Before when I went to bluetooth and connect to my phone to tether my tablet by bluetooth. I just had to click on my phone in the list of devices and it would automatically would connect. Now I have to go into the device settings and check of internet access.
Is there a way I can set that up as an icon to just click on instead of having to go through 2 or 3 menus to connect to my phone via bluetooth?
Just wondering, if not no big deal.
metalwraith said:
Before when I went to bluetooth and connect to my phone to tether my tablet by bluetooth. I just had to click on my phone in the list of devices and it would automatically would connect. Now I have to go into the device settings and check of internet access.
Is there a way I can set that up as an icon to just click on instead of having to go through 2 or 3 menus to connect to my phone via bluetooth?
Just wondering, if not no big deal.
Click to expand...
Click to collapse
Automatically connect to a BT device (tablet side):
Bluetooth Auto Connect
https://play.google.com/store/apps/details?id=de.refluxa.android.bac
Automatically start BT tether after reboot (phone >=4.0 side):
Bluetooth Auto Tethering
https://play.google.com/store/apps/details?id=de.refluxa.android.bat
I am trying to achieve the following effect and for my life can't figure out how to do it.
Hardware: Samsung Galaxy Watch, Samsung S10+ (unrooted) and My Car with android auto
So the Galaxy Watch should connect to bluetooth when my mobile is connected to wifi, disconnect the watch when the wifi is disconnected so that it is automatically connected to the car when I turn on the ignition. However, if the car is not connected with my mobile in 15 mins, the watch should connect again irrespective of the wifi state.
Basically, i want my phone to connect to my car bluetooth if i am in the car and to the watch if not. I was hoping to use the Wifi connection as a determinator that I am going out if not connected to it.
Satdeep said:
I am trying to achieve the following effect and for my life can't figure out how to do it.
Hardware: Samsung Galaxy Watch, Samsung S10+ (unrooted) and My Car with android auto
So the Galaxy Watch should connect to bluetooth when my mobile is connected to wifi, disconnect the watch when the wifi is disconnected so that it is automatically connected to the car when I turn on the ignition. However, if the car is not connected with my mobile in 15 mins, the watch should connect again irrespective of the wifi state.
Basically, i want my phone to connect to my car bluetooth if i am in the car and to the watch if not. I was hoping to use the Wifi connection as a determinator that I am going out if not connected to it.
Click to expand...
Click to collapse
Super easy...
Create a Profile-> State ->net -> wifi
Give desired settings of your WiFi
Use task Bluetooth connect to watch
Add an exit task to the same profile to connect to car Bluetooth.
However better option is not to use WiFi rather use Bluetooth near state in Tasker .
Hello people, I would like to automate the connection of my cell phone to the HU, the only thing I need to enable on my phone is the Hotspot, is there any way to enable only the Hotsport when I enter my car? Another thing I would like you to do is that every time I turn on the car and the HU goes out of the sleep mode, kill the processes and close all the previously opened app, im on Hal9k rom.
I saw that you can configure the Tasker application to activate the Hotspot when the BT of my car is connected, but I do not want the BT to be activated, I want only the Hotspot to be activated, it occurs to me that every time the HU leaves the mode Asleep, send the task to my cell phone in some way (use the same account as the HU) and activate my Hotspot, is it possible?
In my case, here the sequence :
1. Car BT detected
2. Data ON > Hotspot ON
3. Car BT not connected
4. Hotspot OFF > Data OFF > wifi ON
In details. quoted on XDA
In tasker :
1. New Profile -> State -> Net -> BT Connected
2. New Task -> Plugin -> Toggle Tethering -> Click Config Pencil -> Enable Tether -> Open setting buttons below -> Toggle Allow modify system settings
3. Go back, don't worry about clicking Install app to system and go back again, and back one more time -> Click the play button at the bottom left to test to see if it works. Prosper! (Don't turn tethering off just yet)
4. Go back to profiles, and long press on the Toggle Tethering Enable tether task and click Add Exit Task
5. New Task -> Plugin -> Toggle Tethering -> Click Config Pencil -> Click Disable Tether radio button -> go back 2 times -> click the play button at the bottom left to test to see if tethering has been turned off.
I dont want to use BT, I made it... is not full tested but think its works. With that I turn off BT after hotspot is on and again turn on BT and he dont reconnects more.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado desde mi Pixel 2 XL mediante Tapatalk
Very good thread. By reading it I discovered that I can make my life easier.
I have a new peugeot 3008 with android auto and the next setup :
- my main phone (not rooted) is in my pocket, with bluetooth on, paired with the car. I don't use it for android auto, just for calls and media streaming. When I'm in the car I just keep it in my pocket. When I start the engine it automatically connects to the car's bluetooth.
