I swear I looked far and wide but this appears to be different from the usual "bootloop" questions. Apologies if not.
I flashed a bad ROM, and the device won't boot all the way into the OS. Just sits at the ROM logo for hours.
I previously installed FFF 1.4, so I do get the blue KindleFire logo momentarily, but any fastboot commands I try to send to it just come back with "waiting for device" and then "ERROR: Unable to create a plug-in (e00002be)". I've got TWRP installed and backups galore but I cant figure out how to get to it. I do have a fastboot cable.
Totally at a loss as to what to do. I feel like there's a really simple fix I'm missing, but I've poured through pages of Kindle Fire posts and everyone seems to be having a problem with the KindleFire logo screen and pre-getting all the way to recovery and ROMS installed.
Any help would be much appreciated dudes, you guys always get me sorted out. Thanks!
It sounds like you need the fastboot drivers loaded. Does it appear in device manager when it is plugged in and in fastboot mode?
It comes up under Other Devices: Kindle
Well, now I've got it coming up under Kindle Fire: Android ADB Composite Device. But at no point, apparently does it enter fastboot mode and I can't get any commands to work. Just scoots right through both KindleFire logos and then on to the ROM logo ad infinitum.
Related
Hello, I am looking for some assistance, Tried to install a new rom by first rooting and then trying to install TWRP, after that the unit boots up with the Kindle logo, goes into fastboot mode for 2 seconds and then screen goes dark, I could hear the sound Windows 7 attempting to install the drivers, device manager shows OMAP4440 for a second and then goes away for second and then back to showing the OMAP4440 and stays on that loop forever, I am unable to break the loop cycle, driver install stay on view for only a second, so there is no time to provide or suggest drivers. all this time the kindle remains unaccessible because of the drivers. I also have a fastboot cable and tried with that and same results, please advise.
Thank you
Okay so hey guys, so first off I've searched all over the forums for a potential fix with no such luck so i'm finally making a post seeing if anyone has a fix.
So the issue, my Kindle Fire HD 7"(2012 version) is rooted, TWRP is installed, and i tried flashing Cyanogen mod 12.1(clean flash, not a dirty flash), everything went fine until CM 12.1 started booting up. At this point the little blue android head loading comes up before the screen transitions to a "optimizing apps 1 of 95" window, when that gets done it goes back to the blue android head before transitioning to another "optimizing apps 1 of 16" window, once that completes it just alternates between the CM blue android logo and another "optimizing apps 1 of 16".
I have tried turning off and booting in TWRP recovery mode by holding the up volume button until the blue fire logo displays and then letting go(even tried holding it and not letting go) but it just waits 15-20 seconds on the blue fire logo before transitioning again to the CM blue android boot up logo and beginning a boot loop again.
I also have tried ADB to get into recovery mode but my kindle is unauthorized, it's recognized when i type in the command "adb devices" it's just not authorized. Apparently to authorize it, when you try to get adb to recognize it and it says it isn't authorized, a prompt on whatever device you are using comes up once you unlock the screen asking whether or not you want to authorize said device with said computer. I know this because that's what came up on my phone when i tried to get adb to recognize it, once i accepted it it became authorized and i could use commands with it such as simply rebooting it. I have yet to find a way to authorize my kindle through the terminal rather than through the device itself.
I have not tried the kindle fire first aide as the link for that .zip file on this site takes me to a file storage website that says the shared file or folder link has been removed, so if anyone knows where that .zip file is and thinks it will solve me issue, link me to it please.
I also have not tried Kindle Fire Utility as to my knowledge that tool is for original Kindle Fires only, if that is wrong and it will work just as well for Kindle Fire HD 7"(2012 version) then sorry for my noobness in that aspect.
If no one knows of or has a potential fix i can still buy a fastboot cable and figure out how to fix it through there, i was just wondering if there was any alternative method before i bought one.
Thanks to all who will contribute to me fixing this problem! -Mayhem
EDIT-Solved, not entirely sure how but managed to finally get into TWRP and re-flash everything
This might help you out http://forum.xda-developers.com/kin...ix-fastboot-mode-using-factory-cable-t3168767
didn't work for me
xlr8edmayhem said:
Okay so hey guys, so first off I've searched all over the forums for a potential fix with no such luck so i'm finally making a post seeing if anyone has a fix.
So the issue, my Kindle Fire HD 7"(2012 version) is rooted, TWRP is installed, and i tried flashing Cyanogen mod 12.1(clean flash, not a dirty flash), everything went fine until CM 12.1 started booting up. At this point the little blue android head loading comes up before the screen transitions to a "optimizing apps 1 of 95" window, when that gets done it goes back to the blue android head before transitioning to another "optimizing apps 1 of 16" window, once that completes it just alternates between the CM blue android logo and another "optimizing apps 1 of 16".
I have tried turning off and booting in TWRP recovery mode by holding the up volume button until the blue fire logo displays and then letting go(even tried holding it and not letting go) but it just waits 15-20 seconds on the blue fire logo before transitioning again to the CM blue android boot up logo and beginning a boot loop again.
I also have tried ADB to get into recovery mode but my kindle is unauthorized, it's recognized when i type in the command "adb devices" it's just not authorized. Apparently to authorize it, when you try to get adb to recognize it and it says it isn't authorized, a prompt on whatever device you are using comes up once you unlock the screen asking whether or not you want to authorize said device with said computer. I know this because that's what came up on my phone when i tried to get adb to recognize it, once i accepted it it became authorized and i could use commands with it such as simply rebooting it. I have yet to find a way to authorize my kindle through the terminal rather than through the device itself.
