Q&A for [ROMS][SGH-T679]Mass CM Thread
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
I noticed that the kernels are linked separately from the ROMs. Am I supposed to download and flash the kernels separately? I've flashed about half a dozen ROMs, but I've never flashed a kernel before. From what I've read, though, it sounds like following the same procedure. How about GApps? Do I need to download and flash those, too? And, if so, which pack should I use?
fajrero said:
I noticed that the kernels are linked separately from the ROMs. Am I supposed to download and flash the kernels separately? I've flashed about half a dozen ROMs, but I've never flashed a kernel before. From what I've read, though, it sounds like following the same procedure. How about GApps? Do I need to download and flash those, too? And, if so, which pack should I use?
Click to expand...
Click to collapse
Roms come with a kernel the kernel linked is just special some have overclock under volt etc etc.
Explains the kernel options.
If you do flash them do it after rom.
Gapps you dont technicly have to but yes. (for a standard setup flash gapps)And there should be a gapps linked at the start of rom. If not there will be soon.
Can't import contacts from SIM
Thanks! That clears up a lot.
I installed CM, and it looks very cool and smooth. But when I tried to import contacts from my SIM card, it said "No contacts". I thought maybe it was because I hadn't installed GApps, so I downloaded the "small" GApps package linked from the CM wiki and installed it from CWM. Still no contacts on the SIM card. Next, I thought that maybe my contacts actually weren't on my SIM for some reason. So, I booted back into CWM recovery and restored my previous system. Then, from the phone app, I went to Import/Export > Manage SIM card contacts. Sure enough, all of my contacts were there.
It seems like CM isn't reading my SIM. Any idea what's causing this?
Edit: Never mind. I found out that newer versions of Android don't allow you to store contacts locally. Somehow, the contacts got silently added without me having to import them, though. That's odd, because I don't remember allowing Google to store them in the cloud, and the SIM card appears blank... Oh, well, I installed MyLocalAccount, so I'll see if I can store the contacts locally that way.
@cars1189 running 10/18 build with 10/19(PAgapps micro) and 9/9k^k UV vhm kernel and have had no issues! Thanks for the great work, this runs solid and smooth!
I recently installed 10.2 and am loving it so far. One thing I ran into though was that the cLock widget was showing lots of wakelocks, so I disabled it and battery life has been great. Haven't run into any other issues (other than the screen staying on when off and charging), so this one is a keeper for me.
Didn't see this problem with 10.1, so curious if this is a known issue or not with the cLock widget? Also, are there any other planned updates coming for 10.2?
Thanks.
@RobbyG2112 I noticed it too when I was on 10.2 how ever I only ran it for a week maybe b4 going to cm11 I will say not sure if cars will update 10.2 but if you haven't tried cm11 its super stable and gets updated monthly!!
Thanks for confirming canodroid15, I wasn't sure what the lock screen would show when I disabled the widget but it put the default digital clock and date in it's place so it works out ok. I had disabled the weather and alarm widgets also so wasn't sure why having only the clock widget would cause wakelocks.
I'll probably get around to installing CM11 next, I'm a little slow on upgrading. I had been using CM10 for a long time and finally got tired of seeing the green preview pictures every time I used the camera so decided to go to CM10.1/10.2 recently.
Sure man, about the wakelocks you can try to catch it in a log. Enjoy 10.2 bro!!
kernel for cm11 (SGH-T679)
I recently installed @cars1189's CM11 10-4-14 build for the SGH-T679, with kernel 3.4.104-cyanogenmod-gda4bf58. It took a few tries, but it finally succeeded.
However, there's a slight issue in that I can't access my SIM card contacts. When I try to import from the dialer, it says "no contacts." I've searched around these threads and on the internet, and it seems that it is an issue with the kernel. Would it be possible for someone to recommend or point me to a compatible kernel that would fix that issue for me? Thank you so much for your help!
@valmeras I really don't think it has anything to do with the stock cm kernel but if your on 10/4/14 you can flash 9/9k^k kernels safely on that build about sim contacts idk I use my Google account to sync my contacts hope this helps good luck!
Edit: look for the rom & kernel dates/links in OP.
@canodroid15 - thanks for the response and suggestion. I'll give that kernel a try in the next few days. Not sure this is the solution, but hopefully that works. I've also seen some reference to SIM Tool Kit (STK), but I wasn't able to figure out if it that was the issue.
I would definitely use Google for syncing the contacts once I get this fixed, but for now, that's not possible because my phone is not able to read the SIM properly. I've tried saving a contact to the SIM, but I get an error like "unable to write, SIM is full" but I know for sure that's not the case. Alternatively, I might try to revive my old dumb phone and try to retrieve the contacts that way, then hopefully export that in some way.
@valmeras no prob man, if you have contacts on your sim and u put the sim in the dumb phone and export to storage u could then send a vcard via Bluetooth to the exhibit go into contacts and import from storage then Google sync good luck let me kno if u get it
So I flashed the kernel, but that didn't fix my issue. I do have some more free RAM now though
My old phone doesn't support exporting multiple contacts/vcards via bluetooth, but fortunately, Motorola has a contact exporter utility that exported everything into a CSV file to my laptop via USB. I had to install the drivers for the old phone to be recognised first. I was skeptical it would work given it was a new all-in-one driver thingie and my Motorola was quite old, but somehow it did! The whole process took several hours, but my contacts are now synced!
Sensors/rotation problem
Thanks for posting these ROMs! I just upgraded from Peach Sunrise and I'm really impressed with how well CM11 runs on this phone.
I want to report a problem I had and my solution for the next guy's benefit. With the latest 12-9-14 CM11 ROM, my sensors and compass didn't work correctly. The biggest symptom was auto-rotation did not work at all. Downgrading to the 9-9-14 ROM fixed everything. I didn't try any other ROMs, so they might work too.
