I was thinking about getting a Moto X 2014 and was wondering what the plastic back cover is like?
I do not want the leather since it quick gets used and not into wood so plastic is the default choice for me.
I could find any details as to the Moto X 2014 back plastic cover feels, looks like up close and is it sued like or is it a hard plastic feel like the 2013?
Did anyone order the back cover in plastic and how is it?
I have the black back and it has a soft touch coating. It has a mild rubbery feel too it almost. It's great.
_MetalHead_ said:
I have the black back and it has a soft touch coating. It has a mild rubbery feel too it almost. It's great.
Click to expand...
Click to collapse
Thanks Metalhead! Just what I wanted to know!
Do you find the phone quite slippery to hold?
Its nice to hold but it feels way to easy to drop. I was hoping the black back would have been a bit more grippy.
_MetalHead_ said:
I have the black back and it has a soft touch coating. It has a mild rubbery feel too it almost. It's great.
Click to expand...
Click to collapse
_MetalHead_ said:
I have the black back and it has a soft touch coating. It has a mild rubbery feel too it almost. It's great.
Click to expand...
Click to collapse
Exactly! I found it to be an ideal material for phone because it's very solid, not prone to scratches and far more durable than leather or wood.
And it's look good, not cheap. This is not plastic, like iPhone 3gs back but polycarbonate.
Judge584 said:
Exactly! I found it to be an ideal material for phone because it's very solid, not prone to scratches and far more durable than leather or wood.
And it's look good, not cheap. This is not plastic, like iPhone 3gs back but polycarbonate.
Click to expand...
Click to collapse
Thanks for seconding that it solid not cheap and well made. I thinking of going all "White" on the Moto X! Kind of had it with the all black models. LOL! I might be sorry and be clean it a lot but it suppose to be a trendy type phone anyways - fashion and all so I going go all out - fashion wise! Of course; when I order; I probably be conservative and go all black again! That the only two colors I know; so motomaker does not seem to change my mind any!
Harry Wild said:
Thanks for seconding that it solid not cheap and well made. I thinking of going all "White" on the Moto X! Kind of had it with the all black models. LOL! I might be sorry and be clean it a lot but it suppose to be a trendy type phone anyways - fashion and all so I going go all out - fashion wise! Of course; when I order; I probably be conservative and go all black again! That the only two colors I know; so motomaker does not seem to change my mind any!
Click to expand...
Click to collapse
I went all black with mine, but I'm thinking about exchanging it for black leather with either green or blue accents. I'm kinda getting tired of all black phones too.
I went all black : because you cannot see sensors of the front side. White model looks ugly because of this.
Plastic is solid
Harry Wild said:
I was thinking about getting a Moto X 2014 and was wondering what the plastic back cover is like?
I do not want the leather since it quick gets used and not into wood so plastic is the default choice for me.
I could find any details as to the Moto X 2014 back plastic cover feels, looks like up close and is it sued like or is it a hard plastic feel like the 2013?
Did anyone order the back cover in plastic and how is it?
Click to expand...
Click to collapse
Got mine today. White/white. Not slippery.
I'm coming from an S4, and this feels much more solid and permanent. Feels thicker, but of course I don't know that, because I can't take off the back. But it certainly does not feel cheap, compared to the S4. (Maybe not a fair comparison, as S4's back was made to come off, which I liked. So for me it's a trade off.)
Related
Does anybody have this? It looks really sharp (and I'm about to order one) but the only thing holding me back is the top/bottom. It looks like it doesn't cover it properly. Whenever I've dropped a phone and got some scuffs, it's always the top and bottom that take the brunt of it.
