Database Develop

Help possibly bricked phone

I don't know what it is with my luck...
But I really need help.
So I flashed a custom ROM, the Hybrid Revolt Rom to be exact, and accidently disabled the recovery.
So I tried to flash TWRP via flashtool and now all I have is a blank screen when I boot up.
PLEASE HELP

I was able to solve my own problem, yet again. I apologize for panicking...
But I am willing to explain how I fixed it.
So the problem was that I had installed the Revolt Rom only to realize I wanted a different one. Unfortunately, I disabled recovery mode. So I had no form of recovery to flash it. From here, I tried to flash TWRP using flashtool, which evidently did not work and wound up leaving me with a phone that only had one display option: Blank Screen. lol And I panicked.
However, I calmed down and searched XDA. There was another form where a guy had killed his xperia almost as bad as I did. And if his Xperia Z still isn't working, then maybe this will help. (He flashed a GS3 ROM on his XZ)
I used the flashtool to flash DoomKernel, first. I had to turn of the device, forcefully, but holding the power button and volume up until it vibrated once, then three times, consecutively. From there, I got it into fastboot mode by holding down the volume up and reconnecting the device to the computer.
I was able to successfully flash the kernel, and then I powered off the device again and disconnected it from my PC. Finally, I held the volume down button down, reconnected it, getting into flashmode. From there I flashed TWRP, which somehow gave me CWM... But I'm not complaining...
Now I just did a clean wipe, installed the ROM I wanted, and am about to reboot.

[Q] Help needed: tried to install Cyanogen 11, can't boot.

Hello all! So, I tried to install CM11, the one on this post.
Went into CWM, did Wipe data factory reset and formatted /system. when I tried installing the rom, it said operation aborted and it could not install it. No biggie, the post says to install cm10.2 before doing so.
So i Powered the phone off to copy the file over to the SD. To my surprise, now I can't get into CWM, Philz, TWRP, fastboot or flashmode. Whenever I press the back pin to power the phone off, it turns back on automatically before I have time to press the key and connect the USB cable. Furthermore, when I manage to do it quick enouhg, the green led lights up, but it fades away after 10ish seconds only to display the sony logo again, and a "can't recognize USB device" popup comes up in my PC. I've used flashtool with this same pc in the past, so I don't know what that is about. Also, whenever I try installng flashtool drivers again, just in case 2 things happen:
there is no xperia SP device listed and whatever i select it fails to install.
What can I do now? I had 4.3 with the eXistenZ Ultra ROM before all of this.
Damm, this is the first time this happens to me, I've been swapping roms for ever, and this is not even the first phone i do this in, had a galaxy s2 and a wildfire S before. I feel like such a noob
UPDATE!:
So I finally managed to fix it. I posted this after about 8-9 hours of trying to get into fastboot on the 3 different pcs in my household, all had the drivers at some point and i've worked with them and fastboot and this same phone previously, so I figured they'd still work. They didn't, I couldnot even get SUS to work. So i went to a 4th PC, installed SUS and the needed drivers and it only took like 40 minutes worth of tries. I'm in the software download part of the SUS, i'll keep this updated!
UPDATE2!:
So, it finished downloading but it suddenly disconnected, tried again for about 10 minutes and then got it going again. Downloaded the second time and installed it successfully. Leaving this up for future reference!
Bottomline: if you can't get into flashmode, try on as many PCs as you have available for at least 30 minutes each.

Don't use flash tools just install CM11 with CWM or something, use doomlord kernel to get CWM and install CM11 zip that's it.
Sorry locked boot loader didn't read it correctly don't use my advice .

Th3Duck said:
Don't use flash tools just install CM11 with CWM or something, use doomlord kernel to get CWM and install CM11 zip that's it.
Sorry locked boot loader didn't read it correctly don't use my advice .
Click to expand...
Click to collapse
No problem, it kinda sorted itself out by brute force connections :> Dammed sony, locking the bootloaders for real. I even got the sim unlock code from my phone company and it's still not bootloader unlockable at the phone settings, even though i can now get any sim i want in it -.-

