Related
This is just an updated version of deadnex's original guide, with a few things thrown in from various people who have found what works and what doesn't.
This guide has been used and tested as effective with the windows 7 rc 7100 build.
Step 1 - Go here http://www.microsoft.com/windows/windows-7/download.aspx and download Windows 7. You can get a key from the same place, so don't worry about not having a key.
In the event that the servers aren't offering the download {due to server issues} you can download a current version through a torrent site. I recommend mininova as it's the most legitimate of the bunch.
To get a key for windows 7 (32bit) (if you downloaded it through a torrent site), go to this address https://www.microsoft.com/betaexperience/productkeys/win7-32/enus/default.aspx
(64bit)
https://www.microsoft.com/betaexperience/productkeys/win7-64/enus/default.aspx
To clarify this part, you're setting up a usb flash drive or usb card reader and sd card to work as an installation drive for windows 7. I've followed these steps exactly, and found them to be completely accurate. They work, so do each step, and make sure to keep track of your steps so as not to miss one.
Thanks to deadnex for all of this information.
USB-install:
User feedback suggests that doing this next part should be done on a computer running windows vista. In winXP, your usb drive might not show up during the process.
edit (before step 1, create a folder on your main computer called windows7. Don't do this on your shift, and it's recommended to use c:\windows7\ to make the process easier. If you use another location to extract the files to, make sure to remember which directory it is, and adjust the steps of this tutorial to your own location.)
1 - Open the windows7 Iso file with winrar, and extract all the files into C:\WINDOWS7\ (or the folder you created as mentioned above)
2 - Open command prompt in administrator mode (start - all programs - accessories - (right click) Command Prompt and select run as administrator.
3 - Then type these commands without the - and press enter after each :
- CD\
- DISKPART
- LIST DISK
- SELECT DISK X ( X is the memory stick disk number you got from LIST DISK)
- CLEAN (CAUTION; THIS WILL ERASE ALL THE CONTENTS OF THE SELECTED DISK)
- CREATE PARTITION PRIMARY
- SELECT PARTITION 1
- ACTIVE
- FORMAT FS=FAT32 QUICK
- ASSIGN
- EXIT
- XCOPY C:\WINDOWS7\*.* /S /E /F U:\ (U:\ is the name of usb drive you are using for your install, if your drive has another letter, which is most likely, of course put in your own) (after *.* and after each letter preceded by / there's a space!)
OPTIONAL- Include an extra folder on your windows7 usb drive called drivers, and put all the drivers in there that you'll need to get windows 7 running smooth. Drivers are listed just a little further down on the page, so before completing the next step, go there and get the drivers.
WARNING- THIS WILL ERASE YOUR VISTA AND REPLACE IT WITH WINDOWS 7. THIS IS IT!!! Don't worry, win7 rc 7100 is far better anyway. Just to be safe though, backup your personal data before continuing to the next step.
[edit] With a little use and time, I've come to find that windows 7 has a great amount of compatibility issues with certain games. Although I've only had the chance to try a few, there seems to be a trend with win7 being unable to run a lot of older, but still 3d, games. Warcraft 3, and Dungeon Keeper 2, to be more specific. If you're not a gamer, it shouldn't matter, and Windows 7 is still the best choice for you. If you do like to play games, you might want to reconsider changing to windows 7. [edit]
Restart your computer, at startup push FN+F10, and choose your usb drive.
This will take you to the installer, select your language, timezone, and keyboard layout. Next.
In summary, you're going to select Custon (advanced) in the windows 7 installation process, and some card readers (sd to usb) don't work.
This will not affect your HTC SHIFT Vista recovery partition but it will remove Vista itself from your shift. Your settings from Vista will not be carried over to Windows 7.
_________________________________________________________________
DRIVER DOWNLOADS AND INSTALLATION.
Well, once you're through all that, you should be looking at your new windows 7 shift. Now's the fun part! Driver installation!
Go to this link, and download all of the drivers. (10 in total)
http://www.htc.com/www/SupportDownload.aspx?p_id=60&cat=1&dl_id=82
Putting these files on the same flash drive as your windows 7 install makes matters much easier for this time and next time should you need to try again. I also recommend copying and pasting the installation order from the htc site in a notepad or wordpad file and putting that in the same folder as your drivers. That way, when it's time to install your drivers, you can open that file, and use it as a reference to ensure you have the order correct. Chances are that your shift won't connect to the net, right after the win7 installation.
IMPORTANT IMPORTANT IMPORTANT
INSTALL EACH DRIVER IN THE ORDER THAT HTC HAS LISTED ON THEIR DRIVER DOWNLOADS PAGE. DO THIS OR FACE TOTAL DEATHKILL!!! actually, you'll just have driver issues, but that SUCKS!
After many people have responded, I wish to remind everyone. Install all the drivers. INSTALL ALL THE DRIVERS. Install all the drivers. Yes, I said that three times. Although your shift seems to work, when only installing a few, the fact is, drivers like the synaptics touchpad driver also control other parts of your shift, like the two face bottons above the touch pad. If you install one driver, and skip one in between, you mess up the order of installation that is so important, and then force yourself to need an entire wipe and reinstallation of win 7. So, one more time, INSTALL ALL THE DRIVERS FROM HTC.
One more important thing to know about the drivers is, DON'T LET WINDOWS RESET AFTER INSTALLING EACH DRIVER, select RESTART LATER AFTER INSTALLING EACH DRIVER. I REPEAT, INSTALL ALL DRIVERS (IN ORDER) BEFORE RESTARTING WINDOWS.
IMPORTANT When you've finished installing your drivers but still need to restart to take effect, go to your display settings (right click the desktop) and select a non aero theme. save settings after that. Windows 7 Basic is a non aero theme and it looks good. If you leave Aero enabled, your shift will blue screen of death crash when it boots into high res mode.
Windows 7 can not run Aero in high res on the shift. (for now, at least)
When you install the drivers – beware that you have to install them with Vista Compatibility mode enabled and run as Administrator. Right-click the driver setup file – click the Compatibility tab – select Windows Vista and mark “run this file as Administrator”
To save yourself a headache, copy and paste the following list into a wordpad file and place it in the same directory as your driver downloads. Putting this list in the same directory on your win7 flash card means that you can open it on your shift after installing win7 and use it as a reference when installing your drivers. Keep it all together.
EACH DRIVER IS 100% IMPORTANT AND NEEDED, DO NOT SKIP DRIVERS, EVEN IF THAT DEVICE SEEMS TO BE WORKING ALREADY. SKIPPING THE TOUCHPAD DRIVER MEANS THAT THE RESOLUTION AND COMM CENTER BUTTONS DON'T WORK. SKIPPING THE SOUND DRIVER MEANS THAT CERTAIN APPS WILL CAUSE THE SYSTEM TO BLUE SCREEN. SKIPPING THE VIDEO DRIVERS MEANS THAT CERTAIN APPS WILL CAUSE THE SYSTEM TO BLUE SCREEN.
DON'T SKIP DRIVERS.
Here's the order.
a. VISTA_INTEL Chipset Driver v8[1].3.0.1014
b. Intel VGA driver(7[1].14.10.1461)
c. VistaECDrvV1[1].0.1.10
d. TouchScreen(1[1].1.0.2)
e. Synaptics MicroPad(10[1].0.11.1)
f. Realtek Audio Driver R197(6[1].0.1.5653)
g. Vitakey _AC5023_Fingerprint AP v5[1].0.2.0 and Driver v7.10.1.0 *
h. Extension Kit USBLanDriver(3[1].8.3.7)
i. Shagctrl_1[1].2.6.122-control center
j. Marvell WiFi driver(8[1].114.123.139)
This next part was contributed by Thaihugo. Thank you a ton for this contribution Thaihugo .
To connect the Windows Mobile (your Shift's other OS) side to the PC side of your Shift, run USB Tools in the windows mobile side. If nothing happens, go to your settings (still in mobile)- Connections, then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools first). Another note, some roms, for the wm side of shift, don't include the internet sharing app. If you can't find it, you've got a crap rom, and you should follow a guide which will allow you to put a real rom on it.
Make sure you are connected to the internet on win7 side (using wifi for example) to download WMDC (Windows Mobile Device Center).
If WMDC doesn't load, plug another pocket pc into the shift's usb port while running windows7 and it will download , or if you don't have another pocket pc lying around, download it manually from Microsoft.
Also, after this setup, the Snapvue side might turn off and not turn on again. In this case, reset under vista side using the HTC tools, and go to the power settings (long click or right click on the battery icon in the bottom right of your desktop). Disable all the "turn device off after x min" settings and make sure to click ok to make the changes effective.
Again, a big huge thanks to deadnex for originally posting the steps to this process. And thanks to everyone else who contributed to a better running shift via windows 7.
Caid.
444
You forgot to specify that drivers must be installed with Vista Compatibility mode enabled and run as Administrator
Everythnig works fine for me untill.. I boot from usb go to "install now". And then ...
"A required CD/DVD drive device driver is missing.If you have a driver floppy disk,CD,DVD or USB flash drive please insert it now.
Note: If the windows installation media is in the CD/DVD drive, you can safely remove it for this step"
I go to browse and then " No device drivers were found.Make sure that the installation media contains the correct drivers, and then click OK".
I'm completly lost help..
thanks for the reminder.
weird, list disk doesn't list my usb flash drive but lists all my other hard drives. what am i doing wrong?
You are probably under Windows XP. Try a vista computer or another computer for this operation.
Caid444, you can upgrade your guide with the following info:
To connect the Windows Mobile side to the PC, use the USB tools. If nothing happens, go to settings, Connections then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools).
Make sure you are connected to internet on vista side (using wifi for example) to download WMDC.
If WMDC doesn't load, plug in another pocket pc using the USB port, or download it manually.
Also, after this setup, the Snapvue side might turn off and never turn on. In this case, reset under vista side using the HTC tools, and go to the power settings (long click on the battery icon). Disable all the "turn device off after x min".
Thanks for your description. It looks good. Only onr thing let me bluescreen
my Shift. Whenever I install Synaptics MicroPad(10[1].0.11.1) my Device ended with a bluescreen. I tried a newer Version from the website, but no way, same result. Does anybody understand why? Does someone found out same?
Greets
Androgyn
thaihugo said:
Caid444, you can upgrade your guide with the following info:
To connect the Windows Mobile side to the PC, use the USB tools. If nothing happens, go to settings, Connections then click on "USB to PC". Uncheck the "Enable advanced network functionality and wait at least 5 minutes to see if it connects (you must enable the port in USB tools).
Make sure you are connected to internet on vista side (using wifi for example) to download WMDC.
If WMDC doesn't load, plug in another pocket pc using the USB port, or download it manually.
Also, after this setup, the Snapvue side might turn off and never turn on. In this case, reset under vista side using the HTC tools, and go to the power settings (long click on the battery icon). Disable all the "turn device off after x min".
Click to expand...
Click to collapse
I've added this part, thanks again Thaihugo.
Caid
444
thaihugo said:
You are probably under Windows XP. Try a vista computer or another computer for this operation.
Click to expand...
Click to collapse
You're right. it's all good though, i used MBRWIZ to take care of that minor setback. I can boot Windows 7 thru a USB drive now. I'm still on the fence about it, i have Vista Ultimate on my Shift right now. From your experience will Win 7 be drastically better?
Greenarcher707™ said:
You're right. it's all good though, i used MBRWIZ to take care of that minor setback. I can boot Windows 7 thru a USB drive now. I'm still on the fence about it, i have Vista Ultimate on my Shift right now. From your experience will Win 7 be drastically better?
Click to expand...
Click to collapse
It's like driving a race car compared to vista.
apoparis said:
Everythnig works fine for me untill.. I boot from usb go to "install now". And then ...
"A required CD/DVD drive device driver is missing.If you have a driver floppy disk,CD,DVD or USB flash drive please insert it now.
Note: If the windows installation media is in the CD/DVD drive, you can safely remove it for this step"
I go to browse and then " No device drivers were found.Make sure that the installation media contains the correct drivers, and then click OK".
I'm completly lost help..
Click to expand...
Click to collapse
Please, is there anybody who can help me resolve my problem? I tried lots of times by nothing works..I'm reading all these positive comments about win7 and I can't wait to have them on my shift.. I can see the usb, I browse there to the folder I have the drivers but can't install them.
Thank you in advance
This is for those who've encountered problems.
Start the whole process over again. I didn't make the guide clear enough when I first posted this thread. It's clearer now. The symantec drivers are probably fine, you're probably crashing because windows aero is still enabled, and it is crashing your shift whenever it tries to switch to high res mode. Disable aero.
As for apop, you need to install via the second option, not the first. I got the same error when I selected the first install option when I booted into the windows 7 installer. This method will completely remove vista as the main os and put it in another folder. As a precaution, I recommend backing up personal documents that are stored in any windows sub directory. *word documents and the likes.
Anything outside of your windows directory, or on the main hard drive itself should remain after the install, but I only did this process once with extra stuff on the drive (it stayed).
Back it up, and do a fresh install.
Caid.
444
Thanks for your anser Caid. I just don't have an external DVD.. Is it impossible to go through 1st way? I have read that some people managed to do it this way..
You mean via a usb flash drive? That's how I did it. Follow the steps for the usb flash drive method, but when you boot it on your shift and you have the option to do a custom or express install, do the custom install.
Caid
thaihugo said:
It's like driving a race car compared to vista.
Click to expand...
Click to collapse
wow, that got me convinced. installing windows 7 right now. gonna probably stay up late ha ha
Caid444 said:
You mean via a usb flash drive? That's how I did it. Follow the steps for the usb flash drive method, but when you boot it on your shift and you have the option to do a custom or express install, do the custom install.
Caid
Click to expand...
Click to collapse
Yes, I'm using a usb card reader and sd card. I don't have two options (custom/express). Just one "install now"..
P.S. Thanks for your interest in my case.
ok
After you select "install now" there'll be a license agreement. After that there'll be a choice between two install options. You need to choose the second one.
Caid.
