I am using CyanogenMod v3.6.8.1 and I decided I wanted a swap partition.
I partitioned my 2GB SD with a 32MB swap partition and formatted using gparted.
From the shell (using adb) I remounted /dev/block/mtdblock3 with rw and edited /system/etc/fstab and added a line for the swap. Here is what the entire file looks like now:
Code:
/dev/block/mtdblock3 /system yaffs2 rw
/dev/block/mtdblock4 /cache yaffs2 rw
/dev/block/mtdblock5 /data yaffs2 rw
/dev/block/mmcblk0p1 /sdcard vfat rw
/dev/block/mmcblk0p2 /system/sd auto rw
/dev/block/mmcblk0p3 none swap sw
/system/modules/modules.sqf /system/modules squashfs ro,loop
/system/xbin/xbin.sqf /system/xbin squashfs ro,loop
I can turn on the swap with 'swapon -a' which works and shows up in /proc/swaps and with the 'free' command, but upon boot, swap isn't activating.
I'm not really familiar with the android init scripts, so I'm not sure how I can enable the swap automatically upon boot. Any advice would be appreciated.
Okay I fixed it.
I downloaded one of Drizzy's roms that I know use swap, extracted, and searched for 'swap' in all the files. I found it in /system/bin/a2sd at the end. Here is what's there:
Code:
if [ -n /dev/block/mmcblk0p3 ];
then
mkswap /dev/block/mmcblk0p3;
fi;
if [ -e /dev/block/mmcblk0p3 ];
then
echo 30 > /proc/sys/vm/swappiness;
swapon /dev/block/mmcblk0p3;
fi;
The first if doesn't make sense to me as it's a string test which will always be true, so I got rid of it and just kept the test for the file existing, but I changed it to -b to be a little more specific (to see if it's a block device), and I commented out the swappiness change to leave it at default.
Im using same rom and i woild love to do this but is there any other way as im totally unfamiliar with adb
turboyo said:
Im using same rom and i woild love to do this but is there any other way as im totally unfamiliar with adb
Click to expand...
Click to collapse
I just used adb because I can use the copy/paste function of my gnome terminal and it's easier than using the shell on the phone itself.
Here is what is needed:
Get into a root shell, either on the phone or using adb.
Code:
mount -t yaffs2 -o rw,remount /dev/block/mtdblock3 /system
vi /system/bin/a2sd
press capital G which will take you to the bottom of the file
press lower case o which will open a line below your cursor for editing.
type in the following:
Code:
if [ -b /dev/block/mmcblk0p3 ];
then
echo 30 > /proc/sys/vm/swappiness;
swapon /dev/block/mmcblk0p3;
fi;
press escape to exit insert mode (I read that in the terminal emulator you have to hold the trackball and press 1 for esc)
type :wq and press enter.
exit terminal and reboot. To see if it's working, get back into a terminal and use the command 'free'
you can also do 'swapon -a' instead of specifying the swap partition itself. Note that the above example uses the third partition of the SD card as the swap.
This also assumes you have already created the swap partition and formatted it as swap.
You can omit the swappiness line to leave it at the linux default of 60.
few days ago I decided to move to "Cyanogen Mod" (kabaldan),
and i did the move from EXT2 to EXT4 and here what I did
Code:
ext2 to ext3 convert:
boot to AOR and pick a console
umount /dev/block/mmcblk0p2
/system/bin/e2fsck -f /dev/block/mmcblk0p2
/system/bin/tune2fs -j /dev/block/mmcblk0p2
ext3 to ext4:
first two step is same as before
/system/bin/tune2fs -O extents,uninit_bg,dir_index /dev/block/mmcblk0p2
/system/bin/e2fsck -fpDC0 /dev/block/mmcblk0p2
and now I tried the Ginger MIUI but then my EXT4 partition dont work
and it writes me this
Code:
The superblock could not read or does not describe a correct ext2 filesystem.
if the device is vaild and is really contains an ext2 filesystem (and not swap or ufs or something else),
then the superblock is corrupt.
and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
I really need help on this bcuz my 8gb sd card now have 6gb how do I fix this?
it will be great if you can post here the lines to write in the terminal and explain it to me a bit
BTW im back on cyanogen for good bcuz of that good built in hebrew
Code:
Note: Before you apply the update if you have upgraded to ext4 it is advised to upgrade your OR. Please refer this post
http://forum.xda-developers.com/show...postcount=2755
This is mentioned in the MIUI rom thread. Have you upgraded OR yet?
