Database Develop

[Q] NookieComb 4.13OC bugs

First off, this is a great ROM. Since I purchased my NC a couple months ago, I have had CM7 (up to nightly 32), Deeper Blue's 3.0v4 and Ultimate Droid and this one, IMHO works better even with a couple bugs and wonder if anyone else has had the same issues and found a workaround.
1) I get an error message that says "android.process.media has stopped working" and it force closes whatever media I am using except video and also affects the market when I try to download an app. I have cleared the dalvek cache and also reinstalled the ROM and I am still getting the error.
2) Issues downloading and sideloading apps. Some apps, mostly games and wallpapers will force reboot when I try to download or sideload them. For sideload, I have used Root Explorer and Easy Installer.

For first time installation of this ROM, format system, data and cache before the installation.
Worked fine for me.
Cheers!

[Q] How do I get apps2sd ext 4 working on the Nexus one with the latest Cyanogen Mod?

Hey guys, I'm loving my new N1, but I keep running out of room for applications, and I wanted to know if I could implement Apps2sd ext2/3/4 or w.e to make more room. I like to use Cyanogen Mod, but I'm not sure how to implement it. If someone could help me, that'd be great! Thanks!

Ditto.
Sent from my Nexus One using XDA App

Try S2E or Link2ext in the market, our go look up Darktremors. Depending on what you want, the apps should be more than sufficient...

danger-rat said:
Try S2E or Link2ext in the market, our go look up Darktremors. Depending on what you want, the apps should be more than sufficient...
Click to expand...
Click to collapse
When i use darktremors, it doesn't work, but if I type in a2sd reinstall, it says location is read only

Try to fix permissions via ROM Manager. Also, try flashing DT before you flash gapps...

danger-rat said:
Try to fix permissions via ROM Manager. Also, try flashing DT before you flash gapps...
Click to expand...
Click to collapse
I tried that; it didn't work. Also, when I run a2sd reinstall, and reboot, its stuck on rebooting

Try the DT thread... xD

isikh said:
I tried that; it didn't work. Also, when I run a2sd reinstall, and reboot, its stuck on rebooting
Click to expand...
Click to collapse
Not been my experience. Strange that. What works for me...
Boot to recovery of your choice.
Do multiple wipes, both cache + dalvik-cache. Though just one wipe each is likely enough, IMO. Also wipe sd-ext.
Write your CyanMod of choice.
Write your gapps.
Write your DarkTremors. Go with the latest, OR, as others are insisting, stay away from that and go with the previous stable release. Latest works great for me.
Reboot device.
Wait a good minute after arriving at lockscreen and reboot device from lockscreen, OR find Quick Boot in app drawer if your power button is gorked (you'll need a working power button to reboot from lockscreen).
After reboot, wait a good minute at lockscreen. Then Proceed to open terminal session and start playing with a correctly installed (hopefully for you) DT2ext.
Lots of experts out there, but this has always worked for me. If you still need guidance, search in DarkTremor's thread to be advised about your partitions.

zero2cx said:
Not been my experience. Strange that. What works for me...
Boot to recovery of your choice.
Do multiple wipes, both cache + dalvik-cache. Though just one wipe each is likely enough, IMO. Also wipe sd-ext.
Write your CyanMod of choice.
Write your gapps.
Write your DarkTremors. Go with the latest, OR, as others are insisting, stay away from that and go with the previous stable release. Latest works great for me.
Reboot device.
Wait a good minute after arriving at lockscreen and reboot device from lockscreen, OR find Quick Boot in app drawer if your power button is gorked (you'll need a working power button to reboot from lockscreen).
After reboot, wait a good minute at lockscreen. Then Proceed to open terminal session and start playing with a correctly installed (hopefully for you) DT2ext.
Lots of experts out there, but this has always worked for me. If you still need guidance, search in DarkTremor's thread to be advised about your partitions.
Click to expand...
Click to collapse
Thank you, I figured it out.

