[Q] can't see / connect to 5ghz wifi - Xperia Z3 Compact Q&A, Help & Troubleshooting

I seem to be unable to connect to a ac wifi network (5ghz) in fact, the SSID (broadcast enabled) doesn't even show up.
Adding it manually won't fix it either. Anyone else have that problem?
D5803

On what channel do you have your AC network and from where (country) do you have your phone? Could be the case you have set your AC to something not allowed in your country and so the phone does not "see" it. Just a guess.

wifi channel
sxtester said:
On what channel do you have your AC network and from where (country) do you have your phone? Could be the case you have set your AC to something not allowed in your country and so the phone does not "see" it. Just a guess.
Click to expand...
Click to collapse
agreed with this guy..you might wanna check what wifi channel your 5ghz is on..

My router is a US netgear r7000. I believe I have a EU z3c. The router region is locked into USA and I can't change it.
However I find it troubling that an international phone is unable to connect to all wifi channels.
Phones travel as do laptops. And my laptop connects to every wifi channel.
Anyway having said that, I'll use my friends router to test this theory. I'll report the results.

I doubt the router uses one of the upper channels, so it should work anyway.
http://en.wikipedia.org/wiki/List_of_WLAN_channels#5.C2.A0GHz_.28802.11a.2Fh.2Fj.2Fn.2Fac.29.5B17.5D
Try setting it to a fixed common channel, 56 for example, and check if it works then.

Actually the router was on auto and was using the upper channels. I changed it to channel 48, and the problem was solved.
Still disappointed though, albeit admittedly less so. Thanks lruwen

Please read the above mentioned Wiki in full and you'll have to agree that Sony can't be blamed for these problems. It's just down do regulations that different from one country to another and worse, they even keep changing.
Sent from my D5803 using XDA Free mobile app

rndinit0 said:
Actually the router was on auto and was using the upper channels. I changed it to channel 48, and the problem was solved.
Still disappointed though, albeit admittedly less so. Thanks lruwen
Click to expand...
Click to collapse
Thanks, this helped me. I had my router set for US use but my phone I just bought from Europe. Manually setting the 5Ghz channel to 48 did the trick.

varxx said:
Thanks, this helped me. I had my router set for US use but my phone I just bought from Europe. Manually setting the 5Ghz channel to 48 did the trick.
Click to expand...
Click to collapse
I'm happy to see that my post was helpful to someone

