[Q&A] [ROM][KitKat] CM11.0 for the LG 2x - LG Optimus 2x

Q&A for [ROM][KitKat] CM11.0 for the LG 2x
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][KitKat] CM11.0 for the LG 2x. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Quick help for a newbe: where to find New Bootloader
Hi there,
I am a newbe that wants to load a custom rom on my LG P990.
I've read a lot about it already and on this forum etc.
I hope you are willing to provide me a few sentences explanation:
* I want to load CM11, I need the New Bootloader for that. Where can I find the New Bootloader?
* I also found out that there is an All In One Toolkit. Does this toolkit include the New Bootloader? Can I use this All In One Toolkit for flashing CM11 to LG P990?
* It does not become clear to me if I only need to download the ROM or also the kernel? Or does the ROM already include the correct kernel? (e.g. following this latest build/update on this XDA forum: post by gucky01 on 25 Oct. 08:41)
* Finally you can maybe provide me a few words on the difference between 3.1 and M1? Why have two sources of ROMs been developed, why not just continue with 1?
Thanks a lot!

In aio u can change bootloaders
Flash with recovery the twrp 2.7.10.zip search it in development. After boot to your twrp recovery make wipe
And install the rom
The kernel is inside the cm11 rom

OK, I was able to flash to CM11.
Just one question: I searched hell out of google, but I cannot find nowhere TWRP 2.7.10 (or twrp 2.7.10.zip), and not at all for LG P990.
Latest version for LG P990 is TWRP 2.6.00 according to official TWRP site and according AIO-tool.

See this! The lastets version of TWRP on our phone.
Code:
http://forum.xda-developers.com/devdb/project/?id=5697#downloads

foober said:
See this! The lastets version of TWRP on our phone.
Code:
http://forum.xda-developers.com/devdb/project/?id=5697#downloads
Click to expand...
Click to collapse
Here you are
DaveCool said:
OK, I was able to flash to CM11.
Just one question: I searched hell out of google, but I cannot find nowhere TWRP 2.7.10 (or twrp 2.7.10.zip), and not at all for LG P990.
Latest version for LG P990 is TWRP 2.6.00 according to official TWRP site and according AIO-tool.
Click to expand...
Click to collapse
See?

Bad Battery - Battery life (Advice)
If some of you have noticed sudden "reboot" let's say, I have got an advice for you!
Some months ago, my phone suddenly turned off even if the battery level was up to 80 percent. I was pretty shocked and I did not know what that means. Then my phone tried to reboot but it stucked in bootloop and I could not turn on the phone. Is it caused by rom? I thought. So I removed the battery and inserted back again. I plugged in the charger and then I was able to boot my phone again. It happened very often and I was crying a lot.
It was very annoying so I decided to buy a new battery. I replaced the old one by the new one and now everything works perfectly.
And of course it will take some time to get the new battery working well (I recommend full charging cycles (from 20 percent to 100 percent)).
Do not discharge your battery to 0 percent. It does not like any of the Li-ion batteries.

touch my phone does not work
please help me !

can you teach me how to build tonyp's source code ,thks!
it sees some code not in tonyp's framework/base ,like getSimNameBySubScription.
sorry,i'm not good at english.

Battery Charge Issue
First of all thank you tonyp and all others who worked to get Kit-Kat for our old phones and make it new again
However I have below questions - would be really grateful if someone would help me with them. I am on M1 Jul 21:41:16 CEST2014-20140716
1) I am unable to upgrade my M1 with CWM and TWRP with all versions and all possible wipe methods, was trying to update (gucky01) weekly updates but always ended up in an error, tried dirty, clean dalvik, clean partation..aah everything, but no go
2) This is most important one, since I have upgraded to above mentioned ROM from stock ICS, its taking ages to get a complete charge. Really need some help here since I was able to get a full charge in like 80mins I guess with stock, however with this one it usually take about 5 hours! for 1500mAh battery?? Really?? C'mon!!
Let me know if there are any workarounds for above posted questions.
Thank you again to all developers, god bless you all

link for the updates
can someone please give me the link to download the new updates

Hey guys, i'd like to ask:
Running 13. October build w/optimizations and latest 3.1 KK.
When I manage to get oom (4 tabs in browser or so), phone becomes unresponsive (as expected), but then the notification bar gets really laggy. Interesting is that when it's extracted to fullscreen, the animations are really slow (5 fps or so) , but when the less i see from navbar, the faster it is. (When i swipe down the bar for just a little bit, it doesn't even lag). Do you know what can cause this problem? I thought it might be rendering problems after systemui.apk got forceclosed while oom.
Sent from my LG-P990 using XDA Premium 4 mobile app

F2FS Support
Can you make a version with F2FS like DJNoXD did?

Unknown issue with Google Play services
Update: I found a solution. Please see post #20 below.
Hi, I've installed the latest tonyp test build 20150130. I did a full wipe but often get "Unknown issue with Google Play services." Any ideas why?
I have installed some of the latest Google apps such as Maps, Play Music, and Hangouts.
Google Play services is currently version 6.5.99 on my phone. I've tried clearing the cache and can't see how to reinstall it.
Any help would be greatly appreciated, thanks.

Everything is great except for the camera. I have a problem when recording video . picture freezes . I do not have that problem with ICS . I use the kernel M1 .

Anyone have problem with mobile data?I use last tonyp rom and its fantastic,but same problem i have like on previous roms,mobile data crashed all the time...

