Q&A for [PhilZ-cwm6][n7000] Stock Kernel+CWM6+Root+exFAT+NTFS-LTA
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Hi Everybody,
I'm looking for JZO54K.N7000XXLTD
CSC code ERA
normal zip package
Can I install XXLT6 instead from xxltd?
Thanks
Try the XXLTA
XXLTA?
I don't see any link for that in above thread
raktut said:
XXLTA?
I don't see any link for that in above thread
Click to expand...
Click to collapse
There is. Just look in post number 3.
nokiamodeln91 said:
There is. Just look in post number 3.
Click to expand...
Click to collapse
still nothing...
Look harder...
All there.
Please help
Hi, I'm not a developer but I'm trying to root my phone and install CWM so I can increase my ROM. I use a Samsung Galaxy Note n7000. I tried following the instructions in the tutorials but I'm not very conversant with the tech language. My phone's kernel version - 3.0.31-704944 (or at least, that is what I can see there), and I can't seem to find the code anywhere in the posts. Can you please give me step by step guidelines and instructions (links to download files too) that can help me solve this dilemma?
Thanks.
Briggs.
- I'm not a developer
- I can increase my ROM
- I'm not very conversant with the tech language.
and
- Can you please give me step by step guidelines and instructions (links to download files too)
Especially the last one is already there. No need to repeat it. You only need to search and start reading and learning.
But when I read the first 3 quotes again my advive: stay on stock if you do not have an absolute reason for installing a custom rom
Hi!
Currenty I'm running a stock firmware for Russia (region SER) on my device (GT N7000):
PDA: N7000XXLTC
PHONE: N7000XXLT3
CSC: N7000OXELT1
(built Tue Nov 26 21:46:47 KST 2013)
Does it mean that a PhilZ-cwm6 suitable for this firmware isn't instantly ready? Or maybe I simply haven't noticed it? Probably I should ask to create a new one?
Thank you in advance.
Use the XXLTA one. It works on the rom you have.
hello,
for sgn gt-n7000B what version to use?
@nokiamodeln91 unfortunately I can't find any `xxlta` version in the post #3. Should I look for it somewhere else? Or maybe I should build it myself (and then publish somewhere)?
UPD: I've checked the source of the starting page of the main thread, and now pretty sure, that there's no xxlta on the page, even under the cuts (post #4). And I have noticed that I'm not the first in the thread who can't find it there. Please help us
UPD2: @raktut I have found N7000_LTC_kernel_CWM6-Touch_signed.zip with PhilZ kernel on another PDA-centric forum 4pda.ru (sorry, only in Russian), in the thread dedicated to GT-N7000. I haven't checked it myself yet, only saw "thanks" from other members of the forum, thus no direct link. But if you still need it, drop me a message.
BTW, what's the difference between the two, xxlta and xxltc? As I understand it's the version of whole firmwares, and there should be no or little difference when it comes down to Linux kernel, bootloader and minimal operating environment (busybox? or it uses other technology to create a minimal environment?). Maybe I could simply check kernel version, donna, busybox version etc of the published ZIP's and then choose an appropriate one?
Thank you for your response.
Noob question
Hi just wanna ask some questions regarding flashing the kernel is the internal memory gonna be wiped when I do this. Sorry for the noob question just new to this. thank you for the reply.
MJ1005 said:
Hi just wanna ask some questions regarding flashing the kernel is the internal memory gonna be wiped when I do this. Sorry for the noob question just new to this. thank you for the reply.
Click to expand...
Click to collapse
No it won't. But flashing the WRONG kernel WILL WIPE OUT your phone.
---------- Post added at 05:22 PM ---------- Previous post was at 05:15 PM ----------
just_regged said:
@nokiamodeln91 unfortunately I can't find any `xxlta` version in the post #3. Should I look for it somewhere else? Or maybe I should build it myself (and then publish somewhere)?
