The below information is obsolete. Please use the official obake version of CM12 for support on 2013 Droid devices.
A small patch I put together to make the new CM11 Ghost builds work (kinda) on the 2013 Droid Ultra series phones (Mini, Ultra, Maxx). It may also work for other Ghost based ROMs, but I haven't tested this.
So far, it's been lightly tested on the Droid Ultra M (Mini), and Droid Ultra Maxx. No guarantees, but it's been working okay so far for me.
Thanks to @an21281 for testing, and @mainbord for the original Droid Mini bins. Thanks also to the CM team for supporting us without even knowing it. =)
YOU ACCEPT RESPONSIBILITY FOR ALL RISKS BY CHOOSING TO USE THIS PATCH
- If it breaks your phone, you get to keep both halves. If it eats your data, not my problem. Etc, etc.
- If you are lazy or like to take shortcuts, definitely don't use this.
Requirements:
- Unlocked bootloader. Phone should be on newest stock bootloader, radio, etc. (4.4.4 currently)
- Philz recovery for ghost: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/ghost/
- CM11 Ghost: CM11 Ghost
- GApps. I use the PA Nano package: PA Gapps
Instructions:
- Boot to recovery, and wipe data and cache.
- Install CM11 Ghost, then GApps, then the patch
Notes:
- This is done in my free time, and isn't something I plan on supporting. If I have time, I may make updates.
- I'm not actually using CM11 on my phone at the moment, so can't test things currently.
- TWRP for ghost doesn't set the right properties. Go bug them.
- The huge "full" GApps packages can fill up /system and break ****.
Changelog:
0.6 - 4.4 bins
0.8 - 4.4.4 bins
** Please search the forum or Google your question before posting. Thanks! **
Thank you so much!!
Man, i kept trying to figure out how to rewrite the build.prop and change the binaries to be able to flash the ones that switched to the ghost source. I really, really, appreciate this patch. Maybe with the present state of BL unlock and the super cheap price on the maxx we will actually (for once) see a large amount of development for the msm8960dt branch and not just be limited to the ghost builds. thank you for this, again.
Thanks for taking the time to make this patch, everything has been working perfectly so far!
kitcostantino said:
Man, i kept trying to figure out how to rewrite the build.prop and change the binaries to be able to flash the ones that switched to the ghost source. I really, really, appreciate this patch. Maybe with the present state of BL unlock and the super cheap price on the maxx we will actually (for once) see a large amount of development for the msm8960dt branch and not just be limited to the ghost builds. thank you for this, again.
Click to expand...
Click to collapse
Glad to hear it's working for you.
At least as far as the Maxx goes, all the heavy lifting was done by the CM11 folks.
The patch for the maxx is one binary file for the button lights, two simple configs, and a few lines in build.prop.
I'll be curious if the patch works for the plain Ultra.
Rottgrub said:
Glad to hear it's working for you.
At least as far as the Maxx goes, all the heavy lifting was done by the CM11 folks.
The patch for the maxx is one binary file for the button lights, two simple configs, and a few lines in build.prop.
I'll be curious if the patch works for the plain Ultra.
Click to expand...
Click to collapse
Droid mini CM, keys and sound works!
This patch is going to be very useful if Lollipop is going to integrate the best of Motorola. This means I'll be able to flash CM ghost and still have native active display or whatever it is called in the Nexus 6. At that point, the customs ROMs will actually be relevant to the Moto X and Droid Maxx.
Sent from my iPad using Tapatalk
mainbord said:
Droid mini CM, keys and sound works!
Click to expand...
Click to collapse
Great! Thanks for getting the ball rolling! Guessing you figured out the camera problem you were having? (I was guessing maybe a gapps issue with the Google Camera?).
Problem with camera was in 19oct nightly, i installed 21 oct build and it works. Sorry for my english.
mainbord said:
Problem with camera was in 19oct nightly, i installed 21 oct build and it works. Sorry for my english.
Click to expand...
Click to collapse
Your English is fine. Thanks for the warning about that build date.
So when CM has a lollipop build (CM12?), we might be able to use this patch and have the Google version of Active (Ambient) Display? The only thing that keeps me from running CM is lack of a smooth working Active Display. This would be great news!
What happened to half of the pages in this thread
Sent from my XT1080 using Tapatalk
nubia11 said:
What happened to half of the pages in this thread
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
I asked the mods to clean up the off topic posts. The posts removed were requests for information either already contained in the first post, or easily found with a quick Google search. Unfortunately, these sorts of posts contribute nothing to the discussion, and make it hard for readers to find actual data when/if they have problems.