If you have this case, could you post some pics? Or provide some insight to the protection? Here is a link to it on Amazon:
http://www.amazon.com/Incipio-MT-143-Feather-Motorola-Bionic/dp/B005DQF7TU
i had this case for a few weeks now. i'm pretty happy with it. phone sits nice and snug inside the case with a nice feel to the material and barely adds any dimensions it.
the front extends a bit past the edge of the phone so that its raised off your glass if put face down. the top and bottom is exposed but if it falls on any flat surface the edges of the case sticks out far enough that it'll hit the case first and not the phone itself. not sure if the case will pop out on a fall and don't intend to find out, but it fits snug enough that sometimes it takes the back battery door off when i remove the case. screen protector that comes with the case is complete junk.
envizion58 said:
i had this case for a few weeks now. i'm pretty happy with it. phone sits nice and snug inside the case with a nice feel to the material and barely adds any dimensions it.
the front extends a bit past the edge of the phone so that its raised off your glass if put face down. the top and bottom is exposed but if it falls on any flat surface the edges of the case sticks out far enough that it'll hit the case first and not the phone itself. not sure if the case will pop out on a fall and don't intend to find out, but it fits snug enough that sometimes it takes the back battery door off when i remove the case. screen protector that comes with the case is complete junk.
Click to expand...
Click to collapse
Ok ok, I like. Can you post some pics? I've seen a bunch of pics online, but I want a clear view of the top and bottom.
Sent from my DROID BIONIC using xda premium
i don't have pics but if you go to this forum post that i started, another guy gave a pretty detailed review with good pics.
apparently i can't post links yet.
here is the full address
forums.androidcentral.com/bionic-accessories/117782-incipio-feather-case.html
envizion58 said:
i don't have pics but if you go to this forum post that i started, another guy gave a pretty detailed review with good pics.
apparently i can't post links yet.
here is the full address
forums.androidcentral.com/bionic-accessories/117782-incipio-feather-case.html
Click to expand...
Click to collapse
Thanks for the link, just checked it out. I'm still torn. I absolutely LOVE the look and sleekness of it, but I know as soon as I buy it I'll drop my phone and scuff the top. This would anger me
I dropped my x2 three days after purchase and scuffed it all up right at the top. I haven't let this Bionic be naked once - it was covered before I left the store.
It's a damn shame too - because this phone is sexy naked.
Decisions decisions...
Sent from my DROID BIONIC using xda premium
I have the Incipio Feather and didn't like how the phone was exposed on the bottom either. I also didn't like the feel of the phone at the bottom with the case on.
I bought a couple Cruzer Lite cases instead and really like them. Check Amazon.
I bought the incipio feather a few weeks ago and its by far the best case out there if you like to keep the curve of the phone and you dont want to add an siginificant bulk
dendthoff said:
I have the Incipio Feather and didn't like how the phone was exposed on the bottom either. I also didn't like the feel of the phone at the bottom with the case on.
I bought a couple Cruzer Lite cases instead and really like them. Check Amazon.
Click to expand...
Click to collapse
Which Cruzer Lite cases did you get?
I for one, love the Feather case...but alas, I contacted Incipio and they have no plans to make one for the extended battery. Does anyone know of a case that is similar to the feather, but fits the extended battery?
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
efingguy said:
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
Click to expand...
Click to collapse
Thanks for the post - good read.
I researched the case you spoke of and it's very similar to the Verizon gel case I currently have. It definitely provides the right amount of protection, but I'm looking to get that "sexy naked feel" the unprotected Bionic provides.
Here is what I'm thinking. I'm going to order the matte black phantomskinz skin. Cover the top and bottom (the only parts exposed from the incipio feather case) and then rock the incipio. Might be slightly ghetto, but I'm sure I can get it looking good. That will give me the lightweight feel of the incipio case with some protection from nicks and scratches on the top and bottom.
I'll post pics when I make it happen.
I would definitely invest a little more for the balance of sexy and protection, this was just the quick fix for now but its turning into a permanence since it really tops the silicon gels.. pictures just don't do it justice.
youtube search tpu-cases.com review
I've just become a huge fan of TPU after picking this up. I'm not a big fan of high gloss or clear/patterned designs, the matte black is definitely a sexy finish.
efingguy said:
I would definitely invest a little more for the balance of sexy and protection, this was just the quick fix for now but its turning into a permanence since it really tops the silicon gels.. pictures just don't do it justice.
youtube search tpu-cases.com review
I've just become a huge fan of TPU after picking this up. I'm not a big fan of high gloss or clear/patterned designs, the matte black is definitely a sexy finish.
Click to expand...
Click to collapse
You sure love your TPU. Lol. Few questions:
Have you seen the Verizon gel case that speak of?
How similar/different is it? Size wise? Obviously one is matte and one is glossy.