Question about getting Google apps running on a SGH-T679
I installed CM 10.2 (cm-10.2-20140627-UNOFFICIAL-ancora_tmo) and it worked fine. I tried a couple different gapps downloads (doing a reinstall of CM10.2 between tries although I may have done that step incorrectly). But no matter what 4.3 gapps build I tried, Google Play Services would crash.
My main goal is to get to 4.3 or higher, so CM 10.2 or CM 11 would be great. (I'm open to other ROMs too. The only reason I'm choosing CM is because those are the only ROMs indicated as still maintained here: http://forum.xda-developers.com/wiki/Samsung_Galaxy_Exhibit_4G )
My question is whether anyone has either CM version running on a T679 and which gapps did you use? I nearly bricked my phone and would like to know that someone else has gapps running okay before I try again.
Thanks!
EDIT: I followed the 2 following threads to install CM 11 with the PA pico gapp package and added a few other Google apps manually from the Play store. I also made sure to reboot several times to make sure everything got fully initialized.
http://forum.xda-developers.com/showthread.php?t=2542793
http://forum.xda-developers.com/showthread.php?t=2397942
masteff said:
Question about getting Google apps running on a SGH-T679
I installed CM 10.2 (cm-10.2-20140627-UNOFFICIAL-ancora_tmo) and it worked fine. I tried a couple different gapps downloads (doing a reinstall of CM10.2 between tries although I may have done that step incorrectly). But no matter what 4.3 gapps build I tried, Google Play Services would crash.
My main goal is to get to 4.3 or higher, so CM 10.2 or CM 11 would be great. (I'm open to other ROMs too. The only reason I'm choosing CM is because those are the only ROMs indicated as still maintained here: http://forum.xda-developers.com/wiki/Samsung_Galaxy_Exhibit_4G )
My question is whether anyone has either CM version running on a T679 and which gapps did you use? I nearly bricked my phone and would like to know that someone else has gapps running okay before I try again.
Thanks!
EDIT: I followed the 2 following threads to install CM 11 with the PA pico gapp package and added a few other Google apps manually from the Play store. I also made sure to reboot several times to make sure everything got fully initialized.
http://forum.xda-developers.com/showthread.php?t=2542793
http://forum.xda-developers.com/showthread.php?t=2397942
Click to expand...
Click to collapse
Hey man! I hope you got it figured out! The only Gapps I use are PA Gapps! There are others but PA is the most complete package & has many options "IMO". You need to use a package that will fit your phone I use the micro package, or the nano. You need to use a package that matches your ROMs version, if your on 4.4.x then use 4.4.x Gapps. If on 4.3 use 4.3 Gapps. PA Gapps has a 4.3 package but its hard to find if you don't know where to look. 4.3 package can be found in the devs (Tkruzze) files on android file host, same place as the 4.4.x Gapps! Sorry if you didn't get answered b4 this I haven't been on this thread for weeks it seems! Hope this helps
So I've been trying out the CM11 OS2SD ROM (the last one in December), but I need to switch back as the bugs are just too much. I need my phone to work and stay charged, which is not happening on this ROM. And since it looks like CM12 is being worked on now that it's not likely the bugs in CM11 OS2SD will get fixed any time soon.
So first the problem. My USB socket on the phone is a little iffy, so I know that is where most of the problem is coming in. However, on the CM11 OS2SD ROM I'm using right now (the one dated 12/25) it frequently says it is plugged in, but is not charging. I've actually seen times where the battery monitor I'm using shows it has discharged the battery as much as 20% before I caught it, yet the status bar battery icon shows it as full and plugged in. On the older ROMs it didn't do this, so something isn't right with how the ROM handles the charging circuits in the phone. Plus, I've had frequent periods of "cpu hogging" (massive CPU load that doesn't seem to come from any one source and that doesn't seem to show up in OS Monitor) that can end up in a crash-reboot of the phone.
So as a result, I want to switch back to an older version of the CM11 ROM. I was using one of the November builds for quite a while, only having to put up with an occasional crash-reboot (the current ROM seems to do this at least every other day, the older one could go a whole week and maybe have it happen only once). What is the process to undo what was done to the phone for the OS2SD build to be loaded?
can't install
I have a problem after installing it via cwm and rebooting, the ensender shows me a screen where I order a factory reset but when I was I do not ensiende the phone
CM 12 Android is upgrading every boot
Ever since I flashed Cyanogenmod 12 every time I reboot it says "android is upgrading optimizing app 1 of 1" and it takes about 8 minutes. There are no odex files in data/app so that cant be the problem. Someone please help. The first time I flashed CM 12 I wiped data and factory reseted but since i seen this happen I flashed Cm 12 again but this time I formatted System, Data, Boot, and SDcard 0 but it still seems to happen. Also, recently my phone has been shutting off by itself every time I turn off the screen. And I know this isn't a hardware problem because the phone never turns off while music is playing with the screen off. It didn't start happening with CM 12. It was already happening with CM11 but it only started happening about a week ago. Im really thankful for cars1189 working on the rom and anyone else who worked on it. You guys are great. Hopefully you can help me out.
Related
I'm sorry if this has been posted and/or answered elsewhere. I have been looking for the past 48 hours for answers; attemping most of what I've found with no luck.
Hello XDA users/developers. A few days ago I unlocked the bootloader on my Xperia T. I've had my device rooted for about a month and decided to take the next step since I know how large the 'modding' community is within Android.
My phone, as you're probably aware came preloaded with Sony's bloatware. After freezing them with Titanium I decided to install Cyanogen Mod 10 to eliminate them. I've unlocked the bootloader via the official Sony method and installed CM & CWM with no issues.
ADB/Fastboot drivers are not an issue, neither is my copy of the Android SDK.
Now comes my problem; I've noticed many people have the 'No Service' issue. I've searched top to bottom, read all the results and it seems my problem doesn't quite fit.