UPD: I've checked the source of the starting page of the main thread, and now pretty sure, that there's no xxlta on the page, even under the cuts (post #4). And I have noticed that I'm not the first in the thread who can't find it there. Please help us
Thank you for your response.
Click to expand...
Click to collapse
Where,why n how did you not able to find it? Go to phils page post#3, scroll down and hit the link given beside the word "tw only" which is below "cm only" and you will find XXLTA there.
Noob question again
Jackwu696 said:
No it won't. But flashing the WRONG kernel WILL WIPE OUT your phone.
tnx for the reply. btw for a noob like me which would you prefer that i use for flashing the recovery mode or odin mode?
please correct me if i'm wrong i have an attached image the circled letters would be the one that i will look for right? then i have to go to post # 3 click tw only link and look for the DDLSC version 5.11.2 file right? sorry if i have many questions.
Click to expand...
Click to collapse
MJ1005 said:
Jackwu696 said:
No it won't. But flashing the WRONG kernel WILL WIPE OUT your phone.
tnx for the reply. btw for a noob like me which would you prefer that i use for flashing the recovery mode or odin mode?
please correct me if i'm wrong i have an attached image the circled letters would be the one that i will look for right? then i have to go to post # 3 click tw only link and look for the DDLSC version 5.11.2 file right? sorry if i have many questions.
Click to expand...
Click to collapse
In my personal opinion, I'd rather suggest recovery rather than odin unless of course it's stated that u have to use odin to flash. Always go for the recovery whenever available.
Yes. Search for DDLSC vers. Find the zip. not the tar.md5 and flash it in recovery n u should be just fine. Happy flashing n glad to be of help
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
Succes
Tnx for the help everything went well successfully flashed the kernel. Everything is working.
How to reverse the ODIN flash of the .tar file
I used the ODIN method to root my phone, however for some reason, the phone did not get rooted, now i am trying to undo what I did.
I am a newbie to this techie stuff and not sure what I should be doing.
I would like to use the Install Root via Stock Recovery Update zip method. I loaded the file on my ext SD card and followed the steps and got error 7. Please help.
All I want to do is get rid of the insufficient memory problem because of which I am not able to install or upgrade my apps.
My log file are consuming over 1000 MB of space and I would like to clean it up. I read that rooting the phone will give me access to do so, however that did not happen, im guessing it was a root error.
Please advise.
Thank you
---------- Post added 10th November 2014 at 12:07 AM ---------- Previous post was 9th November 2014 at 11:52 PM ----------
Hi
I have GT N7000 with build DDLSC.
This is the 1st time that I have tried to root my phone and i used the ODIN method to flash the .tar file and then rooted my phone by loading the root file on my ext sd card. But I still did not get access to the system logs that I intended to delete.
I then uninstalled the root file as directed and tried the no touch method. However while the package was installing it gave an error 7. Not sure what that is.
I keep getting "insufficient memory" message everytime I try to install or upgrade an app. I saw using the diskusage app that most of the space is consumed by the system.
Can you please help me solve this problem and undo the ODIN based process that I had used.
Thank you
Flash Philz kernal without sd card?
Hi, quick question, is it possible/safe to flash philz kernal from inside recovery using the phones internal memory and not an external SD card? I don't have an SD card on hand and would prefer not to use Odin.
Related
Sorry for being a noob, i have the g1 dream sim free, it has 1.5 on it it has no market app. and when i hard reset it does not ask me to register but comes straight to home screen with clock
base - 62.41s.20.13u_2.22.16.17
kernel - 2.6.27.00205-gf2dabco [email protected] #15
build - 125040
how can i update this device please help.
I think if you know your kernel etc. you have root rights, am I right?
If yes, just flash the google apps. You find the link in the cyanogen 5.0.7 thread.