DT is the best choice, but S2E is simpler than DT, it's avaliable in market

[solved] Bug (PA 2.6/14, kk 126) -- trying to access "About Phone" crashes Settings

Bug (PA 2.6 build 14, kk 126) -- trying to access "About Phone" crashes Settings menu
Long-time lurker, first time contributor -- I would have posted this in the dev forum thread, but unfortunately I'm a newbie (at least by post count) and don't have posting privileges there. Suppose that's what I get for being all silent-like.
Phone model: p990hN (Canada)
ROM: PA 2.6, build 14
Kernel: kk exp 126
Bug occurred shortly after flashing the above (with standard JB gapps) from a full wipe (full wipe/factory reset, wipe system, wipe dalvik), then installing PA, gapps, and kk in that order (followed by some user apps). When attempting to access the "About Phone" sub-menu from the Setting menu, I'm booted out of the Settings app with the error message "Unfortunately, Settings has stopped". Rebooting and trying to access the "About Phone" menu again yields the same response. Also tried clearing data for Settings, but the same behaviour occurs.
Phone operation seems otherwise normal (obviously awesome given that I flashed from a full-wipe something like half an hour ago), and this problem doesn't appear to otherwise affect the user experience, so definitely not an important bug, but just thought I'd get it out there.
(if tonyp reads this -- thanks for everything!)

Edit2: Updated Settings.apk which _should_ fix the Settings FC when going to Settings -> About phone.
Thanks at @kenra for reporting this and sending a log. Another great example why logs are important, as I don't have the ROM flashed there's no way to fix an issue without logs - so keep that in mind
http://tonyp.hopto.org/temp/Settings.apk
Click to expand...
Click to collapse
Remember you have to push it yourself to system/app. Set permessions when done

Custom40 said:
Remember you have to push it yourself to system/app. Set permessions when done
Click to expand...
Click to collapse
Oops, search fail for me. Updating Settings.apk and fixing permissions worked for me. Thanks!

[MODULE] Google Contacts Storage (works with Google Phone)

DESCRIPTION
If you have the Pixel Experience module installed on your phone and installed Google Phone from the Play Store or ever tried to use a patched Google Phone version (such as this one), you may have noticed that Google Phone force closes when you try to search for a contact or while opening the keypad. This Magisk module attempts to fix that and it works by replacing your non-AOSP contacts storage with Google's own version, the one supported by Google Phone.
IMPORTANT NOTES
Supports Android versions from Android 7 (Nougat) to Android P.
It will remove any phone/dialer/contacts/people applications from your phone (if supported) because they are incompatible with Google's Contacts Storage.
You should only install this module if you want/need to use Google Phone and Google Contacts.
TESTED/SUPPORTED DEVICES
HTC 10 (Sense based ROMs).
Note: It should work with other devices but I have no means no test them myself, I can only rely on the community to test this for me.
SPECIAL INSTRUCTIONS
Install the Magisk module as usual but DO NOT reboot your device just yet.
Go into "Settings » Accounts & Sync" and disable "Automatically sync data".
Go into "Settings » Apps" a, look for "Contacts Storage" (it's a system app) and clear application data.
Reboot your device now!
Go into "Settings » Accounts & Sync" and enable "Automatically sync data".
Google Phone should now work without force closing, hopefully.
Note: If you ever want/need to disable this module, you should also follow the procedure above (disable module, disable data synchronization, clear contacts storage data, reboot, and re-enable contacts synchronization).
DISCLAIMER
Install this module at your own risk.
Developer is not responsible for what you do on your device.
Please take all necessary precautions (like a nandroid backup) before installing this module.
DOWNLOADS
Google-Contacts-Storage-v0.0.0-TESTING.4.zip
XDA:DevDB Information
Google Contacts Storage, Tool/Utility for the XDA Community Apps
Contributors
rfgamaral
Version Information
Status: Testing
Current Beta Version: v0.0.0-TESTING.4
Beta Release Date: 2018-08-02
Created 2018-08-01
Last Updated 2018-08-02

