Q&A for [KERNEL][4.4.4][.283] HodorKernel [27/09/2014]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][4.4.4][.283] HodorKernel [27/09/2014]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
recovery confusion
I have been using hodor kernel with criskelo's 7.2 (4.4.4 _ .283) rom ... according to op hodor kernel comes with twrp 2.8 . Bt when I try to enter into the recover it always brings me to philz cwm recovery. I have tried different key combination during boot bt always cwm recovery.I want to know why and how can I use twrp.
What is the difference between hodor and anyhodor version?? <br />
Sory for the stupid question but I don't know?
Thanks for only updated kernel for Xperia Z...U are Awsome!!!
---------- Post added at 10:27 PM ---------- Previous post was at 10:12 PM ----------
ahmadzxc said:
What is the difference between hodor and anyhodor version?? <br />
Sory for the stupid question but I don't know?
Click to expand...
Click to collapse
Anyhoderkernel is for existing hodorkernel users..If u are new u have to install hoderkernel.zip
Any chances of GPU overclocking as well?
Hi Olivier,
Is there any chance of you adding the GPU overclocking capabilities into Hodor Kernel for Xperia Z .292?
BY the way, loving all the stable existing functions, no audio stutter, no lag, no hang for a week,
well I'm a heavy gamer on Dead TRigger 2, still little choppy with medium graphic settings... hehehe, would be perfect if the GPU speed can go higher
charging problem
hi i am using existenz ultimate 3.0 and hodarkernal i switched on the fast charge mode and it was working for 2 days and after that i am not getting any charging from any devices ..........it pluged in the red light is on for charging i plunged it in for 2 hours and it only got one percent of charge i just wanna ask is it because of the kernel or its a hardware problem.......?
Hi. this kernel is best
please put gamma setting feature in this kernel. i really want it
Thank U
Can I flash this with locked bootloader
Is this kernel compatible with Ultra Stamina?
i want to go back in stock kernel? how to do it? need help asap plss thanks
thanks OP! waitting HodorkernelLollipop ....
is this able for LB devices?
please port this kernel for lollipop
rezash2 said:
please port this kernel for lollipop
Click to expand...
Click to collapse
I hope he will release it soon as there's an experimental kernel in his build server.
Related
Q&A for [KERNEL] [CM11.0] [OMNI] Boeffla 2.4-beta4 <21-08-2014>
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL] [CM11.0] [OMNI] Boeffla 2.4-beta4 <21-08-2014>. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
questions
Does it work on it 30th s5 elite roms?
No idea, for real. Someone who tried it may tell.
Flashed it on my Samsung Galaxy SIII running C11-nightly for 11/11/2014, bricked my phone :/ Just a warning to others. No download mode/recovery either.
Bug Report
MDNIE mode and scenario settings are reset every reboot. Sharpness tweak and MDNIE overwrite works fine though.
Using NamelessRom 20150103 and Boeffla Kernel 3.0 alpha 6a.
Edit: Nevermind, ROM-related bug
hi
I'm uploading newest kernel i'll modify the post when complete
---------- Post added at 07:57 PM ---------- Previous post was at 07:51 PM ----------
https://mega.co.nz/#!y5QBSArJ!SR52zHDUTYUuReBegQ7Ze50cOeCSE3TjnkPqf6Oz6m8 there is the latest cm 11 kernel
I've been using this for a while now, very customizable.
Cheers for that!
Is the Boeffla 3.0 alpha 9 working fine with RR??
It is supposed to work on any ROM based on CM12.0 but I haven't tested with RR, only NamelessRom...
I started using with RR, no problems so far.
Just wondering if anybody else has the issue with this kernel not being able to read CPU temp? I am able to with stock kernels and omni but not this one? Or am I doing something wrong lol
Deepsleep working after close the google play services
this kernel here "Boeffla-kernel-4.0-alpha2-CM12.1-NG-i9300-u600-2015-04-20-115533"
is best, beast mega power fu*king in i9300
ai tested in [ROM][I9300][5.1.1] Temasek's UNOFFICIAL CyanogenMod 12.1 (yes the new 5.1.1) all apps open very very fast
transformed the S3 fully
let's all join and ask version of the rom and kernel cited for i9305
and make a donation via paypal for guys who merit the good work
Excuse my English
links
http://forum.xda-developers.com/galaxy-s3/help-i9305/qa-boeffla-kernel-linaro-zzmoove-t3051361#post60287061
http://forum.xda-developers.com/galaxy-s3/development/rom-temasek-s-unofficial-cyanogenmod-12-t3086689
Q&A for [kernel] F_kernel 4.4.x ROMs NO F2FS
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [kernel] F_kernel 4.4.x ROMs NO F2FS. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hi Fred,
only one information for you. Your kernel 1.2.3 work great with 1200 MHz and SlimKat. Please don't stop development! There are any people who are using SlimKat and Oc-Kernel! And only with your kernel bluetooth work.