That said, I'm glad people were able to help you out. Have you had any luck getting it working?
No. I'm not sure if I can use twrp ghost on my XT1080.... If so I will try it and let you / others
Sent from my XT1080 using Tapatalk
---------- Post added at 10:45 AM ---------- Previous post was at 10:44 AM ----------
nubia11 said:
No. I'm not sure if I can use twrp ghost on my XT1080.... If so I will try it and let you / others know
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Sent from my XT1080 using Tapatalk
It isn't working... Here is what I get... "This package is for device xt1056" also... Error executing updater binary in zip/sdcard/cmghost/cm-11 11 20141023-nightly..........and so on. Any ideas?
Sent from my XT1080 using Tapatalk
I'm just wondering if maybe I didn't flash something right. You would think that the patch would go first but I did exactly what was in the op
Sent from my XT1080 using Tapatalk
nubia11 said:
I'm just wondering if maybe I didn't flash something right. You would think that the patch would go first but I did exactly what was in the op
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Install Philz CWM recovery. Boot to recovery, and wipe data and cache.
Install CM11 Ghost, then GApps, and only then the patch.
Thank you
Sent from my XT1080 using Tapatalk
I'm getting flashing error
aneeshmbabu said:
I'm getting flashing error
Click to expand...
Click to collapse
Make sure you're using Philz recovery.
Sent from my XT1060 using Tapatalk
jakereeves31 said:
Make sure you're using Philz recovery.
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
I'm using twrp , how to flash philz recovery.. I already installed twrp.. Thanks for ur help , step wise help needed for flashing philz recovery.. My model xt1080,droid maxx
Related
CM10.1 UNOFFICIAL (PREVIEW) for Droid Razr HD (XT926) - Consumer and Developer Edition
Well I have been working for a while and decided to release a preview build MEANING IT'S JUST A GLIMPSE OF THINGS TO COME NOT A DAILY DRIVER ....So here it is CM10.1 (4.2.1) for the Droid Razr HD. This will work on both the retail consumer edition with SafeStrap3 and on the developer edition with CWM or TWRP recovery.
Thanks as always to:
Hashcode for always answering my questions
DroidTh3ory for getting me into this
Epinter for helping me get the ball rolling and fixing wifi and other things
Google for the source and awesome android
CM for all the mods and code fixes
Click to expand...
Click to collapse
OK first things first:
SafeStrap Version 3 for Consumer edition can be found here: http://goo.im/devs/H...rap-3.05.17.apk
Follow the install and use instructions here: http://blog.hash-of-...w-to-safestrap/
Onlly install in RomSlot-1 in SafeStrap3
Click to expand...
Click to collapse
Developer Edition:
CWM Recovery: http://goo.im/devs/H...ry-vanquish.img
TWRP Recovery: http://goo.im/devs/H...ry-vanquish.img
Click to expand...
Click to collapse
Working features:
Data: Comes up in 4G
SMS/MMS: You may get random texts from VZWNMN Google for instructions to disable this
WIFI: Working in SafeStrap now as well thanks to some init*rc magic
Bluetooth: Turns on..status untested
12-5 Fix SafeStrap boot
Click to expand...
Click to collapse
What doesn't work (that I know of):
Audio in-call, NFC, Camera, Wifi Hotspot
Click to expand...
Click to collapse
Download link: http://goo.im/devs/Hashcode/vanquish/cm-10.1-20121210-UNOFFICIAL-vanquish-preview.zip
GAPPS: http://goo.im/gapps
All source modifications can be found at: http://github.com/STS-Dev-Team
As always enjoy and have fun!
dhacker29 said:
CM10.1 UNOFFICIAL (PREVIEW) for Droid Razr HD (XT926) - Consumer and Developer Edition
Well I have been working for a while and decided to release a preview build MEANING IT'S JUST A GLIMPSE OF THINGS TO COME NOT A DAILY DRIVER ....So here it is CM10.1 (4.2.1) for the Droid Razr HD. This will work on both the retail consumer edition with SafeStrap3 and on the developer edition with CWM or TWRP recovery.
OK first things first:
Download link: http://goo.im/devs/Hashcode/vanquish/cm-10.1-20121210-UNOFFICIAL-vanquish-preview.zip
GAPPS: http://goo.im/gapps
All source modifications can be found at: http://github.com/STS-Dev-Team
As always enjoy and have fun!
