buttons and power button to reboot into recovery, but every time I select the recovery option, the phone just reboots like normal and does not reboot to recovery. I even tried to "race against time" and restore my phone through settings app, but it doesn't allow me to.
What can I do? Please help me
I looked up on the internet, and it seems that I have to remove the OTA cache from the cache folder, but how can I do it? I don;t have root access anymore...
EDIT: FIXED, PLEASE DELETE
Click to expand...
Click to collapse
How did you fix it?
I am having this very same problem. My phone just today went into boot loop. Running KangKat on unlocked 1053 with Faux kernel. No boot logo or anything. The phone just vibrates then after 30 seconds or so, it vibrates again. It does this non-stop.
I can plug my phone into USB and the phone's contents come up on my computer, but I can't get the screen to turn on!! Any ideas?
Recovery
Globalrebel said:
I am having this very same problem. My phone just today went into boot loop. Running KangKat on unlocked 1053 with Faux kernel. No boot logo or anything. The phone just vibrates then after 30 seconds or so, it vibrates again. It does this non-stop.
I can plug my phone into USB and the phone's contents come up on my computer, but I can't get the screen to turn on!! Any ideas?
Click to expand...
Click to collapse
Are you able to hold power + volume to get in to your recovery?
Then you can reinstall your nandroid. Or, then you can flash a different rom.
MikeNaples said:
Are you able to hold power + volume to get in to your recovery?
Then you can reinstall your nandroid. Or, then you can flash a different rom.
Click to expand...
Click to collapse
Or he can also boot into bootloader with adb by doing adb reboot bootloader then typing fastboot erase cache
serophia said:
Or he can also boot into bootloader with adb by doing adb reboot bootloader then typing fastboot erase cache
Click to expand...
Click to collapse
This process seems to work quite well.
I'd recommend to use MFastboot. With your phone off, you can boot into fastboot by holding power and volume down for a few seconds, release and it will boot into fastboot. Connect the usb cable, and first try "fastboot erase cache". If that doesn't work by itself, repeat the process but also use "fastboot erase userdata" (THIS WILL ERASE ALL YOUR DATA!) but at least there is a chance you might get it to boot normally. It´s like a factory reset, you will have to start from scratch.
I know my answer is out of date but it might be useful for someone coming for this same solution.
Moto x Stuck in TWRP loop
pls help me guys it just goes on restarting it dose not even goes in recovery mode
Guys.. I got struck at unlocked boot loader. Flashed TWRP on 5.1 ( GB retail rom). And its not booting now and not able to flash any rom.. kindly Help...!!!
So I had a rooted Sprint 4.2.2 (not unlocked, just rooted) and I got the OTA alert.
I accidentally installed it and it failed and now when it restarts, it gets to android for about 30 secs and then does the "powering off" bit and restarts... over and over.
In that 30 secs I can get to the settings and see that the version is still 4.2.2 so it didn't take. But it almost seems like it in stuck in that mode where it thinks it is doing the upgrade.
I tried killing memory resident stuff to prevent the restart to no avail.
I cannot get into any kind of stock recovery, it just reboots to normal mode
My only option is to go into Bootloader which does work.
But when I try to use RSD Lite and flash back to that last stock image, it shows
Failed flashing process 2/17 flash partition "gpt.bin"
I read that this may be due to the phone not allowing me to downgrade to a version lower than I currently have? Also read it could be the battery needs to be charged more.
Thoughts?
Can you get to the factory reset in that thirty seconds?
Sent from my XT1056 using xda app-developers app
If you can get to boot loader, will it go into recovery? If so, try restoring a backup. Likely you will have to do THIS, and I recommend doing this, the ota, then reroot.
Edit: if it boots to ROM for 30sec, try wiping cache and dalvik, then fix permissions, then reboot.
Ok so after reading around and doing some of my own playing around, I figured out how to fix it with some ideas from this thread
First off, the moto x rooting process actually REMOVES the recovery.img file from your phone, so what seems to be happening is that the upgrade downloads and starts to install... it attempts to load the recovery to flash the image, but since it doesn't exist, it just restarts the phone. When the phone restarts, the upgrade process still thinks it needs to run the upgrade, so it powers down.. this is where it gets stuck in the loop.
The solution is actually simple. Get into Bootloader mode (Power + Vol Down) which was slightly tricky since the phone always rebooted and never actually powered down. So I had to catch it at the end of the power off cycle, before it restarted. Once I was in bootloader mode I could use the following command:
Code:
fastboot erase cache
That seems to remove the downloaded update files as the phone stopped rebooting over and over.