Video recording and mobile data work fine here.
Sent from my LG-E435 using XDA Free mobile app

radio FM
there is any way to see the radio fm work on cm11 like the stock rom?

djpagz said:
2) This is most important one, since I have upgraded to above mentioned ROM from stock ICS, its taking ages to get a complete charge. Really need some help here since I was able to get a full charge in like 80mins I guess with stock, however with this one it usually take about 5 hours! for 1500mAh battery?? Really?? C'mon!!
Click to expand...
Click to collapse
As lubosmj says above in post #7, try getting a new battery. I got one off ebay for a cheap price and it really helped!

[solved] Unknown issue with Google Play services
jonomcleish said:
Hi, I've installed the latest tonyp test build 20150130. I did a full wipe but often get "Unknown issue with Google Play services." Any ideas why?
Click to expand...
Click to collapse
Hey all, I solved this by updating Google Play services to version 6.6.03. You can find and download it on MihirGosai's [APPs] [SHARE] Google Play Services 6.7.74 and Google Play Games 2.2.09 thread.
Not sure if it made a difference but I also switched from CWM to TWRP 2.8.1.0 found on DJNoXD's [RECOVERY] [newbl] TWRP 2.8.1.0 touch recovery [2014-11-30] thread.
Things seem a lot more stable after these two changes.
Thanks for the awesome ROMs tonyp!!

Related

[Q&A] [Rom] [4.4.4] Cyanogenmod 11 for Moto X

Q&A for [Rom] [4.4.4] Cyanogenmod 11 for Moto X
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Why do not you gets the wifi error, error in the security settings, screen lock / slide
Roaming Indicator Flashing
My Moto X (XT1056) works perfectly on stock ROM but when I installed CM11 on it, its roaming indicator started flashing. I have tried changing its network modes but still it keeps on flashing. I can receive messages and calls but can't make any call or send messages. What to do?
Sorry, I 'm new to this , which version I should download for my moto x 1058, thanks
i don´t speak english correctly
In June, I made a mistake that wiped my phone all the way down to boot img. Using adb and my extremely limited knowledge of how to use it, I was able to get this puppy up and running again. Due to money issues, it's just a small entertainment center for me now, (music, movies while I ride the bus, news & books, etc,) so I depend on WiFi heavily. When I (luckily!) Reformatted the phone from scratch, (misplaced my backup, when internal memory was wiped when the oops happened,) cm11 was having problems with WiFi. I believe that, from what I'm reading in the cm11 post, that the WiFi issue is cleared up and I'd like to get up to date, setting as how I'm using an April release. I'm using a sprint moto x, (1056, I THINK!?)
Am I gonna have to find this modem people are talking about, or can I just clean flash up to the latest nightly?
Can anyone throw me a little bone here?
Thanks, all...
Any and all info is greatly appreciated!!!
Hammerdroid said:
In June, I made a mistake that wiped my phone all the way down to boot img. Using adb and my extremely limited knowledge of how to use it, I was able to get this puppy up and running again. Due to money issues, it's just a small entertainment center for me now, (music, movies while I ride the bus, news & books, etc,) so I depend on WiFi heavily. When I (luckily!) Reformatted the phone from scratch, (misplaced my backup, when internal memory was wiped when the oops happened,) cm11 was having problems with WiFi. I believe that, from what I'm reading in the cm11 post, that the WiFi issue is cleared up and I'd like to get up to date, setting as how I'm using an April release. I'm using a sprint moto x, (1056, I THINK!?)
Am I gonna have to find this modem people are talking about, or can I just clean flash up to the latest nightly?
Can anyone throw me a little bone here?
Thanks, all...
Any and all info is greatly appreciated!!!
Click to expand...
Click to collapse
Before anything, reinstall the stock ROM. After that you can use some custom rom if you want.
Don't forget to back up your data.
does anyone have a backup of a build where the WiFi works after a wipe? (WiFi is broken on the newest builds, unless you update from an older one without wiping)
>1 week builds aren't available at download.cyanogenmod.org anymore :/
tomatoketchup said:
does anyone have a backup of a build where the WiFi works after a wipe? (WiFi is broken on the newest builds, unless you update from an older one without wiping)
>1 week builds aren't available at download.cyanogenmod.org anymore :/
Click to expand...
Click to collapse
I have downloaded the 21/10 build, u want it? To uploaded to mega :9
I have downloaded the 21/10 build, u want it? To uploaded to mega :9
Click to expand...
Click to collapse
yes please!!
