I have tried this:
Guru Reset M7 2.24.161.1
File Size: 1.1 GiB - Downloads: 3142
MD5: 81bda125ec09b57255024526b1952ca5
Comments: Stock Vodafone UK ROM 2.24.161.1 with graphical aroma installer. Includes the ability to flash the Stock Recovery and also Stock Radio.
OTA Updates, when available.
modelid: PN0710000
cidnum: VODAP001
cidnum: VODAP102
cidnum: VODAPE17
cidnum: VODAP405
cidnum: VODAP304
cidnum: VODAPD18
cidnum: VODAP120
cidnum: VODAP110
but when is comes to the official over the air update the device gets stuck in a boot loop and wont allow me to boot into recovery ?
here is my fastboot info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.161.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP001
THUDUK said:
I have tried this:
Guru Reset M7 2.24.161.1
File Size: 1.1 GiB - Downloads: 3142
MD5: 81bda125ec09b57255024526b1952ca5
Comments: Stock Vodafone UK ROM 2.24.161.1 with graphical aroma installer. Includes the ability to flash the Stock Recovery and also Stock Radio.
OTA Updates, when available.
modelid: PN0710000
cidnum: VODAP001
cidnum: VODAP102
cidnum: VODAPE17
cidnum: VODAP405
cidnum: VODAP304
cidnum: VODAPD18
cidnum: VODAP120
cidnum: VODAP110
but when is comes to the official over the air update the device gets stuck in a boot loop and wont allow me to boot into recovery ?
here is my fastboot info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.161.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4306mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
There is a mismatch between the reset rom version you are you using and the firmware version installed on your phone (6.12.161.8 vs 2.24.161.1). Firmware and software version must match in oder to take ota updates. You will need to find a nandroid backup that match your version or something else that match (reset rom, RUU) or use custom roms.
And btw, remove your IMEI and serialno
Thanks for your reply, but I'm still unsure how to get back to stock
Sent from my HTC One using XDA Free mobile app
THUDUK said:
Thanks for your reply, but I'm still unsure how to get back to stock
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
well your firmware version cant be downgraded unless you s-off the phone so you might want to check for a nandroid backup that match your version . Restore that backup and stock recovery and you'll be stock.
Are you going back to stock for warranty purpose?
If not just s-off the phone, change CID/MID and use another version RUU (there is no RUU for VODAP001)
Would anyone have our know where I can get a nandroid backup, for my version please?
Related
C:\miniadb_m7>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH35SW904667
(bootloader) imei: 3xxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3808mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
bootloader unlocked how to fix this?
falak said:
C:\miniadb_m7>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
finished. total time: 0.047s
bootloader unlocked how to fix this?
Click to expand...
Click to collapse
1- edit your post and remove IMEI
2- explain in more details what went wrong, there is an RUU for you, but before rushing to RUU, you should explain the problem... what did you flash, what happened, when did it happen, and any info that you would consider important
nkk71 said:
1- edit your post and remove IMEI
2- explain in more details what went wrong, there is an RUU for you, but before rushing to RUU, you should explain the problem... what did you flash, what happened, when did it happen, and any info that you would consider important
Click to expand...
Click to collapse
there was update notification i just updated and phone restart and hang on htc logo
now its can go itno bootloader but not going to main os windows
tried to use this ruu RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1.exe
but its not working with my device
regards
nkk71 said:
1- edit your post and remove IMEI
2- explain in more details what went wrong, there is an RUU for you, but before rushing to RUU, you should explain the problem... what did you flash, what happened, when did it happen, and any info that you would consider important
Click to expand...
Click to collapse
@guys
srry to hijack this thread but i too have a similar problem with the htc one i received! it was in the htc one logo hanging position! and so i tried updating it to the GE edition, but it still is in the same thing problem! only stays in htc logo! pls find below my logs 1 is before i flashed any rom and 2 is after i updated to GE edition!
1. before doing anyhting
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH37XW901648
(bootloader) imei: 3578640
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 3817mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
2. after updating to GE editinon
E:\One_All-In-One_Kit_v3.1\One_All-In-One_Kit_v\data>
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH37XW901648
(bootloader) imei: 3578640
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4005mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.050s
pls help me in rectifying the problem!
WBR
ReyTech.
@ReyTech, start your own thread.
