I'm an android ROM newbie, but an old computer geek from way back in the 80's, so I do have some kind of understanding. I own an ATT Note 3.
I've experienced only minor problems with the two main ROM flash tools, that is, Safestrap 3.x and Odin 3.x but that's probably my fault and they don't crash. But Safestrap? Oy vay! That works also, but in the final boot, black screen thereafter, after booting from ANY slot, whether it be stock slot of other slots. Thank God for the backup function and Odin.
But I digress. Right in the beginning of my flashing Odyssey, everything worked fine! Flashed Alliance ROM no problem, as well as Dynamic Kat.
Oh yeah. Confused about all those two letter abbreviations, there's no abbreviation key here on the forums?
I tried the other ROMS in the Note 3 Rom sections and stuck wit that, but then, under Safestrap, the machine would reboot to black screen! No matter what I did, wiping, rooting (of course), re-installing different versions of SafeStrap, from early 3.x versions to 3.75, nothing! Odin gets my machine back to it's (I THINK) original state.
Badly confused. Knox is fine at 0x0. Don't know how to move forward. I would like to continue to try different ROMS but the same thing keeps on happening. Hope someone can help me. If anyone wants some kind of log output, I can do that (just tell me how and where).
Thanks
David Sanborn said:
I'm an android ROM newbie, but an old computer geek from way back in the 80's, so I do have some kind of understanding. I own an ATT Note 3.
I've experienced only minor problems with the two main ROM flash tools, that is, Safestrap 3.x and Odin 3.x but that's probably my fault and they don't crash. But Safestrap? Oy vay! That works also, but in the final boot, black screen thereafter, after booting from ANY slot, whether it be stock slot of other slots. Thank God for the backup function and Odin.
But I digress. Right in the beginning of my flashing Odyssey, everything worked fine! Flashed Alliance ROM no problem, as well as Dynamic Kat.
I tried the other ROMS in the Note 3 Rom sections and stuck wit that, but then, under Safestrap, the machine would reboot to black screen! No matter what I did, wiping, rooting (of course), re-installing different versions of SafeStrap, from early 3.x versions to 3.75, nothing! Odin gets my machine back to it's (I THINK) original state.
Badly confused. Knox is fine at 0x0. Don't know how to move forward. I would like to continue to try different ROMS but the same thing keeps on happening. Hope someone can help me. If anyone wants some kind of log output, I can do that (just tell me how and where).
Thanks
Click to expand...
Click to collapse
Sounds like maybe your flashing kit kat over jellybean or the other way around. Make sure if you have going to different android versions you flash the right Odin files each time. And install the right right version of safe strape. Or you get black screens
David Sanborn said:
I'm an android ROM newbie, but an old computer geek from way back in the 80's, so I do have some kind of understanding. I own an ATT Note 3.
I've experienced only minor problems with the two main ROM flash tools, that is, Safestrap 3.x and Odin 3.x but that's probably my fault and they don't crash. But Safestrap? Oy vay! That works also, but in the final boot, black screen thereafter, after booting from ANY slot, whether it be stock slot of other slots. Thank God for the backup function and Odin.
But I digress. Right in the beginning of my flashing Odyssey, everything worked fine! Flashed Alliance ROM no problem, as well as Dynamic Kat.
Oh yeah. Confused about all those two letter abbreviations, there's no abbreviation key here on the forums?
I tried the other ROMS in the Note 3 Rom sections and stuck wit that, but then, under Safestrap, the machine would reboot to black screen! No matter what I did, wiping, rooting (of course), re-installing different versions of SafeStrap, from early 3.x versions to 3.75, nothing! Odin gets my machine back to it's (I THINK) original state.
Badly confused. Knox is fine at 0x0. Don't know how to move forward. I would like to continue to try different ROMS but the same thing keeps on happening. Hope someone can help me. If anyone wants some kind of log output, I can do that (just tell me how and where).
Thanks
Click to expand...
Click to collapse
We have two versions of safestrap and each one works with a different OS.
1.Safestrap 3.71: that works ONLY with jellybean roms. Use it (If your phone says "4.3 MI9, MJ5, or NB4" in your "about phone" in settings) to flash any jellybean rom. Read the title of any rom you're attempting to flash. If it says "4.4.2 KK or Kitkat or NC2" then stay away.
2. Safestrap 3.72/3.75 ([emoji118] this is recommended) that works ONLY with Kitkat roms. Use it (If your phone says "4.4.2 NC2" in your "about phone" in settings) to flash any Kitkat/NC2 rom. Read the title of any rom you're attempting to flash. If it says "4.3 jellybean or JB" then stay away.
K-alz said:
We have two versions of safestrap and each one works with a different OS.
1.Safestrap 3.71: that works ONLY with jellybean roms. Use it (If your phone says "4.3 MI9, MJ5, or NB4" in your "about phone" in settings) to flash any jellybean rom. Read the title of any rom you're attempting to flash. If it says "4.4.2 KK or Kitkat or NC2" then stay away.
2. Safestrap 3.72/3.75 ([emoji118] this is recommended) that works ONLY with Kitkat roms. Use it (If your phone says "4.4.2 NC2" in your "about phone" in settings) to flash any Kitkat/NC2 rom. Read the title of any rom you're attempting to flash. If it says "4.3 jellybean or JB" then stay away.
Click to expand...
Click to collapse
basicaly what he said.. and since you said you did dynamic kat and alliance.. sounds like you are on the nc2 with Kitkat..
So, best bet is going to be make sure you have ss 3.75 and only flash the kitkat roms.. Dynamic kat, Alliance, Tweaked, Firekat, and you should be fine.. just dont try and flash any that are JB
From my Fired-up Note Pro 12.2!
Thank you. A combo of Android version AND baseband at the end?
Are the version numbers I'm looking for, a combination of the Android version (4.4.2) and the end of the Baseband number (NC2)
Basically I tried everything and your suggestions should very very suspiciously like everything I've done But.. I will give it one more shot.
Any possibility of SafeStrap 3.72 would work as opposed to 3.75 not working?
warfenix said:
Sounds like maybe your flashing kit kat over jellybean or the other way around. Make sure if you have going to different android versions you flash the right Odin files each time. And install the right right version of safe strape. Or you get black screens
Click to expand...
Click to collapse
---------- Post added at 10:51 PM ---------- Previous post was at 10:35 PM ----------
Version 4.42. I'll give everything a shot here although, I've tried all of this but maybe I've missed something. Thank you for responding.
warfenix said:
Sounds like maybe your flashing kit kat over jellybean or the other way around. Make sure if you have going to different android versions you flash the right Odin files each time. And install the right right version of safe strape. Or you get black screens
Click to expand...