Click to expand...
Click to collapse
This really is an awesome accomplishment. I ran it for awhile but had to switch back. Even so it was smooth as silk. If I had known in call volume was a maybe I would have tested before flashing back. Sorry dh.
Sent from my DROID RAZR HD using Tapatalk 2
donated, thank you so much! will definitely donate again as more progress is made.
Would love to see this on the XT925, I know it's too much to ask lol.
Good job!
Sent from my XT925
so glad to see wifi is working i just flashed this cant wait to see this a daily driver
Royalfox said:
Would love to see this on the XT925, I know it's too much to ask lol.
Good job!
Sent from my XT925
Click to expand...
Click to collapse
I would image it could work on XT925...since his CM10 XT926 boots on even MB886.
Sent from my MB886 using Tapatalk 2
How long before a daily driver edition is out? I'm new to CM so sorry if this is a question I shouldn't be asking
thibaulb said:
How long before a daily driver edition is out? I'm new to CM so sorry if this is a question I shouldn't be asking
Click to expand...
Click to collapse
Yeah, it's a question you shouldn't be asking
Dhacker29 and anyone else here don't have a crystal ball to tell when its going to meet everyone's personal "daily driver" standards. Working Data and Wifi means daily driver to someone that does not make phone calls, so it can already be a daily driver for them, assuming they never have to call 911 lol
mattlgroff said:
Yeah, it's a question you shouldn't be asking
Dhacker29 and anyone else here don't have a crystal ball to tell when its going to meet everyone's personal "daily driver" standards. Working Data and Wifi means daily driver to someone that does not make phone calls, so it can already be a daily driver for them, assuming they never have to call 911 lol
Click to expand...
Click to collapse
Ok sweet. sorry if I offended anyone or anything by asking that
mattlgroff said:
Yeah, it's a question you shouldn't be asking
Dhacker29 and anyone else here don't have a crystal ball to tell when its going to meet everyone's personal "daily driver" standards. Working Data and Wifi means daily driver to someone that does not make phone calls, so it can already be a daily driver for them, assuming they never have to call 911 lol
Click to expand...
Click to collapse
+1
Awesomeness
swboland said:
+1
Click to expand...
Click to collapse
Everything works great, only issue is play store always force closes, but fast as hell cant wait to see the progress
Noob here again
Is there a step by step instructions list for installing this? Also, what is Safestrap?
thibaulb said:
Noob here again
Is there a step by step instructions list for installing this? Also, what is Safestrap?
Click to expand...
Click to collapse
No one is going to help you out much because you didn't even read the first post. There are step by step instructions including the definition and what safe strap is and does. Oh. Welcome to the community.
P.s. their are threads on new users of this type of way of installation. Hope its not coming off harsh.
Sent from my DROID RAZR HD using Tapatalk 2
manuski said:
No one is going to help you out much because you didn't even read the first post. There are step by step instructions including the definition and what safe strap is and does. Oh. Welcome to the community.
P.s. their are threads on new users of this type of way of installation. Hope its not coming off harsh.
Sent from my DROID RAZR HD using Tapatalk 2
Click to expand...
Click to collapse
Sorry for my lazyness. I couldn't view the link about safestrap because I'm at work and the site is blocked. I probably should have mentioned that in my post. I'll just check it when I get home. As far as step by step instructions, I was referring to the whole installation of CM10, rather than just the installation of safestrap
You said "Their are threads on new users of this type of way of installation". I've read over that a few times and don't quite understand what you mean. I haven't dug super super deep into these forums but I didn't see any threads about how to install CM10.
Thanks for the help
What if I:
Nandroid backup via safestrap
Install this on my xt925 to test
Is there a possibility to perma-brick or have a screwed up radio that I wouldn't be able to fix? I want to flash and play with it, but only if I can get back with a nandroid.
Actually can't I flash anything I want on a rom slot with safestrap? Can't I just go back to the stock slot at anytime?
---------- Post added at 07:09 PM ---------- Previous post was at 06:18 PM ----------
Got impatient and tried it on slot 1. Nothing worked as expected, it booted but no radios or anything would respond. I just deleted rom slot 1 and I'm back to stock.
I guess my question is, how much do I have to donate to get a working version of this for the xt925?
seh6183 said:
What if I:
Nandroid backup via safestrap
Install this on my xt925 to test
Is there a possibility to perma-brick or have a screwed up radio that I wouldn't be able to fix? I want to flash and play with it, but only if I can get back with a nandroid.
