I am planning to flash a custom rom on my phone (for the first time).
Model : Xperia SP(C5302)
Build : 12.1.A.1.205 (Stock) running JB 4.3 with LB
I have rooted my phone using the towelroot method and installed supersu. I have also installed custom recovery from here http://forum.xda-developers.com/showthread.php?t=2649923
I am planning to flash this custom rom http://forum.xda-developers.com/xperia-sp/development/cyanogenmod-11-locked-bootloader-users-t2868398
So I have a few questions that I am not clear about(even after searching the forums). And sorry if they are dumb. I really want to understand as much as possible before flashing roms.:fingers-crossed:
1. After reading the thread of my recovery, from what I understand, the recoveries are installed in /system. But on OP of the custom rom, I am about to install, there is an instruction to format /system before flashing the rom. So my question is if I format the /system partition, won’t my recoveries be removed (by the recoveries itself) before I even flash the rom?
2. Also will the recovery still be available to me if say I enter bootloop for some reason during flashing the rom?(asking for the same reason as above that is wiping my /system should also remove my recoveries)
3. Does CM 11 come with any inbuilt custom recovery? If not can I install the one I am already using (assuming installing a custom rom will remove my installed recoveries)?
4. Say I screw up during the flashing procedure. So if I want to rectify this I should first flash the stock .205 ftf, root, install a recovery again and then restore using the nandroid backup. Am I correct?
5. Is it necessary to wipe cache and dalvik cache before flashing rom? I see this instruction in some roms but not in others. And dalvik should be wiped after flashing rom and gapps, right?
6. Should I install supersu again after I flash the rom. I read in an article that it causes problems with CM. As far as I know CM11 comes pre-installed with superuser. But it also supposedly causes some problems.
7. Is it safe to restore user app+data, messages and contacts backed up using Titanium backup on a newly flashed rom? I have seen conflicted views on this.
Click to expand...
Click to collapse
And that’s it for my questions (for now at least... ).
A Big Thanks in advance for all your helpful answers
Prat92 said:
I am planning to flash a custom rom on my phone (for the first time).
Model : Xperia SP(C5302)
Build : 12.1.A.1.205 (Stock) running JB 4.3 with LB
I have rooted my phone using the towelroot method and installed supersu. I have also installed custom recovery from here http://forum.xda-developers.com/showthread.php?t=2649923
I am planning to flash this custom rom http://forum.xda-developers.com/xperia-sp/development/cyanogenmod-11-locked-bootloader-users-t2868398
So I have a few questions that I am not clear about(even after searching the forums). And sorry if they are dumb. I really want to understand as much as possible before flashing roms.:fingers-crossed:
And that’s it for my questions (for now at least... ).
A Big Thanks in advance for all your helpful answers
Click to expand...
Click to collapse
First of all, I am only explaining the one I know about
1. Well, wiping the system will remove the recovery. That's why you'll have to flash the ROM after wiping the system. Do not ever reboot the phone after wiping the system but haven't yet flashed the ROM zip, else you'll have to do more work to flash the Stock ROM. This is due to the fact your phone does not have an OS to boot into! When flashing the ROM zip, the recovery will be automatically installed.
2. This is based on luck, most of time you'll end up unable to boot into anything. A fix is to flash the Stock ROM again.
3. Every ROM has recovery built with it (unless stated otherwise in the thread)! Upon flashing, it will be automatically installed too.
4. The methods you mentioned is correct. However, only restore the nandroid backup if you want to stay on stock. You could always retry to flash the ROM again. Nandroid backup is an image backup of your android. If you restore your nandroid backup, you'll end up with your previous version of android (like the way before you started flashing the ROM)
5. Wiping /cache and dalvik-cache is a really good practise! It doesn't really matter when you will need to wipe them, but personally I wipe them all before flashing the ROM. Wiping /data and performing a factory reset through recovery is recommended if you're coming from a different ROM. That's why backing up user apps through TiB (Titanium Backup) is recommended for you to easily get your installed apps back. Remember, nandroid backup and apps backup from TiB is different to each other.
6. No, this might cause extreme conflicts. No, I am using SuperUser as long as I have used CM. It never fails to give root permission at all despite the hatred I sense in some apps that overly-recommends SuperSU.