Click to collapse
bodycode said:
Are the version numbers I'm looking for, a combination of the Android version (4.4.2) and the end of the Baseband number (NC2)
Basically I tried everything and your suggestions should very very suspiciously like everything I've done But.. I will give it one more shot.
Any possibility of SafeStrap 3.72 would work as opposed to 3.75 not working?
---------- Post added at 10:51 PM ---------- Previous post was at 10:35 PM ----------
Version 4.42. I'll give everything a shot here although, I've tried all of this but maybe I've missed something. Thank you for responding.
Click to expand...
Click to collapse
yeah if you are seeing 4.4.2 and nc2 you are on KK.. just make sure you are on 3.75 and all should be ok with flashing..
if for some reason it is borked,, go down to carls thread for odin files and how to odin back to stock nc2 and then start over and you should be fine
From my Fired-up Note Pro 12.2!
NO good. 3.75/stock slot/Alliance ROM fails.
Same ****. Black screen.
David Sanborn said:
I'm an android ROM newbie, but an old computer geek from way back in the 80's, so I do have some kind of understanding. I own an ATT Note 3.
I've experienced only minor problems with the two main ROM flash tools, that is, Safestrap 3.x and Odin 3.x but that's probably my fault and they don't crash. But Safestrap? Oy vay! That works also, but in the final boot, black screen thereafter, after booting from ANY slot, whether it be stock slot of other slots. Thank God for the backup function and Odin.
But I digress. Right in the beginning of my flashing Odyssey, everything worked fine! Flashed Alliance ROM no problem, as well as Dynamic Kat.
Oh yeah. Confused about all those two letter abbreviations, there's no abbreviation key here on the forums?
I tried the other ROMS in the Note 3 Rom sections and stuck wit that, but then, under Safestrap, the machine would reboot to black screen! No matter what I did, wiping, rooting (of course), re-installing different versions of SafeStrap, from early 3.x versions to 3.75, nothing! Odin gets my machine back to it's (I THINK) original state.
Badly confused. Knox is fine at 0x0. Don't know how to move forward. I would like to continue to try different ROMS but the same thing keeps on happening. Hope someone can help me. If anyone wants some kind of log output, I can do that (just tell me how and where).
Thanks
Click to expand...
Click to collapse
NO good. 3.75 fails!
3.75 and Alliance utterly fails into black screen. Safestrap reboot screen does this, but the other button (restore) gets me back to all the other buttons. Stock slot has size of zero partition size after alliance installation.
warfenix said:
Sounds like maybe your flashing kit kat over jellybean or the other way around. Make sure if you have going to different android versions you flash the right Odin files each time. And install the right right version of safe strape. Or you get black screens
Click to expand...
Click to collapse
AFter creating another slot and wipe, system mounting errors.
System mount errors all over the place after creating another slot, and installing Alliance. What's going on here? Something's really screwed up.
e: unable to mount '/system'
e: unable to mount '/systemorig'
over and over again
Can't check permissions after FActory reset. Please boot rom and try again after you reboot into recovery.
David Sanborn said:
3.75 and Alliance utterly fails into black screen. Safestrap reboot screen does this, but the other button (restore) gets me back to all the other buttons. Stock slot has size of zero partition size after alliance installation.
Click to expand...
Click to collapse
David Sanborn said:
3.75 and Alliance utterly fails into black screen. Safestrap reboot screen does this, but the other button (restore) gets me back to all the other buttons. Stock slot has size of zero partition size after alliance installation.
Click to expand...
Click to collapse
I would simply restore back to mj5 and start over. I did this last night simply to reset my phone cause I flash way to much lol. I would give that a try though. Thread is in the general section
How to restore to Mj5?
How do I downgrade to Mj5 from KK4.2?
Thanks
warfenix said:
I would simply restore back to mj5 and start over. I did this last night simply to reset my phone cause I flash way to much lol. I would give that a try though. Thread is in the general section
Click to expand...
Click to collapse
David Sanborn said:
How do I downgrade to Mj5 from KK4.2?
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2559715
I know what your problem is brother. This same crap happened to me. To a T! For some reason when u wipe system in safesteap, it wipes everything out. EVERYTHING. except data. I learned the hard way,like u. So when u flash roms, don't wipe system, only factory reset. I wipe it 3× every time. Then install your Rom. You will b fine. I haven't had one problem ever since I stopped wiping system. And no random reboots or anything, Roms now flash, and boot as they should. Hope this helps.
David Sanborn said:
How do I downgrade to Mj5 from KK4.2?
Thanks
Click to expand...
Click to collapse
Dude. If you're on NC2 then don't ever do the MJ5. It'll give the same problem. Just Odin the first four files from this thread http://forum.xda-developers.com/showthread.php?t=2838117 then root with towelroot/install busybox (make sure to install it from within the app as well) then install ss 3.72 or 3.75 then start flashing Kitkat roms.
K-alz said:
Dude. If you're on NC2 then don't ever do the MJ5. It'll give the same problem. Just Odin the first four files from this thread http://forum.xda-developers.com/showthread.php?t=2838117 then root with towelroot/install busybox (make sure to install it from within the app as well) then install ss 3.72 or 3.75 then start flashing Kitkat roms.
Click to expand...
Click to collapse
True but I think his problem is wiping system when he installs roms. If he's still not able to boot up right then ya he needs to use Odin and those files to get up and running again.
I just wish it was like the note 2. With unlocked bootloader and real twrp recovery.
zounduser said:
True but I think his problem is wiping system when he installs roms. If he's still not able to boot up right then ya he needs to use Odin and those files to get up and running again.
I just wish it was like the note 2. With unlocked bootloader and real twrp recovery.
Click to expand...
Click to collapse
These four files are as easy as it gets. Literally, put phone into download mode, load files to their respective slots then hit start. That's all. Saves you much bullshiz
K-alz said:
These four files are as easy as it gets. Literally, put phone into download mode, load files to their respective slots then hit start. That's all. Saves you much bullshiz
Click to expand...
Click to collapse
Oh I agree. I've had to do it. I'm saying going forward so it doesn't happen again.
4 files in odin flash, done that 15 times.
I've flashed Odin stock COUNTLESS times! When I go back to flash kitkat ROMS, same **** all over again. Unbelievable. I'm at my wits end. My phone DOES boot with the Odin files. But when flashing anything else with safestrap, black screen again.
