Related
Hello all, I am hoping to buy the Z1S through tmobile since I had the Z and loved it. The problem I'm having is all of the tempered glass screen protectors are for the Z1 which has the proximity sensor on the left of the Sony logo. I don't know what effect it will have putting a Z1 protector on and having it cover up the proximity sensor/light sensor.
What are you Z1S owners doing for screen protectors?
Our phone already has a screen protector so I'm not putting double screen protectors one it. When the oem one scratches up, I'll just replace it.
Sent from my Xperia Z1s
shook187 said:
Our phone already has a screen protector so I'm not putting double screen protectors one it. When the oem one scratches up, I'll just replace it.
Sent from my Xperia Z1s
Click to expand...
Click to collapse
That is true, but the Tempered glass screen protectors are very nice and I'm not sure I want to go back to the plastic film ones. Not to mention there are very few xperia z1s PET film ones that I can find.
I got this one
HTML:
www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=13&id=3638&page=1
Does the job perfectly. I have droped the phone and the protector has chipped on the corner not my screen thanks to this screen protector.
kamil1308 said:
I got this one
HTML:
www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=13&id=3638&page=1
Does the job perfectly. I have droped the phone and the protector has chipped on the corner not my screen thanks to this screen protector.
Click to expand...
Click to collapse
I have the same brand on my nexus 5 and love it, but this one is designed for the internation Z1 which is why I was asking this question in the first place. The cutout for the light sensor is on the wrong side for the US version and it would be covered.
I just purchase a case and screen protector at tmobile corporate store. They have three different case and one no name scree protector.
Sent from my C6916 using Tapatalk 2
snobrdr2324 said:
I have the same brand on my nexus 5 and love it, but this one is designed for the internation Z1 which is why I was asking this question in the first place. The cutout for the light sensor is on the wrong side for the US version and it would be covered.
Click to expand...
Click to collapse
I dont think it should i mean the glass its only 0.3 mm tick which shouldnt make as much differance for the sensors. The sensors are already covered by screen protector that it put by sony you could always take the stock screen procector off and then but the glass one on your screen.
Don't do that... Sony logo is rumored to be on screen protector.
Sent from my C6916 using XDA Premium 4 mobile app
I just ripped my OEM protector of last night and the Sony logo's are in the glass this time.
I got my Z3C today, and noticed that it comes with a screen protector built-in.
Is this something that I should not remove? Is the screen similarly fragile to the Xperia Z/ZL?
I had thought that they no longer put these protectors on from the Z2, so it is a little confusing, but I ordered a tempered glass protector, and I'm wondering if it would be wise to take off the screen protector currently on there and apply it, or if I should apply it on top of the current protector.
Thanks for help.
Yours arrived with the screen protector applied? My screen protector came in the box for me to apply myself.
Eclypz said:
Yours arrived with the screen protector applied? My screen protector came in the box for me to apply myself.
Click to expand...
Click to collapse
Are you sure there was no other screen protector below that one? I think on mine there is a screen protector which I didn't apply along with one which I did.
now that i look harder, you could be right..there might be one on there...but i can't really tell for sure, and I don't want to try to peel it off to find out (in case there really is one applied). My phone is the white model, so it's really hard to see
If there is one on there, then it's applied really well. Do you notice one applied on the back as well?
When i saw the screen protector in the box, i just assumed they left it up to us to decide if we wanted a screen protector applied.
Mine didn't even come with a screen protector in the box (Belgium)
duraaraa said:
I got my Z3C today, and noticed that it comes with a screen protector built-in.
Is this something that I should not remove? Is the screen similarly fragile to the Xperia Z/ZL?
I had thought that they no longer put these protectors on from the Z2, so it is a little confusing, but I ordered a tempered glass protector, and I'm wondering if it would be wise to take off the screen protector currently on there and apply it, or if I should apply it on top of the current protector.
Thanks for help.
Click to expand...
Click to collapse
For your sake I'd say leave it on it. It won't hurt you and it probably wont give you any trouble in terms of touch responsiveness after you've added the Tempered glass protector.
Does anyone else notice this on their Axon?
It's not very dramatic but it is bothersome and the only flaw that I seem to have on the device
No yellow on my screen at all. Could it be a screen protector you applied or is your screen without one?
augie7107 said:
No yellow on my screen at all. Could it be a screen protector you applied or is your screen without one?
Click to expand...
Click to collapse
No protector here. It's not a drastic issue but it is noticeable. I'm assuming the backlight is in the bottom and that's what's causing the discrepancy
screen protectors yes/no anyone tried them I ordered the glass ones off amazon see how the fit and work.
I bought a supershieldz tempered glass one off of EBay for $5.99. Fits nice and looks good.
http://m.ebay.com/itm/Supershieldz-...ver-For-ZTE-Axon-Pro-/201394712114?nav=SEARCH
Notice the same screen appear slightly yellowish (specially on white) towards the bottom.
