THIS IS ONLY A TESTPORT FOR THE P7-L10 based on the P7-L07!
This Rom is only for P7-L10 so don't try it on another Variant!
THIS ROM AS USERS ARE REPORTING IS NOT BOOTING! ON 4PDA and OTHER SIDES PEOPLE ARE WORKING ON A SOLUTION TO FLASH THE NEW ROM TO OUR L10!
IF THERE ARE ANY NEWS I WILL POST THIS HERE! BUT ON THIS ROM'S LTE IS NOT WORKING WHAT IS A ABSOLUTE NO GO FOR ME! SO I WILL WADE FOR L10 RELEASE!
This Rom is modified by me and mush safer to flash then the original L00/05/07/09 variants.
It will not update your'e Kernel or Modem software!
THIS ROM IS PREROOTED!
SO IF YOU FU**ED UP YOURE PHONE OR ANYTHING IS NOT WORKING RIGHT!
YOU FLASHED THIS AND NOT I ! SO IT WAS YOURE DECISION!
HOW TO INSTALL
Flash the rom via TWRP/CWM (MAKE A FULLWIPE!)
reboot!
DOWNLOAD:
https://mega.co.nz/#!UIFQzRoD!GpS1UwX1ge6N7XkvrQ8PTIMYkVqzw9aeglpcovKakGU
As many Users Reporting this Verison is working on L10
4PAD Version from oxalis1970
Flash it via Stock recovery
Download
https://yadi.sk/d/cGZ1_5QkcExNQ
if Lte is working or the rom is multilang i don't no this...
who has tested this pls report back
Phone does not boot
Wich firmware needs to be installed ?.
Cause i see for other P7 wariants need 126 or 125
regards
Superwitschi said:
Phone does not boot
Click to expand...
Click to collapse
What for are rom base have you used before flashing?
And did you make any modifications to the MIUI Rom from l-07 to get it Boot ?
lulisat said:
Wich firmware needs to be installed ?.
Cause i see for other P7 wariants need 126 or 125
regards
Click to expand...
Click to collapse
I think 133SP01 or 135 SP/SP02/03 as they are the latest.
Sent from my HUAWEI P7-L10 using XDA Free mobile app
From 126, no modifications in miui rom.
natorus87 said:
What for are rom base have you used before flashing?
And did you make any modifications to the MIUI Rom from l-07 to get it Boot ?
I think 133SP01 or 135 SP/SP02/03 as they are the latest.
Sent from my HUAWEI P7-L10 using XDA Free mobile app
Click to expand...
Click to collapse
i tryed all and no bootlop.
Someone was able to make the rom boot and working?
mine boot loop....
mine booting perfect and all is working wery well.
just put first 135sp03 nd then donwload emui3 L7toL10
download emui3 L7-L10 on 4pda extract and put dload folder on sd or interna; card and du the update from the local update.
you can find a link on 84 page on 4pda forum
regards
lulisat said:
mine booting perfect and all is working wery well.
just put first 135sp03 nd then donwload emui3 L7toL10
download emui3 L7-L10 on 4pda extract and put dload folder on sd or interna; card and du the update from the local update.
you can find a link on 84 page on 4pda forum
regards
Click to expand...
Click to collapse
Not bad
Have you tested lte? And is this rom root able? And language is multi?
Sent from my HUAWEI P7-L10 using XDA Free mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
haninatoon said:
Click to expand...
Click to collapse
Please Provide Steps to Flash This
Someone could put 4PDA version in a faster repo please?
haninatoon said:
Click to expand...
Click to collapse
Why the resolution is hd?
rifad20 said:
Why the resolution is hd?
Click to expand...
Click to collapse
ROG Technology from Chinese ROM-s or Screensaver option.
Thanks for this. Finally it is working. But I went back to B135. Sad to say, I can't root 3.0. I'll just go back if this rom can be rooted already.
Can someone pls extract boot.img from this rom or make a backup of it with twrp?
I can not extraxt this image from update.app..
natorus87 said:
Can someone pls extract boot.img from this rom or make a backup of it with twrp?