K-alz said:
These four files are as easy as it gets. Literally, put phone into download mode, load files to their respective slots then hit start. That's all. Saves you much bullshiz
Click to expand...
Click to collapse
David Sanborn said:
I've flashed Odin stock COUNTLESS times! When I go back to flash kitkat ROMS, same **** all over again. Unbelievable. I'm at my wits end. My phone DOES boot with the Odin files. But when flashing anything else with safestrap, black screen again.
Click to expand...
Click to collapse
You used the files in the thread I gave you a couple of posts back and it didn't work? Man I hope you still have your warranty. Just flash back to stock and take your phone to the AT&T warranty center and make up and issue with your phone and tell them that you can't deal with your phone anymore and get you a new phone. They believe about anything. If that didn't work then head to bestbuy if there is one by you and ask them to reflash the system for you (that's of course after you flash back to stock).
Not a block screen on Odin and no trips.
Did I mention Odin works fine? Knox is not tripped. All is well right after Odin upload to phone in Download mode. It's only when I flash anything that blackscreen curses me again. heh heh.
K-alz said:
You used the files in the thread I gave you a couple of posts back and it didn't work? Man I hope you still have your warranty. Just flash back to stock and take your phone to the AT&T warranty center and make up and issue with your phone and tell them that you can't deal with your phone anymore and get you a new phone. They believe about anything. If that didn't work then head to bestbuy if there is one by you and ask them to reflash the system for you (that's of course after you flash back to stock).
Click to expand...
Click to collapse
Related
HELP! I am so scared...somebody help me!
I tried to installed the Overcome kernel but didn't like it, as each time I boot up, that voice comes up.
And plus, a few of my original apps was lost (including Market). So I thought i'd install with Odin again the:
CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar
And now, when i switch on the tablet, it'll boot with the animation and sound, but then a blank screen.
I can manage to boot into ClockworkMod recovery. Can i be saved? Please somebody help me!
Thanks
geoyakult said:
HELP! I am so scared...somebody help me!
I tried to installed the Overcome kernel but didn't like it, as each time I boot up, that voice comes up.
And plus, a few of my original apps was lost (including Market). So I thought i'd install with Odin again the:
CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar
And now, when i switch on the tablet, it'll boot with the animation and sound, but then a blank screen.
I can manage to boot into ClockworkMod recovery. Can i be saved? Please somebody help me!
Thanks
Click to expand...
Click to collapse
If you can boot into CWM, then you should easily be able to get into Download mode as well. You can go back to the stock image for your Tab, or try and reflash a different rom via CWM... sounds like just a bad flash for a soft brick..
pvtjoker42 said:
If you can boot into CWM, then you should easily be able to get into Download mode as well. You can go back to the stock image for your Tab, or try and reflash a different rom via CWM... sounds like just a bad flash for a soft brick..
Click to expand...
Click to collapse
Hi there, thanks for reply back to me.
I've managed to actually get it going again, by reflashing to the Overcome kernel.
However, some apps has disappeared and also the market.
Anyways, i wish to revert the whole thing back to stock, kernel and firmware. Is there a way I can do this via Kies?
Let me know what information regarding my tab you need. I believe it is the CPW (GSM) UK version.
cheers
geoyakult said:
HELP! I am so scared...somebody help me!
I tried to installed the Overcome kernel but didn't like it, as each time I boot up, that voice comes up.
And plus, a few of my original apps was lost (including Market). So I thought i'd install with Odin again the:
CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar
And now, when i switch on the tablet, it'll boot with the animation and sound, but then a blank screen.
I can manage to boot into ClockworkMod recovery. Can i be saved? Please somebody help me!
Thanks
Click to expand...
Click to collapse
LOL. FYI, your Tab is not haunted. That voice that you refer to, is basically an indicator that the file-system on the Tab is being converted from RFS to EXT4 (what some would affectionately refer to as the lag-fix). You should have left it to continue. That's the reason we ask people to let it finish booting before doing anything else. As always, when it comes to flashing a new firmware/kernel, it's always better to read up and know what to expect.
Anyway, by the looks of it, you might have a corrupted file-system, since you keep shutting it down mid-conversion. That's the reason "the voice" keeps coming back. If you'd allowed it to complete, it should not have returned.
Secondly, flashing the Overcome Kernel alone will NOT remove the Market application. If you were already on the CF-Root kernel, it might remove the CF-Root specific applications like the CwM "app" (and not the recovery functionality, mind you...) and the Tweaks app as these apps were created by ChainFire specifically for his kernel.
Best advice would be to re-flash a stock firmware first, to get your Tab into a clean system. From there, you can continue to to install the kernel of your choice (like ChainFire or Kouxudaxi's fine kernels as well.... these kernels, if I'm not mistaken, do not do automatic EXT4 conversions)
If you're unsure of how to do this, refer to the guide in teamovercome.net and it'll guide you in basic re-stocking (but using our Stock safe package which will provide you with the Gingerbread-based JQ1 firmware).
LOL, +100000000000000000000000 thepitbull...
thepittbull said:
LOL. FYI, your Tab is not haunted. That voice that you refer to, is basically an indicator that the file-system on the Tab is being converted from RFS to EXT4 (what some would affectionately refer to as the lag-fix). You should have left it to continue. That's the reason we ask people to let it finish booting before doing anything else. As always, when it comes to flashing a new firmware/kernel, it's always better to read up and know what to expect.
Anyway, by the looks of it, you might have a corrupted file-system, since you keep shutting it down mid-conversion. That's the reason "the voice" keeps coming back. If you'd allowed it to complete, it should not have returned.
Secondly, flashing the Overcome Kernel alone will NOT remove the Market application. If you were already on the CF-Root kernel, it might remove the CF-Root specific applications like the CwM "app" (and not the recovery functionality, mind you...) and the Tweaks app as these apps were created by ChainFire specifically for his kernel.
Best advice would be to re-flash a stock firmware first, to get your Tab into a clean system. From there, you can continue to to install the kernel of your choice (like ChainFire or Kouxudaxi's fine kernels as well.... these kernels, if I'm not mistaken, do not do automatic EXT4 conversions)
If you're unsure of how to do this, refer to the guide in teamovercome.net and it'll guide you in basic re-stocking (but using our Stock safe package which will provide you with the Gingerbread-based JQ1 firmware).
Click to expand...
Click to collapse
Hi there,
Thank you so much for your time in replying - I've managed to install what i believe is stock Gingerbread from Samsfirmware. So everything looks back to normal... tho i have posted another Question, with all my firmware details so I can be reassured I am back to stock.