But now I get Mobile IP Registration Error 67 (MIP) which basically means my registration data got wiped.. not sure I understand why that would happen.. but it basically means I need my MSL and have to enter the code to reset registration which will force a wipe of all data. At least I have the opportunity to back everything up over wifi now that I've stopped the looping.
The second part of this fix I haven't tried, but based on an educated guess, to actually GET the update correctly, I would need to flash the stock recovery image back using:
Code:
fastboot flash recovery recovery.img
where the recovery.img file comes from the zip file for the moto x stock image from the sbf repo:
http://sbf.droid-developers.org/phone.php?device=0
That of course needs to be done before I call Sprint to get my MSL and perform the reset.
All in all, a minor setback overall... better than a paperweight Perhaps instead of doing the erase cache step and just flashing recovery may have saved my MIP data
---- EDIT-----
Ah, gokart2, I see you had a similar process. Cheers
Turns out the Mobile 67 error was because my friend changed her service back to her old phone.... I should add that this wasn't my phone by my friend's phone.
I factory reset my Glass today because it wouldn't connect to my phone (I switched roms so I needed to pair Glass again). After I did the reset it went into a boot loop. When it's on the "Glass is Updating" screen it can't be accessed via ADB, but I managed to figure out how to get it into the bootloader via the buttons.
From the bootloader I've tried erasing and flashing 16.2, 16.11, and 16.0 but it just returns to the same "Glass is Updating" screen when I reboot.
When I erase, I erase boot, recovery, system, userdata, and cache. When I flash, I flash boot, recovery, and system. I've tried with and without flashing userdata.
Does anyone have any ideas as to what could be wrong?
EDIT: Something really weird is going on. I ran the erase without flashing anything back on and did a reboot. I expected it to stop at the bootloader since there should be nothing to load, but instead it continues to go into the "Glass is Updating" boot loop.
EDIT 2: I've been doing a lot of reading and it sounds like there are more partitions than just the bootloader and the 5 that I have been erasing. My guess right now is that my device downloaded the 16.2 update into some other partition before I did the factory reset and now every time it boots it's running that update. I can't get much info from the device because I can't use adb.
I had the same issue when I tried flashing 16.2. I went back to XE12 and it resolved the issue. The whole point was to get away from the train wreck that is XE16.x anyway, so I'm just going to stay on 12 until the XE17 images are available - then we'll see if that release is any more stable.
davezack said:
I had the same issue when I tried flashing 16.2. I went back to XE12 and it resolved the issue. The whole point was to get away from the train wreck that is XE16.x anyway, so I'm just going to stay on 12 until the XE17 images are available - then we'll see if that release is any more stable.
Click to expand...
Click to collapse
That did it! I didn't try a version back that far because as far as I know mine had XE16 on it when I first got it.
Thanks!
Hi there,
I have a Moto G 2 (2014) that I use as a secondary phone and yesterday my phones started to act weird so I decided to reboot it, upon rebooting phone is completely unusable. There is no way to browse through apps or do anything at all as every single app crashes almost immediately. Even the system apps crash constantly.
I thought that factory reset will solve the issue but I can't access it through phone so I tried to use recovery option to reset it to the factory settings without any luck. Bootloader is unlocked with status 3, but there is no way to flash anything, custom rom or recovery. I have followed the steps to flash the recovery from HERE without any luck. Booting the recovery through fastboot gets me through to TWRP or CWM but I can't perform any operation as any wipe command results in error 5.
Erasing through fastboot doesn't do anything either, although shows that operation has succeed when I boot I am greeted with same state I left the phone in, with exact apps I left open etc.
I have even unplugged the battery and left it for few hours to drain the energy from the board without any luck!
Now I was wondering whether it is some sort of memory issue? I never had any issues with the phone it was working well until one day it just sort of died.
Short version
Phone boots - Every app crashes (even system apps)
Unlocked Bootloader
No way to flash or wipe anything
Can boot to custom recovery through fastboot but that's about it (can't perform any operation, constant Error 5)
When wiping through fastboot device still has the old data even the apps that I had open when it crashed.
Sounds like data/internal storage partition is corrupted. Can you access internal storage via mtp on PC?
Many phones were saved by flashing stock ROM, especially partition table/gpt.bin.
Try flashing whole stock ROM, step by step. You can find files and Howto here on xda.
This will reset your phone! Good luck!