I can not extraxt this image from update.app..
Click to expand...
Click to collapse
Just Few Hours Back EMUI 3.0 Flashable Zip was released for P7-l07
Its on pan.baidu and i cant access the webpage .... so can someone mirror it
Link to Rom
andromodgod said:
Just Few Hours Back EMUI 3.0 Flashable Zip was released for P7-l07
Its on pan.baidu and i cant access the webpage .... so can someone mirror it
Link to Rom
Click to expand...
Click to collapse
thx but don't try this... the kernel is not right unpacked and repacked so your'e device will hang and reboot on boot splash...
How is the rom stability? I want flash this but i'm scared
Related
Hi, here is the stock 2.3.5 (kernel version 2.6.35.7) from this site:
http://www.arcoa.com.tw/announce.jsp
I extract it via 7zip and take the .nb0
Then flash it via SUT LR v1.8.2
here is the firmware.
http://www.mediafire.com/?j9djb1jwbab4yxg
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thanks for uploading this rom..
we (fih-fb0) user have more rom choices
we have got another brother from different mother .. LOL xD
which kernel version is this rom using???
& some screenshots of ui also if possible
can someone test this rom??
confirm kernel version if its 2.6.32.x or 2.6.35.x
it is a .zip file. so do we need to extract the nb0 part of it and flash via sut as the op is saying?
hi
im not sure if this is a varient of our phone i did google it and u can see below link and kindly confirm it seems to look diffrent lets make sure it is the same before flashing lets not get any briked phone
see this link :
link : http://www.engadget.com/2011/06/24/sharp-sh8188u-is-run-of-the-mill-1ghz-android-awaits-possible/
haree said:
hi
im not sure if this is a varient of our phone i did google it and u can see below link and kindly confirm it seems to look diffrent lets make sure it is the same before flashing lets not get any briked phone
see this link :
link : http://www.engadget.com/2011/06/24/sharp-sh8188u-is-run-of-the-mill-1ghz-android-awaits-possible/
Click to expand...
Click to collapse
this is a fih_fb0 variant , tj_style also used this phones launcher from froyo rom in andro-id rc2
nitindeck said:
this is a fih_fb0 variant , tj_style also used this phones launcher from froyo rom in andro-id rc2
Click to expand...
Click to collapse
hi
thanks again for the info so ur saying it is safe to flash this rom and try it
haree said:
hi
thanks again for the info so ur saying it is safe to flash this rom and try it
Click to expand...
Click to collapse
bro flash it fearlessly & confirm its kernel version & some screenies of ui if its old one or new one
if default language is not english
to change it to english
nitindeck said:
if default language is not english
to change it to english
Click to expand...
Click to collapse
hi
thanks again so does this mean that u have tried it and is it 2.3.5 and can i convert it to firmware.nb0 and flash via the phone as im more confy this way than the suit sorry if this is bugging u and thanks in advance
I'm surely its a 2.6.35.7 ,
btw I will try find kernel sources at code aurora
haree said:
hi
thanks again so does this mean that u have tried it and is it 2.3.5 and can i convert it to firmware.nb0 and flash via the phone as im more confy this way than the suit sorry if this is bugging u and thanks in advance
Click to expand...
Click to collapse
no this tutorial sreeny is from huawei china fourums for huawei honor
edowar said:
I'm surely its a 2.6.35.7 ,
btw I will try find kernel sources at code aurora
Click to expand...
Click to collapse
God blesses Sharp to launch new kernel if its really is, still not confirmed yet. but if it is
then edowar pls release it next cm7.2update, a final one, there should be a 90% kgsl grahic drivers in this & if not there, then its no hard add to it
& breakin' new fps limits
device rebooting continuously......
will try to make it work, and then reply you guys....
vivekb said:
device rebooting continuously......
will try to make it work, and then reply you guys....
Click to expand...