Just curious, cause that's what I rock, and from pics it seems the matte vs. glossy is the only real noticeable difference.
Sent from my DROID BIONIC using xda premium
Just ordered the incipio feather. I'll give my opinions in two days.
mistawolfe said:
You sure love your TPU. Lol. Few questions:
Have you seen the Verizon gel case that speak of?
How similar/different is it? Size wise? Obviously one is matte and one is glossy.
Just curious, cause that's what I rock, and from pics it seems the matte vs. glossy is the only real noticeable difference.
Sent from my DROID BIONIC using xda premium
Click to expand...
Click to collapse
Yeah, when the Droid X came out, another friend of mine got the Verizon case at the store. The ones we are talking about are the silicone gel cases that are really flexible and rubbery. I would almost describe it as sticky as over time it gets softer and attracts more lint. These slip off the phone easily sometimes. The width that it adds is pretty minimal since it is a floppy material, and a hard shell case is just the opposite in that respect. The hard shell cases in my experience fit the phone real nice, and are not floppy at all, and add minimal width. When you drop a hard shell though, the hardshell cracks over time and it doesnt really distribute the shock. But its to your preference and likelihood of dropping your phone I guess. I'm just really backing how cheap the TPU cases are and how reliable the material is. It seriously is something you have to see to beleive. Let me know how the incipio is!
efingguy said:
Yeah, when the Droid X came out, another friend of mine got the Verizon case at the store. The ones we are talking about are the silicone gel cases that are really flexible and rubbery. I would almost describe it as sticky as over time it gets softer and attracts more lint. These slip off the phone easily sometimes. The width that it adds is pretty minimal since it is a floppy material, and a hard shell case is just the opposite in that respect. The hard shell cases in my experience fit the phone real nice, and are not floppy at all, and add minimal width. When you drop a hard shell though, the hardshell cracks over time and it doesnt really distribute the shock. But its to your preference and likelihood of dropping your phone I guess. I'm just really backing how cheap the TPU cases are and how reliable the material is. It seriously is something you have to see to beleive. Let me know how the incipio is!
Click to expand...
Click to collapse
My gel case from Verizon does get very sticky and greasy. Makes me mad.
Sent from my DROID BIONIC using xda premium
Update..
I just noticed my desk dock had a "padding"... it totally fits with this case on!
Got this case today.
Initial impressions:
*Absolutely love the thinness of it. It feels like I don't have a case on. Looks sharp.
CONS:
*No top and bottom protection (I knew this before purchase)
*Back gets smudgey
efingguy said:
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
Click to expand...
Click to collapse
You know what I just realized? When I wrote this post, my phone was in a TPU case. Lol.
I got the smoky argyle one, and definitely loved the appearance and lightweight feel of it. I thought it felt a little janky by the power button (was pretty loose) and there were some leftover nubs from where it was cut - clearly visible against the black background of the screen.
I got some black sandpaper and sanded it down, but it left the case looking like garbage. I got it for $2.95 + $2.95 shipping, so I'm not complaining. I might end up ordering another.
I just got this case, iridescent red one, I agree the top and bottom is exposed but the look and feel of it is very nice. It is very sexy looking as well, doesn't cover anything that shouldn't be covered like holes etc.
The main reason I got this one was that someone said it would fit in the Moto car dock, and it does. However, if I hit a bump some times it pops up justttttt enough to stop charging. Pop it back down and it stays for a while again.
Funny no one else ever mentions this but I live in Florida, and every single black droid I have owned (1, 2, 2global, and now bionic) overheats when going on long trips and using Nav. Can't charge it when it overheats. I wanted to go with Iridescent Red to maybe reflect some of that heat...hope it works.
Also, red and black just go together....
Any MOTO X bumper suggestions...other than this one here: http://www.tvc-mall.com/details/For-Motorola-Moto-X-XT1055-PC-TPU-Hybrid-Bumper-Frame-Black-MHC-XT1058-01A/?gclid=CPGQy4avsLkCFdFDMgod6jYAaA It looks like from China...don't want to wait that long.