Hey there,
it's known that ext4 with disabled journaling is little faster than default, but it is also less reliable.
This can result in screwed up homescreens and force-closes after reboot/shutdown/battery pull.
I have successfully re-enabled journaling for system and cache partition, but it seems not to work correctly for data partition, at least for me. Can you help?
Code:
echo ..............system Partition...............
/sbin/busybox umount -l /system
/sdcard/tmp/tune2fs -O +has_journal -c 5 -i 5d -m 0 -o journal_data_ordered /dev/block/mmcblk0p1
fsck.ext4 -Dfy /dev/block/mmcblk0p1
/sbin/busybox mount -t ext4 -o nosuid,nodev,noatime,nodiratime,barrier=0,nobh,data=ordered,noauto_da_alloc /dev/block/mmcblk0p1 /system
echo ...............done...............
echo ...............cache Partition...............
/sbin/busybox umount -l /cache
/sdcard/tmp/tune2fs -O +has_journal -c 100 -i 100d -m 0 -o journal_data_writeback /dev/block/mmcblk0p2
fsck.ext4 -Dfy /dev/block/mmcblk0p2
/sbin/busybox mount -t ext4 -o nosuid,nodev,noatime,nodiratime,barrier=0,nobh,data=ordered,noauto_da_alloc /dev/block/mmcblk0p2 /cache
echo ...............done...............
echo ...............data Partition...............
/sbin/busybox umount -l /data
/sdcard/tmp/tune2fs -O +has_journal -c 5 -i 5d -m 0 -o journal_data_ordered /dev/block/mmcblk0p8
fsck.ext4 -Dfy /dev/block/mmcblk0p8
/sbin/busybox mount -t ext4 -o nosuid,nodev,noatime,nodiratime,barrier=0,nobh,data=ordered,noauto_da_alloc /dev/block/mmcblk0p8 /data
sync
echo ...............done...............
Semi-finished:
Flash journaling.zip via CWM to enable back journaling
Download
Download 'terminal emulator' from market and type the following to test if it works.
If 'has_journal' is present then journaling is enabled.
For /system
Code:
/system/bin/tune2fs -l /dev/block/mmcblk0p1 | grep features
For /cache
Code:
/system/bin/tune2fs -l /dev/block/mmcblk0p2 | grep features
For /data
Code:
/system/bin/tune2fs -l /dev/block/mmcblk0p8 | grep features
Please post feedback if it works for you (fully)!
nice good work!
Thanks!
Another easy, though more time consuming, way to re-enable journaling is to let CWM do it by a complete backup and restore.
(You can also switch between ext3 and ext4 by changing the file names in clockworkmod/backup/.../ and of course also in the nandroid.md5 file.)
Please post feedback if it works for you (especially for data partition)
Recently I became interested in dual booting my Atrix, mainly for the fun of it, and because I like the convenience of quickly reverting to a different ROM without having to restore it from backup. I would also like to evaluate the performance of my system with sdcard in the loop among other things.
From my web research, it appears that multiple attempts at dual booting the Atrix have been made without much success. I have heard of SafeStrap, but I'm the kind of person who wants to know what’s happening inside the black box. So I decided to try my hand by flashing CM9 to internal memory and CM7 to my Patriot 16GB Class 4 micro-SD card. I did all of this on Ubuntu 11.10 using GParted, Android SDK and several Perl and Bourne shell scripts that I either customized or created.
I probably could have done this on Windows (which for example has Atrix USB drivers whereas Ubuntu does not) and perhaps be able to use available space on my 10GB emmc to host additional ROMs. But in spite of the lack of drivers, I felt more comfortable having a full-up, dedicated *nix-based OS on hand to support the experiment.
I decided to to push a stable ROM to sdcard (in this case, CM7.2 RC1), one that runs well without any patches --- because a stock recovery tool wouldn't recognize it.
The experiment was successful as I now enjoy my 3GB CM7 build running from SD card with stable browser, keyboard and camera. And I can still use Joker's Kitchen Sink to explore some of the many possible ROM configurations without touching the CM7 build.