Related

[Q] Xperia T Wi-Fi problem

I just got an Sony Xperia T,
now I was trying to connect is to my router with the 5ghz-band, but the Xperia T can't find the network,
so then manually added the network, inserterd password, but then it says that the network isn't within reach,
but i'm sitting next to the router, the 2.4ghz-band works fine, and sony confirms that the phone should work with
the 5ghz-band in the white paper of the phone. Does anyone know how to solve this problem?
BTW, my router is a Netgear WNDR3700 Dual Band.
Dutchmann said:
I just got an Sony Xperia T,
now I was trying to connect is to my router with the 5ghz-band, but the Xperia T can't find the network,
so then manually added the network, inserterd password, but then it says that the network isn't within reach,
but i'm sitting next to the router, the 2.4ghz-band works fine, and sony confirms that the phone should work with
the 5ghz-band in the white paper of the phone. Does anyone know how to solve this problem?
BTW, my router is a Netgear WNDR3700 Dual Band.
Click to expand...
Click to collapse
On your router have you set it to dual band as a lot of the time they have it defaulted to 2.4 b/g so you'd need to change it to auto or whatever option allows all. On my Linksys it says 2.4 and 5 as an option in the dropdown. That would be the only reason I can think of. Have you tried with any other device to connect to your 5ghz network?
Likely a router compatibility issue. I can connect to a Linksys e4200 on 5ghz with no problems
Sent from my Xperia T
My Xperia T refuses to connect to my WiFi AP. It's only 2.4GHz, but according to the logs on the AP, it isn't even trying. On the phone side I very briefly see "Connecting" or similar on the AP list, then it reverts to Saved.
Log on phone is filled with entries like this:
Code:
I/wpa_supplicant( 565): wlan0: Trying to associate with 00:0c:42:XX:XX:XX (SSID='LFWnet' freq=2412 MHz)
I/wpa_supplicant( 565): wlan0: CTRL-EVENT-ASSOC-REJECT bssid=00:0c:42:XX:XX:XX status_code=1
MAC's partially XX'd
This happened on the stock Vodafone ROM, and still occurs on the Generic UK posted in General. I have tried WPA and WPA2, TKIP and AES, different channels, disabling N etc etc, still the same
Tried soft/hard reboots, wipes etc, nothing. It has connected to other public and protected AP's fine.
Am gutted as changing my AP to work around this problem is a no-go. Not had any problems with various other laptops and phones, including other SE/Xperia devices.
LadFromWales85 said:
This happened on the stock Vodafone ROM, and still occurs on the Generic UK posted in General. I have tried WPA and WPA2, TKIP and AES, different channels, disabling N etc etc, still the same
Tried soft/hard reboots, wipes etc, nothing. It has connected to other public and protected AP's fine.
Am gutted as changing my AP to work around this problem is a no-go. Not had any problems with various other laptops and phones, including other SE/Xperia devices.
Click to expand...
Click to collapse
I'm on generic UK rom and using a BT Home Hub without any problems. I've also got my old dLink wireless n router I use as a print server and it works fine with that too. My brother has a Sky router (Netgear I think) and that works fine.
I think you must be unlucky.
---------- Post added at 07:11 AM ---------- Previous post was at 07:07 AM ----------
Is your SSID published? Have you tried turning off all security on the router to see if you can connect then? (obviously I'm not suggesting you leave it unsecured but it is something to try.)
Also, posting your router details may give you an idea if others have been successful with that router before you splash any cash on a new one.
Hi, my Xperia T also is not able to connect with my e4200 5 GHz WiFi. My Laptop and a Samsung Phone works without any problems... I read (sorry I don´t remember the forum link) Sony did not enable the 5 GHz frequency because of driver issues. But if it works on some phones, maybe it´s a provider specific issue like the permanent bootloader lock?
Might be worth updating the firmware of your router?
Sent from my LT30p using xda app-developers app
I think I found the problem, the 5ghz band of my router doesn't have much range appearently, when i'm trying to find the 5ghz band outside of my house, i can't find it, I can only find it when i'm in my room, that's where the router stands, but the 2.4 ghz band has a much better range, I can connect to is almost 20-30 meters outside of my house. I'm wondering when Netgear is coming out with an update for my router, hopefully that will solve the problem, or maybe it will be solved when the Xperia T gets an update to Jelly Bean.
Dutchmann said:
I think I found the problem, the 5ghz band of my router doesn't have much range appearently, when i'm trying to find the 5ghz band outside of my house, i can't find it, I can only find it when i'm in my room, that's where the router stands, but the 2.4 ghz band has a much better range, I can connect to is almost 20-30 meters outside of my house. I'm wondering when Netgear is coming out with an update for my router, hopefully that will solve the problem, or maybe it will be solved when the Xperia T gets an update to Jelly Bean.