Lol that looks just like the griffin reveal or incase proshell just without the clear plastic back. I just got the reveal yesterday, it's a very nice case. That would be my recommendation.
http://www.amazon.com/gp/product/B00EI7CX1A/
I don't recall whether I got the 'frost' or the 'smoke' variation (they changed the listing, so where I bought now goes to another product of theirs for the X), but whatever it is looks good with my 'cement' back, and is hardly visible.
http://www.amazon.com/Hyperion-Motorola-Protector-Compatible-Packaging/dp/B00CXM3RCQ/
I hope an aluminum bumper pops out soon
Sent from my XT1058 using xda app-developers app
Just ordered a black one to show off my turquoise back and white front with black accents
L
Sent from my XT1058 using XDA Premium 4 mobile app
Rask40 said:
I don't recall whether I got the 'frost' or the 'smoke' variation (they changed the listing, so where I bought now goes to another product of theirs for the X), but whatever it is looks good with my 'cement' back, and is hardly visible.
http://www.amazon.com/Hyperion-Motorola-Protector-Compatible-Packaging/dp/B00CXM3RCQ/
Click to expand...
Click to collapse
From the picture it looks like that case actually retains use of the Motorola dimple. Of course, if the back plastic is raised enough, it'll be annoying to use anyway. How's the use of the back with the case? I'd like to protect the back but still like the feel of holding it w/dimple.
Yazzinit said:
From the picture it looks like that case actually retains use of the Motorola dimple. Of course, if the back plastic is raised enough, it'll be annoying to use anyway. How's the use of the back with the case? I'd like to protect the back but still like the feel of holding it w/dimple.
Click to expand...
Click to collapse
It does retain the dimple and doesn't try to jam their logo onto your design either (several other cases like to put their brand logo down near the bottom, which is an annoyance in my eyes!). I like the case, find that the phone still retains it's "easy to hold" characteristics. Sorry for the delay in responding, wasn't getting my notifications for some reason.
Rask40 said:
It does retain the dimple and doesn't try to jam their logo onto your design either (several other cases like to put their brand logo down near the bottom, which is an annoyance in my eyes!). I like the case, find that the phone still retains it's "easy to hold" characteristics. Sorry for the delay in responding, wasn't getting my notifications for some reason.
Click to expand...
Click to collapse
i have the moto X and just a case from verizon. what is this "dimple" everyone keeps talking about?
yamaha83 said:
i have the moto X and just a case from verizon. what is this "dimple" everyone keeps talking about?
Click to expand...
Click to collapse
the place where the moto logo is on the back of the phone is slightly concave (i.e. dimple). Many people think the dimple feels good when holding the phone or taking pictures. Just a solid spot to put your finger when you are holding the phone.
jayboyyyy said:
the place where the moto logo is on the back of the phone is slightly concave (i.e. dimple). Many people think the dimple feels good when holding the phone or taking pictures. Just a solid spot to put your finger when you are holding the phone.
Click to expand...
Click to collapse
ahhh i see.... my case for sure does not have that... hmmm, i never held the phone without the case and i kind of like the dimple too...lol
yamaha83 said:
ahhh i see.... my case for sure does not have that... hmmm, i never held the phone without the case and i kind of like the dimple too...lol
Click to expand...
Click to collapse
i have gotten mine yet but most people say for some odd reason they just really like the dimple. it's the small things that count.
Just got the Hyperion case in, it's perfect. Dimple fully useable, yet protects the back. Cutouts are perfect. Can't ask for anything more for $7 off of Amazon
Just bit the bullet and got the chinese bumper case from TVC. I figured for $4 and some change it was worth it to try. Plus, I don't want any coverage of the back of the phone so i wasn't willing to compromise on that. Will try to report back on my impressions.
awperk said:
Just bit the bullet and got the chinese bumper case from TVC. I figured for $4 and some change it was worth it to try. Plus, I don't want any coverage of the back of the phone so i wasn't willing to compromise on that. Will try to report back on my impressions.
Click to expand...
Click to collapse
I also ordered a couple of them to see how they fit and look. Hope we actually get them.
I ended up going for the incase proshell because it had the dimple, but the way the cutout is renders the dimple almost useless. additionally, the sides of the phone are the same material as the back (slippery plastic) but i thought they were rubber. really only the lip is rubber and the lip is tiny at that. can you comment on if the griffin reveal has rubber sides and a decent sized lip?