YouTube video (3:38) showing reboots from one ROM to the other: http://www.youtube.com/watch?v=31TPyAguQ60
Preliminaries (Ubuntu)
GParted and Perl installed
Android SDK for Linux (i386) installed http://developer.android.com/sdk/index.html
I download testsign.zip from http://forum.xda-developers.com/showthread.php?t=551711 , copy to Ubuntu <android-sdk-linux/tools> directory and extract zip there. This creates a testsign subfolder with testsign.jar file inside.
Atrix Filesystem Analysis
I boot my phone to CWM 5.0.2.0, open an Ubuntu terminal, get root (sudo -s), run adb shell and invoke the “edify” and “df” commands to view the current filesystem:
~ # edify
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null)
1 /boot emmc /dev/block/mmcblk0p11 (null)
2 /cache ext3 /dev/block/mmcblk0p15 (null)
3 /data ext3 /dev/block/mmcblk0p16 (null)
4 /sdcard vfat /dev/block/mmcblk1p1 (null)
5 /emmc vfat /dev/block/mmcblk0p18 (null)
6 /system ext3 /dev/block/mmcblk0p12 (null)
7 /recovery emmc /dev/block/mmcblk0p10 (null)
8 /osh ext3 /dev/block/mmcblk0p13 (null)
9 /preinstall ext3 /dev/block/mmcblk0p17 (null)
~ # df -a
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 417804 32 417772 0% /dev
devpts 0 0 0 0% /dev/pts
proc 0 0 0 0% /proc
sysfs 0 0 0 0% /sys
/dev/block/mmcblk0p15 645056 69020 543268 11% /cache
/dev/block/mmcblk0p16 2064208 129052 1830300 7% /data
/dev/block/mmcblk0p12 322516 238496 84020 74% /system
SD Card Partitioning
Next I get root on Ubuntu, connect SD card to PC, ensure SD card adapter switch is set to read/write, run GParted and shrink the vfat (fat32) partition to allow room for /system, /cache and /data in that order. Then I create these partitions as ext4 with sizes reasonably consistent with the existing filesystem on emmc.
Note: GParted did not see my internal (emmc) card, and it prefixed the sdcard partitions as “/dev/mmcblk0” instead of “/dev/mmcblk1”.
Now I exit GParted, pull sdcard from PC and reinsert into phone. Then I boot to CWM, connect phone to PC, enter adb shell and verify the new sdcard partition map using the onboard “parted” tool:
~ # parted /dev/block/mmcblk1
GNU Parted 1.8.8.1.179-aef3
Using /dev/block/mmcblk1
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print
Model: SD SU16G (sd/mmc)
Disk /dev/block/mmcblk1: 15.9GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 4194kB 10.7GB 10.7GB primary fat32 lba
2 10.7GB 11.1GB 346MB primary ext4
3 11.1GB 11.8GB 692MB primary ext4
4 11.8GB 14.0GB 2217MB primary ext4
quit
~#
Clone CM7 to SD Card
Presently I have CM7.2 RC1 installed in emmc, and I want to clone this ROM to sdcard. But I first ensure that my phone is adequately charged, especially if I will be in CWM for a long time. My experience is that CWM can drain the battery, even when phone is connected to a powered USB hub.
I boot to CWM 5.0.2.0, open Ubuntu terminal on PC, get root (sudo -s), run adb shell and mount the new CM7 sdcard partitions.
Then I clone ROM to sdcard. (I did this over ADB, though in retrospect I probably could have done it more quickly with terminal emulator.)
~ # dd if=/dev/block/mmcblk0p12 of=/dev/block/mmcblk1p2
655360+0 records in
655360+0 records out
335544320 bytes (320.0MB) copied, 140.786369 seconds, 2.3MB/s
~ # dd if=/dev/block/mmcblk0p15 of=/dev/block/mmcblk1p3
1310720+0 records in
1310720+0 records out
671088640 bytes (640.0MB) copied, 282.791984 seconds, 2.3MB/s
~ # dd if=/dev/block/mmcblk0p16 of=/dev/block/mmcblk1p4
4194304+0 records in
4194304+0 records out
2147483648 bytes (2.0GB) copied, 898.662170 seconds, 2.3MB/s
Since the data partition is fairly large, I ending up using the “cat” command, which cut the transfer time to about 6 minutes….