GPS doesn't fix CM11 GHOST
Hi. I use cm 11 during 2 weeks and i have a problem wih the gps. Indeed, on the lastest nightly, the gps can't fix. How can we make the gps fixing ? Thank you
Sorry for my bad english.
Following this thread since a couple of month I see there won't be a snapshot coming.
So: is there a nice daily you recommend for my moto x (xt1052)?
Since its a long way from stock 4.4.4 I don't intend to wipe.... more than -hopefully- once.
Achilles Etimone said:
Following this thread since a couple of month I see there won't be a snapshot coming.
So: is there a nice daily you recommend for my moto x (xt1052)?
Since its a long way from stock 4.4.4 I don't intend to wipe.... more than -hopefully- once.
Click to expand...
Click to collapse
Well today build its a snapshot the first!!
Yes!
Marco Lomas said:
Well today build its a snapshot the first!!
Click to expand...
Click to collapse
Looking FORWARD to it.
GPS on Moto X
Can't seem to reply to tekanina in the main thread here:
http://forum.xda-developers.com/showpost.php?p=56970715&postcount=673
-------
Quote:
Originally Posted by sayhellotwoheaven
hi! i have a issue with the last SNAPSHOT M12.
Mi GPS doesn't works normally. In gmaps get stuck in my location and don't move when I walk or drive. Additionally, I play a gem called INGRESS, an aumented-reallity-game that uses the GPS, and same problem, when i walk or drive, gps stuck in the position, or random jumps.
help pls ):
-------
Tekanina replied:
Flash stock ROM get GPS lock, boot into recovery flash CM. GPS should work. I have to do this every once in while when GPS starts acting up usually good until you clean flash or switch Roms.
------
I was having this problem until moments ago. GPS Status and Toolbox would never find a single satellite, though I found it worked fine in stock.
Strangely, Tekanina's advice worked for me on my Xt1053 DE. I restored a TWRP backup of stock (not for the first time), got GPS lock, then flashed the latest CM nightly, got an binary error on flashing, did a wipe, binary error went away, flash succeeded, booted up, got GPS satellites right away! Not sure if it was getting a GPS lock in stock, or the full wipe that fixed this. I though for sure GPS was borked in recent versions of CM on ghost. Seems it isn't!
---------- Post added at 04:02 PM ---------- Previous post was at 03:56 PM ----------
Tony77FR said:
Hi. I use cm 11 during 2 weeks and i have a problem wih the gps. Indeed, on the lastest nightly, the gps can't fix. How can we make the gps fixing ? Thank you
Sorry for my bad english.
Click to expand...
Click to collapse
Tony, try Tekanina's advice here in the main thread. Worked for me:
http://forum.xda-developers.com/showpost.php?p=56970715&postcount=673
Slightly simpler question here: Does CM11 for MotoX still let me use Active Notifications, the twist-to-launch-camera, and the always-listening for OK Google Now functions?
Notifications
shadowfist23 said:
Slightly simpler question here: Does CM11 for MotoX still let me use Active Notifications, the twist-to-launch-camera, and the always-listening for OK Google Now functions?
Click to expand...
Click to collapse
Unfortunately, no, it doesn't. Due to the lack of a normal notifications LED, this means you get no indication at all of notifications. There is a bright green LED in the earpiece that a couple of people have figured out how to turn control, but apparently it can't be used as a notification LED because (at least for now) it requires a USB connection to turn on:
http://forum.xda-developers.com/moto-x/themes-apps/app-moto-x-charging-led-control-tasker-t2602689
https://github.com/StephenMilone/MotoX_LED
http://forum.xda-developers.com/moto-x/general/enable-moto-x-charging-led-tasker-t2603085
http://review.cyanogenmod.org/#/c/57550/
I'm currently using cm11 M12 snapshot on Verizon moto x but if I flash any of the newer nightlys,I get an error system. Ui is not responding. This error pops up or out from nowhere . The snapshot works fine . anyone else experiencing this?
Nightlies crashing, looking for stable version
Seeing following builds crash (com.android.phone) crash constantly when enabling Wi-Fi on the below images:
cm-11-20141224-NIGHTLY-ghost.zip
cm-11-20141219-NIGHTLY-ghost.zip
Anyone know of a recent, stable version that I can fall back to?
Thanks!
I have bootloader unlock from motorola official website, with twrp installed & rooted. also my cell is SIM UNLOCKED.
Everything was perfectly working on stock.
But After flashing latest Build today on my XT 1056 sprint, Signal bar showing 'R' with no signal. But I can make call & msg.
How can I resolve the said problem?
BTW, I am using my cell in Pakistan, not on sprint network.
Sent From My Moto X
Hi all,
anyone have a valid link for cm-11-20150105-NIGHTLY-ghost.zip
Thanks in advance
Zanglus

