hey,
when i tried to root my mobile "lg l90 d410" AGAIN by using towelroot , it showed me this message "this phone isn't currently supported".
on a side note: i rooted it before using towelroot!
hessien zaghloul said:
hey,
when i tried to root my mobile "lg l90 d410" AGAIN by using towelroot , it showed me this message "this phone isn't currently supported".
on a side note: i rooted it before using towelroot!
Click to expand...
Click to collapse
Because u updated ur phone ..
towelroot won't support the kernels which buld after june 3rd...
so instead try this one purpledrake (its for G3 but working for all LG devices..)
Its working for d410 ..
check this link
http://forum.xda-developers.com/showpost.php?p=54254055&postcount=1
Did you do all towelroot require before use it?
hessien zaghloul said:
hey,
when i tried to root my mobile "lg l90 d410" AGAIN by using towelroot , it showed me this message "this phone isn't currently supported".
on a side note: i rooted it before using towelroot!
Click to expand...
Click to collapse
Did you do all is required ?
When i did i do this before:
1 - Settings > Security > and opt in Unknown Sources to allow install third-party apps
2- Downloaded it
3 - Transfer the apk to the phone via USB cable if you downloaded it from PC.
4 - Run it and install.
5 - Grant permission to install if you device says "It's not recommended to install towelroot.apk."
6 -Wait while installation completes.
7 - Run it.
8 - Click on "Make it ra1n"
Related
Hi
I have tested the root tool from China forum. My device is SGP312 WIFI 32GB 10.3.1.C.0.136. No need to unlocked.
Download the attachment and install. One click and then it will reboot. It is rooted!
But the root-mangement software is Chinese. You can download Supersu or Superuser.
Use the Chinese root software to give Supersu or Superuser root access.
Run Supersu or Superuser and upgrade the binary. Exit and uninstall the Chinese root software.
Reboot. Then you are rooted with Supersu or Superuser.
This is the original link: http://www.mgyun.com/vroot
incredible...works on sgp321 .244......good job....juat install supersu afterwards and remove the chinese app....greatttttt
Good! I can confirm it works, just rooted my still locked SGP311FR with it.
What I don't like it's an exe file, install the app then run it to root.
If someone can extract the script and replace the root apk by superSU it would be cool.
Also I noticed while rooting my tablet that the screen became white two times (really fast for less than a second, sort of blink) like the Display tricks that were used before to root our xperia's.
Anyway thanks.
Btw : @insideccw posting a link to the source, and maybe the name of the autor of this tool, would be better if it's not your own tool.
babylonbwoy said:
Also I noticed while rooting my tablet that the screen became white two times (really fast for less than a second, sort of blink) like the Display tricks that were used before to root our xperia's.
Click to expand...
Click to collapse
That might be the exploit that is accessing the framebuffer causing it.
works like a charm on my sgp351 lte 16gb .244, recomended, thans for the post
Also working with Xperia sp
Sent from my C5303 using Tapatalk 4
I tried this with my 312, but upon removing the chinese superuser with Titanium-backup, i could no longer use Superuser or SuperSU from the play-store. Any insight on to what exactly you guys went about this? I have reset using PC Companion.
Word fine With 4.2.2 thx a lot
Sent from my SGP321 using XDA Premium 4 mobile app
bugger561 said:
I tried this with my 312, but upon removing the chinese superuser with Titanium-backup, i could no longer use Superuser or SuperSU from the play-store. Any insight on to what exactly you guys went about this? I have reset using PC Companion.
Click to expand...
Click to collapse
I think you need to install the alternative superuser app before deleting the Chinese one. I used superuser by chainsdd on my sp
Sent from my C5303 using Tapatalk 4
works great...thanks
That's pretty much what I did. I've tried SuperSU, superuser, and the cwm app. The problem seems to be that the updated binaries don't "stick", SuperSU claimed updating was a success but then prompted me to do so every time I opened it.
bugger561 said:
That's pretty much what I did. I've tried SuperSU, superuser, and the cwm app. The problem seems to be that the updated binaries don't "stick", SuperSU claimed updating was a success but then prompted me to do so every time I opened it.
Click to expand...
Click to collapse
I don't know if the info in this thread may be of any use : http://forum.xda-developers.com/showthread.php?t=1539711.
Specifically in the OP :
Remember, if you remove older first without installing newer one, you will lose Root n newer won't run.
One more thing market version will be regular application, so hard reset can delete it. So better install with flashable zip, to make it system application.
