Database Develop

[STICKY] I9505G GE GALAXY S IV ( INDEX ) ROM's / LINKS / HOW TO THREAD

Welcome to the [STICKY] I9505G GE GALAXY S IV ( INDEX ) ROM's / LINKS / HOW TO THREAD formally the DISCUSSION GUIDE ​
This is the Official Index Roll up thread for the I9505G Google Edition Galaxy S IV. In this Index you will find helpful, links, guides, how to's and instructions for your I9505G.​
Please Post any links or helpful information in this thread or you can PM me so I can link it in the OP ( If your on the I9505/I9500 Please do NOT ASK about development for your device this is for the I9505G ONLY
(DISCLAIMER) As always I nor anyone is responsible if you cannot follow instructions in this or any other thread. We assume NO liability for bricks, loss of job, or the end of life as we know it.
GUIDES & LINKS
How to get CM 10.1 & CM 10.2 working on the I9505G
How Unlock the Bootloader for the I9505G
[OTA] OTA ZIP 4.3 for I9505G
How to Update your Baseband to get the 4.3 OTA
TOUCHWIZ Development Thread Q&A
Camera Save to SD Card for Google Edition ROM's
I9505G How to Set Device Mount Points in Android Kitchen GE S IV
4.3 SD Card Issue Fixed
How to upgrade a Stock+Root+Custom_Recovery I9505G from 4.3 to 4.4 and keep all Data​
ROOTING THREADS
How to Root 4.2, 4.3, 4.4 JB, Kit Kat I9505G
ROM's
[ROM][Linaro-4.8] XenonHD-4.4.2 Alpha 1 (5/1/14) *Truly Stable, Fast & Butter​
GOOGLE LITE EDITION 4.2.2 v.2 MFD
GOOGLE LITE EDITION 4.3 I9505GUEUBMH1 Ktoonsez Kernel
TOUCHLITE GE TOUCHWIZ ROM
[ROM] Google Edition 4.3 [Clean][Deodex][276MB]​
RECOVERY
How to install TWRP via Odin on the I9505G
TWRP for the I9505G
[BETA][RECOVERY] ClockworkMod Recovery 6.0.3.6​
[ODIN[TAR] Stock Recovery Images
MODEMS
ODIN TAR MODEMS
STOCK FIRMWARE LEAKS
Stock ODIN FIRMWARE Leaked 4.3 MFP ​
Stock ODIN FIRMWARE Leaked 4.3 MG8​
ODIN AND HEIMDAL PACKAGES​
Stock HEIMDAL 4.2.2 MFD back to Stock​
[ODIN][TAR] I9505GUEUAMFD 4.2.2 Full Rooted Restore
[ODIN][TAR] I9505GUEUBMH1 4.3 Full Rooted Restore
[ODIN][TAR] I9505UEUBMH5 4.3 Full Rooted Restore
[ODIN][TAR] I9505GUEUBMKG 4.4 Full Rooted Restore
[ODIN][TAR] I9505GUEUBML4 [4.4.2] Full Rooted Restore​
[ODIN][TAR] 4.4.3 I9505GUEUCNE3 Full Rooted Restore​
[ODIN][TAR] 4.4.4 I9505GUEUCNF3 Full Rooted Restore​

Reserved
Big Thanks to Illogic6 for being the Very 1st Person to get Touchwiz Booted to the I9505G post #31 and SamuriHL for solving the Baseband Update Issue and Chainfire
Modem Update : Due to the secure boot loader we cannot flash modems via cwm or any other custom recovery. You MUST update your firmware via Odin
Touchwiz Works with some ROM's like BareBones from the I9505 forum being successfully booted on the I9505G. TW Development is ongoing for the I9505G but with the small partition size some issues exist, and are being researched and worked out.
http://forum.xda-developers.com/showthread.php?t=2405273
11/28/2013 : KitKat initial release this week New Updated Odin Packages and ROM's please check A&D section
DONT FORGET TO THANK THE MEMBERS AND DEVS WORKING HARD ON THE I9505G DEVELOPMENT
07/21/2014: I just wanted to make a note that I still get emails and requests for help and although I am no longer doing any sort of work on the I9505G I will try to help you out if you PM me. PLEASE BIG THANK YOU TO @SamuraiHL he is really the one maintaining everything for I9505G Owners and if you have not thanked him please do. Actually without volunteering him he is your best POC for anything current. I will maintain the thread for organization now and then. ALOHA