~ # cat /dev/block/mmcblk0p16 > /dev/block/mmcblk1p4
Flash CM9 to Internal Memory
Now I push Joker CM9 beta 0.6.0 zip to sdcard and install via CWM...
[email protected]:~/Desktop# adb push beta-0.6.0-cm-9.0.0-RC0-olympus-UNOFFICIAL-signed.zip /sdcard/Download
1286 KB/s (125162795 bytes in 95.013s)
[email protected]:~/Desktop#
Modify CM7 Ramdisk, Re-pack ROM Zip and Re-sign
Now I modify ramdisk in the CM7 boot.img to mount the sdcard /system, /cache and /data partitions at boot time. To help streamline the mod, I wrote custom Perl scripts based on the ones linked here:
http://android-dls.com/wiki/index.php?title=HOWTO:_Unpack,_Edit,_and_Re-Pack_Boot_Images
My Perl script “unpack-romzip.pl” actually starts with a baseline ROM, extracts boot.img and then p****s out kernel and ramdisk directory from boot.img. Here is the script in action...
[email protected]:~/Desktop# ./unpack-romzip.pl update-cm-7.2.0-RC1-olympus+gapps.zip
Extract boot.img from update-cm-7.2.0-RC1-olympus+gapps.zip
Archive: update-cm-7.2.0-RC1-olympus+gapps.zip
inflating: boot.img
Rename boot.img to update-cm-7.2.0-RC1-olympus+gapps.img
kernel written to update-cm-7.2.0-RC1-olympus+gapps.img-kernel
ramdisk written to update-cm-7.2.0-RC1-olympus+gapps.img-ramdisk.cpio.gz
Extract ramdisk zip to directory: update-cm-7.2.0-RC1-olympus+gapps.img-ramdisk
513 blocks
Delete intermediate file: update-cm-7.2.0-RC1-olympus+gapps.img-ramdisk.cpio.gz
Results...
-rw-r--r-- 1 root root 2574336 2012-05-03 19:12 update-cm-7.2.0-RC1-olympus+gapps.img-kernel
drwxr-xr-x 8 root root 4096 2012-05-03 19:12 update-cm-7.2.0-RC1-olympus+gapps.img-ramdisk
In this experiment, the only ramdisk file I will modify is init.olympus.rc: I do so by commenting out the /system, /cache and /data mount commands for the emmc partitions and creating equivalent mount commands for the sdcard partitions...
# mount ext4 /dev/block/mmcblk0p12 /system noatime nodiratime wait ro barrier=1
# mount ext4 /dev/block/mmcblk0p16 /data nosuid nodev noatime nodiratime wait barrier=1 noauto_da_alloc
# mount ext4 /dev/block/mmcblk0p15 /cache nosuid nodev noatime nodiratime wait barrier=1 noauto_da_alloc
mount ext4 /dev/block/mmcblk1p2 /system noatime nodiratime wait ro barrier=1
mount ext4 /dev/block/mmcblk1p4 /data nosuid nodev noatime nodiratime wait barrier=1 noauto_da_alloc
mount ext4 /dev/block/mmcblk1p3 /cache nosuid nodev noatime nodiratime wait barrier=1 noauto_da_alloc
Now I back out of ramdisk and run my other Perl script: repack-romzip.pl, which combines ramdisk and kernel to obtain a new boot image and then generates a repacked ROM zip. Here is the script in action...
[email protected]:~/Desktop# ./repack-romzip.pl update-cm-7.2.0-RC1-olympus+gapps.zip
Repack Android boot image from kernel file and ramdisk directory and roll into new ROM zip
Run cpio and gzip on ramdisk directory
514 blocks
Make boot image from kernel file and ramdisk cpio zip
Updated boot.img...