[HELP] :( Xperia Z C6602 won't turn on - Flashes 3 times a red light

Help, First time flashing a ROM on a Sony phone. I have experience flashing, unlocking bootloaders and rooting, etc... but I normally do this on my Samsung phones.
So... This is what happened. I recently tried to change my Sister's Xperia Z (C6602) ROM so I could try if I could get 4k video out of its incredible camera. But I didn't have any knowledge on how it is done on a Sony phone. I researched on various sites how it is done.
First I saw NUT's dual Recovery and I downloaded it so I could get Recovery on the phone. I downloaded it and I tried using the third option which includes rooting. But I couldn't get it to work. It seemed like it couldn't root the phone properly. So I tried using vRoot (failed), tried an utility that I found while researching and I got it to root. Went back to NUT's dual recovery, installed Recovery, everything wen't excellent to this point. Sister didn't made backup so I couldn't flash the ROM yet.
Researched how to Unlock the Bootloader, saw that Sony let developers unlock the bootloader and I did it using fastboot and the code from Sony, the wrong part is that I didn't backup the TA Partition (Had TA Backup utility XDA site open on chrome but didn't use it since I thought nothing would go wrong if I didn't make a backup of the TA partition) and yes I lost the DRM keys... After this I found out that loosing DRM keys means no Bravia Engine, Music ID, etc... (I hate you SONY )
After loosing DRM keys, I was worried that my sister would kill me, so I searched trough XDA and found that you could get some functionality back from recovering the TA partition and flashing a zip from jimRnor but I needed to flash 10.5.A.0.230 ftf using flashtool. So I did it. relocked bootloader, flashed 10.5.A.0.230, booted to 10.5.A.0.230, turned off the phone, unlocked bootloader using flashtool, used recovery to flash the zip, and done.
So this is the part where I made the phone not work... (And I deleted some of my sister's photos because unlocked bootloader without backing up woopsies)
Sorry for the long story...
Wen't to recovery, tried to flash iHackers v5.2 but somehow the file didn't downloaded correctly, got some errors during installation and I turned off the phone to go check what happened that I couldn't get the zip to flash. And by turning off the phone. It somehow got corrupted or something and now the phone won't turn back on. It stayed with the LED on red. I found it strange so I pressed Power + VolUp for like 5 seconds and it turned off, and then I tried turning it on again and nothing happened. Tried different combinations and nothing would happen. lastly I tried using Power + VolUp + VolDown for 20 seconds and now it is flashing 3 times a red light on the LED. and this is how it has been for a while.
So please, has anyone had any experience with this type of problem, what should I do and what I need to learn for the next time.
P.D. Yes, I didn't know that Flashtool could do everything from rooting, backing up TA partition, unlocking/locking bootloader. I found out after I had some time using the utility.
P.D. I can't get access to neither flash mode or fastboot mode, PC won't recognize the phone.

NgZeng said:
Help, First time flashing a ROM on a Sony phone. I have experience flashing, unlocking bootloaders and rooting, etc... but I normally do this on my Samsung phones.
So... This is what happened. I recently tried to change my Sister's Xperia Z (C6602) ROM so I could try if I could get 4k video out of its incredible camera. But I didn't have any knowledge on how it is done on a Sony phone. I researched on various sites how it is done.
First I saw NUT's dual Recovery and I downloaded it so I could get Recovery on the phone. I downloaded it and I tried using the third option which includes rooting. But I couldn't get it to work. It seemed like it couldn't root the phone properly. So I tried using vRoot (failed), tried an utility that I found while researching and I got it to root. Went back to NUT's dual recovery, installed Recovery, everything wen't excellent to this point. Sister didn't made backup so I couldn't flash the ROM yet.
Researched how to Unlock the Bootloader, saw that Sony let developers unlock the bootloader and I did it using fastboot and the code from Sony, the wrong part is that I didn't backup the TA Partition (Had TA Backup utility XDA site open on chrome but didn't use it since I thought nothing would go wrong if I didn't make a backup of the TA partition) and yes I lost the DRM keys... After this I found out that loosing DRM keys means no Bravia Engine, Music ID, etc... (I hate you SONY )
After loosing DRM keys, I was worried that my sister would kill me, so I searched trough XDA and found that you could get some functionality back from recovering the TA partition and flashing a zip from jimRnor but I needed to flash 10.5.A.0.230 ftf using flashtool. So I did it. relocked bootloader, flashed 10.5.A.0.230, booted to 10.5.A.0.230, turned off the phone, unlocked bootloader using flashtool, used recovery to flash the zip, and done.
So this is the part where I made the phone not work... (And I deleted some of my sister's photos because unlocked bootloader without backing up woopsies)
Sorry for the long story...
Wen't to recovery, tried to flash iHackers v5.2 but somehow the file didn't downloaded correctly, got some errors during installation and I turned off the phone to go check what happened that I couldn't get the zip to flash. And by turning off the phone. It somehow got corrupted or something and now the phone won't turn back on. It stayed with the LED on red. I found it strange so I pressed Power + VolUp for like 5 seconds and it turned off, and then I tried turning it on again and nothing happened. Tried different combinations and nothing would happen. lastly I tried using Power + VolUp + VolDown for 20 seconds and now it is flashing 3 times a red light on the LED. and this is how it has been for a while.
So please, has anyone had any experience with this type of problem, what should I do and what I need to learn for the next time.
P.D. Yes, I didn't know that Flashtool could do everything from rooting, backing up TA partition, unlocking/locking bootloader. I found out after I had some time using the utility.
P.D. I can't get access to neither flash mode or fastboot mode, PC won't recognize the phone.
Click to expand...
Click to collapse
your phone is xperia Z this forum is for xperia z1, firmwares are diff my have a chance to brick ur device i think, better to go ahead on xperia Z forum and find stock ftf and flash.