MJHawaii said:
Reserved :good:
Click to expand...
Click to collapse
Nice to see someone do this. Hope this will build up and morph into ROM's, etc.
How is your ROM coming along?

wilbarger said:
Nice to see someone do this. Hope this will build up and morph into ROM's, etc.
How is your ROM coming along?
Click to expand...
Click to collapse
Right now just standard kitchen tweaks on 4.3 but I am trying to get the whole device mount points set up in Cygwin and I'm having trouble because when I extract everything and open up the recovery.fstab file with notepad ++ it does not show anything but 0p1 nothing for system, boot & data so I'm lost and need help
Sent from my GT-I9505G using Tapatalk 2

MJHawaii said:
Right now just standard kitchen tweaks on 4.3 but I am trying to get the whole device mount points set up in Cygwin and I'm having trouble because when I extract everything and open up the recovery.fstab file with notepad ++ it does not show anything but 0p1 nothing for system, boot & data so I'm lost and need help
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
One person you might contact is mohan_kr. He has come over to the S4 from the Skyrocket recently. Excellent at working on the ROM's. Sorry I can not be of assistance, but I am not very advanced on Android.

wilbarger said:
Nice to see someone do this. Hope this will build up and morph into ROM's, etc.
How is your ROM coming along?
Click to expand...
Click to collapse
wilbarger said:
One person you might contact is mohan_kr. He has come over to the S4 from the Skyrocket recently. Excellent at working on the ROM's. Sorry I can not be of assistance, but I am not very advanced on Android.
Click to expand...
Click to collapse
That's what this thread is for though for everyone to get together share information and collaborate.

Chahk's post about mount points and getting other CM/AOSP ROMs working on I9505G deserves its own link:
http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30

MJHawaii said:
Right now just standard kitchen tweaks on 4.3 but I am trying to get the whole device mount points set up in Cygwin and I'm having trouble because when I extract everything and open up the recovery.fstab file with notepad ++ it does not show anything but 0p1 nothing for system, boot & data so I'm lost and need help
I saw Chahk post and it is helpful this is where I'm at right now read above. I did pm Chahk and a few others for help. I will work on it a little later this weekend
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Sent from my GT-I9505G using Tapatalk 2

irishrally said:
Chahk's post about mount points and getting other CM/AOSP ROMs working on I9505G deserves its own link:
http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30
Click to expand...
Click to collapse
x2
I've found that very useful. Been able to get every AOSP/CM based ROM to boot by editing the updater-script to match the correct partition.
Has anybody noticed that photos taken with the front facing camera on CM sometimes have green distortion? That was the only bug I've found. Unfortunately, that flared up my phone OCD enough to go back to the 4.3 leak.
Thanks for putting this thread together, OP!

illogic6 said:
x2
I've found that very useful. Been able to get every AOSP/CM based ROM to boot by editing the updater-script to match the correct partition.
Has anybody noticed that photos taken with the front facing camera on CM sometimes have green distortion? That was the only bug I've found. Unfortunately, that flared up my phone OCD enough to go back to the 4.3 leak.
Thanks for putting this thread together, OP!
Click to expand...
Click to collapse
Your Welcome. So I read on the other thread and I know myself and others are looking at how we can port other ROMs specifically touchwiz over to the G the partition as you know is an issue but I think with collaboration can be solved soon.
Keep it coming let's solve problems!
Sent from my GT-I9505G using Tapatalk 2

MJHawaii said:
Your Welcome. So I read on the other thread and I know myself and others are looking at how we can port other ROMs specifically touchwiz over to the G the partition as you know is an issue but I think with collaboration can be solved soon.
Keep it coming let's solve problems!
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
I took a TW ROM and edited the script for our devices. It boots, but the display never kicks on. You get the boot animation sound and it even mounts the storage on my computer.

illogic6 said:
I took a TW ROM and edited the script for our devices. It boots, but the display never kicks on. You get the boot animation sound and it even mounts the storage on my computer.
Click to expand...
Click to collapse
Wow that's great maybe you can help me with my script it sounds like your further along than some. I wonder what would cause the display bug doesn't sound like a boot issue
Sent from my GT-I9505G using Tapatalk 2

MJHawaii said:
Wow that's great maybe you can help me with my script it sounds like your further along than some. I wonder what would cause the display bug doesn't sound like a boot issue
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Here's the ROM I was messing with. I used the "old firmware" because it was the newest one when I first looked. http://forum.xda-developers.com/showthread.php?t=2349369
I've attached my modded updater script. (You will have to remove the .txt extension. Wouldn't let me upload without it.) All I had to do was edit which /dev/block the script mounts before it copies stuff over. If I recall correctly, I only had to change the dev it flashes the boot.img to. See this post: http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30
include 'standard_disclaimer.php';

illogic6 said:
Has anybody noticed that photos taken with the front facing camera on CM sometimes have green distortion?
Click to expand...
Click to collapse
I think this might be fixed in the newest CM nightly. I've took about 20 selfies with the front facing camera and haven't had distortion at all. Before I'd get it every 3 or 4 photos.
Edit: Disregard the above. The problem is back, but I'm thinking it might be the 4.3 camera zip I've been using. Hmmmmmmm......