My IEMI number has not changed
The baseband did change, however I've copied over the files from my stock ROM to CM
I've triple checked the APN list and there isn't an issue there
I CAN receive/send phone calls and SMS. And my data connection runs just fine.
I've tried to install other custom ROMs such as Paranoid Android with no luck. It seems stock Sony ROMs work while custom ROMs don't.
I've reflashed my stock 4.1 with flashtool and I do gain service once again. This is the same if I install another Sony ROM, such as 4.0.
I've searched XDA and other resources; I have found results though not for the T. I'm skeptical whether these methods for other phones will work and have not tried them myself.
One thing left that I haven't checked is whether I'm SIM locked. I've tried *#SIMLOCK# on both CM and Stock with no results. I am NOT simlocked.
I also have not tried flashing another Kernel since CM/CWM/FXP installed its own - I assume this is alright and not the cause of the problem.
Also CM is convinced the preferred network type is WCDMA; stock displayed WCDMA or GSM. So I'm going to go with the fact that WCDMA preferred is alright and not part of the problem.
My Xperia T is on the T-Mobile/EE UK network. I don't have another SIM or phone to test with right now.
During work the day after flashing CM my phone did mention "EE" instead of "No Service" for about 10 minutes. I'm hoping that all hope isn't lost!
I can provide relevant screenshots/logs/answers if that'll help troubleshoot.
Any ideas?
Thanks for your time
MODS: I apologize if this is the incorrect sub-forum for this.
Try CM 10.1.
tilal6991 said:
Try CM 10.1.
Click to expand...
Click to collapse
It worked! It's beyond me what the differences are to have made this function correctly now.
I hadn't previously done this as I read up that 4.2 changes the partition layout? I had assumed that after that it wouldn't have been possible to downgrade to 4.1 without the need of flashtool.
After installing Gapps for CM10.1 via goo.im they FC right after boot. Would this be caused by the latest CM10.1 nightly?
Edit: That being said, I acknowledge that the nightly builds aren't meant to be stable, but you would have thought that the gapps suite works!
I upgraded my p1000 from cm10.2 to cm11 few weeks ago but the latest cm11 seems to be a bit laggish on my device and I'd like to go back to cm10.2, first of all... is it possible? If so, which is the proper way to do it?
mrfree2ita said:
I upgraded my p1000 from cm10.2 to cm11 few weeks ago but the latest cm11 seems to be a bit laggish on my device and I'd like to go back to cm10.2, first of all... is it possible? If so, which is the proper way to do it?
Click to expand...
Click to collapse
I'd recommend you try OmniROM Its what I'm using on my "P1" and although it has its share of problems. Wired Headsets don't seem to be working. Its no more worse then CM10 was, and on that note why CM10.2 which like CM10.1 was broken beyond use? The only decent CM10 was CM10 from 2013 - 02 - 03. Which AFAIK was the last fully working CM10 Mod for the P1000. As the 10.1 and .2 had the Camera Bugs.
In any case Omni is pretty well supported with near nightly, or at the lest every other night updates. As long as you don't get crazy with it with Live Wallpapers, like my Old man was trying to run on it. (He too has a P1000), its pretty damned responsive. But. Again you ONLY have 512MB of RAM on the P1000. In some rear cases even less then this!
In my Fathers case the same sh-- that was causing his CM11 to lag like heck, was the same crap that was making the fresh install of his CM10 (version as dated above!), lag just as bad. So you might want to first clean up such resource hungry Apps as you have first.
But, on the Latest OmniROM for the P1 (Int't GSM version), as of 06.08.14 (Which is still the the most current at the time I wrote this), just running the Google Now Launcher, and a few widgets. The Tablet doesn't feel any considerably slower then it did back in CM10, and the Google Now Launcher is a KEEPER! I can't imagine wanting to roll back to CM10.
P.s. Did you remember to reset your Firmware + wiping the Cache Partition, and Dalvik Cache? This could also partially explain your problems. If you, had not done this.
P.p.s. Download your ROM, and appropriate GAPPs Package, then reboot your P1000 by pressing both the Volume Up, and Power Button till you see the Galaxy Tab / Samsung Bootloader Screen. Then release the Power Button, while continuint to hold the Volume Up till you fully enter the Recovery Mode.
Once in the Recovery Mode do the following Factory Reset, then Wipe Cache Partition and the Dalvik Cache (Advanced Settings). Then install your CM10.x ROM from where you stored it i.e. the /Download Folder? And when thats though. Your GAPPs Package as well. After which you then boot into your new ROM. Which might take a few moments longer, on the first boot as the Database(s)? have to built from scratch again.
Mmmhh I think I'll follow your suggestion and I'll try OmniROM. Have you used the CWM recovery or the TWRP suggested on their official wiki to flash the omnirom?
mrfree2ita said:
Mmmhh I think I'll follow your suggestion and I'll try OmniROM. Have you used the CWM recovery or the TWRP suggested on their official wiki to flash the omnirom?
Click to expand...
Click to collapse
The way I described it before was for CWM. OmniROM uses TWRP. The ideas the same, in fact its a bit simpler on TWRP, in as far as it simplifies the wipe progress. Just One TIP download and install SuperSU, and run it. Once your rooted, go into your System Settings and click on the SuperSu Setting, (near the bottom), and it should ask you if you want to use a backup script, to keep root! You should run this if you want to... Need to keep Root for say AdAway. As OmniRom does NOT ship out with Root... WHY?! I can't say.
Other then that the only other annoying things I dislike about this ROM is that I have to keep uninstalling the Apollo Player. as well as reinstalling the Xposed Installer reset the "ro.config.low_ram" from true, to false, to re-enable transparencies, as well as other Lock Screen Widgets. After each update. Which again averages about every other day. I use something called ROM Toolbox Lite to do this, as trying to do this manually I always seem to gimp my install to a point of bootlooping.