So sorry, I panicked so badly last night..ha!
You have also special thread with many scenarios how to fix your tablet if anything goes wrong.
It helped me yesterday to revive my Galaxy Tab. Just suddenly it started freezing and restarting, after 3 weeks working perfectly on Overcome. Nothing changed, or updated, nothing installed for days, and all what was ever installed are programs I already have on my two other Android phones, it simply froze in the middle of work. Wipe didn't work, changing file system didn't work, etc...
Read the thread: http://forum.xda-developers.com/showthread.php?t=1133590
Very good material.
nidza said:
You have also special thread with many scenarios how to fix your tablet if anything goes wrong.
It helped me yesterday to revive my Galaxy Tab. Just suddenly it started freezing and restarting, after 3 weeks working perfectly on Overcome. Nothing changed, or updated, nothing installed for days, and all what was ever installed are programs I already have on my two other Android phones, it simply froze in the middle of work. Wipe didn't work, changing file system didn't work, etc...
Read the thread: http://forum.xda-developers.com/showthread.php?t=1133590
Very good material.
Click to expand...
Click to collapse
Im very glad that the guide helps many ppl
@the Op : do me a fav and flash safe
Sent from my GT-P1000 using Tapatalk
k0sh said:
Im very glad that the guide helps many ppl
@the Op : do me a fav and flash safe
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Yup, in future i will be more careful when flashing, so glad that my tablet is back to normal (albeit with the Italian release of GB ) but everything works fine.
Will do more reading on the forums before undertaking any more flashing, make sure i know what i am doing and which Rom is best for me to use.
Cheers
Sent from my GT-P1000 using XDA App
geoyakult said:
Yup, in future i will be more careful when flashing, so glad that my tablet is back to normal (albeit with the Italian release of GB ) but everything works fine.
Will do more reading on the forums before undertaking any more flashing, make sure i know what i am doing and which Rom is best for me to use.
Cheers
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
best reaction i never read
Let's start with a little background as to how I got into this mess
- I had a perfectly working i8190L running SlimBean 4.3 from Maclaw (and I should've left it alone since its the wife's phone)
- I wanted to try out the new SlimKat 4.4 (http://get.novafusion.pl/?id=955)
- After a clean flash of slimkat, the new ROM was running fine after I completed setup EXCEPT baseband was 'xxxx'
- I rebooted into recovery and flashed GT-I8190_modem.bin-XXAMJ3-update2.zip because it was in my sdcard. I thought flashing a new radio would change the baseband except now I'm stuck in a bootloop with NO ABILITY TO BOOT TO RECOVERY!!!!
- I can only boot into Download mode, so I can still ODIN flash the system
Can someone suggest how/if I can fix this? I'm just kicking myself for turning a fully working phone into a brick with my wife breathing down my shoulders
my working setup was TWRP 2.7, SlimBean 4.3 and I had no idea which radio the i8190L came with default
I created a nandroid before all this mess, but I just need a way to get back into Recovery
You downloaded the wrong modem file. You need the one for the I8190L, but you flashed one for the I8190.
Sent from Tapatalk on my GT-I8190 running Novafusion's Carbon 4.4.2
chan1628 said:
Let's start with a little background as to how I got into this mess
- I had a perfectly working i8190L running SlimBean 4.3 from Maclaw (and I should've left it alone since its the wife's phone)
- I wanted to try out the new SlimKat 4.4 (http://get.novafusion.pl/?id=955)
- After a clean flash of slimkat, the new ROM was running fine after I completed setup EXCEPT baseband was 'xxxx'
- I rebooted into recovery and flashed GT-I8190_modem.bin-XXAMJ3-update2.zip because it was in my sdcard. I thought flashing a new radio would change the baseband except now I'm stuck in a bootloop with NO ABILITY TO BOOT TO RECOVERY!!!!
- I can only boot into Download mode, so I can still ODIN flash the system
Can someone suggest how/if I can fix this? I'm just kicking myself for turning a fully working phone into a brick with my wife breathing down my shoulders
my working setup was TWRP 2.7, SlimBean 4.3 and I had no idea which radio the i8190L came with default
I created a nandroid before all this mess, but I just need a way to get back into Recovery
Click to expand...
Click to collapse
Sorry but you are going to sleep on the couch tonight I suggest this:
You must download the original rom from SamMobile, install it through Odin and then install again through Odin the Recovery and through Recovery your "old" new Rom. When you are in the new Recovery check for the nandroid backup that you made . If it isnt there look for the couch because the phone is with the "old" new Rom without any of the past data.
Btw if you want you can upgrade your baseband from here:http://forum.xda-developers.com/showthread.php?t=2526831
Good luck
No recovery at all or bootloop in recovery as well?
Sent through time and space from my s3mini/CM11
chan1628 said:
Let's start with a little background as to how I got into this mess
- I had a perfectly working i8190L running SlimBean 4.3 from Maclaw (and I should've left it alone since its the wife's phone)
- I wanted to try out the new SlimKat 4.4 (http://get.novafusion.pl/?id=955)
- After a clean flash of slimkat, the new ROM was running fine after I completed setup EXCEPT baseband was 'xxxx'
- I rebooted into recovery and flashed GT-I8190_modem.bin-XXAMJ3-update2.zip because it was in my sdcard. I thought flashing a new radio would change the baseband except now I'm stuck in a bootloop with NO ABILITY TO BOOT TO RECOVERY!!!!
- I can only boot into Download mode, so I can still ODIN flash the system
Can someone suggest how/if I can fix this? I'm just kicking myself for turning a fully working phone into a brick with my wife breathing down my shoulders
my working setup was TWRP 2.7, SlimBean 4.3 and I had no idea which radio the i8190L came with default
I created a nandroid before all this mess, but I just need a way to get back into Recovery
Click to expand...
Click to collapse
Don't bother trying to flash it if nothing happens, drain the battery, return to seller and get replacement. I got free replacement from Amazon with my bricked rooted S3 mini.
jstath1972 said:
Sorry but you are going to sleep on the couch tonight I suggest this:
You must download the original rom from SamMobile, install it through Odin and then install again through Odin the Recovery and through Recovery your "old" new Rom. When you are in the new Recovery check for the nandroid backup that you made . If it isnt there look for the couch because the phone is with the "old" new Rom without any of the past data.
Btw if you want you can upgrade your baseband from here:http://forum.xda-developers.com/showthread.php?t=2526831
Good luck
Click to expand...