I think I jumped the gun a bit on rooting my I9505G right when I got it. I've never successfully rooted it, but I managed to get on the 4.3 ROM with a few quirks here and there. My ultimate goal is to get Paranoid Android with halo running, but I'll have to dedicate a day to the whole process. I'll be keeping track of this thread.

illogic6 said:
Here's the ROM I was messing with. I used the "old firmware" because it was the newest one when I first looked. http://forum.xda-developers.com/showthread.php?t=2349369
I've attached my modded updater script. (You will have to remove the .txt extension. Wouldn't let me upload without it.) All I had to do was edit which /dev/block the script mounts before it copies stuff over. If I recall correctly, I only had to change the dev it flashes the boot.img to. See this post: http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30
include 'standard_disclaimer.php';
Click to expand...
Click to collapse
Thanks a lot I will take a look tomorrow and see what I can do
Sent from my GT-I9505G using Tapatalk 2

illogic6 said:
Here's the ROM I was messing with. I used the "old firmware" because it was the newest one when I first looked. http://forum.xda-developers.com/showthread.php?t=2349369
I've attached my modded updater script. (You will have to remove the .txt extension. Wouldn't let me upload without it.) All I had to do was edit which /dev/block the script mounts before it copies stuff over. If I recall correctly, I only had to change the dev it flashes the boot.img to. See this post: http://forum.xda-developers.com/showpost.php?p=43843048&postcount=30
include 'standard_disclaimer.php';
Click to expand...
Click to collapse
Great work Illogic I wonder why TW will not display I tried as well but I did not get as far as you mine fails during the installation.
Also did you see my post on getting Cygwin to set device mount points that in itself will speed things up
Sent from my GT-I9505G using Tapatalk 2

MJHawaii said:
Great work Illogic I wonder why TW will not display I tried as well but I did not get as far as you mine fails during the installation.
Also did you see my post on getting Cygwin to set device mount points that in itself will speed things up
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
I haven't used Cygwin before. I'll take a look at it today.
Also going to mess around with TW a little more. Maybe we just need some libs from the stock 9505g rom or something.
Update: I'm afraid I may have mislead you earlier. It appears that you need more than just the updated update-script in order to get touchwiz to boot. You also need a kernel from one of the 4.3 leaks. Here's the one I've been using. (Attached) Not only does it boot, but the soft keys work and you can hear the sound effects of the lock screen. I'm very close.

illogic6 said:
I haven't used Cygwin before. I'll take a look at it today.
Also going to mess around with TW a little more. Maybe we just need some libs from the stock 9505g rom or something.
Update: I'm afraid I may have mislead you earlier. It appears that you need more than just the updated update-script in order to get touchwiz to boot. You also need a kernel from one of the 4.3 leaks. Here's the one I've been using. (Attached) Not only does it boot, but the soft keys work and you can hear the sound effects of the lock screen. I'm very close.
Click to expand...
Click to collapse
Wow Illogic your close bro thanks for your hard work the libs does sound like it would cause the display problem I'm gonna play around with this too. All I did was unpack stock 4.3 and zip and deo the files with root. The problem I am having is that I am still learning U-scripts and so I cannot get anything to flash. I get failed on 0p21 even though its changed. Maybe I can pm you what I did later and get your feedback cuz your miles ahead of me
Sent from my GT-I9505G using Tapatalk 2

I've merged libs from the leaked 4.3 build into the TW ROM without overwriting anything. Didn't seem to change anything. At this point, I'm playing with magic I don't understand so not sure how much farther I'm going to get.
Would really like figure out which files in the system are responsible for the display. Perhaps we need to overwrite those files. Google is failing me so far.
---------- Post added at 04:45 PM ---------- Previous post was at 04:29 PM ----------
Tada! :victory:
The error message goes away. Right now, the web browser force closes... that might be because of the ROM I was modifying. What I did was use the 4.2.2 kernel that shipped with the google play phones. That booted AND activated the display.
http://i.imgur.com/HZaraPK.jpg