[Q&A] [NIGHTLY][ROM][4.4] CyanogenMod 11 for Samsung Galaxy S

Q&A for [NIGHTLY][ROM][4.4] CyanogenMod 11 for Samsung Galaxy S
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [NIGHTLY][ROM][4.4] CyanogenMod 11 for Samsung Galaxy S. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Memory leak?
First of all thank you very much to everybody who has been taking apart of developping this rom. It works generally really well. However my SGS has developped some sort of memory leak. During usage it starts litle by litle to loose amount of available memory and at the same time the amount of preloaded apps to memory is also shrinking(according to settings). Eventually available memory goes under 50Mb and phone slows down to unusable. Restart fixes the problem. Sotimes it works days or even a week sometime less.
This same problem aready existed with he origial rom(2.2.1). Eaven after a factory reset it only worked well a couple of hours. Updated with odin to 2.3.6 but touchwiz launcher was freesing all the time. Installed CM11 trough CM9 and formatted system and wiped caches before C11 . Everyting seems to work well but the original problem still remains. Although it now works much longer than with the original rom.
Hardware problem? Some app causing this(only apps running all the time is whatsapp and smooth calendar(according to settings))? Time to buy a new phone?
viber
my viber dont work after install gapps
how i can fix this problem ?
getting status 0 error
hi,
i have sgs 1 i9000 international version
after flashing from stock kernel/rom android 2.3.6 to Semaphore_kernel_JVT_1.8.0 for root, i've got cm 9 (cm-9.0.0-galaxysmtd.zip) with Semaphore_ICS_1.3.0. if i try to go higher cm 10-10.2 or cm 11 i get error status 0 after tyring to install from sd card the zip. tried redownloading the zip. using different version from cm site.
still using semaphore kernel with cwm tried all versions installed with odin for JB for cm10 and KK for cm 11. still i get status 0 at install.
done the wipe cache dalvik and factory reset every time before install.
usually to escape the bootloop and reboot i flash the Semaphore_ICS_1.3.0 again as my rom remains unchanged(hopefully ) after the failed installs. isn't my device compatible with cm10-11. do i need another kernel/cwm version?
CyanogenMod for samsung galaxy tab 3 7.0(SM-T211)
any one please help me to get CyanogenMod for samsung galaxy tab 3 7.0(SM-T211)
newguysgsi9000 said:
hi,
i have sgs 1 i9000 international version
after flashing from stock kernel/rom android 2.3.6 to Semaphore_kernel_JVT_1.8.0 for root, i've got cm 9 (cm-9.0.0-galaxysmtd.zip) with Semaphore_ICS_1.3.0. if i try to go higher cm 10-10.2 or cm 11 i get error status 0 after tyring to install from sd card the zip. tried redownloading the zip. using different version from cm site.
still using semaphore kernel with cwm tried all versions installed with odin for JB for cm10 and KK for cm 11. still i get status 0 at install.
done the wipe cache dalvik and factory reset every time before install.
usually to escape the bootloop and reboot i flash the Semaphore_ICS_1.3.0 again as my rom remains unchanged(hopefully ) after the failed installs. isn't my device compatible with cm10-11. do i need another kernel/cwm version?
Click to expand...
Click to collapse
So now when you have CM9, you should flash CM10.2. It is normal that it first warns, as system partition will be enlarged.
So in fact you must flash it three times and reboot. First time it will only warn of data lost due to upcoming repartition. Second time it will only update recovery to CWM 6.0.4.5. Third time it will flash ROM and after that you must reboot the device.
After being booted into the OS once, you can install CM11. Recovery versions older than CWM 6.0.4.5 or TWRP 2.6.3.1 can not flash KitKat.
tetakpatalked from Nexus 7 flo
---------- Post added at 11:30 PM ---------- Previous post was at 11:27 PM ----------
yasvi9 said:
any one please help me to get CyanogenMod for samsung galaxy tab 3 7.0(SM-T211)
Click to expand...
Click to collapse
You are in totally wrong thread here, this is for Samsung phone i9000, Galaxy S, first version.
Find threads for your Tab, they have there also much nicer ROMs than Cyanogenmod.
tetakpatalked from Nexus 7 flo
Cannot go into CW recovery mode to load Cyanogenmod
Posted in wrong thread, long night, sorry
cm12 ????
Hello guys! This is my first post here. I couldnt read all 300+ pages thats why i wanted to ask you. I read only positive comments about this rom but I can not se anyone having Bettery drain problem. I installed the ROM 2 days ago and the battery is just draining so fast. For example yesterday I took my phone off the charger at 11:00am and until 04:00pm it had 15 percent battery remaining with only little using and browsing the web for like 5-10 minutes. I can't be the only one having this problem. In the settings I see the Google play services, android system and display are having the best percentage. Please give me some answer or solution to this. I cant use my phone for just few hours a day.
Problem with virginmobile after cm11 install
My apn is set to ee carrier, instead of virginmobile and my carrier shows as orange - uk carriers btw. I know vm piggyback on ee network but when I search for carriers hardly any show up. Is this a known problem and is there a fix (modem flash or other).
Is the nightly 11 version smoother when compared to the stable 10.2.1? What are the main bugs, if any?
Is there any way to make art runtime to work? I'm using the latest nightly but it stucks in bootloop each time i select art
Problem with touch-input
I have a question concerning a bug I am experiencing. Often I am not able to make any touch-command on the right wing of the screen, about 1cm, this is especially annoying when it happens during typing. I did not experience the same bug on the original firmware, I believe. The occurence is not bound to any special app, it even happens on the Home screen.
Is this a known bug and is anyone experiencing the same? Any suggestions what causes this?
Is there a way to increase the RAM and speed up the phone?
So I installed this ROM (11-20311118-UNOFFICIAL-galaxysmtd which is one of the older versions of CyanogenMod 11) on my Samsung Galaxy S i9000, but I encountered a few issues:
- I occasionally lose the Wi-Fi connection, and although it does reconnect itself in a short time, there is a problem with some online games — when the connection is lost, the game is lost which really bothers me.
- Some of the apps that seek a lot RAM memory to be used are really slow-running, like for example Snapchat — the back camera can barely be used and the snaps need much time to open.
- The screen can be unlocked without having to slide, that can be done by only pressing the button on the left side of the home button, which is probably a minor issue.
- Sometimes the phone just bricks when I get a call and I can't answer it, which is one of the major issues.
So, I wanna know if there is a way to fix these issues and maybe a way to increase my RAM memory or get Snapchat to work smoothly. Also, I wanted to ask if some of the newer versions of CyanogenMod 11 (KitKat 4.4) or any other ROM, like Jelly Bean 4.3 or the SlimCat ROMs, can fix any of the mentioned issues. What is the best ROM for my Samsung Galaxy S i9000?
Thanks in advance!
Deleted
Why was this deleted?
tetakpatak said:
Deleted
Click to expand...
Click to collapse
I really need help with this, why would you delete it?
xtremeaptitude said:
I really need help with this, why would you delete it?
Click to expand...
Click to collapse
LOL I have deleted my own post that I wanted to write initially in the development thread (by mistake posted here)
tetakpatalked from N7100
tetakpatak said:
LOL I have deleted my own post that I wanted to write initially in the development thread (by mistake posted here)
tetakpatalked from N7100
Click to expand...
Click to collapse
Oh, ok, lol. Sorry, I'm new here. So, can anyone help me with this?
xtremeaptitude said:
Oh, ok, lol. Sorry, I'm new here. So, can anyone help me with this?
Click to expand...
Click to collapse
OK, mate.... you seem to be nice fellow, so I will try to help, answers in order of your questions:
if you have dirty flashed CM11 build (over older version without formatting /data and /system): did you try pawitp's reset of wifi settings from the bottom of the OP in CM11 thread? Otherwise also changing wifi region might help (settings/wifi/advanced)
the i9000 has indeed only total 512 MB memory, of which some 364 MB can be used normally. Well, you can increase these by flashing in recovery mode zips of Semaphore kernel for KK (3.4.3) and right after that BigMem libs for KK from Mackay KK ROM Thread. Then enable in the app "Semaphore Manager" (Play Store) BigMem option, reboot, and you will have by default 407 MB memory.
I fail to understand your last question: do you mean that the phone freezes, reboots, or "brick"? Bricking would mean that your OS fails and you have to flash ROM again or restore backup??
Good morning guys.
I use Mia ROM rooted fw 2.2.1 on my Galaxy SL i9003.
Can i flash directly this ROM on my device to update it or there are other best light ROM for my device?
Thank you
Inviato dal mio Zp 998 utilizzando Tapatalk 2

