Q&A for [ROM][4.4.4][AOSP][{Un,}Official] CM11.0 (KitKat)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4][AOSP][{Un,}Official] CM11.0 (KitKat). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Canadian Wireless Providers?
I've noticed that with any of the CM versions (that are over the standard 4.1.2 that Droid 4 officialy supports) my Canadian wireless provider (Fido) doesn't get detected properly and shows up either as an "Unknown Provider" or lists it as Verizon or says no signal when there's 4 bars on it. Any way to fix it so that it says Fido and have me have 3G or data of some kind? I've tried the GSM patch, but that doesn't seem to fix it. Also if I go to scan for wireless signals Fido does not end up getting listed.
ltpliers said:
I've noticed that with any of the CM versions (that are over the standard 4.1.2 that Droid 4 officialy supports) my Canadian wireless provider (Fido) doesn't get detected properly and shows up either as an "Unknown Provider" or lists it as Verizon or says no signal when there's 4 bars on it. Any way to fix it so that it says Fido and have me have 3G or data of some kind? I've tried the GSM patch, but that doesn't seem to fix it. Also if I go to scan for wireless signals Fido does not end up getting listed.
Click to expand...
Click to collapse
Have you done this?
Droid 4 [PATCH][GUIDE]Patch to fully enable GSM on every Rom
http://forum.xda-developers.com/showthread.php?t=2368572
If so may need to add the APN
Sent from my DROIDX using XDA Free mobile app
I've tried the patch and made sure the APNs were in correctly but still my carrier seems to be locked to only Edge when I know for a fact that they support 3G on the standard connections for GSM. In fact, none of the firmwares seem to pickup 3G on the Droid 4 for me for some reason, but atleast with 4.1.2 it will read edge properly and show the correct Fido listed as the network provider. It will find Bell and Telus but not Fido for some reason... Idk, it's been really puzzling because it seems like the phone should inherently support it all because it uses the standard 850MHz and 1900MHz that everything else supports but I'm not getting 3G. So I guess there's two questions I really have answers for.
1. Why does any firmware above 4.1.2 (CM10 & 11 being an example) not read as Fido?
2. Why is the Droid 4 not working on Fido 3G?
Edit: don't know
Fido is a Canadian GSM network, so changing to CDMA will just disable the network. What I need is HSPA(+) & GSM support. Fido supports GSM, UMTS, HSPA and HSPA+ at 850 MHz and 1900 MHz. But for some reason I keep getting locked to EDGE rather than it allowing me to do 3G.
ltpliers said:
Fido is a Canadian GSM network, so changing to CDMA will just disable the network. What I need is HSPA(+) & GSM support. Fido supports GSM, UMTS, HSPA and HSPA+ at 850 MHz and 1900 MHz.
Click to expand...
Click to collapse
Yes, my bad
Sent from my DROIDX using XDA Free mobile app
I'mma see if a different SIM will help. But I'm curious if there are any other Fido customers in the Droid 4 section with the same issue or if they got 3G to work correctly, but I have to sift through millions of pages referencing "Fido" if I search for it so it's a bit of a headache.
battery and gsm
hello guys, the problems have been fixed on battery power? with GSM Italian someone has encountered a problem?
If it does not work
like, "does not work at all", how can I troubleshoot it? ALL my apps including AOSP keyboard (which basically means I cannot enter any text at all) are crashing upong boot. Cleaning caches before and after does not help. Installing older snapshots does not help.
arkenoi said:
like, "does not work at all", how can I troubleshoot it? ALL my apps including AOSP keyboard (which basically means I cannot enter any text at all) are crashing upong boot. Cleaning caches before and after does not help. Installing older snapshots does not help.
Click to expand...
Click to collapse
factory reset in safestrap
What can I do if it keeps crashing my every app?
Literally, every means AOSP keyboard is crashing as well and I cannot enter any text.
Cleaning caches and reverting to older snapshots does not help>
arkenoi said:
Literally, every means AOSP keyboard is crashing as well and I cannot enter any text.
Cleaning caches and reverting to older snapshots does not help>
Click to expand...
Click to collapse
you don't use keyboard to factory reset in safestrap
---------- Post added at 12:22 PM ---------- Previous post was at 12:09 PM ----------
did you verify md5 for rom and gapps with a md5 utility? https://sites.google.com/site/sdshadowscollection/home/hash-checksums
what version of gapps? try PA Gapps http://forum.xda-developers.com/showthread.php?t=2397942
cm 11 nightlies
ive been running the cm 11 nightlies for a long time! but for some reason any nightlies after November 10 create the constant error "unfortunately, the process com.android.phone has stopped". im running in stock slot! tried wiping all data, even flashed back to stock and re-rooted! tried installing to slot 1 and the same issue! so I end up going back to nightly from November 10 2014. im at a loss! don't know if this is a known issue or is there something i need to do to make it stop? running safestrap 3.73 provider Verizon wireless
Destinywlf
downloaded night November 20th! wiped cache, dalvek, and system, fresh flash and gapps! still constantly flashes up the error unfortunately, the process com.android.phone has stopped" back to the nightly from November 10th
cm 11 nightlies follow up!