But, other then these little niggles I actually like this ROM! for the most part.
And we should discourage question thread in development forum.
Sent from my GT-N7100 using XDA Free mobile app
Hello .... I'm finding whatever OS I'm trying becoming unstable to use . So, I'm asking if there is any OS that is actually stable enough to use . I don't care whether it's an old version or what . I'm not using the tablet for games, just something I can browser the internet with . TIA
The one that has given me the fewest issues is https://forum.xda-developers.com/showthread.php?t=2712680 [ROM] [4.4.4] [CyanogenMod 11 by Jcsullins] [DM] [06/12/15]
everything works extremely well except the DSP manager when adjusting audio settings for the built in speakers where changes beyond the defaults do not have any effect on the audio.
Sadly many of the links are dead for things like gapps.
The ROM I use is cm-11-20151116-SNAPSHOT-jcsullins-tenderloin.zip
The gapps I use is: gapps-444-base-20160802-1-signed.zip
If needed, I can upload the gapps that I use though I am unsure if the forum has any rules surrounding it if I were to upload them to something like dropbox.
I try the others from time to time (easier for me since I really only use BSplayer and chrome in order to watch videos in a hover window while surfing the web (occasionally using my Bluetooth speakers or headphones).
Anyway, the main reason why I keep coming back to it, is the memory management. For many newer ROMs, you have issues such as the google calendar widget not working,or chrome not working properly, or when it is working, frequeny memory issues, especially if you want to upload an image to a site where it switches to the gallery app. by the time you select an image, it would fail to attach it because it will complain that the previous action could not be completed due to low memory.
With android 4.4, I do not have that issue. I don't know why it keeps happening for me since there are times when there will be over 100MB of free RAM, and chrome will still fail to do things with that error message.
Beyond that, the home screen under android 7.1.1 does not hold as many icons or widgets, even if you set the screen size to small, or adjust the dpi to 120. the home screen holds fewer icons and fewer widgets.
Overall, while it si great that newer versions of android are being supported, I feel that from a hardware standpoint then tablet has reached its limit with android 4.4
While there is also an evervolve version of android 4.4, for some reason it does not perform as well, even with more kernel features such as being able to overclock past 1.78GHz. it takes longer to boot, and some widgets do not work, along with issues with chrome.
https://forum.xda-developers.com/showpost.php?p=71176374&postcount=937
Check out the Nougat Evervolv thread. I've been using it, and it's fantastic.
Thanks for your input Razor512 .... And crazyates : Has this been updated since its first release, because when I gave it a go it was very unstable
Dude905 said:
Thanks for your input Razor512 .... And crazyates : Has this been updated since its first release, because when I gave it a go it was very unstable
Click to expand...
Click to collapse
Yes it has, but you need to download the nightly from their website. The XDA thread has an older version.
http://evervolv.com/devices/tenderloin
Ok, great news there crazyates. I installed evervolv from the YouTube guide, Do you know whether it still will work with those methods in the guide just as long I replace it with
ev_tenderloin-7.1.1-nightly-2017.03.03.zip and I believe you are using gapps-511-base-20161007-1-signed.zip , yes ? Thanks
YouTube >>> https://www.youtube.com/watch?v=ISWZ0c48gNA
Dude905 said:
Ok, great news there crazyates. I installed evervolv from the YouTube guide, Do you know whether it still will work with those methods in the guide just as long I replace it with
ev_tenderloin-7.1.1-nightly-2017.03.03.zip and I believe you are using gapps-511-base-20161007-1-signed.zip , yes ? Thanks
YouTube >>> https://www.youtube.com/watch?v=ISWZ0c48gNA
Click to expand...
Click to collapse
I'm not sure about the Youtube instructions, and I followed the written instructions on the forums.
Also, IIRC, if you're using a 7.1.1 ROM, you can't use a 5.1.1 Gapps. I would recommend downloading the newest 7.1.1 Gapps.
Here are the instructions I followed:
AlwaysLucky said:
If you end up having to start from scratch in TP Toolbox v0.42, follow these steps:
- Download a TP Toolbox Compatible ROM
- Download a TP Toolbox Compatible GApps
- Download a TP Toolbox Compatible TWRP
1. In the TP Toolbox v0.42 main menu, do a 'Complete Data Reset' to start from scratch
2. Select the 'Install Android' option from the main menu
3. Copy the 3 above files to the install folder after the TP is mounted
4. When given the option to adjust partition sizes, increase the System partition to at least 1312mb
5. Finish install, and reboot to TWRP
6. While in TWRP, flash the 9/6/16 TWRP 3.0.2.0 or the smaller 9/11/16 TWRP 3.0.2.0
7. Reboot into the new TWRP that you just flashed
8. In TWRP advanced wipe menu, wipe the System partition
9. While still in TWRP, flash the ROM from the OP along with some OpenGapps
10. Worship @jcsullins and @flintman, as they are your gods.
Click to expand...
Click to collapse
Here are the changes/differences I made/noticed:
crazyates said:
Step 3: While you're copying the older ROM/Gapps/TWRP into the "ttinstall" folder, I also copied everything you need for the new install into an "evervolv" folder. This way you can copy everything at once, and formatting a volume in TWRP doesn't destroy your install files.
Step 4: I have a 32GB TP, and don't use hardly any of it, so I increased the System to ~2GB, and the Cache to ~1GB. I figured going on the big side couldn't hurt.
Step 6: There's a newer version of Flintmans TWRP, 3.0.3.0(12/22/16).
Step 8: After you wipe the System, reformat the Data and Cache volumes as F2FS. Because your install files are on the External_SD instead of the Data, you can do this without recopying your install zips back again. I installed the system twice, once with Ext4 and once with F2FS. It feels snappier, and runs a lot better with F2FS.
