If so, what type?
Doubtful. With an amoled screen, they're probably going to implement some sort of active notifications. And if you look at the photos, there's nothing standing out on the bezels...
Being that the notification LED is a requirement of the Nexus program (just like wireless charging) it will most certainly have one built in. The Nexus 5 also had no mention of the notification light on its spec page but alas, it did have it.
Dear god I hope so. I am not a fan of the moto x style of active display for notifications.
Man I hope so, it's the one thing about Samsung phones I love. I don't understand why more manufacturers don't do it like that.
All nexus before (except the nexus s) had had one. /crosses fingers
I'd rather have notification LED.
I really enjoyed this feature on my old Moto Dual G.
Not like the screen used bike in moto x
what about this?
http://youtu.be/wk-PY2dBKaA?t=12s
areon said:
what about this?
http://youtu.be/wk-PY2dBKaA?t=12s
Click to expand...
Click to collapse
That thing at the top? I assumed that was an ir blaster or something along those lines. But who knows. I think that would be an awkward place for a notification light. Bit it's better than nothing of that's what it is.
That looks like a sim tray to me...
NextNexus said:
Being that the notification LED is a requirement of the Nexus program (just like wireless charging) it will most certainly have one built in. The Nexus 5 also had no mention of the notification light on its spec page but alas, it did have it.
Click to expand...
Click to collapse
Guess not
http://www.phonedog.com/2014/10/20/...llphoneblog+(PhoneDog.com+Cell+Phone+articles)
frigidazzi said:
That thing at the top? I assumed that was an ir blaster or something along those lines. But who knows. I think that would be an awkward place for a notification light. Bit it's better than nothing of that's what it is.
Click to expand...
Click to collapse
Tidbits said:
That looks like a sim tray to me...
Click to expand...
Click to collapse
They were talking about this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not too sure on it. Might just be a minor design concept. The top of the phone will have the 3.5mm headphone jack and that little hole is indeed for the SIM tray slot much like the iPhone.
NextNexus said:
Being that the notification LED is a requirement of the Nexus program (just like wireless charging) it will most certainly have one built in. The Nexus 5 also had no mention of the notification light on its spec page but alas, it did have it.
Click to expand...
Click to collapse
Oh man that would be awesome. Would really be a huge plus if it turned out that way.
Pretty sure I was wrong. Using active notifications (or whatever it's called now) instead.
What about a charging indicator? Would the Active Display/Ambient Display notify you of a full/charging battery?
damn that sucks if true
Sent from my Note 4
frigidazzi said:
That thing at the top? I assumed that was an ir blaster or something along those lines. But who knows. I think that would be an awkward place for a notification light. Bit it's better than nothing of that's what it is.
Click to expand...
Click to collapse
brian117 said:
They were talking about this:
Not too sure on it. Might just be a minor design concept. The top of the phone will have the 3.5mm headphone jack and that little hole is indeed for the SIM tray slot much like the iPhone.
Oh man that would be awesome. Would really be a huge plus if it turned out that way.
Click to expand...
Click to collapse
I see. That doesn't look like that would be a notification light to me.
Tidbits said:
I see. That doesn't look like that would be a notification light to me.
Click to expand...
Click to collapse
That band? That's for signal reception.
That's exactly what I thought it was.
brian117 said:
They were talking about this:
Not too sure on it. Might just be a minor design concept. The top of the phone will have the 3.5mm headphone jack and that little hole is indeed for the SIM tray slot much like the iPhone.
Oh man that would be awesome. Would really be a huge plus if it turned out that way.
Click to expand...
Click to collapse
That's a break in the metal band around the phone. There's 2 at each corner, 8 total. Its how Motorola uses their software to redirect the antenna to parts of the phone that aren't being gripped, to avoid atennagate lol
frigidazzi said:
That thing at the top? I assumed that was an ir blaster or something along those lines. But who knows. I think that would be an awkward place for a notification light. Bit it's better than nothing of that's what it is.
Click to expand...
Click to collapse
Dude, tats sim tray
---------- Post added at 11:30 AM ---------- Previous post was at 11:28 AM ----------
brian117 said:
They were talking about this:
Not too sure on it. Might just be a minor design concept. The top of the phone will have the 3.5mm headphone jack and that little hole is indeed for the SIM tray slot much like the iPhone.