And in Post #8 :
Confirmed working fine! Recommended to install via CWM. It will replace the other (superuser) automatically so you don't have to manually remove it.
I used the above zip file and instructions a long time ago on my Galaxy S....but it may still be relevant for Tablet Z.
What I've been doing us installing from the play store, updating binaries, and then removing the Chinese app. Once I do that, I lose root in the market superSU and other root apps.
I'll probably end up unlocking the boot loader and flashing an image over adb.
Thanks for the help!
bugger
That is because you dont have /system r/w access.
bugger561 said:
What I've been doing us installing from the play store, updating binaries, and then removing the Chinese app. Once I do that, I lose root in the market superSU and other root apps.
I'll probably end up unlocking the boot loader and flashing an image over adb.
Thanks for the help!
Click to expand...
Click to collapse
bugger561 said:
What I've been doing us installing from the play store, updating binaries, and then removing the Chinese app. Once I do that, I lose root in the market superSU and other root apps.
I'll probably end up unlocking the boot loader and flashing an image over adb.
Thanks for the help!
Click to expand...
Click to collapse
It worked for me...I accidentally removed the Chinese app.
1. I did a reroot again.
2. installed dualrecovery and flashed the UPDATE-SuperSU-v1.65.zip.
3. It works now.
Supersu and cwm superuser caused my phone to go in a reboot loop when I tried updating the binaries. Superuser by ChainsDD is working fine though.
Sent from my C5303 using Tapatalk 4
insideccw,
Any tips on how t go about correcting this? Would I need to use adb or can I handle this form within android?
EDIT: Looks like others are having the same issue.
Doesn't work with SGP321 LTE tablet (on the newest firmware .244)
1. in order to uninstall the chinese root app one needs to have SuperSu
2. once you install SuperSU the root checker shows "OK, you're rooted"
3. once you get rid of the chinese root the root checker shows "you're NOT rooted" and the SuperSU binaries can't get updated (strange it needs another update)
Geezer said:
Doesn't work with SGP321 LTE tablet (on the newest firmware .244)
1. in order to uninstall the chinese root app one needs to have SuperSu
2. once you install SuperSU the root checker shows "OK, you're rooted"
3. once you get rid of the chinese root the root checker shows "you're NOT rooted" and the SuperSU binaries can't get updated (strange it needs another update)
Click to expand...
Click to collapse
Works on mine. Update the superuser binaries before deleting Chinese superuser app. On mine, supersu detected the Chinese one and deleted it for me
Sent from my C5303 using Tapatalk 4
bugger561 said:
That's pretty much what I did. I've tried SuperSU, superuser, and the cwm app. The problem seems to be that the updated binaries don't "stick", SuperSU claimed updating was a success but then prompted me to do so every time I opened it.
Click to expand...
Click to collapse
For those of you having this issue as I was, I just got mine to work with SuperSU. Hopefully these steps will work for you too:
-Gain root with the magical Chinese root tool
-install SuperSU
-update SuperSU binaries
-in SuperSU settings, choose "Switch superuser app"
-reboot the tablet and immediately go to the playstore and install SuperSU
-update SuperSU binaries
Let me know if it works!
You can safely first root using vroot so install it on your pc
so connect your phone (usb debug activated before) to pc, start vroot and click ROOT, wait phone reboot itself and disconnect from pc
download clockworkmod superuser from playstore, launch it, update binary
download Titanium backup (full version) , and from recents apps kill all open apps
launch Titanium backup and freeze Vroot (you recognize it at the end of the list a blue sheld icon) , then relaunch clockworkmod superuser and re-update binary , reboot device , and finally uninstall Vroot using Titanium Backup
Rooted and Cleaned G Flex
:good:
does this root can be undone . since the rooted devices lose their warranty ?
does this root works without ANY PROBLEMS OR DRAW BACKS?
thank you for your effort
mahmoudwifi said:
does this root can be undone . since the rooted devices lose their warranty ?
does this root works without ANY PROBLEMS OR DRAW BACKS?
thank you for your effort
Click to expand...
Click to collapse
Finally you'll have clockworkmod superuser so...
Boot loader
Unlockable?
Sent from my Nexus 4 using Tapatalk
Akoolive said:
Boot loader
Unlockable?
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
on last LG Phones bootloader is not unloackable, but is LOCKIable . See Original development section.....
Hi, I am from Singapore and I am looking the steps by steps instructions to root my Samsung Galaxy SIII LTE. Below are the details of my phone.