Click to expand...
Click to collapse
Hi there,
I've just bought the Xperia T and I'm pretty disappointed I can't use my home wifi.
I'm having exactly the same problem - I can see my connection and connect (sometimes) but it is a very poor connection, then after a minute or says "Not in range". If I go outside (which is actually closer to where the modem is) I can get data at an acceptable speed.
Sorry I'm such a noob but can you explain to me where the limitation lies and how I might fix it. Every other device used in the house works - even an old iphone 3gs - I'm surprised Sony's newest phone hasn't implemented technology that must have been in use for years.
Or if it is the modem - any ideas on how to change it.
Sorry - can't give you details - the modem is locked in the landlords garage - so I can't see what make it is.
Thanks for helping a noob.
I have faced the same problem with my TX when connecting to my AP.
I think there is WIFI problem in receiving the WIFI signal of security mode WPA2/WPA.
You can change the WIFI security mode to WEP or No security.
My device can connect the WEP mode WIFI.
Hope you can solve the problem!
pechnatunk said:
Hi there,
I've just bought the Xperia T and I'm pretty disappointed I can't use my home wifi.
I'm having exactly the same problem - I can see my connection and connect (sometimes) but it is a very poor connection, then after a minute or says "Not in range". If I go outside (which is actually closer to where the modem is) I can get data at an acceptable speed.
Sorry I'm such a noob but can you explain to me where the limitation lies and how I might fix it. Every other device used in the house works - even an old iphone 3gs - I'm surprised Sony's newest phone hasn't implemented technology that must have been in use for years.
Or if it is the modem - any ideas on how to change it.
Sorry - can't give you details - the modem is locked in the landlords garage - so I can't see what make it is.
Thanks for helping a noob.
Click to expand...
Click to collapse
Skylegend said:
I have faced the same problem with my TX when connecting to my AP.
I think there is WIFI problem in receiving the WIFI signal of security mode WPA2/WPA.
You can change the WIFI security mode to WEP or No security.
My device can connect the WEP mode WIFI.
Hope you can solve the problem!
Click to expand...
Click to collapse
Hmmm, that's strange - my modem is set to WEP and it's not really a connection problem but a signal strength problem. But like I said - no other device has this issue. It is hard to test - right now I'm accessing this from a cloud connection which is average compared to another I used this morning, though much better than at home. But I don't know how close I am to the transmitter right now.
Hello again,
I'm still trying to get to the bottom of this:
So my Xperia T can connect and use the wifi in my house fine IF I am within 2-3 metres of my router, which has the following settings -
O2 Wireless Box, model - TG585v7
Software release - 8.2.7.7
Boot loader 1.0.0
Interface Type: 802.11b/g
Band: 2.4G Hz (This unfortunately cannot be changed)
It is currently set to WEP security but when I changed to WPA-2 there was still no change - could only connect when a couple of metres away.
Also even when holding my phone 10cm away from the router I still only get a "Good" connection. So I started to think it must be my phone that is faulty - I've been to coffee shops and picked up the free Cloud wifi ok, though one kept dropping in and out. And I have been into mobile phone shops testing their wifi and it connects.
But yesterday I went to Carphone Warehouse and compared to one of their demo Xperia T phones - the demo was connected to their wifi fine yet my phone could not even "see" their connection - I was sure it was my phone.
But now I'm really confused - today I went to a different Carphone warehouse - there was no demo phone but I picked up their signal and the quality was "Excellent" - something I'd never seen before.
My phone is locked to T-Mobile - can a carrier locked phone somehow restrict access to certain routers?? Seems very weird to me, though I am quite a novice at all of this.
Any help would be much appreciated.
Thanks.
locked phone won't block AP access... maybe backup your data and try master reset.. factory reset... don't need erase sd card.
Sent from my LT29i using xda app-developers app
Are you using the T-Mobile WiFi app? If so delete your connection from settings, then set your home WiFi via the T-Mobile app, it may be connecting to the open one not your full one.
If you don't use the app, I would change the channel on the router and try that.
Sent from my LT30p using xda app-developers app
xperia t
I use Xperia T in Turkey but I bought ıt in Bosnia. I checked my phone's ID and ın myphone has got Vodafone Wi-Fi .. When My phone's Wi-Fi is online then suddenly myphone begin afresh itself. What is the problem please help me ..
I had the same problem then I discovered it happen only in stock firmware or stock based ROM. Try Flashing CM10 or CM10.1. Your problem will likely be solved.