Click to collapse
just to clarify... what is consider "the original rom from SamMobile"? There are plenty of versions and country codes to choose from... I just wanted to make sure I'm downloading the correct one.... i've done enough of using the wrong files already
KoolKid98189 said:
Don't bother trying to flash it if nothing happens, drain the battery, return to seller and get replacement. I got free replacement from Amazon with my bricked rooted S3 mini.
Click to expand...
Click to collapse
its not going to be that easy for me... i've had this phone for almost 2yrs already
tys0n said:
No recovery at all or bootloop in recovery as well?
Sent through time and space from my s3mini/CM11
Click to expand...
Click to collapse
no recovery at all... it bootloops if i power on normally
chan1628 said:
just to clarify... what is consider "the original rom from SamMobile"? There are plenty of versions and country codes to choose from... I just wanted to make sure I'm downloading the correct one.... i've done enough of using the wrong files already
Click to expand...
Click to collapse
It depends on what country you're in and if the phone is locked to any specific carrier.
If it's not locked then I believe any i8190L firmware will do, just to get the phone running again.
chan1628 said:
its not going to be that easy for me... i've had this phone for almost 2yrs already
no recovery at all... it bootloops if i power on normally
Click to expand...
Click to collapse
It was a tough decision for me, it was either stick to a ****ty BlackBerry or get a free replacement and sacrifice the data. Some of it should be synced to your Google account
tys0n said:
It depends on what country you're in and if the phone is locked to any specific carrier.
If it's not locked then I believe any i8190L firmware will do, just to get the phone running again.
Click to expand...
Click to collapse
ok, i will give all this a try and hope for the best
thanks everyone for the quick responses :good:
You could also try to reflash just recovery thru Odin and see if it works.
Sent through time and space from my s3mini/CM11
chan1628 said:
just to clarify... what is consider "the original rom from SamMobile"? There are plenty of versions and country codes to choose from... I just wanted to make sure I'm downloading the correct one.... i've done enough of using the wrong files already
Click to expand...
Click to collapse
You are in Canada but the L version is for the Latin America countries. So the firmware must be from one of that countries. Which one i can't tell you. You should ask your seller.
[problem solved]
Ok, I was able to restore the phone with /u/jstath1972's suggestion
1. I went to http://www.sammobile.com/firmwares/ and downloaded the latest 'L' firmware
2. I used ODIN to flash the firmware
3. the phone REBOOTED!!!
(once the phone rebooted, the rest was easy)
4. powered off and ODIN flashed the lastest TWRP
5. powered off and booted into recovery
6. RESTORED NANDROID so wife would stop giving me the look
7. updated baseband as suggested: http://forum.xda-developers.com/show....php?t=2526831
THANK YOU THANK YOU :good:
side note: i wish my work was this effective in resolving technical issues (just my 2 cents)
chan1628 said:
Ok, I was able to restore the phone with /u/jstath1972's suggestion
1. I went to http://www.sammobile.com/firmwares/ and downloaded the latest 'L' firmware
2. I used ODIN to flash the firmware
3. the phone REBOOTED!!!
(once the phone rebooted, the rest was easy)
4. powered off and ODIN flashed the lastest TWRP
5. powered off and booted into recovery
6. RESTORED NANDROID so wife would stop giving me the look
7. updated baseband as suggested: http://forum.xda-developers.com/show....php?t=2526831
THANK YOU THANK YOU :good:
side note: i wish my work was this effective in resolving technical issues (just my 2 cents)
Click to expand...
Click to collapse
Good sleep tonight, my friend ! :good:
ive got safestrap installed. created rom slot. tried to load a rom and nothin. it boots to a wiped stock rom. nothin happens. nothin changes
harley1rocker said:
ive got safestrap installed. created rom slot. tried to load a rom and nothin. it boots to a wiped stock rom. nothin happens. nothin changes
Click to expand...
Click to collapse
You need to provide a lot more information if you want some help. What firmware are you on? What version of SafeStrap did you install? What ROM did you try to install? What steroids did you take? Which modules did you flash? Does your stock ROM boot?
Always provide as much information as possible, it will increase your chances of getting help.
Devo7v said:
You need to provide a lot more information if you want some help. What firmware are you on? What version of SafeStrap did you install? What ROM did you try to install? What steroids did you take? Which modules did you flash? Does your stock ROM boot?
Always provide as much information as possible, it will increase your chances of getting help.
Click to expand...
Click to collapse
Let me try, because I think I have the same issue. I'm running 4.4.2, and I used safestrap 3.73 to create a rom slot and install Hyperdrive. I wiped everything it said to before I installed it, and installed the latest masterpatch after and rebooted. When it rebooted, it appears to have gone into my stock ROM. Everything is the same, except my network doesn't work because it says my SIM card isn't inserted. Any ideas?
---------- Post added at 12:33 AM ---------- Previous post was at 12:20 AM ----------
Caboose27 said:
Let me try, because I think I have the same issue. I'm running 4.4.2, and I used safestrap 3.73 to create a rom slot and install Hyperdrive. I wiped everything it said to before I installed it, and installed the latest masterpatch after and rebooted. When it rebooted, it appears to have gone into my stock ROM. Everything is the same, except my network doesn't work because it says my SIM card isn't inserted. Any ideas?
Click to expand...
Click to collapse
And now I tried to wipe it again, and that ROM slot is gone, and I suddenly don't have room to make a new one.
*edit* apparently a wipe this time around reset my entire phone. No idea why. Is there a manual on this program somewhere? I keep getting told to search and I'll find it, but all I've found is about five lines worth of instructions.
Caboose27 said:
Let me try, because I think I have the same issue. I'm running 4.4.2, and I used safestrap 3.73 to create a rom slot and install Hyperdrive. I wiped everything it said to before I installed it, and installed the latest masterpatch after and rebooted. When it rebooted, it appears to have gone into my stock ROM. Everything is the same, except my network doesn't work because it says my SIM card isn't inserted. Any ideas?
---------- Post added at 12:33 AM ---------- Previous post was at 12:20 AM ----------
And now I tried to wipe it again, and that ROM slot is gone, and I suddenly don't have room to make a new one.
*edit* apparently a wipe this time around reset my entire phone. No idea why. Is there a manual on this program somewhere? I keep getting told to search and I'll find it, but all I've found is about five lines worth of instructions.
Click to expand...
Click to collapse
You cannot use ROM slots with SafeStrap 3.73. You have to install ROMs to your stock ROM slot overwriting your stock ROM. So make a backup before you flash anything. The developer of SafeStrap took a new job and had to abandon development before he could fully implement ROM slots on 4.4.2. I know it's difficult to find but the information is there. Thank you for trying to find it before posting.