Model Number : GT-I9305
Android Version : 4.3
Baseband Version : I9305XXUEMK1
Kernel Version : 3.031-2051278
Build Number : JSS15J.I9305XXUEML8
Please help to provide the step by step instructions.
Thanks
009scorpion said:
Hi, I am from Singapore and I am looking the steps by steps instructions to root my Samsung Galaxy SIII LTE. Below are the details of my phone.
Model Number : GT-I9305
Android Version : 4.3
Baseband Version : I9305XXUEMK1
Kernel Version : 3.031-2051278
Build Number : JSS15J.I9305XXUEML8
Please help to provide the step by step instructions.
Thanks
Click to expand...
Click to collapse
Its all posted p[lease search and read.
Re
JJEgan said:
Its all posted p[lease search and read.
Click to expand...
Click to collapse
Sorry I am new to this forum. I did searched but the models and versions are different from mine.
Could you please be kind enough to provide me the links? Thanks.
If the models and versions are different then you don't have this phone ???
If you have I9305 then please read multiple identical posts asking the same question day after day .
http://forum.xda-developers.com/galaxy-s3/development-i9305
STICKYS FAQS and GUIDES
http://forum.xda-developers.com/showthread.php?t=2344125
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
Downgrade and network problems .
http://forum.xda-developers.com/showthread.php?t=2531221
Root Impossible
Hey Guys, i just tried different Softwares, and the latest Root patch on Dev-Board for the S3 LTE
but i dont know how to work...
i use odin to flash it on CWS, then i restart and get into SD Card, load RootSuperSUBuysBox etc..
it will installed and everythin looks fine,. when i restart my phone then comes this up:
SuperSU has Stoped "ok"
Security Information: The System has blocked a APP called SuperSU to grant access for something etc...
so i guess Knox will take him out,.. but... i go to the settings ---> software and turned of everything what to do with Knox.
finally i downloaded a single SuperSU package and installed it. it works but when i start it the message comes up: u dont have SU, please install SU manually to use SuperSU.
so guys.. im really speechless.. sorry for my bad grammatic but im really sad about this.. i dont know hot to fix that. i dont want this terrible knox anymore on my system!
maybe i do some mistake while flashing and installing SU ?
i dont know.. i cant find really a helpful post or thread about this.
PLEASE HELP!
My System:
Modelnumber: GT-I9305
Android Version: 4.3
Basisbandversion: I9305XXUEMK1
Kernel-Version: 3.0.31-2051278 [email protected]#1 Thu Nov 28 13:11:27 KST 2013
Buildnumber: JSS15J.I9305XXUEMKC
SELinux-Status: Enforcing SEPF_GT-I9305_4.3_0010
Please please Help!
Kyrane said:
Hey Guys, i just tried different Softwares, and the latest Root patch on Dev-Board for the S3 LTE
but i dont know how to work...
i use odin to flash it on CWS, then i restart and get into SD Card, load RootSuperSUBuysBox etc..
it will installed and everythin looks fine,. when i restart my phone then comes this up:
SuperSU has Stoped "ok"
Security Information: The System has blocked a APP called SuperSU to grant access for something etc...
so i guess Knox will take him out,.. but... i go to the settings ---> software and turned of everything what to do with Knox.
finally i downloaded a single SuperSU package and installed it. it works but when i start it the message comes up: u dont have SU, please install SU manually to use SuperSU.
so guys.. im really speechless.. sorry for my bad grammatic but im really sad about this.. i dont know hot to fix that. i dont want this terrible knox anymore on my system!
maybe i do some mistake while flashing and installing SU ?
i dont know.. i cant find really a helpful post or thread about this.
PLEASE HELP!
My System:
Modelnumber: GT-I9305
Android Version: 4.3
Basisbandversion: I9305XXUEMK1
Kernel-Version: 3.0.31-2051278 [email protected]#1 Thu Nov 28 13:11:27 KST 2013
Buildnumber: JSS15J.I9305XXUEMKC
SELinux-Status: Enforcing SEPF_GT-I9305_4.3_0010
Please please Help!
Click to expand...
Click to collapse
Hi,
I'm not sure what method you use to root your phone but for me, I managed to gain root access through this method.
1) Root phone using CF auto root for I9305. http://download.chainfire.eu/232/CF-Root/CF-Auto-Root/CF-Auto-Root-m3-m3zh-gti9305.zip Phone says SuperSU has stopped unexpectedly and Knox says an app has attempted to bla bla...