Actually can't I flash anything I want on a rom slot with safestrap? Can't I just go back to the stock slot at anytime?
---------- Post added at 07:09 PM ---------- Previous post was at 06:18 PM ----------
Got impatient and tried it on slot 1. Nothing worked as expected, it booted but no radios or anything would respond. I just deleted rom slot 1 and I'm back to stock.
I guess my question is, how much do I have to donate to get a working version of this for the xt925?
Click to expand...
Click to collapse
do·na·tion
/dōˈnāSHən/
Noun
Something that is given to a charity, esp. a sum of money.
The action of donating something.
Synonyms
gift - offering - grant - present - donative - endowment
Click to expand...
Click to collapse
Maybe you don't understand what a donation is
Epinter has an XT925 CM10 in this board, check that out.
Dhacker are you the only developer with a droid RAZR HD?
Sent from my DROID RAZR HD using Tapatalk 2
mattlgroff said:
Maybe you don't understand what a donation is
Epinter has an XT925 CM10 in this board, check that out.
Click to expand...
Click to collapse
I don't want to void my warranty just to install cm10. I'm hoping for a safestrap version.
seh6183 said:
I don't want to void my warranty just to install cm10. I'm hoping for a safestrap version.
Click to expand...
Click to collapse
Ah because of the need for an unlocked bootloader?
Sent from my DROID RAZR HD using Tapatalk 2
How's the battery life on this comparatively? Any rough feelings on % improvement?
The first (very mildly) customized ROM for NVIDIA SHIELD... Tweaker.
For those who tried SHIELD on launch day (or early on before the OTA was applied), it had a dashboard with bigger graphics that were easier to read. Now, it's just icons. I don't like the icons. So a little bit of hacking together pieces (and adding SuperUser while I was at it) resulted in TweakerRom.
Don't expect much difference, at least not until I get CM-10.2 done for SHIELD. But this has a nicer interface, in my opinion, and is based on the latest OTA 1.1 release (with the SHIELD UI from the original image)
You need to install a SuperUser app (I highly recommend SuperSU) but you don't need to use recovery to do it.
Download:
http://goo.im/devs/agrabren/shield/tweaker/ShieldTweaker-1.1.zip
Reserved for changelog and stuff
Reserved for Video! It WILL come.
This is great! Will flash this tonight once I can get CWRM to flash properly in fastboot...
Awesome! I'm glad to see the first step being made, but I'm going to hold out until 10.2. I'm getting lazy in my old-ish age.:silly:
Sorry BUT:
I hate to be "that guy" but could you put up a mirror or can I? These are my speeds:
and... I am getting a 850kb per second download speed.
---------- Post added at 02:13 PM ---------- Previous post was at 01:41 PM ----------
I just finished Unlocking and Flashing your recovery when the download finished (YES I unlocked it just for this ROM). I have to say: I LOVE the interface, I never got to see it but it is SO much better! Thanks for pioneering the development over here, there isn't much at all... I plan to do some theming stuff once I get around to it XD
Kwongger said:
I hate to be "that guy" but could you put up a mirror or can I?
Click to expand...
Click to collapse
Go ahead and mirror.
Glad you like that interface.
agrabren said:
Go ahead and mirror.
Glad you like that interface.
Click to expand...
Click to collapse
I will mirror tomorrow at school when I have a decent upload speed (0.3mbs up at the house).
Mirror is UP!
I have uploaded the mirror to Android File Host! Here it is:
MIRROR
Hi, how things going with CM-10.2 for SHIELD? If you need extra device for tests just let me know.
New OTA update out today. Android 4.3. Will there be any issues if I update through this rom?
themichael said:
New OTA update out today. Android 4.3. Will there be any issues if I update through this rom?
Click to expand...
Click to collapse
On most devices you have to be stock in order to update.
nrage23 said:
On most devices you have to be stock in order to update.
Click to expand...
Click to collapse
Yes, but this ROM is bascically the stock ota wit one app changed. The updater apk is still intact.
themichael said:
Yes, but this ROM is bascically the stock ota wit one app changed. The updater apk is still intact.
Click to expand...
Click to collapse
If you do not have the stock recovery then you cannot install the factory update. If you installed this rom you don't have the stock recovery.