Oh man that would be awesome. Would really be a huge plus if it turned out that way.
Click to expand...
Click to collapse
Tat's the antenna for receiving signals
Related
I made this dock/nightstand for my droid incredible. I would show you how good it looks with the phone in it, but I used my phone to take the picture.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LOL it kinda looks like monument on Droid cemetery. RIP DInc
Great job regardless, a lot of attention to details. But picture is epic fail - get another phone/camera and take a picture with phone in.
Really?
I shared what I had built as it was at the moment. Isn't that what this developer's forum is all about? Perhaps you can help us all out and run over to every thread where someone has posted a beta, alpha, or nightly and let them know that they have an epic fail for not making sure it was not needing any more development before they posted it.
dltccf said:
I shared what I had built as it was at the moment. Isn't that what this developer's forum is all about? Perhaps you can help us all out and run over to every thread where someone has posted a beta, alpha, or nightly and let them know that they have an epic fail for not making sure it was not needing any more development before they posted it.
Click to expand...
Click to collapse
they do not represent xda in any way.
i like how it looks but what about heat? does it get hot in there? looks sick. reminds me of my wood shop days.
dltccf said:
I shared what I had built as it was at the moment. Isn't that what this developer's forum is all about? Perhaps you can help us all out and run over to every thread where someone has posted a beta, alpha, or nightly and let them know that they have an epic fail for not making sure it was not needing any more development before they posted it.
Click to expand...
Click to collapse
ouch...... lol
synisterwolf said:
they do not represent xda in any way.
i like how it looks but what about heat? does it get hot in there? looks sick. reminds me of my wood shop days.
Click to expand...
Click to collapse
So far heat is OK. although I haven't tried watching a movie on it in the dock yet.
dltccf said:
So far heat is OK. although I haven't tried watching a movie on it in the dock yet.
Click to expand...
Click to collapse
It would be interesting to hear how hot it gets. even in my old otter box case the thing use to cook. i can imagine wood. but never the less it looks awesome. great work.
Nice job man! Love the black carved out Androids!
That's pretty awesome. I'd be too afraid of the heat though. Still great build nonetheless.
Good job on the dock. It's pretty cool...you even got a little notch for the camera on the droid inc.
I wish I was half as creative and handy as you. Very nice job!
That's pretty cool! I actually cruised over here to see if anyone made their own dock recently.
finally
Finally got around to taking a picture of the dock with the phone in it. The display is the "night display" from Gentle Alarm. In the background, you can even see part of the landline and the alarm clock made not necessary by the phone in the dock.
wow over 1600 views
I just looked at this thread and realized over 1,600 people have looked at my dock. Wow. I have been using it for several months as an alarm clock in the dock every night and so far no heat issues. It has been working out very well. After seeing how many people were interested in a dock I think I should have offered to make and sell them. I still could, but I imagine the market for a new dock for this old phone is dwindling.
I would buy one. Red androids please.
Comicazy said:
I would buy one. Red androids please.
Click to expand...
Click to collapse
Ok, if you want one I can make one. I wouldn't expect to be making very many of these so each one could be customized. That one was made in pine which I stained with a pecan stain. I have since come across some walnut boards. I could make one in walnut which would look much better than pine. If you want some other type of wood I can see about getting some. I used a micro to standard USB cable which allows me to either plug it into the computer or into the standard dinc AC adapter. I can also change the design with more or less androids, your name or some completely different design, even a square or sculpted top rather than a round one.
If something in the neighborhood of 50 bucks is in your price range let me know along with any specifics of the design you want.
And, of course, for everyone elses' enjoyment I can post a picture here when it is done.
How do you have your usb plug secured in there? I've been trying to come up with a design for one of my own since I always use my phone as my alarm clock, but I've not come up with a good way to get the plug to stay in place so that the phone can be plugged in easily.
"Haus" said:
How do you have your usb plug secured in there? I've been trying to come up with a design for one of my own since I always use my phone as my alarm clock, but I've not come up with a good way to get the plug to stay in place so that the phone can be plugged in easily.
