Database Develop

[q] overclocking noob question

So i have been able to clock my captivate to a stable 1300 using suckerpunch #57. I'm wondering though how often do you think are phones actually use this frequency? i know when i'm running a psx emulator im sure that it probably has the cpu maxed out, which runs tekken 3 beautifully now at no lower then 48 fps, but i hope on not much else (would be nice to find an app that would put the cpu used clock speed on taskbar). Only reason i wonder is because of course phones don't have cooling systems like computers so i worry about cpu life.

Nerz said:
So i have been able to clock my captivate to a stable 1300 using suckerpunch #57. I'm wondering though how often do you think are phones actually use this frequency? i know when i'm running a psx emulator im sure that it probably has the cpu maxed out, which runs tekken 3 beautifully now at no lower then 48 fps, but i hope on not much else (would be nice to find an app that would put the cpu used clock speed on taskbar). Only reason i wonder is because of course phones don't have cooling systems like computers so i worry about cpu life.
Click to expand...
Click to collapse
i have never seen the cpu get hot in my phone. it gets unstable before any heat is detected, but my phone is not very overclockable, i can get 1.3 with much care to the uv settings. i wouldnt worry about heat until the 1.4 mark, even then you are probably fine. the newer qualcom chips have been set to run at 1.9ghz and dont burn up they are on the same size architecture as ours. these arm chips run at such low voltages that heat is not really a big problem. i dont think anyone on the board has killed a hummingbird from overclocking it.

I think your speaking pre-emptively about not burning up.
Just because the chip doesn't instantly melt doesn't mean your not risking electro migration.

Nerz said:
So i have been able to clock my captivate to a stable 1300 using suckerpunch #57. I'm wondering though how often do you think are phones actually use this frequency? i know when i'm running a psx emulator im sure that it probably has the cpu maxed out, which runs tekken 3 beautifully now at no lower then 48 fps, but i hope on not much else (would be nice to find an app that would put the cpu used clock speed on taskbar). Only reason i wonder is because of course phones don't have cooling systems like computers so i worry about cpu life.
Click to expand...
Click to collapse
this chip has a built in fail safe and can run as long as it can handle it automatically freezes or reboot your phone above its capable limit. If you want real time monitoring of your cpu clock speed/usage, ram usage and battery temp download Temp+CPU V2 widget from the market pretty good app. enjoy

Tegra Overclock OUYA Edition is finally here :)

What this app is gonna do?
This will give you some boost that is really required to play games that are demanding on GPU front.
What this app require?
You need to be ROOTed and for that there is a really great app with one touch facility available! The link is http://forum.xda-developers.com/showthread.php?t=2387507
After you get ROOTed just install the Tegra Overclock OUYA EDITION app from attachment and click on OK for one click optimization.
You can also change the actual resolution to somewhat lower to again get a massive boost in GPU intensive games or shall I say those games that scale with GPU clocks very well. (I can confirm nearly 2X boost in RipTideGP2 with all settings maxed out when comparing with 1080p to 720p option provided in the app :laugh
Any kind of hazardous warning before use?
If anything goes wrong then you know where the power switch is! Close the console and cut the power and start again. We have not implemented the on Boot settings for safety reasons...
What about future updates?
I just wish that 4.2.2 gets for the OUYA and that will be a game changer for the console as that support full screen scaling on resolution changing vs screen compensation provided by current android 4.1 version....
NOTE: The app is fully free to use one click solution for OUYA owners and don't require you to get involve in any of cracking stuff Still the app does costs us in development and support front so any kind of donation will be greatly appreciated. If you are planning to buy any Tegra device in future then you can support us by purchasing the original Tegra Overclock app from the market that will in turn benefit you as well..
BTW don't forget to hit the thanks button
EDIT: Version 1.1 Change log
*Nothing new just made the interactive governor as a default rather than performance governor due to heating concern.
*Checked the code so that 2D GPU is set to 520 MHz too, in case it still reports half let me know..
EDIT: Version 1.2 Change Log
***Added requested LBCMT (LastBootCpuMaximumTemperature!) This shows the maximum temperature your device went during last boot.
***Added apply on boot (Works only when the USB device with at least a single file is detected to ensure you don't intentionally mess up anywhere )
The LBCMT will works as soon as you boot once after you open the app for the first time. Also note that YOU SHOULD NOT KILL THE APP manually by task killers or the reporting will be fake. BEWARE....
EDIT: Version 1.3 Change LOG
***Full screen stretched resolution support for CM11 Rom users. Use the special newly added resolution (will only work for CM users currently as no other 4.3 or 4.4 Roms available)
Fixes for temp not showing on custom kernel like EPRJ Kernel.
Thank you for being patient.