"cm 11 nightlies
ive been running the cm 11 nightlies for a long time! but for some reason any nightlies after November 10 create the constant error "unfortunately, the process com.android.phone has stopped". im running in stock slot! tried wiping all data, even flashed back to stock and re-rooted! tried installing to slot 1 and the same issue! so I end up going back to nightly from November 10 2014. im at a loss! don't know if this is a known issue or is there something i need to do to make it stop? running safestrap 3.73 provider Verizon wireless
Destinywlf
downloaded night November 20th! wiped cache, dalvek, and system, fresh flash and gapps! still constantly flashes up the error unfortunately, the process com.android.phone has stopped" back to the nightly from November 10th"
Click to expand...
Click to collapse
so tonight I downloaded the November 21rst nightly! same problem! will I decided to download a different gapps package! so far that seems to have fixed my problem. don't know why it didn't do it on cm 11 from November 10th. but so far that seems to have been the problem!
Destinywlf
I have the same problem destinywlf.
---------- Post added at 03:07 PM ---------- Previous post was at 02:19 PM ----------
destinywlf said:
so tonight I downloaded the November 21rst nightly! same problem! will I decided to download a different gapps package! so far that seems to have fixed my problem. don't know why it didn't do it on cm 11 from November 10th. but so far that seems to have been the problem!
Destinywlf
Click to expand...
Click to collapse
Mine still does the same after installing a different gapps apk. Any suggestions?
B Wavy said:
I have the same problem destinywlf.
---------- Post added at 03:07 PM ---------- Previous post was at 02:19 PM ----------
Mine still does the same after installing a different gapps apk. Any suggestions?
Click to expand...
Click to collapse
Why not post file name instead of just writing different.
Sent from my XT907 using Tapatalk
cm 11 nightlies
B Wavy said:
I have the same problem destinywlf.
---------- Post added at 03:07 PM ---------- Previous post was at 02:19 PM ----------
Mine still does the same after installing a different gapps apk. Any suggestions?
Click to expand...
Click to collapse
Im kinda at a loss! i decided to wipe all my data after thinking i found the cause. reinstalled got to the welcome screen and it was doing it again! so i wiped everything again!! reinstalled cm 11 after it installed i reinstalled gapps! and it worked all night and is working today! only thing i did diffrent was not installing both al the same time! im pretty confused at this time! fyi im using the full install of gapps from cynogenmod site i was going to post a link but new members cant post outside links.
cm12
cm 12 works great for me with little modification:
camera not work----------------- use lg camera
video playing not works --------use mx video player with mx codec (arm7 neon)
3g gsm -umts not works ------- patch with "cdma to gsm patch" from mentor
root possible with BETA-SuperSU
finally the clock has a little bug with the day repeating option
cm 11 nightlies follow up!
B Wavy said:
I have the same problem destinywlf.
---------- Post added at 03:07 PM ---------- Previous post was at 02:19 PM ----------
Mine still does the same after installing a different gapps apk. Any suggestions?
Click to expand...
Click to collapse
destinywlf said:
Im kinda at a loss! i decided to wipe all my data after thinking i found the cause. reinstalled got to the welcome screen and it was doing it again! so i wiped everything again!! reinstalled cm 11 after it installed i reinstalled gapps! and it worked all night and is working today! only thing i did diffrent was not installing both al the same time! im pretty confused at this time! fyi im using the full install of gapps from cynogenmod site i was going to post a link but new members cant post outside links.
Click to expand...
Click to collapse
just a follow up! the problem was happening again, so it wasn't the Google apps apparently! but after the nightlies from November 24th and the 25th! the problem has went away! on both the droid 4"s so im thinking they found the problem and fixed it?
Related
Q&A for [ROM][Official Nightly][Android 4.4] CyanogenMod 11.0 for SGS4A (int'l)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
c11 in speaker have mic fail in speaker
Hi I tested cm11 in my s4 active for 2 months; its very stable and fast; but i never used the speaker, but today i put the speaker on and the microphone dont work, i tried make other call, but in speaker the mic dont work. Sorry for my bad english. Thanks
@selebaruc
Preliminary test build here
http://forum.xda-developers.com/showthread.php?p=55841925
selebaruc said:
Hi I tested cm11 in my s4 active for 2 months; its very stable and fast; but i never used the speaker, but today i put the speaker on and the microphone dont work, i tried make other call, but in speaker the mic dont work. Sorry for my bad english. Thanks
Click to expand...
Click to collapse
Seems to be a well known problem at some newer builds of different ROMS.
Correct me if i´m wrong.
Recovery
..
O-T said:
@selebaruc
Preliminary test build here
http://forum.xda-developers.com/showthread.php?p=55841925
Click to expand...
Click to collapse
thanks; the cm-11-20141006 unoficial work!
i have speaker again!
Great work
I run this rom as my "toilet device" right now nightly 10.12.2014
And no problems.
Have not tested phone functionality but it works great with video, web surfing and LTS data and wifi.
An issue I have noticed is excessive power-use when syncing (owncloud). might be related to wifi.