Step 9: I used the Nightly build for the ROM, which is working great. Then the newest Gapps. Then I also flashed the SKZ overclock kernel at the same time.
Few other notes: Changing the Governor to LionHeart and Scheduler to Tripndroid made a noticeable difference for me. Also, because this doesn't have a lot of RAM, I gotta be careful with what I install, and how much I try to use it. Do NOT install Chrome from the app store. It will eat every bit of RAM available, and slow the whole thing down. I also use Greenify (with root permissions) to hibernate any app I can so it saves a lot of RAM that was as well. I'm using ~329MB (40%) for the system, with ~500MB (60%) available for apps.
Click to expand...
Click to collapse
@crazyates Did you try Evervolv 7.1 nightlies? I'm curious to read your experience feedback because I'm on it and getting tired of always having a non-responsive tablet. I might go back to 4.4 as I'll go mad otherwise.
bobcote said:
@crazyates Did you try Evervolv 7.1 nightlies? I'm curious to read your experience feedback because I'm on it and getting tired of always having a non-responsive tablet. I might go back to 4.4 as I'll go mad otherwise.
Click to expand...
Click to collapse
I am running the 7.1.1 nightlies. I haven't had any problems, and it's running very smooth. I'll randomly update it to the newest nightly, and haven't noticed any issues.
I do remember the time I first installed Evervolv 6.0 nightly last year. I installed it, and the touchscreen didn't work. At all. Looked into it, and it was a problem with that specific nightly build, so I went and reflashed everything with the one from the day before, and it worked great.
Anyways, all that to say it's working great, but it's still a nightly, so sometimes things go wonky.
I am still running a really old ICS build, and I noticed i can't update all my apps no more... what is the best Android version to run on the TP. Bluetooth is a must, but Camera isn't. Heard good things about 4.4.4 and 7.1.1, which one would you guys say runns smoother?
wprpalmeida said:
I am still running a really old ICS build, and I noticed i can't update all my apps no more... what is the best Android version to run on the TP. Bluetooth is a must, but Camera isn't. Heard good things about 4.4.4 and 7.1.1, which one would you guys say runns smoother?
Click to expand...
Click to collapse
Can't say much for 4.4.4, but I'm using 7.1.1 and it's great!
The only argument I could see making for 4.4.4 is if it runs a bit lighter than 7.1.1. These only have 1GB of RAM, so if 4.4.4 is capable of using less RAM for the android system, that means more RAM for apps. On the flip side, 7.1.1 uses such things as zRAM and KSM for better memory management, so it may be a wash.
crazyates said:
Can't say much for 4.4.4, but I'm using 7.1.1 and it's great!
The only argument I could see making for 4.4.4 is if it runs a bit lighter than 7.1.1. These only have 1GB of RAM, so if 4.4.4 is capable of using less RAM for the android system, that means more RAM for apps. On the flip side, 7.1.1 uses such things as zRAM and KSM for better memory management, so it may be a wash.
Click to expand...
Click to collapse
yeah, this is what I want to figure out. The developments in the Android codebase were quite extensive between these two releases, and the huge influx of budget phones in some markets (like mine for example) lead me to believe memory management would have been a key point in developing versions after 4.4.4. I'll give 7.1.1 a whirl and see how it goes.
Here are the instructions I followed:
...
Here are the changes/differences I made/noticed:
Click to expand...
Click to collapse
I tried to follow your instructions, but I get error messages like:
Error: unrecognized/unsopported zip 'FLINTMAN-TWRP-touch-data_media-SELINUX-f2fs-3.0.3.0-1-23-17.zip'
Error: Incompatible GAPPS/ROM versions None/7.0
I used the latest nightly (ev_tenderloin-7.1.1-nightly-2017.03.08.zip) and tried both open_gapps-arm-7.1-pico-20170312.zip and open_gapps-arm-7.1-pico-20170312, also I tried some of the TWRP-Versions you linked. I'm using TPToolbox v42 2015-01-08). So I wonder how you can figure out which versions fit together, I can remember this nagged me last time until I found a combination that worked...
AlwaysLucky said:
If you end up having to start from scratch in TP Toolbox v0.42, follow these steps:
- Download a TP Toolbox Compatible ROM
- Download a TP Toolbox Compatible GApps
- Download a TP Toolbox Compatible TWRP
1. In the TP Toolbox v0.42 main menu, do a 'Complete Data Reset' to start from scratch
2. Select the 'Install Android' option from the main menu
3. Copy the 3 above files to the install folder after the TP is mounted
Click to expand...
Click to collapse
Flexmaen said:
I tried to follow your instructions, but I get error messages like:
Error: unrecognized/unsopported zip 'FLINTMAN-TWRP-touch-data_media-SELINUX-f2fs-3.0.3.0-1-23-17.zip'
Error: Incompatible GAPPS/ROM versions None/7.0
Click to expand...
Click to collapse
Was that error message from TP Toolbox, or from TWRP? TP Toolbox won't recognize the newer TWRP images, nor will it recognize any 7.1 ROM/Gapps, so you need to use an older version to get things started. Once the older TWRP is installed, then you can use it to update to a newer version.
All in all, I had 8 ZIP files on my HP Touchpad to get a complete 7.1.1 install, but you can do it with as few as 6:
OLD ROM: CM 12.1
OLD Gapps: 5.1
OLD TWRP: 2.8.3.0
NEW ROM: Evervolv Nightly
NEW Gapps: 7.1
NEW TWRP: 3.0.3.0 F2FS
SKZ Kernel (Optional)
SuperSU (Optional)
Thank you! I installed the latest nightly, and it works fine so far.
The only thing I noticed that some apps now are blocking the device. This was also the case with the Android 4.4 Pac-Rom I used before. So it seems that some apps are using recources that aren't working well on the Touchpad at all, or that there is a general problem in several CM-versions.