Kingshoo said:
What this app is gonna do?
This will give you some boost that is really required to play games that are demanding on GPU front.
What this app require?
You need to be ROOTed and for that there is a really great app with one touch facility available! The link is http://forum.xda-developers.com/showthread.php?t=2387507
After you get ROOTed just install the Tegra Overclock OUYA EDITION app from attachment and click on OK for one click optimization.
You can also change the actual resolution to somewhat lower to again get a massive boost in GPU intensive games or shall I say those games that scale with GPU clocks very well. (I can confirm nearly 2X boost in RipTideGP2 with all settings maxed out when comparing with 1080p to 720p option provided in the app :laugh
Any kind of hazardous warning before use?
If anything goes wrong then you know where the power switch is! Close the console and cut the power and start again. We have not implemented the on Boot settings for safety reasons...
What about future updates?
I just wish that 4.2.2 gets for the OUYA and that will be a game changer for the console as that support full screen scaling on resolution changing vs screen compensation provided by current android 4.1 version....
NOTE: The app is fully free to use one click solution for OUYA owners and don't require you to get involve in any of cracking stuff Still the app does costs us in development and support front so any kind of donation will be greatly appreciated. If you are planning to buy any Tegra device in future then you can support us by purchasing the original Tegra Overclock app from the market that will in turn benefit you as well..
BTW don't forget to hit the thanks button
Click to expand...
Click to collapse
now a simple question....can you tell me which options i need to use for get a best performance in ouya games and emu?

This app has a one click solution (found in the op). All you need to do is click the button and your ouya is optimized. The op already has this information.
On another note, this app rocks. Thank you.

Awesome, finally the OUYA version, im about to jump on this right now and give it a spin!!!:good:

darkknight1812 said:
This app has a one click solution (found in the op). All you need to do is click the button and your ouya is optimized. The op already has this information.
On another note, this app rocks. Thank you.
Click to expand...
Click to collapse
i asked before install...now i saw it very nice and user friendly

.. one click optimization .. nice job .. cheers

sasuke1981 said:
now a simple question....can you tell me which options i need to use for get a best performance in ouya games and emu?
Click to expand...
Click to collapse
Just Press the OK button and wait a few seconds as the settings getting applied. After that Run your Emulator Games and you should notice a difference . Note that Resolution options also cuts the screen area so use them only if a game is unplayable!

is there no way to allow users to set advanced profiles so that they can configure a medium and max overclock setting?
i saw the temps on my core rise up pretty quickly just from fiddling with the UI, not sure if I want to subject this little guy to that much abuse with no really efficient cooling solution under the hood.

Careless_ said:
is there no way to allow users to set advanced profiles so that they can configure a medium and max overclock setting?
i saw the temps on my core rise up pretty quickly just from fiddling with the UI, not sure if I want to subject this little guy to that much abuse with no really efficient cooling solution under the hood.
Click to expand...
Click to collapse
it's understandable for the lil guy to get hot quickly when you are overclocking the GPU+CPU, can't expected to run cool unless you put a better cooling fan into you console, i don't mid my ouya running a lil hot, well mines don't get hot enough cause my ouya got a acrylic custom shell with enough vents and airflow that keeps my console way cooler then the ouya stock/factory shell...

its obvious that it would run hotter if the clock speed is higher. no one is disputing that. i just don't see how not allowing the user to specify speed as much of the other CPU overclocking programs like SetCPU allow the user to do.
It's a needed feature IF it can be supported and implemented.

Excellent!
I'll give this a bash tonight and see what improvements there are!