- my "entertainment" phone - always connected via usb to my car's media unit. It's a rooted phone without any sim inside. I have wireless on all the time, and I make a hotspot from my main phone to have internet on this rooted phone. Being rooted - I've disablet the bluetooth completely, because android auto would have forced the bluetooth connection to my car from this usb connected phone. And I don't want that, I want to connect to the car's bluetooth just with my main phone, from my pocket (because I want to benefit from hands free voice calls from my main phone - where I have my contacts and a sim card, plus other reasons ... the car sends trip statistics after every engine shut down). Off course, on this rooted phone I have installed carstream and aa mirror.
Until now, everytime I entered the car, when I needed internet on my "entertainment" phone I had to reach from my pocket phone and manually activate hotspot, and than, in about 15 seconds my "entertainment" phone automatically connected and all was ok.
After reading this thread I've discovered a little app called "Automate" and I've used it to automate the process of activating hot spot.
So now I don't even need to reach out to my pocket phone ... I just enter the car, start the engine and that's it.
The logic of the flowchart is :
- check if the bluetooth is connected to my car ; if yes - than enable hotspot ; if not - disable hotspot.
The automation is running on my main phone, and I use the fact that when I go into my car - the main phone connects automatically to the car's bluetooth (I off course have to keep bluetooth on all the time on my main phone, but I had it on anyway).
The result is that I start the car (actually the multimedia unit of the car is the trigger) - my main phone auto-connects to car's bluetooth, the automation flow immediately senses that and enables the main phone's hot spot - and than the "entertainment" phone from the car connects to this hot-spot in about 15 seconds or less.
I turn off the car, I'm disconnected from car's bluetooth - and the automation flow senses and auto-disable the hot spot.
Great !
K1kote said:
Hello people, I would like to automate the connection of my cell phone to the HU, the only thing I need to enable on my phone is the Hotspot, is there any way to enable only the Hotsport when I enter my car? Another thing I would like you to do is that every time I turn on the car and the HU goes out of the sleep mode, kill the processes and close all the previously opened app, im on Hal9k rom.
Click to expand...
Click to collapse
I use Carspot http://http://www.carspotwifi.com it automates WiFi hotspot on your mobile when BT connects. Be aware you will need to power your mobile whilst in the car as hotspot consumes considerable power.
I do not keep BT conected because I never im on BT mode on the HU and is uncomfortable go to BT mode each time I have to listen something come from the phone, like an WhatsApp audio. Yes I will like to keep just the phone calls with BT... But even I do not talk much by phone.
Enviado desde mi Pixel 2 XL mediante Tapatalk
i am modifying and rooting used second hand phone as permanent connected phone to my car. it will auto boot and auto off when it detect power on/off from the car.
already work on my modified S4. but unfortunately S4 GPS accuracy not good. so now i am looking for other 2nd hand phone. targeting xiaomi note 3, because of easiness to root.
Sent from my vivo 1723 using Tapatalk
ahhl said:
i am modifying and rooting used second hand phone as permanent connected phone to my car. it will auto boot and auto off when it detect power on/off from the car.
already work on my modified S4. but unfortunately S4 GPS accuracy not good. so now i am looking for other 2nd hand phone. targeting xiaomi note 3, because of easiness to root.
Click to expand...
Click to collapse
I do this with a secondary phone using freedompop. I setup tasker to turn on hotspot when charging and airplane mode when not. Works like a charm.
Very good thread. Automate makes life easier.
Friendly reminder that android supports background scanning since ages, and you can use it if you can't be bothered to keep the whole thing enabled (and yes, automate supports it for example)
Hi,
For years (four) I'm using multiple Apps for this task. And I prefer to use this one: Hot Spot Starter
https://play.google.com/store/apps/details?id=de.thjunge11.autohotspot
It works without root and just for that.
I never see a problem with it in five different smartphones that I used with it.
I hope it helps.
---------- Post added at 11:19 AM ---------- Previous post was at 11:14 AM ----------
marius23mvp said:
- my "entertainment" phone - always connected via usb to my car's media unit...
Click to expand...
Click to collapse
I hope someday AA can work with TWO phones at the same time: one connected via USB and the second via wiresless. More or less this solution will enable WiFi AA with HU supporting only USB (as car manufacturers doesn't like to update the software for free).
Is this working with Android 9 or 10 ?
Just want to say thanks to all the information on here.
I required to have notifications popup on my car stereo older android unit due to my phone's speaker being broken I required to see all my work emails appear as popups on my screen to do this I couldn't find any simple way.
I found 1 tool that does this well my app store is outdated and only offers 3rd party crap I found "Android TV notifier" I gave it a shot and was amazed runs brilliant pushes any specific applications notifications to the server. Which looks great on the screen as you drive.
Problem was every time I got in car I was required to switch on hot spot also if I forgot I got no push notification so these instructions helped make this happen.
Manb there is a simpler way to get mail notifications working on my head unit but my work uses activesync and they tighted the security which stops older devices syncing but the push notifications works great on the head unit. I set it to push outlook messages and WhatsApp and Facebook and text messages
Apps required to make this happen
Android TV notification app ( on phone and also on head unit) (register for small fee)
Tasker (setup as instructed on site)
also some head units have locked startup so I had to locate a decent startup manager for the headunit due to it blocking Android TV notifier from starting.