If not, I don´t know what you can do
not sure what right i have, m looking for the goole apps .. but is there a market app which can be installed, thanks for your reply by the way. though i was lost for a bit
sreekanth1 said:
not sure what right i have, m looking for the goole apps .. but is there a market app which can be installed, thanks for your reply by the way. though i was lost for a bit
Click to expand...
Click to collapse
I'm confused...so did you fix it?
gapps-ds-ERE36B-signed
search for that ^
nope have not fixed it yet. seems like its a original dev phone but it came boxed brand new. in the mean time, the data sync does not open
and
system update gives the error - com.setting error or something like that..
im looking into gapps-ds-ERE36B-signed.zip, thanks for all your help..
You can get Gapps from here:
http://kanged.net/mirror/download.ph...36B-signed.zip
Click to expand...
Click to collapse
However Gapps is not an .apk file. You need to flash Gapps with the help of a recovery ROM & for that you need to have Android SDK installed. If all this is latin and greek to you; you should visit here
http://forum.xda-developers.com/showthread.php?t=442480
Click to expand...
Click to collapse
I would also suggest you to go through ROM Bible sticky in this section.
Alternatively you can unzip gapps file and look for marketUpdater.apk in system>app folder and install it manually. I have not tried this method ever but you can give it a shot; it will not brick your phone.
Thanks for the answer guys, i think i have a dev phone had a look at the rom bible so i can root i . but i dont know what rc versoin the device is cos this does not exist in the build number as in post one. also can you recommend a stable rom update for a beginner.
at amitabhishek the first link you have posted does not work, also is there a way to root a dev phone, or is it already unlocked dont want to try a rom and brick the phone.
Moved as not Android Development.
I was going to ask this question in development thread but due to being new here wasn't allowed.
There is a *.pit file with this new firmware N7000 XXLA1. Is there no need to use it when flashing with pc odin (pda=code, phone=modem, csc=multicsc).?
if you had posted in the dev section your post would have been moved as you are asking a question not developing for the note
have you looked thru the various la1 threads in the dev section?
elsendn said:
I was going to ask this question in development thread but due to being new here wasn't allowed.
There is a *.pit file with this new firmware N7000 XXLA1. Is there no need to use it when flashing with pc odin (pda=code, phone=modem, csc=multicsc).?
Click to expand...
Click to collapse
No, you dont need to select pit file
+1 (Richy99)
You could've asked this question (if you had more than 10 posts) in the Dev section under the XXKLA1 thread, but you can't create a new thread for it. Just to be clear
Cheers guys..running the new firmware. Yes i read the posts about the new firmware in the dev( thanks dr.). As i only looked at kl7 and kl8 before which didnt have a pit file i was curious what difference it would make if i included it(also read up on pit files in this forum - not that im much more clued up about them now tho). Post #5 - i will reach 10 soon. Thanks
Sent from my GT-N7000 using Tapatalk
elsendn said:
Cheers guys..running the new firmware. Yes i read the posts about the new firmware in the dev( thanks dr.). As i only looked at kl7 and kl8 before which didnt have a pit file i was curious what difference it would make if i included it(also read up on pit files in this forum - not that im much more clued up about them now tho). Post #5 - i will reach 10 soon. Thanks
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
Pit file is partition index table file, only needed when you have to select're partition'. And this shudn't b select unless special instruction provided, lots of device bricked by this.
ok i understand! Thanks doc!
I still have to post here as i do not have 10 posts yet.
I just flashed my galaxy note to KK9 and rooted it successfully.
installed mobile odin and tried flashing it with LA1 (open file, code...)
phone rebooted and did a few things and the this happened:
in small green writing ('logo_q1.jpg' draw failed) - can't start the phone or anything - it just returns to this.
I can get back into download mode and i assume i can reflash with a firmware
Please can you help?! What went wrong
Q&A for [PXZ2-4.3.7][4.4.4-LIKE] PureXperia Z2 FOR Turbo A250 and clones
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Screenshot
Nice work...