Careless_ said:
is there no way to allow users to set advanced profiles so that they can configure a medium and max overclock setting?
i saw the temps on my core rise up pretty quickly just from fiddling with the UI, not sure if I want to subject this little guy to that much abuse with no really efficient cooling solution under the hood.
Click to expand...
Click to collapse
Actually Temperatures are no problem for this chip as it can bear temperatures of 70 C with great ease as the manufacturer mentioned. Don't worry about that also let me know if they are above this temperature so that we can do something about that. If you ask me I am comfortable with 85C as that is what the throttle temperatures (Default mind you!). Just Relax and crush the games already

Careless_ said:
its obvious that it would run hotter if the clock speed is higher. no one is disputing that. i just don't see how not allowing the user to specify speed as much of the other CPU overclocking programs like SetCPU allow the user to do.
It's a needed feature IF it can be supported and implemented.
Click to expand...
Click to collapse
The custom CPU clock feature conflict the one click feature and not to mention lower clocks are not required as there is no trouble with the highest speed since the cooling is active and with sink. Just don't worry about the temps too much as everything is normal here and the purpose of console is to bear high temperatures with high load even with little heat management..

I have both the old app and the Ouya specific one and it looks to me that 2D GPU clock is set to 260MHz (1/2 of 3D clock). @Kingshoo, can you tell us what the "one click" settings are (governor, CPU clock, GPU, etc).
Much appreciate the work you've done.

Ipse_Tase said:
I have both the old app and the Ouya specific one and it looks to me that 2D GPU clock is set to 260MHz (1/2 of 3D clock). Can you tell us what the "one click" settings are (governor, CPU clock, GPU, etc).
Much appreciate the work you've done.
Click to expand...
Click to collapse
Oh really If its working on Half then I will bump that to full to in next iteration
Settings are nothing but final settings in one click. Meaning Performance governor (Because this one has no polling overhead as opposed to interactive). GPU to 520Mhz, CPU clock to 1.7Ghz (1.6 on all 4 cores as set by OUYA). Ram at 800Mhz and also no throttling on Ram and GPU so that performance is reduced only due to H/W limitation or by bad coding practices and not due to some power saving logics

Kingshoo said:
Oh really If its working on Half then I will bump that to full to in next iteration
Settings are nothing but final settings in one click. Meaning Performance governor (Because this one has no polling overhead as opposed to interactive). GPU to 520Mhz, CPU clock to 1.7Ghz (1.6 on all 4 cores as set by OUYA). Ram at 800Mhz and also no throttling on Ram and GPU so that performance is reduced only due to H/W limitation or by bad coding practices and not due to some power saving logics
Click to expand...
Click to collapse
Cool...thanks! Looking forward to v2
BTW...for reference, I had my governor set to performance for a while and it drove the fan to run almost at all times. To the point I ended up shelling 20 bux to buy the Noctua quiet fan. Maybe others have better luck with the stock fan - but if noise is a concern, I found that the "Interactive" governor scales pretty fast with no visible impact on performance vs "Performance".
My 2 cents.

After reading several reviews about Noctua 40x10mm A-Series Blades with AAO Frame, SSO2 Bearing Premium Retail Cooling Fan NF-A4x10, I decided to buy it. I replaced the noisy fan of my OUYA, and the difference in sound is amazing. I had to check if the fan was actually running because barely hear it. Also, the temperature of my equipment dropped ~ 10°C, so overheating issues could be easily fixed, if you decided to overclock. I recommend this product without a doubt. Check on eBay or Amazon.
If you want to replace the fan, here's a guide how to do it. youtube . com /watch?v=rra0FwlHvBA

Well honestly I wasn't able to play games on OUYA but since you people are playing games what the temps of CPU are anyways after say an hour? I am asking this because I don't see a need for custom coolers as 50C or 70C it really don't make any difference to your hardware. Yes the fan noise may be concerning to many but I have cotton plugs in my ears to keep it silent (these really costs cents and not $$!). OK so newer version will have interactive on one click..

My stock fan is totally silent anyway
Sent from my ADR6350 using Tapatalk

Ipse_Tase said:
Cool...thanks! Looking forward to v2
BTW...for reference, I had my governor set to performance for a while and it drove the fan to run almost at all times. To the point I ended up shelling 20 bux to buy the Noctua quiet fan. Maybe others have better luck with the stock fan - but if noise is a concern, I found that the "Interactive" governor scales pretty fast with no visible impact on performance vs "Performance".
My 2 cents.
Click to expand...
Click to collapse
i will also try this, i run my OUYA on performance all the time and it's pretty loud...

galaxy tab s2 9.7 increase gaming performance

In some games i get lag spike like gta san anders play on medium seatings and rawensword 2 i use game tuner but not help . how to increase performance for gaming maybe custom kernel or overcloking if its possible for it or some kind programs I'm new in android staff.