[Q] Is there a way to change internet sharing WI-Fi channel?

Hi!
I live in a area where there are a lot of WI-Fi networks. My Nokia Lumia 820 seems to only use WI-FI channel 6 while using internet sharing as do 6 other routers nearby. This causes constant connection dropouts with my Macbook pro. Is there a hack to change to another broadcasting channel with a little less interference?
Thanks for your help in advance!
Miksii said:
Hi!
I live in a area where there are a lot of WI-Fi networks. My Nokia Lumia 820 seems to only use WI-FI channel 6 while using internet sharing as do 6 other routers nearby. This causes constant connection dropouts with my Macbook pro. Is there a hack to change to another broadcasting channel with a little less interference?
Thanks for your help in advance!
Click to expand...
Click to collapse
Router allways sets up the channel, and internet sharing dosn't allows to choose it.
one option would be to setup an intermediate router as gateway with other configured channel.
Miksii said:
Hi!
I live in a area where there are a lot of WI-Fi networks. My Nokia Lumia 820 seems to only use WI-FI channel 6 while using internet sharing as do 6 other routers nearby. This causes constant connection dropouts with my Macbook pro. Is there a hack to change to another broadcasting channel with a little less interference?
Thanks for your help in advance!
Click to expand...
Click to collapse
Sorry, its set in the registry and that can't be changed yet. I would hope that it could be included in GDR3 or even 8.1/Blue. That would get real annoying.
Also, any chance of those other connections are unencrypted? You could log onto them and change some of them to a different channel as most people barely know the default username and password on their router. ?
I don't know if some others in the community consider this wardriving,
but it involves accessing someone elses WiFi.
Sent from my RM-860 (Lumia 928) using the OFFICIAL Tapatalk app.