_MetalHead_ said:
Lol that looks just like the griffin reveal or incase proshell just without the clear plastic back. I just got the reveal yesterday, it's a very nice case. That would be my recommendation.
Click to expand...
Click to collapse
tbebo said:
I also ordered a couple of them to see how they fit and look. Hope we actually get them.
Click to expand...
Click to collapse
awperk said:
Just bit the bullet and got the chinese bumper case from TVC. I figured for $4 and some change it was worth it to try. Plus, I don't want any coverage of the back of the phone so i wasn't willing to compromise on that. Will try to report back on my impressions.
Click to expand...
Click to collapse
Please do let us know how it is. I cannot believe no company has made any bumper for us yet One of the selling point of Mx is the design. Why do people want to cover it up? So bumper makes the most sense... is it just me
Also, Ebay is selling that as well...seems to be shipped from TX
http://www.ebay.com/itm/Hybrid-Plastic-Backless-Bumper-Case-for-Motorola-Moto-X-/231052501660?pt=US_Cell_Phone_PDA_Cases&var=&hash=item35cbcd629c
i picked up this case but on ebay from a US seller
http://www.amazon.com/Cimo-Motorola-S-Line-Flexible-Cover/dp/B00EB3FZH0
reviews are pretty good and I also already have this same style case with the S for a nexus 7 on ebay (bought it for $4 and its actually a pretty decent case, has ridges for grip on side)
actually found the moto -x version for $3 free shipping on ebay from a US seller as well. for $3 why not.
$3 ebay link for the cimo s-line case below.
http://www.ebay.com/itm/251325198541
asylvia said:
I ended up going for the incase proshell because it had the dimple, but the way the cutout is renders the dimple almost useless. additionally, the sides of the phone are the same material as the back (slippery plastic) but i thought they were rubber. really only the lip is rubber and the lip is tiny at that. can you comment on if the griffin reveal has rubber sides and a decent sized lip?
Click to expand...
Click to collapse
Soft rubber sides and a more than adequate yet not overly massive lip. I am very picky with cases and am quite happy with the Griffin. It's very comfortable to hold and doesn't add much bulk at all. I would definitely recommend it if you are looking for that style of case.
How would you say it will hold up to drops? Does it have adequate protection? I know the cheap tpu cases handle drops quite well and seem to dissipate the energy from an impact. I'm guessing the rubber sides would do the same.
Sent from my XT1060 using xda app-developers app
asylvia said:
How would you say it will hold up to drops? Does it have adequate protection? I know the cheap tpu cases handle drops quite well and seem to dissipate the energy from an impact. I'm guessing the rubber sides would do the same.
Sent from my XT1060 using xda app-developers app
Click to expand...
Click to collapse
Hard to say considering I have no intention on testing it I do have a Diztronic TPU case (which I love) but I feel more comfortable having my phone in the Reveal vs. the TPU. Take that how you will.
http://www.incipio.com/cases/smartp...obile/brig-case-for-lg-g2-sprint-tmobile.html
So yea...was wondering if anyone has it yet. Just from looking at the picture im around if i got this case it might peel or damage the screen protector....but i love the case design and simplicity.
I'm thinking of going with this. Wonder if they'll make a red case to match my white G2
kookoomang said:
http://www.incipio.com/cases/smartp...obile/brig-case-for-lg-g2-sprint-tmobile.html
So yea...was wondering if anyone has it yet. Just from looking at the picture im around if i got this case it might peel or damage the screen protector....but i love the case design and simplicity.
Click to expand...
Click to collapse
I just bought this case the other day and I love it. It protects the phone well enough while still being thin and easy to slip in/out of my pocket. I don't use a screen protector so I can't attest to that aspect.
..
Well its a nice case to be considered for G2....but the same confusion is also arising in my mind regarding the screen protector....whether it would be compatible with it or not.....because as the pics are displayed it might peel off the screen protector....if anybody has used it please post the pics.....
newjake said:
Should be compatible, but no photos
HKC Q79 http://www.pandawill.com/hkc-q79-mt...ps-bluetooth-monster-phone-silver-p76860.html
Click to expand...