If the graphics on the 815 don't work for you then surely don't replace it with an 813/819. The GPU is supposed to be better on the one you have.
I don't think these are gaming tablets really. I don't know any that are but that's not my thing. They do have more RAM and better screens than most other tablets.

any other option ?

Maybe Apple is better for gaming? I really don't know. Hopefully a clueful individual will answer you. I am too new to the whole tablet world to know much.

i find gltools maybe its improve performance i see a lot of video of it . but its need root access? who have experience from it ?

I guess you could change the thread title and perhaps get more help.

bump any suggestion? i need to improve performance for some games not to much a bit game now rawensword runs 20 fps sometime drops to 15 in fights :/ i like to boost to 30 fps any suggestion i try different programs but no luck :/

The issue is simple. The Exynos version throttles like mad with continuous high usage (games and video SW rendering). And you can do nothing about it. From what I read, the snapdragon version doesn't throttle as bad/at all. I recommend switching to android 6 if you haven't done that already, as it increases the performance by a little bit, as well as setting the resolution in those heavier game to 50% and force capping the frame rate to 30.

Dariusdd said:
The issue is simple. The Exynos version throttles like mad with continuous high usage (games and video SW rendering). And you can do nothing about it. From what I read, the snapdragon version doesn't throttle as bad/at all. I recommend switching to android 6 if you haven't done that already, as it increases the performance by a little bit, as well as setting the resolution in those heavier game to 50% and force capping the frame rate to 30.
Click to expand...
Click to collapse
I've had the exact opposite experience.
The snapdragon version lags with many games while the exynos version played all these games smoothly...
Sent from my iPad using Tapatalk

It's certainly peculiar. I couldn't play Asphalt 8 for too long without setting the resolution all the way down to 50%(1024x768). At 1080p it'd start lagging really bad on me in about 3-4 minutes at best. That doesn't mean it doesn't have an adequate overall performance, it's flying, but anything as heavy as asphalt or worse would bring it to its knees.

strange in asphalt 8 i have no lag run rely smoothly only san andres and rawensword run not what great san andres 25~28 medium graphic rawensword 22 in fight with max distance other setting cant change.

For 5.1 I was using optimal rom found in development section. He also made a kernel you could over clock with synapse support found here http://forum.xda-developers.com/tab-s2/development/nn-kernel-lp-t701-t3309570.com With synapse you can force the gpu to over clock along with cpu. Download synapse from market. In setting developer options turn off hardware overlays ticking that on will use the gpu for rendering. Off (default) cpu. At least that is my understanding. Some games work better with it on others off. Minecraft on I got 60fps at 2nd highest view distance using customers textures. Yet terraria would stutter on certain conditions but never a problem with it turned off. Warning though it will make your device hot where the cpu is. I've got no idea how well you're games will play as I have never played them. I did get a noticeable difference from stock vs the above. So maybe it's an option worth trying.

Hm thx for advise but i read all posts but i don't see anything say it's for 6.0 marshmallow and my it's sm-t815 lite version i only see 810? Maybe its work for my device ?

Might be too different. Not sure.
http://www.devicespecifications.com/en/comparison/676f391aa
You have mobile data and I just have WiFi. Everything else seemed the same.
On my xoom it was from Verizon I flashed WiFi only rom and kernels. Lost mobile data but all was fine. As long as the kernal matched the rom. Worse case recover backup or Odin MM back on it. Just use the kernel with a 5.1 810 rom plus whatever you need to root it. I used that kernel with a few different romps but never cm since that's liable to be experimental still on my death bed. So it felt compatible with any 810 rom. If I was you and didn't mind losing cellular data I would treat it as an 810. Maybe do a bit more research and make sure they really are similar.

its same i see ok but one question if i flash this kernel how much i can improve performance like gta san andres can i play max at normal frame rate become on max now i have 17~21 fps i ask it become i was thinking its wort or not don't want to lose warranty

If you don't want to lose warranty then stock it is. That's my advise. I highly doubt you would break it but still if you dropped it in get it. You want that available. I've seen root options that don't trip Knox but I didn't care to research because I didn't have a warranty. I knew using ct auto root would void warrenty (method I used) before doing it. Search for different rooting options to 810.
I get not wanting to void warranty but if you're over clocking it, rooting, accept it as a trade off. You replied before I edited my last post so maybe reread. They are slightly different.

um when how about performance in gaming ? there i mention it i read it make 2.0ghz for 4 core and for others 1.5 or 1.6 it make huge boost in game or just small i rely care about it. ?