Greetings from Germany
K.
Thanks
hi Fred,
thank you for your kernel.
so far so good for me.
CyanogenMod S3 Mini by NovaFusion with F_Kernel 1.2.3 (I'm looking for the swap feature)
EDIT: USB tether not working. and can't connect device to PC as mass storage (only charging).
_Kosmas_ said:
Hi Fred,
only one information for you. Your kernel 1.2.3 work great with 1200 MHz and SlimKat. Please don't stop development! There are any people who are using SlimKat and Oc-Kernel! And only with your kernel bluetooth work.
Greetings from Germany
K.
Click to expand...
Click to collapse
hello,
I do not intend to stop development but version 1.2.3 works good
I just make a 1.2.4 version with just added patch Lockscreennotification and golden-guys RTC kernel changes
Arusar said:
hi Fred,
thank you for your kernel.
so far so good for me.
CyanogenMod S3 Mini by NovaFusion with F_Kernel 1.2.3 (I'm looking for the swap feature)
EDIT: USB tether not working. and can't connect device to PC as mass storage (only charging).
Click to expand...
Click to collapse
Thank you for report,
the swap not work apparently since v1.2. In 1.1 is ok
However, I currently do not know what is the cause of this problem.
For USB tether, work on OmniRom and work probably on slimkat (by android-andy) because the basic kernel is by OlivierG96 in these two ROMs
in CyanogenMod and other ROM the base of kernel is by Novafusion and not work exactly same, So is this can be the cause of these disorders.
Fred6681 said:
hello,
Thank you for report,
the swap not work apparently since v1.2. In 1.1 is ok
However, I currently do not know what is the cause of this problem.
For USB tether, work on OmniRom and work probably on slimkat (by android-andy) because the basic kernel is by OlivierG96 in these two ROMs
in CyanogenMod and other ROM the base of kernel is by Novafusion and not work exactly same, So is this can be the cause of these disorders.
Click to expand...
Click to collapse
thanks for your response Fred
now I will try the v1.1 on CM11 NovaFusion
Hello Fred6681,
it´s possible for you to integrate the zzmoove governor in your kernel? This governor brings a lot of possibilities to save battery and have enough performance :good:. It would be a great thing for this people who need working bluetooth and used a not based ROM by NovaFusion.
Greetings and maybe thanks in advanced!
K.
_Kosmas_ said:
Hello Fred6681,
it´s possible for you to integrate the zzmoove governor in your kernel? This governor brings a lot of possibilities to save battery and have enough performance :good:. It would be a great thing for this people who need working bluetooth and used a not based ROM by NovaFusion.
Greetings and maybe thanks in advanced!
K.
Click to expand...
Click to collapse
I made , I would put has arrangement in the evening
Changelog
Thanks a lot :good:. Just download and will report
Greetings K.
Edit: I had a reboot while screen off . I will try screen off settings 200-500 MHz.
Very good job
l8190 with vanir 4.4.4 from 24.11. works perfect. 1A I like it. It works with min. 100 and max 800 perfect
greetings
update I use the zzmove with deadline on 100 and 700 Mhz. It works now almost 23 hours and save a lot of battery. Very good job. I like your kernel
GOOD job
Nice Kernel!! but i only can reach 1150Mhz hope you guys can Do some changes in voltage
Nice kernal...
galaxy i8190l problem rom
hopefully someone can help me! I am new to this and want to copy the rom gt- i8190l a phone to another. but do not know how I can do it correctly when loading the rom because I want to replace the cell does not link the change of company . . . . ie I get all logos telcel but ask me pin because the other was Iusacel
anyone can help me correct my mistake ?
I cant install NovaThor Settings! Always get the message "Aplication not instaled"
Anyone can help me with this?
Flashing Kernel
I cant install NovaThor Settings.apk, it always says aplication not installed.
I've already flashed the kernel. Anyone can help with this please?
i dont know why but everytime i install this kernel on cm11 cm12 PA CARBON im gettinh system bootup and after android is upgradin it laod up page that encryption failed reset and after resteting phone error continues
A newbie question. Must perform the wipe before flash this kernel? Use last update of SlimKat
I don't think we have to wipe /data or /system partition, but I do wipe cache and dalvik, in every flash thru recovery. But as usual, u can check thread about flashing custom kernel.