Chromecast will not connect to my TELUS ROUTER

Chromecast wont connect to my telus router (Actiontec V1000H). I can't see any option to enable/disable AP Isolation. Is there any solution for this?
fixed:laugh:
2237 9525694
mydrl said:
Chromecast wont connect to my telus router (Actiontec V1000H). I can't see any option to enable/disable AP Isolation. Is there any solution for this?
fixed:laugh:
Click to expand...
Click to collapse
How?
try changing the wifi channel the router uses
mydrl said:
Chromecast wont connect to my telus router (Actiontec V1000H). I can't see any option to enable/disable AP Isolation. Is there any solution for this?
fixed:laugh:
Click to expand...
Click to collapse
How did you fix this?
MadBob said:
try changing the wifi channel the router uses
Click to expand...
Click to collapse
Good advice.
Remember that the WiFi bands (channels) are not exactly the same between countries. So if you're in a non-US country and your router happens to choose a channel that is not available in the US, Chromecast may not detect your wireless AP.
But Telus is Canadian, and Canada has the same WiFi channels as the U.S. (Canada and the U.S. necessarily share identical radio spectrum allocation).
DJames1 said:
But Telus is Canadian, and Canada has the same WiFi channels as the U.S. (Canada and the U.S. necessarily share identical radio spectrum allocation).
Click to expand...
Click to collapse
Didn't know that. Thanks! Still applies to other countries though. I think Channel 13 is one of the channels that applies to Europe but not US. I should put it in the FAQ...
EDIT: Seems there's far less exclusion than I thought... but added a note in the FAQ just in case.
http://en.wikipedia.org/wiki/List_of_WLAN_channels
So I can get through the setup phase up until the Chromecast tries to connect to my wifi network. I get a message saying it couldn't connect, and when I click the link in the message it brings me to a page that mentions AP filtering, UPNP enabling and .NET 3.5. I checked and UPNP is enabled, and I can't find an option for AP filtering (I have the Actiontech V1000h). I am using a Macbook pro.
Kipp34 said:
So I can get through the setup phase up until the Chromecast tries to connect to my wifi network. I get a message saying it couldn't connect, and when I click the link in the message it brings me to a page that mentions AP filtering, UPNP enabling and .NET 3.5. I checked and UPNP is enabled, and I can't find an option for AP filtering (I have the Actiontech V1000h). I am using a Macbook pro.
Click to expand...
Click to collapse
In some cases you have to go through a couple of times. I just reset my Chromecast to test a few things and had to go through the setup twice before it connected to my WiFi.
Chromecast in Canada, on Telus
A friend lent me his chromecast. He uses an iphone and Shaw cable. I use a Nexus 4, and have Telus as my internet provider.
It was a bear trying to get chromecast to work. Tried 5 separate days. Got it to work and i could watch netflix/youtube on it about 3 times and played with it for a couple of hours each. That's the success.
The fail is that I had to trouble shoot more then 4+ hours to get it to work those 3 times. Reboot the chromecast. Reboot the router. Reboot my Nexus 4. Try my wife's Nexus 4. Try the Nexus 7 tablet. It was a horrible experience. I got the AP recommendation like the earlier post in this thread. I tried that. Tried calling telus and signed into my router to check that those settings were correct. As far as I understand it's a gateway 11n wireless router.
So my conclusion is change my internet provider to Shaw unless someone has a smart solution to this problem. The router says it's a 50ghz signal? So it isn't the 2.4vs 5.0 ghz signal problem that I've googled and read about.
Please provide some brains to my situation. I've used all of mine up.
bhiga said:
In some cases you have to go through a couple of times. I just reset my Chromecast to test a few things and had to go through the setup twice before it connected to my WiFi.
Click to expand...
Click to collapse
Still not fixed.
So I took the plunge and bought one. Maybe it'd be different than my friends. Looks like this is a me problem. The chromecast still doesn't work. I thought it might be the tv that it's plugged into? Maybe shielding the chromecast from the wifi? I don't know. Will trouble shoot with a different tv or a long hdmi cable that will get the chromecast out from behind the tv. Maybe that'll help.
johnson2423 said:
So I took the plunge and bought one. Maybe it'd be different than my friends. Looks like this is a me problem. The chromecast still doesn't work. I thought it might be the tv that it's plugged into? Maybe shielding the chromecast from the wifi? I don't know. Will trouble shoot with a different tv or a long hdmi cable that will get the chromecast out from behind the tv. Maybe that'll help.
Click to expand...
Click to collapse
TVs are great at blocking/scrambling radio signals.
Use the included HDMI extender. If that doesn't help (enough), get an HDMI extension and move Chromecast away from the TV. One of mine is on a 10-foot HDMI extension. The other is connected upstream of a another device that connects to my TV, so both of my Chromecasts are at least a foot away from its associated TV.
johnson2423 said:
So I took the plunge and bought one. Maybe it'd be different than my friends. Looks like this is a me problem. The chromecast still doesn't work. I thought it might be the tv that it's plugged into? Maybe shielding the chromecast from the wifi? I don't know. Will trouble shoot with a different tv or a long hdmi cable that will get the chromecast out from behind the tv. Maybe that'll help.
Click to expand...
Click to collapse
It could be a few things not related to the router directly but related in how the Router connects to your ISP.
So a couple of questions...
What kind of service is your ISP? (DSL, CABLE, OTHER)
What Public IP does your router report? (Usually found on the status page that shows connection data) If it starts off 192.168 then your Modem is doing a double nat translation and you need to call your ISP and tell them you want the Modem to be put into gateway mode and just pass a public IP to your router.