Can someone explain to me how to set up a cellular internet connection through windows 7? I've got the sim card inside, the phone recognizes it, but I don't know how to get it working through win7, I used control center to enable modem, but still no luck. This is really annoying.
Caid.
444
SnapView Turn's and WM7 too ... the screen goes off
Hi, I completed the W7 installation successfully. I even got to conect SnapView with W7 this time. I say this time because with the previous Wm7 guide I wasn't able to do it.
Anyway, now my screen is blank for WM and W7. In fact I have to press the on switch to get the W7 screen back. Once I have W7 working I need to reset Snapview throught the Shift Control Centre to get it going. Finally Snapview / WM comes on. However it lasts on for a few minutes and then the screen is off again. W7 will last for a few minutes more and the same will happen. I then need to press the sliding switch again. The W7 screen will turn on back to normal (the OS doesn't actually turn off but just the screen); however, WM doesn't turn on (in this case it's the screen and WM itself). I then need to repeat the resetting process again.
I did do this:
"
Also, after this setup, the Snapvue side might turn off and not turn on again. In this case, reset under vista side using the HTC tools, and go to the power settings (long click or right click on the battery icon in the bottom right of your desktop). Disable all the "turn device off after x min" settings and make sure to click ok to make the changes effective"
I did it at W7. Am I missing something? Any hints from the experts? Needless to say, everything was working fine with Vista.
Thanks
01. Make a Clear Installation (Format, Boot from DVD, Install WIN 7).
02. Disable Aero Theme.
03. Install Chipset Driver for WIN 7 (Now is V 9.1.1.1025), from Intel Web Site (As Administrator). Restart.
04. Install VGA Driver for WIN 7 (Now is V 15.12.75.4.1930, 02 Oct. 2009), from Intel Web Site (As Administrator). Restart.
05. After is finished the Intel VGA installation, if you want you can enable again the Aero theme.
06. Go to Device Manager -> Monitors -> You will see something installed like Flat Panel Display (never mind, whatever you
will see installed from Win7, right click, update driver, browse my computer, let me pick of a list of device drivers, choose
Generic Non-PnP Monitor, Apply). Restart. Now, you will see some Resolution Choises that appeared.
07. Install HTC SHIFT ECD Device Driver for Vista (Compatibility Vista SP2, as Administrator).
08. Install HTC SHIFT Touch Screen Driver for Vista (Compatibility Vista SP2, as Administrator). Restart.
09. Install Synaptics Micropad Driver for WIN 7 (Now is V 14.0.3C for XP32/Vista32/Win7 32 Bit Signed Default), from Site
Synaptics (as Administrator). Restart.
10. Install Realtek High Definition Audio Driver for WIN 7 (Now is V R248 x86 Vista/Win7), from Realtek Web Site (As
Administrator). Restart.
11. Install HTC SHIFT Vitakey _AC5023_Fingerprint AP v5[1].0.2.0 and Driver v7.10.1.0, for Vista (Compatibility Vista SP2, as
Administrator). First Driver, then the Program. Restart.
12. Install manually from Device Manager HTC SHIFT Extension Kit USBLanDriver(3[1].8.3.7).
13. Install HTC SHIFT Marvell Wifi driver 8[1].114.123.139 (Compatibility Vista SP2, as Administrator). Restart.
14. Install HTC SHIFT shagctrl_1[1].2.6.122-control center (Compatibility Vista SP2, as Administrator). Do not Restart yet.
Install also HTC SHIFT ClearSnapVUE (Compatibility Vista SP2, as Administrator).
Before Restart, go to msconfig and disable Shift Control Center to start on Windows 7 boot. Then Restart.
15. Right Click on Synaptics Pointing Device in the tray of Win7 -> Pointing Device Properties -> Device Settings ->
Synaptics Touchpad V 6.5 -> Settings -> Buttons -> Scroll Down Button Action -> Run a program of your choosing -> C:\Program
Files\HTC\ResolutionSwitchLauncher.exe -> Apply. Scroll Left Button Action -> Run a program of your choosing -> C:\Program
Files\HTC\ControlCenterLauncher.exe -> Apply.
16. Go to Device Manager -> Monitors -> Generic Non-PnP Monitor -> Disable (or Unistall, but the next time Shift Restarts,
Win7 Will install again the Driver).
17. Push the Buttons for Shift Control Center or Resolution Changer, they are working fine (at least on my Shift). Only the
Brightness Buttos don't Work, for now. Enable Wi-Fi.
Do not install the patch from HTC for the Sidebar. It works fine in Win7.
18. Go to WinMo Side, if you have Liberated them -> Usb Tool -> Attach to Vista -> Go to Win7 Side -> Let Win7 to Search for
the Driver Online. After Finishing, you can Control the Modem too, from Shift Control Center, like in Vista.
19. Go to Windows Update and choose to Update some of the Device Drivers of the Shift, with no fear.
20. If you want Origami Experience 2.0 for Windows Vista, you can download it from here (no www after the 2 //,
download.microsoft.com/download/1/c/e/1ce7294b-fd7a-4159-bc11-7595070bffd8/OrigamiExperiencePackv2.msi). Install
(Compatibility Vista SP2, as Administrator). It works fine, but it does not make update in the weather option, at least to
me.
From my testings with no results, as i was reading several posts on the forum (Do not install C++ Redistributable 2005,
change language to Chinese etc.) for Shift Control Center in Win7, by accident i went on the folder Program Files\HTC and i
pushed manually to run ResolutionSwitchLauncher.exe. Then i had a message that the driver has changed. From this point i
started to look something about monitor settings.
If someone else from now on, find a solution for the monitor driver, so we can again make functional and the Brightness
Buttons, please inform me.
Greetings from Greece and thank you for your helping site.
P.S1 : I have not yet made WinMo side full Functional (GPS, Real VGA etc), because i do not understand exactly how to first
backup my original ROM. I only have liberated it with MoDaCo way. If someone can, please give me instructions to backup for
sure my original ROM first.
P.S2 : I Tested another thing too, on my Shift (see post 155 on forum.xda-developers.com/showthread.php?p=5450784).
I write there : I have the same Transcend External HDD from last summer, but only yesterday I had the time to make the
change. But I have the same problem that was mentioned in some posts before, the Bios recognizes the disk as 120GB, but when
you try to boot, it says "Primary Master Hard Disk Error". I boot from an Acronis Bootable Flash Disk 16GB, where I Have my
image od Vista with all my progs, but either the Acronis SWs do not Recognize the HDD (Toshiba MK1231GAL). The message is
"Failed to read from the sector 0 of hard disk 0". I had understood that something was wrong from the summer, because all the
Acronis SWs on my Notebook did not recognized the External Transcend HDD, eventhouth you see it in Windows (format, make
partitions, copy, delete things). Have you managed to boot any Operating System from that HDD (after you put it inside HTC
Shift) ??
See something interesting, on some sites as i was searching on Google, it says that MK1231GAL but with Part Number HDD1813
(like mine) is ATA7.
But here (02) : It says that MK1231GAL but with Part Number HDD1811 (not like mine) is ATA3-ATA4 compatible.
Does anyone know what is going on to inform me, please ??
Thanks you very much POWERSER !!!
thanks alot,
maybe you can write in bold, that the synaptics driver is from their side.
i was searching on htcs support side but there is just vers: 10[1].0.11.1
I followed all steps and now i have a fully functional SCC (except the brightness control of course). I am very pleased now with the shift.
Thanks for the instructions !
right now i am downloading all the stuff ..... hehe .
Hope Win 7 is going to do the trick . kinda tired of Vista
i think better is use us the synaptics from HTC vista download drivers,because work the boutons in the right side of the tablet
i work perfect with another instructions
thank you
Brightness control is active in win7 adjust? or not is possible up or down brightness?
PD: Edit to say to all that after update windows with all updates, brightness funtion is full in control center. All funtions of HTC Shif are OK with this guide, only change synaptics, i install HTC driver. My probes are with windows 7 starter and windows 7 ultimate x86.
Best Regards.
be-careful updates installation because make lot of problems
like to not work htc control center again or touch screen
maybe do not install optional update is solution !!
but the BIG problem is limited access with WI-FI connection to Internet
esykas said:
be-careful updates installation because make lot of problems
like to not work htc control center again or touch screen
maybe do not install optional update is solution !!
but the BIG problem is limited access with WI-FI connection to Internet
Click to expand...
Click to collapse
beware especially for the updates for .NET ... I think these cause the problem with Control Center [not working]
I backed up after each update installation...
problem with ssd
I had several problem with my SSD runecore. Couldnt install win 7, win 8. Installer gives me error to not format disk. It solved puppy linux http://www.puppylinux.com for me. I boot up in from usb, run gparted. Now i have win 8 on it and cant open Shift for ssd
POWERSER said:
01. Make a Clear Installation (Format, Boot from DVD, Install WIN 7).
02. Disable Aero Theme.
03. Install Chipset Driver for WIN 7 (Now is V 9.1.1.1025), from Intel Web Site (As Administrator). Restart.
04. Install VGA Driver for WIN 7 (Now is V 15.12.75.4.1930, 02 Oct. 2009), from Intel Web Site (As Administrator). Restart.
05. After is finished the Intel VGA installation, if you want you can enable again the Aero theme.
06. Go to Device Manager -> Monitors -> You will see something installed like Flat Panel Display (never mind, whatever you
will see installed from Win7, right click, update driver, browse my computer, let me pick of a list of device drivers, choose
Generic Non-PnP Monitor, Apply). Restart. Now, you will see some Resolution Choises that appeared.
07. Install HTC SHIFT ECD Device Driver for Vista (Compatibility Vista SP2, as Administrator).
08. Install HTC SHIFT Touch Screen Driver for Vista (Compatibility Vista SP2, as Administrator). Restart.
09. Install Synaptics Micropad Driver for WIN 7 (Now is V 14.0.3C for XP32/Vista32/Win7 32 Bit Signed Default), from Site
Synaptics (as Administrator). Restart.
10. Install Realtek High Definition Audio Driver for WIN 7 (Now is V R248 x86 Vista/Win7), from Realtek Web Site (As
Administrator). Restart.
11. Install HTC SHIFT Vitakey _AC5023_Fingerprint AP v5[1].0.2.0 and Driver v7.10.1.0, for Vista (Compatibility Vista SP2, as
Administrator). First Driver, then the Program. Restart.
12. Install manually from Device Manager HTC SHIFT Extension Kit USBLanDriver(3[1].8.3.7).
13. Install HTC SHIFT Marvell Wifi driver 8[1].114.123.139 (Compatibility Vista SP2, as Administrator). Restart.
14. Install HTC SHIFT shagctrl_1[1].2.6.122-control center (Compatibility Vista SP2, as Administrator). Do not Restart yet.
Install also HTC SHIFT ClearSnapVUE (Compatibility Vista SP2, as Administrator).
Before Restart, go to msconfig and disable Shift Control Center to start on Windows 7 boot. Then Restart.
15. Right Click on Synaptics Pointing Device in the tray of Win7 -> Pointing Device Properties -> Device Settings ->
Synaptics Touchpad V 6.5 -> Settings -> Buttons -> Scroll Down Button Action -> Run a program of your choosing -> C:\Program
Files\HTC\ResolutionSwitchLauncher.exe -> Apply. Scroll Left Button Action -> Run a program of your choosing -> C:\Program
Files\HTC\ControlCenterLauncher.exe -> Apply.
16. Go to Device Manager -> Monitors -> Generic Non-PnP Monitor -> Disable (or Unistall, but the next time Shift Restarts,
Win7 Will install again the Driver).
17. Push the Buttons for Shift Control Center or Resolution Changer, they are working fine (at least on my Shift). Only the
Brightness Buttos don't Work, for now. Enable Wi-Fi.
Do not install the patch from HTC for the Sidebar. It works fine in Win7.
18. Go to WinMo Side, if you have Liberated them -> Usb Tool -> Attach to Vista -> Go to Win7 Side -> Let Win7 to Search for
the Driver Online. After Finishing, you can Control the Modem too, from Shift Control Center, like in Vista.
19. Go to Windows Update and choose to Update some of the Device Drivers of the Shift, with no fear.
20. If you want Origami Experience 2.0 for Windows Vista, you can download it from here (no www after the 2 //,
download.microsoft.com/download/1/c/e/1ce7294b-fd7a-4159-bc11-7595070bffd8/OrigamiExperiencePackv2.msi). Install
(Compatibility Vista SP2, as Administrator). It works fine, but it does not make update in the weather option, at least to
me.
From my testings with no results, as i was reading several posts on the forum (Do not install C++ Redistributable 2005,
change language to Chinese etc.) for Shift Control Center in Win7, by accident i went on the folder Program Files\HTC and i
pushed manually to run ResolutionSwitchLauncher.exe. Then i had a message that the driver has changed. From this point i
started to look something about monitor settings.
If someone else from now on, find a solution for the monitor driver, so we can again make functional and the Brightness
Buttons, please inform me.
Greetings from Greece and thank you for your helping site.
P.S1 : I have not yet made WinMo side full Functional (GPS, Real VGA etc), because i do not understand exactly how to first
backup my original ROM. I only have liberated it with MoDaCo way. If someone can, please give me instructions to backup for
sure my original ROM first.
P.S2 : I Tested another thing too, on my Shift (see post 155 on forum.xda-developers.com/showthread.php?p=5450784).
I write there : I have the same Transcend External HDD from last summer, but only yesterday I had the time to make the
change. But I have the same problem that was mentioned in some posts before, the Bios recognizes the disk as 120GB, but when
you try to boot, it says "Primary Master Hard Disk Error". I boot from an Acronis Bootable Flash Disk 16GB, where I Have my
image od Vista with all my progs, but either the Acronis SWs do not Recognize the HDD (Toshiba MK1231GAL). The message is
"Failed to read from the sector 0 of hard disk 0". I had understood that something was wrong from the summer, because all the
Acronis SWs on my Notebook did not recognized the External Transcend HDD, eventhouth you see it in Windows (format, make
partitions, copy, delete things). Have you managed to boot any Operating System from that HDD (after you put it inside HTC
Shift) ??