Edited: sorry I forgot to quote, and double post.
Problem
Hi I want to know why not let me install this kernel 1.3 on my rom in my little SlimKat 0.9. I must make corresponding wipes? Try without wipe and will not let me install this kernel.Alguien could give me a help?
dm1980 said:
Hi I want to know why not let me install this kernel 1.3 on my rom in my little SlimKat 0.9. I must make corresponding wipes? Try without wipe and will not let me install this kernel.Alguien could give me a help?
Click to expand...
Click to collapse
I don't think we have to wipe /data or /system partition, but I do wipe cache and dalvik, in every flash thru recovery. But as usual, u can check thread about flashing custom kernel.
i8190n SlimKat9.0(Android-Andi)
Fred'sKernel1.3(Fred6681) SuperSU2.46(ChainFire)
Naimlaaa said:
I don't think we have to wipe /data or /system partition, but I do wipe cache and dalvik, in every flash thru recovery. But as usual, u can check thread about flashing custom kernel.
Click to expand...
Click to collapse
ok now I will try as you say me. Thank You
---------- Post added at 02:51 PM ---------- Previous post was at 02:46 PM ----------
Naimlaaa said:
I don't think we have to wipe /data or /system partition, but I do wipe cache and dalvik, in every flash thru recovery. But as usual, u can check thread about flashing custom kernel.
i8190n SlimKat9.0(Android-Andi)
Fred'sKernel1.3(Fred6681) SuperSU2.46(ChainFire)
Click to expand...
Click to collapse
It differs from the mobile version? I have gt-i8190l
gacias for the help
Q&A for [KERNEL][SP] DooMKernel (v13)[20140604]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][SP] DooMKernel (v13)[20140604]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
DoomKernel Rocks works perfectly with pac rom latest version
I thought doom kernel wont run on my pac rom :rolleyes but now i'm happpy and excited with this kernel and please give me some tips to make best use of this kernel .I have switched to art from dalvik...
Is development stopped?
Sent from my C5303 using XDA Free mobile app
Swap enable or not
Hi,
I m using cm11s rom in xperia sp .I want to increase my ram by using external sd card .so i need a swap enable kernal to acheive this.Is this kernal has swap enable feature...thanks..
tictumesh said:
Hi,
I m using cm11s rom in xperia sp .I want to increase my ram by using external sd card .so i need a swap enable kernal to acheive this.Is this kernal has swap enable feature...thanks..
Click to expand...
Click to collapse
this wouldn't help, external SD card are too slow compared to ram, you will just slow your phone...
security recommendation
hello,
first of all thanks for creating this kernel and providing updates
just wanted to recommend you a thing .. related to security..
generally when some one looses his phone or someones phone gets robbed, the person who steels it shuts the phone reboots in recovery and deletes the data and formats the phone..
so i was wondering if you could set some password kinda thing for your doomkernel, so while booting in recovery each time it would rather ask for password..
this will make next level security,,
hope you got to know what i mean.
thanks again and god bless for creating DOOMKERNEL ...........
and one more when are you getting dual boot kernel for xperia sp
suggestion
Hi,
please create dual boot kernel for xperia sp and also set password while entering in clock work mode.. you'll create flagship ..as every guy who steels our android phones they hardboot in clock work and format data ..
do it you;ll rockkkkkkk
or run on the external wifi card on this kernel ? who has try?
Overclock!
Im with the Xperia Performance Ultra by Marilia ROM, and this v13 kernel
i install the SetCPU but the max i can put in CPU is 1728, what i have to do to overclock this??
Thanks!
[Help] My Xperia SP C5302 won't turn on after Flashing DooMKernel v13
I had Stock 4.3 Rom...
Rooted and installed Custom Recovery on this cell phone using http://forum.xda-developers.com/xperia-sp/development/xperiasp-locked-bootloader-lbl-t2947194
After Flashing DooMKernel V13 using CWM Recovery, I Rebooted the cell phone and it refused to turn on...Plz help me out
This kernel is discontinued?
Rollback
HI All,
Im using this kernel and its satisfying..
but i want to sell this phone and i have to make it like original ROm
can anyone here help me how to roll back this kernel to firmware?
thanks a lot!
Compatibility
Will it work on a Custom Rom or to be precise Will it work On Cm12.1 Running Android Lollipop 5.1...Plz Help??? Sorry For Asking Such Stupid Questions But Dont Wanna GEt in to Another BootLoop And If can install it then will it Hamper The Wifi and Data Connectivity??