-rw-r--r-- 1 root root 2725888 2012-05-03 19:20 update-cm-7.2.0-RC1-olympus+gapps-repack.img
Copy update-cm-7.2.0-RC1-olympus+gapps.zip to update-cm-7.2.0-RC1-olympus+gapps-repack.zip
Add updated boot.img to update-cm-7.2.0-RC1-olympus+gapps-repack.zip
updating: boot.img
zip warning: Local Entry CRC does not match CD: boot.img
(deflated 0%)
I am almost ready to re-sign my CM7 ROM zip. But I first need to modify its updater-script to mount /system to /dev/block/mmcblk1p2 (sdcard) instead of /dev/block/mmcblk0p12 (emmc). So I edit the updater-script and change:
format("ext4", "EMMC", "/dev/block/mmcblk0p12");
mount("ext4", "EMMC", "/dev/block/mmcblk0p12", "/system");
to
format("ext4", "EMMC", "/dev/block/mmcblk1p2");
mount("ext4", "EMMC", "/dev/block/mmcblk1p2", "/system");
Now I invoke the java command below to re-sign the CM7 zip:
[email protected]:~/Desktop# java -classpath ~/android-sdk-linux/tools/testsign/testsign.jar testsign update-cm-7.2.0-RC1-olympus+gapps-repack.zip update-cm-7.2.0-RC1-olympus+gapps-repack-signed.zip
[email protected]:~/Desktop# ls -ld *.zip
-rw-rw-r-- 1 robert robert 125162795 2012-05-03 18:05 beta-0.6.0-cm-9.0.0-RC0-olympus-UNOFFICIAL-signed.zip
-rw-r--r-- 1 root root 105000424 2012-05-03 19:23 update-cm-7.2.0-RC1-olympus+gapps-repack-signed.zip
-rw-r--r-- 1 root root 104987732 2012-05-03 19:20 update-cm-7.2.0-RC1-olympus+gapps-repack.zip
-rw------- 1 robert robert 104999357 2012-05-01 20:10 update-cm-7.2.0-RC1-olympus+gapps.zip
Then I transfer the re-signed zip to sdcard/Download, reboot to CWM and install.
Test Results
I do some preliminary testing by attempting to boot CM9 from Joker's CM9 1.0GHz v4 boot image file:
[email protected]:~/Desktop# fastboot boot cm9-1.0-atrixv4-boot.img
downloading 'boot.img'...
OKAY [ 0.204s]
booting...
OKAY [ 0.002s]
finished. total time: 0.206s
Success. Now I try CM7...
[email protected]:~/Desktop# fastboot boot update-cm-7.2.0-RC1-olympus+gapps-repack.img
downloading 'boot.img'...
OKAY [ 0.182s]
booting...
OKAY [ 0.002s]
finished. total time: 0.185s
And to my delight, CM7 boots
Finally I install Script Manager and push my custom boot-rom.sh to sdcard/Boot. This script offers four options: Current ROM (default), CM9, CM7 or CWM recovery. Rebooting to the other ROM is just a few keystrokes away, though I must configure Script Manager to run boot-rom.sh as superuser (press SU button on configuration screen).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Elapsed times…
Execution of boot-rom.sh on CM7 to CM9 welcome screen: 44 sec.
Execution of boot-rom.sh on CM9 to CM7 welcome screen: 45 sec.
Conclusions and Thoughts
My Atrix dual boot capability offers an efficient means to circumvent instabilities in CM9 by providing a stable CM7 ROM to run from my sdcard. Of course there are limitations here in that a stock recovery won't recognize my CM7 build. But I'm fine with that since I probably won't patch.
I think it would be kind of interesting to push identical ROMs on emmc and sdcard and compare performance. I heard from a fellow engineer that Class 16 cards are now available.
It would also be interesting to explore refinements like multiple-boot from emmc and various forms of automation.
This is a work in progress and I appreciate your constructive feedback.
YouTube video (3:38) showing reboots from one ROM to the other: http://www.youtube.com/watch?v=31TPyAguQ60
Credits
jokersax11 @ xda, ghost_og @ xda,
Photon Dev Team, Atrix Dev Team
Koush
Other credits embedded in this post
Holy. ****.
Sent from my MB860 using XDA
Wow thanks for the info. I wanted to give this a try but I had a question. If I partition my sdcard to the specs you provided, can I flash your resigned cm7 zip and it would flash it to my sdcard. If that is possible, could you post the modified cm7?
Wow....waiting is coming.......
Something you could look into is moving the apps to SD and let each rom build its own dalvik cache. Then you can keep your apps between both builds
Sent from my MB855 using XDA
I think you better get into developing roms, because it sounds like you have an amazing amount of knowledge with this technology. Something I can only hope to achieve, lol.