See something interesting, on some sites as i was searching on Google, it says that MK1231GAL but with Part Number HDD1813
(like mine) is ATA7.
But here (02) : It says that MK1231GAL but with Part Number HDD1811 (not like mine) is ATA3-ATA4 compatible.
Does anyone know what is going on to inform me, please ??
Click to expand...
Click to collapse
Mine is under update mode now approximate 145 updates including .net frameworks.
I am using Windows 7 Ultimate. Lets wait for the windows update wizard to get completed
Sent from my GT-N7000 using xda app-developers app
All looks good even after complete updates
Sent from my GT-N7000 using xda app-developers app
Hey people. Think you have seen a thread like this before? Well, that's because you have. But THIS thread is different! For two reasons:
1-It's written in GOOD English. No offense folks, but spell checking is really not that hard.
and
2-It deals with EVERYTHING you need to do to get Windows 7 retail up and running on the Shift.
If you see something that needs to be changed/corrected/updated then please feel free to let me know!
HOW-TO INSTALL WINDOWS 7 RETAIL VIA USB ON THE HTC SHIFT X9000 SERIES
Now, before we begin, this guide assumes a few things:
1-that you are using a RETAIL or RTM copy of Windows 7. This guide WILL NOT work with beta or RC versions of Windows 7 OR versions that are N-lited, stripped or altered in anyway. You MUST be using a retail image, either made from a disc you own or from other sources. Please note that we at XDA do not support piracy and suggest that you buy a legal copy of Windows.
2-That you are using a GSM version of the Shift, IE the X9500 or X9501. While these instructions will work with the CDMA version of the Shift, I personally do not have one so I cannot confirm if/how the CDMA radio works using this installation method.
3-That your version of Windows 7 ISN'T Home Basic. While Home Basic will work, it doesn't support touchscreens. I personally installed Ultimate, as the requirements are the same no matter what version you use.
To install you will need:
1-A Shift(duh!)
2-A copy of Windows 7 RTM or a retail disc
3-A USB drive that is 4GB or greater, but no larger than 32GB for Windows
4-A USB drive(any size really) for the storage of HTC drivers for post installation
5-Some time on your hands
6-Either another PC with a CD drive or a USB CD drive
Now onto the good stuff!
1-Let's begin. Insert your Windows 7 DVD into your CD drive. If you are using an ISO image, skip to step 4.
2-Make a folder on your desktop called Windows 7.
3-Copy ALL the files from your Windows 7 DVD into the folder you just made. Be patient as this process will take some time, especially if you are doing this on your Shift.
4-While the files are copying(or after they are done, whatever) go ahead and insert your USB drive into a free port.
5-Open "My Computer" and locate your USB drive. Right click on it and select "Format". Click the menu which says-"File System" and select "NTFS" from the options. Then click Format and let it finish. It should take just a few moments.
6-Once your USB drive has been formatted, open a command prompt and type the following command:
BOOTSECT.EXE /NT60 H:
Where "H" is your the letter of your USB drive.
7-Your USB drive should now be ready to use!
8-Insert your USB drive into your Shift's USB port, press the power button and repeatedly press F10 as it starts to be brought to the Boot Menu and select your USB drive and hit enter.
9-Windows should begin loading setup information now. It should take around 5-ish minutes to get to the graphical part of the installer.
10-When you are presented with the graphical portion, select your country and whatnot, then a username and such, and when it asks you if you want to Upgrade or Custom install, select Custom.
11-You will now need to format your Shift's harddrive. Select the partition that is displayed and select "Format". PLEASE NOTE THAT THIS WILL DELETE WINDOWS VISTA FROM YOUR SHIFT. YOU CANNOT RECOVER ANYTHING THAT IS DELETED. Your recovery partition however is not touched in anyway, so if Windows 7 doesn't work for you, you can reinstall the stock Vista from the recovery partition.
12-Once it is finished formatting, select that partition to install to and continue on with the installation.
13-When it finishes you SHOULD be presented with the Windows 7 desktop. And that's about it. No WiFi. No sound. Pretty much nothing. Now, you DID download the drivers and put them on another USB drive right? Right? GOOD!
14-Insert your USB drive and let Windows install it. Now, ALL of the drivers that we are about to install MUST be installed in the same fashion as I am about to describe. Right click each one and select properties. Click the compatability tab and select the option to have the installer run in compatibility mode for Windows Vista. This MUST be done or the drivers WILL NOT install.
15-Once you have done that, go ahead and install the following drivers. Don't worry about the other ones for right now. Install them IN THIS ORDER OR ELSE THEY WILL NOT WORK:
1-Vista Intel Chipset driver
2-Vista ECD
3-HTC Touchscreen
4-HTC ShagCTRL
5-Marvel SDIO WiFi
After you have installed those 4 drivers, restart your Shift.
16-Once your Shift has restarted, go ahead and press the Comm. Manager button. Shift Control Center should pop-up and your WiFi card should begin installing. If it doesn't, click on the button for WiFi and make it say "ON" and it should then start installing.
17-Once your WiFi card is succesfully installed, click Start->Windows Update.
18-Click on "Check for updates" on the left hand side and let Windows do it's thing. It should find 60-ish updates for download, around 6 of which are drivers for your various devices such as sound and Bluetooth and the like. Don't worry, your screen resolution WILL get better!
19-After Windows has installed updates..you are pretty much done! EVERYTHING should now be working in Windows 7!
20-ENJOY 3(!) HOURS OF STOCK BATTERY LIFE ON YOUR SHIFT RUNNING WINDOWS 7!
That's about it folks. I worked for 2 days straight to devise this method for installing Windows 7 on my Shift, and it couldn't work any better. If you find a mistake, or have a suggestion please let me know!
Great!
I´ll move it to [REF] Guides | Tutorials | FAQs | Stickies | Read here before posting thread located here:
http://forum.xda-developers.com/showthread.php?t=772017
it went fine till step 16, the Comm. Manager button doesnt open anything, however the wifi works ok.
please tell me how does the Comm. Manager work
and now it just wont boot, it gives a blue screen and tells me theres an error, and automatically shut down.
What error does it give you? Are you ABSOLUTELY SURE that you are using a GENUINE untouched OEM RTM copy? This process ONLY WORKS with the legal untouched OEM RTM. If you are trying this with some kinda downloaded ISO it WILL fail and bluescreen on you. It must be build 7600 or higher. Comm. Manager just works for me under 7 following these instructions.
Hi! Thank you for the guide, everything is fine! The only thing doesn't work is the touchscreen. I've installed the touchscreen drivers in compatibility mode Windows Vista SP2 and as Administrator. Do you have any idea?
EDIT: Solved! I reinstalled the driver for the 8th time and it worked!
I have seen the minimum requirement for running Windows 8 Consumer Preview as follows:
•1 GHz or faster processor
•1 GB RAM (32-bit) or 2 GB RAM (64-bit)
•16 GB available hard disk space (32-bit) or 20 GB (64-bit)
•DirectX 9 graphics device with WDDM 1.0 or higher driver
(http://blogs.msdn.com/b/b8/archive/...-consumer-preview-system-recommendations.aspx)
As far as I can see the biggest limitation is the 1 GHz processor as the Shift has a measly 800 Mhz clock speed. I dont know about the DirectX 9 graphics card.
Has anybody to install the latest Windows 8 Consumer Preview on the Shift. I happy with Windows 7 but if 8 is useable and performs better I would be happy to upgrade......
I just installed Windows 8 Consumer Preview and it seems to be much smoother and faster than Windows 7. Only problem is Metro apps need at least 1024x768 resolution to run. I also needed to replace ResolutionSwitchLauncher.exe (C:\Program Files\HTC\ResolutionSwitchLauncher.exe) with this:
http://forum.xda-developers.com/showthread.php?t=438768
because for some reason I couldn't install .net framework 3.5
JaWe said:
I just installed Windows 8 Consumer Preview and it seems to be much smoother and faster than Windows 7. Only problem is Metro apps need at least 1024x768 resolution to run. I also needed to replace ResolutionSwitchLauncher.exe (C:\Program Files\HTC\ResolutionSwitchLauncher.exe) with this:
http://forum.xda-developers.com/showthread.php?t=438768
because for some reason I couldn't install .net framework 3.5
Click to expand...
Click to collapse
Whaooh nice. Is everything else working nice and smooth. What about the resolution changer? Did you have to manually install the Windows 7 drivers like we did from Vista to 7. By the way can you upgrade the preview directly from 7 to 8 or it has to be a clean install.
Please consider doing a short write up/how to install 8 Consumer Preview.....
[GUIDE] Installing Windows 8 Preview on the HTC Shift
It can't be all that unsimilar to this installation guide, can it?
http://forum.xda-developers.com/showthread.php?t=1264742
Installed Win 8 Consumer Preview and it works like a charm
I have installed Win 8 Consumer Preview using the instructions posted on XDA for Developer preview and didnt face any issues.
Everything works smooth and it is much slicker and smoother than developer preview.
If you try updating directly from the microsoft site it downloads an installer file and it stops after it detects that the ****s processor is les than 1 GHz and asks you to upgarde it. The alternative to this is.
1. Down load the iso image onto your shift (make sure you are downloading the 32 bit one)
2. Extract the contents of the iso image using 7zip or Win Rar
3. Dont run the setup.exe on the root folder instead navigate to the folder named "sources".
4. Inside this file you will find a setup.exe file, just run it and you are done (ensure you are on mains power else the set up will get stopped at one point, also make a note of the Serial Key from the microsft site as you will as)
5. Select the option-2 (one which is at the bottom) after you run the setup.exe.
6. There will be couple of restarts and you are done.
7. As expected after complete installation you dont have the wifi and touch set up and you need to this manually. (just follow the steps exactly in the same sequence mentioned in the link in the post above this).
You are done and enjoy your HTC Shift with windows 8 consumer preview.
W8 on shift
I have W8 consumer preview installed on my Shift and everything is working.
-if you want metro apps, you must change the resolution (not good)
-sometimes it won't detect my SD card (maybe I have faulty one)
-if I restart or wake shift, wifi isn't working (must go to shagctrl and turn it off and on again, then it works)
-consumer preview is slower in start and a bit slower in use than developer preview
Got the consumer preview running. The default apps (mail,contacts.calendar)
are horrible Very sluggish and many options missing. Hope they improve.
On a side note : Cannot even find option to NOT USE SSL for exchange 2003 server.
It has potential though, the new tile based stuff is nice for our shift.
kruger.killer said:
I have W8 consumer preview installed on my Shift and everything is working.
-if you want metro apps, you must change the resolution (not good)
-sometimes it won't detect my SD card (maybe I have faulty one)
-if I restart or wake shift, wifi isn't working (must go to shagctrl and turn it off and on again, then it works)
-consumer preview is slower in start and a bit slower in use than developer preview
Click to expand...
Click to collapse
mine won't detect sd card as well
since marvel wifi on sdio, then it won't be detected also
If you've installed consumer preview, could you please post how you got wifi working? the marvel wifi device is found in windows 7, and the developers preview, but it's no where to be found on consumer preview, so no wifi or no consumer preview seem to be the only options I can find as of now.
dony71 said:
mine won't detect sd card as well
since marvel wifi on sdio, then it won't be detected also
Click to expand...
Click to collapse
I fixed the driver for sd, and wifi.
You need 2 files from the old releases, sdbus.sys and dumpsd.sys. You need to put them in this path: c:\windows\system32\drivers\
Files needed:
http://nasomi.com/sdbus.sys
http://nasomi.com/dumpsd.sys
To replace them in release preview, it's tricky.
1. Have them on an sd card from the old version, i'll upload them for those that want when I get a chance.
2. right click on desktop, new, shortcut. type cmd, click next, ok.
3. right click on the shortcut, hit run as administrator
4. type: takeown /f c:\windows\system32\drivers\sdbus.sys and hit enter
5. type: takeown /f c:\windows\system32\drivers\dumpsd.sys and hit enter
6: type: cacls c:\windows\system32\drivers\sdbus.sys /G jay:F <note that jay is my username and you will have to replace ONLY that portion with your login name.
8: type: cacls c:\windows\system32\drivers\dumpsd.sys /G jay:F <same as above, replace jay with your login
9. you should now be able to replace the old files when you drag them over and click overwrite/replace
10. restart.
Got Wifi to work, SD Card Still Code 10
jay6700 said:
I fixed the driver for sd, and wifi.
You need 2 files from the old releases, sdbus.sys and dumpsd.sys. You need to put them in this path: c:\windows\system32\drivers\
Files needed:
http://nasomi.com/sdbus.sys
http://nasomi.com/dumpsd.sys
To replace them in release preview, it's tricky.
1. Have them on an sd card from the old version, i'll upload them for those that want when I get a chance.
2. right click on desktop, new, shortcut. type cmd, click next, ok.
3. right click on the shortcut, hit run as administrator
4. type: takeown /f c:\windows\system32\drivers\sdbus.sys and hit enter
5. type: takeown /f c:\windows\system32\drivers\dumpsd.sys and hit enter
6: type: cacls c:\windows\system32\drivers\sdbus.sys /G jay:F <note that jay is my username and you will have to replace ONLY that portion with your login name.
8: type: cacls c:\windows\system32\drivers\dumpsd.sys /G jay:F <same as above, replace jay with your login
9. you should now be able to replace the old files when you drag them over and click overwrite/replace
10. restart.
Click to expand...
Click to collapse
Thanks !!!!!!!!!!
I got Wifi to work with your instructions. However, I still get code 10 on the SD Card in device manager.
I repeated the instructions twice.
The driver errors out, and has some text about SDSTORE.INF
JHope you can help, the Shift is now almost 100% functional !
thanks
yes, the wifi works upon copying two sys files following the useful instructions. only one problem: win8 is down while sd card inserted. thanks a lot for the wifi function. and if possible, any advice for sd card?
lucid said:
Thanks !!!!!!!!!!
I got Wifi to work with your instructions. However, I still get code 10 on the SD Card in device manager.
I repeated the instructions twice.
The driver errors out, and has some text about SDSTORE.INF
JHope you can help, the Shift is now almost 100% functional !