[Q] [UPDATED] Probelm Bootloop error with dsixda's kitchen cooked ROM

Hello guys:laugh:
I searched every forum thoroughly but didn't found a proper and working solution for Xperia devices
I am trying to make a custom ROM from stock using dsixda kitchen
I used stock 12.1.A.201 as the base ROM
I believe that it's either the updater script error or kernel probelm as I am using stock kernel and my zip is like this
Data
META-INF
system
boot.img
check_data_app
Click to expand...
Click to collapse
This happens when rom is created
De-odexed it rooted it and added X-Reality engine and created the rom
First on installing I got error of status 0 so I changed my update binary file from same de-odexed version from this link http://forum.xda-developers.com/showthread.php?t=2704312 by @dipesh1502 (thanks to him for that awesome rom)
Next I am getting error status 7
ROM Starts flashing then it comes to this part
formatting system bla bla
expected 5 args got 3
Click to expand...
Click to collapse
something like that and then it stops on error status 7
here is the updater-script please have a look. I really want to create this ROM. Please help
Updater-Script Download
here is my build prop build.prop download
Help guys please I'll be highly grateful
My device is C5302 rooted and unlocked bootloader with 12.1.A.205 stock kernel
EDIT : Got past the error status 7 now ROM gets installed
But unfortunately now it ends in a bootloop :/ Got stuck on Sony splash logo and then reboots constantly :/
Had a nandroid backup ready x)
Had to flash the ftf file over and over again. :/
Phone is allright just want to catch this error of bootloop.
I changed kernel with the dipesh1502's ROM but still no luck. Modified Updater script but still no luck. help me I am soo confused and screwed!! :'( :'(
My new Updater-Script

There's a HUGE difference in creating boot animations and creating a ROM.
Don't expect to teach yourself how to make a ROM in just a few days.
It takes, weeks, months, years...
If you're mainly planning to make some exterior changes, which I think you're currently doing, I would focus on making complete themes and not ROMs.
People are not waiting for a ROM which is already available but that looks somewhat different and maybe has some extra or removed apps.
Regarding your problem, I will not be able to help you since I don't have that kind of knowledge.
Anyway, good luck!

Gamm86 said:
There's a HUGE difference in creating boot animations and creating a ROM.
Don't expect to teach yourself how to make a ROM in just a few days.
It takes, weeks, months, years...
If you're mainly planning to make some exterior changes, which I think you're currently doing, I would focus on making complete themes and not ROMs.
People are not waiting for a ROM which is already available but that looks somewhat different and maybe has some extra or removed apps.
Regarding your problem, I will not be able to help you since I don't have that kind of knowledge.
Anyway, good luck!
Click to expand...
Click to collapse
Thanks for the reply.
Yeah I know that it's not easy to create ROM and also it takes a lot of time. I am ready to give it a shot
I am just making some small changes just for my sake I'll be using this ROM personally for my own use I know that there are a thousand times better ROM's than mine
Anyway glad you considered my probelm.

Bootloop can be cause by:
- Wrong permissions
- Corrupt installation
It is nice if you collect either the last_ksmg or logcat when bootlooping. (if possible)
~~Regard
---------- Post added at 08:08 PM ---------- Previous post was at 08:04 PM ----------
But first:
Share me the .zip you have created perhaps I can take a small look
~~ Regards

mrjraider said:
Bootloop can be cause by:
- Wrong permissions
- Corrupt installation
It is nice if you collect either the last_ksmg or logcat when bootlooping. (if possible)
~~Regard
Click to expand...
Click to collapse
Thanks for the reply
Can you please have a look at my new updater-script and tell me what is wrong?
I will surely try to get logcat but before that if you can just analyze this updater-script and pinpoint the mistakes it'll make my work a lot easier.
Thanks in advance :good:

Sent me the entire .zip file instead (but start with updater-script)
~~Regards

mrjraider said:
Sent me the entire .zip file instead (but start with updater-script)
~~Regards
Click to expand...
Click to collapse
Sure thing I'll
I am compressing it to maxium extent using KGB archiver and it'll become around 10~20 mb only
It's still compressing so it'll take some time before it reaches it's max compression.
I'll surely send you asap

[Q&A] [JANICE][OFFICIAL][DEVELOPMENT] - CrystalPA 6.00 - Android 4.4.4 - CRX Team

Q&A for [JANICE][OFFICIAL][DEVELOPMENT] - CrystalPA 6.00 - Android 4.4.4 - CRX Team
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [JANICE][OFFICIAL][DEVELOPMENT] - CrystalPA 6.00 - Android 4.4.4 - CRX Team. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Good to see someone doesn't forgot our mob :highfive:

When update ??.. project lost ???

