Database Develop

Looking for a new case.

I currently have a body glove case and a screen protector. I'm wanting a case with the protection of the otter box defender but with a similar feel to what i have now as it's not very bulky at all. I have a at&t phone. http://www.newegg.com/Product/Product.aspx?Item=9SIA08919W5928&nm_mc=KNC-GoogleMKP&cm_mmc=KNC-GoogleMKP-_-pla-_-All+Cases+%26+Covers-_-9SIA08919W5928&ef_id=UyJb4wAABDAM6nfE:20140320220013:s oh yeah, the screen protectors i have aren't wide enough for the screen, they miss just a little bit of it on one side.

I know you like more protection for your phone but I've been super happy with a poetic slim case with no screen protector. There is a slight barely noticeable edge around the front so no problem laying case face-down on tables.
Poetic-Palette-Case-Black-Only (search amazon)
For a more protective case:
SPIGEN-Protective-Sprint-T-Mobile-International (search amazon)
About screen protectors: I used to use them on every phone but these days the glass material used is very hard to scratch and I think the protectors are redundant. But my phone is in my pocket mostly and I have only dropped a phone rarely. YMMV.

I have a commuter. Pretty awesome protection while not adding too much bulk.
Sent from the LG G2

miyagi241 said:
Try zerolemon case.
Click to expand...
Click to collapse
Are you kidding??? This is the uggliest case ever made for the G2 IMO.
If you want the protection of the otterBox without the bulk just go with the COMMUTER case by OTTERBOX

I just discovered "Nillkin Super Frosted", it's really good, excellent fit for D802 version. Really good one.

shaarky said:
I just discovered "Nillkin Super Frosted", it's really good, excellent fit for D802 version. Really good one.
Click to expand...
Click to collapse
Use a TPU Silicon Case,i think this is the best for Every Phone.

Tudia-clear skin-Poetic
I was using the relatively slim Tudia case since the first day i got the G2. After a few months, even that case was too bulky for me. So I took the case off and tried IQ Shield's full body clear protective skin. It works great against scratches but I decided to go back to a case after i dropped it on some tiles and dented the plastic corner a bit. I will try the even slimmer Poetic now.

[Q] Best minimal cases that protect screen?

Looking for a case that offers a good amount of screen protection so that the glass doesn't crack if I drop it. Anyone have any recommendations?
Sent from my XT1095 using Tapatalk

At minimum you'll want a tpu cover like a cruzerlite. It curves around the front over the curved glass edge where it's most likely to crack in a drop. Tudia and diztronic have well-reviewed covers as well.

I just bought a Hula case off amazon and I'm loving it. I have a wood back so I wanted a case that doesn't cover it since I love how it feels and looks.

I also just ordered the Hula off of Amazon. From what I can see it seems to have a good lip on the front and back, and also allows you to see the full back. I'm currently using the Supcase Unicorn Beetle Pro, and while it is a good case with much more protection, It's just too much bulk for an every day case. In my opinion, I didn't customize my phone just to cover it up with a plain case! I was looking into some of the clear tpu cases but most either cover the dimple or are missing a mic cut out on the back...

I have the Hula bumper case and somehow managed to drop my phone this morning while getting out of the car, and the screen shattered. I wouldn't count on it offering much protection for your screen...

I've seen phones in otter cases where the screen shattered upon dropping. I don't think there is any case out there that will protect against certain drops. If the phone drops and lands a certain way, it will shatter almost every time.

Best Combination of Case+Screen Film S7 Edge

Hello!
Currently I'm using
Spigen Slim Armor:
http://www.amazon.com/gp/product/B01AUR18D0?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00
IQ Shield Matte
http://www.amazon.com/gp/product/B01BG2ELRI?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00
Its working horribly, there's bubble in all corners (See photos attached). If i'm not mistaken the spigen case is pushing hard on the corners top and bottom.
Is this happening to some of you guys?
What combination of case and screen protector are you guys using so that this doesn't happens?
Thanks in Advance

I have been using the ZAGG invisible shield hd dry combined with a Supcase Unicorn Beetle Pro.
I LOVE this combo.
The screen protector went on relatively easily. did that day one. no bubbles anywhere and it's super clear. it wrapped around the sides easily with the special applicator included in the box. this is NOT a typical credit card squeegee install. I had it just like that for a few days until the case showed up.
What i like about this case is the two part sandwich effect. There is a frame that clips on the front of the phone and the whole ting then inserts into the back. sort of like the ottorbox cases. only half the price. The frame completely protects the edges of the screen protector, i don't thing there really is a way to accidentally rub on the edges of the screen protector and work it loose.
And bonus, it works in my QI wireless charger with no problems whatsoever.