mizukage said:
your phone is xperia Z this forum is for xperia z1, firmwares are diff my have a chance to brick ur device i think, better to go ahead on xperia Z forum and find stock ftf and flash.
Click to expand...
Click to collapse
Hahaha woops, wrong forum, going back to Xperia Z forum :cyclops:
And Btw I can't flash anything phone won't even boot to Flash mode...

Sony Xperia SP stuck on Sony logo screen, can't open recovery, flashtool also fails

Having gotten a spare Xperia SP, I decided to venture into the realm of flashing custom ROMs. This was the first time I did anything of this sort with an Android device. So, here is what I did to it today:
At first, I successfully rooted, installed recovery and flashed CM12. After fiddling with it for about an hour and not finding anything super exciting, I decided to try out other ROMs. I did a facotry reset, wiped the data and cache, and was about to flash CM11 (I forgot that it required an unlocked bootloader, which I don't have, and the recovery console told me so). Maybe at this point I should have just reflashed CM12, but I chose (not even sure why at this point) to exit recovery instead. After this, the phone keeps getting stuck on the Sony logo (although on the second attempt to turn it on, it did display a screen showing that wrench icon, indicating some sort of configuration activity going on, but never moved past that either). I tried flashing two different stock ftf roms with flashtool, both fail with this error: Processing of system.sin finished with errors. One of them will cause the phone to shut off after about a minute on the logo instead of remaining stuck on it indefinitely.
Maybe I should mention that this phone did not exactly work flawlessly for some time, even before I started experimenting with it. Here are the main things that I can remember it doing:
-Lags on even the basic functions, apps often crashing, despite doing a very recent hard reset.
-Battery drains very fast sometimes (like going from 55% to 0 in about 2 hours with almost no usage).
-A few months ago, it would periodically freeze and reboot itself, but that problem seemed to disappear with time.
Did I do something stupid to that phone, or are there internal/hardware problems that have manifested themselves in this way? I won't be horribly upset if I killed it (after all, knowing that something of this sort may happen was exactly the reason why I was not doing all this on my main phone), but I certainly would like to get it back up and running.

Download Flashtool v0.9.18.6 from official site.
Option 1: Flash stock.
or,
Option 2: Flash tangerine-7.1.elf via 'fastboot mode' to directly get TWRP, then flash any ROM you want.
https://dl.cubeserver.eu/TechnoSparks/tangerine-stuffs/tangerine-7.1.elf

nandan21 said:
Download Flashtool v0.9.18.6 from official site.
Option 1: Flash stock.
or,
Option 2: Flash tangerine-7.1.elf via 'fastboot mode' to directly get TWRP, then flash any ROM you want.
]
Click to expand...
Click to collapse
Thank you for your reply. I have a few questions:
I downloaded the flashtool version that you mentioned (from the official site), but avast detected malware in it. Should version 9.19.8, the one I tried yesterday, work fine?
What is exactly considered "stock rom"? Is it exclusively the version your phone came with, or is it firmware of any version/carrier branding, as longs as it is made for your phone model by the manufacuter?
It looks like my phone actually won't stay in flash mode. I select fastboot mode in flashtool, a window pops up asking me to plug in the phone. I press the volume down button and plug it in, the LED glows bright green, but nothing happens in flashtool. After a few seconds, the LED goes red and the Sony logo appears on the phones screen (as if it was going to turn on), and my computer makes a sound as if the phone was ejected. The phone shuts off a minute later, goes into flash mode again, and the cycle repeats.