Where is t
Where is the download link for v8.00 ? I found only 7.00 in the website :/

Where can i download the gapps?

MuhdMuzakkir said:
Where can i download the gapps?
Click to expand...
Click to collapse
Anywhere. Just search XDA 4.4.4. gapps.

Problems
Can't download the file from crxteam page. do you guys have a new link?

Can anyone tell me how to replace keyboard apk in system folder ? Do I need to resign the apk? Or what am I missing? Seems that Whatever I try, it doesn-t want to work at all ( with custom keyboards )

pictorul20 said:
Can anyone tell me how to replace keyboard apk in system folder ? Do I need to resign the apk? Or what am I missing? Seems that Whatever I try, it doesn-t want to work at all ( with custom keyboards )
Click to expand...
Click to collapse
You can just put it in data, no need to be in system partition. And probably it is because it is not signed.
P.S. Try to put same permission like on other apks there. 644

shut_down said:
You can just put it in data, no need to be in system partition. And probably it is because it is not signed.
P.S. Try to put same permission like on other apks there. 644
Click to expand...
Click to collapse
to make things clearly, maybe i didin-t say all the right story ............. I am trying to make a full blacked out rom ( Fully with only hdpi icons ) so ........ that all been said , I need every apk to be modified in order to achieve this goal ( I must to confirm, I gained some more free ram and more space for installing apk-s ) so .......... thing is ........... i get errors with camera2.apk and with latinIME.apk everytime I try to repack the apk and replace with the quote stock keyboard . no matter if i try to sign/unsign it ......... it doesn„t like the repack process or maybe I-m missing something? Maybe it needs to be recompiled? I did this method for every other apk that can be found in system folder, without problems. Only camera 2 and LatinIME gave me those nasty errors.....maybe they are repacked in other way ?
P.S : I-m on dark cm rom , so yeahh........ that-s my experiment rom .
L.E : I found out that I don-t have to repack the apk. I only need to zip it normally without any modification like decompiling or whatever else

pictorul20 said:
to make things clearly, maybe i didin-t say all the right story ............. I am trying to make a full blacked out rom ( Fully with only hdpi icons ) so ........ that all been said , I need every apk to be modified in order to achieve this goal ( I must to confirm, I gained some more free ram and more space for installing apk-s ) so .......... thing is ........... i get errors with camera2.apk and with latinIME.apk everytime I try to repack the apk and replace with the quote stock keyboard . no matter if i try to sign/unsign it ......... it doesn„t like the repack process or maybe I-m missing something? Maybe it needs to be recompiled? I did this method for every other apk that can be found in system folder, without problems. Only camera 2 and LatinIME gave me those nasty errors.....maybe they are repacked in other way ?
P.S : I-m on dark cm rom , so yeahh........ that-s my experiment rom .
L.E : I found out that I don-t have to repack the apk. I only need to zip it normally without any modification like decompiling or whatever else
Click to expand...
Click to collapse
Read part titled Signing: http://forum.xda-developers.com/showthread.php?t=2295002

Hi, i used the 8.00ver, but camera apk doesn't work. How can i solve this probleme?

Mocsokba said:
Hi, i used the 8.00ver, but camera apk doesn't work. How can i solve this probleme?
Click to expand...
Click to collapse
Just curious: where did you get CPA 8.00.
AFAIK ver 7.00 is the latest one for the SGSA.

rog_star said:
Just curious: where did you get CPA 8.00.
AFAIK ver 7.00 is the latest one for the SGSA.
Click to expand...
Click to collapse
Sorry, your right. I was on 7.00ver

Hello devs, and thank you for sharing your ROM with us.
I got a question. When I got missed call notification for the very first time after installation I have swiped it to the left. Then, i was asked if I want to enable opening apps in floating window after swiping notification to the left. I pressed "Yes", but now I regret that decision. Now, the question - how to disable opening app in window after swiping notification? I cannot find any kind of settings.

davider said:
Hello devs, and thank you for sharing your ROM with us.
I got a question. When I got missed call notification for the very first time after installation I have swiped it to the left. Then, i was asked if I want to enable opening apps in floating window after swiping notification to the left. I pressed "Yes", but now I regret that decision. Now, the question - how to disable opening app in window after swiping notification? I cannot find any kind of settings.
Click to expand...
Click to collapse
@davider Go to setting - Backup & reset - reset prefernce...i think there should be reset option to disable floating window

new version
a new version 8.50 is available on the crx site, dont know about the stability any one tried it?