For example the current version of Google Maps is so slow, you won't use it. I installend an older version (7.7.0), and this one works very fine. Also the new version of Maps lost the WiFi connection, which didn't cause any problem with the older version. So I wonder if there is some kind of incompatibility.
Another example: Fake GPS Location is much quicker than GPS-Emulator which also got stuck from time to time. Also the current Amazon App store was slooow.
Summary: Android 7.x runs fine so far, but you have to make sure that you get rid of the apps which block the device for some reason.
7.x is very slow some times.
Flexmaen said:
Thank you! I installed the latest nightly, and it works fine so far.
The only thing I noticed that some apps now are blocking the device. This was also the case with the Android 4.4 Pac-Rom I used before. So it seems that some apps are using recources that aren't working well on the Touchpad at all, or that there is a general problem in several CM-versions.
For example the current version of Google Maps is so slow, you won't use it. I installend an older version (7.7.0), and this one works very fine. Also the new version of Maps lost the WiFi connection, which didn't cause any problem with the older version. So I wonder if there is some kind of incompatibility.
Another example: Fake GPS Location is much quicker than GPS-Emulator which also got stuck from time to time. Also the current Amazon App store was slooow.
Summary: Android 7.x runs fine so far, but you have to make sure that you get rid of the apps which block the device for some reason.
Click to expand...
Click to collapse
When you say "blocking" you mean very slow? Since I uptaded from 4.4 to 7.x I've noticed that lots of apps are very slow. Some freezes for seconds and returns only when I block the device and turn on again. I dont know if its only on mine or its normal because of the old hardware. Is there any version that run real smooth? Or other system?
giolc90 said:
When you say "blocking" you mean very slow? Since I uptaded from 4.4 to 7.x I've noticed that lots of apps are very slow. Some freezes for seconds and returns only when I block the device and turn on again. I dont know if its only on mine or its normal because of the old hardware. Is there any version that run real smooth? Or other system?
Click to expand...
Click to collapse
Yes I mean very slow. Often so slow that it takes a minute until you can change to another app.
The Problem also existed on my 4.4 Pac Rom, so I guess it's rather caused by new apps who might expect some feature, like multicore, etc. Or it is some fault, that already existed in older custom roms. Not sure. However, I can recommend downgrading apps in this case, older versions often work like normal.
Flexmaen said:
Yes I mean very slow. Often so slow that it takes a minute until you can change to another app.
The Problem also existed on my 4.4 Pac Rom, so I guess it's rather caused by new apps who might expect some feature, like multicore, etc. Or it is some fault, that already existed in older custom roms. Not sure. However, I can recommend downgrading apps in this case, older versions often work like normal.
Click to expand...
Click to collapse
Perhaps using F2FS could help, if not currently using it?
crazyates said:
Was that error message from TP Toolbox, or from TWRP? TP Toolbox won't recognize the newer TWRP images, nor will it recognize any 7.1 ROM/Gapps, so you need to use an older version to get things started. Once the older TWRP is installed, then you can use it to update to a newer version.
All in all, I had 8 ZIP files on my HP Touchpad to get a complete 7.1.1 install, but you can do it with as few as 6:
OLD ROM: CM 12.1
OLD Gapps: 5.1
OLD TWRP: 2.8.3.0
NEW ROM: Evervolv Nightly
NEW Gapps: 7.1
NEW TWRP: 3.0.3.0 F2FS
SKZ Kernel (Optional)
SuperSU (Optional)
Click to expand...
Click to collapse
I guess there is a "new" method out there that can install Nougat 7.1.1 in as little as 3 zip files!!!
check it out, it comes with instructions and a new video...
I can name that tune in 3 zips!!
DoubleStuff said:
I guess there is a "new" method out there that can install Nougat 7.1.1 in as little as 3 zip files!!!
check it out, it comes with instructions and a new video...
I can name that tune in 3 zips!!
Click to expand...
Click to collapse
It doesn't work for me ... I'm having issues . First off I like to ask why he didn't use the latest Rom ? And the part with go to the PC Mounted Touchpad internal drive for the TWRP ? When I open the TWRP folder I don't see twrps file, why not ? There nothing in this folder, its empty . What I done was just placed those zip files in the TWRP folder . Afterwards once I do the final reboot to Evervolv it will just show those Evervolv lights flashing like its trying to load up but it doesn't, it just keeps continuously trying to load but it never does
I successfully rooted my droid (that came with lollipop), using this guide
https://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684
installed twrp backed up the stock OS and installed resurrection remix lollipop rom. I did not install any different modems or radios as I planned to stay on lollipop.
Everything worked great yet after a day or two the display/phone would appear to lock up. I can press power, the display doesn't come on and when (usually) moving the the volume up/down I do hear sounds. Sometimes at this point it will reboot by itself, other times I have to reboot it.
When it comes up it goes through the android is upgrading thing, and sometimes works fine after, sometimes not, regardless eventually this problem repeats.
Thinking it was perhaps RR I tried straight Cyanogenmod, and eventually the rooted stock OS, both have this same problem.
I've tried using it with very minimal installed in the way of apps, same issue.
I've tried saving the log to SD to peer at later, but going through it I don't really see anything obvious to show what the problem is.
I"m wondering if there's a problem with the phone itself (it's a refurb) and am considering unrooting it and returning it.
Anyone seen this or thoughts on what might be the issue?
p.s.
if you happen to have a good link handy to an unrooting guide you might shoot it my way thanks.
thanks in advance!
What versions of the other ROMs did you use? Lollipop also, or Marshmallow? Nougat? For rooted stock ROM did you upgrade to Marshmallow? None of the Lollipop ROMs are supported anymore, so hard to answer for those.
There are ways to grab logs after a reboot, but here's another suggestion...
I use Auto Reboot app (needs root) to schedule a reboot my phone every day while I'm asleep.