Click to expand...
Click to collapse
I placed the phone in the holder then I plugged the usb connector into it through the other hole I had cut for it. Then I put some gorilla glue around the plastic part of the plug being careful to keep it away from the end. Gorilla glue expands and fills the space around the plug. I lightly clamped the phone in place overnight, but a couple hours should be enough, and then when I removed the clamp, the plug is secured in place exactly where it needs to be.
Cool idea, looks great!
JoeSchmoe007 said:
LOL it kinda looks like monument on Droid cemetery. RIP DInc
Great job regardless, a lot of attention to details. But picture is epic fail - get another phone/camera and take a picture with phone in.
Click to expand...
Click to collapse
Aha, I had that same thought as well!
So I was out shopping with my wife and came across this. Thought it was pretty cool so I decided ti get it. Problem is that the base part won't fit the phone because it's too small. I'm trying to find a way to have it fit but not sure where to begin. .. any ideas? I(t's a Hype retro handset, but also included the base (or dock), which is where the issue is...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I really like the handset part. Just had a 3 hour long conversation with my dad and it was onky toward the end that my ear started to hurt a little lol.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
what is it?
It is a retro styled device that turns your phone into a 80's style desk phone. You can either rest your phone in the base part (or dock) and connect it through the supplied 3.5mm jack or you can use the handset piece separate and also plug just that part into the 3.5mm jack.
Here I thought I was bad taking pictures :laugh:
Guess its cute but how practical is it
IamPro said:
Here I thought I was bad taking pictures :laugh:
Click to expand...
Click to collapse
It's probably just the lighting in my man cave lol.
IamPro said:
Guess its cute but how practical is it
Click to expand...
Click to collapse
It's something I could definitely see using at home. I had the phone in my front pocket and the handset hooked into the jack and was able to use it with no issues. The handset also has its own volume adjustment which is nice. That said, it's probably not for everyone...
It might look a bit strange carrying around the handset piece and using it in public hehe. For a relatively older guy like me (I'm 36), I grew up with these kinds of phones so it definitely appeals to me.
My sister in law just got herself the handset piece (you can buy it separate) and she likes it too.
The base (dock) will accomodate most other phones. But the Note 2 is too wide to fit the opening... so I'm trying to think of ways to either make it fit or some other solution..
Maybe this pic will help clarify...
That's my wife's Galaxy S3 in there..
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
damn funny!
Any eBay link?
diehardbattery said:
So I was out shopping with my wife and came across this. Thought it was pretty cool so I decided ti get it. Problem is that the base part won't fit the phone because it's too small. I'm trying to find a way to have it fit but not sure where to begin. .. any ideas? I(t's a Hype retro handset, but also included the base (or dock), which is where the issue is...
I really like the handset part. Just had a 3 hour long conversation with my dad and it was onky toward the end that my ear started to hurt a little lol.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Where'd you get it?
Sent from my SPH-L900 using xda premium
I quick searched ebay but couldn't find the exact device.
The closest one I could find (and really nice imo) is this http://www.ebay.com/itm/Antique-Ret...256356?pt=PDA_Accessories&hash=item4abf12bda4
I think it'll work on our phones, my only question is about that port on the back side that looks like a typical phone line port. I'm not sure what is it for, plus I cannot figure out whether the device actually charges the phone too..
jdyowa said:
Where'd you get it?
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
I got it at Bed Bath and Beyond. Funny because they don't list it on their website either. The closest thing they have listed is the handset piece itself.. http://www.bedbathandbeyond.com/product.asp?SKU=40088341&RN=2017&KSKU=203210&
Here's a couple box shots...
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
stormrain said:
I think it'll work on our phones, my only question is about that port on the back side that looks like a typical phone line port. I'm not sure what is it for, plus I cannot figure out whether the device actually charges the phone too..
Click to expand...
Click to collapse
There is one 3.5mm female jack on the left side of the device that the handset connects to. The handset can either be connected to that, or you can connect it directly to the phone's 3.5mm jack. If you connect the handset to the device, there is a male 3.5mm jack that is used as a passthrough for the handset to connect to the phone. At the bottom of the device the hole you see is to pass a cord for a wall charger, so no, the device itself won't charge your phone. Hope that clears things up a bit.
