Database Develop

HELP!!! Please! BRICKED!!!

Hey so I have the L90 D415 and I flashed the partition tool to get more data but i didn't realize that it was broken for my device and now im having issues.... This is how it went. I used the tool and it got to 70% and rebooted back into twrp so i knew that wasnt right so i flashed the next one that was supposed to be fixed and it did flash completely but for some reason it erased twrp, installed cwm and now i cant get into either. I had flashed stock using cwm before i chose to reboot but im still not able to boot up(stuck on LG logo). So to recap I can't get into recovery at all. I have fastboot. flashtool wont work(wont read phone in usb mode cuz im not booted) and im stuck on the LG boot screen. Please help me.

JamesB3 said:
Hey so I have the L90 D415 and I flashed the partition tool to get more data but i didn't realize that it was broken for my device and now im having issues.... This is how it went. I used the tool and it got to 70% and rebooted back into twrp so i knew that wasnt right so i flashed the next one that was supposed to be fixed and it did flash completely but for some reason it erased twrp, installed cwm and now i cant get into either. I had flashed stock using cwm before i chose to reboot but im still not able to boot up(stuck on LG logo). So to recap I can't get into recovery at all. I have fastboot. flashtool wont work(wont read phone in usb mode cuz im not booted) and im stuck on the LG boot screen. Please help me.
Click to expand...
Click to collapse
Well duh you didnt wipe the data of the rom before you flashed so of couse you are gonna be boot. Flash with the kdz offline flash then when you are done flashing pull out battery and use special button combo to factory reset it so that you can boot in to phone but you will lose all data excluding the ones on your EXTERNAL sd card.

krchi said:
Well duh you didnt wipe the data of the rom before you flashed so of couse you are gonna be boot. Flash with the kdz offline flash then when you are done flashing pull out battery and use special button combo to factory reset it so that you can boot in to phone but you will lose all data excluding the ones on your EXTERNAL sd card.
Click to expand...
Click to collapse
I did though. I wiped system, data, cache, dalvik and internal.
What do you mean by offline flash?(sorry first LG. I had a Huawei before this)

JamesB3 said:
I did though. I wiped system, data, cache, dalvik and internal.
What do you mean by offline flash?(sorry first LG. I had a Huawei before this)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2625044 follow the same steps but use our kdz for lg l90

4. go to C:\ProgramData\LGMOBILEAX
remove all files and folder
5. copy all files and folders from LGMOBILEAX that you unzip from step2 to C:\ProgramData\LGMOBILEAX
I ran into a problem. I cannot find the directory mentioned in #4.

JamesB3 said:
4. go to C:\ProgramData\LGMOBILEAX
remove all files and folder
5. copy all files and folders from LGMOBILEAX that you unzip from step2 to C:\ProgramData\LGMOBILEAX
I ran into a problem. I cannot find the directory mentioned in #4.
Click to expand...
Click to collapse
You need to make sure that you have hidden files on

yeah i figured it out with google.
I have tried both methods on the guide and have came up short both times. I keep receiving this error(In screenshot).

I am desperate for any fix to this problem. I have access to fastboot and download mode. That is honestly all i got. When my phone is on the LG screen my computer reads it but the lg flash tool has connection issues. Please help me figure this out. I really need my phone back.

JamesB3 said:
I am desperate for any fix to this problem. I have access to fastboot and download mode. That is honestly all i got. When my phone is on the LG screen my computer reads it but the lg flash tool has connection issues. Please help me figure this out. I really need my phone back.
Click to expand...
Click to collapse
Go on the lg website and find lg l90 d415 drivers and install them if you got that far its most likely just driver issues.

JamesB3 said:
I am desperate for any fix to this problem. I have access to fastboot and download mode. That is honestly all i got. When my phone is on the LG screen my computer reads it but the lg flash tool has connection issues. Please help me figure this out. I really need my phone back.
Click to expand...
Click to collapse
Also check if you have your computer enabled for all drivers..
Some drivers do not boot because the certificate is not correctly assigned.
If you have a PC running Windows, on boot press F8 and select disable driver certification verify.
Try again after this.

razoract said:
Also check if you have your computer enabled for all drivers..
Some drivers do not boot because the certificate is not correctly assigned.
If you have a PC running Windows, on boot press F8 and select disable driver certification verify.
Try again after this.
Click to expand...
Click to collapse
I got my phone fixed!!! I flashed twrp through fastboot then used the partition tool for our device to get my partitions back and i flashed lollipop! Thanks for all your help you guys!!! I am trying to help my friend fix his LG Volt. Can someone post the laf.img onhere for me please? thats all I need to get his phone working.