I think you should make a full length 45 min youtube clip to explain everything, but I know that's not gonna happen, so see how much you can cram into 5 minutes! lol
Nice job man, outstanding progression!
Blur ROM with WebTop and CM9
Is it possible to switch between Blur based ROM with WebTop and CM9?
#!/system/bin/sh
mount -o remount,rw /dev/block/mmcblk0p1 /system//挂载/system为可写
busybox md5sum -cs /system/boot/md5 && CHANGE=0 || CHANGE=1//判断boot.img是否更新
echo $CHANGE
if [ "$CHANGE" = "1" ]
then
cat /dev/block/mmcblk0p5 > /data/boot1.img
busybox md5sum /system/build.prop > /system/boot/md5
echo "Creat new boot done!"
fi
if [ -e /data/boot2.img ]//判断另外的系统是否更新boot.img
then
busybox mv /data/boot2.img /system/boot/boot2.img
echo "Backup new boot done!"
fi
cat /system/boot/boot2.img > /dev/block/mmcblk0p5
fdisk /dev/block/mmcblk0 < /system/bin/fdisk1.sh
///////////////////同fixuid
mkdir /data/lib
chmod 0777 /data/lib
cat /data/system/packages.xml | grep 'package name="'| awk -F"\"" '{print $2}' > /data/packages.list
awk -F" " '{print "rm /data/data/"$1"/lib"}' /data/packages.list > /data/cx.sh
cat /system/bin/noshare|while read fname
do
echo "rm $fname-2/lib" >>/data/cx.sh
done
awk -F" " '{print "mkdir /data/lib/"$1}' /data/packages.list >> /data/cx.sh
awk -F" " '{print "mv /data/data/"$1"/lib/ /data/lib/"$1"/"}' /data/packages.list >> /data/cx.sh
busybox chown -R 1000.1000 /data/lib
awk -F" " '{print "rm -R /data/data/"$1"/lib"}' /data/packages.list >> /data/cx.sh
cat /system/bin/noshare|while read fname
do
echo "rm -R $fname-2/lib" >>/data/cx.sh
done
chmod 0777 /data/cx.sh
/data/cx.sh
////////////////////////////////////////////////////移动第二系统数据为主数据
cat /system/bin/noshare|while read fname
do
mv $fname "$fname-1"
mv "$fname-2" $fname
done
cat /data/noshare|while read fname//移动不需要共享的数据
do
mv $fname "$fname-1"
mv "$fname-2" $fname
done
echo "Move data done!"
/////////////////////////同fixuid
awk -F" " '{print "ln -s /data/lib/"$1" /data/data/"$1"/lib"}' /data/packages.list > /data/cx.sh
cat /data/system/packages.xml | grep 'package name=\"'| awk -F"\"" '{print $2" "$18}' | awk -F" " '{print "busybox chown -R "$2"."$2" /data/data/"$1}' >> /data/cx.sh
chmod 0777 /data/cx.sh
/data/cx.sh
echo "Move UID done!"
reboot
kingme__hu said:
#!/system/bin/sh
mount -o remount,rw /dev/block/mmcblk0p1 /system//挂载/system为可写
busybox md5sum -cs /system/boot/md5 && CHANGE=0 || CHANGE=1//判断boot.img是否更新
echo $CHANGE
if [ "$CHANGE" = "1" ]
then
cat /dev/block/mmcblk0p5 > /data/boot1.img
busybox md5sum /system/build.prop > /system/boot/md5
echo "Creat new boot done!"
fi
if [ -e /data/boot2.img ]//判断另外的系统是否更新boot.img
then
busybox mv /data/boot2.img /system/boot/boot2.img
echo "Backup new boot done!"