Sent from my SM-P600 using XDA Premium HD app
nrage23 said:
If you do not have the stock recovery then you cannot install the factory update. If you installed this rom you don't have the stock recovery.
Sent from my SM-P600 using XDA Premium HD app
Click to expand...
Click to collapse
Stock recovery is very easy to flash...you are not answering my question but rather proposing roadblocks.
themichael said:
Stock recovery is very easy to flash...you are not answering my question but rather proposing roadblocks.
Click to expand...
Click to collapse
All you asked was if you could get the update while having this rom. I did answer the question. Was not trying to be difficult. Next time I guess I will just say no and you figure can the rest out.
Sent from my SM-P600 using XDA Premium HD app
nrage23 said:
All you asked was if you could get the update while having this rom. I did answer the question. Was not trying to be difficult. Next time I guess I will just say no and you figure can the rest out.
Sent from my SM-P600 using XDA Premium HD app
Click to expand...
Click to collapse
Turns out you're wrong, you can. Thanks for nothing.
themichael said:
Turns out you're wrong, you can. Thanks for nothing.
Click to expand...
Click to collapse
The SHIELD is a bit of an unusual exception here - most of their OTAs seem to be full system images, instead of delta patches.
While this makes the OTAs much larger, it also makes them much more robust.
agrabren said:
The first (very mildly) customized ROM for NVIDIA SHIELD... Tweaker.
For those who tried SHIELD on launch day (or early on before the OTA was applied), it had a dashboard with bigger graphics that were easier to read. Now, it's just icons. I don't like the icons. So a little bit of hacking together pieces (and adding SuperUser while I was at it) resulted in TweakerRom.
Don't expect much difference, at least not until I get CM-10.2 done for SHIELD. But this has a nicer interface, in my opinion, and is based on the latest OTA 1.1 release (with the SHIELD UI from the original image)
You need to install a SuperUser app (I highly recommend SuperSU) but you don't need to use recovery to do it.
Download:
http://goo.im/devs/agrabren/shield/tweaker/ShieldTweaker-1.1.zip
Click to expand...
Click to collapse
Thank you flashed this and streaming is working perfectly again the image is sharp and no artifacts I don't need console mode
Hey everyone, me again! So with Android 4.4 out for the Nexus 4, I thought some folks might need a little help installing it, or maybe just need a visual aid to help. So I made a How To video. Hopefully it helps some people :fingers-crossed: If it does, maybe hit that "Thanks" button?
Thanks dude just what I was looking for!
Sent from my Nexus 4 using Tapatalk
Does this break anything? I am really tempted to do it!
Sent from my Nexus 7 using xda app-developers app
TheSmokingAndroid said:
Hey everyone, me again! So with Android 4.4 out for the Nexus 4, I thought some folks might need a little help installing it, or maybe just need a visual aid to help. So I made a How To video. Hopefully it helps some people :fingers-crossed: If it does, maybe hit that "Thanks" button?
Click to expand...
Click to collapse
Thanks, just what I was looking for. If I cant find a toolkit to do it with then I have no doubt with your video I can get it done. I don't want to wait! Welll done.
TheSmokingAndroid said:
Hey everyone, me again! So with Android 4.4 out for the Nexus 4, I thought some folks might need a little help installing it, or maybe just need a visual aid to help. So I made a How To video. Hopefully it helps some people :fingers-crossed: If it does, maybe hit that "Thanks" button?
Click to expand...
Click to collapse
I am getting a status 7 error. Any idea how i can fix that?
Seems to break root. I can't get back to cwm.
Sent from my AOSP on Mako using XDA Premium 4 mobile app
justibasa said:
Seems to break root. I can't get back to cwm.
Sent from my AOSP on Mako using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have an easy root fix for once you update to 4.4 if you have Mac
I modified the Root.Nexus.4.zip file for Mac on here, updated it to CWM 6.0.4.3 image, and SuperSU 1.65 image. Just unzip, and run the Root.Nexus.4 terminal shell script with the N4 in fastboot with USB connected to the Mac, I think you can use a similar script for PC and prob need USB drivers if you don't have them already. Hope this helps
I'm unable to post a link on here since I'm a newb, PM if you want the link to the zip
Thanks
Another build available here : http://www.androidauthority.com/android-4-4-kitkat-nexus-4-nexus-7-download-unofficially-313352/.
Flashed this in CWM, everything, including root is absolutely fine. (I flashed SuperSu 1.65 zip). But for the proper google experience, have to wait for the factory images.