Urgent advice needed on Razr i XT890

hi, my phone Razr i XT890 is showing the Red Moto Logo, I tried to factory reset by going into fastboot also but nothing happened, I can find many thread here about the same problem but nothing conclusive could be found in those threads, hence I sent my phone for repairs, the technician hooked it up to a computer and said that most likely it is a software issue and the phone would be ok, after waiting for an hour I was told that the emmc has died and it cannot be replaced and the only solution would be to change the motherboard, since the mother board is not avaible in the market I looked it up on aliexpress and it costs around 70$ where as a new/refurbished phones are listed for 75$, need you guys advice on whether it can be repaired or not and if yes then how. I am a regular user and not an expert like you guys so if you suggest any thing plz do it in detail. FYI its a factory unlocked phone which had jelly bean OS and I never rooted it or did any hanky panky to it. Thanks

What u could try to test if the mechanic is right (I suppose he is), is to flash stock firmware by hand and see what the device gives for error.
If the error is an i/o error the emmc is corrupted and we can't help that. It will need a replacement of the motherboard.
To test it, extract all images from the stock firmware. Then flash them while your Phone is in fastboot modes and connected to your pc, like this:
Use a compatible fastboot executable like mfastboot.
- fastboot flash boot boot_signed
- fastboot flash recovery recovery_signed
- fastboot flash system system_signed
- fastboot erase cache
- fastboot erase userdata
Every one of them should return an "OK". If there is an error in one of them that partition is most likely damaged and if u can't boot in recovery there is most likely no turning back.

Hazou said:
What u could try to test if the mechanic is right (I suppose he is), is to flash stock firmware by hand and see what the device gives for error.
If the error is an i/o error the emmc is corrupted and we can't help that. It will need a replacement of the motherboard.
To test it, extract all images from the stock firmware. Then flash them while your Phone is in fastboot modes and connected to your pc, like this:
Use a compatible fastboot executable like mfastboot.
- fastboot flash boot boot_signed
- fastboot flash recovery recovery_signed
- fastboot flash system system_signed
- fastboot erase cache
- fastboot erase userdata
Every one of them should return an "OK". If there is an error in one of them that partition is most likely damaged and if u can't boot in recovery there is most likely no turning back.
Click to expand...
Click to collapse
ok, thanks for the suggestion and say if they all come ok then?? and If an error comes in one of them then what ?? I will only be able to post in detail tomorrow after I have visited the mechanic.

cooljatt18 said:
ok, thanks for the suggestion and say if they all come ok then?? and If an error comes in one of them then what ?? I will only be able to post in detail tomorrow after I have visited the mechanic.
Click to expand...
Click to collapse
If it all says OK, u should have a working device. No doubt about that. But if one of them doesn't we found the issue. Most likely i/o. Can u still boot to recovery? Or is that even impossible, because u said u tried a factory reset?

Hazou said:
If it all says OK, u should have a working device. No doubt about that. But if one of them doesn't we found the issue. Most likely i/o. Can u still boot to recovery? Or is that even impossible, because u said u tried a factory reset?
Click to expand...
Click to collapse
I tried factory reset and the same screen appeared, then I tried recovery option in fastboot menu rather then factory reset the android robot with exclamation mark appeared when I pressed volume key I got some options partition cache etc I did that and also there was an option erase all data did that to got message both times that it has been done, then I chose the option of restart and again got the red logo screen !

cooljatt18 said:
I tried factory reset and the same screen appeared, then I tried recovery option in fastboot menu rather then factory reset the android robot with exclamation mark appeared when I pressed volume key I got some options partition cache etc I did that and also there was an option erase all data did that to got message both times that it has been done, then I chose the option of restart and again got the red logo screen !
Click to expand...
Click to collapse
This is most likely solvable. Try that flash methods a few post above and see what happens s