I want this room to reach stable badly. Please tell me if there is anything you need.
daLuiz said:
Hi everyone,
I use CM11 on my phone for a few days now and I love it, I have been waiting for quite some time. I have just two questions:
1: Could you recommend me a recovery to use for the i9295? I am currently using PhilZ Touch 6.57.9 / CWM 6.0.5.1 since it was listed in a german forum (can't link since I am new..) on rooting the phone. However, the path to the sdcard in the recovery is obviously different than what is given in the update-scripts, so the automatic nightly updates do not work and I always have to select the file manually. Also I think I have read that PhilZ announced that he won't be working on the recovery any longer.
So in short: Which custom recovery should I use and where can I find it?
2: Should I update my Baseband? I am currently on the relatively old version I9295XXUAMF5 - Is it worth to update? If so - do I need to flash a full Samsung firmware, or can I get the baseband seperately and flash it with Odin? I was already told that the last Knox-Free version is NE5, so which baseband do you guys use?
Thanks in advance,
daLuiz
Click to expand...
Click to collapse
1: @spegelius has put 6.0.5.0 on his Gdrive. Built Aug 15. Link in OP of CM11 Original Dev. tread. @allram has 6.0.5.1 on his Gdrive. http://forum.xda-developers.com/showpost.php?p=55589413&postcount=871
Both is OK for clean/dirty flash or backup. Both have Reboot = ShutDown. No big deal, just power on after. External SD exfat support is only 6.0.5.1.
2: Baseband ???
After reading some posts and seen the use of baseband = modem, baseband = bootloader and baseband = LTE modem, also aware that System - About... present this as tag for ....? (not sure which of them)
This is certainly a source of confucion and also probably the reason why some experience loss of WiFi when they have done a Odin flash of LTE modem =NON-HLOS.BIN on wrong bootloader (aboot.mbn, sbl1.mbn, sbl2.mbn, ...) version.
It is NOT reccommended to mix 4.2 bootloader and 4.4 LTE modem.
Some collected info and links from here
Please keep in mind that i9295 Active is really similar to i9505 S4 LTE in hardware. Thats why my link in the CM11 thread point to a well visited thread for i9505.
BE AWARE that modem/LTE/bootloader IS NOT interchangeable for the two devices AFAIK.
You _must_ be sure it is for i9295 Active.
If you choose to do it the Odin way with modem.bin, NON-HLOS.bin: first identify your bootloader version in CM Terminal or ADB:
Code:
getprop ro.bootloader
Samsung last 3 letter code naming:
N = year = 2014 (14th letter of alphabet)
E = month of year (May in this case, 5th letter of the alphabet)
x = build # of that month (10th for, "A", as they start 1-9 first, before letters)
NE4 = 2014, May, Build 4 (4.4 KitKat)
NH2 = 2014, Aug, Build 2 (4.4 KitKat)
Generally - if you have working WiFi/GSM/LTE after CM11 flash = no need to fiddle with modems.
The safe way to update is by flashing a complete original Samsung TW ROM for your region/country that has this bootloader-LTEmodem chain setup correctly. When later flashing CM11 nightly, flashing CM11 nightly,... you keep whatever bootloader+GSM modem+LTE modem version you had from first transition to CM11 world. CyanogenMod does'nt touch any of them.
Camera Crashing
Hi All,
anybody else having problems with camera? It's crashing a few seconds after starting camera. Tried 20141019 and 20141016 build. Same Problem. Just tried the google camera from play store. Same problem...
Greets
tommy-77 said:
Hi All,
anybody else having problems with camera? It's crashing a few seconds after starting camera. Tried 20141019 and 20141016 build. Same Problem. Just tried the google camera from play store. Same problem...
Greets
Click to expand...
Click to collapse
1017 & 1018 or older never crash.
System settings - Apps - Camera:
Force stop + Clear data
This will not delete any pictures /video.
CM11 camera version is 2.0.002, Google camera replace CM11 camera and has a higher version.
There are pending updates for CM11 Camera in next nightly. If Clear data doesn't help do you recognize similar issue fixed as listed in cmxlog web page (change log) ?
O-T said:
1017 & 1018 or older never crash.
System settings - Apps - Camera:
Force stop + Clear data
This will not delete any pictures /video.
CM11 camera version is 2.0.002, Google camera replace CM11 camera and has a higher version.
There are pending updates for CM11 Camera in next nightly. If Clear data doesn't help do you recognize similar issue fixed as listed in cmxlog web page (change log) ?
Click to expand...
Click to collapse
Hi and thanks for your help.
I have deinstalled google camera, force stopped camera, cleared data. Still the same problem. When i start camera, the camera opens and starts focusing. During focusing it force closes.
In the changelog of 20141019 there is a similar topic. http://review.cyanogenmod.org/#/c/74734/
And here is the bug report:
java.lang.RuntimeException: Media server died.
at com.android.camera.CameraErrorCallback.onError(CameraErrorCallback.java:33)
at android.hardware.Camera$EventHandler.handleMessage(Camera.java:1017)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loop(Looper.java:136)
at android.os.HandlerThread.run(HandlerThread.java:61)
Does the IR suppose to work? Upgraded from a nightly from may 2014 to the nightly 20141024 last night (without wipe). The saved remote in the app ASmart remote doesn't turn my TV on. Anyway to check if IR is supported?
msm_serial_hs_dma Wakelock when bluetooth is on
Title tells it all.
running CM11 nightly 20141024 and phone wont go into deep sleep as long as bluetooth is on.