Click to expand...
Click to collapse
AT LAST, My WiFi WOKS, WORKS, WORKS
I have a HTC Shift x9500 (Clio 200). At last, after months searching, my wifi finally works too :victory:, and did it only changing sdbus.sys by an old version (I used the Windows 7 version). I was using an USB dongle, but no more. Like the others, the SD card doesn't work.
However, thank you very much for WiFi function.
Teclast X98 Air 3G Tablet: 9.7" 2048x1536 px - Z3736F - 3G - Android/Windows 8.1
Hi to everyone,
I would like to apologize because my english is not so good.
This thread could be usefull for to get informations and modding istructions about the tablet Teclast X98 Air 3G.
I'm waiting for delivery via dhl and i guess some of the user here could think that the air 3G is an interesting tablet considering dimensions, cpu, display and the dual OS support .
I would like to point out that given the architecture and hardware of this tablet since the Teclast has released firmware for Android (standard) and Windows 8.1 (still in beta), even though I opened the thread in the Android tablet could be open also a thread in the Windows 8 section.
It was necessary to open a new thread because following the thread on the x98 Air teclast someone has mistakenly flashed a firmware dell'X98 air thinking it would go well on the X98 air 3G.
These are the hardware specifications:
Brand Name: Teclast
Teclast Model: X98 Air 3G
Processor Model: Intel Bay Trail-T Z3736F
Processor Main Frequency: Quad Core, 64-bit, 2.16GHz
GPU: Intel HD Graphics GEN7
Memory Capacity: 2Gb DDR3L
Tablet Data Capacity: 32GB
Screen Size: 9.7"
Display resolution: 2048X1536
Screen Technology : IPS Retina 10 Point touch Capacitive Screen
Dimensions : 240mmx169mmx7.4mm
Camera (Front): 2MP
Second Camera (Back): 5MP
Net Weight: 498g
Network Communiction: Built-in 3G,Bluetooth,Wifi
Extend Port: 3G External,Earphone Jack,OTG,TF card,Mini HDMI
Supporting Language: English,Russian,Spanish,Swedish,Portuguese,Turkish,Italian,German,Chinese,French,Japanese,Polish,Ukrainian,Greek,Hebrew
Other Feature: GPS, G Sensor,Phone Call
Operating System: Android 4.4
Cell Capacity: 8500mAh
OFFICIAL LINK
http://www.teclast.com/zhuanti/X98Air3GWin8/
SOME REVIEWS
http://mikecanex.wordpress.com/2014/09/18/teclast-x98-air-3g-gets-a-review/
http://translate.google.com/transla...s.imp3.net/thread-11183835-1-1.html&sandbox=1
http://bbs.teclast.com/thread-253051-1-1.html (you must be registered)
VIDEOS
Dual boot: www.youtube.com/watch?v=29dtAF39R9c
Dual boot conversion (with some usefull files): https://www.youtube.com/watch?v=qxpU_hFup64
Win 8.1: http://www.youtube.com/watch?v=Q3e_KTfbSK0
Win 8.1 - Multitasking and desktop mode: http://www.youtube.com/watch?feature=player_embedded&v=YHNki9ZBRgQ
Win 8.1 Gaming - Team Fortress 2:http://www.youtube.com/watch?feature=player_embedded&v=V8SpGjc3H4Y
Win 8.1 Gaming - Counter Strike Global Offensive: http://www.youtube.com/watch?v=rvwIxm2mCZw
Win 8.1 Gaming - Asphalt 8 (1366 x 768): http://www.youtube.com/watch?feature=player_embedded&v=qrJAGQ9iEYE
USEFUL TOOLS
VRoot : http://www.mgyun.com/vroot
VRoot chinese version (recommended) : http://d-h.st/lWu (Thanks to SUMMERBREEZE)
SRSroot: http://j.gs/4cyJ
Create ISO with driver : http://www.wincert.net/forum/files/file/5-win-toolkit/
Create bootable USB pen drive : http://rufus.akeo.ie/?locale=it_IT
REPOSITORIES WITH MANY THINGS (thanks to Frontiers and Hendrickson)
http://d-h.st/users/Frontier?fld_id=40727&s=file_size&d=DESC
http://techtablets.com/teclast-x98-air-3g/downloads/
BENCHMARKS
http://www.futuremark.com/hardware/mobile/Teclast+X98+Air+3G/review
OPEN A TECLAST TABLET (thanks to supercowz)
https://www.youtube.com/watch?v=841pMJC_QOk
ENGLISH REVIEW (thanks to Hendrickson)
techtablets.com review
ITALIANS REVIEW AND TUTORIALS (thanks to topdigamma.it)
Topdigamma.it Review
POSSIBILITIES FOR RECHARGE (thanks to cvfancypants)
Included Chinese Charger (TP-U25)- 5.0V/2.5A + Included USB cable
Belkin Boost Up (F8J040kr)- 5.0V/2.4A + Included USB cable
Samsung Charger (EP-TA11KWK)- 5.3V/2.0A (attached USB cable)
ANDROID DEVELOPMENT
Disclaimer : these proceedings or files are provided "as are" and i'm not responsible for any lost (hardware / software )
I would also like to point out that these procedures have been tested for the model C6J6
ROOT INSTRUCTIONS WITH VROOT (thanks to zackman)
http://androidxda.com/download-vroot
VIDEOTUTORIAL VROOT USE
https://www.youtube.com/watch?v=cRgHZSnLmus
Note: someone has done the root through Vroot (english version) only after using Kingroot http://www.kingroot.net/
VIDEOTUTORIAL SRSROOT USE
https://www.youtube.com/watch?v=cRgHZSnLmus
FIRMWARE ANDROID
Teclast: http://dl.vmall.com/c0jpmqz7r5 (passw:C6J6)
Intel: https://01.org/android-ia/downloads
ADB DRIVER
https://mega.co.nz/#!3JshGCLB!6ldn4tPJZlZtDvlR17pmxhqxkrDs4OxxyCJhIHyhZ-4
http://www.koushikdutta.com/post/universal-adb-driver
FRONTIERS X98 TOOLBOX (for easy rooting)
https://www.oboom.com/MCY35B1Z
Just extract it and run "1_Toolbox.bat".
The rest is self explanatory.
If you have some difficulties you can follow these istructions: 25gee's tutorial
TOOLBOX WITH SU - updated to 2.43 - now root works without any problem if someone needs it
https://mega.co.nz/#!Mp50gIoD!ErMC5F...f9Qff_FQY0apcw
ALL THE APKS COMES IN /system/app STOCK ROM (thanks to migui88)
https://mega.co.nz/#!wYBixJaR!U6hO52KW0Wg_hy8OC8OBXP7ATmdpXmMWZNq9mHP2hMQ
ANDROID ROMS
CHINESE LITE 4.4.4 ROM (without bloatware and with lollipop keyboards)
https://mega.co.nz/#!KI8T0bBb!Pv25K1Rh0MJvXSCYQEC8P8l1mbsZQRgG6q5-XezP_aI
SUPERCOWZ X98 Air 3G (C8J7)-Android4.4.4-V2.00-1CF3.rar 556.1 Mb
https://mega.co.nz/#!zVdgWJyS!Vh7zGqX6NcYgXrCf-5v_qmEReZXuicvGzw6h1u5OnGo
jcespi2005 LIte ROM
v2.0 - C6J6 (Based on 2.01 Stock)
https://mega.co.nz/#!oQFU1CbR!NgwcEag4D1fuiVyS5qklyGq2wvMuPfwAwvHmFYzS4r4
v1.0 - C8J7 (Based on 2.02 Stock)
https://mega.co.nz/#!QY9kUQCI!hsPc8259qi0TmJhRmnc42inPEhFmpw-75fYxqrons6k
Description:
Fully rooted (Just launch SuperSU and update binary)
Deodexed
Zipaligned
Chinese Apps deleted (system should boot EN locale)
Nova Launcher as default Launcher (and the only one)
Google Play Fixed (integrated on System partition)
Audio fix by Frontier
Viper4Android
TeclastAutoUpdate (Just in case)
ES File Explorer
Three XML, one stock, one for 1Gb System, 128Mb Cache and 5Gb Data (for Dual Boot) and the other one to flash SYSTEM partition
mirek190 rom v3.1
v3.0 - C6J6
https://mega.co.nz/#!41IQHCDZ!g09l4U...A-30nY3DybSl2g
https://drive.google.com/file/d/0B8B...ew?usp=sharing
v3.1 - C8J7
https://mega.co.nz/#!8s4j0DZS!G6d9Ft...PI6fojDtwprLnM
https://drive.google.com/file/d/0B8B...ew?usp=sharing
v3.1 - C9J7
https://mega.co.nz/#!Yo4i0KJD!dnSXlt...jSH13iHvoHyc0o
https://drive.google.com/file/d/0B8B...ew?usp=sharing
Description:
ability to flash only system ( data and partitions are not touched ) or full flash.
system partition 1 GB instead of 1.5 GB -default but you can change it.
cache 100 MB instead of 1000 MB - is completely enough I tested but you can change it.
data partition 27 GB instead of 25 GB - I added other partition tables for data like 1 , 2, 3, 4, 5 ,6 ,7 ,8 ,9 , 10 GB , only android ( 27 GB ) , only windows 27 GB as well ) or default.
fully rooted
removed all Chinese programs
busy box
init.t
zip alignment
deodexed
changed navigation buttons to Android L looks
resided navigation bar
removed vol buttons and screenshot button from navigation bar - screenshot you can make pressing vol - and power at the same time.
battery with percent
bold fonts on system bar - fonts looks better
lower min brightens
microphone gain fix
clock on the middle of the status bar
4 way power menu - ability boot to droidboot, CWM, Hotboot
some changes in Buildprop for performance.
some optimizations in Framework but still very simple.
added. Google services, Google play, YouTube
google keyboard
adblock ( need root )
resolution changer ( need root )
ViPER4Android FX - need root now sound is really good and noisy
Apex launcher
and other things he don't remember
WINDOWS 8.1 => ANDROID PROCEDURE (thanks to Frontier)
Required materials:
- A Teclast X98 Air 3G (obviously), battery sufficiently charged (recommended to be fully charged the battery before starting the process). The tablet will be running Windows 8.1 or in FastBoot mode
- The Android DnX BIOS (or Android BIOS) from here
- Tin last available (this season) Android ROM for the X98 Air 3G: X98_Air3G_(C6J6)-Android4.4.2-V1.10.7z
-The tools of the platform upgrade Intel (Intel Manufacturing Tools). These are available in two versions, the newer and older . Start with the newest and if do not work on your computer, install the older version. Only one version must be installed on your computer.
Upgrade Preparation tool (Intel Manufacturing Tools)
- Unzip the computer you use to convert (not tablet), the Android ROM given above.
- Unzip one of the two available sets of tools Intel Manufacturing Tools. Inside the folder, you will find some executables that run in the following order and always with administrator privileges:
iSocUSB-Driver-Setup-xxxexe: At some point during the installation, you will know that you have to connect the X98 with USB cable to the computer to install the NAND drivers. H connection is necessary otherwise you can install to see and shape the NAND memory of tablet.
IntelAndroidDrvSetupx.xxexe: We run this installer as an administrator with the tablet plugged in USB. This will install the ADB driver Intel, which appears in the Device Manager (Device Manager) for Windows. (See the picture Figure_1)
ManufacturingFlashTool_Setup_x.xxexe: This tool is used in the final planning "name" (branding) of the tablet and install the fastboot kernel. Install with administrator rights on the proposed application folder (hold down the name of the file for the next step).
- Upon completion of the installation of the Intel Manufacturing Tool, copy the file "CUSTOM_CONFIG.INI" into the folder that the tool was installed (the default is C: \ Program Files \ Intel \ Manufacturing Flash Tool).
The function is said to be installed and functional guest running on X98 Air 3G, host.
Once the installation of the guest operating, it becomes host to the tablet and just run it.
Not supported - for now - the simultaneous execution of Android & Windows.
Remove the microSD card that you probably have the tablet, before initiation.
From Windows host -> Android guest (conversion to Android tablet)
- Unzip the Android DnX BIOS directly into the Windows installation on X98 Air 3G.
- Run with administrative rights (from command line) flash.bat file inside the folder BIOS_X98_Air_3G_android. H process starts with the completion of the installation DnX BIOS displays the message "FPT Operation Passed".
- Turn off the tablet holding the POWER button for 10 seconds.
- Run Intel Manufacturing Tool as administrator.
- On the tablet, hold the VOL +, VOL- and POWER until you see the logo of the Teclast. The tablet will be "stuck" there, is perfectly normal. Connect the tablet to the USB port on your computer, so you will receive the following message: "Entering DnX mode. Waiting for fastboot command..."
- In the Device Manager of Windows (Device Manager), find the Android ADB Interface and right-click -> Properties (Properties). In the window that appears, go to the Details (Details) and there in the drop-down menu choose the Hardware ID (Hardware IDs). Our interest rates VID and PID, as shown in the picture Figure_2.
Transfer the VID and PID values in the respective fields of Manufacturing Tool, section SoC Devices.
- Disables the tablet holding the POWER button for 10 seconds and disconnect the USB.
- We keep the tablet down the VOL- and POWER to enter the mode droidboot. Once this happens, connect the USB cable again, go to the Device Manager Windows (Device Manager) and - as before - we find the values of the PID & VID Android ADB Interface (values are different from the previous Figure_3
Transfer prices PID & VID Manufacturing Tool in their respective fields of unity "Android devices", so o Dialogue Manufacturing Tool will be something like shown in the picture. Press "Apply" and "OK" to save the parameters. Close the application.
- Disconnect the USB cable from the tablet and disable.
- Xanatrechoume the Intel Manufacturing Tool as managers and go to the menu File -> Open. There, choose the folder of ROM (X98_Air_3G_ (C6J6)), find the file "flash.xml" and open it.
- We keep the tablet down the VOL +, VOL- and POWER in order to display the logo of running Teclast DnX, connect the USB cable and Intel Manufacturing Tool begins the process of flashing Android ROM. Wait until the process is complete, disconnect the tablet from the USB and disable the X98 Air 3G.