I've got the IQ shield non matte and a Ringke Fusion Crystal case. It's shock simple and has dust covers.
Case > https://www.amazon.com/dp/B01A16BCMW/ref=cm_sw_r_other_awd_bTE6wb4Q9ZZK8
Sent from my SM-G935V using Tapatalk

mvpulsts said:
I have been using the ZAGG invisible shield hd dry combined with a Supcase Unicorn Beetle Pro.
I LOVE this combo.
The screen protector went on relatively easily. did that day one. no bubbles anywhere and it's super clear. it wrapped around the sides easily with the special applicator included in the box. this is NOT a typical credit card squeegee install. I had it just like that for a few days until the case showed up.
What i like about this case is the two part sandwich effect. There is a frame that clips on the front of the phone and the whole ting then inserts into the back. sort of like the ottorbox cases. only half the price. The frame completely protects the edges of the screen protector, i don't thing there really is a way to accidentally rub on the edges of the screen protector and work it loose.
And bonus, it works in my QI wireless charger with no problems whatsoever.
Click to expand...
Click to collapse
Does the zagg protector should help in case of drops? And is it as good as a tempered glass in that case?
Sent from my SM-G935F using Tapatalk

I don't know about best combo (because this is my first combo) but I have the Spigen Ultra Hybrid crystal clear and the Skinomi TechSkin on my gold platinum S7 Edge and so far so good. I just installed the Skinomi last night since I got it yesterday. My Spigen case I've had on the phone since March 5th when the case arrived. I ordered both products from Amazon.

The Skinomi I had did the same as the op, as for the Zagg HD amazon refunded my order yesterday saying something was wrong the product and they were canceling it.
Sent from my SM-G935V using Tapatalk

I got a similar case for my S7E ... Spigen Tough armor with the Armour Suit Military Shield... still awaiting my phones frm T-mobile

Zagg HD Dry front and back with Otterbox Symmetry Clear Series
My UAG case pushed the top right corner had to trim just a little. This case seems to be more screen protector friendly. Both cases are pretty much identical is size. The otterbox is much stiffer and back seems more scratch resistant, the UAG is already scratched. UAG offers a little more screen protection in the corners and the buttons are much easier to press. Pics are taken on top of the UAG case for size comparison.

Bodyguardz HD Curved with the UAG ICE, No problems with the protector peeling.

AndroiderM said:
My UAG case pushed the top right corner had to trim just a little. This case seems to be more screen protector friendly. Both cases are pretty much identical is size. The otterbox is much stiffer and back seems more scratch resistant, the UAG is already scratched. UAG offers a little more screen protection in the corners and the buttons are much easier to press. Pics are taken on top of the UAG case for size comparison.
Click to expand...
Click to collapse
Any problems with the Otterbox peeling up the sides of the protector?

felloffthetruck said:
Any problems with the Otterbox peeling up the sides of the protector?
Click to expand...
Click to collapse
Nope, everything is laying down with no signs of peeling. The zagg did stay on the phone for 3 days with no case while I was waiting for Amazon to deliver and I did blow dry the edges. I don't think this made a difference, otterbox just seems like it sits on top protector better. The case seems to lack screen protection though, the raised edge on top and bottom of screen is only about 1/16 thick. I've never broke a phone but this might be a deal breakerbreaker for some.