@falak, what do you mean the RUU didn't work? How did it fail?
falak said:
there was update notification i just updated and phone restart and hang on htc logo
now its can go itno bootloader but not going to main os windows
tried to use this ruu RUU_M7_UL_K44_SENSE55_MR_HTC_Europe_4.19.401.9_R_Radio_4A.23.3263.28_10.38r.1157.04L_release_353069_signed_2-1.exe
but its not working with my device
regards
Click to expand...
Click to collapse
BenPope said:
@ReyTech, start your own thread.
@falak, what do you mean the RUU didn't work? How did it fail?
Click to expand...
Click to collapse
As BenPope mentioned please elaborate what it's doing, because I can confirm the 4.19.401.9 works (with LOCKED bootloader and S-ON): http://forum.xda-developers.com/showpost.php?p=52127142&postcount=30
BenPope said:
@ReyTech, start your own thread.
@falak, what do you mean the RUU didn't work? How did it fail?
Click to expand...
Click to collapse
it says uncompatable rom for your device and failed
falak said:
it says uncompatable rom for your device and failed
Click to expand...
Click to collapse
That's strange:
Code:
[B][COLOR="Blue"]modelid: PN0710000[/COLOR][/B]
cidnum: HTC__001
[B][COLOR="Blue"]cidnum: HTC__J15[/COLOR][/B]
cidnum: HTC__E11
cidnum: HTC__203
cidnum: HTC__102
cidnum: HTC__405
cidnum: HTC__Y13
cidnum: HTC__A07
cidnum: HTC__304
cidnum: HTC__032
cidnum: HTC__016
mainver: 4.19.401.9
btype:1
aareport:1
DelCache:1
hbootpreupdate:3
can you post screenshots of the RUU.EXE as you run it...
nkk71 said:
That's strange:
Code:
[B][COLOR="Blue"]modelid: PN0710000[/COLOR][/B]
cidnum: HTC__001
[B][COLOR="Blue"]cidnum: HTC__J15[/COLOR][/B]
cidnum: HTC__E11
cidnum: HTC__203
cidnum: HTC__102
cidnum: HTC__405
cidnum: HTC__Y13
cidnum: HTC__A07
cidnum: HTC__304
cidnum: HTC__032
cidnum: HTC__016
mainver: 4.19.401.9
btype:1
aareport:1
DelCache:1
hbootpreupdate:3
Click to expand...
Click to collapse
unlock bootloader is effecting that or is that ok to run ruu with unlocked bootloader??
can you post screenshots of the RUU.EXE as you run it..
falak said:
unlock bootloader is effecting that or is that ok to run ruu with unlocked bootloader??
Click to expand...
Click to collapse
bootloader definitely has to be LOCKED or RELOCKED with S-On!! check "Not so FAQ #2" : http://forum.xda-developers.com/showthread.php?p=52135024&postcount=2
falak said:
unlock bootloader is effecting that or is that ok to run ruu with unlocked bootloader??
can you post screenshots of the RUU.EXE as you run it..
Click to expand...
Click to collapse
here is screen shots
nkk71 said:
bootloader definitely has to be LOCKED or RELOCKED with S-On!! check "Not so FAQ #2" : http://forum.xda-developers.com/showthread.php?p=52135024&postcount=2
Click to expand...
Click to collapse
is there any way to relock bootloader in fastboot?
all done thanks for your help guys
cheers you may delete this thread
falak said:
all done thanks for your help guys
cheers you may delete this thread
Click to expand...
Click to collapse
thread deleted :silly:
why?
nkk71 said:
thread deleted :silly:
why?
Click to expand...
Click to collapse
lols to save forum space anyhow realy thanks for your help
ive unlocked bootloader and philz touch recovery installed
tried to costum rom my htc one and for no reason idk how i formated internal momory and lost rom.zim
for a week now im trying everything
tried sideload , adb push method none of them did work
i got OTG usb cable and i managed to flash somehow a rom . everything goes fine no error during isntalation but device wont start to OS
otg method for my only works on philz touch ?? in other recovery when aroma installer statrs "touch screen" stops responding ...
any help is appreciated
im s-on also my cid is ;; VODAP110
if someone can post a link of RUU that is compatibility of my cid so i can back to stock
You know the first step of troubleshooting?
OUTLINE ALL OF YOUR STEPS WITH DETAILS. Including output of fastboot getvar all (minus IMEI)
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT36GW9A0467
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP110
(bootloader) battery-status: good
(bootloader) battery-voltage: 4015mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ea0bccbd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
lummujaj said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT36GW9A0467
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: VODAP110
(bootloader) battery-status: good
(bootloader) battery-voltage: 4015mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-ea0bccbd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
OK. And the errors? Exactly? ROM names, Recovery version..come on you need help but not willing to help me help you..