[Q&A] [ROM] [5.X] [p880] Euphoria-OS 1.0-beta Unofficial [2-1-15]

Q&A for [ROM] [5.X] [p880] Euphoria-OS 1.0-beta Unofficial [2-1-15]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [5.X] [p880] Euphoria-OS 1.0-beta Unofficial [2-1-15]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
the download link is too slow for the new version available. is almost impossible to try to download it. some other link available? please!
There isn't other link for now.
Q:When set to -1 and delete the # they never have backlight when the option is like this.I puttet the # again.How to make it flashing when touch them,not the screen.And how to change backlight time?
delete
Didn't expect such a great stability and performance (and working features) from first public Lollipop ROM. Reboots occur sometimes (adb shell screenrecord crashed, AFAIK it is related to Tegra blobs), but the biggest surprise for me was that the ROM is smooth!
To all contributors: Great job!
bluetooth
Is BLE working? Have somebody tried android wear with this rom?
Someone reported it not working on the 2-1 version, and given that the second post says the dev can't test it themselves, I highly doubt it'll work on the 4-1 version.
Then again, I have no way of trying it myself, really, which at this point is the best way to know for sure.
Sent from my Optimus 4X HD using XDA Free mobile app
ble
SmallDesires said:
Someone reported it not working on the 2-1 version, and given that the second post says the dev can't test it themselves, I highly doubt it'll work on the 4-1 version.
Then again, I have no way of trying it myself, really, which at this point is the best way to know for sure.
Sent from my Optimus 4X HD using XDA Free mobile app
Click to expand...
Click to collapse
android wear working really well on build 4\1\15 .so i think ble is ok(not fast as on cm11)
How to turn off google search bar on the screen. Search in setting the bar button operation does.
Sorry don't quite understand the question. But if you are trying to get rid of the search bar on the homescreen you have to install another launcher like Nova Launcher
I can't take root in this rom, I flashed supersu from recovery but when i turned on the device used to say that i had not root permissions, I noticed that the ram was also neatly full. Now i reflashed the rom and it is back to normal. Can you help? Sorry for my english.
Busaton said:
I can't take root in this rom, I flashed supersu from recovery but when i turned on the device used to say that i had not root permissions, I noticed that the ram was also neatly full. Now i reflashed the rom and it is back to normal. Can you help? Sorry for my english.
Click to expand...
Click to collapse
Did U try this package (flashable)? http://download.chainfire.eu/641/SuperSU/UPDATE-SuperSU-v2.40.zip
for me working great.
Stupid question but i cant flash WerewolfJB v10 kernel and Mourta 9.02 without problems.
On WerewolfJB i dont have network data, but on Mourta kernel i have problem with Dialer (cant open apk, only FC)
On stock kernel i dont have any problems.
damru said:
Did U try this package (flashable)? http://download.chainfire.eu/641/SuperSU/UPDATE-SuperSU-v2.40.zip
for me working great.
Stupid question but i cant flash WerewolfJB v10 kernel and Mourta 9.02 without problems.
On WerewolfJB i dont have network data, but on Mourta kernel i have problem with Dialer (cant open apk, only FC)
On stock kernel i dont have any problems.
Click to expand...
Click to collapse
Ok
thanks, I had flashed a version oldest, now works fine : D
gogreous rom! fast , smooth and no bugs at all for me
gratified to see that our p880 has L now , flashed the mourta kernal and got 23758 on benchmark!
Battery drain
I love this ROM - the best I had to date, but unfortunately I have enormous issue with battery drain. Before flashing, batery life was average and I could use it for few hours straight. But now when I use the phone it can even drain 20% within 10 minutes. When the phone is sleeping it drains battery normally. When I used CPU Spy it showed that the phone on awake mode is using almost all the time full CPU power. I'm using baseband LGP880AT-00-V20b-EUR-XXX-JUL-17-2013. Also the phone is heating very much. Which also makes me concerned.
I never had issues like this on other custom roms. I also use the ROM from January 6. If you can please help - I really like this ROM, but if nothing can't be done I will have to go back to something else.
Busaton said:
I can't take root in this rom, I flashed supersu from recovery but when i turned on the device used to say that i had not root permissions, I noticed that the ram was also neatly full. Now i reflashed the rom and it is back to normal. Can you help? Sorry for my english.
Click to expand...
Click to collapse
You need to enable root in settings/developer options. Don't install any superuser-app. Superuser access doesn't require an app now, it's been tied to privacy guard on latest build.
I have the same issues
I can't start outgoing calls. When is start a call the phone says call can't started. Incoming calls working
Whats kernel best fit for Euphoria-OS 1.0-beta Unofficial?
thank you:laugh:
I encounter in last build and on latest build a black screen when i answer a call.
and i cant hear any voice on when i answer
need to pull the battery to back to normal.
everything is fine on me .. i notice a heat on CPU but minimal.
i reduce Max Freq to 1100mhz to reduce heating problem.
signal is working but it has a "!" ? dont know what is that.
and anyone try the Cyiodak Kernel? that is the best kernel on LS Rom
baseband v20B euro
Mobile Data and Outgoing Calls
Under the Version of the 4th January I had the Problem that i could make any outgoing calls or use Mobile Data. Wifi, aswell as, sending and recieving SMS and recieving calls worked fine. After i upgraded to the Version of the 6th January i had the same Problem.
Then I wiped data etc. and installed the Version of the 6th January directly. After that I had the Problem that my SIM-Card locked itself every 1 or 2 minutes so I had to enter my PIN over and over again. After that i did another clean install with the Version of the 4th January. Same Problem with Mobile Data and Calls as I had the first time.
Today i tested the Version of the 8th of January. The same problem occured with Calls and Mobile Data and I althought could not connect my phone with my Laptop via Bluetooth.
Does anyone have a solution for me?
I found one minor problem which i althought post here because I can not post in the Dev.-Thread (I am new here, therefor i can only post here).
The camera works fine, in making photos and making videos but it is getting laggy when I change from back- to frontcamera.
Overall the ROM seemed pretty smooth and as far as I can tell the rest works fine and I would love to use it as my everyday ROM but I can not resign on doing calls and using Mobile Data.
Do you need a log? I made one but I am not sure how i should send it to you.
Anyway, thank you for the great work!