7. Of course it is very safe to restore them backups with TiB. However, based on my experience, messages and contacts were unable to be restored due to the difference in ROM version. I don't know if anyone else faces the same problem as mine. As of this, I really recommend your contacts to be synced with Google.
Heads up!
Based on this post, the dev of the ROM you wanted to flash, MrSteve555, recommends PhilZ when flashing the ROM.
TechnoSparks said:
First of all, I am only explaining the one I know about
1. Well, wiping the system will remove the recovery. That's why you'll have to flash the ROM after wiping the system. Do not ever reboot the phone after wiping the system but haven't yet flashed the ROM zip, else you'll have to do more work to flash the Stock ROM. This is due to the fact your phone does not have an OS to boot into! When flashing the ROM zip, the recovery will be automatically installed.
2. This is based on luck, most of time you'll end up unable to boot into anything. A fix is to flash the Stock ROM again.
3. Every ROM has recovery built with it (unless stated otherwise in the thread)! Upon flashing, it will be automatically installed too.
4. The methods you mentioned is correct. However, only restore the nandroid backup if you want to stay on stock. You could always retry to flash the ROM again. Nandroid backup is an image backup of your android. If you restore your nandroid backup, you'll end up with your previous version of android (like the way before you started flashing the ROM)
5. Wiping /cache and dalvik-cache is a really good practise! It doesn't really matter when you will need to wipe them, but personally I wipe them all before flashing the ROM. Wiping /data and performing a factory reset through recovery is recommended if you're coming from a different ROM. That's why backing up user apps through TiB (Titanium Backup) is recommended for you to easily get your installed apps back. Remember, nandroid backup and apps backup from TiB is different to each other.
6. No, this might cause extreme conflicts. No, I am using SuperUser as long as I have used CM. It never fails to give root permission at all despite the hatred I sense in some apps that overly-recommends SuperSU.
7. Of course it is very safe to restore them backups with TiB. However, based on my experience, messages and contacts were unable to be restored due to the difference in ROM version. I don't know if anyone else faces the same problem as mine. As of this, I really recommend your contacts to be synced with Google.
Heads up!
Based on this post, the dev of the ROM you wanted to flash, MrSteve555, recommends PhilZ when flashing the ROM.
Click to expand...
Click to collapse
Thanks for such detailed answers. That cleared most of my doubts
Just some last few questions(promise!)
1. If wiping /system does remove the recovery before I install the rom, how is it possible to access it even to flash the rom? Shouldn't it like just close right when I wipe /system. Or does it not work like that?
2. Just to be sure the nandroid backup I made on my stock rom won't work if I later try to flash it through recovery while using CM,right?
Prat92 said:
Thanks for such detailed answers. That cleared most of my doubts
Just some last few questions(promise!)
1. If wiping /system does remove the recovery before I install the rom, how is it possible to access it even to flash the rom? Shouldn't it like just close right when I wipe /system. Or does it not work like that?
2. Just to be sure the nandroid backup I made on my stock rom won't work if I later try to flash it through recovery while using CM,right?
Click to expand...
Click to collapse
1. Wiping system wont close the recovery at all. It still runs and you can still navigate within it. But remember do not reboot unless you've flashed the ROM! The mechanism of how the magic works is yet to be acknowledged. So I can't tell why it doesn't closes upon wipe. My best guess here is that the recovery might be running on a temporary partition perhaps. I hope a developer see this post and explains the magic.
2. Nandroid backup works all the time (if they are no errors when you are creating them). Nandroid backup is simply a backup of your whole device. If you're on CM, restoring nandroid backup will get your phone back to the way when you attempted the nandroid backup (stock ROM, rooted, and triple recoveries installed). Nandroid backup is useful when you're about to try something that may damage your ROM, without doing so much work to restore your device.
Say, you created a nandroid backup in cwm in which Cyanogenmod was installed. And then you flashed something afterwards. If that "something" damages the ROM and gives you bootloop, you can simply flash Stock ROM, root it again, install recoveries again, and restore the nandroid backup. Then, voilà, cyanogenmod is back. This will simplify your work rather than flash CM again, then gapps, then restore your apps and all those other things that will consume so much time
So a new nandroid backup will backup the whole device, in a form of an image.