Click to collapse
you might have messed some stuff, theres a tutorial to use sult somewhere
Just flashed it it works
hi
i just flashed it via the phone and not the SUT it works and it is 2.3.5 as per the info i see on the phone the phone did hang a little im removing the batter and restarting it will keep u posted on the same
Feed back : everything is working fine as of now i have no problem it has the sharp launcher and it is 2.3.5
SUTL 1.8 is giving error, however was able to download the guide, translate to english, SUTL new version is in 5 parts so download it and extract and install..
and kernel is
vijayar said:
SUTL 1.8 is giving error, however was able to download the guide, translate to english, SUTL new version is in 5 parts so download it and extract and install..
and kernel is
Click to expand...
Click to collapse
hi
use sutl 1.7 it is what works for Indian phones or if u know how to flash from the phone do it that is what i did had to restart the phone and now it is working fine
Miui v5 Huawei Ascend P7
Developed by ry09iu
Al credits to him, i only made the translation.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to install
1. Install TWRP
2. Download rom and place on your SD
3. boot recovery.
--- Shutdown phone
--- Hold volume up+power
4. Backup!!!
5. Factory reset
6. Flash rom
7. Reboot and setup your phone
8. Set in developer option animation to 0,5x
9. Reboot an enjoy
Miui 4.9.18 ger/eng
https://mega.co.nz/#!qx5SVTzD!yaHLRqEQudhctpZ1uC1Da1utWgzy5pskiQrr6RqLgIg
swMiui 4.11.21 ger/eng
https://mega.co.nz/#!2g5kHJxJ!DN7dg-frIdmRvdn6sz5QzOt-cOsTZkP0up8yYgwkCm4
________________________________________________________________________
swMiui 4.11.29 german/english based on EMUI3.0 B608 With gapps!
https://mega.co.nz/#!fwIjyAiA!JP6tAMWQuopeZKpTOU3rrLlI8XNz26ItwgNR6Qacd3c
swMiuiMulti 4.12.12 german/spanish/french/italien/english/turkish
https://mega.co.nz/#!WswzlCLA!fmz3oVR0QTYNT90JtGlPmmRDo2lxtP0A8tR1eNaGxSA
Gapps for Multi rom ( flash after you installed the rom )
https://mega.co.nz/#!39x1BKqR!ZSCkfKr-qiQ4TdrqNGJLLszRM0hlCq6b1yMpHqsX7cQ
How to install: Exactly like Se7en rom
Be sure you are on latest B133/B135/B136/B138
1. Root and Unlock your'e Bootloader with Vroot or Rootgenius
2. Install EMUI 3.0 for P7 by Oxalis from 4pa.ru via original recovery with local update from the update.app in settings
(when you have twrp or cwm flash the original via fastboot ( fastboot flash recovery recovery_stock.img )
https://docviewer.yandex.com/?url=y...=&name=EMUI_3.0_for_P7-L10.rar&c=54d68ec32704
3. Reboot in the Rom and then into bootloader(maybe you have to do this with adb; adb reboot booloader)
4. Flash cwm via Fastboot (fastboot flash recovery recovery_cwm.img)
5. Reboot into CWM make a full wipe and install swMiui4.11.29 or newer version
6. Let the Phone boot into the Rom
7. Now reboot again into CWM and flash you're CUST data
8. Wipe Cache/Dalvik
9. You are done!
The cwm recovery and the cust data you can get here!
CWM: https://mega.co.nz/#!H4w13QYB!P6_g6PSvM4F9z43F--Y9ulM4rImSoUxwDZyJ69IQby4
Cust files: https://drive.google.com/folderview?id=0BzAbvTCMo2YbSXB2NGpjeFZoMmc&usp=sharing
If email app does not work then please download this email apk and install it.: https://mega.co.nz/#!v15GgJba!4noWI7M3q4iNS7fPnOEhABOdOTcUOQsWU3De0U6FZ-E
I think this is a typo. But since the P6 is supported maybe there will be an actual Miui for the P7.
Gesendet von meinem HUAWEI P7-L10 mit Tapatalk
I hope it comes soon.
You will soon get a port, the same guy who has made the port for the P6 posted a pic on weibo with an P7 running MIUI so probably he releases the port soon.
taaeem said:
You will soon get a port, the same guy who has made the port for the P6 posted a pic on weibo with an P7 running MIUI so probably he releases the port soon.