Click to collapse
Are you high, drunk or both?
so i got my screen protector and case
screen protector -
goods - comes with 3 screen protector, easy to do
bad - kinda streaky, also when i was peeling off the adhesive, i pulled it too fast and bent the screen protector, so basically you see the bent mark so thx god i had 2 more
but pretty good screen protector 7 out of 10
case - i like the simple look so im pretty happy with the case, a bit tough to take out once you put it on, but thank god theirs no battery to pull out
more pic and product
tiguy99 said:
I'm thinking of going with this. Wonder if they'll make a red case to match my white G2
Click to expand...
Click to collapse
Happy to say i found a red case that's similar to this style. unfortunately I have to remove my bodyguardz clear skin from the phone for it to fit.
I don't think I'm ready do that. Do any of you guys with this case have a skin on your phone? How's the fitment?
To the OP
I got this case today. It's the best feeling case I've used to date on any phone.
I don't use protectors but I think this will play nice with them. It doesn't come way over the bezel like other cases.
I love this case and its design. So sturdy and nice feeling.
LG G2
Its a ***** to take off.....but yeah it feels good and looks sleek
I've currently got a 2013 Moto X, and I'm pretty keen on upgrading to the new version, but I'm concerned that it's too big for my hands. I use the 2013 version very comfortably, and have found I can use a Galaxy S5 pretty well too since the backing is a bit grippy. Unfortunately the new Moto X doesn't have a return policy, so I'm loathe to pick up the phone without knowing it's something I can use.
My current developer edition (with the white polycarbonate backing) is very slick. I'd like something a bit grippier.
I'm considering the wood primarily, but does it have texture? Can you grip it OK? What about the leather? I'm very gentle on my phones, so I'm not that concerned about it wearing, but leather can be hit and miss as far as tactile feel.
Any other thoughts on this? Thanks
Neon01 said:
I'm considering the wood primarily, but does it have texture? Can you grip it OK? What about the leather? I'm very gentle on my phones, so I'm not that concerned about it wearing, but leather can be hit and miss as far as tactile feel.
Click to expand...
Click to collapse
The black soft touch back has good feel and decent grip. On a couple of other threads, owners have mentioned that the leather is a little slippery, but I've not handled it 1st hand.
The wood has a nice texture. I find that the wood is grippy enough, but the metal sides are a little slick and that seems to matter much more.
Just got my Moto X 2014 and the leather is so cheap and thin. Im so scared this is not going to last long. Why did Motorola use such a thin piece of leather? It also looks cheap.
Hey, I was wondering if the leather was thin or cheap?
Personally, I've had my black leather Moto X for a few weeks now, and I'm quite impressed at the quality of the leather. I guess my expectations were set when I had the wood back on the 2013 Moto X and took the back off to see the wood was probably around a millimeter thick. I guess I don't see them using more than 1-2mm for the back of the phone when it's 9.9 mm thick to begin with.
As for how well it will hold up over 2 years, that I can see a concern over... but I was willing to take the chance.
Did you want a big thick hunk of leather sticking out over the sides of the phone?
how do you know how thin it is? did you take the back off? This is horween leather, which is the same tannery that makes the leather for NFL official footballs. I really don't think this is cheap leather. Personally I am extremely pleased with the overall look of my leather back. If you want it to last 2 years, you just have to take really good care of it. Personally I am done letting people hold my phone because for some reason when I tell them it is leather they can't help but dig their nails into it. Also if you think the leather looks cheap, why did you order a leather back? there have been plenty of pictures floating around the web that clearly show how the leather looks.
Im just use to the old leather battery doors that Blackberry Bolds had. Its thin I can see it between the cam. I do love the phone. Just wish maybe I would of held off on the leather. Also the gold accents you cant see the color. I should of went with a brigter color.
What do you mean you can see it between the cam? Pretty sure there is a return policy if you are that unhappy with it
Sent from my XT1096 using Tapatalk
Have had mine for a couple weeks now and no issues here. It is holding up great and feels great. Personal preference I guess.
I have been loving my leather back. I seen reviewers say it scars easy and stuff like that. Mine seems to heal it's self of like creases when something is pressed against it. Though I am sure it would not fare well to scrapes from something rough like a stone or concrete...but then again I don't plan on hitting the back of my phone with those objects.