Does the CCast actually connect to the Router but not work or will it not connect at all period? If it doesn't connect at all it is possible you need to change the Security method used to WPA or WEP. To test shut off security alltogether and try to connect the CCast. If there is currently NO security try putting WPA on and trying again (but it should work on an open AP)
fixed...
Asphyx said:
It could be a few things not related to the router directly but related in how the Router connects to your ISP.
So a couple of questions...
What kind of service is your ISP? (DSL, CABLE, OTHER)
What Public IP does your router report? (Usually found on the status page that shows connection data) If it starts off 192.168 then your Modem is doing a double nat translation and you need to call your ISP and tell them you want the Modem to be put into gateway mode and just pass a public IP to your router.
Does the CCast actually connect to the Router but not work or will it not connect at all period? If it doesn't connect at all it is possible you need to change the Security method used to WPA or WEP. To test shut off security alltogether and try to connect the CCast. If there is currently NO security try putting WPA on and trying again (but it should work on an open AP)
Click to expand...
Click to collapse
Service is Telus DSL.
Solution: I changed the security settings. It still tries to stop the CCast from talking to my phone once in a while, but I just log into my router and log into the firewall settings. The firewall settings are "high, medium, low, NAT". It started working once I started turning it off of NAT and onto Medium or High.
I don't know why this is the solution, but it is a solution. I suspect that either Telus will fix the prolbem for everyone else or this thread will become popular. Now CCast is coming to Canada. So either Telus fixes it or there'll be a lot of searching leading to this post.
As a reminder, a friend of mine on telus never toughed his firewall settings and never had a problem with using his CCast. Go figure.
johnson2423 said:
Service is Telus DSL.
Solution: I changed the security settings. It still tries to stop the CCast from talking to my phone once in a while, but I just log into my router and log into the firewall settings. The firewall settings are "high, medium, low, NAT". It started working once I started turning it off of NAT and onto Medium or High.
I don't know why this is the solution, but it is a solution. I suspect that either Telus will fix the prolbem for everyone else or this thread will become popular. Now CCast is coming to Canada. So either Telus fixes it or there'll be a lot of searching leading to this post.
As a reminder, a friend of mine on telus never toughed his firewall settings and never had a problem with using his CCast. Go figure.
Click to expand...
Click to collapse
Well if the Telus was set to NAT perhaps Double Nat Translation was the issue.
DO you have another router connected to your modem or is this one of those all in one Hybrids supplied by the ISP?
Asphyx said:
Well if the Telus was set to NAT perhaps Double Nat Translation was the issue.
DO you have another router connected to your modem or is this one of those all in one Hybrids supplied by the ISP?
Click to expand...
Click to collapse
I have a friend that is struggling with this as well. While setting up the WiFi connection between the chromecast and the router (the Actiontec V1000H - which is a modem/router combo if that helps). The chromecast will see the WiFi, but it seems to time out while trying to connect to the router.
I did find a comment on a blog somewhere (sorry, I forget where) that suggests unchecking the "IGMP snooping enabled" option in the router (Advanced Settings>IGMP Setting). Once this was done, the chromecast connected to the WiFi without any issues and we were able to stream it without any issues.
However after going out for dinner we had major issues trying to connect to the WiFi on our phones and his laptop (laptop would try to connect to the WiFi but continually fail). It seems like this is a temporary fix at best.
The only permanent solution I can think of at the moment is to go buy a new router that is listed as having no issues on the chromecast compatibility list... Which kind of defeats the whole purpose of having the chromecast as an economic way to stream content to your big screen.
Buy a better router
I don't see why IGMP should have any affect on being able to login and connect.
I Can see it being a problem with streaming but not connection.
IS this an ISP provided Modem/Router? How many devices are connecting wirelessly?
Check settings for IGMP Proxy, Try changing that setting whatever it is but it should probably be disabled (Still don't think this would affect connection but it's worth checking)
Check if UPnP Is enabled (again not really connection related but it does need to be enabled for CCast)
I personally prefer to use a two device setup with separate Modem (in Bridge Mode) and Router....This way the Modem protects the router from the outside world and even if the Modem goes bad the Network still functions properly.
And I pretty much stay away from anything that isn't a Linksys or Netgear product as far as Routers are concerned.
There are a bunch of Actiontec models that are listed as incompatible with CCast on the google site so it's obvious that something about their firmware is not CCast friendly.
So the the previous poster may actually have made a good suggestion in the long run! LOL
I'm using the telus actiontech router with chromcast with no issues....
its a pretty crappy router though and it seems telus disabled the ability for bridge mode in the latest firmware... has anyone found a solution to this so i can buy a better router?
Sent from my Nexus 7 using Tapatalk
nolook said:
I'm using the telus actiontech router with chromcast with no issues....
its a pretty crappy router though and it seems telus disabled the ability for bridge mode in the latest firmware... has anyone found a solution to this so i can buy a better router?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
As long as double NAT doesn't cause you problems, you can
Assign the new router's WAN port to an address in the ISP router's LAN range
Set the new router's gateway to the ISP router's LAN address
Connect the two routers LAN port to LAN port
Have all your wired and wireless clients connect to the new router.

