Hey everybody. i've been running null rom 23 (or whatever the last one f0mey released was) for quite a while, and using an outdated gear manager because i was unable to connect on a newer manager. since the method to revert to android became available and i got a galaxy note 4, i want to update it to the newest stock tizen, then try tizenmod. however, i am having some serious driver problems. i managed to flash to stock android and now, unfortunately, my computer will no longer recognize the device in download mode. i have tried different ports and cables, rebooting the watch, rebooting the pc, manually switching the driver in device manager (which is successful but says the device could not start). i've uninstalled the drivers and reinstalled them, nothing has helped. any advice?
Related
Hey guys,
I'm on a rooted ROM right now that appears to be corrupt in some way as I don't have USB effectively working at all. All of the ROM load instructions that I have found require the new ROMs to be loaded through Heimdall or Odin, neither of which recognize my Tab turned on normally or in download mode.
When I connect my tab to my computer, it is not recognized by my device manager, even though I have installed the Samsung drivers and the latest version of Kies. I have tried wiping the Tab through recovery, but this doesn't help either. Trying to mount the SD card initially gives me an error message that the gallery force closed. Subsequent tries to mount the SD look good on the Tablet, but don't register on my computer.
Other devices (Motorola droid, HTC Thunderbolt, and Samsung Fascinate) all work fine and I've been able to root without any troubles. Other than this problem, the tablet appears to work properly.
Any help would be greatly appreciated.
Seth
currently there isn't a working version of CWM for the CDMA tabs, so really Odin and Heimdall (better option) are the only ways to currently flash stock or custom roms/kernels. You might want to try the driver installer that comes with Heimdall, as that can force install the drivers. I've had to do it a couple times on different pc's before I could get anything to work.
Happy new year all,
I have a 8.9 wifi only 32gb amazon.com version 7310.
I can’t get it to connect to my windows PCs (multiple PCs) ANYMORE…I have the drivers installed, but when I plug it in, windows will ask me for the driver and when it tries to install it I get an error (device not installed properly).
Some history:
I have the usb driver (“GT-p7510_USB_Driver_v1_3_2360_0-Escape.exe”) installed from the thread: “[GUIDE]Root, Bootloader Mode, ODIN, Recoveries & NANDROID Backup [7300/7310]”
Fresh off the box I hooked the tab up to my windows XP PC using the above driver and my PC recognized it. Also ODIN connected too.
I installed CWM (“Overcome_CWM_Recovery_v5.1.2.6_P73xx.zip”) from the above thread and rooted the tab using the root file (“Root.zip”) also from the above thread.
After that I couldn’t get the tab to be recognized from my PCs. But ODIN still works.
BTW, I’ve also tried Samsung Kies but it did not work (couldn’t connect to the tab).
I did a hard reset but I still have the same problem!!!
I need to be able to move files from my PC to the tablet as fast as possible. Wifi works but it is slower than usb 2.0!!!
Any help?
Thank you,
Have you tried uninstalling the drivers, restarting, then installing again? Sometimes Windows is a bit iffy. Also, the drivers from Kies are kinda different and tend to conflict (happened to me once). Another tip I'll give you: certain ROMs tend to hate having USB Debugging set to ON at Settings > Applications > Development. They just won't connect through USB while having that set to ON. I found this behavior on Android 3.1 ROMs, haven't had it in the KJ5 firmware and it's been almost two months with it. Best of lucks solving this!
issue solved by re installing the kies
Thank you for your suggestion.
Re installing kies and the latest kies update solved the issue.
I've latest KIES version, the tab is rooted and cwmodded but stock rom. When I try to connect it to kies I get a neverending "connecting", so basically it never establishes a connection. I tried reinstaling drivers and with and without debug usb, but no luck. Do you have any clue?
same as my tab,
Sent from my GT-I9300 using xda app-developers app
Problem with KIES
My tablet is not rooted, it have stock rom, haven't changed anything. I have installed latest KIES on my laptop with Win 7 x64. When I try to connect my tablet to PC, I can access it's contains, but if I try to connect to KIES it say: Cannot start service on the device. Please disconnect and reconnect the device. I try that too, but every time it's the same. I have tried to re-install KIES couple of times, but it's always the same story... Anybody have some ideas?
I able to connect in the pass, that was how I get android 3.1 upgraded to 3.2
Sent from my GT-I9300 using xda app-developers app
I had the same issue, then I reinstalled the drivers, REinstalled KIES and there even was some messing around in "services". for WIFI connection thou, but it fixed my connection issue via cable.
When I bought my "8.9 tab wifi only"and plugged it up for the first time i had no problems using kies. It updated to 3.2 the NEVER worked again.Once you install kies it installes your drivers. If you uninstall kies it will ask if you want to keep the drivers or uninstall them."KEEP THE DRIVERS" I don't use kies at all. I use drag-n-drop to transfer files.You may also notice at times when moving files"mostly video" that windows explorer will crash"may just be my p.c." but a way around that is to simply zip the file,move it to your device,unzip from device using a file manager,I use "file manager HD"
Galaxy Tab 8.9 not connecting to Kies
Same problem here, Connected first time to Kies but since updating Kies I have never been able to connect.