Hazou said:
This is most likely solvable. Try that flash methods a few post above and see what happens s
Click to expand...
Click to collapse
so I went to the mechanic today and told him to flash with stock firmware and he told be that he did not have it !! Since the phone was never officially launched in my region I am guessing hardly any mechanic would have it, is there any place from where I can download it

cooljatt18 said:
so I went to the mechanic today and told him to flash with stock firmware and he told be that he did not have it !! Since the phone was never officially launched in my region I am guessing hardly any mechanic would have it, is there any place from where I can download it
Click to expand...
Click to collapse
Which country and carrier is it from? That way I can post the link to the correct firmware file for your phone.
Sent from my XT1095 using Tapatalk

AGISCI said:
Which country and carrier is it from? That way I can post the link to the correct firmware file for your phone.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
It is an unlocked phone, not linked to any carrier I am not 100% sure but most likely England/Great Britain, I remember the Reading GB as in short for Great Britain in the firmware name once !

cooljatt18 said:
It is an unlocked phone, not linked to any carrier I am not 100% sure but most likely England/Great Britain, I remember the Reading GB as in short for Great Britain in the firmware name once !
Click to expand...
Click to collapse
http://www.filefactory.com/file/6b396l5ar4tf/CFC_9.8.2I-50_SMI-26_S7_USASMIJBORAGB.xml.zip
Sent from my XT1095 using Tapatalk

AGISCI said:
http://www.filefactory.com/file/6b396l5ar4tf/CFC_9.8.2I-50_SMI-26_S7_USASMIJBORAGB.xml.zip
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
thanks a ton!!!

hi, guys sorry for posting so late, was super busy, any how haven't got a mechanic to flash the phone, guess I will have to do it myself, request you to answer my queries
.1) a mechanic to whom I went convinced me to believe that the problem was due to a faulty battery and he could fix it in 5 mins flat, He opened the phone did some tinkering with it, I am not sure what but the phone was in same condition ie Red logo on booting. Was very disappointed came back home and I tried to restore it through fast boot and I noticed that the Battery Current was coming as 4.1 V earlier it was 3.7 !!! I am sure that the mechanic messed it up. Now my question is will it harm the phone, battery or any other part?? Should I just leave it the way it is ie 4.1V and not try to rectify it to bring it to 3.7V.
.2) I am not able to get a mechanic who can flash the phone as suggested in previous posts, pl tell how I can do it myself, I am a newbie at this and have zero knowledge of the process, pl tell what all software are needed! And hardware if any. All I have got currently is the firmware posted in previous posts.
Thanks

Bricked Mi3 - Showing QHUSUB Bulk in PC

I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.

Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Don't worry have you backup you data?
if you have, just install the driver for qhusb
then your phone should be able to recognises by MIflash then flash any fastboot rom, You phone should be good to go.

I had a similar issue but i tried to hold the power button for like 30 seconds and the phone booted. If it didn't work, you should follow this thread: en.miui.com/forum.php?mod=viewthread&tid=73348&highlight=Mi3%2Bunbrick&mobile=no

partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone

murattiy said:
partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone
Click to expand...
Click to collapse
Did you personally tried that? Because flash all bat do uses fastboot to flash, which can't be accessed.
I wonder whether the other one u poster doesn't use fastboot, cant check the file content atm

I have tried many times
last times tried 3 hours ago, for alpha 5.12.24
my video under explain
http://m.youtube.com/watch?v=fSl9xrR_J4g

@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol

you need to do İnstall spacial flash_all.batt change to in flash_all.batt "cancro_global_images_V7.0.5.0.KXDMICI_20151016.0000.3_4.4_global"
dont use miFlash .. enough u clik speical flash_all.batt

If your device not boot into fastboot/recovery mode press power button for around 30-40 seconds .

and still not boot into fastboot/recovery mode
battery cable exist than try.. i tried many times))

Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!

From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?

Prince Chandela said:
From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!

coolkillermax said:
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
Click to expand...
Click to collapse
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?

回复: Bricked Mi3 - Showing QHUSUB Bulk in PC
Prince Chandela said:
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?
Click to expand...
Click to collapse
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4

coolkillermax said:
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4
Click to expand...
Click to collapse
flash miui fastboot rom then

Prince Chandela said:
flash miui fastboot rom then
Click to expand...
Click to collapse
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking

coolkillermax said:
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking
Click to expand...
Click to collapse
can you boot in recovery now?