That sounds right. And the gpu goes up to 700hz. I think stock is 600. I don't play the games you are so can't say for sure performance but it was noticeable for me. I set both cpu min 1,000 max whatever max it allowed like you mentioned. So if it needed cpu it was there. Gpu I did max because there is a noticeable difference going from 600 to 650 to 700. Put the min as the max. Then toggle on turn off hardware overlays. Other games preferred the opposite. Max cpu for both and min close to max, whatever for gpu and no toggle for turn off hardware overlays.
Don't do max cpu and max Gpu. To much heat without any improvement. Pick one or the other as max, other one able to if needed. Here is what I ended up with.
Mine craft liked the first option. Not sure what it was playing at before over clocking. Maybe 30-40 fps while flying in creative mode. Got up to 60 fps no stuttering unless I was at a huge super dense forest biome where you couldn't see the ground. Probably used 25% per hour. I know mine craft doesn't sound like much but I had fancy on (transparent leaves), 128bit textures, 2nd highest view (it was far), and flying really fast in creative. Even bought a controller because of it. Though it actualy plays and feels better without. To wierd.
Terraria preferred all cpu so second option. Again you think but it's 2d. It isn't optimized by any means. Even on pc that game uses more then one would believe. I played at 60 fps with no slowdowns on second option. Without over clock it would stutter fairly easily vs completly smooth. It felt like whoever programed the cpu made sure they never gave enough power at any given time as a cruel joke. With synapse I could set the min as max and over clock it.
All I can say in the end it is noticable. It was enough to get 60fps. For a 2d game, it wasn't worth playing unless it was so. Download terraria dig a bit underground, get some lighting going and some enemies. Notice the wonderful stutter and ask why, it's 2d. Then you can decide if that vs 60 fps is worth the void warrenty and possibly broken device achieving it.

can y try gta san andres on max with overclock your system ? i'm rely curios

No.
Sent from my SM-T810 using XDA-Developers mobile app

Red Magic Vs OnePlus 5T speed test

Hello guys, I've got the OnePlus 5T and I was looking to upgrade to the Red Magic eventually but after watching that speed test video https://youtu.be/okGb8lqg8fA I don't see the RM being any faster and the active cooling seems to be a gimmick of some sort as it runs hotter than the OnePlus 5T as shown in that video. I know the firmware is not final but I seriously doubt they'll do any miracles especially in the stock version...but in the same time I'm scared of getting the Chinese version because it probably won't support Play Store and so on. What do you guys think, should I keep the OP5T?

Well hopefully we'll see more optimization before long on the RM. I haven't had any heat issues, and it has seemed cooler than most. Even when I was running an app to intentionally drain the battery by activating everything it didn't get that hot.
Overall for general performance, you won't see much performance difference between the two. They use a lot of the same components. Theoretically you should see some performance gains with game boost on because it locks the last four cores to their max frequency. No operations used trying to dynamically adjust. Really depends on if the app would even benefit from the frequency boost though.

Harfainx said:
Well hopefully we'll see more optimization before long on the RM. I haven't had any heat issues, and it has seemed cooler than most. Even when I was running an app to intentionally drain the battery by activating everything it didn't get that hot.
Overall for general performance, you won't see much performance difference between the two. They use a lot of the same components. Theoretically you should see some performance gains with game boost on because it locks the last four cores to their max frequency. No operations used trying to dynamically adjust. Really depends on if the app would even benefit from the frequency boost though.
Click to expand...
Click to collapse
I guess if the game button triggers the full potential of the CPUs that's why it heats up more than the OP5T which never runs on 100% but somehow manages pretty much the same frame rates. You must be right about whether an app can actually utilise the full potential or not.

skromnia said:
I guess if the game button triggers the full potential of the CPUs that's why it heats up more than the OP5T which never runs on 100% but somehow manages pretty much the same frame rates. You must be right about whether an app can actually utilise the full potential or not.
Click to expand...
Click to collapse
Old post revived. But did you see the stress test of antutu in that video ? Nubia tries to stay almost to 100% all the time. That's how a gaming aka performance phone should be.

ben cherian said:
Old post revived. But did you see the stress test of antutu in that video ? Nubia tries to stay almost to 100% all the time. That's how a gaming aka performance phone should be.
Click to expand...
Click to collapse
How much battery and CPu temp you have while idle?