2) Download this zip file here. http://download.chainfire.eu/382/SuperSU/UPDATE-SuperSU-v1.93.zip
3) Unzip the file on your computer, go to "common" folder in the extracted files.
4) See this Superuser.apk in the folder? Copy that to your Galaxy S3 I9305. (DO NOT TOUCH OTHER FILES IN THE FOLDER. ONLY COPY THE SUPERUSER.APK FILE.)
5) Make sure Unknown Sources is ticked in Settings > More > Security.
6) Get a file manager and install the Superuser.apk you just copied from your computer to your phone.
7) Open the SuperSU app and a popup will prompt you to disable knox. Disable Knox and you should have root access.
Credits to: http://www.droidviews.com/disable-knox-security-service-on-samsung-galaxy-devices/
Hope i helped at all
re
yes, it did worked but everytime i reboot my phone, the message ""unfortunately supersu has stopped"" appeared again. i have to reinstall supersu everytime i reboot my phone. is there any solution to fix this permanently?
009scorpion said:
yes, it did worked but everytime i reboot my phone, the message ""unfortunately supersu has stopped"" appeared again. i have to reinstall supersu everytime i reboot my phone. is there any solution to fix this permanently?
Click to expand...
Click to collapse
The previous post by me was exactly what i did. I just rebooted my i9305 and SuperSU doesn't force close. I also still have root access even after rebooting my phone. No buttons to press anymore. I'm really sorry if I couldn't help you.
Just to be sure, try re-installing the Superuser.apk again. Then open the new SuperSU app and go to Settings. Is the version number v1.93?
By the way, My I9305 has exactly the same firmware as yours, Baseband: ...XXUEMK1, Build number: ...XXUEML8
Root doesn't work...
I've tried a lot to root my i9305 after the 4.3 update, none of them being successful.
Samsung have also decided to make it even harder for us which means that 4.1.2 cannot be flashed back onto i9305 after 4.3 has been installed..
I'm really pissed off at them for that.
I hope your golf ball/band-aid galaxy s5 goes well.
I managed to root my i9305. I have problems to flash custom roms thou. When will we be able to do that? I don't care about my warranty being void.
Hazerm said:
Hi,
I'm not sure what method you use to root your phone but for me, I managed to gain root access through this method.
1) Root phone using CF auto root for I9305. http://download.chainfire.eu/232/CF-Root/CF-Auto-Root/CF-Auto-Root-m3-m3zh-gti9305.zip Phone says SuperSU has stopped unexpectedly and Knox says an app has attempted to bla bla...
2) Download this zip file here. http://download.chainfire.eu/382/SuperSU/UPDATE-SuperSU-v1.93.zip
3) Unzip the file on your computer, go to "common" folder in the extracted files.
4) See this Superuser.apk in the folder? Copy that to your Galaxy S3 I9305. (DO NOT TOUCH OTHER FILES IN THE FOLDER. ONLY COPY THE SUPERUSER.APK FILE.)
5) Make sure Unknown Sources is ticked in Settings > More > Security.
6) Get a file manager and install the Superuser.apk you just copied from your computer to your phone.
7) Open the SuperSU app and a popup will prompt you to disable knox. Disable Knox and you should have root access.
Credits to: http://www.droidviews.com/disable-knox-security-service-on-samsung-galaxy-devices/
Hope i helped at all
Click to expand...
Click to collapse
Hello,
I make the update today for version 4.3 and i can make root in my S3 LTE.
Can you please explain step by step the process to root the S3.
I´m a beginner and yours explanation is not detailed for me!! Sorry.
Thanks,
MigasMike
For you it would be easiest to download framaroot ( Google search it! ) I know it worked with me on 4.1 but it should work on 4.3 also. Try all three rooting modes in the app
Sent from my GT-I9305 using XDA Premium 4 mobile app
i saw ppl using Kingo App to root...and rooted succesfully....
spiderman07 said:
i saw ppl using Kingo App to root...and rooted succesfully....
Click to expand...
Click to collapse
Does it work for MKC?
I used the chainfire auto root method and had the same issue with Knox detecting supersu and stating the supersu had stopped. I found on the forum somewhere that all you have to do is simply ignore the Knox message and go to the play store and simply update supersu, when that's done and you open supersu it will now give you the option of disabling Knox. I've successfully rooted my 4.3 i9305 and installed Wanam exposed along with the Boeffla kernel.