The conversion process in Android tablet has been completed.
3D GAMES FREEZES FIX (thanks to Akitoyo and acc007)You can download the patch from here: patch for 3D games freezes
Then follow these steps:
1. Copy the update.zip to the root path of internal storage
2. Click OTA icon, then choose local update
3. Choose update.zip file then apply it, system will reboot automatically
4. There will be a new icon "Fastmode" on the desktop, choose it before launching large 3D games.
You must click it again if you reboot the tablet then play 3D games
If you haven't Teclast OTA app you can download it from here: Teclast update tool
If you want can find the apk attached to this post (fastmode.apk).
If you don't want use apk, use adb shell and then su to become root.Then launch these commands:
Code:
echo 400 >/sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt_min_freq_mhz
echo 400 >/sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt_max_freq_mhz
If you want a persistent fix, also after reboot you can create new file install-recovery-2.sh file and put it in ./etc folder with these istructions:
Code:
#!/system/bin/sh
echo 400 >/sys/class/drm/card0/gt_min_freq_mhz
echo 400 >/sys/class/drm/card0/gt_max_freq_mhz
Remember remount /system as rw and chmod this neely created file to 755. You can then execute it or restart to have it automatically started.
For more detailed tutorial look here : jcespi2005's tutorial
GOOGLE PLAY STORE FIX (thanks to Frontier and Hendrickson)Anyone having issues with Google Play Store - this applies to both Air 3G with the latest 2.0.1 update (will post more information later) and Air II - please apply this fix.
Your OS should be rooted in order for this to work.
- Download the files from here.
- Follow this Hendrickson's Videotutorial
TECLAST X98 AIR 3G ANDROID KITKAT 4.4.4 ROM(OFFICIAL) v2.0.0 (thanks to Frontier)Download the upgrade from here.
You also need the Intel Manufacturing Tools (get them from here).
After installing this ROM upgrade, you need to apply the Google Play store fix (links and instructions just above).
The procedure to install this ROM is described above in this post. Just ignore the part that describes how to flash the Android BIOS to the tablet, as it is not needed in this case.
This upgrade will erase all data in the internal flash storage (32GB), so make sure you have a recent backup for your applications.
This ROM is OTA safe, after installation the Teclast Software Updater will notify you for an updated ROM; install the update (it's quite small) so the final ROM version would be v2.0.1_20141505 (see Teclast_X98_Air_3G_Android_4_4_4.png).
Visible changes:
- Intel Firmware Updater Tool inside the Android system; you can use it to flash .bin files directly to the tablet within Android (dual-boot system).
- Google Play Store enhancements; I can install applications now that I couldn't with 4.4.2 release (e.g Google+, Paypal and various e-Banking apps).
- A (little) faster boot.
MICROPHONE GAIN FIX FOR ANDROID 4.4.4 (thanks to Frontier)Here is the final version of the microphone gain fix.
Tests done:
- Voice recognition using Google Now and Google voice typing (even in Greek) works as good as on my OnePlus One with CM11s 44R
- GSM/3G voice calls are clear (I am using Wind GSM network) both with the built-in microphone and via Bluetooth headset (Samsung WEP210).
- Skype voice/video calls are clear, both with internal microphone and the Bluetooth headset.
Connect the tablet with USB cable to a PC with android debug bridge installed.
The tablet needs to have USB debugging enabled.
Open shell and cd to the location of new audio configuration file.
On a PC shell write:
adb root
adb remount
adb push AudioConfigurableDomains.xml /system/etc/parameter-framework/Settings/Audio
adb shell
In the adb shell write:
cd /system/etc/parameter-framework/Settings/Audio
chmod 644 AudioConfigurableDomains.xml
reboot
Done !
XPOSED ON 4.4.4 (thanks to majkel_94)Ok guys, thanks to @jcespi2005 for Xposed ASUS mod which steer me to the correct solution in xda topic for Xposed
So here it is:
Downolad Xposed Installer (2.6.1 has been tested, modules working ok), install it but don't launch the app or install framework.
Download Root Browser, install and open it.
In root browser:
go to the /data/data/de.robv.android.xposed.installer/ and create folder "conf" (permissions rwxrwxrwx)
in folder "conf" create the file "jit_reset_offset" (permissions rw-r--r--)
Download Terminal Emulator, install and open it. Then:
type "su"
type "echo 0x98 > /data/data/de.robv.android.xposed.installer/conf/jit_reset_offset"
Reboot the tablet.
Open Xposed Installer, install framework, reboot.
Profit! You have working the latest Xposed and working KK Gravitybox!
Remember: You can disable xposed at boot by repeatedly pushing a hardware button as the tablet begins to boot. For example you can use Vol + button.
HOW TO UNPACK AND PACK framework-res.apk CORRECTLY (thanks to mirek190)Follow these instructions. mirek190's tutorial
ITALIAN TUTORIAL FOR UPDATE TO STOCK ROM FROM CUSTOM SELLER ROM (thanks to topdigamma.it)topdigamma.it Tutorial
DUAL BOOT FAQ + HARDWARE AND LOW LEVEL FIXING
FAQ
1)Q: While in Intel Manufacturing Tools and trying to flash, the progress bar is stuck at X%
The flash tool does not like funny characters ,should clear up some confusion as to why things aren't working.So before to flash please try removing the chinese characters from the file name. It screwed you up on something else having chinese in the name.
At 0%: Well, reconnect your device again, check your VID and PID values in settings, check if your drivers are properly installed, replace a cable if it is faulty, check that you're in DNX mode, basically, the flashing didn't even start.
If you have the right pid/vid from the device manager,unplug the device, close the app and restart it, select the flash.xml (should say ready to flash) then plug the device in while in DnX mode and it should begin.
At 5%: Mostly due to the fact that "Custom_config.ini" was not copied to the IMT directory, or there are some other programs that is blocking the progress, try changing a computer and flash again.
At 10 or 11%: Mostly due to wrong settings or parameters, check Device Manager in Windows for any missing drivers, check that the downloaded ROM is not damaged, or that the tablet is not already bricked. Also, this software is very sensitive to the USB port that it was first installed on, so try plugging it back to the same USB port that you plugged it during the install process. (Yes, you have to plug the device in during the install process, if you missed this out, uninstall all the drivers and redo the installation properly).Sometime help to try a different ROM, just to clarify you have copied the "custom_config" file to the Intel Manufacturer Tool folder right. It should get to 10% for about 5-10 seconds then make a disconnection sound and suddenly jump to 15% and continue.
At 89 or 90%: The files written at this stage are larger, so it might take a while longer, but if it is really stuck here, probably the USB cable is faulty. Replacing a cable and flashing again should solve the problem, or just simply leave the tablet and cables still (do not move them around) and try again.
If the flash freezes at 90% a solution could to be increase the timeout values in the program facturing flash tool.
At any other points: Might be due to faulty cables, or simply just try again!
2) Q: I flashed android bios, now I can not get in to droidboot mode by pressing Vol + and POWER. The tablet always gets into EFI shell command interface. I can only get to DnX mode by pressing VOL+ , VOL- and POWER. Any solutions?
A: Follow this steps valid for C6J6 and C8J7 model :
Open Intel manufacturing tools,then open file menu and go to the settings.
Put this value to SoC Devices: VID: 8087 PID:0A65
Put this value to Androird Device: VID: 8087 PID: 09EF
Click on apply and then on ok.
Disconnect the USB cable from the tablet and turn off your tablet (important)
Download the Android 4.4.4 ROM for C6J6 and C8J7 by supercows (link above)
Then in Intel Manufacturing Tool and go to the menu File -> Open. There, choose the folder of X98 Air 3G (C8J7.C6J6) lite 4Gb or 8GB and choice "flash.xml" for your device 4Gb or 8GB and open it.
Keep pressed VOL +, VOL- and POWER button until the tablet go to the dnx mode
Connect the USB cable and Intel Manufacturing Tool begins the process of flashing Android ROM.
Wait until the process is complete.
Disconnect the tablet from the USB and and turn off your tablet .
Connect the usb keyboard to the tablet and turn on your tablet, you could get shell command error again
Just type exit and you see the tablet go to the android version
When go to the android you must change your bios with ifwiupdate and you can flash dualboot bios or new android bios from first post
3) Q: I have problems getting into Android from the dual boot menu! Windows is okay.
A: If there are any problems getting into Android from the dual boot menu, change this option in the BIOS. Change "Boot Architecture" to "OS Boot Menu Only".
View attachment 3048901
4) Q: After shutting down the table in Windows, it takes very long before I can power it on again.
A: Turn off "Fast Startup" option in Windows Power Options. Another way is to navigate to "C:\Windows\System32", find "SlidetoShutDown.exe" and use that to shut down.
5) Q: The time in Android and Windows is not synchronised!
A: Go to "Run", type in "regedit", then navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation
Add in a new REG_DWORD, "RealTimeIsUniversal" and set its value to 1
6) Q: I plugged the tablet into the charger and it shows as charging but after a while I noticed that the battery percentage dropped!
A: Check the cable, it should be of good quality and as short as possible. Original teclast cable is good, not too long and thick enough. Best to use short cable of 5cm. This is due to high current and low voltage of the tablet.
7) Q: I'm on Android 4.4.2 and this tutorial needs me to upgrade to 4.4.4. How
A: Go to post #2, download the 4.4.4 ROM from there, start by following the tutorial from the line "WINDOWS 8.1 => ANDROID PROCEDURE (thanks to Frontier)" onwards all the way until you reach GOOGLE PLAY STORE FIX (thanks to Frontier). If you see the line "From Windows host -> Android guest (conversion to Android tablet)" in the tutorial, do not worry, because this process is used for both purposes, from Android to Android or Windows to Android, both are applicable.
8) Q: I flashed my tablet to dual boot OS already, but now I want to reinstall only one OS! How can I do it without having to reinstall everything?
A: If you want to reinstall Android only (leaving Windows unharmed):
One way is to flash just "system.img" through the Intel Manufacturing Tools (try this way first).
Download from here the zip named "ONLY FLASH system.img": http://1drv.ms/1s8dci8
Replace the "flash.xml" in your ROM folder with the one in this version.
Then flash as per normal using IMT.
This "flash.xml" will instruct the IMT to flash only the "system.img" file which is Android OS.
If that doesn't work, we will try flashing all components of the ROM without re-partitioning the whole eMMC,
Download from here the zip named "ONLY FLASH ANDROID PARTITIONS": http://1drv.ms/1s8dci8
Replace the "flash.xml" in your ROM folder with the one in this version.
Then flash as per normal using IMT.
If you want to reinstall Windows only (leaving Android unharmed):
Prepare your USB Drive with the Windows image.
Boot into Windows first, then restart and plug in the OTG cable, USB HUB, keyboard, and USB Drive.
Enter BIOS by pressing "ESC" key during boot and under the "Save and Exit" menu, scroll down to the "Boot Override" option, find the USB drive and select it to boot from it. The BIOS restart the tablet and will boot into the USB Drive so Windows install should start.
Remember the USB bootable stick must be created with Fat32 file system and GPT table partitioning.
9) Q: Help! My touchscreen is inverted!
A: (Thanks to @krisbliz):
Download the files from @krisbliz post here, and copy the files into C:\Windows
now run gpedit.msc
computer configuration
scripts (startup/shutdown)
startup
add
browse for reset driver.bat
10) Q: How to reinstall windows without reinstall android ? I cannot change the language and even updates from winddows update,every time when I put usb prepared and trying to install windows it working installation and after 65% shows installation error 0xc1440137 0x2000c and going back to previous instal (chinese) to windows
A: (Thanks to @mohamad_skiller):
Connect usb keyboard and usb windows instalition to your hub then
Enter BIOS by pressing "ESC" key during boot and under the "Save and Exit" menu, scroll down to the "Boot Override" option, find the USB drive and select it to boot from it.
The BIOS will boot into the USB Drive and Windows install should start.
11) Q: I have installed dualboot bios with a success. When I plug in usb to install the IntelAndroidDrvSetup1.5.0.exe, in the boot menu I can see a Windows in the right center of screen and in the right top corner two small icons of android and windows which I can check. I dont see Android logo in the center of screen?
A: (Thanks to @jcespi2005):
Sounds you install windows on top of android partitions.So check what partitions do you have in windows partition manager...If you deleted the android ones, you'll need to start over starting installing android again.
In any case, make sure you've followed these steps correctly:
blackman818's tutorial
12) Q: Why Microsoft Store doesnt work?
A: (Thanks to @Hendrickson ):
Run the troubleshooter (Search and type trouble shooter) And run it for the Store, this should re-install the drivers
13) Q: Why camera doesnt shows anything (the screen turns black and i have to exit to desktop)?
A: (Thanks to @Hendrickson ):
Reinstall the camera.inf and OV and GS camera drivers from the Air 3G drivers
14) Q: I can't use touchsceen and also screen rotation is not working. During installation , Windows stopped at language selection ,i had to connect usb moude and keyboard to make selection, is this normal?
A: (Thanks to @25gee ):
Yes,continue the installation and use drivers zip on the first page.Install the driver under gyroscope and run the registry file.Go into device manager,find the unknown device,install drivers and point manually to the drivers folder (it will install but fail to enable,this is normal) from here simply right click on the display,disable it and reenable, you can do the same with the 2 I/O devices for the orientation and accelerometer to fix the inverted screen rotation
15) Q: I partitioned my 32 GB SD card and formatted the smaller partition EXT4. Link2SD recognized the partition but it "fails to create MOUNT SCRIPT.
A: (Thanks to @kinhvanhoa ):
Probably you forgot to format your EXT4 partition on the SD CARD as "PRIMARY PARTITION."
Please make sure the EXT4 Partition which should be smaller than FAT32 partition, must be set as "PRIMARY" (FAT 32 as well).
Then, use LINK2SD on the Rooted Android, it works fine and allows apps to be moved to the EXT4 partition on the SD card.
16) Q: How can i change the intel turbo mode on to off? How can i enter in the bios mode? Only few games works, others freeze!.