@rfgamaral after installing magisk module and rebooting i keep getting android.process.acore has stopped.
I cannot get rid of it. By pressing ok all the time i managed to arrive to Apps but there is no Contact Storage app to clear data/cache after the reboot.

stathis95194 said:
@rfgamaral after installing magisk module and rebooting i keep getting android.process.acore has stopped.
I cannot get rid of it. By pressing ok all the time i managed to arrive to Apps but there is no Contact Storage app to clear data/cache after the reboot.
Click to expand...
Click to collapse
I also got that error when developing this module but I never got it after installing/enabling it, only after disabling it.
For some reason, the system does not recognize the /system/priv-app/ContactsProvider/ContactsProvider.apk (although the file is there). I'm not sure how to fix this to be honest, so I recommend you restore your backup to get you back to a working state. Maybe try the whole process again (makre sure you follow every single step) and instead of rebooting the system after installing the module, reboot to recovery and wipe dalvik/ART and cache. If that doesn't help, restore the device again until a solution for this problem is found.
Like I said, I also had this problem and because I live on the edge, I didn't make a backup of my system (idiot me). I had to make the system recognize the ContactsProvider.apk file and wen into recovery, deleted, copied it back from my ROM, set proper folder/file permissions, wiped dalvik/ART and cache and rebooted, the problem was gone. I installed my module again and it worked. But I'm honestly afraid to disable it and get that error back.
Which is weird because I'm replacing this file systemlessly, that's the whole point of Magisk. Maybe I'm doing something wrong, I'm no expert... We'll probably need help from someone with more knowledge on the whole Android system. But for the record, I currently have the version available on this thread installed on my phone. I have the Pixel Experience module installed and installed Google Phone from the store, it doesn't force close and all features seem to be working. I just need to get this module stable.

@stathis95194 Were you able to restore your device? I hope so... I've uploaded a new test version, didn't change much, not sure if it fixes anything.

rfgamaral said:
@stathis95194 Were you able to restore your device? I hope so... I've uploaded a new test version, didn't change much, not sure if it fixes anything.
Click to expand...
Click to collapse
Yeap I always take a nandroid before messing with the phone. Let me try the new version and report
Sent from my HTC 10 using Tapatalk

@rfgamaral soooo after flashing 0.0.4 i faced the same issue with android.process.acore has stopped popping all the time.
This time i took a different approach and didn't restore my nandroid. Instead i dirty flashed my LeeDroid rom.
Rebooted and lo and behold, stock dialer and contacts were missing and google phone was working perfectly. No crashing on searching (nearby places is working)
Now i need to test caller id and spam filter
I will keep testing and let you know.

stathis95194 said:
@rfgamaral soooo after flashing 0.0.4 i faced the same issue with android.process.acore has stopped popping all the time.
This time i took a different approach and didn't restore my nandroid. Instead i dirty flashed my LeeDroid rom.
Rebooted and lo and behold, stock dialer and contacts were missing and google phone was working perfectly. No crashing on searching (nearby places is working)
Now i need to test caller id and spam filter
I will keep testing and let you know.
Click to expand...
Click to collapse
Awesome, glad you got it working.
Now I just need to understand why installing this module crashes android.process.acore... But it's a bummer that this is happening, a little price to pay, I guess? At least until a fix is found... That and that whole install procedure which is required to avoid other different crashes because of incompatible storages.

Hi
I'm running 2.42.400.3 on U11.
I installed this and google phone from
https://forum.xda-developers.com/android/apps-games/app-google-phone-v14-0-175904292-bubble-t3708218
Dialer kept crashing so I installed your mod.
After that,com.android .phone keeps crashing.
I unistalled it and then I got acore crashing.
I restored feom nandroid but for some reason kept getting the acore crash, so I completely uninstalled magisk.
Now.... everything works. Even the dialer.
I'm really not sure what happened but.... thanks

gunnerhk said:
Hi
I'm running 2.42.400.3 on U11.
I installed this and google phone from
https://forum.xda-developers.com/android/apps-games/app-google-phone-v14-0-175904292-bubble-t3708218
Dialer kept crashing so I installed your mod.
After that,com.android .phone keeps crashing.
I unistalled it and then I got acore crashing.
I restored feom nandroid but for some reason kept getting the acore crash, so I completely uninstalled magisk.
Now.... everything works. Even the dialer.
I'm really not sure what happened but.... thanks
Click to expand...
Click to collapse
That's really weird, on so many levels... :/

