Hi, I tried to install CM10.2 on my girlfriends 8190N, which was rooted with the latest TWRP from Novafusion. Tried changing to f2fs in the launcher...but it failed...something to do with data partition /data/data/chrome ect comes up a lot. I made a nandroid backup but that fails when it come to the data part. I really need to solve this for tomorrow. She was running stock JB 4.1.2.....Im not a total noob at this as I have the same phone running cm11...please help guys...at the moment I can only use heimdall if I have to flash from anything from pc.....
Cheers
Its ok I did a data wipe through recovery then was able to restore backup
Related
Hi Guys.
I haven't worked much with CWM so far and couldn't find a proper answer in the threads here.
When I do a restore from a CWM backup I've not seen an option to choose just data or apps ... so I suppose the whole system including the rom and kernel will be restored. right?
As I'm happy to have CM 10.1 running after all finally, I'd just like to restore the data (SMS, etc.) from a CWM backup. Is there a possibility to do so?
Thanks for your help.
Cheers
I don't think you can do that. I used titanium backup pro to restore only the apps+setting to do that.
Sent from my tf101
Ok, thanks. Should have thought about it before.... Sometimes fingers are faster than the brain.
Cheers
You can do an advanced restore and just restore /data but it's not recommented to do this coming from stock and restoring on CM I guess...
Afro said:
You can do an advanced restore and just restore /data but it's not recommented to do this coming from stock and restoring on CM I guess...
Click to expand...
Click to collapse
Why not?
ProtheusIRC said:
Why not?
Click to expand...
Click to collapse
Stock and CM use different bases, and therefore restoring data of Stock can bring over some incompatible data/apk's and this can and most likely will cause a bootloop, from reading i think i can establish the safest way when your changing Rom's is to full wipe and 'clean' install. However when going from nightly to nightly this is not needed, and some data can be restored between same android version Rom's, for example CM10.2 is 4.3.1, data may work on slimbean 4.3.1.
Hope this clears things up for you.
I would also suggest to do a clean install without data recovery. If you want your data you can use Titanium Backup for App data. For the other personal stuff you can make a backup to your PC..
Sent from my 4X HD via XDA Premium
CWM Recovery, URGENT REPLY!!
I faced this problem that my rom got stuck on boot image, so I had another custom rom zip in my sdcard, so to install that I had to format my phone, now I have that backup and I only want to restore system settings, apps, app data, my data(sms, call logs and stuff), I dont want to restore the system or anything else which will make it get stuck on boot image again, now which choices shall I choose in advanced restore to restore only these specified items?
Please reply urgently as I have to travel in a few days and I wont be able to do it over there.
Cheers
Hi there,
I recently rooted and flashed a custom ROM onto my Samsung Galaxy S3 Mini. I'm very new to this thing and find everything quite overwhelming, but I want to learn.
I flashed this ROM - http://forum.xda-developers.com/showthread.php?t=2119219 (the v6 No Wipe version because I was petrified about losing my data if I factory reset), but the phone is now extremely laggy and buggy, so I want to go back to the stock ROM (so I can do a nandroid backup) and then try a different custom ROM like Dmod.
So, my question is, do I have to factory reset my phone to go back to stock? Or can I just flash this file (http://hotfile.com/dl/189271016/833...T-I8190N-BTU-I8190NXXALL6-1356151513.zip.html) using the CWN recovery menu without wiping? I'm asking because my phone keeps giving me an error everytime I try to backup using the CWM Recovery menu.
Thanks and if you need me to explain something in further detail, let me know.
YamiWheeler said:
Hi there,
I recently rooted and flashed a custom ROM onto my Samsung Galaxy S3 Mini. I'm very new to this thing and find everything quite overwhelming, but I want to learn.
I flashed this ROM - http://forum.xda-developers.com/showthread.php?t=2119219 (the v6 No Wipe version because I was petrified about losing my data if I factory reset), but the phone is now extremely laggy and buggy, so I want to go back to the stock ROM (so I can do a nandroid backup) and then try a different custom ROM like Dmod.