I have one of the original N4's when they were released, yellow screen and defective charger. I got an RMA N4 and it looks like they added little nubs to the bottom. Just an FYI
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What hardware revision? Boot in bootloader mode and give us the infoz!
It's nothing major. But the back plate can somewhat be more easier to remove.
And which country?
Sent from my iPad using Tapatalk HD
I have the same. Rev11,France.
Sent from my Nexus 4 using xda premium
Is it just me or is the headphone jack next to the speaker grill in this photo?
Its the bottom.screw aint it?
Sent from my Nexus 4 using xda premium
Interesting touch, and very smart actually given how many people had their backs crack just from temperature variations on whatever surface they put their Nexus 4 down on. Hopefully that lifts the glass off any surface a bit. Flip side is that looks like it'd be a fitment problem for most cases on the market already.
It's not to cool down the glass, is to keep free the sound from the speaker that was getting blocked when you had the device on a flat surface.
Sent from my N4
yulasinio said:
It's not to cool down the glass, is to keep free the sound from the speaker that was getting blocked when you had the device on a flat surface.
Sent from my N4
Click to expand...
Click to collapse
i dont think theyd change the desing for that. not worth it.
zakoo2 said:
i dont think theyd change the desing for that. not worth it.
Click to expand...
Click to collapse
They probably have a whole variety of reasons. IMO raising the speaker off flat surfaces would be a perfectly good reason because it's completely muffled when you put the phone down on its back. They wouldn't change the hardware just for that, but it'd certainly help.
whistlerGreg said:
Is it just me or is the headphone jack next to the speaker grill in this photo?
Click to expand...
Click to collapse
Thats true.. Dafaq?
That minor change could affect some cases. Well, maybe not.
Nathtech said:
Thats true.. Dafaq?
Click to expand...
Click to collapse
Nope, that's the torque screw on the bottom of the phone. It just looks quite big in the photo.
I have hardware rev. 11 and don't have that on mine!!
- sent from my Nexus 7
I'm going with the speaker thing, seems obvious. Now I wish mine had that..
Nigeldg said:
Nope, that's the torque screw on the bottom of the phone. It just looks quite big in the photo.
Click to expand...
Click to collapse
Torx screw you mean.
And going back on topic, if the phone is flat on the table the gap could increase air flow for better cooling and increase the volume too.
Its REV 11, Production date 02/2013 made in Korea. i'm in the US and It still fits perfectly fine in the LG Bumper. The photo is little confusing it was taken with my original N4 with a macro lens. the hole is the torx screw on the bottom.
Awesome! I ordered an RMA last night, should be receiving it sometime this week.
My Nexus 4 died on me Sunday night. Red light of death
Watch as dozens of people cry about their phones not having this, and then come up with excuses why they need to rma their device.
A place for us US people to ramble on about the Google Nexus 5!
Here's a plan option you can do that will save a lot of people a decent amount of money http://forum.xda-developers.com/sho...rking on prepaid AT&T tablet dataconnect plan
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Consider this an official warning to anyone posting negative, off-topic, or IB4L posts, as there will be consequences.
Thank you
Gota say I know a lot of people come down kinda hard on the big camera lens but I kinda like the look.
Cronis said:
Gota say I know a lot of people come down kinda hard on the big camera lens but I kinda like the look.
Click to expand...
Click to collapse
I agree with you. My biggest concern is that tiny little earpiece though. Thoughts?
My concern is camera quality. I know it won't be the best but I hope it's way better then the N4
Sent from my GT-I9505G using Tapatalk
---------- Post added at 02:47 PM ---------- Previous post was at 02:46 PM ----------
ctowne said:
I agree with you. My biggest concern is that tiny little earpiece though. Thoughts?
Click to expand...
Click to collapse
Meh not a bit deal to me for now. Need to see it in person. Won't stop me from buying though
Sent from my GT-I9505G using Tapatalk
Yeah the Nexus 4 camera was not that good.. It's good but the terrible auto focus kind of kills it.
ctowne said:
I agree with you. My biggest concern is that tiny little earpiece though. Thoughts?