A: (Thanks to @SUMMERBREEZE ):
Find an USB keyboard first and plug OTG cable to the tablet and turn it off. Turn the tablet on and immediately press ESC button. And follow the images (bios_1 and bios_2) i attached and do the settings carefuly. f4 save & exit
17) Q: I have problem with the dual boot bios, now I don't arrive any more to the page where there are the icons of the Android and Window (that I never saw it). Please could anybody known what happens, I am stacked on the installation of windows?
A: (Thanks to @grigoris_a ):
From switched off press power button once to boot and keep holding vol up key pressed
18) Q: I have installed dualboot bios with a success. The icon of windows is not showed,why?
A: (Thanks to @grigoris_a):
If you don't see windows icon it means the USB is not bootable.Try getting into bios and see if the USB drive is detected and check the file system on your windows usb drive it should be FAT32. Often the problem is inside the bios, maybe is enabled the options the EFI format on the boot option, disabled it the icon of windows appears and then you can started the installation.
18) Q: I start from Windows 8.1 then I installed the Dual Boot Bios (No problem).
I restart to the bios, power down the tablet and power up again and use the Windows 8.1 again (without reinstall anything) with 60hz. Everything perfect but... right now I cant install android because my tablet is not recognize by the PC I power off by pressing 10 seconds the power button. Then while its connected I power it up and shows the battery meter but the PC dont do anything so I cant use any program to flash android, any idea? I tried different cables and nothing
A: (Thanks to @Petepe10):
This is the normal way, do not know about dualboot though: Power up (vol up down power press) until screen shows dnx mode, and then connect cable. Flash starts automatically (provided pc is ready to flash of course)
19) Q: How to switch from an OS to another?
A: (Thanks to @BPM):
Power off the device and then press and hold vol+ and power until you see the bootmenu
20) Q: On the lockscreen in Windows the text in the lower right corner is chinese.
Sometimes there pops up chinese messages in the infobar (lower right corner in windows - left to the clock).How can i remove this?
A: (Thanks to @smartchip):
On Control panel : Clock, Language and Region : Language : Change date, time or number formats. On Formats tab - Match Windows display language (should be default). On Location tab - change "Home location" to get your Start Menu tiles to load news, recipes, etc from your country (open the apps when you're done and refresh). On Administrative tab - "Welcome screen and new user accounts" click "Copy settings", apply to all.
21) Q: I have teclast x98 air 3g dualboot version but accidentaly i touch in corner to swich off choosing the system, now i have only android.How ca I return to dual boot menu?
A: (Thanks to @smartchip):
Hold power + volume up to power on. You'll get the menu back
22) Q: On Windows is there any way to hibernate the tablet? I try to hibernate but doesnt works well,the tablets power off but you have to press power button for 10s to power it up again, and you start windows normally?
A: (Thanks to @seba2000):
Make a shortcut on your desktop to C:\Windows\System32\rundll32.exe PowrProf.dll, SetSuspendState Hibernate
and save it as "Hibernate" for instance.You can pin it to start as well.When you will run this shurtcut tablet will hibernate. Remember that after you will run this command (shortcut) you need to wait a bit before you will be able to switch on again (10-15 sec) . Do not try to switch on immediately - Windows needs time to dump all data from RAM to hard disk (need time to hibernate). In this tablet there is missing any led which show disk activity so you just need be patient.
After 10-15 sec you will be able to switch on by single power button press.
If you want add hibernate and sleep option in Windows, follow the vpx tutorial
23) Q:Why there is one hour difference between android and windows ?
A: (Thanks to @G3n3R4L):
Hit Start and type regedit.exe in the search box. Hit Enter and navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\TimeZoneInformation. Right click anywhere in the right pane and hit New > DWORD (32-bit) Value. Name it RealTimeIsUniversal, then double click on it and give it a value of 1.
and done, time in windows is exactly the same as android under the correct time zone.
If you want to do these steps automatically you can use this reg file: abanglek's X98DualClockFix.zip
25) Q:Windows only reporting 1 battery cell, battery gets stuck at 7% for a few hours as mentioned previously here. Did anyone manage to fix the issue in Windows?
A: (Thanks to @grigoris_a):
1.Fully charge the tablet
2 Run cmd as admin and paste this command
powercfg-setdcvalueindex SCHEME_CURRENT SUB_BATTERY BATACTIONCRIT 0
3 Use the tablet until it shuts down
4 Charge the tablet without pushing power button until it charges fully.(let it overnight)
24) Q:Why I can't enter in fastboot mode?
A: (Thanks to @jcespi2005):
Just power off (press power off for 10 seconds), wait some time, 5 minutes, and press VOL+ VOL- and then power on until fastmode shows on the tablet. When you connect the tablet on fastmode, the Manufacturing tool just boot a droidmode image like this:
01/14/15 00:14:29.870 INFO : Port 0/0/4 #0: Booting droidboot image - SN : Baytrail00005B06
01/14/15 00:14:32.914 INFO : Port 0/0/4 #0: Booting to droidboot.img success - SN : Baytrail00005B06
25) Q: The brightness auto dimming up and down by itself. But This tablet no light sensor and cannot enable/disabled auto brightness.
A: (Thanks to @melvincz):
Go to the Intel Graphics settings utility (find it in the tray), choose Power section and disable all energy savings functionality. That will fix the auto-dimming issue.
That's all! ENJOY! If there are any questions feel free to post in the forum. Thanks!
HARDWARE AND LOW LEVEL FIXING
FLASH BIOS WITH THE USB PROGRAMMER AND CLIP (thanks to Hendrickson)
You can follow the tutorial here:
Russian Tutorial
The clip took a few goes to connect and it finally do when you hear the windows beep beep that new hardware is detected. Flashed and verified and boots fine. Windows 8.1 installed the drivers itself. You don't need to install them.
Some tips, I did it with the battery connected and fully charged. I used the 25xx slot on the usb programmer and the clip #1 is the colored cable of the 8. #1 on the clip to the . connector on the winbond chip itself.
Flashing took around a minute its quick.
DISPLAY BRIGHTNESS THROTTLING (thanks to Petepe10)
I think I found a way to prevent that the display is heavily dimmed due to a thermal event. It is in thermal_throttle_config.xml in system/etc. My interpretation is that by the mod below the brightness reduction is not immediately to 40 percent but goes down in steps to 80 60 40. Wouldn't you agree? I have not found the trigger settings yet though. The xml is editable (I use total commander), reboot afterwards. I will test some more. Of course such thermal mods are not without risk, so be warned..
Code:
<!--Cooling Devices-->
<ContributingDeviceInfo>
<CDeviceName>Display</CDeviceName>
<CDeviceID>1</CDeviceID>
<CDeviceClassPath>com.android.server.thermal.Brigh tnessControl</CDeviceClassPath>
<CDeviceThrottlePath>none</CDeviceThrottlePath>
<ThrottleValues>
<!--ThrottleNormal>100</ThrottleNormal-->
<!--ThrottleWarning>40</ThrottleWarning-->
<!--ThrottleAlert>40</ThrottleAlert-->
<!--ThrottleCritical>40</ThrottleCritical-->
<ThrottleNormal>100</ThrottleNormal>
<ThrottleWarning>80</ThrottleWarning>
<ThrottleAlert>60</ThrottleAlert>
<ThrottleCritical>40</ThrottleCritical>
</ThrottleValues>
</ContributingDeviceInfo>
FIX EMMC (thanks to stachoo777)
You can follow the tutorial here:
stachoo777 Tutorial
Be aware of broken droidboot mode when updating to newest ifwi bios for c6j6. One hint for this is that efi shell is like dos so if you want to go to USB just type "fs1:"
FIX PROBLEMS OF HEAT DISSIPATION (thanks to acc007)
acc007 Tutorial
FIX HEADSET PROBLEM(thanks to Hendrickson )
If with music, it sounds like it's being played through a tunnel, or been compressed down to something like 8kbps. The main instrument tracks usually sound fine, but the vocal track is heavily muted and in some tracks practically inaudible; it's also tinny and a bit distorted.
It's not defective, it's a Iphone style jack, if you don't fully insert your 3.5 plug it will sound normal. Or use a headphone without a mic or a converter like this one: http://www.ebay.com/itm/301385140519?_trksid=p2060778.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
WINDOWS DEVELOPMENT
Disclaimer : these proceedings or files are provided "as are" and i'm not responsible for any lost (hardware / software )
I would also like to point out that these procedures have been tested for the model C6J6
WINDOWS 8.1 PRO ISO
http://getintopc.com/softwares/operating-systems/windows-8-1-download/
WINDOWS 8.1 WITH BING (Teclast beta version - no driver nedeed)
https://drive.google.com/folderview...&usp=sharing&tid=0BzgIeN_XB6mlUmFieDdxa3JkUHc
WINDOWS 8.1 LANGUAGE PACK
https://social.technet.microsoft.co...uage-pack-for-windows-81?forum=w8itprogeneral
WINDOWS 8/8.1 TECLAST COMPONENTS DRIVER
https://mega.co.nz/#!tJdHCIAT!agSun8Wa1tOx_3tL8YMuS19j1i5wWG2WUJPprmTbTCs
ADB DRIVER
https://mega.co.nz/#!3JshGCLB!6ldn4tPJZlZtDvlR17pmxhqxkrDs4OxxyCJhIHyhZ-4
Note: The camera driver not work correctlly on Windows 8.1, after OS installation it's necessary to install ManyCam Pro to get a satisfactory use of the camera
ANDROID => WINDOWS 8.1 PROCEDURE (thanks to Frontier)
Required materials:
- A USB stick of 256MB (generally small), FAT32 configuration with label (label) WINPE (uppercase).
- A USB stick capacity of at least 8GB, formatted system NTFS. This will pass the installation files Windows 8.1.
- A USB hub to connect these two sticks in OTG cable X98 Air 3G. The hub would be good to have its own power supply.
- A Teclast X98 Air 3G (obviously), battery sufficiently charged (recommended to be fully charged the battery before you start the process).
Preparing USB sticks:
- Unzip the file WinPE_User_20140814.7z and copy all files directly on the root directory of the USB stick WINPE. See the picture Figure_1.
- Unzip the installation files for Windows 8.1 DVD into a folder named "images", which should be on the root directory of the USB stick of 8GB (with NTFS configuration). The Windows 8.1 version with Bing for X98 Air 3G is here (5 files total): Part1 , Part2 , Part3 , Part4 , Part5 . Inside the folder images, you need to have the files install.txt, install.wim, UnattendAudit.xml, UnattendUser.xml, WIMPART.TXT, Winre.wim. If you want to use your own image and make the USB stick with a tool (Rufus, etc), drivers for the Windows X98 Air 3G is here . If you use Rufus remember to use MBR for UEFI, not GPT!.
See the picture Figure_2
Preparation of material:
- X98 Air 3G enabled USB debugging in the settings.
- On the PC, will be available the tool adb (part of the platform SDK) and have installed the ADB drivers (adbdriver.com). The PC should recognize the X98 Air 3G before starting the procedure.
- It is recommended to install Intel Manufacturing Tools before turning the tablet on Windows tablet, in order to be able to restore it to operating condition if the procedure fails. These are available in two versions, the newer and older . Start with the newest and if do not work on your computer, install the older version. Only one version must be installed on your computer.
Upgrade Preparation tool (Intel Manufacturing Tools)
- Unzip the computer you use to convert (not tablet), the Android ROM given above.
- Unzip one of the two available sets of tools Intel Manufacturing Tools. Inside the folder, you will find some executables that run in the following order and always with administrator privileges:
iSocUSB-Driver-Setup-xxxexe: At some point during the installation, you will know that you have to connect the X98 with USB cable to the computer to install the NAND drivers. H connection is necessary otherwise you can install to see and shape the NAND memory of tablet.
IntelAndroidDrvSetupx.xxexe: We run this installer as an administrator with the tablet plugged in USB. This will install the ADB driver Intel, which appears in the Device Manager (Device Manager) for Windows.
ManufacturingFlashTool_Setup_x.xxexe: This tool is used in the final planning "name" (branding) of the tablet and install the fastboot kernel. Install with administrator rights on the proposed application folder (hold down the name of the file for the next step).
- Upon completion of the installation of the Intel Manufacturing Tool, copy the file "CUSTOM_CONFIG.INI" into the folder that the tool was installed (the default is C: \ Program Files \ Intel \ Manufacturing Flash Tool).
The function is said to be installed and the guest OS you are running on X98 Air 3G, host.
Once the installation of the guest operating, it is now host to the tablet and just run it.
Not supported - for now - the simultaneous execution of Android & Windows.
Remove the microSD card that you probably have the tablet, before initiation.
From Android host -> Windows guest (conversion to Windows tablet)
- Uncompress file BIOS_X98_Air_3G_android_to_windows.7z folder without spaces in the name (eg C: \ Temp). We should be inside the unzipped folder, a subfolder 'fpt-tools-package'.
- Connect the tablet to the PC and wait (in Windows) to recognize.
- If you have rooted your device,from a command prompt (with administrator rights), we give the following commands:
adb push c:\temp\fpt-tools-package data/local/tmp/
adb shell
cd data/local/tmp
chmod 0777 FPT
su
./FPT -F X98Air3G.bin
- If you have not rooted your device,from a command prompt (with administrator rights), we give the following commands:
adb push c:\temp\fpt-tools-package data/local/tmp/
adb root
adb shell
cd data/local/tmp
chmod 0777 FPT
./FPT -F X98Air3G.bin
- Once the execution of the last command and display the message "FPT Operation Passed", disable the tablet holding and hold POWER. See the picture Figure_3.
- Connect the two USB sticks in USB hub and the hub of the OTG port X98 Air 3G. Activating the X98 Air 3G with the POWER button, and automatically starts the installation process of Windows 8.1. The whole process takes a long time - and for this reason it is recommended that you fully charged the battery - and requires no user intervention. See the picture Figure_4.
If you do not automatically start the process, connect a USB keyboard to the hub, then reset the tablet (CTRL-ALT-DEL or off) and after doing reset, enter the UEFI BIOS by pressing DEL. At the boot menu, go to the Boot Override option and press ENTER on the USB stick (small in size) to do boot from there. See the picture Figure_5.
