[GT P1L] Issue on kernel and also while flashing OMNI - Galaxy Tab Q&A, Help & Troubleshooting

Good morning.
Recently, I've been trying to adventure myself into flashing a working 4.4.x rom on my device but only faced problems so far - managed to get it back on stock working as intended, but still would love to have it on Kitkat. So anyhow, I found issues while flashing a working kernel to run cwm properly, found about three diferent ones but the touchscreen won't work after flashing them - even after flashing a rom. I am going to try tonight Overcome's kernel and a suggestion I read while searching, to extract a .tar from the rom's zip and flash it individually (not sure if it will work).
Also, omni seems weird on my device - after flashing it, it will automatically go into encryption request and I have no idea why (remembering that touchscreen isn't working).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Could anyone care to enlight my path onwards? Thank you in advance!
P.S.: The omni instalation above didn't go through due to not flashing gapps I believe, but the touchscreen didn't work at all.

Related

[Q] Flashing CWM Recovery - can't see my phone model

Hello all! Hopefully, I put this thread in correct section. If not, please move it.
Anyway, here is my question.
I installed ROM Manager because I want to try some other ROMs on my SGS i9000 and when I want to flash the CWM Recovery, the only option I get is Google Nexus S. Is this normal? Should it show my model? Can there be any problems if I choose Google Nexus S option?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you!
What ROM are you currently on ? if its a custom ROM you may have the Nexus Drivers, and that could be why it is only showing you that option.
there are many other ways of flashing a custom ROM so dont give up if ROM Manager starts acting up.
i personally prefer a flash with ODIN and all update Flashes through CWM
I recently upgraded from 2.2.1 to 2.3.3. Here you can see more info:
As far as i know, this is not a custom ROM, just leaked one. Or am I wrong? I upgraded it with ODIN too and it wasn't hard, I just think it would be even easier, if i didn't have to use the computer and could download ROMs directly on the phone.

[Q] Cannot flash any ROM...

Hello,
I'm fed up with this Nexus One... Short story:
-flashed Evervolv's ICS (with Blackrose suggested values). Everything went ok but due to slowness I wanted to revert back to stock Gingerbread.
-flashed CWM, flashed stock HBOOT (145/95/196). Wiped all caches, user data etc.
-downloaded tons of Passion ROMS from several sites. Tried with different, freshly formatted SD cards.
I have tried to change rom's name to update.zip and flash it from recovery. Does not work (E: Can't open /sdcard/update.zip
(bad) installation aborted").
Also tried to change the name to PASSIMG.zip and start on bootloader but it does not do anything when looking for passimg...
I have looked at similar issues but did not found anything... Any suggestions?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm struggling the last 2 days with the exact same issue :/
I've been doing these kind of stuffs the last 5 years and i understand how things suppose to work, but for some reason i got to the same point you explaining here without solving it.
Please any pro out there help us?

[ask] for maclaw

first, i would like to thank to you for the development.. lot of thank..
but i have a little problem with the hosting. since iam not allowed to post at the dev section. so i make this thread. i won't ask you something new. but, like i said, i have the problem with the hosting. because almost all the Roms i've downloaded are corrupted. i use IDM, so it's all downloaded completely but they are broke. yea i know i can fix it with winrar. but, it doesn't work either. it fix a lot, but says all of boot.img in almost all the roms i've downloaded was broke (before fixing it, there are more than 90 erors. just the remaining one after fix it). so i just ask anyone who have a boot.img file to provide it for me .
since i'm not willing to use it for any kind of "special purpose". i think it wouldn't violated maclaw's rules.
i have downloaded 5 roms, and only one that working. it was the AOKP kitkat. but when i was trying to flash the Gapps, it wouldn't boot properly. it won't boot at all..
here is the sample proof :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after i try to fix it, just remain one :
i need boot.img for these ROMs :
cm10.2_golden.maclaw.20140108
aokp4.3_golden.maclaw.20140110
slim4.3_golden.maclaw.20140112
cm11.0_golden.maclaw.20140111

Running the Pac-Man rom...

Running the Pac-Man rom and no matter what gapps I flash none of them are working. What is going on?
I have downloaded the 4.4.4 Gapps-kk from here: https://basketbuild.com/gapps
Also for some odd reason it seems like I have a custom boot menu now:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And even though I don't have unFalcon installed it seems to think I do.
Is this causing my problem?
waloshin said:
Running the Pac-Man rom and no matter what gapps I flash none of them are working. What is going on?
I have downloaded the 4.4.4 Gapps-kk from here: https://basketbuild.com/gapps
Also for some odd reason it seems like I have a custom boot menu now:
And even though I don't have unFalcon installed it seems to think I do.
Is this causing my problem?
Click to expand...
Click to collapse
Where did you download the ROM from? There's nothing in it that would cause that. I doubt you actually downloaded PAC-ROM, but you can get it from the basketbuild site. I don't have anything in my ROM that will get rid of the unFalcon or that moboot background, although there are threads here that tell you how to do it. What you are showing comes from here which is a port by a 13 year-old kid who is long gone.

My Leeco Le S3 X522 Qualcomm died?

Hi, how are you guys? Good night.
It turns out that I had a problem with the installation of the magisk application, when it asked me to flash it, I did it and the phone was never the same again .
I was googling and it turns out that I found this page, and downloaded a ROM that was not the version of my phone (Leeco Le S3 X522) so, when I started with the ROM, nothing on the network or anything like that worked, so here same on the page, I found the following ROM
https://forum.xda-developers.com/le-2/development/rom-pixel-experience-t3983513
But still I can't solve the problem :/.
Help, I don't know what to do.
try eui based rom
it overwrites almost everything
PHP:
djdisodo01 said:
try eui based rom
it overwrites almost everything
Click to expand...
Click to collapse
install the following ROM
https://forum.xda-developers.com/le-2/development/rom-eui-52x-5-9-026s-acoslim-stable-t3716049
Still not working
Nothing appears in the information, none of the ROMs appears to me in this part​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I do not charge any license​
no information appears to me​
Bluetooth does not work​
Wifi does not work​
the footprint doesn't even work​

Categories

Resources