Related
I read as much as I can about installation of a custom ROM. I think I'm confident enough to do it now, but I just want someone to review these steps before I start.
I have a Rogers I896 currently running the stock froyo that I upgraded via Kies with a build 10.10.
Because this is on a build 10.10 I can't follow the steps vertabim with the guide in the android development forum.
1. Root with SuperOneClick
2. Titanium Backup
3. Use Odin3 v1.7 or later to restore to stock with this http://forum.xda-developers.com/showthread.php?t=905042 and the 512 pit file. (I understand this is unnecessary as I'm already stock, but in case I need to revert back to stock from a custom ROM, this is what I'll do)
4. Reroot with SuperOneClick
5. Get the ROM and put it in the root of the phone
6. Download ROM Manager and install Clockwork Recovery
7. Boot into recovery and install zip from SD card and choose the zip file that I downloaded.
8. Titanium Backup to restore
Please let me know if I'm missing something. I think I read something about Nandroid backup somewhere in the forums. I'm not exactly sure what that is and it didn't really say that in the guide. Should I do that and how do I perform that?
I'm thinking about installing either Paragon, Serendipity, or di11i. Perhaps someone can also maybe list some differences, issues, pros and cons about these ROMs.
Thanks in advance!
your steps are good enough for you to flash to a new rom.
You may have trouble with installing Clockwork. If you do, follow this link.
Also, once you reboot into clockwork, remember to do a backup of your current ROM and move it and your TiBu backups to your HD. Clearing your cache before you install your new ROM isn't a bad idea either
Goodluck!
Is clearing cache done in the clockwork recovery? I notice an option for "clear download cache" from Rom manager. Is that the same thing?
integrasaurus said:
You may have trouble with installing Clockwork. If you do, follow this link.
Also, once you reboot into clockwork, remember to do a backup of your current ROM and move it and your TiBu backups to your HD. Clearing your cache before you install your new ROM isn't a bad idea either
Goodluck!
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I896 using XDA App
likiud said:
Is clearing cache done in the clockwork recovery? I notice an option for "clear download cache" from Rom manager. Is that the same thing?
I do not think "clear cache" is necessary when you install a new rom, since most of rom will format the related partitions first. You can clear the dalvik cache in the cwm.
A master clear is recommended since it will reset your phone to factory default and delete all the data in your built-in sdcard.
Click to expand...
Click to collapse
mengbo said:
likiud said:
Is clearing cache done in the clockwork recovery? I notice an option for "clear download cache" from Rom manager. Is that the same thing?
I do not think "clear cache" is necessary when you install a new rom, since most of rom will format the related partitions first. You can clear the dalvik cache in the cwm.
A master clear is recommended since it will reset your phone to factory default and delete all the data in your built-in sdcard.
Click to expand...
Click to collapse
It doesn't hurt AFAIK. I do notice after restoring apps with TiBu some apps require you to clear their cache in order to work properly, so I do it as a preventative measure.
Another tip: do NOT restore all system data with TiBu after you flash!
Click to expand...
Click to collapse
I started on Rogers stock 2.2.
Used superoneclick to root. Installed rom manager. Used a script to modify my recovery 3e file. Rebooted into recovery. Flashed cwm. Installed my custom rom.
Pretty awesome.
Sent from my SGH-i896
Hey I don’t mean to hijack/bump the thread but I’ve got an I896 which I’m attempting to flash a custom ROM onto, but I’m a complete phone newbie and could use some assistance when it comes to clarifying some instructions. This thread seemed to be the most “laid out” instruction guide for the I896 which I could find.
Currently my phone is running 2.2 Froyo / I896UXJL1 / Kernel 2.6.32.9 which I got via Kies early January when the update was released by Rogers.
I downloaded SuperOneClick 1.7 and rooted it without problems, but that’s as far as I’m clear/comfortable.
1. Do I need to use Odin (http://forum.xda-developers.com/showthread.php?t=905042) to restore to stock? Since I’m on the default Rogers technically that is already stock, no? Can I simply continue on from where I am?
a. If I don’t need to use Odin, do I need to make a backup with titanium?