I don't have a way of taking taking a pic right now, but I have the Spigen Tough Armor on my GS7E with a Skinomi MatteSkin screen protector.
The Skin has may be 1-2 mm taller than optimal, I have just the slightest push from the case on the top of the skin, but that could also be my fault for not as well aligning the skin as possible. Tough call. I'll probably be putting a new skin on this week anyway just because I'm OCD about it.
addendum 2016/3/23: replaced the MatteSkin last night and put the Tough Armor back on this morning. Alignment seems good. One 'speck' maybe under the skin near the top under the Samsung logo, you'll see some squiggles there where I was working against it this morning to see if it was a bubble that could be pushed out. {shrug}
Fit between the two seems *tight* but *may* be good or great.
After putting the Tough Armor back on I got some push against the bottom left edge of the MatteSkin but a few passes with a spudger seems to have smoothed it back out. See if it stays.
The inner edge of the Tough Armor on the front top/bottom seems tight and sharp-edged where it meets the phone. If this was backed off 0.5mm-ish there would definitely be no issue.
I know some don't like how much the Tough Armor stiffens up the buttons on the sides, but that works in my favor as it cuts down on unintended activation when the phone is in a backpack or pocket, and the shape of the Armor edge makes for a nice flat stance when using the kickstand or otherwise leaning on the side.
Final word: 97% perfect fit. The case ended up pushing the bottom of the screen protector a bit, the inner most lip edges on the Tough Armor was about 1 mm too far to play nice with the MatteSkin. Trimming the edge of the case with a sharp knife though does resolve it, if you can do that with a truly even hand it probably would be a great combo, my hand isn't that perfect so I had a bit of an irregular edge. Worked well though, otherwise.

I'm currently using the IQ Shield HD Wet screen protector:
http://www.amazon.com/gp/product/B01BG2EJYS?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
With the SUPCASE Unicorn Beetle Rugged Full Body Case:
http://www.amazon.com/SUPCASE-Full-...sr=1-1&keywords=galaxy+s7+edge+unicorn+beetle
I just received the Tech21 Frame case in the mail so will be seeing if that works well with the screen protector. Unfortunately I have heard it doesn't but here's to hoping.
Update: Tech21 Frame case will indeed push up on the edges of the screen protector.

The best screen protector I have used to date is from bestskinsever and their customer service is top notch. It isn't noticble at all and the cutouts are scary accurate.
I have ordered some from xtremeguard and the cutouts are too big and I ended up tossing them. The other brand I tried was some from illumni and they scratch up real easy, the fit was better than extremeguard but not by that much and their customer service sucked.
http://www.bestskinsever.com/samsung-galaxy-s7-skin

Here's the Symmetry with the Bodyguardz HD curved.

ipaq_101 said:
The best screen protector I have used to date is from bestskinsever and their customer service is top notch. It isn't noticble at all and the cutouts are scary accurate.
I have ordered some from xtremeguard and the cutouts are too big and I ended up tossing them. The other brand I tried was some from illumni and they scratch up real easy, the fit was better than extremeguard but not by that much and their customer service sucked.
http://www.bestskinsever.com/samsung-galaxy-s7-skin
Click to expand...
Click to collapse
I just ordered the case friendly and edge to edge to see which one I like better. I agree, their screen protectors are top notch.

Zagg HD Dry + Speck Candyshell Clear
Only been on 24 hrs but it looks like a win so far. Both are seriously good quality products, but then they better be for the price.

Galaxy S7 Edge Case, Spigen® [Ultra Hybrid] AIR CUSHION [Crystal Clear] Clear back panel + TPU bumper for Samsung Galaxy S7 Edge (2016) - 556CS20034 with the hollow bumpers in the corner works well with screenknight protector.

Obliq Naked Shield Black + ArmorSuit MilitaryShield FullScreen Extreme Clarity HD
Case : Obliq Naked Shield
Screen : ArmorSuit MilitaryShield
While I like the look of the Skinomi MatteSkin on the screen I wanted to try something else, for comparison. So I got the ArmorSuit and put it on, along with the Obliq case - changing over from a more stealth to more bling kind of look, truly.
Both the case and shield are a very nice fit for the device. Not as large nor thick as the Tough Armor I had been using, time will tell whether that's good or bad.
The ArmorSuit screen protector, once on and de-bubbled basically disappears. It's only the 1st day of use but it's very much NOT there, visually.
The Obliq case is also very lean, and the back is very clear, letting the look of the silver phone I have glare out at you.
Combined they seem to work seamlessly together. I was concerned in particular because the ArmorSuit is a full coverage, and not their case-friendly version, however in this case they seem to be working well together. I truly must have gotten lucky with the screen protector install because I literally can't see the edges of it vs the edges of the Obliq case. Nice.
The Obliq is NOT as much protection as the Tough Armor, to be sure, but it is prettier and alters the ergonomics and looks of the phone dramatically less.
The Obliq DOES appear to be a "fingerprint magnet" though ... time will tell.
The ArmorSuit does NOT appear to be a fingerprint magnet, which is nice. It is very glossy/reflective though, as a couple of the pics I've attached show.