Oh no.... this is the reason why I sold OnePlus One which had exactly same problem.... will see if my Axon will get the yellow bottom when I get it
The Force appears to have a better screen in it than the Z. I have both devices in my possession and have noticed a difference when you tilt the screens. On the standard Z, the further you get away from center the more washed out the colors get and at extreme angles the colors almost invert. You can take the Z Force screen all the way to the very edge to where you can't even see the screen anymore and the colors never fade away or change at all. I don't know if it's a totally different LCD of if they have bonded the plastic screen to the LCD in some new way, but the viewing angles are awesome on the Force. Just an observation.
I totally would have expected the opposite, other shatterproof displays in the past have been crap. Need to go check them out now.
mdmogren said:
I totally would have expected the opposite, other shatterproof displays in the past have been crap. Need to go check them out now.
Click to expand...
Click to collapse
This is exactly what I thought too. I was so confused I had to keep checking the phones to make sure I didn't have them in the wrong hands. I couldn't believe it. The damn plastic shatterproof screen is beating out the glass piece. This might be the future for all phones.
I put a glass screen protector over my Force screen so I have the best of both worlds. For those who don't know the shattershield screens dent very easily so be careful.
seh6183 said:
This is exactly what I thought too. I was so confused I had to keep checking the phones to make sure I didn't have them in the wrong hands. I couldn't believe it. The damn plastic shatterproof screen is beating out the glass piece. This might be the future for all phones.
I put a glass screen protector over my Force screen so I have the best of both worlds. For those who don't know the shattershield screens dent very easily so be careful.
Click to expand...
Click to collapse
Did you have the tempered glass protector on your Force while doing this comparison?
mdmogren said:
Did you have the tempered glass protector on your Force while doing this comparison?
Click to expand...
Click to collapse
No both phones were fresh out of the box. The shattershield phones come with a preinstalled plastic screen protector (which sucks) and it was on as well and nothing on top of it. Just came out of the box.
I was going to take that plastic protector off before I put the glass down but opted not to. Doesn't seem to have affected visual clarity.
Don't they say the force's screen is better?
Sent from my XT1650 using Tapatalk
sonofevil77 said:
Don't they say the force's screen is better?
Sent from my XT1650 using Tapatalk
Click to expand...
Click to collapse
Who's they? And what do you mean by better?
seh6183 said:
I was going to take that plastic protector off before I put the glass down but opted not to. Doesn't seem to have affected visual clarity.
Click to expand...
Click to collapse
The top layer of the shatter shield is plastic...and removable?
I had my phone for 7 days and there are some noticeable (albeit light) scratches. Annoying since I've babied it. I installed a screen protector yesterday on it.
HotShotAzn said:
The top layer of the shatter shield is plastic...and removable?
I had my phone for 7 days and there are some noticeable (albeit light) scratches. Annoying since I've babied it. I installed a screen protector yesterday on it.
Click to expand...
Click to collapse
It's just a plastic screen protector that peels off.
seh6183 said:
It's just a plastic screen protector that peels off.
Click to expand...
Click to collapse
You're not talking about the one that has white text that says "SIM/SD Card Tray" or what the buttons are right?
So I did I just put a screen protector on a screen protector? I mean, I'm OCD but that might have been excessive...
HotShotAzn said:
You're not talking about the one that has white text that says "SIM/SD Card Tray" or what the buttons are right?
So I did I just put a screen protector on a screen protector? I mean, I'm OCD but that might have been excessive...
Click to expand...
Click to collapse
If the phone is anything like the droid turbo 2, there is a factory plastic screen protector installed that can be removed. Since I didn't touch my phone until my glass screen protector arrived, I put my glass protector right over the top of everything and it looks great.
HotShotAzn said:
You're not talking about the one that has white text that says "SIM/SD Card Tray" or what the buttons are right?
So I did I just put a screen protector on a screen protector? I mean, I'm OCD but that might have been excessive...
Click to expand...
Click to collapse
in essence, yeah you did. The top layer of the shattershield screen is plastic and acts like what most people would consider a screen protector....
for past phones you could buy replacement top layers from Motorola...im not sure if they are on sale for our phones yet...
I'm in the market for a tempered glass screen protector as well. Glass just feels better to me. So I can remove the plastic cover and put the tempered glass instead?
kongyang9o said:
I'm in the market for a tempered glass screen protector as well. Glass just feels better to me. So I can remove the plastic cover and put the tempered glass instead?
Click to expand...
Click to collapse
I would not recommend removing the plastic layer as this is part of the shattershield and would imagine using the phone without it would void the warranty of the screen even with sing an aftermarket protector. I have not read documentation to back this up but it would be worth looking inot since the screen is guaranteed not to shatter for four years, it would be a shame to void the warranty so early into the warranty period.