Mr
Thanks
Hazerm said:
Hi,
I'm not sure what method you use to root your phone but for me, I managed to gain root access through this method.
1) Root phone using CF auto root for I9305. http://download.chainfire.eu/232/CF-Root/CF-Auto-Root/CF-Auto-Root-m3-m3zh-gti9305.zip
2) Download this zip file here. http://download.chainfire.eu/382/SuperSU/UPDATE-SuperSU-v1.93.zip
3) Unzip the file on your computer, go to "common" folder in the extracted files.
4) See this Superuser.apk in the folder? Copy that to your Galaxy S3 I9305. (DO NOT TOUCH OTHER FILES IN THE FOLDER. ONLY COPY THE SUPERUSER.APK FILE.)
5) Make sure Unknown Sources is ticked in Settings > More > Security.
6) Get a file manager and install the Superuser.apk you just copied from your computer to your phone.
7) Open the SuperSU app and a popup will prompt you to disable knox. Disable Knox and you should have root access.
Credits to: http://www.droidviews.com/disable-knox-security-service-on-samsung-galaxy-devices/
Hope i helped at all
Click to expand...
Click to collapse
For me had worked!
I have a I9305XXUEMK1 with 4.3.
Could i uninstall completely Knox? and use another firewall?
Thanks
after i've reboot the phone it reboots as unrooted same issue like you guys ... the solution comes with updating supersu... i've reboot the phone and still rooted... i really hope this will be a permanent solution.
since you don't care about your warranty it's easy to install a custom ROM...flash a custom Recovery(i recommend CWM) and flash the ROM you want...back-up first in case something bad happens(never did in my case) and follow install instruction for the ROM you are installing...
Hi there, I just rooted my s3 lte 4.3 and it says SU not working, I can't install the apk and I can't update in playstore, what should I do?
Hello,
i bought an XT894 from USA, it is coming with 4.0.4 ICS installed. I would like to install cyanogenmod, but i saw the guide and it is for 4.1.2. So i tried to update the phone (from android) and it says there are some errors. I tried to root it using "ics404root" and it says that phone is rooted, but root checker says "Sorry! the device does not have proper root access.". What should i do? If the phone is not rooted i can't install safestrap
neo87cs said:
Hello,
i bought an XT894 from USA, it is coming with 4.0.4 ICS installed. I would like to install cyanogenmod, but i saw the guide and it is for 4.1.2. So i tried to update the phone (from android) and it says there are some errors. I tried to root it using "ics404root" and it says that phone is rooted, but root checker says "Sorry! the device does not have proper root access.". What should i do? If the phone is not rooted i can't install safestrap
Click to expand...
Click to collapse
Root with saferoot http://forum.xda-developers.com/droid-4/development/root-droid-4-xt894-jellybean-saferoot-t2816462
Sent from my DROIDX using XDA Free mobile app
sd_shadow said:
Root with saferoot http://forum.xda-developers.com/droid-4/development/root-droid-4-xt894-jellybean-saferoot-t2816462
Sent from my DROIDX using XDA Free mobile app
Click to expand...
Click to collapse
It worked, you are a genius... Without your video (that show how to let the phone recognized by saferoot) i will never root my phone :good:
I have OEM non-rooted phone with original 4.4.4 Android.
Phone keeps bugging me about installing the latest OTA Lollipop update it downloaded over WiFi even without my permission.
How would I disable it? Apparently with possible MMC Fail I don't want any updates installed.
toshik1 said:
I have OEM non-rooted phone with original 4.4.4 Android.
Phone keeps bugging me about installing the latest OTA Lollipop update it downloaded over WiFi even without my permission.
How would I disable it? Apparently with possible MMC Fail I don't want any updates installed.
Click to expand...
Click to collapse
1.non root method
If you dont want to root You can download "package disabler pro" app ftom playstore and disable "software update" from apps list.
2.Root method
Root your phone and install titanium backup app from playstore then from titanium backup app search in app list "software update" click on it and hit freeze.
For root you can use kingroot app since you are on kitkat or Twrp recovery+supersu method.
Hope this wil help.
Thanks! #1 worked like charm
toshik1 said:
Thanks! #1 worked like charm
Click to expand...
Click to collapse
Not only the "Software Update" but also the "System Update" (in some ROMS like the Jasmine 3).
Also, you want to delete the 400M update file /cache/fota/update.zip
Why dont you want to uodate?
I just picked up a t-mobile note 4. Currently on EPG2 baeband, Should I be concerned with firmware updates?