[Q&A] [ROM] [STOCK] [XT1069] [ROOT] Stock ROM - XT1069 - KXB21.85-24

Q&A for [ROM] [STOCK] [XT1069] [ROOT] Stock ROM - XT1069 - KXB21.85-24
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [STOCK] [XT1069] [ROOT] Stock ROM - XT1069 - KXB21.85-24. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

You created two scripts?
adrianom said:
I made some scripts to clean (remove stock apps) and optimize the ROM, instead of modifying the main ROM, I created these scripts that must be run in recovery.
For download go to post 2.
...
Click to expand...
Click to collapse
I packed your recoverys and made a zip flashable recovery, but never said I made a recovery. When a new version appears I pointed to your work.
http://www.htcmania.com/showthread.php?t=907314
You have used my script. I'm not a developer as you are, but I don´t think you like that people use your work and say nothing about your effords.
http://www.htcmania.com/showthread.php?t=909354
Regards.

elperroderoke said:
I packed your recoverys and made a zip flashable recovery, but never said I made a recovery. When a new version appears I pointed to your work.
http://www.htcmania.com/showthread.php?t=907314
You have used my script. I'm not a developer as you are, but I don´t think you like that people use your work and say nothing about your effords.
http://www.htcmania.com/showthread.php?t=909354
Regards.
Click to expand...
Click to collapse
Yes, indeed I use some lines of your post, but to be clear, the script that is in the zip is not what is in your post, it has a lote more, and yours don't work on this device, yes a grab some delete lines to simplified the list of apps, but that was it, and I have not mentioned, simply by forgetting it.
I put the reference now:
http://forum.xda-developers.com/showpost.php?p=56221065&postcount=2

scripts
I saw the lines you included and I hope you don't mine I will use some of them to improve my script for X1068.
If you be so kind to solve a question about deleting some files I would thank you.
Is there any way to delete the updates apk in /data/app?
As you know some of them are in /system and in /data once they are updated, but the name changes if is update again.
For instance:
Books.apk is in /system but, com.google.android.apps.books-1.apk is in /data and if is updated again it will be com.google.android.apps.books-2.apk
I tried using
delete("/data/app/com.google.android.apps.books*.apk");
or
delete("/data/app/com.google.android.apps.books-*.apk");
instead of
delete("/data/app/com.google.android.apps.books-1.apk");
delete("/data/app/com.google.android.apps.books-2.apk");
bud didn't work. Is there any way to delete the files that that have similar name.
Thank you for all your work.
Regards.

Any custom rom or rom adapted for xt1069?

Error
Hello man, I'm brazillian, sorry for my english.
I tried to flash a rom from this website: sbf.droid-developers.org/phone.php?device=36 , the last rom, because my Moto G 2 is Duos TV. When I flashed the rom, my camera stopped, just the frontal camera function, my flashlight too stopped... I really like to know, if you can help me with it... How you know, the cam of Moto G 2 has a button to change between Frontal and main camera, but this button doesn't appears, and the options in the configuration is blocked(some of them).
Please help me, I paid R$799,00 (money of Brazil), thanks a lot for everything!

xdaVTU said:
Hello man, I'm brazillian, sorry for my english.
I tried to flash a rom from this website: sbf.droid-developers.org/phone.php?device=36 , the last rom, because my Moto G 2 is Duos TV. When I flashed the rom, my camera stopped, just the frontal camera function, my flashlight too stopped... I really like to know, if you can help me with it... How you know, the cam of Moto G 2 has a button to change between Frontal and main camera, but this button doesn't appears, and the options in the configuration is blocked(some of them).
Please help me, I paid R$799,00 (money of Brazil), thanks a lot for everything!
Click to expand...
Click to collapse
You are using the Motorola app or the Google camera app? The button to change are in different places.
About the firmware, you have to flash the correct one? Has to be the with dstv in the name. If you flash the wrong one try flash the correct.

help
adrianom said:
You are using the Motorola app or the Google camera app? The button to change are in different places.
About the firmware, you have to flash the correct one? Has to be the with dstv in the name. If you flash the wrong one try flash the correct.
Click to expand...
Click to collapse
Adrianom, thanks for answer my question, but yes, I made the correct download, in the name was wrote DSTV, and about the app.. I don't know what the app that I'm using, is the factory app of the device, probability of Motorola. And all the apps that has the function of camera, neither of them work with me... Thanks for everything, and.... What do you think about my english? Is good or not?