[Q&A] [ROM][LP 5.0.2][27/02/2015] OmniRom Lollipop by HumberOS

Q&A for [ROM][LP 5.0.2][27/02/2015] OmniRom Lollipop by HumberOS
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][LP 5.0.2][27/02/2015] OmniRom Lollipop by HumberOS. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Lost Root
Hello, after the Lollipop installation the cellphone lost the Root access, how I can root again?
Thanks.
gtchapin said:
Hello, after the Lollipop installation the cellphone lost the Root access, how I can root again?
Thanks.
Click to expand...
Click to collapse
Go to this page http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip download SuperSU and flash zip like you flash rom and reboot now your captivate is rooted
Thanhtho96 said:
Go to this page download SuperSU and flash zip like you flash rom and reboot now your captivate is rooted
Click to expand...
Click to collapse
Thanks a lot, it solve the issue.
is the neatkernel compatible in this ROM ? hope capable because neatkernel is my savior to boot my Samsung Captivate.
My USBstorage is currupted thats why i use NEATKERNEL to swap in my repartition SDcard.
Hope you can help me... sorry for my bad english.
yddar17 said:
is the neatkernel compatible in this ROM ? hope capable because neatkernel is my savior to boot my Samsung Captivate.
My USBstorage is currupted thats why i use NEATKERNEL to swap in my repartition SDcard.
Hope you can help me... sorry for my bad english.
Click to expand...
Click to collapse
No. I don't think so. Your captivate won't bootup with this ROM + Neat kernel
i9000 kernel
Hello,
I have slimbean on my captivate with semaphore. When I try to flash this rom, it tells me that my phone is a i9000 instead of an i897, which it actually is. Which Kernel can I flash that works with this rom, but also is a captivate kernel?
Thanks!
Install APK
I can't install APK file
It's say "Can't open file"
albogino said:
Hello,
I have slimbean on my captivate with semaphore. When I try to flash this rom, it tells me that my phone is a i9000 instead of an i897, which it actually is. Which Kernel can I flash that works with this rom, but also is a captivate kernel?
Thanks!
Click to expand...
Click to collapse
That would be cause you flashed the I9000 version of Slimbean. You can change it in your build.prop but wouldn't suggest it if you're new at it.
Go into your phone settings and check what variant/version is says you have. If it says I9000, you'll have to flash the I9000 version. That being said, if you're 100% your phone is an I897, flash back to stock, grab the I897 Slimbean and then flash Semaphore.
hts2007 said:
I can't install APK file
It's say "Can't open file"
Click to expand...
Click to collapse
What apk? You'll need to provide some more details.
Question on OmniRom Lollipop by HumberOS - Could not be downloaded, error 491
Hi friends,
danielad200 wrote on 23rd March 2015, 09:54 PM
cannot install any app and geting error 491 in the market for install any app
No responses to that in the original thread. I have gotten this bug too. Searches tell me to remove my google account, clear the caches of Google Play, reboot, put in my google account and all will be well. Worked for everyone else on the google searches except me and maybe danielad200.
Any help or suggestions out there?
APN
5.0.2 With Gapps has been my daily driver for a few weeks now, its really smooth. Only thing that seems laggy to me is making calls, and the time lapse between receiving a call and the screen waking up.
5.1 Is worked even more smooth, only issue that I've had is for some reason, I'm not able to access Data with my APN. All my settings are correct. WIll try flashing again, to see if that might help. Is there anything that you recommend? Data worked fine with 5.0.2.
can't set lockscreen wallpaper
my lockscreen is black pure black? is that normal? can't set lockscreen wall paper by 'set as'
lconan90 said:
my lockscreen is black pure black? is that normal? can't set lockscreen wall paper by 'set as'
Click to expand...
Click to collapse
Navigate to setting/performance/advance tick force high-end graphics
Changelogs
pliz is there any changes in the card functionality of this new mod...? cause the former is quite disturbing.. it always shows no files in my card.. even after a reboot..
icon
the message app seems to be the old one like in 4.4~
---------- Post added at 09:53 AM ---------- Previous post was at 09:45 AM ----------
Thanhtho96 said:
Navigate to setting/performance/advance tick force high-end graphics
Click to expand...
Click to collapse
Thanks a lot
Random Reboot
I am still experiencing random reboots. Normally it happens if i am on the call for 8-10 min.
Works smooth
Works smoothly on my captivate no problem in connection to buttons functioning. although it has many bug issues timely some developers would fix them. Many Thanx to Humber OS creator cause of for captivate the exclusive LP OS made available.
It works!
I've been using this series of ROMs practically since they were released. I wanted to say a huge thank you to HumberOS and Monfro for the work they have done.
I personally have found, after testing each release, that Monfro's April 5.1 port is the most stable, smooth, and quick of all of them. I can't really vouch for anything related to taking calls though, as I don't have a SIM in it.
-venividivici24
Thanks a lots .. I have DHG-i897
Humbert , very good job , thanks a lots for your ROM works great , antutu benchmark got 7450 point , only that it is missing is the TV OUT ... that has this cell originally until kk 4.4.4
SGH-I897 ..
thanks against , and let me know if you add that function .. Gus
i897 best option
I have a Samsung Captivate i897 and just put 4.4.4 KitKat on it. Running a bit slow. How does OS version 5 work on the captivate? If people had to recommend a particular OS that was the most current you could get without any real loss in performance what would it be? Found 2.3.5 was fine the few minutes I was on it. But that's pretty old. Was originally going to go for 4.2.2 but found an article on 4.4.4 so went straight to it. Curious other's opinions.
Thanks.
jR