Screenshot as proof :laugh:

[ROM][TMOBILE][S7_SM-G930T][Oreo 8.0 Rooted][WifiCalling]

Updated version of this ROM: [ROM][TMOBILE][S7_SM-G930T][Oreo 8.0 Rooted][WifiCalling]G930TUVU4CRI2
ROM last updated: 10/30/2018
Introduction:
HUGE thanks to the guys that got this going like root & figuring out hybrid stocks! This ROM is a complete rewrite of my ROM [ROM][TMOBILE][S7_SM-G930T][Oreo Rooted] That ROM doesnt have WifiCalling & I couldn't get it to work for the life of me, so I rewrote it. I started with stock, and slowly stepped back making changes, reinstalling each time, confirming it still worked. About 200 installs later & 1000s of changes, this is the result. Yes, it took a LONG time. Hope you enjoy it! Don't forget to say Thanks so I know it is actually helpful to others, and continue doing this!
Description:
Stock Tmobile Oreo 8.0 modified (G930TUVU4CRF1)
EXTREMELY debloated! Nearly bare minimum, while still retaining hardware functionality. Eg, Samsung Gallery & Camera exist so we get 4k recording, and there aren't errors when we pull up the Gallery to edit, etc. Yes, this means NO Samsung or Android Pay. There could be more apps to debloat but Im out of time for now! (Please provide suggestions if interested)
Everything possible I replace Samsung with Google
Solid ROM. It was actually kind of slow for me, but I'm curious how this works for others.
Xposed is part of the guide, which will give you infinite customization & tweak-ability
If you hate Samsung SW and just want a solid working ROM with very few install options to get you up and running this is for you.
This will delete all of your data on the phone! (Not external SD card) This is the only way so don't ask. Backup your data!
Features:
Tmobile Wifi Calling works, along with Visual Voicemail & Mobile Hotspot
Many Aroma Installer app options
(Optional) KevinsFavorites option in Aroma. I'm not sure I'd recommend it due to my tastes. If you're looking for some good common apps tho, it includes: Amazon, AmazonMusic, AquaMail, Gmail, GoogleDrive, GoogleKeep, GooglePhoto, Hangouts, IFTTT, Pandora, RootBrowserClassic, TitaniumBackup, Uber, & Wink (If you install these and want to remove them later, use TitaniumBackup (or similiar) to uninstall
Root Features: See Downloads->Recommended Root Zip & say Thanks!
Debloated
De-Knoxed
Decrypted /data/ partition
OTAs disabled
Speed & Build Prop Tweaks
Dual speaker
Ruthless Launcher
Apps
AdAway
AOD Clock Face Themes
CPUSpy
DisableService
Kernel Adiutor
Samsung Video Editor and Trimmer
Xposed
Many more...
Download Links:
Base.7z & Oreo_Kevin71246Modded_v3.#.#.zip
Installation:
This will delete all of your data! If you continue, you acknowledge that the Author is NOT responsible for anything that happens to your phone!
Summary (for Pros)
Flash Oreo stock
Root
Flashfire
Oreo_Kevin71246Modded_v3.1.##, Auto-mount, Mount /system read/write Option
Go through Aroma setup. When finished, it should boot to Recovery (if not do this). Do a "Wipe data/factory reset"->Reboot
Detailed Steps
Install Stock Oreo:
Download mode & Setup
Make sure you have latest device drivers setup on your PC
Enable USB Debugging on phone in Developer Settings
Boot phone into Download Mode:
Turn off your device
Press and hold Volume Down + Home + Power button
When you see the warning screen, release buttons & press Vol UP. Phone should say "Downloading..."
Download and unzip Base.7z to PC (This contains stock Oreo, ODIN, & root)
ODIN
Open ODIN on PC (\Base\Odin_313.exe)
Connect USB from PC to phone. ID:COM in Odin should turn Blue with a COM port
Select AP, BL, CP and CSC files from the \Oreo_Stock\Base\ folder for corresponding files
Select HERO2QLTE_USA_VZW.pit
Select Start
Finished: Phone will reboot & show Carrier screen for 3-5mins. Wait until Setup screen & go through quickly (bare minimum) since you'll wipe it again. Once in Android, go to Settings->Display->Screen resolution->WQHD->Apply
Root Instructions: (+Flashfire, SuperSU)
Reboot phone into Download mode
Odin