Sent from my A250 using XDA Free mobile app
Contacts Stopped working
Well i have flashed the update also .
after every boot , i get a message that contacts has stopped working
Abhi Bhat said:
Well i have flashed the update also .
after every boot , i get a message that contacts has stopped working
Click to expand...
Click to collapse
Try wipe cache
Broken Link
Manual Update link
Main link for downloading is broken
https://docs.google.com/file/d/0B30rQN3MnGBBQzVMM2Z3WXdmLWs/edit
This link is broken
soft keys cant be disabled after flashing pxz2 3.4.7
Hi i flashed the latest pxz2 update and i cant disable the soft keys on my a919i
bug
bugs that i encounter when playing mynba2k15 when i open the game it was smooth but when the game start playing its laggy.. before on my myphone iceberg mini stock rom (im from philippines i bought it here) it was working perfect no lag at all. im a sony lover so try to use the rom on my phone.
any way how to fix it?
sorry in advance...
hello.
I want kitkat on my phone (wiko darkfull) but I have no idea how.
Its just put that zip inside the phone?
Can i use Titanium instead CWM?
How can I do a backup of my phone?
I need install anything else BEFORE start the process?
And finally... I need install first the version 4.3.5 and after 4.3.7 or i can just install the 4.3.7?
Thank you very much and sorry for so many questions.
rguptamsn said:
Manual Update link
Main link for downloading is broken
https://docs.google.com/file/d/0B30rQN3MnGBBQzVMM2Z3WXdmLWs/edit
This link is broken
Click to expand...
Click to collapse
Search Here
---------- Post added at 07:17 PM ---------- Previous post was at 07:08 PM ----------
welwitschia said:
hello.
I want kitkat on my phone (wiko darkfull) but I have no idea how.
Its just put that zip inside the phone?
Can i use Titanium instead CWM?
How can I do a backup of my phone?
I need install anything else BEFORE start the process?
And finally... I need install first the version 4.3.5 and after 4.3.7 or i can just install the 4.3.7?
Thank you very much and sorry for so many questions.
Click to expand...
Click to collapse
There is no kitkat oficial rom for Wiko Darkfull, just modified roms based on kitkat.
To install a custom rom, go here and see all avaliable roms for your phone. Just pick one you like and follow the instructions to install.
About the Purexperia Z2, you have to flash rom (4.3.5) and then flash the update (4.3.7).
To flash rom's you need to flash CWM Recovery or TWRP Recovery in your system.
If you have some doubts about "root", "CWM recovery", "TWRP recovery", "Flash Custom Roms", "Backup Nandroid" search the forum and you will find many threads to help you
getting installation aborted error while installing this rom...help pls
Awsumm
Really this rom works excellent,plzz send updates
xolo q3000
Will it work on xolo q3000, it has the same chipset.
aaayush_singh said:
Will it work on xolo q3000, it has the same chipset.
Click to expand...
Click to collapse
No
Contacts issue
When i try to open contacts , it shows unfortunately contacts has stopped and it does not get opened
[Q&A] [ROM][T][UB][SONY-UI] NeoWave™ - Version 1.2.2 out! Fixed installation issues!
Q&A for [ROM][T][UB][SONY-UI] NeoWave™ - Version 1.2.2 out! Fixed installation issues!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Oohhlala said:
plz make this ROM works on X-TX :silly:
Click to expand...
Click to collapse
(a copy posting from the xperia V forum, because it still applies, only another filename here
Ok, so I've installed several MODs on my Xperia T over time, always just by following the instructions, but always worked. I however don't really understand what does what.
I already tried the 1.2.1 version with the bootloop as a consequence, so was temporary on a stock rom again. But saw all the good reviews here, so wanted to give it another go.
So I followed instructions again:
- Bootloader unlocked and root access... check!
- Boot to recovery (TWRP 2.3.3.0)... check!
- I want to install it clean, so did a factory reset and System wipe (as said in the instructions)... check!
