Hi guys i have a little question why after install 2nd bootloader and twrp i try to install CM11 or other rom but the kindle stay on blue logo and don't go??
Bad download?
I have resolve the problem was the bootloader file
Related
I have a Kindle Fire HD 1st Gen and I've been trying all day just to get rid of TWRP and get back to stock Amazon ROM. I tried flashing TWRP 2.2.2.1 zip, but apparently anything I flash there's an error and says couldn't find /sdcard/kindleupdate/whatever. I've downloaded KFU 0.9.6 and I have Java and SDK/ADB installed. When I try and install the drivers I get an error with an "X" next to Google (WinUSB). When I hit run.bat it says I'm online, but the device is unknown. My device won't go into fastboot anymore, it will just say on the prompt "kindle fire has been told to boot in fastboot mode" and then after that the kindle reboots and I get stuck with the light blue twrp "kindle fire hd" boot logo. I heard that TWRP 2.6.0.0 sucks because it won't flash the Amazon stock rom and that TWRP 2.2.2.1 can flash the stock rom. So I started searching on how to downgrade from TWRP 2.6.0.0 to 2.2.2.1, but everything involves kindle fire utility and root and all this other stuff that doesn't seem to work. I'm just really frustrated and fed up at this point. Why is it so difficult to get Kindle Fire Utility to install my drivers correctly and get into fastboot?
My main objective is to remove TWRP and just get back to Amazon stock OS so I can sell the darn thing.
Yes, I've searched on youtube and on xda on how to fix the driver issues/fastboot all day, but nothing has worked.
I'd really appreciate it if someone could give me some detailed steps on how to fix all of this. I wish I hadn't installed TWRP at all if I'd known it was this difficult to flash a rom.
jacobjapan said:
I have a Kindle Fire HD 1st Gen and I've been trying all day just to get rid of TWRP and get back to stock Amazon ROM. I tried flashing TWRP 2.2.2.1 zip, but apparently anything I flash there's an error and says couldn't find /sdcard/kindleupdate/whatever. I've downloaded KFU 0.9.6 and I have Java and SDK/ADB installed. When I try and install the drivers I get an error with an "X" next to Google (WinUSB). When I hit run.bat it says I'm online, but the device is unknown. My device won't go into fastboot anymore, it will just say on the prompt "kindle fire has been told to boot in fastboot mode" and then after that the kindle reboots and I get stuck with the light blue twrp "kindle fire hd" boot logo. I heard that TWRP 2.6.0.0 sucks because it won't flash the Amazon stock rom and that TWRP 2.2.2.1 can flash the stock rom. So I started searching on how to downgrade from TWRP 2.6.0.0 to 2.2.2.1, but everything involves kindle fire utility and root and all this other stuff that doesn't seem to work. I'm just really frustrated and fed up at this point. Why is it so difficult to get Kindle Fire Utility to install my drivers correctly and get into fastboot?
My main objective is to remove TWRP and just get back to Amazon stock OS so I can sell the darn thing.
Yes, I've searched on youtube and on xda on how to fix the driver issues/fastboot all day, but nothing has worked.
I'd really appreciate it if someone could give me some detailed steps on how to fix all of this. I wish I hadn't installed TWRP at all if I'd known it was this difficult to flash a rom.
Click to expand...
Click to collapse
HD and 1st gen are different devices, which do you have?
Sent from my DROIDX using Tapatalk
jacobjapan said:
I have a Kindle Fire HD 1st Gen and I've been trying all day just to get rid of TWRP and get back to stock Amazon ROM. I tried flashing TWRP 2.2.2.1 zip, but apparently anything I flash there's an error and says couldn't find /sdcard/kindleupdate/whatever. I've downloaded KFU 0.9.6 and I have Java and SDK/ADB installed. When I try and install the drivers I get an error with an "X" next to Google (WinUSB). When I hit run.bat it says I'm online, but the device is unknown. My device won't go into fastboot anymore, it will just say on the prompt "kindle fire has been told to boot in fastboot mode" and then after that the kindle reboots and I get stuck with the light blue twrp "kindle fire hd" boot logo. I heard that TWRP 2.6.0.0 sucks because it won't flash the Amazon stock rom and that TWRP 2.2.2.1 can flash the stock rom. So I started searching on how to downgrade from TWRP 2.6.0.0 to 2.2.2.1, but everything involves kindle fire utility and root and all this other stuff that doesn't seem to work. I'm just really frustrated and fed up at this point. Why is it so difficult to get Kindle Fire Utility to install my drivers correctly and get into fastboot?
My main objective is to remove TWRP and just get back to Amazon stock OS so I can sell the darn thing.