AP: Select \Base\Root\AP_SM_G930_OREO_ENG_BOOT.tar
Start-> Wait for phone to boot to Android OS
Root
Double-click \Base\Root\cmd-here.exe & Type: root.bat [enter]
Option: 1 (Install Root No tweaks) (Or pick whatever you want)
*Note: With this system root, do not update su binary. Disable notifications for SuperSU app. Don't flash any superuser zips in recovery that are not made by jrkruse
Install Custom Hybrid ROM & Xposed
Download & copy Oreo_Kevin71246Modded_v##.zip to phone
Flashfire
Open Flashfire on phone
Red + symbol->Flash Zip or OTA->Oreo_Kevin71246Modded_v#, Auto-mount, Mount /system read/write Option->Check mark
Click Lighting bolt at bottom-> OK
Phone will reboot to Aroma. Go through setup. (See above for what's in KevinsFavorites)
When finished, allow Aroma to exit.
It should reboot into Recovery (If not, do this: immediately hold Vol-Up btn+Home btn until you see recovery on screen. If you missed it, try again: hold Vol-Down+Pwr btn ~10sec until phone restarts & immediately hold Vol-Up btn+Home btn until you see recovery on screen.)
In recovery: Factory Reset->Yes->Restart phone
*Wait 5-10min on loading screens
Go thru Android setup. Ignore "Xposed Installer has stopped" error
Followup-Steps:
Set Dialer: Phone Settings->Apps->Menu->Default Apps->Calling App->Select Phone
Recommendations:
Xposed
Setup Xposed: Xposed Installer app:Install framework option & restart phone
Xposed Installer app: Settings button (3 lines)->Download->Search "GravityBox [O]"->Click it->Versions tab->Download->Install->Back arrow (upper left)->Settings->Modules->Check box next to GravityBox [O]->Restart phone
GravityBox [O] Tweaks: (Open GravityBox app)
Battery indicator: Statusbar tweaks->Battery settings->Turn on Master switch->Battery indicatory style: None->Battery percent text...->Back
Clock: Statusbar tweaks->Clock settings->Turn on Master switch->Center clock...
Firefds Kit [O] Tweaks: (Install same way as Gravity box)
This is a supplement to Gravitybox. Things of note: Advanced power menu, call recording, & disable bluetooth toggle popup, etc
Known Issues:
Visual Voicemail may fail to register, but restart phone and give it a few hours. It works eventually.
RCS (Rich Communication Services/AdvancedMessages/Chat) texts don't show up in Android Messages & Textra, etc apps (This is an issue on stock as well!!)
Fix: (Use Samsung Messages)
How to Install Samsung Messages via ADB (Easiest way though is just reinstall!):
Download Messaging_SEP81.zip, unzip, & manually copy apk to phone via usb/Windows My Computer
adb shell (Get into shell to run beow commands)
su (Run as root)
mount -o rw,remount /system (Mount system read/write since default it read-only)
chmod 755 /system/priv-app/Messaging_SEP81 (Set permissions on folder)
chmod -R 644 /system/priv-app/Messaging_SEP81 (Set permissions on apk file)
ls -l /system/priv-app/Messaging_SEP81 (Check permissions - Should be: -rw-r--r-- 1 root root - not sure what 1 & 2 is)
ls -l /system/priv-app | grep "Messaging" (Check permissions - Should be: drwxr-xr-x 2 root root)
reboot (Reboot device)
Changelog:
Version 3.1.32: First stable build
Ver 3.1.36:
-Disabled encryption on /data/ partition to resolve "Bluetooth paired devices deleted after reboot" issue & so mods play nicer with ROM
-Fixed "Device not supported" error on Google Phone app
Ver 3.1.37:
-Added most of the apps I replaced or added as options in Aroma Installer now
Credits:
- @jrkruse & @klabit87 for Root
- @partcyborg for helping jrkruse
- @jrkruse for his similar ROMs as guides & help
- @Lanc-City for assistance in ROM modding
- @gustco for eng boot.img
- @Raymonf for modified odin
- @amarullz for Aroma Installer
- @Chainfire for FlashFire & SuperSU
- @rovo89 for Xposed
- @JaeKar99 for the cool & colorful boot animation
- @mrRobinson for AdAway ADAway.org
- Brandon Valosek for CPUSpy
- WangQi for DisableService
- Willi Ye for Kernel Adiutor
- @shubby for Ruthless Launcher
- @Craz Basics for Dual Speaker Mod
...
- Please PM me if you were forgotten!