I initially had this Roya kickstand case.. plus this tempered glass protector
I've decided to give the iq shield (not the matte one) a try per some recommendations on here.. hoping sensitivity is at least "close" to having no protector (like with regular phones + tempered).. i've had iq shield in the past and its been solid though i seem to recall sensitivity taking a hit.
I'm going with the Beetle Pro Full case (not hybrid one).. i guess its harder to get off if you use gear vr.. but i saw a rumor if you cut the bumpers off near the usb on gear vr a case may fit, unsure.
I saw the Spigen with kickstand.. it looks similar to the Beetle Pro.. can anyone comment on how slippery it is, or if its got a good grip like the Beetle Pro (full) and protects the edges too (easier to get off maybe)? Spigen appears to not have edge protection, so similar to Beetle Hybrid ($11.99 vs Spigen at $17.99).. I would think the Beetle Pro Hybrid would make more sense price wise.
I guess if you get the $99 2 year accidental damage samsung warranty then the hybrid is a no brainer.

[Useful] Orzly / Ultimate Shield Tempered Glass supported CASES [Useful]

Oneplus 3 is a beautiful device and we all know to protect screen we need to apply a Tempered Glass. So my first TG for OP3 was Orzly. I know some of you dont prefer is due to dot matrix grid / rainbow affect. But for me it was not a problem. Also if you are unhappy with Orzly there is always Ultimate Shield TG which also a full screen TG. Problem with full screen TGs are most of them doesn't support cases specially hybrid cases. After buying some well known case, i've always found that they dont fit well with full screen TGs. But i've found cheap but really high quality Chinese hybrid case which fit well with full screen TGs :fingers-crossed::fingers-crossed:. So in this thread i will share which cases does support and which doesn't. You guys always welcome to post same thing to help other.. Which supports and which doesn't..
Support
Screen : Orzly Tempered Glass / Ultimate Shield Tempered Glass
Link : http://orzly.com/orzlyr-3d-pro-fit-glass-screen-protector-for-oneplus-3.html
Ultimateshield OnePlus 3 (Black) Tempered Glass Screen Protector
Link : http://www.ultimateshield.co.uk/oneplus-3-black-tempered-glass-screen-protector/
Case: Heavy Duty Armor Shield Hard Shockproof Protector Cover Case
Link : http://www.ebay.com/itm/391504331329?_trksid=p2057872.m2749.l2649&var=660669915743&ssPageName=STRK%3AMEBIDX%3AIT
Doesn't Support
Screen : Same as above
Case :
Soft TPU Silicon Matte Comfortable Protective Back Case
Link : http://www.ebay.com/itm/162115108195?_trksid=p2057872.m2749.l2649&var=461076476670&ssPageName=STRK%3AMEBIDX%3AIT
TUDIA Slim-Fit HEAVY DUTY MERGE Dual Layer Cover Case
Link : http://www.ebay.com/itm/252423838358?_trksid=p2057872.m2749.l2649&var=551276210946&ssPageName=STRK%3AMEBIDX%3AIT
Spigen®「Rugged Armor」Carbon Fiber Texutred Protective Case
Link : http://www.ebay.com/itm/252469306570?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