So, my question is, do I have to factory reset my phone to go back to stock? Or can I just flash this file (http://hotfile.com/dl/189271016/833...T-I8190N-BTU-I8190NXXALL6-1356151513.zip.html) using the CWN recovery menu without wiping? I'm asking because my phone keeps giving me an error everytime I try to backup using the CWM Recovery menu.
Thanks and if you need me to explain something in further detail, let me know.
Click to expand...
Click to collapse
That firmware is a zipped odin-file. Can't be flashed in CWM.
Make a cwm nandroid backup of your "/data" to your external sd (that's your installed apps)
You can also backup your apps and appdata using titanium backup or similar, for later restore.
Just remember to never backup/restore systemapps.
Backup internal sd to computer just to be sure, if you in any situation have to make a factory reset. Make sure any kind of backup is on your external sd before you make factory reset, or it will be lost forever
YamiWheeler said:
Hi there,
I recently rooted and flashed a custom ROM onto my Samsung Galaxy S3 Mini. I'm very new to this thing and find everything quite overwhelming, but I want to learn.
I flashed this ROM - http://forum.xda-developers.com/showthread.php?t=2119219 (the v6 No Wipe version because I was petrified about losing my data if I factory reset), but the phone is now extremely laggy and buggy, so I want to go back to the stock ROM (so I can do a nandroid backup) and then try a different custom ROM like Dmod.
So, my question is, do I have to factory reset my phone to go back to stock? Or can I just flash this file (http://hotfile.com/dl/189271016/833...T-I8190N-BTU-I8190NXXALL6-1356151513.zip.html) using the CWN recovery menu without wiping? I'm asking because my phone keeps giving me an error everytime I try to backup using the CWM Recovery menu.
Thanks and if you need me to explain something in further detail, let me know.
Click to expand...
Click to collapse
Backup your data in CWM, flash my ROM and restore your data with CWM.
Benzonat0r said:
Backup your data in CWM, flash my ROM and restore your data with CWM.
Click to expand...
Click to collapse
CWM has NO choice to backup/restore only parts of the device. Only a full backup is possible.
This is only in TWRP. Pity! I only use CWM because TWRP makes corrupted backups (three times) for me.
Or is it possible to pick out only DATA from the backup? And what is happen with the dalvik cache, which
consists of the byte-code for all installed apps, optimized for the ROM which created it?
"advanced restore and restore only /data". Is this the way in CWM that you mean @benz?
JackoMJ
Yes that's exactly what I meant, "advanced restore and restore only /data"
You don't have to worry about cache and dalvik because it's automatically created on the initial start.
thx for the information Benz (usefull in the future perhaps),
but i´ve decided to use Titanium Backup.
JackoMJ
Hi Devs.
I am using Cocore kernal and my mobile is rooted. I have cwm 6. I took backup of my stock rom and after that i moved to Cm11. I installed few apps on cm11 after that i took backup of cm11 also. After That I have installed PACROM and i have backup of that rom also.
Now I have Nandroid backup of all three ROMs( STOCK, CM and PAC)
Then i have decided to restore my stock ROM . Everything went well but when it started it start without any user data and start in start up wizard with message goole.process fail and i got stuck in setting wizard.
After that i tried to restore CM and This time CM start as new rom without gapps and user data but works very fine.
Finally I try to restore pac and it comes out with same result as CM.
Now whenever i restore my backup it restore only rom but no user data or apps.
After that i tried many solution.
I have found one problem in recovery that failed to mount preload
I have fixed the permission but unable to mount preload .
I found one wierd solution to restore stock with data. : First i restore it in CWM after that i reboot my device in download mode and i flash stock JB via odin on my device and suddenly my stock rom start working with all user data
But this solution works with only stock backup and i don't want to restore stock every time via odin.
So please help me to solve this problem.
androiddoctor said:
Hi Devs.