Some screenies:

Saved2

Saved3

Well nice job!

jrkruse said:
Well nice job!
Click to expand...
Click to collapse
...but your'e the best! (You & I both know I couldnt have done it without all your other work!)
Once I FINALLY got WifiCalling to work, I thought... Imagine ALL the S7 XDA members out there with crappy Tmobile signal across Rural America that could TOTALLY use Wifi Calling!!! Haha, but seriously!! & that thought was the birth of this thread

kevin71246 said:
...but your'e the best! (You & I both know I couldnt have done it without all your other work!)
Once I FINALLY got WifiCalling to work, I thought... Imagine ALL the S7 XDA members out there with crappy Tmobile signal across Rural America that could TOTALLY use Wifi Calling!!! Haha, but seriously!! & that thought was the birth of this thread
Click to expand...
Click to collapse
Is this Ufirm firmware?

jrkruse said:
Is this Ufirm firmware?
Click to expand...
Click to collapse
I have so many FW packages on my PC at this point, from so many places that I used while trying to get this to work, but I think it might be a package from one of your threads(?) Since I'm not exactly sure what you're asking regarding "Ufirm FW", I'll elaborate hoping that answers your question. (Tho I'm thinking you mean the U variation/unlocked. So based on these stock files below I guess the answer is no.) If you're question is really, "is it possible to get tmobile wifi calling to work on a U model #", then I'd have to really think about that. But at this point I don't have an answer. I can tell you a million dependencies about it tho! (I seriously have hundreds of revisions I made while testing, & notes. The symbolic & meta links in Aroma initially broke it, as I found out after a week or so of testing - wish I knew a bit more about them, and why they're all there, then I'd know what was wrong about them...)
High-level process:
1)Flash Base/Stock/Oreo Rom:
- AP_G930TUVU4CRF1.tar
- BL_G930TUVU4CRF1.tar
- CP_G930TUVU4CRF1.tar
- CSC_TMB_G930TTMB4CRF1.tar
- HEROQLTE_USA_VZW.pit
2)Root with your method
3)Flash Xposed framework & my ROM (it's a "start with stock then remove what we don't want" type of Aroma/Edify script)

jrkruse said:
Is this Ufirm firmware?
Click to expand...
Click to collapse
BTW, any idea how to prevent the "verification failed" error I mention in the OP steps, after flashing Xposed framework? I tried flashing dm-noverity but no luck. At least my guide covers it at this point tho... Thanks again

kevin71246 said:
BTW, any idea how to prevent the "verification failed" error I mention in the OP steps, after flashing Xposed framework? I tried flashing dm-noverity but no luck. At least my guide covers it at this point tho... Thanks again
Click to expand...
Click to collapse
If you choose the keep safestrap option during root the it will flash the system/vendor/etc/ fstab.qcom that totally removes data encryption but when that fstab.qcom is flashed it also requires a data wipe for phone to boot then when you install xposed you won’t see that error but either way you end up wiping data so your choice
Sent using some kind of device I modified