Prince Chandela said:
can you boot in recovery now?
Click to expand...
Click to collapse
No...
http://forum.xda-developers.com/xiaomi-mi-3/help/mi3w-lost-partition-userdata-img-t3293583

Me_Ashish_ said:
@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol
Click to expand...
Click to collapse
Really need your help..
Can you explain it further?
please..

ASUS ROG2 SOFT BRICK

Hi ,
I have an ASUS ROG2 and I'm experiencing quite a problem here , I would like to know if this can still be rescue or not? or maybe I'm missing some steps here. here's what I've done so far.
Before it got to this dilemma my phone is suffering from autoshutdown so i rooted my phone using magisk and applied the thermal mode by one of the OP here. everything is working fine , the phone is not shutting down until today. it suddenly restart before me and it is stuck in ROG Logo.
what I've done.
1) i flash the stock boot img for my firmware version 2009.49 using fastboot flash boot 2009.49stock.img both slot A & B then followed by fastboot reboot so it can boot to system but it is still stock at the ROG Logo
2) i downloaded a RAW Firmware of 2009.49 , put my phone into fastboot mode. i made sure it was detected by the PC using the command fastboot devices and surely it was. i execute the flashall_AFT.cmd and waited , after it finishes my phone reboots but still stuck at the ROG Logo and here's the problem.
I reboot my phone into bootloader , scroll to Recovery after pressing Power button to select it , it boots and stuck at the ROG Logo at this point i'm confused since i need to factory reset it. so i downloaded TWRP for ROG2 Android 10 the one i usually use then i tried to boot from it using fastboot boot twrp10.img , it only boots and stuck at the ROG Logo again
3) I tried to flash a firmware using EDL mode , everything went well without any errors and there's the success message in Xiaomiflashtool , i reboot the phone to recovery and it is still stuck in ROG Logo.
any guesses? I'm kinda lost here since both RAW and EDL are not working.

KnowThyPro said:
Hi ,
I have an ASUS ROG2 and I'm experiencing quite a problem here , I would like to know if this can still be rescue or not? or maybe I'm missing some steps here. here's what I've done so far.
Before it got to this dilemma my phone is suffering from autoshutdown so i rooted my phone using magisk and applied the thermal mode by one of the OP here. everything is working fine , the phone is not shutting down until today. it suddenly restart before me and it is stuck in ROG Logo.
what I've done.
1) i flash the stock boot img for my firmware version 2009.49 using fastboot flash boot 2009.49stock.img both slot A & B then followed by fastboot reboot so it can boot to system but it is still stock at the ROG Logo
2) i downloaded a RAW Firmware of 2009.49 , put my phone into fastboot mode. i made sure it was detected by the PC using the command fastboot devices and surely it was. i execute the flashall_AFT.cmd and waited , after it finishes my phone reboots but still stuck at the ROG Logo and here's the problem.
I reboot my phone into bootloader , scroll to Recovery after pressing Power button to select it , it boots and stuck at the ROG Logo at this point i'm confused since i need to factory reset it. so i downloaded TWRP for ROG2 Android 10 the one i usually use then i tried to boot from it using fastboot boot twrp10.img , it only boots and stuck at the ROG Logo again
3) I tried to flash a firmware using EDL mode , everything went well without any errors and there's the success message in Xiaomiflashtool , i reboot the phone to recovery and it is still stuck in ROG Logo.
any guesses? I'm kinda lost here since both RAW and EDL are not working.
Click to expand...
Click to collapse
You could try booting into TWRP 3.4.0-0 Q Unofficial by mauronofrio without flashing ( fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img ) , then copy the zip over to root of internal storage, either 2009.49 or lastest 2012.65, from here. Be sure to check during flash which slot gets flashed first. Then repeat the process, booting twrp so that you can flash the other inactive slot. If you want to be sure you have changed slots, click on reboot in twrp and see which is active before flashing. Good luck
Hopefully flashing both slots successfully will do it. Let us know how you get on.