Is this normal? known issue?
Does anyone know how to fix this?
-Ole
..
help
daLuiz said:
I observed exactly the same on my phone. Bluetooth on = no deep sleep.
Sent from my GT-I9295 using XDA Free mobile app
Click to expand...
Click to collapse
can somone please tell me how to install custom rom on my sghi537, I tired the stocky rom but it didn't work, Help pls
---------- Post added at 02:13 AM ---------- Previous post was at 02:09 AM ----------
can somone please tell me how to install custom rom on my sghi537, I tired the stocky rom but it didn't work, Help pls
Gaffyboy said:
can somone please tell me how to install custom rom on my sghi537, I tired the stocky rom but it didn't work, Help pls
---------- Post added at 02:13 AM ---------- Previous post was at 02:09 AM ----------
can somone please tell me how to install custom rom on my sghi537, I tired the stocky rom but it didn't work, Help pls
Click to expand...
Click to collapse
Your i537 has AT&T locked bootloader. This is different from the i9295 and topic of this thread. No known CyanogenMod or AOSP option available for the i537.
Try this link http://forum.xda-developers.com/showthread.php?p=7827
... and advice you to use xda forum search or open a thread in Q&A section if no search hit match your next question.
Still an issue on newest release.
mrfoyl said:
Title tells it all.
running CM11 nightly 20141024 and phone wont go into deep sleep as long as bluetooth is on.
Is this normal? known issue?
Does anyone know how to fix this?
-Ole
Click to expand...
Click to collapse
Now running 20141103
This is still my number one issue. Got any ideas?
Does anybody else get a FC when trying to reply/forward to an email in the new Gmail 5.0 (1569867)? The only way I can get it to work is to roll back to Gmail 4.9 (1271612).
Any ideas?
Have flashed CM11 Nightlies only doing cache clean between. Have kept pa_gapps-modular-pico-4.4.4-20140923 in /system along with cm flash. Play Store and Services updated automatically during this.
No issues besides known like man. carrier search.
Along with CM11 1105 I did a /system format and flashed updated pa_gapps-modular-pico-4.4.4-20141103. After that I had slow down speed from Store, below 100kb/s usually over Mb/s.
Repair:
Went to apps and deleted data from Google Services, removed Play update, let Play update (pressed Play - About inside Play) =speed restored
Delete data from Google Services won't remove account or contacts
@Devo7v
You could try the Services trick. I don't know if Gmail has links to it.
Alternatively K9 can handle several accounts including Gmail.
O-T said:
Have flashed CM11 Nightlies only doing cache clean between. Have kept pa_gapps-modular-pico-4.4.4-20140923 in /system along with cm flash. Play Store and Services updated automatically during this.
No issues besides known like man. carrier search.
Along with CM11 1105 I did a /system format and flashed updated pa_gapps-modular-pico-4.4.4-20141103. After that I had slow down speed from Store, below 100kb/s usually over Mb/s.
Repair:
Went to apps and deleted data from Google Services, removed Play update, let Play update (pressed Play - About inside Play) =speed restored
Delete data from Google Services won't remove account or contacts
@Devo7v
You could try the Services trick. I don't know if Gmail has links to it.
Alternatively K9 can handle several accounts including Gmail.
Click to expand...
Click to collapse
I wiped Google Play services, Google Services Framework, and Gmail data, but still Gmail 5.0 FCs whenever I try to reply to an email. I uninstalled Gmail updates and reinstalled Gmail 4.9 and no problems. I think I'm going to convert it to a user app with TiBu and see if that works. If not I guess I'm wiping the phone and starting over.
[Q&A] [BOOT NOW!][CM11] [4.4.4] [GAMING] Aeroi A2 - Speed, beauty, and awesomeness.
Q&A for [BOOT NOW!][CM11] [4.4.4] [GAMING] Aeroi A2 - Speed, beauty, and awesomeness.
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Picture to post after booting correctly or some ROM info:
3G
3G internet is not work
3g internet isn't working;can't import sim contacts....says"empty"
I'll check that out. Any logcats?
Mobile data connection doesn't work
Hi,
I was trying your ROM yesterday and I like your work! It looks like a stable ROM, sometimes fall down camera or when I tried install first time some apps, it completly turned off my Optimus Black. But then was OK. However, I've got one question. What about your mobile data and connection to your mobile provider? When I was using last cyanogenmod 10.1 Nightly update, my settings from Czech T-mobile sets automatically and I was able to connect to Edge, GPRS or 3G. But after install your ROM, I hadn't any setting in APN from provider and when I tried set same settings from CM10.1, nothing happened. I had allow data, but any symbols like E, H or 3G. And browser said: net::err_name_not_resolved. I tried also install all again with wipe data/cache and from zip, but problem is still same.
Do you have any advice how to set-up my APN connection or have you try mobile data connection?