Click to expand...
Click to collapse
Do you have a link to the forum?
Beukhof1 said:
Do you have a link to the forum?
Click to expand...
Click to collapse
Lokk in the first post.
Max4000 said:
Lokk in the first post.
Click to expand...
Click to collapse
No i ment from Weibo what Taaeem was talking about
Beukhof1 said:
No i ment from Weibo what Taaeem was talking about
Click to expand...
Click to collapse
I also searched for the weibo link but i can't find it
Here you go guys: http://pan.baidu.com/s/1nt1Ei7n I don't know for which version this ROM is but I think you will get it http://pan.baidu.com/share/home?uk=2936987094
taaeem said:
Here you go guys: http://pan.baidu.com/s/1nt1Ei7n I don't know for which version this ROM is but I think you will get it http://pan.baidu.com/share/home?uk=2936987094
Click to expand...
Click to collapse
Nice! Thanks dude! Does this include english lang?
Miui P7 TD 4.9.3
miui_p7td_4.9.3_b8biih72qq_4.4.zip_
http://pan.baidu.com/s/1nt1Ei7n
Superwitschi said:
Miui P7 TD 4.9.3
miui_p7td_4.9.3_b8biih72qq_4.4.zip_
http://pan.baidu.com/s/1nt1Ei7n
Click to expand...
Click to collapse
Flashing now :fingers-crossed:
Beukhof1 said:
Flashing now :fingers-crossed:
Click to expand...
Click to collapse
Please report, i think i can't flash it because i'm from europe. I don't think it works for me because i need WCDMA
Superwitschi said:
Please report, i think i can't flash it because i'm from europe. I don't think it works for me because i need WCDMA
Click to expand...
Click to collapse
I have a europe phone too P7-L10. Flashed with TWRP
So far:
Working:
Camera
Sound
GPS
Wifi
Text messages
Not working:
Calls (could not connect)
2G/3G/4G
Any updates? Can be flashed on P7-L10 international version?
Beukhof1 said:
I have a europe phone too.
So far:
Working:
Camera
Sound
GPS
Wifi
Text messages
Not working:
Calls (could not connect)
Click to expand...
Click to collapse
What about 3G, LTE Network?
Did you flash it with TWRP reoveey?
Whatsapp working?
Can you make a locat?
Superwitschi said:
What about 3G, LTE Network?
Did you flash it with TWRP reoveey?
Click to expand...
Click to collapse
Updated post
Beukhof1 said:
Updated post
Click to expand...
Click to collapse
Thats because we need WCDMA in Europe
Android 6.0 Marshmallow & EMUI 4.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OTA-GRA-L09C432B313
Required for updating GRA-L09C432B200 !!!
Link: https://mega.nz/#!IEhCRaRR!GT6Ds9EywDoW5Dd8ZdKVesyQUItbiSwCPaapFhAenEY
Mirror : https://goo.gl/2s0pJe
Thanks to raider2k9
Change log:
B200 is required for updating, with B350 it fails at 4%!!!!
hi, thanks for your share ! this version have Touchplus option ?
deraiz12 said:
hi, thanks for your share ! this version have Touchplus option ?
Click to expand...
Click to collapse
Yes
Is it flashable with TWRP or do I need to go back to stock recovery?
How i have to do update- local or with 3 buttons
just make a /dload directory in your internal storage, put the zip with update there and update it through local update
mutaf said:
Android 6.0 Marshmallow & EMUI 4.0
OTA-GRA-L09C432B313
Required for updating GRA-L09C432B200 !!!
Link: https://mega.nz/#!IEhCRaRR!GT6Ds9EywDoW5Dd8ZdKVesyQUItbiSwCPaapFhAenEY
Mirror : https://goo.gl/2s0pJe
Thanks to raider2k9
Change log:
Click to expand...
Click to collapse
Hi guys, but this firmware is the ufficial update? That will go OTA in Europe?
zar marco said:
Hi guys, but this firmware is the ufficial update? That will go OTA in Europe?
Click to expand...