EDIT: just so you're aware, I'm still on 4.2.2, so I haven't actually had any experience with SafeStrap on 4.4.2. I'm just relaying information I've read. So definitely do some reading before you do anything in case I'm wrong. If you have more questions I'll do my best to answer them, but make sure you fact check me because i wouldn't want to brick your phone.
Devo7v said:
You cannot use ROM slots with SafeStrap 3.73. You have to install ROMs to your stock ROM slot overwriting your stock ROM. So make a backup before you flash anything. The developer of SafeStrap took a new job and had to abandon development before he could fully implement ROM slots on 4.4.2. I know it's difficult to find but the information is there. Thank you for trying to find it before posting.
Click to expand...
Click to collapse
Yeah, if that information is out there, it's pretty deep. Like, Mariana's Trench deep. At least now it'll be up front. So basically, SafeStrap is a custom recovery in itself, bypassing the need for an unlocked bootloader?
Caboose27 said:
Yeah, if that information is out there, it's pretty deep. Like, Mariana's Trench deep. At least now it'll be up front. So basically, SafeStrap is a custom recovery in itself, bypassing the need for an unlocked bootloader?
Click to expand...
Click to collapse
same version of bootstrap. same prob here. and let me get this str8...over write stock rom slot? isnt that suppose to be like the "safe zone"
Caboose27 said:
Yeah, if that information is out there, it's pretty deep. Like, Mariana's Trench deep. At least now it'll be up front. So basically, SafeStrap is a custom recovery in itself, bypassing the need for an unlocked bootloader?
Click to expand...
Click to collapse
SafeStrap does not bypass the bootloader, it loads after the kernel loads so there is no way to install a custom kernel. This means that you can only use ROMs that are compatible with your stock kernel, no AOSP ROMs and no CM. You can only use TouchWiz-based ROMs.
harley1rocker said:
same version of bootstrap. same prob here. and let me get this str8...over write stock rom slot? isnt that suppose to be like the "safe zone"
Click to expand...
Click to collapse
That is the way it was intended to work, but Samsung changed some things in 4.4.2 and the developer didn't have time to reimplement ROM slots before he left.
Devo7v said:
SafeStrap does not bypass the bootloader, it loads after the kernel loads so there is no way to install a custom kernel. This means that you can only use ROMs that are compatible with your stock kernel, no AOSP ROMs and no CM. You can only use TouchWiz-based ROMs.
That is the way it was intended to work, but Samsung changed some things in 4.4.2 and the developer didn't have time to reimplement ROM slots before he left.
Click to expand...
Click to collapse
I got it working. I have the 4.4.2 kernel and the Graviton ROM flashed after using Safestrap to make a backup. After I flashed the rom, I wiped dalvik and cache, flashed the master patch v.2, wiped again, and rebooted. Everything works except the stock camera app, which I'm currently looking for a fix.
master patch link??
Devo7v said:
You cannot use ROM slots with SafeStrap 3.73. You have to install ROMs to your stock ROM slot overwriting your stock ROM. So make a backup before you flash anything. The developer of SafeStrap took a new job and had to abandon development before he could fully implement ROM slots on 4.4.2. I know it's difficult to find but the information is there. Thank you for trying to find it before posting.
EDIT: just so you're aware, I'm still on 4.2.2, so I haven't actually had any experience with SafeStrap on 4.4.2. I'm just relaying information I've read. So definitely do some reading before you do anything in case I'm wrong. If you have more questions I'll do my best to answer them, but make sure you fact check me because i wouldn't want to brick your phone.
Click to expand...
Click to collapse
DONT TRY OVERWRITING YOUR STOCK ROM SLOT WITH HYPERDRIVE ROM. YOU WILL LOSE SAFESTRAP AND IT BREAKS CAMERA WIFI,basiclly your phone wont work. Ive done it ant now have a s4 active paperweight. Ive tried odin and all the tar,pit and rar files you can find. NOTHIN WORKS. Before any1 says take it to bestbuy....i did. Kies and all the merry samsung reps culdnt put it back together. So before flashing anything over your stock rom slot make dam sure your a rocket scientist or at the very least a software engineer for samsung...
harley1rocker said:
DONT TRY OVERWRITING YOUR STOCK ROM SLOT WITH HYPERDRIVE ROM. YOU WILL LOSE SAFESTRAP AND IT BREAKS CAMERA WIFI,basiclly your phone wont work. Ive done it ant now have a s4 active paperweight. Ive tried odin and all the tar,pit and rar files you can find. NOTHIN WORKS. Before any1 says take it to bestbuy....i did. Kies and all the merry samsung reps culdnt put it back together. So before flashing anything over your stock rom slot make dam sure your a rocket scientist or at the very least a software engineer for samsung...
Click to expand...
Click to collapse
You need to flash the modules after flashing the ROM to get everything working again. Make sure you do it before you allow Hyperdrive to boot for the first time.
Also, in order to use Odin you cannot have Kies installed.
Devo7v said:
You need to flash the modules after flashing the ROM to get everything working again. Make sure you do it before you allow Hyperdrive to boot for the first time.
Also, in order to use Odin you cannot have Kies installed.
Click to expand...
Click to collapse
Way past that dude. The phone only allows me to enter into DL mode as of now. I know i was on ne3 htperdrive when this happened. Can you pls post a link for the correct tar file to use in odin? Ive tried most of those files but none worked. Can u post the correct ones for odin? May the software gods be with me....ima gonna need em....thanx dude
harley1rocker said:
Way past that dude. The phone only allows me to enter into DL mode as of now. I know i was on ne3 htperdrive when this happened. Can you pls post a link for the correct tar file to use in odin? Ive tried most of those files but none worked. Can u post the correct ones for odin? May the software gods be with me....ima gonna need em....thanx dude
Click to expand...
Click to collapse
Follow the instructions and you'll be fine. Remember, since you're on NE3 you can only flash NC9 or NE3.
http://forum.xda-developers.com/showthread.php?t=2835481
I need some help here, and I need to stop bothering the guys in the ROM forum about it so I'm asking here instead.
It's a t-mobile note 4. I was running Dynamic Kat on it and it was suggested I update the modem and bootloader with a partial flash file. Now my phone is stuck in a bootloop.
I CAN get into both download mode and TWRP, however, so it seems like this should be fixable. I'd be happy with even going back to fully stock and rerooting it.