Click to expand...
Click to collapse
Hard to say, its circular as opposed to long and slender like on most phones. I think a lot will depend on the audio hardware they use, which is kind of an unknown.
its right up there with camera quality, we wont know how good it is till we use the phone.
Cronis said:
Hard to say, its circular as opposed to long and slender like on most phones. I think a lot will depend on the audio hardware they use, which is kind of an unknown.
its right up there with camera quality, we wont know how good it is till we use the phone.
Click to expand...
Click to collapse
I just feel like with that tiny little hole you will have to have it perfectly placed in your ear to hear anything. I'm sure that can't be the case though.
ctowne said:
I just feel like with that tiny little hole you will have to have it perfectly placed in your ear to hear anything. I'm sure that can't be the case though.
Click to expand...
Click to collapse
Cant think of any smartphones that use a small circlular ear piece off the top of my head... would be curious to get my hands on one or see reviews just to see if its an issue.
Cronis said:
Cant think of any smartphones that use a small circlular ear piece off the top of my head... would be curious to get my hands on one or see reviews just to see if its an issue.
Click to expand...
Click to collapse
Yeah me too.
I don't understand why they made the "chin" so big either.
ctowne said:
Yeah the Nexus 4 camera was not that good.. It's good but the terrible auto focus kind of kills it.
Click to expand...
Click to collapse
Exactly the autofocus was the main issue
>^.^< Sent From Meow HTC One
ctowne said:
Yeah me too.
I don't understand why they made the "chin" so big either.
Click to expand...
Click to collapse
probably some internal components location relative to the screen or other significant part (battery, radio etc), as a prototype engineer/machinist I see compromises like that made all the time. The fact that they got a 5" screen into a frame smaller then the N4 is pretty significant and was probably due to a few design/construction compromises.
Cronis said:
probably some internal components location relative to the screen or other significant part (battery, radio etc), as a prototype engineer/machinist I see compromises like that made all the time. The fact that they got a 5" screen into a frame smaller then the N4 is pretty significant and was probably due to a few design/construction compromises.
Click to expand...
Click to collapse
This is very true, good point :good:
It's still pretty amazing they fit a bigger screen in the same size as the 4 :highfive:
DowntownJeffBrown said:
Exactly the autofocus was the main issue
>^.^< Sent From Meow HTC One
Click to expand...
Click to collapse
That was one thing I kinda didn't like about the stock Moto X camera app. Instead of touching to focus, it is touch the focus+shoot. It confused me.
ctowne said:
That was one thing I kinda didn't like about the stock Moto X camera app. Instead of touching to focus, it is touch the focus+shoot. It confused me.
Click to expand...
Click to collapse
Haha yea I can see where that would happen
>^.^< Sent From Meow HTC One
I like the chin on phones.. especially when they dont have the home/back/menu buttons on them. gives me a place to hold when im holding it sidways to take pictures..that way my hand wont touch anything before i actually want to take the shot..also, a phone without a chin would be a bit ugly in my honest opinion. Loving the form factor of this phone, all except for the lens..but hey, its a nexus, cant complain when its 200+ dollars cheaper than most phones off contract.
Johann12911 said:
I like the chin on phones.. especially when they dont have the home/back/menu buttons on them. gives me a place to hold when im holding it sidways to take pictures..that way my hand wont touch anything before i actually want to take the shot..also, a phone without a chin would be a bit ugly in my honest opinion. Loving the form factor of this phone, all except for the lens..but hey, its a nexus, cant complain when its 200+ dollars cheaper than most phones off contract.
Click to expand...
Click to collapse
You make a very great point. I wouldn't want "no" chin, but the N5 (based on the short lived play store photo) is definitely better than the chin on other phones I've had.
If anyone would like to join our Nexus 5 hangout just PM me your gmail :victory:
ctowne said:
If anyone would like to join our Nexus 5 hangout just PM me your gmail :victory:
Click to expand...
Click to collapse
hangout for what?
mayhem85 said:
hangout for what?
Click to expand...
Click to collapse
Talk about phones and such. A google hangout
Hi all,
I recently aquired a used Z1 and wanted to check if it is indeed only "1 Month old".