Click to collapse
yep, that the official one, betatesters receive
raider2k9 said:
yep, that the official one, betatesters receive
Click to expand...
Click to collapse
Ok, thanks. I'm registered at betatesters's program
Inviato dal mio SGP321 utilizzando Tapatalk
Is it possible to go from B350 to B200, then instaling B313? And if yes, could anyone plz provide a B200 donwload link?
olegulen said:
Is it possible to go from B350 to B200, then instaling B313? And if yes, could anyone plz provide a B200 donwload link?
Click to expand...
Click to collapse
Well if you have time you can do it like me... I had a link with full B200 but lost it so I installed B170 from here - if you are on B350, you probably already used this method - and then updated to B200 via OTA and then to marshmallow... It takes a while though.
please, i am on b200 and created the dload folder in internal storage. the update incremental is relevated by updater but when restart in recovery "the ota don't find update.zip".... what can be? thanks
edit: solved inserting dload folder in external sd card
please, how to disable logservice tip???
thanks
myabc said:
please, how to disable logservice tip???
thanks
Click to expand...
Click to collapse
I just swipe it away and it never show again
one81 said:
I just swipe it away and it never show again
Click to expand...
Click to collapse
yes but only temporarly... at reboot it launches again. that log must be permanently disabled for privacy!
myabc said:
yes but only temporarly... at reboot it launches again. that log must be permanently disabled for privacy!
Click to expand...
Click to collapse
remember it´s a beta for testing purpose.. I think you can´t disable it to 100% because it collect information about crash, performance
when i go to install this, it says there is no update.app present and now i am stuck in a bootloop. anyone got any ideas?
brezzz said:
when i go to install this, it says there is no update.app present and now i am stuck in a bootloop. anyone got any ideas?
Click to expand...
Click to collapse
you have to flash the update.zip, not extracted update.app.. since this isn´t a full release!
In a bootloop you have to flash via fastboot the extracted boot.img, recovery.img and system.img from b200 full to get your device back to work
Can someone posts screenshots from battery stats.
Hello guys!! Finally i found out the factory ROM based on MM for Kenzo (Redmi Note 3 Pro)
THIS ROM AREN'T FOR NORMAL USAGE. VoLTE not working. Stop spam about VoLTE.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thx to @sasaboor64 for the screenshots
Thx to @sasaboor64 for this easy tutorial and thx to all the contributors for hard and fast working!!
1. Just extract this downloaded file somewhere (it will be around 1.5gb)
2. Boot device into fastboot mode
3. Open "8976_fastboot_all_images.bat" from extracted files. CAUTION: all data on INTERNAL STORAGE will b LOST
4.wait for rom to flash(reboots automatically)
if u need twrp now:
1. boot again into fastboot mode
2. Flash any twrp u like
Heres the link to the fastboot rom with decrypted package
https://www.androidfilehost.com/?fid=24694152805483468
Recovery ROM version: https://www.androidfilehost.com/?fid=24588232905723835
24/08/2016 26:16 P.M. UPDATE:
for unlock bootloader under this rom (working with official unlocked devices), boot the phone in fastboot and do
" fastboot oem unlock-go "
25/08/2016 15:27 P.M. UPDATE:
Mirror from DropBox by @sasaboor64 : https://www.dropbox.com/s/1hzp50fzwg7l1pt/mm_qualcom_kenzo.rar?dl=0
Decrypted Boot.img patched by @sasaboor64 : https://www.dropbox.com/s/pkr4rmv3iaqk2j0/Decrypted boot.img?dl=0
Please add credits if you do an fork or use part of this ROM. :good:
finally!waiting for someone to confirm how it goes.
Any screenshots available, if its working? And please mention source of that file please
nothing in the folder
It is probably Global Beta 6.7.21, that was for short uploaded on MIUI forum by mistake. It was removed few minutes later. It is MM rom but only for developers internal testing.
If it's 6.7.21 Beta, ROM cannot be updated to later Beta versions (OTA is not supported)
http://forum.xda-developers.com/redmi-note-3/development/mm-global-dev-6-7-21-fastboot-rom-t3423895
Thanks a lot Naphtha.
