Hi,
I can't connect to any WIFI networks with my SAMSUNG Galaxy Mini II (GT-S6500T). Now I tried for the first time a custom ROM (CM 10.1 Improved 07/07 build) but it doesn't work neither. I can see the networks and the phone is trying to connect but something goes wrong... (Password is correct. I tried many networks.)
Maybe somebody have got an advice for me?
I will attach a log file.
Baseband version: S6500TDULE1
Paraguay said:
Hi,
I can't connect to any WIFI networks with my SAMSUNG Galaxy Mini II (GT-S6500T). Now I tried for the first time a custom ROM (CM 10.1 Improved 07/07 build) but it doesn't work neither. I can see the networks and the phone is trying to connect but something goes wrong... (Password is correct. I tried many networks.)
Maybe somebody have got an advice for me?
I will attach a log file.
Baseband version: S6500TDULE1
Click to expand...
Click to collapse
First try to remove your networks from phone, turn off wifi , turn on and try to connect; it happens some times , reset/restart your router, and remove your wpa/wpa2 security to see if it connect!
Related
[Q] Could you have wpa_supplicant that fix ad-hoc on 2.3.6, please?
I use [ROM] MitRa Rom V5.2 [JW1][2.3.6]|- Graphical-Stable-Fast (Persian Support)04Jan] on my Galaxy S (I9000) but I cannot connect with ad-hoc
I try some patch in the web it can see ad-hoc but cannot connect
It's still in the Obtaing IP address loop T_T
Please help me
Thanks
Use attached file. After trying connection to adhoc wi-fi.Looks like a nothing happen.Doesnt apear any wi-fi symbol on notification bar but it connected. you can connect to the internet with opera. This file for froyo roms but limited working on gingerbread. Maybe somebody try and modified on it.
Zephyroro said:
[Q] Could you have wpa_supplicant that fix ad-hoc on 2.3.6, please?
I use [ROM] MitRa Rom V5.2 [JW1][2.3.6]|- Graphical-Stable-Fast (Persian Support)04Jan] on my Galaxy S (I9000) but I cannot connect with ad-hoc
I try some patch in the web it can see ad-hoc but cannot connect
It's still in the Obtaing IP address loop T_T
Please help me
Thanks
Click to expand...
Click to collapse
try this version. i use it on 2.3.6 jvz and works fine. the only problem is that it disconnects after first try of getting ip, but after that remains connected permanently.
z3wl said:
try this version. i use it on 2.3.6 jvz and works fine. the only problem is that it disconnects after first try of getting ip, but after that remains connected permanently.
Click to expand...
Click to collapse
Thankyou but it doesn't work T_T
my Galaxy is I9000XXJVT
it see * in front of name of ad-hoc
when I press connect, it shows nothing just show "remember"
Edit-----------------------------------
First, I think it doesn't work , but after I reboot my Galaxy S, it connects already
Thank you very muchhh !!! It WORKS !!!
But when I disconnect, it cannot connect anymore TT
It works , but still have some bugs. Anyway Thanks+++ !
Zephyroro said:
Thankyou but it doesn't work T_T
my Galaxy is I9000XXJVT
it see * in front of name of ad-hoc
when I press connect, it shows nothing just show "remember"
Edit-----------------------------------
First, I think it doesn't work , but after I reboot my Galaxy S, it connects already
Thank you very muchhh !!! It WORKS !!!
But when I disconnect, it cannot connect anymore TT
It works , but still have some bugs. Anyway Thanks+++ !
Click to expand...
Click to collapse
the same happends to my galaxy s. it says remember, the u turn wifi off. then u turn wifi on, and it will get ip, first will fail, and the will get it corectly. and it will remain permanently connected. the (*) means that the connection is AD-HOC. i know its kinda buggy but its the best option we have now. i've searched the whole google and i couldn't find a better version. enjoy.
yes, me too T_T : difficultly connect
So, now i will use it til the new one comes
i just flashed the latest official rom 2.3.6 jvu. and now the wpa_supplicant doesn't work anymore. i rolled back to jvz (ad-hoc worked there with this modified wpa_supplicant), and now it doesn't work at all. i turn on wifi (it turns on really slow), and it doesn't see any wifi connection. any solutions guys? please
ad-hoc for CM9
Can anyone build wpa_supplicant supporting ad-hoc wifi for 4.0.3 or CM9.
The files are not working on gingerbread 2.3.6, kernel xxjw4, SE INFRA. Could someone please make it work? thanks
Three days ago, I have upgraded my N7000 with the CM9 nightly posted on 2012 07 01 and since i don't have any network signal on my phone.
I can manually scan network but on selecting any of the networks available, it shows the message: "unable to connect to this network at this time. Please try again later."
My SIM card works on a friend phone and his SIM card doesn't work on mine.
The IMEI number shows up correctly and the Efs folder isn't empty. I am on the Orange network.