- When the message "WIMboot image deployment COMPLETE. Type EXIT from command prompt to restart or turn off the device." You can disconnect the USB hub and terminate the tablet. See the picture Figure_6.
The process of converting the X98 Air 3G in Windows tablet, complete!
After the Android to Windows conversion is it recommended first install the Gsensor, run the kxaccel-win8-x86-dbg-intel.exe that comes in the folder GSENSOR in the attached zip in and then execute the reg file.
Finally copy the TouchSetting.gt to C:\Windows\inf folder and reboot.
Everything should go smoothly now.
For the Italian friends I have prepared a simplified guide in Italian pdf.
CHINESE TOOL FOR CLEAN WINDOWS FOLDER AND FREE MORE SPACE (thanks to BoORDeL and keepfishes)
The zipped file is attached to this post (Windows_Cleaner.zip).
Execute the exe and click on button showed in Figure_7.
You will see a list of folder that can be cleaned (if this doesn't happen change permissions on your windows folder : http://tipsandtricksforum.com/thread-223.html )
Than select the checkbox near folders name and let the program clean them by pressing button as shown in the Figure_8
INVERTED CAMERA FIX (thanks to ro11er and Hendrickson)
You can downlad the fix from this url:
Inverted Camera FIX
You need to uninstall these three devices and reboot:
Kionix KXCJ9 Accelerometer SPB
Goodix Touch HID
Intel Graphics
Then after reboot install in this order from the attachment download in above link.
Intel Graphics
Goodix Touch
kxaccel-win8-x86-dbg-intel.exe and registry
Once registry entry is done and reboot monitor will be reversed. You must change registry to this value: 01 00 00 01 01 00 02
Very important: Do not do video drivers update or u will loose all your configuration!
UPDATED WIRELESS AND BLUETOOTH DRIVERS (thanks to Hendrickson)If you have problems with wireless when using bluetooth at the same time it was so damn slow, you can use updated bluetooth and Wireless drivers attached to this post ( Air_3G_Updated_WLAN_and_BT_drivers.zip).
These drivers were discovered November 4th from Dell site and seems to have fixed the issue.
TUTORIAL FOR DOWNLOAD WINDOWS METRO APP WITH IDM (thanks to mohamad_skiller)For read tutorial click here: Mohamad_skiller's tutorial
BATTERY PROBLEM FIX (thanks to puzdar )For read tutorial click here: puzdar's tutorial
HOW TO CHANGE LANGUAGE FROM CHINESE (thanks to Hendrickson )For see the tutorial click here: Hendrickson's tutorial
DUAL BOOT DEVELOPMENT
TUTORIAL VIDEOS
Hendrickson's complete Tutorial
This tutorial cover:
intel mfg tools installation
drivers
flashing
partitions
making a bootable usb drive
windows installation
windows drivers + fixes installation
DEMO VIDEOS
supercowz's Teclast X98 air 3G dual boot
UPGRADE FLOW PROCESS SCHEME(thanks to Petepe10)
upgrade flow process scheme
LAST BIOS
Be very carefull, you could brick your tablet if you use a version of bios not in conformity with your tablet model.I take absolutely no responsibility for damage caused by the flash of the following bios.
C9J8 ( Warning, the tablet could became instable with random rebooting and even if you turned it off you have to wait 2 min to power it again)
mirek190 modified C9J8 bios
AIR II DUAL (compatible with C6J6)
grigoris_a AIR II DUAL bios
Disclaimer : these proceedings or files are provided "as are" and i'm not responsible for any lost (hardware / software )
I would also like to point out that these procedures have been tested on C6J6 only. For C8J7, there are some additional pointers along the way, do look out. All files in this tutorial are by default for C6J6, unless otherwise stated. Is highly recommend reading through the whole post first before touching your tablet to prevent errors, or worse, bricking the whole thing
Install dual boot(C6J6) - KEEPFISHES TUTORIAL (thanks to supercowz, mohamad_skiller, ro11er and Frontier)
Please before you begin to read this tutorial is better to watch the Hendrickson's complete Tutorial video that show and explain all the needed steps for dual boot implementation.
The original post of keepfishes is here. in case he make some updates and it is not shown in this post
I found that the tutorial on the first page lacked detail and some steps were not shown clearly, so I made a new one that I think is easier to follow for newcomers! Will add screenshots soon.
Dual boot BIOS benefits:
Fixes 60Hz refresh rate for Windows 32 bit system
Probably on old bios there are low voltage settings for GPU that makes some problems with 3D games,after updated to dual bios no problems at all for many users
Drawbacks:
BIOS settings very little
No boot menu (so no easy way to reinstall Windows with a USB drive)
Time in Windows will mess up when using dual OS
The flashing process is roughly as such:
Click image for larger version
View attachment 3050134
Many of us have different start points, some are coming from Android, some from Windows, but it does not matter. First thing is to flash with dual boot BIOS, which is most important.
WARNING: (Be very careful, this part may brick your device. After you get past here, you can practically do anything you want and there is almost no risk of bricking your device, so pay attention here!)
Get dual boot BIOS files here (both C6J6 and C8J7): http://pan.baidu.com/s/1sjK4Zbn
View attachment 3048864
Extract the BIOS "完美双系统BIOS.7z" and copy the contents to the tablet.
Note the filepath on the tablet, you will need it later.
1a) Flash BIOS from existing Android system
NOTE:
If your existing Android version is 4.4.4, you can use the "UpdateIFWI.apk" that was installed on the system to flash the BIOS.
If Android version is 4.4.2 on C6J6 and there is an "UpdateIFWI.apk" on it, there have been reports that it does not flash properly. (as reported by @ambrosio5)
Current advice is to update to 4.4.4 before proceeding. .For instructions on how to upgrade to 4.4.4 from other previous Android versions, see FAQ 7 below.
From the tablet itself, run “UpdateIFWI.apk”, select "Browser" and point it to the filepath of the BIOS named "X98Air3GDuala.bin''.
STOP: Make sure you have at least 50% battery and chose the correct file! If this fails, it might BRICK!
Now flash the BIOS.
1b) Flash BIOS from existing Windows system
From the tablet itself, RUN AS ADMIN the .bat file in the folder (the one with chinese words) provided.
View attachment 3048853
After you see the Green line “FPT Operation passed”, it’s good news.
Now reboot the system and you will be taken to the BIOS screen. Just igonore it and press power button for 10 seconds to turn it off.
2) Installing ANDROID first (must be done before Windows)
Now we need to FIRST install ANDROID. This step will wipe out your whole tablet (INCLUDING ALL PREVIOUS WINDOWS AND ANDROID PARTITIONS AND DATA)
ON ANOTHER PC (not tablet), download the Android 4.4.4 Lite ROM here: https://mega.co.nz/#!KI8T0bBb!Pv25K1Rh0MJvXSCYQEC8P8l1mbsZQRgG6q5-XezP_aI
OR
SUPERCOWZ ANDROID 4.4.4 C6J6 AND C7J8 ROM For Both: https://mega.co.nz/#!zVdgWJyS!Vh7zGqX6NcYgXrCf-5v_qmEReZXuicvGzw6h1u5OnGo
OR
USE ANY OTHER ROM YOU WISH
Download this modified "partition.tbl" file from the Chinese: http://pan.baidu.com/s/1qWnxc4G
Inside are two folders, the 5000 one is 5GB Android space, the 8000 one is 8GB Android space. I personally used 5GB, because I want to leave more space for Windows.
View attachment 3048857
Download and install Notepad++, we need to edit "partition.tbl" file below, the Notepad.exe and Wordpad.exe built in on Windows DOES NOT SAVE THE FILE CORRECTLY AND WILL NOT WORK!
Extract the contents of the ROM to a folder. You should see a "partition.tbl" file inside.
This file controls how the 32GB eMMC in the tablet will be partitioned in this step.
View attachment 3048867
Copy the "partition.tbl" file FROM the Chinese download (either 5000 or 8000) TO the Android ROM folder that you extracted. Replace the original "partition.tbl" file that came with the ROM.
Edit the "partition.tbl" file in the Android ROM folder, find the second last line, which is "add -b 5931048 -s 10240000 -t data -u 80868086-8086-8086-8086-000000000008 -l data -T 0 -P 0 /dev/block/mmcblk0"
and change the highlighted number to the value of user space you want in Android. The number is a multiple of 2048, so let's say if I want 500MB user space, I would have to multiply 500MB x 2048 = 1024000 and input "1024000".
View attachment 3048872
I tried 300MB but it was too small, I think 500MB would be good if you're planning to use more Windows. Save the file!
Credits to FRONTIER for Android ROM flashing instructions (I made a number of changes):
The tools of the platform upgrade Intel (Intel Manufacturing Tools). These are available in two versions, the newer and older . Start with the newest and if do not work on your computer, install the older version. Only one version must be installed on your computer.
- Unzip the downloaded Intel Manufacturing Tools. Inside the folder, you will find some executables. RUN THEM IN THE FOLLOWING ORDER WITH ADMIN RIGHTS:
iSocUSB-Driver-Setup-xxxexe: During the installation, DO NOT PLUG IN YOUR TABLET. Near the end of the install, there will be a text asking saying that you need to plug in tablet and power cycle to complete installation. ONLY PLUG IN YOUR TABLET THEN, and do as the instruction says. After you're done, click Finish. After install, you should see Intel SOC device in your device manager.
IntelAndroidDrvSetupx.xxexe: Plug in your tablet, and MAKE SURE that your computer RECOGNISES your tablet. You will see unknown ADB device if you plug in the tablet. Now run this program as ADMIN, this will install the ADB driver for the unknown device. In device manager, if it still shows unknown device after install, manually update the driver in device manager and browse to the install directory of the driver, it will then install the driver from there.
ManufacturingFlashTool_Setup_x.xxexe: Install with ADMIN rights, this will install the Flash tool with the Lightning icon, which is the GUI interface we use to flash our tablet.
Copy the file "CUSTOM_CONFIG.INI" from the downloaded folder into the install folder of IMT (the default is C: \ Program Files \ Intel \ Manufacturing Flash Tool).
Remove the microSD card from tablet.
Run Intel Manufacturing Tools (the one with Lightning icon), In the Settings menu, change the VID and PID values to this, then click apply and OK:
If you're using Windows XP, your VID and PID values may be different to the ones shown. Check the instructions on Post #2 on how to get the values.
View attachment 3051023
Close the IMT application and launch it again. Go to the menu File -> Open. There, choose the folder of ROM you want to flash, find the file "flash.xml" and open it. The "flash.xml" file which tells IMT how to flash the tablet's eMMC.
(IF YOU ARE USING SUPERCOWZ Android 4.4.4 C6J6 and C7J8 ROM, here are his instructions, :
flash with ManufacturingFlashTool
for C6J6 open in ManufacturingFlashTool :
flashC6J6-4GB.xml or flashC6J6-8GB.xml
for C8J7 open in ManufacturingFlashTool :
flashC8J7-4GB.xml or flashC8J7-8GB.xml
this last action dedicate 4 or 8 gb of rom space for Android and you can install windows in 18.5 or22.5 gb free rom space.
Then reinstall Android rom as before (open manufacture flash tools and select flash.xml)
After install android rom you can install windows as before (using bootable windows usb disk and select 18.5 or 22.5gb rom free))
-----------------------------------------------------------------------------------------------------------------
8) Turn off the tablet holding the POWER button for 10 seconds.
- Run Intel Manufacturing Tool as administrator.
- On the tablet, hold the VOL +, VOL- and POWER until you see the "Entering DnX mode. Waiting for fastboot command..."
Click image for larger version
View attachment 3048873
- Connect the USB cable to the computer and flashing will start.
- After progress bar is green and 100%, hold down power button for 10 seconds to turn off tablet.
If the progress bar turns red, take note of the percentage that it stopped at, and refer to FAQ 1 below.
Click image for larger version
View attachment 3048876
After finishing these steps, Android is now installed on the tablet, and if you power it up, you can see the dual boot menu with the Android logo.
Click image for larger version
View attachment 3048880
If you're happy with ANDROID only without Windows, you can stop here and just boot into Android! You can go on to do the Google play store fix and others...
3) Installing Windows
If you plug in your USB drive via the OTG cable and boot up, you will see the boot menu with an Android icon and a small Windows icon. (If you don't see the boot menu at all, shut down the tablet and press Vol + and Power button until the boot menu appears).
This small Windows icon is the only way to get the BIOS to boot into your USB drive to install Windows. This dual boot BIOS has no boot menu, and in the BIOS there is no option to select to boot from USB, so this is the only way to boot to a USB drive that I know of so far...
(If you already have a USB stick prepared, skip this section in BLUE)
Preparing your Windows USB Stick:
You can install Windows via the traditional method which involves the GUI (in which case you will need an OTG HUB to plug in the USB Drive and mouse together) OR you can use a downloaded wimboot image (no need for HUB and mouse, just a thumbdrive will do).
Whatever the case, make sure your USB Drive is formatted as FAT32! Very important!
I used this wimboot image that automatically uses WinPE to get through the whole install process automatically without needing a single mouse click, which also has all the drivers and everything installed and working properly:
Waiting for repost on mega...
Link: http://pan.baidu.com/s/1hqIfAle
password: zhec
Extract the downloaded files and then copy all the contents into the root of the USB Drive. NO NEED FOR RUFUS!
If you are not using the above images, and use other Windows ISO or images as found in Page 1 or if you want to make your own images, you will need this software RUFUS:https://rufus.akeo.ie/
Follow tutorial here on creating the USB Drive: http://www.techverse.net/how-to-create-bootable-usb-flash-drive-install-windows-8-1/
Remember to use MBR for UEFI, not GPT!
If your Windows doesn't come with drivers, you can download them from here and install them:
https://mega.co.nz/#!tJdHCIAT!agSun8Wa1tOx_3tL8YMuS19j1i5wWG2WUJPprmTbTCs
Here also a Windows 8.1 PRO version with drivers and English/French language pack (thanks to supercowz):
Win 8.1 PRO with driver and eng/fr language pack
Plug in the USB drive via OTG cable or HUB, and choose the small Windows icon until it turns blue, then hit the grey button below and Windows installation should start.