crazykas said:
Oneplus 3 is a beautiful device and we all know to protect screen we need to apply a Tempered Glass. So my first TG for OP3 was Orzly. I know some of you dont prefer is due to dot matrix grid / rainbow affect. But for me it was not a problem. Also if you are unhappy with Orzly there is always Ultimate Shield TG which also a full screen TG. Problem with full screen TGs are most of them doesn't support cases specially hybrid cases. After buying some well known case, i've always found that they dont fit well with full screen TGs. But i've found cheap but really high quality Chinese hybrid case which fit well with full screen TGs :fingers-crossed::fingers-crossed:. So in this thread i will share which cases does support and which doesn't. You guys always welcome to post same thing to help other.. Which supports and which doesn't..
Support
Screen : Orzly Tempered Glass / Ultimate Shield Tempered Glass
Link : http://orzly.com/orzlyr-3d-pro-fit-glass-screen-protector-for-oneplus-3.html
Ultimateshield OnePlus 3 (Black) Tempered Glass Screen Protector
Link : http://www.ultimateshield.co.uk/oneplus-3-black-tempered-glass-screen-protector/
Case: Heavy Duty Armor Shield Hard Shockproof Protector Cover Case
Link : http://www.ebay.com/itm/391504331329?_trksid=p2057872.m2749.l2649&var=660669915743&ssPageName=STRK%3AMEBIDX%3AIT
Doesn't Support
Screen : Same as above
Case :
Soft TPU Silicon Matte Comfortable Protective Back Case
Link : http://www.ebay.com/itm/162115108195?_trksid=p2057872.m2749.l2649&var=461076476670&ssPageName=STRK%3AMEBIDX%3AIT
TUDIA Slim-Fit HEAVY DUTY MERGE Dual Layer Cover Case
Link : http://www.ebay.com/itm/252423838358?_trksid=p2057872.m2749.l2649&var=551276210946&ssPageName=STRK%3AMEBIDX%3AIT
Spigen®「Rugged Armor」Carbon Fiber Texutred Protective Case
Link : http://www.ebay.com/itm/252469306570?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Click to expand...
Click to collapse
Orzly Tempered Glass + Heavy Duty Armor Shield Hard Shockproof Protector Cover Case : really great protection. Thanks for this really useful post, I avoided unnecessary purchases thanks to you !

Orzly TGSP works fine with Tudia Merge case.
I am using it for a month now, no problems.

berbecverde said:
Orzly TGSP works fine with Tudia Merge case.
I am using it for a month now, no problems.
Click to expand...
Click to collapse
No buddy it doesn't fit well in all corner..Thatz the problem

Yes buddy it does fit. I guess you just have to know hot to put your case on.
Take a look.
Everything is fine at the corners. The case is over the glass on every corner.
Edit:
Not trying to start a fight or anything, just maybe some people want to buy this case and by reading your post they will avoid
the Tudia Merge case, a good case by the way, with lots of colors to cheer you up.
And i have to mention that once you know how to, you can take it off and put it back in under one minute.

I'm with crazykas on this one. I thought i had my merge over the tg but with a lot of in and out of pockets it finally popped off.
Sent from my ONEPLUS A3000 using Tapatalk

annoyingly orzly flexi case + orzly tgsp = a load of crap, the case pops the screen of,f how did they not take into account the two products being used together, very disappointing.

Just bought orzly tgs and orzly bumper case. Not 100% compatible but if you pay a lot of attention you can manage to put the cover over the glass. Have particular attention to the corner.
I will test it in the next days..
Orzly® - OnePlus 3 - Fusion Bumper Cover per Oneplus 3 / OnePlus THREE ( 2016 ) - Cover con Tecnologia di Assorbimento Urto - NERA https://www.amazon.it/dp/B01HBLS85Y/ref=cm_sw_r_cp_apa_DucXxbSS4EB8N

I really like the Spigen Rugged Armorr Case - https://www.amazon.com/gp/product/B01H3PEWDK/ref=ox_sc_act_title_3?ie=UTF8&psc=1&smid=A2SFKRF5TPZMT5
But i'm worried the tempered glass i want to get won't go well with it. The Yootech one. - https://www.amazon.com/gp/product/B01KC1TFKC/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A3KGQHS00G2MDY
Should i just go for a regular screen protector since the case already has some leap in front. Like the ArmorSuit one - https://www.amazon.com/gp/product/B01H85Q8V4/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A3LQSX85N730QN
Need to order them soon too. Replies would be appreciated.

I think that for example if want to use the orzly grip or the tudia merge case, one other solution would be using a TGSP that does not cover the entire screen, like the first Nilkkin TGSP.So were the case ends the Screen protector will begin.
Just a theory.