Personally I would flash twrp 2.6.3.3 recovery and start again
Sent from my Nexus 7 using XDA Premium 4 mobile app
lummujaj said:
tried sideload , adb push method none of them did work
Click to expand...
Click to collapse
Why? What was the error?
lummujaj said:
i got OTG usb cable and i managed to flash somehow a rom . everything goes fine no error during isntalation but device wont start to OS
Click to expand...
Click to collapse
What rom and version # ?
im s-on also my cid is ;; VODAP110
if someone can post a link of RUU that is compatibility of my cid so i can back to stock
Click to expand...
Click to collapse
There is no RUU for vodap110
---------- Post added at 11:40 PM ---------- Previous post was at 11:39 PM ----------
nateboi81 said:
Personally I would flash twrp 2.6.3.3 recovery and start again
Click to expand...
Click to collapse
+1
and also check that you have latest ADB version if you want to use sideload (1.0.31)
and check your drivers are correctly installed
I have a Vodafone backup that you can use, however you will have to wait till I get back from work now before I can upload it.
Its android 4.4.2 with the related firmware 4.19.161.1
You will need to flash the recovery I supply and create a couple of TWRP folders on your internal storage for it to work where you will place the backup in order for TWRP to see it, you will need the serial number of your phone too as one of the folders is named your serial number.
Also included is the matching firmware for it, I will not be held responsible for bricks if a flash goes wrong etc though, you update this completely at your own risk.
I'll PM you the link later if you want it.
it supports the following models:
modelid: PN0710000
cidnum: VODAP001
cidnum: VODAP102
cidnum: VODAPE17
cidnum: VODAP405
cidnum: VODAP304
cidnum: VODAPD18
cidnum: VODAP120
cidnum: VODAP110
Hello,
I'd like to ask anyone here for a stock RUU for the CID: HTC__K18 modelid: PN0711000
Or maybe not rooted nandroid backup.
Thanks in advance.
saturn_frak said:
Hello,
I'd like to ask anyone here for a stock RUU for the CID: HTC__K18 modelid: PN0711000
Or maybe not rooted nandroid backup.
Thanks in advance.
Click to expand...
Click to collapse
It looks like you can use the X.XX.401.X RUU for you CID. You can find one here. Just make sure that you get the same or higher RUU for your ROM version.
majmoz said:
It looks like you can use the X.XX.401.X RUU for you CID. You can find one here. Just make sure that you get the same or higher RUU for your ROM version.
Click to expand...
Click to collapse
My info now:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA37FW900005
(bootloader) imei: 354435053251112
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4271mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
I'll try the 401 thanks
Please remove your serialno & imei from your post. The rest of the world don't need to know it.
Sent from my HTC One using XDA Premium 4 mobile app
First used:
http://shoot-a-droid.blogspot.co.il/2013/06/hboot-htc-one-s-off-modded-stock-eng.html
To flash 1.44 hboot
saturn_frak said:
First used:
http://shoot-a-droid.blogspot.co.il/2013/06/hboot-htc-one-s-off-modded-stock-eng.html
To flash 1.44 hboot
Click to expand...
Click to collapse
Before you flash a different hboot, take a look at Guru Stock Rom Resets first. There is one for your version number, I don't know what type of checking it does but you might have to change your MID first. You can use this [Tool] MID change without ENG HBOOT.
Hey guys,
I want to try to go stock with my HTC One (CID HTC__102).
I have a Problem. After I have installed the WWE Rom, I have a weird 4G icon for LTE connectivity. This is not the original LTE icon for my Region (Germany).
Is theyre a fix or nandroid backup for me?
Greetings
MobiusOne1991 said:
Hey guys,
I want to try to go stock with my HTC One (CID HTC__102).
I have a Problem. After I have installed the WWE Rom, I have a weird 4G icon for LTE connectivity. This is not the original LTE icon for my Region (Germany).
Is theyre a fix or nandroid backup for me?
Greetings
Click to expand...
Click to collapse
post the ouput of fastboot getvar all except imei and serialno
you can also edit your SKU ID to change your icon
alray said:
post the ouput of fastboot getvar all except imei and serialno
you can also edit your SKU ID to change your icon
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.11
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4315mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
How can I change my SKU ID? Do I have the possibility to get OTA updates?