Thank you,
Lukas
SLukin5 said:
Hi,
I was trying your ROM yesterday and I like your work! It looks like a stable ROM, sometimes fall down camera or when I tried install first time some apps, it completly turned off my Optimus Black. But then was OK. However, I've got one question. What about your mobile data and connection to your mobile provider? When I was using last cyanogenmod 10.1 Nightly update, my settings from Czech T-mobile sets automatically and I was able to connect to Edge, GPRS or 3G. But after install your ROM, I hadn't any setting in APN from provider and when I tried set same settings from CM10.1, nothing happened. I had allow data, but any symbols like E, H or 3G. And browser said: net::err_name_not_resolved. I tried also install all again with wipe data/cache and from zip, but problem is still same.
Do you have any advice how to set-up my APN connection or have you try mobile data connection?
Thank you,
Lukas
Click to expand...
Click to collapse
Personally I don't have data on my phone so I can't replicate this. I'll see what I can find in the CM11 sources that *may* solve the issue. Also yes I am investigating an issue that causes certain actions to shut down the phone completely as it happens to me frequently.
Cheers mate.
Hi, i cant seem to find the A2 build, all i see is the CM11 builds. Are the other builds still available?
black screen issue
After I install the firmware(cm11-debug-aeroi-build2) on the phone, run the phone, everything seems fine. But after when the screen is locked, I cannot unlock it , hardware button backlights is on, but there is no picture on the screen. I flash back cm10 , everythings is working normally. so I confirm that' not the hardware problem .
also same problem on Nameless and ParanoidAndroid !
Sorry for my english !
Aeroi A2 camera resolution
I've installed Aeroi A2 on my LG P970. But the camera app can only take 3MP photos. Anyone help me fix this? Thanks!
htlcnn said:
I've installed Aeroi A2 on my LG P970. But the camera app can only take 3MP photos. Anyone help me fix this? Thanks!
Click to expand...
Click to collapse
It happens too in Nameless ROM. Just install another camera app like A Better Camera, for example, you can find it on Google Play.
Thank you for the work you have been doing, but when we have the next version?
Will still continue in the 4.4 (Kitkat) or 5.0 (Lolipop) will start with?
Black Lock Screen of Death
this issue still not fixed...I hope it will be in stable release for 5 days...I am right?
Thanks again, this ROM is very good, but still had a problem, the DATA 3G does not work.
mobile data 2G/3G dont working!
Is not possible to add APNs
schluters said:
Thanks again, this ROM is very good, but still had a problem, the DATA 3G does not work.
Click to expand...
Click to collapse
In my device i can use 3g without a trouble after setting APN.
Sir can you fix google account ? can't sync contact.
radio fm?
hello guys, really nice work, do you see a chance to implement the radio fm? this is actually the only thing that does not work at all, i mean it is not available...
---------- Post added at 02:06 AM ---------- Previous post was at 01:12 AM ----------
hallo, how can i change the 240 dpi density setting to 233(native), like in nameless? that would be a nice feature to add...
Aeroi A2 V3 CM11 4.4.4 STABLE but has camera bugs
Thank you so much for the developer & for your team for your hard work and for trying your best to develop a stable and fastest rom for our old lg p970. However, upon testing I just found out that the front cam is ok but the rear camera have changed from 5MP-3MP. Still, the CAMCORDER's audio and video were not synchronized. I do hope that you can find a solution for this before upgrading to a new OS. Regards & more power to you guys! THANKS! ^^
schluters said:
Thank you for the work you have been doing, but when we have the next version?
Will still continue in the 4.4 (Kitkat) or 5.0 (Lolipop) will start with?
Click to expand...
Click to collapse
I will continue providing updates with 4.4, I'm not sure if 5.0 will happen, just testing.
---------- Post added at 11:22 PM ---------- Previous post was at 11:21 PM ----------
IrishBoy94 said:
this issue still not fixed...I hope it will be in stable release for 5 days...I am right?
Click to expand...
Click to collapse
That's an issue with the hwc that personally only a few have been able to replicate, so please send me a logcat.
---------- Post added at 11:23 PM ---------- Previous post was at 11:22 PM ----------
Fblackid said:
Sir can you fix google account ? can't sync contact.
Click to expand...
Click to collapse
Depends on the Gapps you used. If you used Mentors Gapps, there is no sync adapter in it.
---------- Post added at 11:24 PM ---------- Previous post was at 11:23 PM ----------
taxishop said:
hello guys, really nice work, do you see a chance to implement the radio fm? this is actually the only thing that does not work at all, i mean it is not available...
---------- Post added at 02:06 AM ---------- Previous post was at 01:12 AM ----------
hallo, how can i change the 240 dpi density setting to 233(native), like in nameless? that would be a nice feature to add...
Click to expand...
Click to collapse
Radio Fm will unfortunately never be implemented for various reasons, including the proprietary outdated drivers being one.
There's an app for that on Google Play I believe.