I found this thread: http://forum.xda-developers.com/not...to-downgrade-cod6-to-nk4-upgrade-nk4-t3095585 which seems to about flashing back to stock NK4 or cod6. I know those are bootloaders, but I don't really understand what they mean beyond that.
Or can I just flash to the new stock lollipop t-mobile put out this week? If so, how? If anyone has the time to help me with this, I would really appreciate it.
Edit: I found instructions on sammobile.com. Going to try them. *fixed
Caelrie said:
I need some help here, and I need to stop bothering the guys in the ROM forum about it so I'm asking here instead.
It's a t-mobile note 4. I was running Dynamic Kat on it and it was suggested I update the modem and bootloader with a partial flash file. Now my phone is stuck in a bootloop.
I CAN get into both download mode and TWRP, however, so it seems like this should be fixable. I'd be happy with even going back to fully stock and rerooting it.
I found this thread: http://forum.xda-developers.com/not...to-downgrade-cod6-to-nk4-upgrade-nk4-t3095585 which seems to about flashing back to stock NK4 or cod6. I know those are bootloaders, but I don't really understand what they mean beyond that.
Or can I just flash to the new stock lollipop t-mobile put out this week? If so, how? If anyone has the time to help me with this, I would really appreciate it.
Edit: I found instructions on sammobile.com. Going to try them.
Click to expand...
Click to collapse
Easy fix. ODIN flash the stock COD6 software. Then start over again with cf auto root. There is a thread that had all of the files you need in one zip.
Sent from my SM-N910T using XDA Free mobile app
Yayyy I think it worked! Stock Lollipop is booting up. It's in the Optimizing apps phase.
Caelrie said:
Yayyy I think it worked! Stock Lollipop is booting up. It's in the Optimizing apps phase.
Click to expand...
Click to collapse
Are you the same one who renamed the tar.md5 file to tar? If so, when you ask for help you really should mention all the steps you took to get there. Where it went wrong, etc.
When in doubt, Odin flash full firmware to get back to stock. There are other steps you could have taken as well but Odin is almost always a surefire bet.
(Also remember to hit the thanks button for those who have helped you get things sorted, like that fella above and the people who helped you in the rom thread- not me of course because I didn't do anything but for those who did I'm sure they would appreciate it)
absinthesummer said:
Are you the same one who renamed the tar.md5 file to tar? If so, when you ask for help you really should mention all the steps you took to get there. Where it went wrong, etc.
When in doubt, Odin flash full firmware to get back to stock. There are other steps you could have taken as well but Odin is almost always a surefire bet.
(Also remember to hit the thanks button for those who have helped you get things sorted, like that fella above and the people who helped you in the rom thread- not me of course because I didn't do anything but for those who did I'm sure they would appreciate it)
Click to expand...
Click to collapse
Yah, that was me. I came over here to ask for help instead because I shouldn't be bothering you guys in the ROM thread. I was making progress though. By the time I made this thread, I'd figured out that if I could get into TWRP or download mode, I could odin my way out of it. Just needed some help on that doing that, but then I figured that out too thanks to sammobile
Caelrie said:
Yah, that was me. I came over here to ask for help instead because I shouldn't be bothering you guys in the ROM thread. I was making progress though. By the time I made this thread, I'd figured out that if I could get into TWRP or download mode, I could odin my way out of it. Just needed some help on that doing that, but then I figured that out too thanks to sammobile
Click to expand...
Click to collapse
Cool, glad you got it sorted. Yeah as long as you can access download mode you're golden, and a bonus if you can get into recovery as well.
Excellent job actually searching and reading and fixing your problem, far too many people want answers just handed to them, so kudos to you for that.
Just for the future if you need help, try to remember and list all steps you took (even if you don't know where you went wrong) in excruciating detail because it helps us troubleshoot and figure out what the problem is. Without certain pertinent info it could take a lot longer to solve it.
Overall good job, glad you're up & running.
Go to rapture download the rom and load it to sd card. Then follow directions exactly and u will be ok. No loading anything. Fresh start
BAD ASS NOTE 4
I am in the same boat with the boot loop. I flashed the partial firmware file as well and I did not rename it and the flash went fine. After that it boot to the screen that says powered by Android then it reboots over and over. Currently downloading the stock cod so I can odin that.
ElAguila said:
I am in the same boat with the boot loop. I flashed the partial firmware file as well and I did not rename it and the flash went fine. After that it boot to the screen that says powered by Android then it reboots over and over. Currently downloading the stock cod so I can odin that.
Click to expand...
Click to collapse
Technically you shouldn't be flashing just the partial firmware. It sets up a base so that you can flash a lollipop rom in recovery without issues. I'm not sure why someone is recommending just flashing the partial firmware only. I guess they figured it wouldn't cause issues.
Anyway, here is how the partial firmware should be used:
Flash partial firmware in Odin
Flash flashable stock lollipop in recovery.
Set up rom, make a backup.
From here you can restore your old kitkat backups without the problems that some are seeing (those who Odin the full firmware are having problems restoring kitkat backups/flashing kitkat roms without Odining ank4 first). The partial firmware prevents that but it's designed to be flashed right before flashing a lollipop rom.
I hope that helps some of you who are having issues.
Long story shorter. Phone stolen. Phone had nandroid stored on my computer. Phone replaced by another Note 4 (PS, thief go pound sand). Didn't mess around, stock rom to Note 4 (ANK). Root. Recovery. Old image from lost phone used as recovery. (Yeah I didn't make a backup of original from new phone). Flashed over. Everything works fine. Now ready to put finger prints in. Error page pops up saying fingerprint scanner error. 72 hours of scouring this forum, internet, MULTIPLE stock rom flashes from the oldest to NJK to ANK and COG6. Clean flash, dirty flash NOTHING works. Makes no difference what I do, cannot get the fingerprint scanner to perform. Common problem, complaints all over the internet about it but NO SOLUTIONS. I have tried everything down to deleting directories and I cannot get the damn thing to work. Seriously doubt hardware issue. *#0*# sensor heading shows finger print scanner as Null and 0.0.0.0. Deleted cache. Deleted data from TIBU and now after three days I give up. Seems everyone has the problem but nobody knows why and when they do you get a half assed or worse answer as to how to fix it. Does anybody know how to get this thing working again. Do I need to flash an apk. Where can I find it. Do I need to rebuild. ? Can anyone flash that section fingerprint free and send it to me. I am just guessing. I know crap about how stuff works, I just know how to follow directions but this one has got me stumped.
Any help would be GREATLY APPRECIATED!