The lockscreen widgets functionality (except for the camera widget) seems to have been removed, can anyone find that option anywhere?
Edit: Lockscreen widgets can be enabled in Settings->Security.
aravindsagar said:
Another build available here : http://www.androidauthority.com/android-4-4-kitkat-nexus-4-nexus-7-download-unofficially-313352/.
Flashed this in CWM, everything, including root is absolutely fine. (I flashed SuperSu 1.65 zip). But for the proper google experience, have to wait for the factory images.
The lockscreen widgets functionality (except for the camera widget) seems to have been removed, can anyone find that option anywhere?
Edit: Lockscreen widgets can be enabled in Settings->Security.
Click to expand...
Click to collapse
that is PA AOSP which was built and posted hours ago, also has a thread in orig android dev.
as for lockscreen widgets. they're working fine. look into settings-lockscreen
gonemad02 said:
that is PA AOSP which was built and posted hours ago, also has a thread in orig android dev.
as for lockscreen widgets. they're working fine. look into settings-lockscreen
Click to expand...
Click to collapse
Yeah, just thought I would share this link as well, since for some people, it seemed to break root, but this build worked fine for me, including root.
aravindsagar said:
Yeah, just thought I would share this link as well, since for some people, it seemed to break root, but this build worked fine for me, including root.
Click to expand...
Click to collapse
sorry it's on Settings > Security > then turn it on from there bro! oh alright. enjoy kitktat, have a break!
Do you have some manual to downgrade to 4.3? Because when i do it i lose signal and wifi..
Sent from my Nexus 4 using xda app-developers app
I might wait
Well i was going to try but guess i hold off for official release.Thank you for the videos nice work.
Hey all,
Found this on dhacker29's Twitter, been using it for a couple of days. It's pretty much the same AOSP 4.4 that we already have from EvanA and koko98, with one big difference. Autorotate and Camera are both working!
I figured I'd share and also hope that this can be used by other devs to get it working in their builds. I've also included a link to dhacker's gapps package, I've used both his and the PA gapps without issue.;
AOSP 4.4 rom: http://t.co/9mSQtIRoO7
Gapps: http://t.co/o4wzxsfkig
Just to be clear, this is not my work. I am just spreading the news. All credit for this excellent build goes to XDA member dhacker29. For those of us that are using his rom, it would be a good idea to thank dhacker29 for his work.
Just find one of his posts/threads on XDA and click a thanks for him. This is a pretty cool and very functional rom to have so early in 4.4 development.
EDIT: koko98 has built a CM11 that also has working rotation and camera. Here's his link in the dev section: http://forum.xda-developers.com/showthread.php?t=2509905
Mike T
webdroidmt said:
Hey all,
Found this on dhacker29's Twitter, been using it for a couple of days. It's pretty much the same AOSP 4.4 that we already have from EvanA and koko98, with one big difference. Autorotate and Camera are both working!
I figured I'd share and also hope that this can be used by other devs to get it working in their builds. I've also included a link to dhacker's gapps package, I've used both his and the PA gapps without issue.;
AOSP 4.4 rom: http://t.co/9mSQtIRoO7
Gapps: http://t.co/o4wzxsfkig
Mike T
Click to expand...
Click to collapse
Good thanks i try it
Been using it for a few days now. Only bug I've found is that location services don't work.
Might want to note that my device was charging extremely slowly after flashing this (might just be me)
Sent from my XT907 using xda premium
awesome, just flashed and yeah rotation is working, needed this, lol.
EDIT: had to find a SU zip, something about this broke that.
Leraeniesh said:
Been using it for a few days now. Only bug I've found is that location services don't work.
Might want to note that my device was charging extremely slowly after flashing this (might just be me)
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
Yeah, location services not working. No problem with charging, my device charges very quickly as usual.
Mike T
Simply the best 4.4 rom available, great work!!
It's very good, except I don't know how to root it. I didn't flash gapps and now I have no custom recovery, nor root, and my computer won't detect is ADB device. Any help?
tomh1979 said:
awesome, just flashed and yeah rotation is working, needed this, lol.
EDIT: had to find a SU zip, something about this broke that.
Click to expand...
Click to collapse
Did it break rotation?
JavaJunkay said:
It's very good, except I don't know how to root it. I didn't flash gapps and now I have no custom recovery, nor root, and my computer won't detect is ADB device. Any help?
Click to expand...