It works perfectly!!
I have not had any problems so far, here I leave you for the link to download and try those who are interested in VIPER4ANDROID: https://drive.google.com/file/d/1572ORe6TOrsRBuxWWBChH-WMnxkvcUjH/view?usp=drivesdk
You just have to flash it with Flashfire, but if you do not pull them, let me know Thank you very much !!! Kevin for the effort!
---------- Post added at 10:17 PM ---------- Previous post was at 10:15 PM ----------
I have not had any problems so far, here I leave you for the link to download and try those who are interested in VIPER4ANDROID: https://drive.google.com/file/d/1572ORe6TOrsRBuxWWBChH-WMnxkvcUjH/view?usp=drivesdk
You just have to flash it with Flashfire, but if you do not pull them, let me know Thank you very much !!! Kevin for the effort!

First, I want to thank you so much kevin71246. I tried your previous version as I was sick and tired of how sluggish my phone felt after the last two T-Mobile OTA updates. So far the experience on the phone has been great but I wanted to post about an issue I had with that version to see if anyone else has come across it or can figure out what is going on. The reason I am making this a reply in this thread instead of your other is because I will be flashing this update shortly but I want to get the ball rolling on the issue first.
I went through the whole process, installing the minimum with Google Apps, though I did restore everything previously installed once I log in with my Goggle Account. I am unsure if this contributed to the problem but I will not be restoring apps on the next try. It seems no matter what process I attempt to connect my Ticwatch E to my S7 the Wear OS app will not recognize it which causes the watch to get stuck in the setup phase, making it useless. This was after multiple and different connection attempts, resets, reboots and factory (watch only) restores. The watch will show up under bluetooth and create the initial connection but it will not stay connected. Anyone have any idea? Is this ROM missing something?
Edit: Mid way through the install, I wanted to note that I checked for the issue after doing the "Install Stock Oreo" but before Root and everything worked as it should. Wear OS sees the watch instantly and Bluetooth connects fine.
Edit: So I am a day into using the ROM and I am still having issues. While it will connect and work perfectly fine now, when ever I do a reboot of the phone the watch no longer connects. I will just get constant Bluetooth Connection Requests, every single time the watch tries to get data, and it never actually connects. To fix this I need to do a complete reset of the watch and do the whole setup process again. As you can imagine this is no good, expecting to wipe my watch every time my phone reboots makes it still almost useless.

charredchar said:
First, I want to thank you so much kevin71246. I tried your previous version as I was sick and tired of how sluggish my phone felt after the last two T-Mobile OTA updates. So far the experience on the phone has been great but I wanted to post about an issue I had with that version to see if anyone else has come across it or can figure out what is going on. The reason I am making this a reply in this thread instead of your other is because I will be flashing this update shortly but I want to get the ball rolling on the issue first.
I went through the whole process, installing the minimum with Google Apps, though I did restore everything previously installed once I log in with my Goggle Account. I am unsure if this contributed to the problem but I will not be restoring apps on the next try. It seems no matter what process I attempt to connect my Ticwatch E to my S7 the Wear OS app will not recognize it which causes the watch to get stuck in the setup phase, making it useless. This was after multiple and different connection attempts, resets, reboots and factory (watch only) restores. The watch will show up under bluetooth and create the initial connection but it will not stay connected. Anyone have any idea? Is this ROM missing something?
Edit: Mid way through the install, I wanted to note that I checked for the issue after doing the "Install Stock Oreo" but before Root and everything worked as it should. Wear OS sees the watch instantly and Bluetooth connects fine.
Edit: So I am a day into using the ROM and I am still having issues. While it will connect and work perfectly fine now, when ever I do a reboot of the phone the watch no longer connects. I will just get constant Bluetooth Connection Requests, every single time the watch tries to get data, and it never actually connects. To fix this I need to do a complete reset of the watch and do the whole setup process again. As you can imagine this is no good, expecting to wipe my watch every time my phone reboots makes it still almost useless.
Click to expand...
Click to collapse
I believe I know what the issue is, I'm testing a fix (for THIS ROM) as we speak. Stay tuned. Maybe tomorrow if I have time and it works I'll update the OP. BTW, this ROM and my other ROM are TOTALLY different. Thanks for the feedback!