Regards,
Freddie did not get fingered but he needs it.
You need to flash stock firmware and verify that all is stock, sometimes after returning to stock you may have a miss matching error like bootloader or modem.
After running stock run smartswitch.
Pp.
PanchoPlanet said:
You need to flash stock firmware and verify that all is stock, sometimes after returning to stock you may have a miss matching error like bootloader or modem.
After running stock run smartswitch.
Pp.
Click to expand...
Click to collapse
Ok forgive me for my ignorance but if I run a stock firmware straight from Sammy shouldn't the bootloader and modem be part of the rom? It seems to me that doing a wipe should be like reinstalling windows, you format the drive and install the OS. There is nothing left and a complete rebuild of the file system occurs. Is this not what happens when you do a wipe in the recovery and then Odin the stock firmware? How can I be sure that when I install a stock rom everything is wiped and there is no hangers and the OS on the phone is rebuilt completely? When you say smartswitch I assume you mean the Sammy program.
jackler1 said:
Ok forgive me for my ignorance but if I run a stock firmware straight from Sammy shouldn't the bootloader and modem be part of the rom? It seems to me that doing a wipe should be like reinstalling windows, you format the drive and install the OS. There is nothing left and a complete rebuild of the file system occurs. Is this not what happens when you do a wipe in the recovery and then Odin the stock firmware? How can I be sure that when I install a stock rom everything is wiped and there is no hangers and the OS on the phone is rebuilt completely? When you say smartswitch I assume you mean the Sammy program.
Click to expand...
Click to collapse
Ok, I think I have found it but now I need to know how to fix it. Currently I have as follows in the about device screen:
Model SN-N910T
AHHA ------!!!!! - ANDROID VERSION 5.0
Baseband - N910TU1ANK4
Kernal version - 3.10.0-2796035 [email protected] #1 Thu Nov 13 18:01:07 KST 2014
Build number - KTU84P.N910TUVU1ANK4
So it seems the android version is wrong. Again forgive my stupidity but what exactly IS the android version. Meaning is that the baseband, the modem, what part of the stock rom is flashed wrong and where do I find that part to flash it correctly. I think I am making some progress just need input. Thanks Pp for getting me on track, now I just need a little shove to get this train rolling and maybe learn something in the process. If I fix it I then intend to write a proper write up for those lost souls out there who don't have to spend days....
So why does it say my android version is 5.0 when it should say 4.4.4?
Thank,
Freddy is getting nervous
First verify what version of the note 4 you have, Sm-N910T or Sm-N910T3 and flash proper firmware. Look under your battery.
Once you root you jumble up the phones ability to install firmware properly, and flashing stock firmware once with odin does not always secure components thus leaving you with unofficial status, "custom" and you think you went back to stock with no root but not official yet.
You need to make sure everything flashes and sticks, Model nunber, Android version, Basedand version, Kernel version, Build number.
Any of the modified components can stick and not be overwritten by stock odin flash.
Sometimes multiple flashes, or individual component flashes are required to go back to "official" stock form.
At this point you can verify that your fingerprint scanner works properly and leave it alone or proceed cautiously if root is really required ??? .
I only run stock and save myself all the headaches, I used to root back when Samsung phones where simple and less complicated without kernel security from Samsung.
I suggest latest 5.1.1 lollipop update, kitkat is primitive and outdated, you will be amazed at how well your note will run with latest firmware (with junk apps disabled).
Pp.
Here's a sample of my stock Note 4 running latest update.
Pp.
PanchoPlanet said:
Here's a sample of my stock Note 4 running latest update.
Pp.
Click to expand...
Click to collapse
Nope, I have wiped this phone a million times, reinstalled factory rom over the top of itself a dozen times, installed the baseband and bootloader separately after that and NOTHING changes it still will not work. I have read the complete internet from front to back and it seems nobody knows but the shadow.....Thanks for taking the time for trying to help me out though...
When you say wipe, do you mean factory reset?
Several resets in a row should wipe it clean. Something is stuck, could be the kernel, that will prevent a clean install.
You need to find a way to wipe partitions individually using ADB on the PC, that should allow for a clean install.
Pp.
jackler1 said:
Long story shorter. Phone stolen. Phone had nandroid stored on my computer. Phone replaced by another Note 4 (PS, thief go pound sand). Didn't mess around, stock rom to Note 4 (ANK). Root. Recovery. Old image from lost phone used as recovery. (Yeah I didn't make a backup of original from new phone). Flashed over. Everything works fine. Now ready to put finger prints in. Error page pops up saying fingerprint scanner error. 72 hours of scouring this forum, internet, MULTIPLE stock rom flashes from the oldest to NJK to ANK and COG6. Clean flash, dirty flash NOTHING works. Makes no difference what I do, cannot get the fingerprint scanner to perform. Common problem, complaints all over the internet about it but NO SOLUTIONS. I have tried everything down to deleting directories and I cannot get the damn thing to work. Seriously doubt hardware issue. *#0*# sensor heading shows finger print scanner as Null and 0.0.0.0. Deleted cache. Deleted data from TIBU and now after three days I give up. Seems everyone has the problem but nobody knows why and when they do you get a half assed or worse answer as to how to fix it. Does anybody know how to get this thing working again. Do I need to flash an apk. Where can I find it. Do I need to rebuild. ? Can anyone flash that section fingerprint free and send it to me. I am just guessing. I know crap about how stuff works, I just know how to follow directions but this one has got me stumped.
Any help would be GREATLY APPRECIATED!
Regards,
Freddie did not get fingered but he needs it.
Click to expand...
Click to collapse
try doing this...
1st - run chainfire triangle away v3.26
2nd - boot into recovery and wipe everything 3 times except external sdcard.. especially data...
3rd - boot in download mode and ODIN whatever firmware u wanna use... 2 times...
happened to me when the note 4 first came out... I had to exchange to a new note 4...
also whenever u do a nandroid.. U MUST REMOVE ANY SAVED FINGERPRINTS... so u can use that backup again..
if u restore a nandroid with a saved frintprints, it won't work, u must delete data and start fresh..
I don't know if u messed it up by restoring a nandroid from a previous phone and with saved fingerprints stored...
will do thanks for the advice will advise
Nope, nothing I do including stock or otherwise works. When you hit +#0*# it says null and 0.0.0.0 unless someone knows something I don't, it's borked. The thing is even if I used a nandroid and it overwrote my fingerprints where the ones in the nandroid so you would think it would work. Chalk it up to who knows....thanks anyway. Still looking if anyone finds solution....