Click to collapse
Flash superSu
mulletcutter said:
Did it break rotation?
Flash superSu
Click to expand...
Click to collapse
Nope rotation still works.
Sent from my AOSP on Grouper using Tapatalk 4
nvm
mulletcutter said:
Did it break rotation?
Flash superSu
Click to expand...
Click to collapse
How? I have no TWRP, and I can't get TWRP because all of a sudden my PC no longer sees Nexus 7 at all, no MTP, so I can't access that and even when I properly reinstall all the drivers and enable USB debugging, it doesn't detect any ADB devices. It just gives me Windows beep beep sounds when plugging it in, but that's it, other than that it's useless. I should note that this started happening just after I installed Kit Kat (100% pure install), and I should add that I'm running Windows 8.1
Other than this, the ROM is very good! Well done developer.
If this is such a great ROM shouldn't it be posted in "Original Development?"
I was on 4.4 but downgraded because I wanted Screen Control and the Camera back.
JavaJunkay said:
How? I have no TWRP, and I can't get TWRP because all of a sudden my PC no longer sees Nexus 7 at all, no MTP, so I can't access that and even when I properly reinstall all the drivers and enable USB debugging, it doesn't detect any ADB devices. It just gives me Windows beep beep sounds when plugging it in, but that's it, other than that it's useless. I should note that this started happening just after I installed Kit Kat (100% pure install), and I should add that I'm running Windows 8.1
Other than this, the ROM is very good! Well done developer.
Click to expand...
Click to collapse
what recovery were you using to flash this? the ROM flash shouldn't change your recovery.
JavaJunkay said:
How? I have no TWRP, and I can't get TWRP because all of a sudden my PC no longer sees Nexus 7 at all, no MTP, so I can't access that and even when I properly reinstall all the drivers and enable USB debugging, it doesn't detect any ADB devices. It just gives me Windows beep beep sounds when plugging it in, but that's it, other than that it's useless. I should note that this started happening just after I installed Kit Kat (100% pure install), and I should add that I'm running Windows 8.1
Other than this, the ROM is very good! Well done developer.
Click to expand...
Click to collapse
Install recovery tool from the play store, use that to flash the latest twrp, it's a pretty useful app.
Once you have twrp use this zip for super user.
http://download.chainfire.eu/351/SuperSU/UPDATE-SuperSU-v1.65.zip
Sent from my AOSP on Grouper using Tapatalk 4
Trickster mod is working, installed busybox. It's got it's moments of lag but I'm going rock it and are how it does.
Do the older Camera launching apps in the store still work?
Sent from my Nexus 10 using Tapatalk 4
drewski_1 said:
Do the older Camera launching apps in the store still work?
Sent from my Nexus 10 using Tapatalk 4
Click to expand...
Click to collapse
Please do try and let us know....either or, I'll be reporting back soon enough anyway
Sent from my AOSP on Grouper using Tapatalk
drewski_1 said:
Do the older Camera launching apps in the store still work?
Sent from my Nexus 10 using Tapatalk 4
Click to expand...
Click to collapse
I'm using the official N7 camera launcher from Play Store and it works great. I've also tried 2 other N7 launchers from Play Store and they worked as well.
Mike T
ev1lchris said:
If this is such a great ROM shouldn't it be posted in "Original Development?"
I was on 4.4 but downgraded because I wanted Screen Control and the Camera back.
Click to expand...
Click to collapse
It's not posted in development because the dev, dhacker29 has not opted to post it himself. It's up to the dev or a designated maintainer of a rom whether or not to post it in development and provide support for it.
I found this rom and decided to post it as a way of sharing dhacker's work with the community. Besides, what does it matter where it's posted, if it works for you and you like it, use it. If it doesn't, just don't use it.
Mike T
thanks a lot! Best rom available
This thread is for discussion of the nightlies only from http://download.cyanogenmod.org
Where to get info:
A good place to discuss in real-time is IRC at channel #lg-gpad on freenode
You can follow me on:
Google+: https://plus.google.com/114860410994043943287
Twitter: @dalingrin
Google+ is preferred but I will cross post to twitter as well.
Known issues:
-While LG's knock on feature works, knock off does not work yet.(A simple work around is go to the settings and add a "go to sleep" quick settings tile)
-Currently only for v500. GPE v510 support coming soon.
Installation:
Instructions will be up soon at http://wiki.cyanogenmod.org
Must have latest recoveries installed. If you installed your recovery prior to December 6th 2013 then you need to update it.