---------- Post added at 11:26 PM ---------- Previous post was at 11:24 PM ----------
*app for dpi
---------- Post added at 11:26 PM ---------- Previous post was at 11:26 PM ----------
neddy1515 said:
Thank you so much for the developer & for your team for your hard work and for trying your best to develop a stable and fastest rom for our old lg p970. However, upon testing I just found out that the front cam is ok but the rear camera have changed from 5MP-3MP. Still, the CAMCORDER's audio and video were not synchronized. I do hope that you can find a solution for this before upgrading to a new OS. Regards & more power to you guys! THANKS! ^^
Click to expand...
Click to collapse
I'll look into the issue.
[Q&A] [ROM][LRX22C][5.0.1][10 Jan 2015]xTraSmooth 1.0 xTreMe Battery From Nexus 5 Wi
Q&A for [ROM][LRX22C][5.0.1][10 Jan 2015]xTraSmooth 1.0 xTreMe Battery From Nexus 5 With Love
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][LRX22C][5.0.1][10 Jan 2015]xTraSmooth 1.0 xTreMe Battery From Nexus 5 With Love. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Downloading problem?!!!!
the link does not work whenever i click on download it says it doen't exist...
Worked thanks a lot!!!
I flashed 1.0 first and then i configured my phone. i was able to connect it to Wifi. once i configured my phone i went to recovery and flashed delta zip and then flashed update downloaded from the app. then i flashed supersu. reboot it and it worked..
Just a sec
i tried downloading and applying this rom to my nexus 6 thru the app but just gets stuck at just wait a sec. if you guys can help me out that would be great.
Will not flash
I'm coming from cleanrom on a full wipe. When I flash ANY version of this it says "www.scottsroms.com" above it, as if I were flashing the cleanrom and then gives me an error.
Is there any way to switch back to default screen resolution ?
Nexus 6
I ran the 1.2 from the folder earlier today and still had the same install error coming from 1.0. But the system boots and is 100% working. Great Rom.
Verizon support
Hello
Installed the Rom, got no connection to Verizon (either CDMA or LTE). Any known issues with that or had the ability to test?
Thanks
Brandon
Nexus 6
Hi! I wanted to know some things about this ROM before flash it...
Can I play games such as Modern Combat 5 or any other high graphic game withouth any kind of lagg?
The battery is better than stock one?
Sound is better than stock?
If I'm decrypted and I flash this ROM... I'm gonna stay decrypted?
Thank you in advance!
Im trying to get the updater app premium, but its nowhere to be found, it has been pulled from the store?
Can you turn off lock screen rotation and double tap to wake? Or is there a file I can edit to turn them off? (I hope I can get an answer. I never find Q&A gets any visits from the developers).
amwbt said:
Can you turn off lock screen rotation and double tap to wake? Or is there a file I can edit to turn them off? (I hope I can get an answer. I never find Q&A gets any visits from the developers).
Click to expand...
Click to collapse
Go to your build.prop
Scroll all the way to the bottom and change lock screen rotation override to false, reboot and profit. I did this with root browser from the play store
Sorry for asked, is this room stable as chroma is just for knowing if a change because I love m preview and this room looks much better. and I use chroma because is stable and great room to.
Possible to change the theme
hai i m new for this ROM. It Possible to change the theme for this rom. Like (Chroma )
By far best stock ROM ever Exelent Develoment my friend.
Yes with layers manager!!!
Problem In VIdeo Recording
video recording in google camera not working on my nexus 6
as well as tango video chat is also not working
help pls...????
---------- Post added at 10:54 AM ---------- Previous post was at 10:49 AM ----------
video recording in google camera not working on my nexus 6
as well as tango video chat is also not working
help pls...????
[ROM][MPZ44Q][21.06.2015]xTraSmooth Odex xTreMe Battery You Will Love It
Why is only 3 cores working on this rom? I have the latest build.
after flashing i stuck on setup ,everytime asking me my google account for verification followed by password and again goes to mail verification.need help.
---------- Post added at 04:32 PM ---------- Previous post was at 04:27 PM ----------
after flashing i stuck on setup ,everytime asking me my google account for verification followed by password and again goes to mail verification.need help
Tap and Pay Issues
Is tap and pay broken with this ROM for anyone else or just for me? NFC terminals just not recognizing my phone at all.
Can't edit build.prop
I cant seem to figure out how to edit the build.prop nothing will save all the apps like es file explorer say error any ideas why on this rom it wont let me save?
---------- Post added at 08:36 PM ---------- Previous post was at 08:31 PM ----------
nystyletaco said:
Is tap and pay broken with this ROM for anyone else or just for me? NFC terminals just not recognizing my phone at all.
Click to expand...
Click to collapse
This is enabled by google it will be available in the final build this is just the preview... probably in setember october this will work
Simply put I will host two posts, one for the US variants and the other for N910G.
I'm attempting to fix the data issues and booting issues that occur when trying to boot the ROMs.
If you want other people to use this fix simply link them to this thread.
This is an attempt and by no means does it entail that it will work, this is an experiment.
The kernels provided are not created by me and all credits are due to the developers who created them.
The US variant kernel used is created by @freeza and I thank him for creating it.
US variants
Follow these instructions carefully and do not skip steps.
Update to the latest stock 5.1.1 firmware for your device.
N910V:
DataFix
Multisystem Kernel by @hsbadr
Other US users please download and flash :
Kernel 1
Or if the first one doesn't work.