2. Does step 6 of the OP’s list simply involve hitting the “Flash ClockworkMod Recovery” option in ROM Manager v3.0.1.0?
3. After that is it simply a matter of downloading my ROM of choice (Serendipity 5.12) and putting the .zip into my root folder, booting into recovery via the “Reboot into Recovery” option in ROM Manager, and then selecting to install the ROM .zip file?
4. Is my above three points everything I need to know or is there anything else I should know/be considered?
Also, when rooting I simply turned USB debugging on, ran the two .exe’s in order and then hit root after plugging in my phone. Was I supposed to go into download mode or anything or is that only for other modes of rooting (I have superuser installed and titanium backup was able to get root access so I assume my phone rooted properly).
That being said, I’ve read a ton of threads and a ton of stickies but things tend to seem either old/outdated or focusing on the AT&T i897, with there being limited information on a newbie friendly “explain all” way from A to B for the i896, unless I missed it. Some mention rooting with X, and using path ABC to root/flash a custom rom, and others mention rooting with Z and using patch DEF to do the same; all of which have left me feeling uneasy about flashing. ><
I'd be more then happy to provide any information in which I may have left out, and would appreciate any help I can get as I'm more then enthusiastic about flashing my first custom ROM but would like have the knowledge to do it right instead of being left with a brick. Yes, I know it seems almost all "bricked" captivates are unbrickable, though I would prefer to avoid that road at all costs either way haha.
mengbo said:
Another tip: do NOT restore all system data with TiBu after you flash!
Click to expand...
Click to collapse
I'm curious to know why not to restore system data?
Is "missing apps with data" ok to restore?
Restoring system data messes things up. Restore "missing apps with data" only. no system data.
If you restore system+data your home screen will fill up with force closes faster than you can clear them out, I know this Because I did it...twice, this is where my aww.W.T.F? sig came from. Don't panic if this noobish brain fart happens to you, just re-flash the rom and only restore missing apps+data as studacris said and enjoy.
I was using Ultimate ROM XXLSZ_JB_4.1.2_v5.2 without any problems apart from poor battery performance.
However, I attempted to install Rocket ROM-V1-XXLSZ and have now got myself into trouble.
I followed the instructions to flash the latest XXLSZ-OXA cwm kernel and then flashed the Rocket ROM. It worked ok but I would like to return to the Ultimate ROM and kernel I had before.
I have a pevious full Nandroid backup of the phone (made with ROM Manager Premium) of the Ultimate ROM and the PhilZ kernel it came with but cannot restore it. I get the error "MD5 Mismatch" and the restore aborts.
Even if I reflash the original Ultimate ROM with all the usual wipes, the XXLSZ-OXA cwm kernel is still there and I still can't restore from the Nandroid backup. I tried re-flashing PhilZ 3.1 kernel separately and then the Ultimate ROM file but this didn't work either. The kernel is still the same.
Can anyone tell me how to either
1. completely wipe the phone so I can install Ultimate ROM AND the built-in PhilZ 3.1 kernel.
OR
2. get the phone to the point where I can restore from my Nandroid backup which I assume will restore the earlier version of the ROM at the same time.
I hope I've explained the situation clearly enough.
Thanks in advance.
Trevor
Install a cm kernel then wipe your phone then install a fresh ultimate rom and later on advance restore the data
Sent from my GT-N7000 using Tapatalk 2
Go to cwm/backup and restore/misc nandroid setting/ untick md5 check. And try to restore again
Sent from my GT-N7000 using xda premium
You don't want to restore your nandroid. It is a bad backup.
In philz recovery go to mounts and storage. Format system data preload cache. Them go to advanced from main page and wipe dalvik
Flash ROM. Guaranteed to work.
Sent from my Samsung Galaxy SV using Tapatalk 3
Thanks. I know I can flash the ROM again but I was hoping to learn why the Nandroid backup no longer works.
Since posting, I gave up trying to restore the Nandroid backup, did all the usual wipes, re-flashed the Ultimate ROM and re-installed all my apps from scratch so my phone is more or less back to normal (Incidentally, I notice that no matter how many times I do this, all my music and photos are still there even though they're stored on the internal sd card. Dunno why).