FranMLG said:
I have not had any problems so far, here I leave you for the link to download and try those who are interested in VIPER4ANDROID: https://drive.google.com/file/d/1572ORe6TOrsRBuxWWBChH-WMnxkvcUjH/view?usp=drivesdk
You just have to flash it with Flashfire, but if you do not pull them, let me know Thank you very much !!! Kevin for the effort!
Click to expand...
Click to collapse
What do you mean by this? "but if you do not pull them, let me know"
And tell me more about Viper4Android, and if it works solid for you on this ROM...then I'll consider adding it. Thanks!

New version, see change log in OP for details.

Yeah i.a give this a shot in a little. Do I need to root phone or can I just flash through Odin. Sorry not used to this locked bootloader crap..... s8crj1 are the last 6 digits of the software I'm on. I did receive the latest update will this effect me installing this. Sorry as I said not used to this locked bootloader crap.

jrkruse said:
If you choose the keep safestrap option during root the it will flash the system/vendor/etc/ fstab.qcom that totally removes data encryption but when that fstab.qcom is flashed it also requires a data wipe for phone to boot then when you install xposed you won’t see that error but either way you end up wiping data so your choice
Sent using some kind of device I modified
Click to expand...
Click to collapse
Hi, why you have to flash this - HEROQLTE_USA_VZW.pit on 930t, is it ROM specified? if I do and don't then what are pro and cons?
---------- Post added at 01:36 PM ---------- Previous post was at 01:26 PM ----------
josh2020glacier said:
Yeah i.a give this a shot in a little. Do I need to root phone or can I just flash through Odin. Sorry not used to this locked bootloader crap..... s8crj1 are the last 6 digits of the software I'm on. I did receive the latest update will this effect me installing this. Sorry as I said not used to this locked bootloader crap.
Click to expand...
Click to collapse
since bootloader is locked you can't use TWRP so you have to use Flashfire to install this ROM, as you know flashfire required root so you have to setup the base per OP and then root the base then install the ROM and then root it again, read the first page I don't think you will get a instructions more detailed then his

Okay so I just realised I was posting comments on the old thread, my bad. Coming back to the question, can the boot animation be changed? I've messed with the qmg files in an attempt to replace the weird, nauseating rainbow animation but even after overwriting the latter, it persists. Looking forward to a reply kek

Alkan3 said:
Okay so I just realised I was posting comments on the old thread, my bad. Coming back to the question, can the boot animation be changed? I've messed with the qmg files in an attempt to replace the weird, nauseating rainbow animation but even after overwriting the latter, it persists. Looking forward to a reply kek
Click to expand...
Click to collapse
Nauseating rainbow? LOL. Sorry. This is much more of a general question though, that wouldn't exactly pertain to this ROM specifically. And given I don't have an answer, I'd try searching BootAnimation How-Tos to get this customized. The ONLY thing I did regarding this was replaced the existing files with the rainbow ones. That's it. Apologies in advance.

Just discovered an issue: RCS (Rich Communication Services / Chat) texts don't show up in Android Messages app. See "Known Issues" in OP for a solution. BTW I posted a new ROM version a few days back that allows many choices in Aroma Installer. Make sure to pick Samsung Messages (instead of Google), so you get RCS chat text messages!