Btw
Can you provide us a zip which can be flashed from the recovery? That would be really great.
Fastboot is too much trouble and will probably lock bootloader.
Sent from my Redmi Note 3 using Tapatalk
bluedolphin said:
It is probably Global Beta 6.7.21, that was for shot uploaded on MIUI forum by mistake. It was removed few minutes later. It is MM rom but only for developers internal testing.
If it's 6.7.21 Beta, ROM cannot be updated to later Beta versions (OTA is not supported)
http://forum.xda-developers.com/redmi-note-3/development/mm-global-dev-6-7-21-fastboot-rom-t3423895
Click to expand...
Click to collapse
No is the an pure version of Android builded by Qualcomm for Xiaomi. Read first of post thx
Why is Qualcomm building Roms for Xiaomi?
Anyone tried this rom?
Naphtha said:
Hello guys!! Finally i found out the factory ROM based on MM for Kenzo (Redmi Note 3 Pro)
Is flashable via fastboot:
https://mega.nz/#F!Q9dj2YyY!40fzQ7RpHH8Xi0XcSgRBrQ
Please add credits if you do an fork or use part of this ROM. :good:
Click to expand...
Click to collapse
have u flash it?
if yes plz make twrp backup and upload so we can restore......
Is VoLTE working in this rom?
Also any flashing instructions??
Will this cause IMEI loss issue??
Ripbaria said:
have u flash it?
if yes plz make twrp backup and upload so we can restore......
Click to expand...
Click to collapse
I can't test it now because i haven't kenzo (is already shipped in this week i hope to got it), i decided to release it today, only because more people do some pressure for have it. :highfive:
Aadeep said:
Is VoLTE working in this rom?
Also any flashing instructions??
Will this cause IMEI loss issue??
Click to expand...
Click to collapse
Yes is possible, is untested
Naphtha said:
I can't test it now because i haven't kenzo (is already shipped in this week i hope to got it), i decided to release it today, only because more people do some pressure for have it. :highfive:
Click to expand...
Click to collapse
thanks waiting for it.......
Naphtha said:
Yes is possible, is untested
Click to expand...
Click to collapse
Flashed rom, Booted
Edit:
No Gapps, Old Icons
Aadeep said:
Flashed rom, Booted
Click to expand...
Click to collapse
Thanks for taking the risk, mate.
Aadeep said:
Flashed rom, Booted
Edit:
No Gapps, Old Icons
Click to expand...
Click to collapse
:highfive: is an factory ROM need to be cleaned :good: thx for sharing
Aadeep said:
Flashed rom, Booted
Edit:
No Gapps, Old Icons
Click to expand...
Click to collapse
So is it a clean aosp Qualcomm ROM based on marshmallow?
Any screens? Features?
Wysłane z mojego Redmi Note 3 przy użyciu Tapatalka
AravindhStanley said:
So is it a clean aosp Qualcomm ROM based on marshmallow?
Click to expand...
Click to collapse
Yep bro, just look build prop need to be cleaned from deveoping apps
Hello friends here I leave this custom rom
official website
https://samsungvn.com/threads/rom-c...s8-aurora-v33-0-rebuild-by-toanluu68☆☆.27212/
Download from mega
https://mega.nz/#!Bt9njQLT!1rLEGylx8ZhiZauQm-thfxs1TBqQeHBUXPAbpgn3vks
Good greetings from spain
v8 kernel
https://mega.nz/#!1x5iwKjR!9UEcawSybKh0wwNGWmv6YrgPB22gM7vZY81d-u7l-yY
Decryption key
!9UEcawSybKh0wwNGWmv6YrgPB22gM7vZY81d-u7l-yY
Thanx a lot for this new rom !
Any screenshots ?
How to install it on S6 Edge + ?
More details please....
Screenshots?
shehabskull said:
Screenshots?
Click to expand...
Click to collapse
The installation is easy from advanced recovery, make full wipe and install file AURORAROM.V33.0 rebuil…anluu68.zip , you will get the aroma install and there are well choose everything you want to put and for your model.