You can use Bixby routines if you are using samsung phone for auto hotspot
for me I use carplay connected to my car (via iPhone SE 2016) via usb.
Then I use my Samsung phone as hotspot provide connection to iphone SE.
The android auto in my samsung phone is disable.
iPhone SE (Carplay)
1) for Google Maps
2) Waze
3) Navigation
4) iPhone SE stay in car always.Leave it as it will charge when use
Samsung phone
1) spotify via BT to car
2) call
i do not keep BT conected because I am never on BT mode on the HU and it is uncomfortable to go BT mode each time as I have to receive a call or make the call most of the time.
Hey all,
I have developed a new app for Android 11 that will do the bluetooth-enable hotspot feature. You can also set it to enable hotspot if the charger is connected whilst in certain orientations.
let me know what you think.
SpotUp
A simpler way is, create a script in tasker to enable Hotspot. Create an app from this script. (by using tasker factory). Use a button in phone to enable / disable this app by double pressing the button.
So every time you need a Hotspot you just double click the button of the phone.
You don't always need Hotspot to be enabled when you are in car because you will drain battery without reason. This way you easily enable disable Hotspot every time you really need it by just double pressing a button..
oVeRdOsE. said:
In my case, here the sequence :
1. Car BT detected
2. Data ON > Hotspot ON
3. Car BT not connected
4. Hotspot OFF > Data OFF > wifi ON
In details. quoted on XDA
In tasker :
1. New Profile -> State -> Net -> BT Connected
2. New Task -> Plugin -> Toggle Tethering -> Click Config Pencil -> Enable Tether -> Open setting buttons below -> Toggle Allow modify system settings
3. Go back, don't worry about clicking Install app to system and go back again, and back one more time -> Click the play button at the bottom left to test to see if it works. Prosper! (Don't turn tethering off just yet)
4. Go back to profiles, and long press on the Toggle Tethering Enable tether task and click Add Exit Task
5. New Task -> Plugin -> Toggle Tethering -> Click Config Pencil -> Click Disable Tether radio button -> go back 2 times -> click the play button at the bottom left to test to see if tethering has been turned off.
Click to expand...
Click to collapse
Its a few years later, but THANKS! I couldnt figure out how to set it up on Tasker, because I didnt know you can long press for the exit task...
Also it has kinda changed. Its no longer a plugin to turn on/off tethering, but its integrated into the network settings.
oVeRdOsE. said:
In my case, here the sequence :
1. Car BT detected
2. Data ON > Hotspot ON
3. Car BT not connected
4. Hotspot OFF > Data OFF > wifi ON
In details. quoted on XDA
In tasker :
1. New Profile -> State -> Net -> BT Connected
2. New Task -> Plugin -> Toggle Tethering -> Click Config Pencil -> Enable Tether -> Open setting buttons below -> Toggle Allow modify system settings
3. Go back, don't worry about clicking Install app to system and go back again, and back one more time -> Click the play button at the bottom left to test to see if it works. Prosper! (Don't turn tethering off just yet)
4. Go back to profiles, and long press on the Toggle Tethering Enable tether task and click Add Exit Task
5. New Task -> Plugin -> Toggle Tethering -> Click Config Pencil -> Click Disable Tether radio button -> go back 2 times -> click the play button at the bottom left to test to see if tethering has been turned off.
Click to expand...
Click to collapse
Hi there I feel a little silly asking this question but here I go.
I have been using llama for years to turn the hotspot on the phone on when I am in the car. However, I just got a new phone and llama is not available but I have downloaded and paid for tasker and found a project on taskernet "automatic car hotspot" BUT it asks to confirm the device rather than connect automatically. I would appreciate it if you could look at the project and point me in the right direction to get this to work on my new samsung S21.
The phone connects to the car (forester)
If connected > Turns on mobile hotspot
If NOT > Turns off mobile hotspot
I'm using a rooted moto x4 as my "android auto car phone" - that is, I'm leaving it connected via usb in my car for use with android auto. I'm leaving it on all the time so I have instant access to android auto when I start the car. I'm usuing tasker and secure settings to turn off mobile data and put the phone in airplane mode whenever it is disconnected from power to save battery power while the car is parked. Two questions:
1. what other settings can be used in Tasker or Secure settings to save battery power while idle, and
2. I would like to have the battery saving modes work only when the car is at my home, so that if someone steals the phone out of my car while it is parked at a mall or traihead, I might still get some location services and lockphone services. What's the easy way to condition tasks on connection to a particular wifi?
For battery savings... Outside of Batt Saver Mode and Airplane Mode, it's making sure most other apps are not running in the background.
I use Profiles for home/away. More specifically, I use Home Assistant to handle Profiles based on Life360 location. Anyhow, using Profiles and location would work for home. You could use wifi, if it's reliable enough and had a decent range. If using WiFi though, you'll need to omit that radio from the airplane mode.
Sent from my Note8