[Q&A] [ROM][L90][LP][UBERTC][Unofficial]Temasek Builds

Q&A for [ROM][L90][LP][UBERTC][Unofficial]Temasek Builds
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][L90][LP][UBERTC][Unofficial]Temasek Builds. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
questions about the temasek build
So before I apply the update to the new update to temasek do I need to flash the bootstack for it to work even coming from your optimized cm 12.1 builds? And if so what bootstck do we need? Thanks.
Edit: sorry I guess I read the discussion post to fast, I guess that's for people coming from stock or anything other than kitkat
TardisJacker said:
So before I apply the update to the new update to temasek do I need to flash the bootstack for it to work even coming from your optimized cm 12.1 builds? And if so what bootstck do we need? Thanks.
Edit: sorry I guess I read the discussion post to fast, I guess that's for people coming from stock or anything other than kitkat
Click to expand...
Click to collapse
Lol it's ok, no big deal. But yes, that is for users coming from stock LP
Thanks! I'm really looking toward to trying this out. Your work on the optimized cm 12.1 was amazing. And I'm still excited for Pitchfork if you are still working on that :good:
Temasek rom on d405N with LG quick case
Hi, am trying your latest right now, great job again.
Clean install using slim mini gaps as per your link.
Some issues/ remarks
1: First boot appears to get stuck on CM boot anim. (blue flashing andr. head) longer than with other roms, then goes straight to lock screen, no android updating popup etc. as has been my experience with other roms. So don't pull the battery too quickly (as I did at first attempt), patience is a virtue:angel:
2: Initial set up menu doesn't get past ''Checking connections'', (this may take up to 2 minutes) yeah right, so I hit back and skip and I setup wifi later.
3: Takes longer than for instance your optimized rom to get a cell connection after inserting sim pin.
4: Root acces problems. As has been mentioned in main thread.
5: Quick case working as it should opening and closing the case, missing other functionality, but this is great:highfive:,
That's it for quick impressions, keep up the good work and good night.
Is this rom working better than CM12.1? Does apps start up faster etc...
Love the ROM so far! Default CM root was working until the first reboot (tested with su command in the virtual terminal). The su command in terminal continued to work fine after reboot (remembered permission), but new apps could not get the root request notification. So I had to flash SuperSU as suggested. It does take some time to boot up after the flash but it's well worth. Got like 700 more points in AnTuTu!
Keep up the great work!
Is it possible to update to the latest build without loosing installed apps, configs etc?
mnml_guy said:
Is it possible to update to the latest build without loosing installed apps, configs etc?
Click to expand...
Click to collapse
You can always try, but considering LP development is going crazy lately, you may or may not run into issues. If you do have an issue, try a clean install
Sent from my LG-D415 using XDA Free mobile app
Is it possible to stop the automatic reboots from happening?
SLOWROLLA said:
Is it possible to stop the automatic reboots from happening?
Click to expand...
Click to collapse
There are kernel settings you can adjust that seem to minimize the reboots. But sometimes without even changing any settings, I can go days without a reboot. Then sometimes I'll get 3 in like an hour or 2. But if you mess with some settings, you can find ways to almost get rid of the random reboots
Sent from my LG-D415 using XDA Free mobile app
CaptivateKing said:
There are kernel settings you can adjust that seem to minimize the reboots. But sometimes without even changing any settings, I can go days without a reboot. Then sometimes I'll get 3 in like an hour or 2. But if you mess with some settings, you can find ways to almost get rid of the random reboots
Sent from my LG-D415 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks, I will try messing with the settings. Although, sometimes touch screen has some problems responding, locking and unlocking the screen fixes it. Despite its bugs, its still a awsome ROM. :good:
Hi guys So I have been wanting to install this rom, I was reading the directions and it says I must have an unlocked bootloader but I remember reading somewhere else that the bootloader is technically unlocked. Is that true? I just don't want to install this rom and cause a bootloop or something
Btw my device is the D415
Thanks
No notificatinos
Does anybody knows what happen with notifications? I hear them but they not appear in the notification bar.
Outstanding ROM, it works smoothly, looks divine, only thing is that It won't detect my Sim card, i flashed this to a LG L90 D400HN working on carrier Telcel in MX, other than that it's awesome... thanks a million dev
dnuuk said:
Outstanding ROM, it works smoothly, looks divine, only thing is that It won't detect my Sim card, i flashed this to a LG L90 D400HN working on carrier Telcel in MX, other than that it's awesome... thanks a million dev
Click to expand...
Click to collapse
Wow, that's the first time I've heard mention of a D400HN. Have you tried any of the other custom ROMs? And if so, is your sim card recognized on them?
Sent from my LG-D415 using XDA Free mobile app
CaptivateKing said:
Wow, that's the first time I've heard mention of a D400HN. Have you tried any of the other custom ROMs? And if so, is your sim card recognized on them?
Sent from my LG-D415 using XDA Free mobile app
Click to expand...
Click to collapse
Well @CaptivateKing, it's the one on Mexican market, as long as I know N is for NFC, i still haven't found out what is it about the H lol, ok... I got great news, I hope these are helpful for other people (not much noisy guys in LatAm trying to mod their LGs I'd imagine, but anyways I'll tell you my experience anyway), not more than 5 minutes ago, I ended up tweaking my D400HN and it's now working beautifully with your ROM mate (thanks a lot, I'm still mesmerized... it's like having a new phone lol), the huge issue with the sim card was the Bootstack... I'll be honest, I started this rom-changing thing with an old but faithful Verizon's Samsung Fascinate I got from the States a while ago, but never worked on LG until now, 6 months ago I decided to pass on my guarantee and rooted the phone and started to tweak it, long story short, I couldn't get it to work on this KDZ app by LG so I was getting desperate, started trying with some ROMs and discovered in a thread (I think it was @Xemidra, or someone else referred someone to his Bootstack thread if I'm not mistaken, [and I'm actually looking for the post to thank him lol]), the thing is that after flashing BOOTSTACK_v1.4_D405N-10F while on your ROM the phone inmediatly recognized my sim card, now im happy... trying to learn little by little about Java and all this new world... I'd really love the camera to record video and that'll be it for your ROM sir... I haven't had not a single reboot, not a glitch or anything, it just gets slightly clumsy at times but it's almost noticeable...
so, THANK YOU SO MUCH!!!
dnuuk said:
Well @CaptivateKing, it's the one on Mexican market, as long as I know N is for NFC, i still haven't found out what is it about the H lol, ok... I got great news, I hope these are helpful for other people (not much noisy guys in LatAm trying to mod their LGs I'd imagine, but anyways I'll tell you my experience anyway), not more than 5 minutes ago, I ended up tweaking my D400HN and it's now working beautifully with your ROM mate (thanks a lot, I'm still mesmerized... it's like having a new phone lol), the huge issue with the sim card was the Bootstack... I'll be honest, I started this rom-changing thing with an old but faithful Verizon's Samsung Fascinate I got from the States a while ago, but never worked on LG until now, 6 months ago I decided to pass on my guarantee and rooted the phone and started to tweak it, long story short, I couldn't get it to work on this KDZ app by LG so I was getting desperate, started trying with some ROMs and discovered in a thread (I think it was @Xemidra, or someone else referred someone to his Bootstack thread if I'm not mistaken, [and I'm actually looking for the post to thank him lol]), the thing is that after flashing BOOTSTACK_v1.4_D405N-10F while on your ROM the phone inmediatly recognized my sim card, now im happy... trying to learn little by little about Java and all this new world... I'd really love the camera to record video and that'll be it for your ROM sir... I haven't had not a single reboot, not a glitch or anything, it just gets slightly clumsy at times but it's almost noticeable...
so, THANK YOU SO MUCH!!!
Click to expand...
Click to collapse
Ahh yea, the bootstack issue! I included a little disclaimer about that in the OP I'm glad you are enjoying the ROM so far!
Sent from my LG-D415 using XDA Free mobile app
Absolutely love this ROM! Flashed clean 20150606 and than did the OTA update when the new build came out. Recovery script worked fine, automatic reboots, flashing, etc. just like regular OTA update. System UI crashed a couple of times after update, I think because of Nova Launcher. Went back to Trebuchet and it didn't crash since, not even a reboot. Haven't experienced any SIM problems. Enjoying it very much on my LG-D405n.
mnml_guy said:
Absolutely love this ROM! Flashed clean 20150606 and than did the OTA update when the new build came out. Recovery script worked fine, automatic reboots, flashing, etc. just like regular OTA update. System UI crashed a couple of times after update, I think because of Nova Launcher. Went back to Trebuchet and it didn't crash since, not even a reboot. Haven't experienced any SIM problems. Enjoying it very much on my LG-D405n.
Click to expand...
Click to collapse
That's great news! I'm glad you're enjoying the ROM so far. Thank you for the feedback!
Sent from my LG-D415 using XDA Free mobile app

Categories

Resources