Most of the ROMs I've tried have the kernel built in so all I needed to do was do the usual wipes and then flash. If I didn't like the ROM, I just wiped again and restored the Nandroid backup using CWM (Vol Up + Menu + Power) and the phone was back to its previous state.
The only thing I did different this time, as per the Rocket ROM instructions, was flash a kernel first. I may have done something wrong with that step or messed it up somehow. Even when I flashed an earlier version of the PhilZ kernel, the restore still didn't work. I've still a lot to learn about ROMs and Kernels, I guess.
As I said, I have successfully restored from Nandroid backups many times before this without any problem after experimenting with different custom ROMs. Can I ask you why Nandroid is a bad backup? Is it a problem with ROM Manager?
(One problem I've always had with ROM Manager is that if I choose to write the backup to the external sd card, it falls over with error messages. If I choose the option to backup to the internal card, it works but writes the BACKUP TO THE EXT CARD ANYWAY! I cannot get a reply from the dev about this).
Is there a better, more reliable backup method you'd recommend that does the same thing as the Nandroid?
I notice that different ROM managers use different CWM Recovery versions ie ROM Manager Reboot Recovery = 6.0.1.2, ROM Toolbox Rebooter = CWM 6.0.2.8 (same as Vol Up + Menu + Power). Could that be part of the problem?
Sorry for the long winded post.
Trevor
asf58967 said:
You don't want to restore your nandroid. It is a bad backup.
In philz recovery go to mounts and storage. Format system data preload cache. Them go to advanced from main page and wipe dalvik
Flash ROM. Guaranteed to work.
Sent from my Samsung Galaxy SV using Tapatalk 3
Click to expand...
Click to collapse
Hi there,
I recently rooted and flashed a custom ROM onto my Samsung Galaxy S3 Mini. I'm very new to this thing and find everything quite overwhelming, but I want to learn.
I flashed this ROM - http://forum.xda-developers.com/showthread.php?t=2119219 (the v6 No Wipe version because I was petrified about losing my data if I factory reset), but the phone is now extremely laggy and buggy, so I want to go back to the stock ROM (so I can do a nandroid backup) and then try a different custom ROM like Dmod.
So, my question is, do I have to factory reset my phone to go back to stock? Or can I just flash this file (http://hotfile.com/dl/189271016/833...T-I8190N-BTU-I8190NXXALL6-1356151513.zip.html) using the CWN recovery menu without wiping? I'm asking because my phone keeps giving me an error everytime I try to backup using the CWM Recovery menu.
Thanks and if you need me to explain something in further detail, let me know.
YamiWheeler said:
Hi there,
I recently rooted and flashed a custom ROM onto my Samsung Galaxy S3 Mini. I'm very new to this thing and find everything quite overwhelming, but I want to learn.
I flashed this ROM - http://forum.xda-developers.com/showthread.php?t=2119219 (the v6 No Wipe version because I was petrified about losing my data if I factory reset), but the phone is now extremely laggy and buggy, so I want to go back to the stock ROM (so I can do a nandroid backup) and then try a different custom ROM like Dmod.
So, my question is, do I have to factory reset my phone to go back to stock? Or can I just flash this file (http://hotfile.com/dl/189271016/833...T-I8190N-BTU-I8190NXXALL6-1356151513.zip.html) using the CWN recovery menu without wiping? I'm asking because my phone keeps giving me an error everytime I try to backup using the CWM Recovery menu.
Thanks and if you need me to explain something in further detail, let me know.
Click to expand...
Click to collapse
That firmware is a zipped odin-file. Can't be flashed in CWM.
Make a cwm nandroid backup of your "/data" to your external sd (that's your installed apps)
You can also backup your apps and appdata using titanium backup or similar, for later restore.
Just remember to never backup/restore systemapps.
Backup internal sd to computer just to be sure, if you in any situation have to make a factory reset. Make sure any kind of backup is on your external sd before you make factory reset, or it will be lost forever
YamiWheeler said:
Hi there,
I recently rooted and flashed a custom ROM onto my Samsung Galaxy S3 Mini. I'm very new to this thing and find everything quite overwhelming, but I want to learn.
I flashed this ROM - http://forum.xda-developers.com/showthread.php?t=2119219 (the v6 No Wipe version because I was petrified about losing my data if I factory reset), but the phone is now extremely laggy and buggy, so I want to go back to the stock ROM (so I can do a nandroid backup) and then try a different custom ROM like Dmod.