I have not tried the kindle fire first aide as the link for that .zip file on this site takes me to a file storage website that says the shared file or folder link has been removed, so if anyone knows where that .zip file is and thinks it will solve me issue, link me to it please.
I also have not tried Kindle Fire Utility as to my knowledge that tool is for original Kindle Fires only, if that is wrong and it will work just as well for Kindle Fire HD 7"(2012 version) then sorry for my noobness in that aspect.
If no one knows of or has a potential fix i can still buy a fastboot cable and figure out how to fix it through there, i was just wondering if there was any alternative method before i bought one.
Thanks to all who will contribute to me fixing this problem! -Mayhem
EDIT-Solved, not entirely sure how but managed to finally get into TWRP and re-flash everything
Click to expand...
Click to collapse
How did you do it?
Thank you for all the help in advance!
Current state of device:
Fire HD 7" factory cable plugged in stuck on fastboot screen not loop just stuck no access to ADB (device not found[debian gnome])
I was deleting my previous ROM to go back to stock. I wiped my cache, os and everything then went to go and install the stock ROM and my little one managed to power the kindle down. I turned it back on to find kindlefire logo on the screen but it doesn't go past that. I built a factory cable and now it displays the fastboot logo but nothing else, not looping just frozen on the fastboot screen. So the computer [debian gnome] can't find the device when using ADB. (ADB is working with my other devices) I tried to follow a post about using the fastboot cmd to install the system.img, recovery.img and boot.img but did not know exactly what I was doing at that point. Is it done for? or is there hope?
Any help would be greatly appreciated!
There is hope. You could try following the commands in the batch file from this post.
http://forum.xda-developers.com/showthread.php?t=1951254
I've never tried it from Linux but so long as fastboot is working you should be able to flash the 3 images and then wipe data.
Thank you sooo much! this worked like a charm. I downloaded the img files and loaded them to the kindle via fastboot then rebooted and wala back to a fully functioning kindle. Thanks for the link!!!!
Glad to hear it helped you out.
Help me please
I have bricked my device. I can no longer get it past the bootloader Amazon image and can only get it into fastboot. Had root on device and was attempting to flash twrp so that i could install some custom roms. When flashing twrp the device restarted and has been stuck in a silver amazon bootloop. With the help of root junky's supertool i can get into factory recovery. but cannot sidload origional system back. I was gonna go back origional and re root. But can not get it out of bootloop. Tried using the system recovery thread found in second post on this thread and recieved an unsuccessful. Am i done for.... Kindle just stuck on fastboot screen now
Does your device have the front facing camera and the mini hdmi port?
Hi, I have a kindle fire HD 7(Tate) 3rd gen, and I messed it up. I installed twrp somehow, but when I tried to flash something, it said something along the lines of: Error, this package is meant for Tate, this device is Ariel. Now It won't boot(it goes into Amazon's updating(should take 10 mins) screen and stops when the progress bar fills up completely, it doesn't reboot, it just freezes.), when I try to boot it into twrp, it goes as far as the white amazon logo and reboots. I have adb access when it is in the updating screen, luckily. Fastboot mode won't let me flash anything(flashing not allowed for locked hw), and when I type a fastboot command, I can't type in the 0x1949, because it just says waiting for device, but without it, it recognizes it. Any help? Thank you! More info: imgur. com/V6FymMy
SO I foolishly issued the fastboot command via ADB when it was working. I started to issue commands in order to install the 2nd bootloader and recovery. Since that point, the Kindle isn't recognized by Windows 10 Pro anymore and I've tried just about every utility, method and button combination there is.
I read that ADB only needs 4 seconds -/+ to initiate commands once the Kindle powers up. I've tried to issue the ADB to get it to boot back in normal mode and it always sits on <waiting for device>. I attached a screen shot showing what comes up in device manager. I've uninstalled the drivers, reinstalled but to no avail.
At this point, I'm willing to try anything. Stand on my head and shake the Kindle 5 times while rotating it clockwise....anything would help.
*UPDATE* I just more or less wiped my laptop which I have all the ADB drivers on as well as Android Studio. I'm going to run some tests to see if I can get that 4 second gap to initiate an ADB command to get the fastboot to go into normal boot more 4000.
*UPDATE 2* I managed to get generic ADB drivers as well as FASTBOOT drivers installed on my laptop. I can communicate with the Kindle a little. At this point, I've tried to issue ADB commands to restart with bootloader and other commands, but it only reboots back into FASTBOOT. The only thing I've been able to see is with KFFA, I can reboot to normal mode but it just comes back to FASTBOOT. I can also issue the test FASTBOOT and it gives me an ID and recognizes the Kindle. I've tried other options within KFFA but nothing seems to stick. I'm now officially stuck. Any help would be fantastic.
*UPDATE 3*
Thanks to this thread http://forum.xda-developers.com/kin...ment/unlock-kfsowi-bootloader-unlock-t3262770
I was able, or am in the process of loading a 2nd bootloader + TWRP and then on to CM13.
Any ideas?
Windows 10 Pro
Kindle Fire HD
Rooted with Kingroot
No Fastboot cable
Lots of frustration
Eh back to square one. It reverted and there is no TWRP recovery. It's stuck in FASTBOOT and will take most fastboot commands but I can't get ADB and the drivers loaded to issue any sideload commands.
This is weird.
Hello I have bricked my kindle fire and having similar driver issues I am able to get into fastboot mode with a diy factory cable boot any fastboot command comes back waiting for device . Can I ask where you got drivers please?
I used these:
http://forum.xda-developers.com/showthread.php?t=1890413
I also ran like every single recovery tool out there to help me fix this. After I did fix it, it updated to latest version and there is no root yet for it. I sold it.
If you need help, I think I might still have all the tools I used to get this back to stock and working.
Regards,
rast4man