If it asks you for which partition to install to, you will see a great many partitions there (due to Android), don't worry, it is normal. Typically you will install Windows to the largest available partition. (Unless you set the Android user space partition in the "partition.tbl" file previously to be huge)
DO NOT TOUCH ANY OF THE ANDROID PARTITIONS, IT WILL DESTROY THE ANDROID SYSTEM!
Everything should go smoothly from here and you can remove your OTG cable and USB drive once Windows starts asking for your User Name.
4) Final Steps
One last step. Thanks to Android, we have to hide the Android partitions from Windows, because when we open "This PC", Windows will attempt to mount all the partitions and cause the whole thing to hang.
So, go to control panel, administrative tools, computer management, then Storage, then for each of the RAW partitions that belong to Android, right click and choose "change drive letters" and choose "remove", then OK. Repeat for the rest of the partitions, leaving the C: drive alone. DO NOT DELETE ANY PARTITIONS OR ANDROID WILL NOT WORK!
Note: For people who only want to install Windows and don't want Android but still want the dual boot BIOS (due to the 60Hz refresh rate), I have tried it and it works. What you need to do is to follow this tutorial exactly, but REPLACE STEP 2 WITH THE ONE BELOW:
STEP 2) This step will wipe out your whole tablet (INCLUDING ALL PREVIOUS WINDOWS AND ANDROID PARTITIONS AND DATA)
Yes, even though we are not installing Android, we need this step still:
ON ANOTHER PC (not tablet), download the Android 4.4.4 Lite ROM here: https://mega.co.nz/#!KI8T0bBb!Pv25K1Rh0MJvXSCYQEC8P8l1mbsZQRgG6q5-XezP_aI
OR
USE ANY OTHER DOWNLOADED ROM AS YOU WISH
Download this modified "partition.tbl" file from the Chinese: http://pan.baidu.com/s/1qWnxc4G
Download and install Notepad++, we need to edit "partition.tbl" file below, the Notepad.exe and Wordpad.exe built in on Windows DOES NOT SAVE THE FILE CORRECTLY AND WILL NOT WORK!
Extract the contents of the ROM to a folder. You should see a "partition.tbl" file inside.
This file controls how the 32GB eMMC in the tablet will be partitioned in this step.
Copy the "partition.tbl" file FROM the Chinese download from the 5000M folder TO the Android ROM folder that you extracted. Replace the original "partition.tbl" file that came with the ROM. Edit the "partition.tbl" file in the Android ROM folder, find the second last line, which is "add -b 5931048 -s 10240000 -t data -u 80868086-8086-8086-8086-000000000008 -l data -T 0 -P 0 /dev/block/mmcblk0"
and change the highlighted number to 2048. Save the file!
Open "flash.xml" with Notepad++.
DELETE this chunk:
<code_group name="system">
<file TYPE="system">
<name>system.img</name>
<version>eng.yankendi</version>
</file>
</code_group>
AND THIS CHUNK BELOW:
<command>
<string>fastboot flash system $system_file</string>
<timeout>420000</timeout>
<retry>2</retry>
<description>Flashing 'system' image.</description>
<mandatory>1</mandatory>
</command>
Then save the file.
Follow the post on the FIRST PAGE HERE, scroll down and start from this part onwards “WINDOWS 8.1 => ANDROID PROCEDURE (thanks to Frontier))” until the end (stop at "GOOGLE PLAY STORE FIX (thanks to Frontier)"). READ BELOW FIRST:
Because we have already done certain steps, we can ignore some parts:
PARTS TO IGNORE:
Under the "Required materials" section
IGNORE: “- The Android DnX BIOS (or Android BIOS) from here “
If you wish, you can use Android 4.4.4 lite ROM in place of the 4.4.2 ROM as proposed here.
Under the "From Windows host -> Android guest (conversion to Android tablet)" section
IGNORE all these: (because we have already flashed BIOS)
- Unzip the Android DnX BIOS directly into the Windows installation on X98 Air 3G.
- Run with administrative rights (from command line) flash.bat file inside the folder BIOS_X98_Air_3G_android. H process starts with the completion of the installation DnX BIOS displays the message "FPT Operation Passed".
After finishing the steps, you can power it up, you can see the dual boot menu option with the Android logo and a very small Windows icon. Continue and follow STEP 3 in the guide. You can partition your 32GB eMMC in the Windows setup to remove all previously created Android partitions and make it into one large Windows partition to install Windows.
For dual boot FAQ click here
INVERTED TOUCH FIX UNDER WINDOWS (thanks to krisbliz)
You can use the DevManView to restart the "Goodix Touch HID" before the windows logon screen and everything working perfect again.
Here are the steps:
Download the file "disable enable touch driver.rar" attached to this post
So first copy the extracted files in Windows dir
Now run gpedit.msc
Computer configuration
Scripts (startup/shutdown)
Startup
Add
browse for reset driver.bat
Then reboot to test.
SPACE PROBLEMS IN WINDOWS 8.1 AFTER WINDOWS UPDATE (thanks to jcespi2005)
Follow these istructions to clean WinSxS folder:
http://www.eightforums.com/tutorials/44351-winsxs-folder-component-store-clean-up-windows-8-1-a.html
SLEEP PROBLEM IN WINDOWS 8.1 (thanks to sasort)
Follow these istructions:
First open cmd as admin and check status with this command:
powercfg /sleepstudy
It should give you this reply:
No connected standby traces available. Report not generated.
Now start regedit an go here:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Power
Change the value of the key CsEnabled from 1 to 0 and reboot.
(1 means connected standby enabled and 0 disabled.)
After reboot.
Now go to the control panel and select Energy, under Advanced there will be many new settings.
Don´t change anything, just select save settings.
Then with regedit change the CsEnabled key back to 1 and reboot again.
Open cmd as admin and again check status with the command:
powercfg /sleepstudy
It should now work and create a sleepstudy-report.html and the sleep function now works as expected.
MANAGE APP UNDER ANDROID (thanks to jcespi2005)
You can use link2sd to move app, libs and data, and FolderMount to link and move OBB and SD data to microSD
BATTERY DRAIN FIX UNDER WINDOWS (thanks to vpx)
The main problem is very old (year 2006) driver of "Intel SD Host Controller", they are 3 in Device manager. Only thing what you need is update driver.
start Computer Management (hold My Computer and select Manage)
select Device management
find SD Controllers, if you click on it, there are 3 "Intel SD Host Controller"s
hold on every one controller, select "Update Driver", select driver from computer, and there is another option "SDA Standard Compliant SD Host Controller", install driver, confirm restart of computer after last update install
reboot
WIFI FIX UNDER WINDOWS (thanks to Hendrickson)
If you see that ping on windows is very strange,sometimes i have lost packets and ping time is not stable try this fix: techtablets repository
BATTERY CALIBRATION FIX UNDER ANDROID (thanks to Hendrickson)
Try this, download and run advanced battery calibrator from Play and Battery Life repair:
Blackmart Studios - Battery riparator
Blackmart Studios - Advanced Battery Calibrator
This seems to have fixed the issue.
Maybe you should copy some post about Air 3G from X98 Air thread?
Nice english instructions for rooting, Win->Android, Android->Win, removal of bloatware etc. would be nice. Everyone can use google translate to navigate official chinese forums but you will get funny translations like "Brush Wizard software". If instructions are unclear and they leave space for interpretation mistakes can happen. Worst case scenario is bricked device.
After using windows and Android I still have the same gpu issues. I also looked in the log and at the end of every crashlog (in android) I see a dev_prive->gpu_error, which is a call from the kernel. (I saw some code on the internet about this) So, my intel Atom chip is bad. Going to return it and ask for a replacement.
The error seems to only happen when I use an app that uses opengl 3.0 (and a LOT of games use that!).
Also about the touchscreen, there seems to be a major problem with the driver in linux. Since I guess they cross-compiled the driver, I am guessing they made the same mistake in both android(linux) and windows.
How did I verify this? Well I used a goodix android application which had some demo app and I saw that the moments the touchscreen gets refreshed are not constant. Let me explain.
When I slide my finger over the touchscreen with a constant speed this happens to my tablets:
This is what my "old and smooth" tablet does(every dot is a touchscreen refresh): .---------.---------.---------.---------.---------.---------.---------.---------. (this is a constant refresh)
This is what my X98 Air 3G does: .--------.--.---------.-.-------.------.-------.-.-----.-----.-.-----.------.----.----.---------.-------.----. (not constant at all)
So the times the touchscreen gets refreshed is not constant. The result is that especially scrolling doesn't work that smooth.
And on top of that, the response time is extremely slow. I am guessing that the driver puts the touchscreen into sleep mode after every single touch, which is stupid. The response (as stated in the goodix GT9271 datasheet) is <200ms. Lets say it's about 100ms, do you know how slow that is??? If your mouse would only refresh every 10th of a second, it would be extremely slow!!!
If I didn't have gpu issues and the touchscreen issue would be corrected, this tablet would be superb, but that is not the case of course.
I am going to contact Teclast if they want my help in enhancing the touchscreen driver. (I am an embedded software engineer specialized in C/C++/C# code)
Also, I might be able to make simple C# app that does most of the work when you want to flash your tablet from android to windows. (this could also be done with a very simple windows batch script)
Jote said:
Everyone can use google translate to navigate official chinese forums but you will get funny translations like "Brush Wizard software". If instructions are unclear and they leave space for interpretation mistakes can happen. Worst case scenario is bricked device.
Click to expand...
Click to collapse
Hi Jote, sorry again for my bad english.
The biggest problem is that most of the information and instructions on how to root, how to change OS,etc.. come from the Chinese manufacturer's forum.
As written before your help in any way will be really appreciated! This is true also about the translation from chinese to the english language.
I ordered this tablet because I think it has enormous potential enclosed in a shell of very small dimensions, if we combine our knowledge to bridge the gap of the Chinese language I think we have great satisfaction with it.
I will try to add link to files for rooting, for change the OS and get other resources asap.
My tablet hasn't arrived yet but I tried to prepare everything.
I'm unable to browse the official forum. I've tried on several days but forums are just working extremely slow. When i try to browse directly through Google Translate I get "Proxy server to access restrictions ". I'll try again someday to find proper threads but right now i'm useless.
So the touch screen is going into sleep states very quickly? I noticed compared to the Onda v975w that it was much slower. I have the X98 3G air now and I have gotten use to it. But it would be nicer if it was how you pointed out.
I have disabled Allow the computer to turn off this device to save power, under power management on the Goodix Touch HID in device manager.
Jote said:
My tablet hasn't arrived yet but I tried to prepare everything.
I'm unable to browse the official forum. I've tried on several days but forums are just working extremely slow. When i try to browse directly through Google Translate I get "Proxy server to access restrictions ". I'll try again someday to find proper threads but right now i'm useless.
Click to expand...
Click to collapse
You have to use translator from bing/microsoft to translate threads from teclast forum at www .bing.com/translator/ (sorry, I'm not allowed to post links yet)
Hendrickson said:
So the touch screen is going into sleep states very quickly? I noticed compared to the Onda v975w that it was much slower. I have the X98 3G air now and I have gotten use to it. But it would be nicer if it was how you pointed out.
I have disabled Allow the computer to turn off this device to save power, under power management on the Goodix Touch HID in device manager.
Click to expand...
Click to collapse
Yes, that it what I am claiming right now based on the information I know and what I have experienced at this point.
I attached the zip containing the datasheet of the goodix GT9271 touchscreen controller. (it's the touchscreen controller inside our tablet if I can believe the log)
The zip also contains an android app from goodix. You can select demo in the menu and then test the touchscreen in various ways. Give it a try
Disabling the "Allow the computer to turn off this device to save power" isn't going to work I think. It can only be done in the driver and I am not sure if it's even supported. It's standard USB stuff, but the GT9271 is connected via I2C. This is a Inter-IC Connection to other chips (IC's) of smartphones/tablets like touchscreen controllers, temperature sensors, accelerometers, gyroscopes etc.
I use it a lot in embedded software engineering and I2C is a very common connection in embedded applications. USB is very heavy for small systems, but I2C does require "special code" to get it up and running.
This will give you a better idea of what an I2C connection is capable of(example of RK3288):
http://www.arctablet.com/blog/wp-content/uploads/2014/02/RK3288-2-nowrmk.jpg
Sorry for all the information
Edit: I contacted Teclast and said I'd like to offer them help for free. Let's hope they accept my free help. (if they are smart...)
Someone can check if is it true?
https://twitter.com/srsroot/status/522464839294550017
petruccig said:
Useful Tools
Root : http://www.mgyun.com/vroot
Click to expand...
Click to collapse
This link doesn't work ...
malojk said:
This link doesn't work ...
Click to expand...
Click to collapse
i uploaded the latest chinese version of vROOT for you and the others :good:
vRoot
http://d-h.st/lWu
With the help of a member of another forum, probably very soon we will have a detailed explanation of the steps for change the Operating System in a better english than mine .
Stay tuned.
petruccig said:
With the help of a member of another forum, probably very soon we will have a detailed explanation of the steps for change the Operating System in a better english than mine .
Stay tuned.
Click to expand...
Click to collapse
Which forum if I may ask?
LVL91 said:
Which forum if I may ask?
Click to expand...
Click to collapse
I've set-up an easy to follow guide (in Greek) for Android -> Windows flashing.
The link is here and the translated (in English) link is here.
The procedure of flashing from Windows -> Android is here (English translation is here).
Feel free to copy it and post it here in order to help others.
I have a question about the screen, namely, whether at you vertically (then best seen) is the difference between the left and right sides of the LCD to the distance from the frame (the black space)? In my left is approximately 2 mm and 1 mm from the right. Such a little thing but unobtrusive I hope you understand what I mean.
Next case. Has anyone tried to install on Android Xposed? For me, after the installation of almost every application resets the tablet .
How can I boost speaker volume in this tablet?