Issues with new TWC modem/router

Hi all, while thinking that faster internet would be a good thing, it seems that I have managed to break chromecast compatibility with my network. Previously I had a Netgear router that worked perfectly, but when we got an upgrade to TWC's new "Extreme Internet" they installed a new WiFi router/modem hybrid that I cannot seem to connect to. I get the message that it is connected to the network but not the internet. Ap isolation. Is disabled, but I cannot find the plug and play feature anywhere in the network settings. Has anyone found a work around?
Sent from my SAMSUNG-SGH-I317 using Tapatalk
jmikeb92 said:
Hi all, while thinking that faster internet would be a good thing, it seems that I have managed to break chromecast compatibility with my network. Previously I had a Netgear router that worked perfectly, but when we got an upgrade to TWC's new "Extreme Internet" they installed a new WiFi router/modem hybrid that I cannot seem to connect to. I get the message that it is connected to the network but not the internet. Ap isolation. Is disabled, but I cannot find the plug and play feature anywhere in the network settings. Has anyone found a work around?
Click to expand...
Click to collapse
If you can give us the exact make and model we might be able to help more.
BTW, TWC changed their policy a few years back and now allow approved customer-owned modems which will save you the modem rental. They used to not charge for the modem rental but also not let you use your own. Installed a Motorola SB6141 for my relative and it's been working great with the Netgear WNDR3700 I put there.
No Chromecast yet because I haven't been by to visit...
You could always use your own modem with twc, just that most people did not know that. Like previously mentioned, more details are needed in order to further assist you. Make and model(tg862g, ddw3611, dvw32011b???). More than likely you just need to call and talk with level 3 tech support. I personally used my own router behind the modem because I do a bit more than normal with my router.
jmikeb92 said:
Hi all, while thinking that faster internet would be a good thing, it seems that I have managed to break chromecast compatibility with my network. Previously I had a Netgear router that worked perfectly, but when we got an upgrade to TWC's new "Extreme Internet" they installed a new WiFi router/modem hybrid that I cannot seem to connect to. I get the message that it is connected to the network but not the internet. Ap isolation. Is disabled, but I cannot find the plug and play feature anywhere in the network settings. Has anyone found a work around?
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
I went through Hell on Christmas Eve with Time Warner....
They have a new Modem/Router they are using....When connected to a personal Router it does a double Nat translation which really doesn't work at all.
Your lucky if you even get Internet access on a Computer with it.
Check your router and see what IP address it has under internet connection. It should not be 192.168.0.x
If it is not an outside IP you need to call support and tell them you need your Router to breach the Modem and have them shut off all ROUTER capability on their Device so that all it does is pass a public IP to whatever is connected to it.
If you get your phone service from Time Warner as well better call on a Cell Phone because they will drop the phone call the second they mess with their Modem/Router and you will suffer through Groundhog day explaining it to the next guy from scratch!
Well guys I solved my own problem in a way. I disabled the wireless broadcast from the TWC Arris router and just connected my old NetGear ( old as in 2 months old) and it seems to work perfectly now. And the installer said, " You won't need to use your old one because this box is like commercial grade bro."
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Glad to hear. The wireless modem you have is indeed a great modem and you could use that alone but it is easier to just use your own. The installer more than likely wasn't on the up and up about the more technical aspects of the modem. You can't knock him for that part as the techs are not trained on a lot of the extra features of the modem. I only know this because I may or may not work for the company(need to keep work out of forums).
shelby04861 said:
I only know this because I may or may not work for the company(need to keep work out of forums).
Click to expand...
Click to collapse
I usually go with "I have a lot of experience with these products"

Chromecast bought in the US will not connect to my new router here in Europe

Hi!
Have a CC that bought in the US that have worked like a charm in my Swedish home. Until now. Got a new Netgear r7000 Nighthawk router (which flies) and suddenly my chromecast gives an error saying that the unit is purchased in a different country than the router and will not work. And sure enough, it doesn't. It will not show the network at all.
Familys two other CC:s that are bought in Sweden works just fine with the new router.
When I changed the wireless region on the router to USA the US chromecast works (and the Swedish ones too). But then my wireless HP printer suddenly will not connect instead. Damn if you do....
So please help! Is there any setting or adjustment I can make on the router that will make both my US chromecast and my HP printer happy?
Thanks for any input on this matter!
The only thing I can think of is Europe has more channels Wi Fi can use than the US has (Maybe that is reversed but it makes sense in this case)
Perhaps your router is picking Channel automatically and picking a Channel the US CCast can't use.
Try Manually setting the WiFi Channel on the router to a number between 1-11.
Those are supported by the US.
See if that works.
And that was the problem! The router was running on channel 13. After manually picking lower channel it works.
Thanks for helping me out with this!
Also got the printer connected after lowering the speed on 2.4 network.
Skickat från min Nexus 6P via Tapatalk
Lugnofin said:
And that was the problem! The router was running on channel 13. After manually picking lower channel it works.
Thanks for helping me out with this!
Also got the printer connected after lowering the speed on 2.4 network.
Skickat från min Nexus 6P via Tapatalk
Click to expand...
Click to collapse
Glad you got the CCast Sorted...
Printer should not have needed anything other than a reboot or reconnect to the router to work after you changed the channel.
But if all is working don't try and fix it further! LOL

Categories

Resources