Question Galaxy Tab S8 lagging in games compared to Tab S7

Hello
I have upgraded my Tab S7 to Tab S8. And I have expected new device be much faster and smoother, but what I found that games are really lagging! It was perfectly smooth on S7 but not on S8. Game mode does not help much. I do not play a log of games on this tablet as I used it mostly for developement, but I do play Harry Potter Puzzle and Spells and this game lags pretty bad on S8.
What can be done to fix it or should I wait for Samsung to release update? I do know about Samsung's throttling on S8 devices but I never expect it to be that bad.

And in addition (don't want to open another thread) it seems that S8 has more aggressive memory settings because it unloads apps from memory over time. Which never happened on S7. S8 has more memory and I think it should keep more opened apps, not reloading them. And yes, settings in developer section (do not keep activities) is not enabled

Ray Adams said:
And in addition (don't want to open another thread) it seems that S8 has more aggressive memory settings because it unloads apps from memory over time. Which never happened on S7. S8 has more memory and I think it should keep more opened apps, not reloading them. And yes, settings in developer section (do not keep activities) is not enabled
Click to expand...
Click to collapse
This has to do to android 12, s7 was only on android 11, but also is on 12 now. So then it automatically puts apps into deep sleep. You can remove that under battery settings area and remove apps from deep sleep mode.
About lagging it might be new game mode from samsung since apparently samsung did on purpose limit hardware but added a settings into app that let's you gain more performance in games. Should be in game engine or w.e name is and then settings and then Labs and enable experimental feature there that should boost performance and stop limit the hardware for game.

When I replaces S7 it was already on Android 12 but I never observed such behavior. Anyway, I have put game into never sleep list. As about lags, unfortunately I found no options for that

Ray Adams said:
Hello
I have upgraded my Tab S7 to Tab S8. And I have expected new device be much faster and smoother, but what I found that games are really lagging! It was perfectly smooth on S7 but not on S8. Game mode does not help much. I do not play a log of games on this tablet as I used it mostly for developement, but I do play Harry Potter Puzzle and Spells and this game lags pretty bad on S8.
What can be done to fix it or should I wait for Samsung to release update? I do know about Samsung's throttling on S8 devices but I never expect it to be that bad.
Click to expand...
Click to collapse
I was noticing this particular with emulation since I don't play many native android games. When playing Sonic Colors at native res on my Tab S7+, it would almost never go below 30fps in level, and almost never below 60fps in the hub and menus. However, when I tried doing the same on the S8+, I had a bunch of stuttering and performance issues no matter what version of dolphin I used. There was a workaround to this (at least for me). These issues only happened when I restored my data to my new S8+ with Smart Switch, but when I just put all my data and stuff on there manually, the issues seemingly stopped happening. The only game I throttle in is Fortnite, which didn't have the 90fps option even though the S7+ did. The game still didn't feel much different before and after the throttle, still pretty consistent framerates overall.
Edit: Just fixing typos.

SavXL said:
I was noticing this particular with emulation since I don't play many native android games. When playing Sonic Colors at native res on my Tab S7+, it would almost never go below 30fps in level, and almost never below 60fps in the hub and menus. However, when I tried doing the same on the S8+, and I had a bunch of stuttering and performance issues no matter what version of dolphin I used. There was a workaround to this (at least for me). These issues only happened when I restored my data to my new S8+ with Smart Switch, but when I just put all my data and stuff on there manually, the issues seemingly stopped happening. The only game I throttle in is Fortnite, which didn't have the 90fps option even though the S7+ did. The game still didn't feel much different before and after the throttle, still pretty consistent framerates overall.
Click to expand...
Click to collapse
Did you used cloud backup or restored through cable or it's the same thing? I have similar problem, but with benchmark results. My device can't get even average model score in 3DMark (about 2 to 8%). Geekbench scores are worse than snapdragon 865 devices. I don't know what's going on. I already tried to reflash stock rom with odin, but that didn't help. Hopefully not using cloud backup will help.