stanley08 said:
I really like the Spigen Rugged Armorr Case - https://www.amazon.com/gp/product/B01H3PEWDK/ref=ox_sc_act_title_3?ie=UTF8&psc=1&smid=A2SFKRF5TPZMT5
But i'm worried the tempered glass i want to get won't go well with it. The Yootech one. - https://www.amazon.com/gp/product/B01KC1TFKC/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A3KGQHS00G2MDY
Should i just go for a regular screen protector since the case already has some leap in front. Like the ArmorSuit one - https://www.amazon.com/gp/product/B01H85Q8V4/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A3LQSX85N730QN
Need to order them soon too. Replies would be appreciated.
Click to expand...
Click to collapse
I tried the Pleson TGSP, it was craaaaap. Didn't fully adhere to the screen at the top-left corner, I could feel the little gap between it and the screen when I touched it. Just as bad, it partially blocked the front-facing camera....I haven't seen a well-reviewed TGSP for the OP3 yet, at least none that didn't seem like they weren't bought from the company selling the protectors "in exchange for an unbiased review"
I went with the IQ Shield, and while I don't know that it would fare as well as tempered glass in something like a fall or direct impact to the screen, it's plenty scratch resistant for my needs (I keep it in my front pocket), goes on very easily, doesn't feel like it's going to come off unless I really try/want it to, and fits great with the Spigen Rugged Armor case I've got. The IQ Shield and the ArmorSuit look a lot a like in terms of the design and what they're intended for (scratch resistance vs. shatter resistance you'd find with a TGSP.)
Regarding the case, I've got both the Rugged Armor and the Neo Hybrid, and I like the Neo Hybrid just a little bit better. It feels a tiny bit more durable than the Rugged Armor, I think owing to the plastic bumper around the edge of the phone/case. It's not the Slim Armor that I had with my Nexus 5 in terms of rigidity, but either one should do you just fine if you like Spigen products. I'll probably end up switching back and forth periodically between the two, anyway.

Joshmccullough said:
I tried the Pleson TGSP, it was craaaaap. Didn't fully adhere to the screen at the top-left corner, I could feel the little gap between it and the screen when I touched it. Just as bad, it partially blocked the front-facing camera....I haven't seen a well-reviewed TGSP for the OP3 yet, at least none that didn't seem like they weren't bought from the company selling the protectors "in exchange for an unbiased review"
I went with the IQ Shield, and while I don't know that it would fare as well as tempered glass in something like a fall or direct impact to the screen, it's plenty scratch resistant for my needs (I keep it in my front pocket), goes on very easily, doesn't feel like it's going to come off unless I really try/want it to, and fits great with the Spigen Rugged Armor case I've got.
Click to expand...
Click to collapse
Wow. Thanks alot for this man. I'll send you a PM and see if i can get some pictures from you. I need to order in the next 1 or 2 hours to have it delivered quickly with Amazon Prime.
This one? - https://www.amazon.com/OnePlus-Prot...472498142&sr=8-1&keywords=IQ+Shield+oneplus+3
I think if not getting a TG, it makes more sense to get the Neo Hybrid instead of the Rugged Armor?

Is there a cover full transparent supported by the orzly tempered glass?

Spigen Rugged Armor Case

Fist off i tried a Cruzerlite case and not only was it a slightly baggy fit there was no camera protection at all, a shame really as the Bugdroid cases they used to make were brilliant. As this was being returned the Spigen case became available and it is far superior.
The Spigen Rugged Armor is an excellent fit, it feels at one with the phone if that makes sense and all the cut-outs are perfect and the camera module sits around 1mm below the surface of the case to offer it some protection, overall an excellent case that i would recommend to anyone without hesitation.

MrBelter said:
Fist off i tried a Cruzerlite case and not only was it a slightly baggy fit there was no camera protection at all, a shame really as the Bugdroid cases they used to make were brilliant. As this was being returned the Spigen case became available and it is far superior.
The Spigen Rugged Armor is an excellent fit, it feels at one with the phone if that makes sense and all the cut-outs are perfect and the camera module sits around 1mm below the surface of the case to offer it some protection, overall an excellent case that i would recommend to anyone without hesitation.
Click to expand...
Click to collapse
Any options for a belt clip holster?
Also what are your thoughts on some of the other Spigen cases for this phone

Sorry i have only used this Spigen case in particular but i cant praise it enough really, the fit is exceptional. The UK price for it was £9.99 and it was worth every penny really.
I forgot a link to it in the first post.
https://www.spigen.com/collections/...7t-case-rugged-armor-1?variant=30366585094191

It's a decent case but do wish the back (bottom) was a bit thicker to provide a greater recess for the camera circle. At $11 on amazon it's a bit pricey, but spigen materials and fitment is top notch. 4/5 stars.

I have always been using Spigen case with my OP2 and OP5T. Their cases are perfect. This time I went with OtterBox clear case as I wanted to see the blue back. Perfect fit.

Anyone know if it is compatible with Original Oneplus 7T 3D Tempered Glass Screen Protector?
Or any of the Spigen cases are?