I am using Cocore kernal and my mobile is rooted. I have cwm 6. I took backup of my stock rom and after that i moved to Cm11. I installed few apps on cm11 after that i took backup of cm11 also. After That I have installed PACROM and i have backup of that rom also.
Now I have Nandroid backup of all three ROMs( STOCK, CM and PAC)
Then i have decided to restore my stock ROM . Everything went well but when it started it start without any user data and start in start up wizard with message goole.process fail and i got stuck in setting wizard.
After that i tried to restore CM and This time CM start as new rom without gapps and user data but works very fine.
Finally I try to restore pac and it comes out with same result as CM.
Now whenever i restore my backup it restore only rom but no user data or apps.
After that i tried many solution.
I have found one problem in recovery that failed to mount preload
I have fixed the permission but unable to mount preload .
I found one wierd solution to restore stock with data. : First i restore it in CWM after that i reboot my device in download mode and i flash stock JB via odin on my device and suddenly my stock rom start working with all user data
But this solution works with only stock backup and i don't want to restore stock every time via odin.
So please help me to solve this problem.
Click to expand...
Click to collapse
When you want to go back from CM 11 and 10.2 to previous version of Android you must either to format Prelaod parition, or flash stock JB. On those two versions developers are using that partition as SWAP, so it is has differend format and can't be used for files that should be there on previous versions.
Solution 1: http://forum.xda-developers.com/showthread.php?t=2612540
Solution 2: What you did, flash stock JB from Odin.
I have a new n900a with stock 4.4.2. I rooted the phone with the TowelRoot and then installed SS 4.72. I backed up my phone with a nondroid backup via SS, titanium backup as well as Helium all on my external SD . The problem is that I tried to flash the Alliance ROM v6 and it didnt work. So I said, hey I've got a full backup lets just restore to the stock ROM and no foul. Well it happens that it FAILED and I noticed that SS cant mount the system partition.
From what I have read, the stock system file for AT&T is not available so I cant flash a stock rom back on my phone. I think that somehow the phone got corrupted. I tried wiping, format data, delvic cache, data, etc. via SS 3.72, nothing works. SS shows the system partition empty. I suspect this may have happened because the ROM I was flashing was based on using SS 3.71. The developer said I should not have a problem flashing the ROM with SS 3.72. I've been flashing roms for a couple of years but have never come across this and am totally stumped. Can anyone point me in the right direction or do I have an $800 brick?
ccaceres said:
I have a new n900a with stock 4.4.2. I rooted the phone with the TowelRoot and then installed SS 4.72. I backed up my phone with a nondroid backup via SS, titanium backup as well as Helium all on my external SD . The problem is that I tried to flash the Alliance ROM v6 and it didnt work. So I said, hey I've got a full backup lets just restore to the stock ROM and no foul. Well it happens that it FAILED and I noticed that SS cant mount the system partition.
From what I have read, the stock system file for AT&T is not available so I cant flash a stock rom back on my phone. I think that somehow the phone got corrupted. I tried wiping, format data, delvic cache, data, etc. via SS 3.72, nothing works. SS shows the system partition empty. I suspect this may have happened because the ROM I was flashing was based on using SS 3.71. The developer said I should not have a problem flashing the ROM with SS 3.72. I've been flashing roms for a couple of years but have never come across this and am totally stumped. Can anyone point me in the right direction or do I have an $800 brick?
Click to expand...
Click to collapse
Head on over to the soft brick thread for instructions on how to undo what you did. If that fails, well, you always have the hard debrick method.
Hello, I have a question and I hope someone can help me: I have the N-version of galaxa s3 mini and yesterday I flashed CM12. I forgot to save important files, but before flashing I did a backup. Unfortunately when I tried to restore from cwm my phone went in bootloop. Now how can I restore my old backup made with the stock rom? Do I have to flash the stock rom with odin and then try to restore my backup? Is it a problem of different format of the partition? Do I have to check the re-partition button in odin? Please help me! Thanks!