So, my question is, do I have to factory reset my phone to go back to stock? Or can I just flash this file (http://hotfile.com/dl/189271016/833...T-I8190N-BTU-I8190NXXALL6-1356151513.zip.html) using the CWN recovery menu without wiping? I'm asking because my phone keeps giving me an error everytime I try to backup using the CWM Recovery menu.
Thanks and if you need me to explain something in further detail, let me know.
Click to expand...
Click to collapse
Backup your data in CWM, flash my ROM and restore your data with CWM.
Benzonat0r said:
Backup your data in CWM, flash my ROM and restore your data with CWM.
Click to expand...
Click to collapse
CWM has NO choice to backup/restore only parts of the device. Only a full backup is possible.
This is only in TWRP. Pity! I only use CWM because TWRP makes corrupted backups (three times) for me.
Or is it possible to pick out only DATA from the backup? And what is happen with the dalvik cache, which
consists of the byte-code for all installed apps, optimized for the ROM which created it?
"advanced restore and restore only /data". Is this the way in CWM that you mean @benz?
JackoMJ
Yes that's exactly what I meant, "advanced restore and restore only /data"
You don't have to worry about cache and dalvik because it's automatically created on the initial start.
thx for the information Benz (usefull in the future perhaps),
but i´ve decided to use Titanium Backup.
JackoMJ
So I've rooted, unlock bootloader but still encrypted on my nexus 6. So far I went with Franco kernel & ViperAudio that's about it and I'm enjoying it.
I'm wanting to flash a custom ROM very soon and I'm new to this. Ive made backups thru twrp with nandroid already.So please bare with me.
Questions
Do I have to be decrypted before flashing a ROM?
Can I load viperaudo.zip & Franco kernel.zip along with Custom ROM, Gapps & SuperSU at the same time on Twrp?
From videos I've seen people just wipe on twrp and then install the ROM, is this a safe? Or is it better to a full factory wipe.
After flashing a ROM, will my old files still be there like pictures ive taken, stuff that I download & will my old apps be there still.
Thank you in advance.
1. its your choice, to stay encrypted or to decrypt. im still encrypted and running terminus rom
2. yes. but tge rom will always be the first flash, since itll overwrite anything you flash before it.
3. i normally dirty flash, meaning i dint wipe a single thing when flashing. that way i lose nothing. but, i always have a nandroid backup, just in case.
4. first off, your storage never gets touched, unless you wipe it yourself. if you dirty flash, you lose nothing. if you clean flash, you factory reset the phone and need to reinstall your apps, through backup of somekind or manually.
simms22 said:
1. its your choice, to stay encrypted or to decrypt. im still encrypted and running terminus rom
2. yes. but tge rom will always be the first flash, since itll overwrite anything you flash before it.
3. i normally dirty flash, meaning i dint wipe a single thing when flashing. that way i lose nothing. but, i always have a nandroid backup, just in case.
4. first off, your storage never gets touched, unless you wipe it yourself. if you dirty flash, you lose nothing. if you clean flash, you factory reset the phone and need to reinstall your apps, through backup of somekind or manually.
Click to expand...
Click to collapse
So flash the ROM, gapps and super su as the thread of the ROM says and then use the ROM for a bit and then twrp and flash ViperAudio and kernel...
So if I lose nothing do I need to reinstall the apps...
Thanks for the response
jussaren said:
So flash the ROM, gapps and super su as the thread of the ROM says and then use the ROM for a bit and then twrp and flash ViperAudio and kernel...
So if I lose nothing do I need to reinstall the apps...
Thanks for the response
Click to expand...
Click to collapse
id flash viper and your kernel at the same time, with the rim, gapps, abd supersu. if you dirty flash, you lose nothing. all you do is update what you already have. your apps stay. buts thats only during a "dirty" flash
simms22 said:
id flash viper and your kernel at the same time, with the rim, gapps, abd supersu. if you dirty flash, you lose nothing. all you do is update what you already have. your apps stay. buts thats only during a "dirty" flash
Click to expand...