Postscript: if you look at the official page there are more different custom that are also worth but this is the best good a greeting
:good:
the aod works with khongloi kernel or is a new one?
blackbravo said:
the aod works with khongloi kernel or is a new one?
Click to expand...
Click to collapse
If you have installed the khongloi v11 kernel, I aod I do not use it because it spends a lot of battery, if it works, but if I recommend better to change the kernel for the khongloi v8 that spends less battery and funcina all the same bixby vision goes perfect
jesusrios said:
If you have installed the khongloi v11 kernel, I aod I do not use it because it spends a lot of battery, if it works, but if I recommend better to change the kernel for the khongloi v8 that spends less battery and funcina all the same bixby vision goes perfect
Click to expand...
Click to collapse
My question is, does AOD works with a new kernel made by toanluu68, or need to use the khongloi one? just make that question because khongloi is a battery killer...
Thanx again for your replies !
Can't wait to try it ! I'll do so as soon as possible, and will give you feedback. I'm on 928f. Hopin' that everything will go right...!
jesusrios said:
The installation is easy from advanced recovery, make full wipe and install file AURORAROM.V33.0 rebuil…anluu68.zip , you will get the aroma install and there are well choose everything you want to put and for your model.
Postscript: if you look at the official page there are more different custom that are also worth but this is the best good a greeting
:good:
Click to expand...
Click to collapse
Well I was asking for Screenshots.. Whatever.. Does this rom include stuffs like always on display?
Edit: and does this rom support 928c model?
Sent from my E6633 using Tapatalk
shehabskull said:
Well I was asking for Screenshots.. Whatever.. Does this rom include stuffs like always on display?
Edit: and does this rom support 928c model?
Sent from my E6633 using Tapatalk
Click to expand...
Click to collapse
Is that I already have it retouched with applications that do not bring and I have a dark theme ,yes 928c,yes aod
I flashed it and I am stock on kernel logo please help
UPDATE : I flashed a custom kernel for my model and all seems fine .. thanks for sharing !
shehabskull said:
Screenshots?
Click to expand...
Click to collapse
Here ya go.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G9550 using Tapatalk
.
Sent from my SM-G9550 using Tapatalk
shehabskull said:
I flashed it and I am stock on kernel logo please help
UPDATE : I flashed a custom kernel for my model and all seems fine .. thanks for sharing !
Click to expand...
Click to collapse
What's your model ? This custom kernel works on 928f ? A download link for it please ?
Prat Guen 22 said:
What's your model ? This custom kernel works on 928f ? A download link for it please ?
Click to expand...
Click to collapse
My model is 928c, I extracted the boot.img from N-lite rom
Here is the link :
https://drive.google.com/file/d/0B4fPfwzZkDZ1TWJiVTN5LXUzOVk/view?usp=drivesdk
Sent from my E6633 using Tapatalk
Just installed... But doesn't work... I can't enter my PIN code... I can't enter more than 4 caracters when ask for PIN code.... Mine is longer... Why...?!?!?!
Got no phone anymore... Please help!:crying::crying::crying::crying::crying::crying::crying:
butchieboy said:
.
Click to expand...
Click to collapse
Are you using a kernel? If so wich one?
Prat Guen 22 said:
Just installed... But doesn't work... I can't enter my PIN code... I can't enter more than 4 caracters when ask for PIN code.... Mine is longer... Why...?!?!?!
Got no phone anymore... Please help!:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Under twrp recovery, go to file manager and look for /data/system/locksettings.db and delete the file. reboot.
Just make a backup before deleting it.
fenrir_ac said:
Under twrp recovery, go to file manager and look for /data/system/locksettings.db and delete the file. reboot.
Just make a backup before deleting it.
Click to expand...
Click to collapse
Tried to flash stock official rom via Odin... Bootloop, and no more custom recovery..... SOS !!!!!!!
Prat Guen 22 said:
Tried to flash stock official rom via Odin... Bootloop, and no more custom recovery..... SOS !!!!!!!
Click to expand...
Click to collapse
Use smart switch.At right top corner says '' others'' recovery firmware.