Restarts before finalizing the installation
Friend, did the procedure to install this ROM , already have the unlocked Bootloader and Flash Recovery CWM , however when are installing the phone restarts and crashes in toot screen. Has suggested to solve this?

Using scripts can usually upgrade?
If I install the Rom Stock and use the scripts before the OTA update, I can upgrade later without the applications of Motorola?

Perfect installation
Did all the installation process and everything was perfect, just a detail that installed only by CWM recovey at TWRP was not.

Root is stable? No bootloops? I turn back to kk from 5.0 because link2sd not working in 5.0 rooted and unstable root.

Not W
Its not working on me, i'm getting a black screen at boot time.

Update bootloader
If I flash this rom my bootloader will go to version 46.87?

[DEV ONLY] CyanogenMod 12.0 Bringup for Condor

A couple of people were starting to work on CyanogenMod 12. Hopefully they are still interested in working on these projects. I am posting this as a place to share branches and collaborate if there is still interest in helping.My trees build perfectly.And the recovery baked from the cm-12 tree has display,touch working.But while installing zip I get a weird status-7 'failed to execute update binary.but since the Display,touch is working,it will be a pretty easy for working LP build.Please noobs stay away from asking weird questions.
At this point,I need support from any dev willing to work for this project.My trees are here.
https://github.com/ashwinr64/android_device_motorola_condor/
https://github.com/ashwinr64/android_kernel_motorola_msm8610
https://github.com/ashwinr64/android_vendor_motorola_condor
Btw,no hard feelings for anyone out there including @#buzz
I hope we can port LP very easily soon.

First thanks o.o

Why dont u use philz touch recovery or CWm for flashing
on cm and twrp recovery I also sometimes get those errors

Brawn_Sg said:
Why dont u use philz touch recovery or CWm for flashing
on cm and twrp recovery I also sometimes get those errors
Click to expand...
Click to collapse
Philz doesn't support --block flashing or the new method of flashing LP.our twrp has not properly implemented fstab for installation and I'm not able to make twrp with new fstab in cm-12.0 tree as it is throwing a lot of error messages and I currently don't have any kitkat based ROM tree due to my computer corruption few days ago.
I will be trying a clean build 2day.

ashwin007 said:
A couple of people were starting to work on CyanogenMod 12. Hopefully they are still interested in working on these projects. I am posting this as a place to share branches and collaborate if there is still interest in helping.My trees build perfectly.And the recovery baked from the cm-12 tree has display,touch working.But while installing zip I get a weird status-7 'failed to execute update binary.but since the Display,touch is working,it will be a pretty easy for working LP build.Please noobs stay away from asking weird questions.
At this point,I need support from any dev willing to work for this project.My trees are here.
https://github.com/ashwinr64/android_device_motorola_condor/
https://github.com/ashwinr64/android_kernel_motorola_msm8610
https://github.com/ashwinr64/android_vendor_motorola_condor
Btw,no hard feelings for anyone out there including @#buzz
I hope we can port LP very easily soon.
Click to expand...
Click to collapse
Which version of cwm recovery is in the build?

gud work
@ashwin007 is it compiling ? (kernel source )
Edit :
This should help https://github.com/KonstaT/android_kernel_zte_msm8610/compare/cm-11.0...cm-12.0
check if some commits are missing

goutamniwas said:
@ashwin007 is it compiling ? (kernel source )
Edit :
This should help https://github.com/KonstaT/android_kernel_zte_msm8610/compare/cm-11.0...cm-12.0
check if some commits are missing
Click to expand...
Click to collapse
Ya the kernel compiles perfectly.I have cherry-picked all those commits.and display and touch working.installation is the roadblock
Could you do me a favour?
Can you build twrp from kk tree using my fstab in
My device tree.and don't forget to add 'e2fsck' package to device.mk.thanks in advance!!!!!!
BTW I love your t2u.amazing!!!!
P.s:even my native place is Coimbatore.
EDIT:Well @ace312 its no more cwm in cm tree.its cyanogen recovery made by cm