reg66 said:
You could try booting into TWRP 3.4.0-0 Q Unofficial by mauronofrio without flashing ( fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img ) , then copy the zip over to root of internal storage, either 2009.49 or lastest 2012.65, from here. Be sure to check during flash which slot gets flashed first. Then repeat the process, booting twrp so that you can flash the other inactive slot. If you want to be sure you have changed slots, click on reboot in twrp and see which is active before flashing. Good luck
Hopefully flashing both slots successfully will do it. Let us know how you get on.
Click to expand...
Click to collapse
Hi Reg !
Thanks for replying , i think I'm using the official version of TWRP so I'll give this a try , i should overcome the obstacle of booting into TWRP..
I'll let you know the outcome.

KnowThyPro said:
Hi Reg !
Thanks for replying , i think I'm using the official version of TWRP so I'll give this a try , i should overcome the obstacle of booting into TWRP..
I'll let you know the outcome.
Click to expand...
Click to collapse
Any news?

reg66 said:
Any news?
Click to expand...
Click to collapse
I used the TWRP you've linked. and i'm afraid that it is stuck on the rog logo again..
what i've done. ' fastboot boot twrpQ3400.img ' after i sent that command , the phone reboots and instead of going to twrp , it goes to rog logo and stuck there.
is there anyway i could check if there's partition? it feels like the phone has no partition that's why it is always going back to the rog logo.

KnowThyPro said:
I used the TWRP you've linked. and i'm afraid that it is stuck on the rog logo again..
what i've done. ' fastboot boot twrpQ3400.img ' after i sent that command , the phone reboots and instead of going to twrp , it goes to rog logo and stuck there.
is there anyway i could check if there's partition? it feels like the phone has no partition that's why it is always going back to the rog logo.
Click to expand...
Click to collapse
Did you change the name of the twrp file? the fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img cmd must have an identical name to the file, which as the original should be twrp-3.4.0-0-I001D-Q-mauronofrio.img
and just to be sure, you have the twrp img in fastboot folder, correct?

reg66 said:
Did you change the name of the twrp file? the fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img cmd must have an identical name to the file, which as the original should be twrp-3.4.0-0-I001D-Q-mauronofrio.img
and just to be sure, you have the twrp img in fastboot folder, correct?
Click to expand...
Click to collapse
Yes i did rename it as twrpQ3400.img and yes also , it is in the same folder as my adb & fastboot folder enviroment.
i'll try a different approach maybe using QFIL? although i don't know where to start like finding the XML / Programmer or firehose..
any ideas?

KnowThyPro said:
Yes i did rename it as twrpQ3400.img and yes also , it is in the same folder as my adb & fastboot folder enviroment.
i'll try a different approach maybe using QFIL? although i don't know where to start like finding the XML / Programmer or firehose..
any ideas?
Click to expand...
Click to collapse
Well i'm running out of ideas, never used QFIL so wouldn't know. since you cannot boot into twrp (i'm assuming you didn't relock bootloader? twrp won't work with locked bootloader), you could try this thread. be sure to use the supplied 1910.35 images as it tried and tested. read posts 1 and 2 at the very least, post 2 has useful steps
if successful, you'll then need to update 1910.64 before android 10 2004.60 to start with, then up to latest

reg66 said:
Well i'm running out of ideas, never used QFIL so wouldn't know. since you cannot boot into twrp (i'm assuming you didn't relock bootloader? twrp won't work with locked bootloader), you could try this thread. be sure to use the supplied 1910.35 images as it tried and tested. read posts 1 and 2 at the very least, post 2 has useful steps
if successful, you'll then need to update 1910.64 before android 10 2004.60 to start with, then up to latest
Click to expand...
Click to collapse
yes , i didn't lock my bootloader since i can still see the bootloader unlock message.. i'm also running low in ideas , for worst it is a bricked phone at best. i'll check the link.
thanks for helping. i'll still update this thread to maybe update u as well.
edit: i checked the link , i already did the xiaomi flash tool approach on the link.. everything was a success with no errors... maybe i shud give qpst tool a try? although i'm not familiar using it.