Kernel 2
(Both kernels created by @freeza)
Stock 5.1.1 N910F ROMs:
Based on COI3:
Data Fix
Based on COJ3:
Data Fix
Note5 Ports: (These should work with stock based ROMs as well.
N910W8:
Data Fix
N910T/T3:
DataFix 1
Data Fix 2
N910P: (4G Doesn't seem to work?).
Data Fix 1
Data Fix 2
Flash DataFix 2 then DataFix 1.
I would advise a clean install, this in an experiment to see if it fixes issues, so make a back-up.
Move the files to your internal storage.
Make a back-up of your current ROM.
Wipe /system /data /cache /DalvikCache /AndroidSecure
Flash the ROM.zip
Flash the Kernel.zip
Flash the DataFix.zip
Reboot.
Please report back.
If you want other people to use this fix simply link them to this thread.
The kernel can be shared.
N910G
Follow these instructions carefully and do not skip steps.
Update to the latest stock 5.1.1 firmware or the ROM's matching firmware version for your device.
Download the ROM.zip and then Dr.Ketan_L10 kernel
[Thanks to @dr.ketan for the kernel and thanks to @MBariya for testing it out] This kernel only works with COH4 modem and bootloader.
OR install Nameless Kernel.
Thanks to Nameless Team, Er.Aditya, Crimsonthunder and Senthil360.
Move the files to your internal storage.
Make a back-up of your current ROM.
Wipe /system /data /cache /DalvikCache /AndroidSecure
Flash the ROM.zip
Flash the Kernel.zip
Reboot.
3
For luck
I'll be right back ?
found two bugs after flashing the kernel and datafix you proposed in the other thread. It doesn't display my carrier name anymore, on the homescreen only, lock screen still shows Rogers, which is not big deal but i get a connection and can make calls just fine. I also get a message saying my places stopped working whatever that is.... No freezes so far!
I'm on W8 which i heard is the same HW as 910T.
angeluszero said:
found two bugs after flashing the kernel and datafix you proposed in the other thread. It doesn't display my carrier name anymore, on the homescreen only, lock screen still shows Rogers, which is not big deal but i get a connection and can make calls just fine. I also get a message saying my places stopped working whatever that is.... No freezes so far!
I'm on W8 which i heard is the same HW as 910T.
Click to expand...
Click to collapse
You can remove that app, it's Samsung Bloat.
Battlehero said:
You can remove that app, it's Samsung Bloat.
Click to expand...
Click to collapse
how do i remove it? what does it do?
angeluszero said:
how do i remove it? what does it do?
Click to expand...
Click to collapse
Download a root explorer app
navigate to:
/system/priv-app
Delete 'MyPlaces_Noble'
Reboot.
It's a widget as far I remember, nothing feature breaking.
Everything is working phenomal here on 910T3. No lag on sleep, data connectivity right away, running cool and smooth. Thanks for the hard work.View attachment 3505582View attachment 3505583View attachment 3505584
Sent from my SM-N920C using Tapatalk
denson9874 said:
Everything is working phenomal here on 910T3. No lag on sleep, data connectivity right away, running cool and smooth. Thanks for the hard work.View attachment 3505582View attachment 3505583View attachment 3505584
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
You are welcome I think the bigger task seems to be N910G, though I had expected the opposite :laugh:
Not good phone froze during a call. I flashed back the first firmware, waiting to see if that works. I used the data fix that's labeled note 5 port for w8-T. So far the UI is OK. I'm curious to know if it's the kernel or the data fix that makes itfreeze
angeluszero said:
Not good phone froze during a call. I flashed back the first firmware, waiting to see if that works. I used the data fix that's labeled note 5 port for w8-T. So far the UI is OK. I'm curious to know if it's the kernel or the data fix that makes itfreeze
Click to expand...
Click to collapse
What device are you running?
W8. Canadian.
---------- Post added at 03:26 PM ---------- Previous post was at 03:19 PM ----------
Is the kernel necessary to get network or is it just the datafix? If I flash the rom again and the datafix only would it work?
Battlehero said:
You are welcome I think the bigger task seems to be N910G, though I had expected the opposite [emoji23]
Click to expand...
Click to collapse
Lol I would imagine the same as well. In most cases the US variants normally have quit the problematic experience but it seems to be the contrary atm. Hope the fix needed for N910G is figured out because this Rom should be enjoyed by all interested. I have a question though. Kyubi Bloatware edition is no longer supported by their developer, is that a precursor to the unbloated variant as well? Sorry in advance if there is no correlation between the two.
Sent from my SM-N920C using Tapatalk
denson9874 said:
Lol I would imagine the same as well. In most cases the US variants normally have quit the problematic experience but it seems to be the contrary atm. Hope the fix needed for N910G is figured out because this Rom should be enjoyed by all interested. I have a question though. Kyubi Bloatware edition is no longer supported by their developer, is that a precursor to the unbloated variant as well? Sorry in advance if there is no correlation between the two.
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
We will have to see what happens, I can't guarantee anything regarding the ROM yet.
angeluszero said:
W8. Canadian.