fi
cat /system/boot/boot2.img > /dev/block/mmcblk0p5
fdisk /dev/block/mmcblk0 < /system/bin/fdisk1.sh
///////////////////同fixuid
mkdir /data/lib
chmod 0777 /data/lib
cat /data/system/packages.xml | grep 'package name="'| awk -F"\"" '{print $2}' > /data/packages.list
awk -F" " '{print "rm /data/data/"$1"/lib"}' /data/packages.list > /data/cx.sh
cat /system/bin/noshare|while read fname
do
echo "rm $fname-2/lib" >>/data/cx.sh
done
awk -F" " '{print "mkdir /data/lib/"$1}' /data/packages.list >> /data/cx.sh
awk -F" " '{print "mv /data/data/"$1"/lib/ /data/lib/"$1"/"}' /data/packages.list >> /data/cx.sh
busybox chown -R 1000.1000 /data/lib
awk -F" " '{print "rm -R /data/data/"$1"/lib"}' /data/packages.list >> /data/cx.sh
cat /system/bin/noshare|while read fname
do
echo "rm -R $fname-2/lib" >>/data/cx.sh
done
chmod 0777 /data/cx.sh
/data/cx.sh
////////////////////////////////////////////////////移动第二系统数据为主数据
cat /system/bin/noshare|while read fname
do
mv $fname "$fname-1"
mv "$fname-2" $fname
done
cat /data/noshare|while read fname//移动不需要共享的数据
do
mv $fname "$fname-1"
mv "$fname-2" $fname
done
echo "Move data done!"
/////////////////////////同fixuid
awk -F" " '{print "ln -s /data/lib/"$1" /data/data/"$1"/lib"}' /data/packages.list > /data/cx.sh
cat /data/system/packages.xml | grep 'package name=\"'| awk -F"\"" '{print $2" "$18}' | awk -F" " '{print "busybox chown -R "$2"."$2" /data/data/"$1}' >> /data/cx.sh
chmod 0777 /data/cx.sh
/data/cx.sh
echo "Move UID done!"
reboot
Click to expand...
Click to collapse
What's this? I don't... I... can't comprehend...
Anyone able to make an auto script to help beginners and confused people like me? I can't follow through half of the OP's instructions.... not used to using SDK and terminal/ADB.
Woooow!! This is epic dude! I could have a Blur rom on my sd and a custom rom on my internal, to keep webtop functionality when i want! A Windows guide would be prettt awesome!
Sent from my MB860 using XDA
Amazing!
This is amazing!! Thanks a lot for your work!
This could make things MUCH easier for me when testing both CM9 and CM7 Neutrino.
I hope this project matures by the time my exams finish, like as Jokersax11 said, the ability to save dalvik cache would be awesome.
Massive thumbs up from me here
This really is some fantastic development! I am beyond impressed. You my friend should join the league of developer jedi's.
Fantastic work!
Now, if this could only somehow be transformed into a zip...LOL
J-Roc said:
This really is some fantastic development! I am beyond impressed. You my friend should join the league of developer jedi's.
Fantastic work!
Now, if this could only somehow be transformed into a zip...LOL
Click to expand...
Click to collapse
+1 for the ZIP and making this easier to use for the Ordinary good people like Some of Us
Amazing work ! Keep up
Thanks to your guide I've made it to cloning to sdcard all with windows. Will post back with tutorial if I can finish the job. Thank you for your amazing work!
Maybe you can work together with BootManager dev to support Atrix...
Dude, you're awesome. I think this is the final little push I needed to get me computer set up to dual boot Ubuntu and windows definitely going to be worth it now. Thanks for the work
KH_Lionheart said:
Dude, you're awesome. I think this is the final little push I needed to get me computer set up to dual boot Ubuntu and windows definitely going to be worth it now. Thanks for the work
Click to expand...
Click to collapse
You are quite welcome!
YouTube video (3:38) demonstrating reboot from one ROM to the other: http://www.youtube.com/watch?v=31TPyAguQ60
Sweet!
Seeing as how you had this on the back burner, I am SO glad you got those kernel building issues squashed. Awesome job man!
J-Roc said:
This really is some fantastic development! I am beyond impressed. You my friend should join the league of developer jedi's.
Fantastic work!
Now, if this could only somehow be transformed into a zip...LOL
Click to expand...
Click to collapse
tasadar said:
+1 for the ZIP and making this easier to use for the Ordinary good people like Some of Us
Amazing work ! Keep up
Click to expand...
Click to collapse
Here's the problem: I needed GApps on CM7 to provide the tools needed to support my experiment. However, Google has requested that copyrighted material be removed from CM7. So while I was able to streamline the integration of GApps with CM7, I could not provide the ROM, only the procedure. See http://forum.xda-developers.com/showthread.php?p=25588129#post25588129.
IDK, maybe Google will soften up a bit...?