Click to collapse
So for my case, stock and rooted and to install this ROM what are the primarily steps instead of dirty flashing. I wanna do everything from the phone.
Sorry for being a noob. I know if I fuxk up anything I can always revert to my nandroid backup.
Hey, so i opened my Bootloader and now I cant find how the hell to flash the latest Weekly version of Xiaomi EU, can someone help me? I searched on youtube but they flash via Fastboot and I don't see a weekly version with Fastboot
Follow the instructions found on the first post here https://forum.xda-developers.com/t/...mi-eu-rom-for-xiaomi-mi-11-pro-ultra.4260617/
Look at the bottom, there's an edit that tells you how to install TWRP, that's the primary way to install the new versions of that rom
Bananablob said:
Follow the instructions found on the first post here https://forum.xda-developers.com/t/...mi-eu-rom-for-xiaomi-mi-11-pro-ultra.4260617/
Look at the bottom, there's an edit that tells you how to install TWRP, that's the primary way to install the new versions of that rom
Click to expand...
Click to collapse
HELP - i flashed the EU rom and wiped Dalvik cache, and reeboted, now It reboots to the TWRP over and over again, what do I need to do?
You also need to wipe data and such before flashing, so maybe you didn't notice or forgot, but as long as you have TWRP, you can recover.
Maybe your ROM download got corrupted. If possible, check the checksum, they should provide it.
It's also possible your USB port + cable combo doesn't work properly, it's happened to many people, so if you are sure it's not the rest, it might be just that
Bananablob said:
You also need to wipe data and such before flashing, so maybe you didn't notice or forgot, but as long as you have TWRP, you can recover.
Maybe your ROM download got corrupted. If possible, check the checksum, they should provide it.
It's also possible your USB port + cable combo doesn't work properly, it's happened to many people, so if you are sure it's not the rest, it might be just that
Click to expand...
Click to collapse
I flashed it but now every app I open crushes, Im on weekly version and I restored apps from the Xaiomi backup, do you know why?
I can't say I do, but I'd assume it's because Xiaomi backup is configured to work only on stock roms.
It's possible that uninstalling and reinstalling each app using whatever the proper app shop is for the given app will fix it without losing the restored data and cache for it.
Bananablob said:
I can't say I do, but I'd assume it's because Xiaomi backup is configured to work only on stock roms.
It's possible that uninstalling and reinstalling each app using whatever the proper app shop is for the given app will fix it without losing the restored data and cache for it.
Click to expand...
Click to collapse
omg I only did it because i thought I would be able to restore everything within 1 click and now everything crushes. I have like 100 apps + tons of accounts to login
I would always assume auto backup things to fail when you need them.
Try to reflash your original rom from here and restore using the same backup tool: https://forum.xda-developers.com/t/miui-updates-tracker-mi-11-pro-ultra-star-mars.4263135/
Then you can reevaluate how you wanna backup and restore to transition.
It's possible it failed because you have an official rom backup, but it would work if the tool had backed up from Eu to Eu
Bananablob said:
I would always assume auto backup things to fail when you need them.
Try to reflash your original rom from here and restore using the same backup tool: https://forum.xda-developers.com/t/miui-updates-tracker-mi-11-pro-ultra-star-mars.4263135/
Then you can reevaluate how you wanna backup and restore to transition.
It's possible it failed because you have an official rom backup, but it would work if the tool had backed up from Eu to Eu
Click to expand...
Click to collapse
I dont wanna mess with reinstalling CN version, etc
I will just Factory reset and reinstall manually..
To factory reset in brings me to TWRP, why is it?
Because you installed TWRP instead of the normal recovery utility, you now have TRWP in that partition on your phone. If you use TWRP to flash the proper stock ROM, it will have the same effect as using factory reset using the stock recovery utility. BTW, the stock recovery utility is not built to support having flashed another rom, so you're in good hands having TWRP instead.
You probably had issues because you only wiped dalvik rather than format data after installing the EU ROM. You must format data after flash because the different branches have different partition layouts, hence your problems.
As you must format, you might as well start from scratch again or go in to twrp wipe menu and select format, type yes to confirm and then reboot system. If you want to go down the full install, then flash the ROM again, format data, with the yes confirmation, then reboot system. After each update, just a dalvik wipe is