HPLazerJetPrinter1012 said:
Did you used cloud backup or restored through cable or it's the same thing? I have similar problem, but with benchmark results. My device can't get even average model score in 3DMark (about 2 to 8%). Geekbench scores are worse than snapdragon 865 devices. I don't know what's going on. I already tried to reflash stock rom with odin, but that didn't help. Hopefully not using cloud backup will help.
Click to expand...
Click to collapse
I initially restored with a cable, but once I started getting shawty performance, I made a backup on my sd card and restored it from there with Smart Switch. I never used cloud backup since that takes a lot of time for me. After getting suboptimal results with both, I just bit the bullet and slowly started adding everything and getting it to how it was on my old devices. Only then did I get getting substatiall better results. Now I can run a lot of Wii/GC/3DS/PS2 games at 1.5x, 2x, and sometimes even 3x without getting throttled. Not sure why using smart switch tanked my performance, but all I know is that it's not tanking now.

Thats interesting. Because I also moved data using cable. I do not know how good is cloud since I never did it before (only on Apple devices).
I might try to fully format tablet and test it again.
Will provide more information later

Ray Adams said:
Thats interesting. Because I also moved data using cable. I do not know how good is cloud since I never did it before (only on Apple devices).
I might try to fully format tablet and test it again.
Will provide more information later
Click to expand...
Click to collapse
I tried formatting few days ago, and that didn't help. At least for me this problem is not related to Smart Switch. Do you also have bad benchmark scores? I understand that benchmarks are not very good indicator of performance (especially due to GOS), but I expect to have at least average SD8gen1 performance, not the level of SD855.

Did reset to factory settings. It is much better at least for now. Benchmark - tested only Geekbench 5. Result the same

Hi.. I'm experiencing the same problem here.. any updates regarding this problem? My geekbench score can't even surpass an exynos 2100.. it only achieve around 700ish on single core.. the first time I notice this is when I tried playing granturismo with aethersx2.. and it can't even handle the 1x reso.. hhhh.. really frustrated here.. please kindly share any clues regarding this topic thanks in advance.. sorry not a native English speaker

I had same problem, but, i solved using this:
ADB AppControl 1.7.5
(disable all game service (i'm not remember how many)). For me it's work great
--edit
i disabled bixdy and others apps too

First.. thank you for the answer! Might try it out later..
So it's like disabling the "GOS" right? Is it different from the "alternate game performance" option in game booster? They said it's the "official" way to disable the GOS.. but yeah I didn't find any difference after enabling that option though... Hmm..
Hmm...also.. What makes me wonder is.. I saw some reviewers review this device without any tweaking needed and they could achieve a 8gen1'ish results in benchmarks.. and also if you know ETA prime on YouTube.. he reviewed a tab s8 ultra and is able to run a granturismo 4 with aethersx2 (ps2 emulator) in 3x reso in default settings with no problems... I know it's a different device but it's supposed to have a same Chip right?
All of this things makes me frustrated because it was not what i expected from a 8gen1 device.. moreover I saw a sd870 device could run the granturismo 4 in the same settings with no problems.. it really broke my heart..

The issue mainly lies in the SOC.
Even though, SD8 Gen 1 has a much higher peak performance, especially in GPU, it can't sustain that performance due to excesive power consumption which results in thermal throttling.
GOS is another thing that affects the whole experience, it's limiting the performance of the device.

ekin_strops said:
The issue mainly lies in the SOC.
Even though, SD8 Gen 1 has a much higher peak performance, especially in GPU, it can't sustain that performance due to excesive power consumption which results in thermal throttling.
GOS is another thing that affects the whole experience, it's limiting the performance of the device.
Click to expand...
Click to collapse
Yeah.. I think this is mainly what cause the problem.. The 8gen1 itself..
a quick update regarding this from me..
I've done some re-test in benchmark and real game perfomance but this time im doing it in a well conditioned (cooled) room..
previously I was doing the test and gaming and in a room without any Air Conditioner and I lived in a tropical country which is really hot and humid...
the benchmark results (3d wildlife) came out Nice in a well cooled room, It scores what most of Tab S8 would score and the real life perfomance (PS2 emulator) is also improved..
it manages to handle GranTurismo 4 in aethersx2 with 3x reso on safe setting quite well..
the CPU temperature is well managed in around 35'ish Celcius compared to 45'ish when not using any air conditioner...