Q&A for [Rom] Jellybean for Droid
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Rom] Jellybean for Droid. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
File Manager?
kfazz said:
Have fun, and format /system before flashing!
added camera app, fm radio, media_codecs.xml (fixes sound probs)
http://www.mediafire.com/file/rm3t3813wwxaewd/cm-10-20120826-UNOFFICIAL-sholes.zip
bootloops? ts problems?
did you format system?
try safe kernel (stockish ram/sgx/dsp timings)
http://www.mediafire.com/file/0kci9mvja4b9ssn/jb_safe_kernel.zip
or safer kernel (doesn't reprogram core clock at boot, exact stock timings)
http://www.mediafire.com/?do6yfe1c79v7xj7
or safest (same as safer with cpu max at 800mhz instead of 1000)
http://www.mediafire.com/file/926lgj8qu2a8l8s/jb_safest_kernel.zip
still no go?
try ics build here:
http://forum.xda-developers.com/showpost.php?p=29471613&postcount=1855
with 160mhz kernel
then wipe everything and try this build again, or enjoy ics :]
if you get stuck without touchscreen don't sbf back to stock
try safe kernel and ics build, if you still have troubles pm me
Gapps: http://www.mediafire.com/file/6gm3mm7iyi775n6/gapps-jb-20120726-minimal-datainstall.zip
broken: lots? please test
greets and credit: nadlabak, quarx2k, tpruvot, mbm, everybody at #motomagic, et cetera
Click to expand...
Click to collapse
Does this ROM come with a file manager? I've looked through the app drawer, the install zip's and this tread and can't find anything. Am I missing something or was it forgotten?
Q&A for [KERNEL][GCC5.1][TA-MOD] Xcelerate™ [LP][Synapse][Updated:07/06]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][GCC5.1][TA-MOD] Xcelerate™ [LP][Synapse][Updated:07/06]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Wow... Nice...
BTW.. Happy Birthday Bro...
Anyone tried with the aicp????
AOSP by ivan
So not works on lollipop aosp by ivan?
what should i set the kernel to - on demand, interactive or power save?
fahd47 said:
what should i set the kernel to - on demand, interactive or power save?
Click to expand...
Click to collapse
Do not use powersave.
On demand - less responsive, saves more power.
Interactive-more responsive, uses more power.
In relative terms only.
Use the one you like.
For More info Google it.
vibration intensity
just flashed
i'm using xenon hd last build and wifi work
for vibration issue , i'm using "faux123" and you can change the vibration intensity
bad: must buy the app
thanks dev
xiaomi mi4
Hi there,
i know it's very explicit on the thread, it says for xiaomi mi3, but since i'm new here and I've seen so many roms for xiaomi mi3 that works on the mi4 i wonder... Does this kernel works on mi4?
Thanks in advance
becosta83 said:
Hi there,
i know it's very explicit on the thread, it says for xiaomi mi3, but since i'm new here and I've seen so many roms for xiaomi mi3 that works on the mi4 i wonder... Does this kernel works on mi4?
Thanks in advance
Click to expand...
Click to collapse
Yes this works on mi4....!!!
Double tap to wake
I think this might look like I am demanding but I need it badly as the cover which I use its very difficult to reach power button . so if u could as this feature in any experimental build .please it's a sincere request .
PS: Belated happy b'day
where is download link ?
Using Mokee ROM, i have a VERY SLOW charging 4-5 hours from 20% to 100% .Is it due to ROM or Kernel? In MIUI ROM i had like 2- 2.5 hours charging time.
i got no signal after flashing this one. i forgot that this is not compatible for aosp roms. am i right?
manci said:
Using Mokee ROM, i have a VERY SLOW charging 4-5 hours from 20% to 100% .Is it due to ROM or Kernel? In MIUI ROM i had like 2- 2.5 hours charging time.
Click to expand...
Click to collapse
try stock kernel & see if you have same charging time
error while installing the zip!!
when i try to install the zip in cwm (r11) it is giving me error : "e:footer is wrong signature verification failed"
i am currently on mokee rom nightly (19 jul build).
thanks
sir where is the download link . please i want to try this kernel, salamat
Zshinchan12 said:
sir where is the download link . please i want to try this kernel, salamat
Click to expand...
Click to collapse
Bhai use this
Though it's a really awesome kernel,WiFi is not working on Ivan's aosp!!! Could you fix it please?
This is no doubt a great kernel. Best battery life ever.. I am waiting for the update eagerly.. I don't know if it's early of me to ask but still i am very curious.. What's the ETA to release the new kernel for xiaomi Mi3?
When u ll release xc v2