---------- Post added at 03:26 PM ---------- Previous post was at 03:19 PM ----------
Is the kernel necessary to get network or is it just the datafix? If I flash the rom again and the datafix only would it work?
Click to expand...
Click to collapse
What kernel are you using with the 'working' setup?
Deleted
First issue so far. It states it's disabled but I have no disabled apps on my setup
View attachment 3505618
Sent from my SM-N920C using Tapatalk
denson9874 said:
First issue so far. It states it's disabled but I have no disabled apps on my setup
View attachment 3505618
Sent from my SM-N920C using Tapatalk
Click to expand...
Click to collapse
Did you flash any other mod?
Just saw this on the xda front page, thought I'd post it here:
https://www.xda-developers.com/lineageos-15-1-supports-a-b-devices-moto-z2-force/
Sent from my Moto Z (2) using Tapatalk
Yes. Also: erfan has almost completely got treble working for our device. Twrp had an overhaul as well
@Uzephi do you have downloads for twrp?
this is great news i was playing with the vendor partition on these phone and was not able to get the gsi to load until i started modding the version of twrp i was running with red wolf recovery additions. it booted but was not usable as the device did not like something in my work around and gave up on it i was just going to wait for the Z3 but now i think this phone will stay in my pocket even longer.
cervantesjc said:
@Uzephi do you have downloads for twrp?
Click to expand...
Click to collapse
Check erfanoabdi's AFH. All his experimental releases are there. There is a treble one (a bunch of stuff broken, on back burner for now) and one that supports password decryption. Cannot flash current builds with it though.
Edit: warning. Experimental means no support and most likely things are broken, like flashing ROMs explained for the test twrp. It does decrypt 8.1 ROMs correctly though
Looks like an experimental build has been posted.
https://download.lineageos.org/nash
nightly 15.1
https://download.lineageos.org/nash
...
if I flash these roms I will not have problems with the imei when returning to stock?
---------- Post added at 06:13 PM ---------- Previous post was at 06:08 PM ----------
Is this rom better than the stock? because the stock is incredible and it works perfectly for me. I'm only interested in installing this rom since it's the only way I can get rid of the bloatware and make it work in sprint.
EddiePR said:
if I flash these roms I will not have problems with the imei when returning to stock?
---------- Post added at 06:13 PM ---------- Previous post was at 06:08 PM ----------
Is this rom better than the stock? because the stock is incredible and it works perfectly for me. I'm only interested in installing this rom since it's the only way I can get rid of the bloatware and make it work in sprint.
Click to expand...
Click to collapse
I've been using LOS for quite a bit now, and it's great, and to answer your question, YES, it is better than stock, battery life is better, smooth and responsive, the only drawback for some people, is that audio motomods don't work on the ROM and probably never will, but highly recommended if you want a clean android experience.
cervantesjc said:
I've been using LOS for quite a bit now, and it's great, and to answer your question, YES, it is better than stock, battery life is better, smooth and responsive, the only drawback for some people, is that audio motomods don't work on the ROM and probably never will, but highly recommended if you want a clean android experience.
Click to expand...
Click to collapse
I would not be so pessimistic on that. There's a small but possible chance, once they force the Treble on, that someone else may be able to figure out the Audio Motomods.
Flashed Nightly 15.1 following steps in their official website and ended up with a brick....But I found a blankflash through port 9008 to recover.
It`s possible that I missed the fastboot -w step.
Unseeablething said:
I would not be so pessimistic on that. There's a small but possible chance, once they force the Treble on, that someone else may be able to figure out the Audio Motomods.
Click to expand...
Click to collapse
Unless motorola releases the audio drivers for their motomods, I find it kinda impossible, because it seems that those drivers are closed source, treble will help with future development but I really doubt we'll see audio mods working.
I was using the last nightly until yesterday when I found out that the microphone on video calls was not working, so I had to come back to stock.
Is this the newest update?? i'm still on June 18th. i usually get notified on my phone but for some reason not getting any and when i check for updates it fails????
HugeUFO said:
Flashed Nightly 15.1 following steps in their official website and ended up with a brick....But I found a blankflash through port 9008 to recover.
It`s possible that I missed the fastboot -w step.
Click to expand...
Click to collapse
Me too, but I got it working following other AOSP installs.
Flashall
Bootloader and then Fastboot into TWRP
Wipe Cache, Data, System
Install to A
Install to B
Reboot to Bootloader, run the fastboot -w
(optional) Fastboot into TWRP, Install GAPPs
(optional Magisk)
Boot into the system, do not add your accounts or anything.
Skip past everything, only selecting the reporting and bug logs you want on.
Boot back into the Bootloader, and fastboot TWRP
Install Magisk, and preferably go to Magisk Manager and Magiskhide Google Play Store and Google Framework Services before adding accounts.
---------- Post added at 11:09 AM ---------- Previous post was at 11:07 AM ----------
blake .l said:
Is this the newest update?? i'm still on June 18th. i usually get notified on my phone but for some reason not getting any and when i check for updates it fails????
Click to expand...
Click to collapse
Well, that might've been an experiment release? I know the July 3rd one is a nightly.
Anyone able to get volte working on the latest nightly (20180703)?