Is there a possibility to check this? Somewhere in the firmware or with a serial# etc?
Regards
user
user822 said:
Hi all,
I recently aquired a used Z1 and wanted to check if it is indeed only "1 Month old".
Is there a possibility to check this? Somewhere in the firmware or with a serial# etc?
Regards
user
Click to expand...
Click to collapse
Look for this Number at the back side somewhere in smallish letters:-
Inside the micro sd card slot will be a sliding sticker. use your long nails or a pointed screwdriver whatever, to pull it out
14W15 (as an example) that will be 2014 week 15
Thanks
14W04 (on the FCC sticker)
I bought it in September, so it makes sense, thanks for telling me.
Also it had 103 charge cycles on the battery, that also might work with 3 months (~90 days).
whoami_amiu said:
Look for this Number at the back side somewhere in smallish letters:-
Inside the micro sd card slot will be a sliding sticker. use your long nails or a pointed screwdriver whatever, to pull it out
14W15 (as an example) that will be 2014 week 15
Thanks
Click to expand...
Click to collapse
Would you be able to provide a photo of the 'sliding sticker'? I'm not finding it.
I'd rather not remove the back plate to view the info sticker unless I really have to.
ExtraBasher said:
Would you be able to provide a photo of the 'sliding sticker'? I'm not finding it.
I'd rather not remove the back plate to view the info sticker unless I really have to.
Click to expand...
Click to collapse
http://support.sonymobile.com/global-en/xperiaz1/userguide/IMEI-number/
Here you go with some snaps
ExtraBasher said:
Would you be able to provide a photo of the 'sliding sticker'? I'm not finding it.
I'd rather not remove the back plate to view the info sticker unless I really have to.
Click to expand...
Click to collapse
Only got an HTC one m7 around in the office so sorry for picture quality.. .
And sorry it was not the memory card flap, it is ACTUALLY THE SIM CARD FLAP WHERE THE DETAIL SLIDER IS HIDDEN - take a look:-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
:good::good::good:
user822 said:
http://support.sonymobile.com/global-en/xperiaz1/userguide/IMEI-number/
Click to expand...
Click to collapse
whoami_amiu said:
Only got an HTC one m7 around in the office so sorry for picture quality.. .
And sorry it was not the memory card flap, it is ACTUALLY THE SIM CARD FLAP WHERE THE DETAIL SLIDER IS HIDDEN - take a look:-
Click to expand...
Click to collapse
I wonder why Google didn't show me that info page in the first place when I searched. Heh. Thank you, both, for helping me out on this. I almost hard the darnedest time seeing it.
Looks like this device was built in late week 40 of 2013, although it was only unboxed earlier this month - as mentioned by it's previous owner. Though somehow I doubt that because the left loud speaker was inoperable, unless that was a manufacturing defect...
ExtraBasher said:
I wonder why Google didn't show me that info page in the first place when I searched. Heh. Thank you, both, for helping me out on this. I almost hard the darnedest time seeing it.
Looks like this device was built in late week 40 of 2013, although it was only unboxed earlier this month - as mentioned by it's previous owner. Though somehow I doubt that because the left loud speaker was inoperable, unless that was a manufacturing defect...
Click to expand...
Click to collapse
Sorry for replying this late, but you're somehow mistaken on the left speaker thingy
Our Z1 only has one LOUD-speaker on the bottom righest area. Though you can turn on the upper speaker as well with a mod also available on XDA. I have been using it and the mono quality speakers have become stereo; without a doubt a must thing
whoami_amiu said:
Sorry for replying this late, but you're somehow mistaken on the left speaker thingy
Our Z1 only has one LOUD-speaker on the bottom righest area. Though you can turn on the upper speaker as well with a mod also available on XDA. I have been using it and the mono quality speakers have become stereo; without a doubt a must thing
Click to expand...
Click to collapse
My rooted-stock ROM has dontbelive's stereo mod cooked-in, but only the other day did I come to realize what you just mentioned there. I knew what the mod did, though somehow it escaped me why I had it. It can take /considerable/ time for things to click. Silly me!
But hey, good to point that out anyway! I'm sure it'll be notable for future reference