If flashing from a LG based rom then you must wipe the /data
Google Apps: http://wiki.cyanogenmod.org/w/Gapps
Download:
http://download.cyanogenmod.org
Let'go with the ROMs yeeees
Inviato dal mio Galaxy Nexus utilizzando Tapatalk
Yes yes yes!
Sent from my GT-N7105 using XDA Premium 4 mobile app
---------- Post added at 06:33 PM ---------- Previous post was at 06:28 PM ----------
Is there gonna be an official CWM recovery or support from Rom Manager? Since this is official and Koush is part of the team... Just asking?
Sent from my GT-N7105 using XDA Premium 4 mobile app
My CWM build should work as it was updated with the same kernel that TWRP was updated from. I'll test it myself when the nightly is available and let you know.
I don't see the ROM for the LG G Pad.
mustbepbs said:
My CWM build should work as it was updated with the same kernel that TWRP was updated from. I'll test it myself when the nightly is available and let you know.
Click to expand...
Click to collapse
Thanks. I'll update the OP
Tqpolo said:
I don't see the ROM for the LG G Pad.
Click to expand...
Click to collapse
Check the bold text just under the download link =)
Nightlies are built in alphabetical order and our modem is v500 so it'll be an hour or two.
lovely!!! now as soon as someone build TWRP for the GPE I can flash this!!
at last, official cyanogen release! thnx so much mate, keep up the good work
Is the only known issue right now the lack of Knock Off? Otherwise, is it pretty much rock solid, or is it still a work-in-progress?
SCWells72 said:
Is the only known issue right now the lack of Knock Off? Otherwise, is it pretty much rock solid, or is it still a work-in-progress?
Click to expand...
Click to collapse
I've not found any device specific issues.
dalingrin said:
I've not found any device specific issues.
Click to expand...
Click to collapse
Fantastic, great news. Nice to hear there are no camera, wifi, or other issues!
Now I'd be curious to hear user feedback once it is live. I'll probably flash it this weekend.
I hope we do not see a huge decrease in battery. Good to see roms coming!
The Moto X bionic libs should work for this, right? It's a Qualcomm chip and Android 4.4. I'm using them on my DROID DNA and they make things much snappier.
We're on the P's now..so excited. Can't freakin' wait.
mustbepbs said:
We're on the P's now..so excited. Can't freakin' wait.
Click to expand...
Click to collapse
Judging from the queue and speed of releases I think it will be a few good hours until there is a release for the v500.
Sent from my LG-V500 using Tapatalk 4
Not sure but I have to ask. Will you be posting some Screenshots ?
I'm assuming that the gapps listed here at the top (20131208 [Not ART Compatible] ) are the ones to flash along with the upcoming build?
http://wiki.cyanogenmod.org/w/Gapps
mustbepbs said:
The Moto X bionic libs should work for this, right? It's a Qualcomm chip and Android 4.4. I'm using them on my DROID DNA and they make things much snappier.
Click to expand...
Click to collapse
Good chance they'll work but I haven't tried.
naruto.ninjakid said:
Not sure but I have to ask. Will you be posting some Screenshots ?
Click to expand...
Click to collapse
No, Its CyanogenMod so it looks primarily like a Nexus device
muffnman said:
I'm assuming that the gapps listed here at the top (20131208 [Not ART Compatible] ) are the ones to flash along with the upcoming build?
http://wiki.cyanogenmod.org/w/Gapps
Click to expand...
Click to collapse
Yes my understanding is that works the best right now. Hopefully better, more ART compatible, gapps will come soon.
PA Gapps are compatible with ART but they have several other issues.
I'm assuming this will not work on the Google Play Edition version because of Loki, and if i'm correct do you know how hard it'd be to make it work with the GPE? Just kernel I'm assuming? Thanks for your work!
kenhunt said:
I'm assuming this will not work on the Google Play Edition version because of Loki, and if i'm correct do you know how hard it'd be to make it work with the GPE? Just kernel I'm assuming? Thanks for your work!
Click to expand...
Click to collapse
Just the kernel will need to change. It will take a couple of days but we will have unified builds for both GPE V510 and V500 so it will be seamless.
It's up! Downloading now. I'll let you know what happens with CWM as well.
EDIT: Flashed just fine with my CWM build. Booting up now!
EDIT2: Things are going well. First thing I noticed is that auto rotate isn't working for me. Is it working for you, @dalingrin?