- Flash neo-4.4.4-mint-1.2.2.zip... hmmm:
"[..]
... Creating SymLinks ...
set_metadata_recursive: some changes failed
E:Error in [path/filename] (status 7)
Error flashing zip '[path/filename]
Updating partition details..."What could have gone wrong?
Sorry, double post..
It might be a broken zip or a bad recovery.
I suggest installing the boot.img from the rom via Flashtool, then booting to recovery and flashing the rom.
Perhaps you might also want to redownload the zip file, just to be sure.
Noone else had issues like that.
---------- Post added at 08:22 PM ---------- Previous post was at 08:21 PM ----------
Any moderator, feel free to close this thread, as I've changed my DevDB settings to allow anyone to comment in the original rom thread. :good:
WhiteNeo said:
It might be a broken zip or a bad recovery.
I suggest installing the boot.img from the rom via Flashtool, then booting to recovery and flashing the rom.
Perhaps you might also want to redownload the zip file, just to be sure.
Noone else had issues like that.
---------- Post added at 08:22 PM ---------- Previous post was at 08:21 PM ----------
Any moderator, feel free to close this thread, as I've changed my DevDB settings to allow anyone to comment in the original rom thread. :good:
Click to expand...
Click to collapse
Thanks a million for the boot.img tip... That did the trick. (guess there was something wrong with my version of TWRP)
I'm fully enjoying your NeoWave rom now
ceedees said:
WhiteNeo said:
It might be a broken zip or a bad recovery.
I suggest installing the boot.img from the rom via Flashtool, then booting to recovery and flashing the rom.
Perhaps you might also want to redownload the zip file, just to be sure.
Noone else had issues like that.
Thanks a million for the tip boot.img... That did the trick. (guess there was something wrong with my version of TWRP)
I'm fully enjoying your NeoView rom now
Click to expand...
Click to collapse
Glad to hear. Make sure to give some feedback in the thread if you like NeoWave
Click to expand...
Click to collapse
So a few days ago I was on Orange Fox Recovery. I flashed Havoc OS ROM and I flashed Gapps. I rebooted back to system and my device was fine until I couldn't press the Home button and Tab button on the navigation bar. I also couldn't download apps on the Google Play Store (as in when I pressed the install button, it carried on saying "waiting for download"). I wonder if this is something to do with the Gapps I flashed it was the pico version. I'm back on MIUI but I'm just wondering what could've been the problem?
Redmice said:
I'm just wondering what could've been the problem?
Click to expand...
Click to collapse
You seem new to the xda community, but that's not a problem, everyone has to start somewhere ! A few suggestions :
1- You have posted in the wrong section of this device as per xda rules; you should post in the Q&A section for people to reply to your queries, since this is the development section.
2- Provide helpful info about your device and which software version (base vendor, Miui version, Gapp log from SD card, lastrecoverylog.log, etc.) is installed. If you don't know how, ask there too.
3- Deleteing the post will help keep the section clean, Do your part ! Ask there and I will try to help you, although I am no expert. :highfive:
Slim K said:
You seem new to the xda community, but that's not a problem, everyone has to start somewhere ! A few suggestions :
1- You have posted in the wrong section of this device as per xda rules; you should post in the Q&A section for people to reply to your queries, since this is the development section.
2- Provide helpful info about your device and which software version (base vendor, Miui version, Gapp log from SD card, lastrecoverylog.log, etc.) is installed. If you don't know how, ask there too.
3- Deleteing the post will help keep the section clean, Do your part ! Ask there and I will try to help you, although I am no expert. :highfive:
Click to expand...
Click to collapse
If you don't mind may I ask how can I delete this post?
Redmice said:
If you don't mind may I ask how can I delete this post?
Click to expand...
Click to collapse
Two ways:
1. Pm a moderator about it. Or
2. Report your own post and write that you want to delete it. Simple really, just not doable on the xda app as far as I know. So use a browser to do that.