Yes, I've searched on youtube and on xda on how to fix the driver issues/fastboot all day, but nothing has worked.
I'd really appreciate it if someone could give me some detailed steps on how to fix all of this. I wish I hadn't installed TWRP at all if I'd known it was this difficult to flash a rom.
Click to expand...
Click to collapse
What firmware are you running? This matters because in order to get rid of TWRP, you will have to flash an Amazon image via fastboot to get rid of the second bootloader. This will put you back to stock. Knowing your firmware is imperative or you can flash yourself into a hard brick.
I recently bought a Kindle Fire HD 7". I have successfully rooted and installed TWRP on the device. I installed CM without any error. I later on installed another rom, which was corrupt, and now my Kindle is stuck in a bootloop. Cannot boot into recovery and cannot buy a factory cable. Is there another way to unbrick my tablet? Thank you!
Hey guys,
I rooted my Kindle Fire HD 7" (Tate) and installed a second boot loader and TWRP recovery. I installed CM11 but actually preferred the Amazon Fire OS. I tried to restore my backup from TWRP recovery, but I think it restored the boot partition badly. It now just flashes the Orange kindle fire logo, then reboots and does the same thing again and reboots etc. etc. Is there a way I can restore a Stock Fire Os Rom from my PC now or get into fastboot and re flash the boot loader (The files are in the downloads folder)
Thanks!
Could someone please suggest something? Even telling me it's unfixable and I've got a perma-brick would be helpful. Thanks!
trimfrim20 said:
Hey guys,
I rooted my Kindle Fire HD 7" (Tate) and installed a second boot loader and TWRP recovery. I installed CM11 but actually preferred the Amazon Fire OS. I tried to restore my backup from TWRP recovery, but I think it restored the boot partition badly. It now just flashes the Orange kindle fire logo, then reboots and does the same thing again and reboots etc. etc. Is there a way I can restore a Stock Fire Os Rom from my PC now or get into fastboot and re flash the boot loader (The files are in the downloads folder)
Thanks!
Click to expand...
Click to collapse
Don't worry,it's fixable. Though you'll need a fastboot cable. Then you can restore it. And I recommend using CM since Amazon OS makes problems with the 2nd boot loader.
SafinWasi said:
Don't worry,it's fixable. Though you'll need a fastboot cable. Then you can restore it. And I recommend using CM since Amazon OS makes problems with the 2nd boot loader.
Click to expand...
Click to collapse
Thanks for this SafinWasi, do you know where I could get a FastBoot cable??? (I live in the UK) I know how to use FastBoot as I've had to use it before when I flashed the wrong recovery image
Just purchase a fastboot cable via eBay and use kfft restore tool
I have a Kindle Fire HD 7" (X43Z60) that is stuck on the static boot logo. I have reflashed the system, recovery, and boot partitions using SRT v1.3.5 (system version 7.3.0), which seemed to work fine, but there was no change and the Kindle is still stuck on the static boot logo. I want to try reflashing the bootloader but I don't have a copy of it. Can someone tell me where I can get a bootloader for this model?
Another question. Does the bootloader version have to be the same as the system, or could I just extract a copy of it from update-kindle-7.5.1_user_5156420.bin which I have a copy of?
Hi,
I recently downgraded and rooted my 4th Gen Fire HD 7.
Then I tried to install Xposed, but it soft bricked my fire , which at first was stuck at the "Fire" boot logo.
So I tried to factory reset, wipe cache, but it was still stuck there.
Upon seeing this, since I still had access to TWRP, I tried to flash the 4.5.3 firmware after a factory reset.
But this got things worse (maybe), now my tablet is stuck in a bootloop at the amazon logo. At least I still have access to TWRP when I force shutdown the put on the tablet.
#Edit : I'll like to keep 4.5.3 Firmware at first before flashing 5.2 later. So since i'm trying to flash the 4.5.3 stock firmware via TWRP but it won't do that, both in sideload and in ZIP install. In sideload I get ann error like "This ROM is for ''Full ariel'' but your device is an ''omni ariel''...
I think flashing the 5.2 firmware can be done but I'll prefer someone should let me know if it will not get things worse than they are...
Idea on how to help about the issue in my edit?
Or any general solution to the problem?
Thx for reading
It will work but you need to replace twrp with stock recovery on 5.2. Here is the guide http://forum.xda-developers.com/fire-hd/general/how-to-upgrade-to-lollipop-root-gapps-t3163950
The Wizus said:
I recently downgraded and rooted my 4th Gen Fire HD 7.
Click to expand...
Click to collapse
Wrong forum.
This forum is only for the $50 ($35 on Black Friday) 7" Fire 2015 (5th gen) / KFFOWI Ford.