ashwin007 said:
Ya the kernel compiles perfectly.I have cherry-picked all those commits.and display and touch working.installation is the roadblock
Could you do me a favour?
Can you build twrp from kk tree using my fstab in
My device tree.and don't forget to add 'e2fsck' package to device.mk.thanks in advance!!!!!!
BTW I love your t2u.amazing!!!!
P.s:even my native place is Coimbatore.
Click to expand...
Click to collapse
Coimbatorean gr8 , sorry but i dont have enough bandwidth for a cm sync :crying:
bw tat means u cant install it anyway ?
also thanks much for the complements

goutamniwas said:
Coimbatorean gr8 , sorry but i dont have enough bandwidth for a cm sync :crying:
bw tat means u cant install it anyway ?
also thanks much for the complements
Click to expand...
Click to collapse
nevermind.i think i made a dirty build by replacing cmr with twrp without mka clean.so rebuilding now.hopefully it'll work.

Hey,
Why don't you flash system.img and boot.img with fastboot?

ace312 said:
Which version of cwm recovery is in the build?
Click to expand...
Click to collapse
CWM/Philz is dead. CM has moved to CM Simple Recovery with CM12 and has ditched CWM. If you follow Gerrit, you'll know.
CM Simple Recovery is quite nascent ATM. TWRP is the recovery to beat, especially on Lollipop sources.
Sorry @ashwin007 for posting this on this thread while still being a n00b. I posted this to prevent further paranoid posts about the death of CWM. Apologies.

GeekyDroid said:
Hey,
Why don't you flash system.img and boot.img with fastboot?
Click to expand...
Click to collapse
sw33ty4ppu said:
CWM/Philz is dead. CM has moved to CM Simple Recovery with CM12 and has ditched CWM. If you follow Gerrit, you'll know.
CM Simple Recovery is quite nascent ATM. TWRP is the recovery to beat, especially on Lollipop sources.
Sorry @ashwin007 for posting this on this thread while still being a n00b. I posted this to prevent further paranoid posts about the death of CWM. Apologies.
Click to expand...
Click to collapse
Geekydroid.system.IMG is huge (700mb).but Motorola has that sparsechunk tech which separates system image into small part(you must be obviously knowing).so installing system.IMG makes it corrupt the /system partition.twrp 2.8.4.0 is working now.but i need to modify fstab for twrp which I forgot to do
Sw33ty4ppu not a problem.I think you have helped many of them.

sw33ty4ppu said:
CWM/Philz is dead. CM has moved to CM Simple Recovery with CM12 and has ditched CWM. If you follow Gerrit, you'll know.
CM Simple Recovery is quite nascent ATM. TWRP is the recovery to beat, especially on Lollipop sources.
Sorry @ashwin007 for posting this on this thread while still being a n00b. I posted this to prevent further paranoid posts about the death of CWM. Apologies.
Click to expand...
Click to collapse
okay. it's been months I left ROM development. Sorry about that.

ashwin007 said:
Geekydroid.system.IMG is huge (700mb).but Motorola has that sparsechunk tech which separates system image into small part(you must be obviously knowing).so installing system.IMG makes it corrupt the /system partition.twrp 2.8.4.0 is working now.but i need to modify fstab for twrp which I forgot to do
Sw33ty4ppu not a problem.I think you have helped many of them.
Click to expand...
Click to collapse
Well, sorry I thought it is less than 215MB. I didn't think of it.

My last device was a motorola defy and developer @Quarx has a booting 5.0 lolipop build. perhaps he could enlighten us on how to make a booting build for out device.
Moto defy came with android 2.1 and kernel 2.6 so he should be able to help.

Now even moto e has received the "motorola update services app" update!! So maybe we are pretty close enough to get android L now!!! I think rather than rushing up things for condor cm12 and getting a buggy build after soo much hardwork wouldn't feel good!! Maybe we can wait a while for the android L to hit moto e ans then finally build cm12 which would be more stable too!!
•°•°•°•°•°•°•°•°•°•°•°•°•°•°•°•°•°•°•°•°•

see the attachment...
Lolipop is more closer...

This is a development thread.Refrain from posting those monotonous posts.I would like to keep this thread clean.

http://www.stjsgadgets-portal.com/2015/02/moto-e-users-start-getting-lollipop.html?m=1

I've received several reports for this thread in the past 2 days, so now it's time to issue a global warning here:
Let's keep this thread on topic, DEVELOPMENT, which is clearly stated in the title AND in the OP.
If you have a question, SEARCH FIRST, per the Forum Rules
1. Search before posting.
Use one of our search functions before posting or creating a new thread. Whether you have a question or just something new to share, it's very likely that someone has already asked that question or shared that news.
Click to expand...
Click to collapse