UPDATE
Nevermind everything I wrote before, I was able to successfully re-flash stock. Turns out I did in fact have some crappy version of flashtool that didn't work, and I found anolder version without malware.
Strangely, the infected flashtool version was the one I dowloaded from the official site... Something is fishy here.
Anyways, thanks a bunch for your help!

MrDroid15 said:
Thank you for your reply. I have a few questions:
I downloaded the flashtool version that you mentioned (from the official site), but avast detected malware in it. Should version 9.19.8, the one I tried yesterday, work fine?
What is exactly considered "stock rom"? Is it exclusively the version your phone came with, or is it firmware of any version/carrier branding, as longs as it is made for your phone model by the manufacuter?
It looks like my phone actually won't stay in flash mode. I select fastboot mode in flashtool, a window pops up asking me to plug in the phone. I press the volume down button and plug it in, the LED glows bright green, but nothing happens in flashtool. After a few seconds, the LED goes red and the Sony logo appears on the phones screen (as if it was going to turn on), and my computer makes a sound as if the phone was ejected. The phone shuts off a minute later, goes into flash mode again, and the cycle repeats.
Click to expand...
Click to collapse
Use flashtool 0.9.19.8 because that is what everyone is recommending now, Stock rom defines as what it originally comes from your phone which is manufactured by sony. To get into fastboot mode turn off your phone by taking off the cover off your xperia sp and use a pin or pen to press into a small dot and you will get 3 vibrations.
This guide is not written by me, so give credit to chris10286
Step 1. Download a kernel with twrp embedded im sure I used dooms kernel as far as I remember. There are many others just do a simple google of xperia sp kernel with recovery.
Step 2 . take phone case off the back hold button in on lower bottom for 10 seconds you will get 3 vibrations . good leave it at that.
Step 4 . open flashtool let it load completely. Now plug USB into your phone also have it into your PC ! Whilst plugging in hold down volume button to enter flashmode your phone should be green . hold up for fast boot mode which is blue either too let's you flash a kernel but fast boot mode requires "elf" kernel.
Step 5. Locate kernel install and then boot phone up whilst press the volume up button as its booting recovery mode will be accessed now flash rom of your choice or use Sony PC suite to go back to stock. Make sure you have stock kernel and bootloader locked or else it won't let you..
Use this thread to help you since i had the similar problem which involved my phone: http://forum.xda-developers.com/showthread.php?p=63660062#post63660062
If none of my methods work please ask zenith to help you or ask anyone in the xperia sp forum to help you since im not a developer but ran into a similar problem to yours.
I hope this helps you out in someway as it did me good luck.
Thanks Nandan

Thank you, I very much appreciate that you took the time to write this long post to help me out. As I mentioned in an earlier post, I found a solution to my problem - by using flashtool 9.18.6 (the one that wasn't working was actually newer).

Hard-bricked or soft bricked Z1?

I bought an used Z1 yesterday from local stores. As I'm new to Sony stuffs, I started to play around with my new toy
Well, as a result, it's now a paperweight instead of a "toy"
Short story: I did tons of Googling about how to properly install TWRP to this Z1 (my model is 3G - C6902 btw). First I found XZDualRecovery and it was working perfectly
As I saw, the built-in TWRP 2.8.7.0 is too old, so I tried finding methods to install latest TWRP on my device. I found that it could be achieved by installing TWRP image into FOTAKernel and use volume-up to boot recovery from it (as I said, I'm a noob, just blame me), but what I get now is a complete black screen (FYI, before the brick, my phone has dead LED and vibration). Volume-up for fastboot doesn't work, and the same with flashmode
My question is: What should I do now to unbrick it?

I was playing with a Z1 today and thought I had bricked it. Try pressing Vol up+down+hold power key. This should at least reboot/shut down the phone.
Use fast boot as per usual instructions for installing TWRP and hopefully that will sort it out for you.

Yeah I did tried those methods. The interesting fact is that my phone has dead LED and vibration, and at that time my battery is also empty so I thought I accidentally hard bricked it xD
I left it charging through night and it's back to life again after restoring using Flashtool