This seems to keep the cobwebs cleared out, so the phone runs better. I know you want to find the issue, but maybe it's an accumulation of apps not releasing RAM orb something. This might help prevent that.
thanks for the reply
ChazzMatt said:
What versions of the other ROMs did you use? Lollipop also, or Marshmallow? Nougat? For rooted stock ROM did you upgrade to Marshmallow? None of the Lollipop ROMs are supported anymore, so hard to answer for those.
Click to expand...
Click to collapse
I tried the last released CM lollipop snapshot, as well as the last nightly.
For RR it was last released, "ROM OS Version: 5.1.x Lollipop"
ChazzMatt said:
There are ways to grab logs after a reboot,
Click to expand...
Click to collapse
Yeh I've been saving it to the SD so I can view it after a reboot, I've looked at 4 or 5 of them after the problem occurred and at least to me nothing really stood out
ChazzMatt said:
but here's another suggestion...
I use Auto Reboot app (needs root) to schedule a reboot my phone every day while I'm asleep.
This seems to keep the cobwebs cleared out, so the phone runs better. I know you want to find the issue, but maybe it's an accumulation of apps not releasing RAM orb something. This might help prevent that.
Click to expand...
Click to collapse
Yeh I expect it might periodically need a reboot but if it's just unpredictiably locking up or rebooting on its own it's not very usable.
I think I'm just going to have to try to unroot and return, maybe I'll go with a LG V20 as I don't want to have pay to re-root another one of these and possibly have same issue. Also the whole pay to have some app do something secret to my phone does leave me a bit uneasy.
Kind of a bummer as I'm actually pretty impressed with this device, fast, good battery, takes nice photos, only drawbacks for me are no removable SD and lack of LED notification, but I was willing to live without those given how good everything else was.
thanks
Same here,
I tried with different Roms 7.X, still blocking and display not turning on.
I'd appreciate some help.
Thanks!
Android Version: 7.1.2
Current Rom: AOKP
Kernel: 3.10.107-Stock-bhb27-nougat-kerneL
MrN00b said:
Same here,
I tried with different Roms 7.X, still blocking and display not turning on.
I'd appreciate some help.
Thanks!
Click to expand...
Click to collapse
FWIW and in case it helps you or someone else, I seem to have fixed mine finally, here's what I did.
First I installed latest twrp (mod 4) https://androidfilehost.com/?w=files&flid=39562 (there's a thread on this twrp if you want tor read on it). That in itself didn't fix the issue but did finally let me format and got rid of an 'mkfs.f2fs: invalid option -- r, ERROR=1' type error I used to get.
I installed this stock zip from twrp as described in thread:
https://forum.xda-developers.com/droid-turbo/development/rom-su4tl-49-100-stock-t3390041
It would never actually boot it would shut my phone off not long after showing the boot screen, and I'm not sure if doing that was necessary or not.
Taking some suggestions from here:
https://forum.xda-developers.com/droid-turbo/help/help-request-custom-rom-phone-unlocked-t3767070
I dug up the last official CM 13 snapshot:
https://www.google.com/search?q=cm-13.0-20161221-SNAPSHOT-ZNH5YAO3Y5-quark.zip
sha1: 9a219dd487c27e51b0c5c4922812838f394099c5
Wipe and installed with no gapps and voilà it would boot consistently. Without reinstalling I tried installing pico gapps and it would still boot though it took maybe 15 mins initially.
I want Nougat so I wiped and installed lineage-14.1-20180612-UNOFFICIAL-quark.zip from https://forum.xda-developers.com/moto-maxx/development/rom-t3494646 again no gapps and it also booted fine, whereas previously it would hang on booting. Without reinstalling ROM I tried installing opengapps nano and it would just hang.
I could then no longer get it to boot again, so I reinstalled CM13 no gapps, which booted fine, wipe and install lineage-14.1-20180612-UNOFFICIAL-quark.zip no gapps, and now it boots fine though currently it's taking a while.
I should perhaps note I took twrp backups inbetween steps whenever I had a working boot, (ex before installing gapps), but once the phone went back to hanging on boot, those restores didn't help. Only reflashing CM13 seemed to clear things up.
My ultimate goal is a LOS ish Nougat/Oreo ROM with no gapps using microg, and running tmobile, I'll see what I end up with.
Hello everyone. I am opening this thread for the sake of convenience of us users of this ROM so that we stop hijacking the Oreo version thread and have a "clean" place where we can discuss about our experience with this great ROM. So I suggest anything regarding this ROM to be posted here!
You can find the official builds here: https://get.resurrectionremix.com/?dir=hammerhead
DISCLAIMER: I am by no means a developer or maintainer of this ROM, so this cannot be considered an official support thread, just conversation, plain and simple! Moderators can close this thread as soon as an official support thread opens.
Cheers!
I just installed the rom,came from stock. My first impressions are:
-It took 2 reboots to get the camera working. Installed google camera app since the integrated one doesnt show up on app drawer(you can access it from lockscreen though) and it seems to work kinda bad(picture goes black on it sometimes).
-It runs a bit hotter than stock rom. It might be just me though,I have opened the phone a few times to fix the power button which seems to get stuck for me once in a while.
-The default DPI doesn't seem right,everything looks a little bit smaller than it does on stock rom. There is an option to change it though, I set mine to 380 and it looks about right.
I haven't found any other issues yet.
Another note,I think the rom fixed my notification led lol. It didn't work for me on stock rom for some reason.
Pretty good rom overall,I haven't faced any stability issues yet.
edit: Is there any way to lower the resolution?