Thanks
If you want full stock and get OTA updates, then download this and flash in TWRP recovery, select flash stock recovery in the installer but don't select flash radio, you will get an update as soon as you've set your device back up, ie region, gmail account, facebook etc.
(be warned, this might set you back to s-on)
http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/
Its for these models:
modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016
There is also a newer RUU here, but one a slightly different firmware 4.19.401.9
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
MobiusOne1991 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.11
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: XXXXXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4315mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
How can I change my SKU ID? Do I have the possibility to get OTA updates?
Thanks
Click to expand...
Click to collapse
well with s-off you could simply flash the latest version ruu for your version (.401) and start over with a fresh install of your OS or you can do what mentioned above.
skuid: http://trjlive.com/2013/11/guide-sku-id-htc-one/
note that modding this file will probably prevent you to install future ota unless you revert the changes before each ota.
Hey,
I have tried every link and zip and I still getting the 4G symbol.
The SKU in de zip files is 42, the correct one for my country.
Hi all, I have a problem and don't know how to fix it , I dissasembly my HTC One recently to replace the battery, but with bad luck that I damaged the motherboard. So I have to replace it. After reassembly my HTC, it stuck in bootloop splashscreen.
I installed a ruu succesfully but it stuck in bootloop.
Thanks and sorry for my bad english.
Anyelse??????
adri_360 said:
Hi all, I have a problem and don't know how to fix it , I dissasembly my HTC One recently to replace the battery, but with bad luck that I damaged the motherboard. So I have to replace it. After reassembly my HTC, it stuck in bootloop splashscreen.
I installed a ruu succesfully but it stuck in bootloop.
Click to expand...
Click to collapse
If you disassembled your phone and broke something then we can't really help. You've said that you were able to flash a RUU but the phone still doesn't work so its most likely an hardware problem otherwise flashing a RUU would have solved any firmware/software issue.
but there is no way to find out which is why that does not happen there, what part is the problem?
adri_360 said:
but there is no way to find out which is why that does not happen there, what part is the problem?
Click to expand...
Click to collapse
Can you post more info about your phone? The output of "fastboot getvar all" and what ruu you did flashed?
alray said:
Can you post more info about your phone? The output of "fastboot getvar all" and what ruu you did flashed?
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 3858mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
And the ruu I flashed is:
7.19.401.2
HTC_Europe
MID: PN0710000
CID: HTC__001
CID: HTC__J15
CID: HTC__E11
CID: HTC__203
CID: HTC__102
CID: HTC__405
CID: HTC__Y13
CID: HTC__A07
CID: HTC__304
CID: HTC__032
CID: HTC__016
PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.2_Radio_4T.35.3218.16_10.33Q.1718.01L_release_421790_signed.zip
https://www.androidfilehost.com/?fid=95916177934554130
adri_360 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 3858mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
And the ruu I flashed is:
7.19.401.2
HTC_Europe
MID: PN0710000
CID: HTC__001
CID: HTC__J15
CID: HTC__E11
CID: HTC__203
CID: HTC__102
CID: HTC__405
CID: HTC__Y13
CID: HTC__A07
CID: HTC__304
CID: HTC__032
CID: HTC__016
PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.2_Radio_4T.35.3218.16_10.33Q.1718.01L_release_421790_signed.zip
https://www.androidfilehost.com/?fid=95916177934554130
Click to expand...
Click to collapse
Yep thats the right file for your phone so this is probably an hardware problem. Maybe you should disassemble it and check everything again
alray said:
Yep thats the right file for your phone so this is probably an hardware problem. Maybe you should disassemble it and check everything again
Click to expand...
Click to collapse
Probably be the dumbest person in the universe right now. The problem was back cover that it had nfc chip, and I didn't assembled.
Now start perfectly, but it doesn't detect two cameras, and this part I didn't disassembly.
SW or HW problem?
adri_360 said:
Probably be the dumbest person in the universe right now. The problem was back cover that it had nfc chip, and I didn't assembled.
Click to expand...
Click to collapse
You are far from being a dumb person if you were able to disassemble this phone, one of the hardest model to repair yourself.:good:
Now start perfectly, but it doesn't detect two cameras, and this part I didn't disassembly.
SW or HW problem?
Click to expand...
Click to collapse
Well you can try to reflash the RUU again, if it still doesn't work after a ruu flash, its for sure an hardware problem (Flashing a RUU fix everything that is related to software).