According to the similar posts on xda, I tried :
A full flash with the latest version of CM9 (2012 07 05) (Wipe data+cache)
to restaure the file "apns-conf.xml"
to remove SIM pin
My phone still find available networks but is unable to connect ...
Thanks for your help.
I think this wifi problem common in CM9. I was browsing CM9 in development section of this forum, there are few posts on this isssue, you may find your answer there.( I am little bit nerveous with cm9 based roms, so I have not flashed any of them yet)
Thank you Dsmas,
(Just a point it's not a wifi problem, wifi works, it's about the network signal)
I tried to flash with the RC1 of CM9, but there is still the same connection problem : "unable to connect to this network at this time. Please try again later".
It seems that the problem is not related to the rom cyanogen... Any idea?
It's ok, but i don't understand why...
After multiple reboot it's working now! Perhaps one night switched off....
Sorry for my bad English. I have a problem. At present the Samsung Galaxy S XXJVU I installed the settings from Orange Romanaia internet. Settings often do not remain constant. At APN automatically put a negative sign. Example: APN = internet and I see APN =-net. Can someone help me?
APN getting disconnected
Hi
I am using Remics-JB v2.0 Rev1 with Semaphore 2.0.6, Have a strange problem with APN, it gets disconnected automatically and doesnt gets connected. Inorder to connect, need to reboot the phone.
Is this problem with kernal of OS? Earlier when I was in GB, it was working fine.
Thanks
Hello. When I turn internet connection via mobile network nothing happen. There is no icon letter icon next to my signal strength. Restar phone doesnt help. Any ideas?
mateusz3112 said:
Hello. When I turn internet connection via mobile network nothing happen. There is no icon letter icon next to my signal strength. Restar phone doesnt help. Any ideas?
Click to expand...
Click to collapse
I have a similar issue.. but only when I use a Stock Rom..
When I use a CyanogenMod based rom I connect normally.
Any suggestion if there's an option, in build.prop maybe, so I can fix this in a stock rom?
hi, you use a rom from XDA? is it happen after flashing a new rom, first boot, no mobile internet? -> how about some informations about runnign system etc. pp. was it working before with same rom? and so on....
if no internet after first boot: turn on wifi, go Settings/Xperia/Internet Settings , and try download the settings with wifi. how that?
second thought: your provider's fault?
Xperia V is not officially supported by my carrier, but I can use mobile data on cyanogenmod.
I tried to add APN for my carrier, but they don't appear, using APN Manager I could see and try to apply them, only to get an error.
I was willing to go back to stock rom 'cause I wanted to use sony's camera.. but mobile data is essential.. guess I'll to stick with cyanogenmod..
i have added my provider (three uk) network apn manually and it worked.. yesterday.. Now still I cant connect. No reaction at all. I've downloaded settings via wifi and didnt help. Im running official rom 9.1.A.1.141. It is not a provider fault - I used o2 before and it was the same problem. Sometimes restart helps. but not now,
edit. now restart helped.. i dont get it.. This is very enoying
Anyone have any ideia how to fix this issue?
In CM all APN are shown correctly, in any stock based rom I can't add any entries, or it's not shown.
Hi. So, I just got a Samsung S3 GT-I9305 from Vodacom. Got it from eBay. But, I'm having trouble connecting to the wifi. Whenever I connect to the wifi it always says "Authentication error occurred". I turned off the wifi thingy using *#0011# and wiped the cache, I even reset the phone to its factory settings. I sometimes connect to a wifi, but it takes 1 hour or so before being connected. And I have trouble downloading from the playstore. Did everything I could find from the web. No luck.
So, I was thinking, If I would flash a custom rom to my device, will it fix the wifi issue? And would any stock firmware of the I9305 device work?
Thanks! Sorry for being noob.
Denzel07 said:
Hi. So, I just got a Samsung S3 GT-I9305 from Vodacom. Got it from eBay. But, I'm having trouble connecting to the wifi. Whenever I connect to the wifi it always says "Authentication error occurred". I turned off the wifi thingy using *#0011# and wiped the cache, I even reset the phone to its factory settings. I sometimes connect to a wifi, but it takes 1 hour or so before being connected. And I have trouble downloading from the playstore. Did everything I could find from the web. No luck.
So, I was thinking, If I would flash a custom rom to my device, will it fix the wifi issue? And would any stock firmware of the I9305 device work?
Thanks! Sorry for being noob.
Click to expand...
Click to collapse
Hi,
I think it could be a router issue. You should :
- reset your router and retry to connect with your i9305,
- play with WIFI network settings in router. Maybe something doesn't allow your i9305 connection (network type, firewall, etc.). I'm not an expert in router settings, so you could google this to help you.
- try another WIFI network (from a friend, at work, anywhere you can test )
I think that flashing a custom ROM won't change anything. First try to fix your problem with stock firmware.