I upgraded from RR's Oreo build. Before flashing I repartitioned the phone using the method described here and the even more detailed instructions posted by douguluskaien on page 12 of that thread. The flash went very smoothly and although the phone initially ran hot it cooled back to normal after a few hours of what was probably background processing. With the 1.5G system partition I was able to install the micro version of GAPPS. I've had that experience after flashing new ROMs on other phones as well. I also discovered the bundled camera doesn't work and installed Google Camera. After starting up Google Camera, the original camera worked also. I tried connecting bluetooth headphones, and even though I could pair the headset I couldn't get the phone to send audio - it just kept playing through the phone speaker. I also found the default font size a little small, but changing it to Large in the Font Size menu got it back to what seems like normal.
I have one major issue which I realize is not directly related to the ROM. A custom version of TWRP is required to support the non-standard partitions, and that version is based on TWRP 3.2.3 and doesn't support device encryption. Does anyone know if an updated TWRP will be available that will allow me to encrypt the phone and still do recovery-related stuff?
In summary, this is impressively well along for a build that's only been live for a couple of weeks. This isn't my daily driver so I don't need absolute stability, so this is plenty for me for now. I just won't leave the house with it until I can encrypt.
I've been using this ROM for about a month now as a daily driver, so here's my feedback:
ROM is very nice and smooth and feature rich (as expected for RR). I installed it with Opengapps nano, rooted with Magisk. It works very well with the Pixel launcher I grabbed from here.
Some drawbacks I noticed:
Battery life is rather bad. I get 1h30m SOT at best with very mild usage (mostly site browsing and a little bit of social apps and YT video watching) . Then again I am still using the 5yr old battery that came with the phone...
The phone runs very hot (too hot to hold!) after using it for some time. It cools down rather fast if you let it be for a while, though.
Sometimes the camera is crashing (the notorious "can't connect to camera" error). usually a reboot fixes this.
Sometimes it takes a while for the device to wake up after pressing the power button.
I got some soft reboots under device heavy load. Mostly I get them when using the Rocket player music app, and it tries to load a large music folder. Phone freezes, then soft reboots.
SElinux is set to permissive and the build is signed with test keys. Maybe the first thing is caused by the latter, I don't know really....
Overall, it is a good ROM with room for improvement. However, I am concerned about its maintenance status. No update since May 14, so I keep my fingers crossed.
New build (28/07) uploaded!
hammerheadache said:
New build (28/07) uploaded!
Click to expand...
Click to collapse
I am not able to install it giving me ERROR 7
hammerheadache said:
New build (28/07) uploaded!
Click to expand...
Click to collapse
Do you know about change log??
What features added?
I want to update it tonight
As I state at the first post, I am not a developer, neither I have any involvement in this project and the people behind it. So I can't provide any support apart from my experience as a user.
sacmat said:
I am not able to install it giving me ERROR 7
Click to expand...
Click to collapse
I didn't flash this build so I don't know if it works or not. I have switched to a different ROM. However, could you elaborate? Do you come from another ROM? Did you dirty flash? Is your device repartitioned? Usually error 7 in TWRP means there's not enough system space...
m.morcielago said:
Do you know about change log??
What features added?
I want to update it tonight
Click to expand...
Click to collapse
I do not see any changelog file on the download page. Unfortunately with no official support thread, there are no official answers as well...
I flashed this build this morning by dirty way
Unfortunately Bluetooth is not working
It can find the other devices but can not connect to them
1- How can I fix it?
2-How can I downgrade to previous build?
hammerheadache said:
As I state at the first post, I am not a developer, neither I have any involvement in this project and the people behind it. So I can't provide any support apart from my experience as a user.
I didn't flash this build so I don't know if it works or not. I have switched to a different ROM. However, could you elaborate? Do you come from another ROM? Did you dirty flash? Is your device repartitioned? Usually error 7 in TWRP means there's not enough system space...
I do not see any changelog file on the download page. Unfortunately with no official support thread, there are no official answers as well...
Click to expand...
Click to collapse
Thanks for the idea, I had just repartitioned, so I had format my entire phone, (before that i had taken the backup ), and I had successfully installed the rom, I got an strange issue of WIFI connectivity, as I am not able to connect to my wifi which is having Hidden SSID, but i am successfully connected with the hotspot from my another primary phone. i haven't tested the bluetooth yet.
I dirty flashed the new build this morning. Haven't tried bluetooth or camera yet, but Wifi is working fine. As usual, the phone heated up for about a half hour after the flash and then the temp dropped and stabilized. Battery life is not great, like the May build, and there is often a long delay responding to the power button, especially shortly after power-up, but the build seems pretty solid.
Casting isn't finding anything to cast to in the most recent build. Camera worked fine.
New build available (Aug 4) as seen at ROM's dl page.
Bluetooth pairing now working for me on last release
Hi installed this ROM in clean maner but i got intermitent issue with sim card. Not sure if it is only sim issue or reboot but phone ask my pin code.
Looks like @voidz777 is the maintainer for RR Pie as well:
https://github.com/ResurrectionRemix-Devices/api/commit/8388c5df5069cf04df04facbdc22a2bfd8890185
New build (09/08) in case someone missed it... Link in OP
sacmat said:
I am not able to install it giving me ERROR 7
Click to expand...
Click to collapse
okay so to fix this you will have to repartition your system.
This thread will help you. https://forum.xda-developers.com/go...ment/repartition-nexus-5-repartition-t3844395
Repartitioning is the fix to error 70 while flashing gapps as well as error 7.
New build (Sep 16) available! Link in OP.
princeknockouts said:
okay so to fix this you will have to repartition your system.
This thread will help you. https://forum.xda-developers.com/go...ment/repartition-nexus-5-repartition-t3844395
Repartitioning is the fix to error 70 while flashing gapps as well as error 7.
Click to expand...
Click to collapse
Thank you for the tip, I followed the thread and was able to install RR 7 without any trouble. This might not be the right place to ask, but would you have any info on how to install SuperSU on RR 7, or is there perhaps another root method that we must use? Thanks in advance, I can't seem to find information on it anywhere and rather than continuing to bang my head against the wall I thought I'd ask.