LeeMullinsII said:
I would not recommend removing the plastic layer as this is part of the shattershield and would imagine using the phone without it would void the warranty of the screen even with sing an aftermarket protector. I have not read documentation to back this up but it would be worth looking inot since the screen is guaranteed not to shatter for four years, it would be a shame to void the warranty so early into the warranty period.
Click to expand...
Click to collapse
It's a removable plastic screen protector. Moto sells replacements.
The only issue I have with the Z Force screen (and it really is a non issue) is that it has an odd discoloration when looking at it with polarized sunglasses. The colors are.... I dunno.. Odd....
HotShotAzn said:
You're not talking about the one that has white text that says "SIM/SD Card Tray" or what the buttons are right?
So I did I just put a screen protector on a screen protector? I mean, I'm OCD but that might have been excessive...
Click to expand...
Click to collapse
How does the screen protector over the screen protector look? It seems that would really be overkill and mess up the texting.
bigbearballs said:
How does the screen protector over the screen protector look? It seems that would really be overkill and mess up the texting.
Click to expand...
Click to collapse
I'm glad I did it. The stock screen protector is incredibly soft. Yes it is replaceable but they are pricey.
The screen protector I chose has a matte look to it and gives the screen a little bit more tactile feel. I like it. It's not as distorted as as you'd think.
HotShotAzn said:
I'm glad I did it. The stock screen protector is incredibly soft. Yes it is replaceable but they are pricey.
The screen protector I chose has a matte look to it and gives the screen a little bit more tactile feel. I like it. It's not as distorted as as you'd think.
Click to expand...
Click to collapse
Could you give a link to the one you got?
bigbearballs said:
Could you give a link to the one you got?
Click to expand...
Click to collapse
I hate putting on screen protectors. It usually comes out crooked or there is dirt under it. This one is very forgiving. Got it on my first try and the dirt was gone by the second day.
https://www.amazon.com/gp/product/B01H1A2Q9O/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Just hate the Huawei logo. Is there a full black tempered glass protector that doesn't have a cutting for the logo?
Looking for the same thing. The logo doesn't really bother me, but my glass screen protector has this cut out for the logo that looks really ugly.
I am also looking for it
If I could hide it I would as well.
First of all its end to end so not all caseses will fit, my spigen case popped it off.
Yes it hides the logo
https://www.amazon.de/gp/product/B075YNXJ6R/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
In the reviews of this screen protector it says it doesn't cover the logo. Some people returned it because of that.
Here is mine, no cut out of the huawei wording area, just the part at the wording there is transparent not black out.
Yes exactly. Doesn't look nice. Would like it to have completely black. But it seems impossible to find.
Someone is missing a trick here. Seems there is quite high demand for it! I have been searching for the same thing!
This one appears to cover the logo area, but you might want to confirm with the seller, as the listing is for multiple models and there are no photos of the Mate 10 Pro protector.
Edit: I take that back. Comments in the feedback show that there is indeed a window through which the logo can be seen.
Another possibility is to get one with a transparent logo section and use a permanent marker on the back before applying it to the 'phone.
id love to know the screen protector brand in that screenshot that's full coverage and case friendly
Anyone find one?
Crazy that this is impossible to find...
So guys I found a solution if you're like me I hate front screen branding. I almost sold the phone because of it (I'm anal about sh*t like that) So what I did is use a small strip of black dbrand skin I had in storage and place in the opening of the where the branding is at on the tempered glass screen protector. So the end result looks great, I only notice something is there when I shine a bright light on it but other than that it looks perfect. Check the pic, give it a shot and let the rest of us know.
^ @ juggaknot77, VERY nice cover, very well hidden!
Try this
https://www.amazon.com/gp/product/B0789425HL/
juggaknot77 said:
So guys I found a solution if you're like me I hate front screen branding. I almost sold the phone because of it (I'm anal about sh*t like that) So what I did is use a small strip of black dbrand skin I had in storage and place in the opening of the where the branding is at on the tempered glass screen protector. So the end result looks great, I only notice something is there when I shine a bright light on it but other than that it looks perfect. Check the pic, give it a shot and let the rest of us know.
Click to expand...
Click to collapse
What screen protector do you use? Can you recommend it?
Thank you
SIPHOR3ON said:
What screen protector do you use? Can you recommend it?
Thank you
Click to expand...
Click to collapse
The one I used is the 2 Pack Orzero Tempered Glass Screen Protector for Huawei Mate 10 Pro, found it on Amazon.
u can try 360 degree cover
recently brought this 360 case with porsche design at the back and the front hides the Huawei logo but I don't have issues either with or without logo LOL