Bege21 said:
Yeah.. I think this is mainly what cause the problem.. The 8gen1 itself..
a quick update regarding this from me..
I've done some re-test in benchmark and real game perfomance but this time im doing it in a well conditioned (cooled) room..
previously I was doing the test and gaming and in a room without any Air Conditioner and I lived in a tropical country which is really hot and humid...
the benchmark results (3d wildlife) came out Nice in a well cooled room, It scores what most of Tab S8 would score and the real life perfomance (PS2 emulator) is also improved..
it manages to handle GranTurismo 4 in aethersx2 with 3x reso on safe setting quite well..
the CPU temperature is well managed in around 35'ish Celcius compared to 45'ish when not using any air conditioner...
Click to expand...
Click to collapse
CPU temperature 35 Celsius degrees? Are you talking about an ABSOLUTE idle? Because even if you would put a bag of ice on the TAB it wouldn't sit that low under usage. Even small loads will put the CPU around 50-60 Celsius degrees. Under heavy load up to 85-90 till the thermal throttle hits in.
Also, that ONE wildlife mark test doesn't do much. The idea is stability, better known as SUSTAINED performance, and that's where SD8 Gen 1 ****s itself. Try running a Wildlife standard stress test (20-minute loop) and post the screenshot, you'll see what I mean.

ekin_strops said:
CPU temperature 35 Celsius degrees? Are you talking about an ABSOLUTE idle? Because even if you would put a bag of ice on the TAB it wouldn't sit that low under usage. Even small loads will put the CPU around 50-60 Celsius degrees. Under heavy load up to 85-90 till the thermal throttle hits in.
Also, that ONE wildlife mark test doesn't do much. The idea is stability, better known as SUSTAINED performance, and that's where SD8 Gen 1 ****s itself. Try running a Wildlife standard stress test (20-minute loop) and post the screenshot, you'll see what I mean.
Click to expand...
Click to collapse
I only saw the perf-z indicator from samsung though.. so yeah.. i know i might just straight up wrong about this I just straight saying what I saw.. and honestly I'm not an expert in this.. just a mere consumer..
Yeah I got you.. it goes downhill even after the first one.. what I'm trying to say was that I never reach that score before in warm room so yeah it's mainly the CPU problem..
What mainly being my concern before was I'm scared that I got scammed with a fake/unoriginal/refurbished tab s8.....

Harry Potter plays fluently on Tab S8 Plus here.

I have sent my S8 to my mom and bought S8 plus. Did not restore, set it up from scratch. No lagging in games, including HP. So, it could be related to thermal soliton in S8 plus as it is bigger

Bege21 said:
First.. thank you for the answer! Might try it out later..
So it's like disabling the "GOS" right? Is it different from the "alternate game performance" option in game booster? They said it's the "official" way to disable the GOS.. but yeah I didn't find any difference after enabling that option though... Hmm..
Hmm...also.. What makes me wonder is.. I saw some reviewers review this device without any tweaking needed and they could achieve a 8gen1'ish results in benchmarks.. and also if you know ETA prime on YouTube.. he reviewed a tab s8 ultra and is able to run a granturismo 4 with aethersx2 (ps2 emulator) in 3x reso in default settings with no problems... I know it's a different device but it's supposed to have a same Chip right?
All of this things makes me frustrated because it was not what i expected from a 8gen1 device.. moreover I saw a sd870 device could run the granturismo 4 in the same settings with no problems.. it really broke my heart..
Click to expand...
Click to collapse
Yes you have to run 4 adb Commands that also disables game booster and game launcher then GOS will stay disabled even after restart. I've done this and turn ram plus off. I also disabled or put into deep sleep all of the bs apps. I also went to advance features and turned off all of everything causes I don't use the s-pen so no need for air actions and stuff to be on. If you want the ADB commands let me know.