Uninstalled and Reinstalled various times, restarting computer but still inop.
kies has many problems in its own software... ur pc can see it very well... samsung released a "Piece of Cr*P" software to just show themselves... Kies isnt really useful for anything rather than updates and syncronizing...
I saw someone posted a quote from samsung about the kies problem, and the only answer was its kies thats messing, not the tablet
I had this problem and I fixed it by reinstalling kies and basically enabling WIFI synk from pc (Kies setup guide) and after that it works from the USB.
(sorry for typos)
I had a similar problem but I ended up downloading the latest version of keis first. I also checked to make sure my computer was up to date with the latest usb drivers. After an update the Samsung keis software recognized my tab and was up and running.
Sent from my GT-P7310 using Tapatalk 2
first you should have usb debugging off
second, I tried all sorts of solutions (like uninstall/ install back again for kies or drivers and so on). I think there is a problem with the drivers.
If you plug in your tab, go to device manager and look for unknown devices or so (entries with exclamation marks and so )
I got it installed as samsung composite usb but also got part of the drivers not being correctly installed ( PCI flash memory having exclamation mark)
the only solution I found was to factory reset the tab. I did this and the tab is now recognized by Kies via USB without doing any additional work to the drivers or kies installation
latest kies version as of the post date, Windows 7 professional x64.
I still don't know if it was some wrong setting for an app or the firmware itself had something messed.
by the way, the tab was only 2 weeks old and it didn't connect from the very first time although the tab was just out of the box with no root/CWM recovery. just everything stock with normal apps and it didn't connect.
it happen to my nexus, but when I change to other PC, it working fine.. my 8.93G connecting very good for this moment and hope it will till i sell it..
Hello.
I recently tried to root my phone with the S3 Mini Toolkit. I have the GT-I8190 international version.
It said that I needed to Install the device drivers first (which is the v1.5.18.0).
So I did it as instructed in the command prompt. When it finished installing the driver, and I plugged my device as instructed, suddenly came an error message "Samsung Hardware ID is missing error", and my Mini became unrecognized all of a sudden. I couldn't access my device storage.
There was an error message too popped up in my device saying that It cannot find a driver in my PC for my device.
I tried to install KIES afterward, hoping that it can solve the problem. Thing is, it didn't. My device was still not recognized, and KIES couldn't recognize it either (Connecting.....for, like forever).
I then tried to Google the problem, and came by a forum, saying that it was the 1.5 USB Drivers that caused the problem (but the case being talked in the forum is for Galaxy S3). Said that my PC need to uninstall the 1.5 drivers, uninstall KIES, deactivate the automatic device installation by Windows, and install the 1.4 version.
Well, what I can find in the internet is the 1.3 USB Drivers, so I tried the instructions, and installed the version 1.3 USB Drivers, and my PC recognized my device again, and able to access the storage.
(also, the 1.3 drivers made Odin unable to recognize my phone too in download mode).
Does anybody here have ever experienced the same problem as mine? Or did I do something wrong?
I managed to root my Mini, being not recognized by the PC (but registered at the toolkit) in the whole process, and then did the whole uninstalling and re-install the USB drivers so that I can access my storage again.
Because it's rather a painful process if in the future I want to use the toolkit again with the newest drivers.
Note:
- before rooting, I did the latest OTA update.
My current device info is
Android version 4.1.2
Baseband version I8190DXAMA2
Build vnumber JZO54K.I8190DXAMA2
Region Indonesia
Thank you very much
Bumped. Can anybody gives me some enlightenment about this issue? Thanks
So attempting to root I can not get my tmobile note 4 to be recognized by Odin when I enter downloading mode. I obviously tried installing samsung usb mobile driver, when I did a message window in Japanese with a red x appeared on my win 8.1 desktop. I tried different downloads of driver and even tried samsung site all give same error window. I then installed latest kies and it installed ok and recognized my note. I tried Odin and entered dl mode on note and still Odin doesn't recognize device. I uninstalled and reinstalled kies and driver but no luck. Is there a setting on my phone that's not allowing. I have usb Debug checked. When in dl mode it just says secure download enabled and then says entering udc. I am adb literate but new to odin. Any suggestions ...
Delete everything and start over. My laptop automatically downloads the drivers for me so not sure if your desktop will do the same.
If not, download drivers or just reinstall then and try it out and see if that works for you.
Well my fix was to go to a friend's house and use there pc. Tried everything and my win 8.1 did not like.
Removing or reinstalling Samsung drivers can be tricky. You did the right (easy) thing going to a different computer. Trying to use the same computer for an old and new Samsung device at the same time can easily cause your problem to happen. I found that you can't just switch between different versions of the drivers willy nilly. Perhaps the uninstaller routine doesn't work? Registry issue? Don't know.
If your win 8 pc can be rolled back to before you ever installed kies or a Samsung driver you might be able to get it to work using the correct (new) driver. That said, I'm still using the same driver I installed for my Note 2. Since it worked for the Note 4 and knowing what could happen, I left well enough alone!
Sent from my SM-N910T using XDA Free mobile app