KnowThyPro said:
yes , i didn't lock my bootloader since i can still see the bootloader unlock message.. i'm also running low in ideas , for worst it is a bricked phone at best. i'll check the link.
thanks for helping. i'll still update this thread to maybe update u as well.
edit: i checked the link , i already did the xiaomi flash tool approach on the link.. everything was a success with no errors... maybe i shud give qpst tool a try? although i'm not familiar using it.
Click to expand...
Click to collapse
did you remember to shut the phone down after successfully flashing, boot into recovery and wipe data, then reboot? as per the instructions...?

reg66 said:
did you remember to shut the phone down after successfully flashing, boot into recovery and wipe data, then reboot? as per the instructions...?
Click to expand...
Click to collapse
yes , ofcourse since the phone is in EDL mode the only way to shut it down is by using Power + volume up + volume down like around 15 seconds then phone will shutdown since the 9008 COM in device manager will be gone this means that it's no longer in EDL mode. i wait like 1minute before i power it up to recovery by power + volume down then scroll to recovery in bootloader. then with no luck still stuck to Rog logo..
it's like the recovery partition is gone...

KnowThyPro said:
yes , ofcourse since the phone is in EDL mode the only way to shut it down is by using Power + volume up + volume down like around 15 seconds then phone will shutdown since the 9008 COM in device manager will be gone this means that it's no longer in EDL mode. i wait like 1minute before i power it up to recovery by power + volume down then scroll to recovery in bootloader. then with no luck still stuck to Rog logo..
it's like the recovery partition is gone...
Click to expand...
Click to collapse
I've been googling for you dude but no joy yet.... will have another look tomorrow

reg66 said:
I've been googling for you dude but no joy yet.... will have another look tomorrow
Click to expand...
Click to collapse
Thanks man , i'm searching for the qfil approach but i'm getting a sahara error. currently searching for fixes
edit : i manage to boot the phone using the link you've provided by using QFIL approach and not thru XiaomiFlashTool
the phone boots successfully and i can use the recovery again ! although there's a problem , it can't read my sim card and everything is like stock android without any skins or what.. i used the RAW firmware to update it but the problem with stuck logo is back :/
gonna re-flash using QFIL and i'll check some more ~ maybe use TWRP and flash the firmware there no?
edit: the one from the link is not working , stuck at rog logo.. but the one from the internet i was able to boot to system but can't detect simcard , also when plugging to PC it will go to crashdump mode.
also can't flash TWRP will result in stuck at ROG logo :/

was able to boot the phone but can't connect to wifi and is locked by google frp :/ any guides i can follow to remove that FRP without wifi connection ?

Sorry bud, really not sure what's going on with your phone or know much more. Good luck with it tho

KnowThyPro said:
was able to boot the phone but can't connect to wifi and is locked by google frp :/ any guides i can follow to remove that FRP without wifi connection ?
Click to expand...
Click to collapse
Actually, if you now have recovery, what about booting into twrp and flashing lastest 2012.65 zip from asus website, twice - both slots. see if that fixes your wifi issue
As you said using the QFIL approach worked to boot into system and recovery is back - boot to twrp from that state

KnowThyPro said:
Thanks man , i'm searching for the qfil approach but i'm getting a sahara error. currently searching for fixes
edit : i manage to boot the phone using the link you've provided by using QFIL approach and not thru XiaomiFlashTool
the phone boots successfully and i can use the recovery again ! although there's a problem , it can't read my sim card and everything is like stock android without any skins or what.. i used the RAW firmware to update it but the problem with stuck logo is back :/
gonna re-flash using QFIL and i'll check some more ~ maybe use TWRP and flash the firmware there no?
edit: the one from the link is not working , stuck at rog logo.. but the one from the internet i was able to boot to system but can't detect simcard , also when plugging to PC it will go to crashdump mode.
also can't flash TWRP will result in stuck at ROG logo :/
Click to expand...
Click to collapse
I think my i messed my phone like yours. Can you provide me step by step? I have tried those step one by one but still stuck at rog logo

(SOLVED) RoG 3 Loops On Logo After Flashing Raw

Hi Guys.i need Help My Rog Phone Doesnt Start After Flashing Latest Raw Or Any RaW.
Phone loops on rog logo several Times and after that Only Shows Csc fastboot mod.bootloader is locked.any way To unlock without Debugging mod ?Bcoz i cant access it Now.Phone Is On Dead Mood xd
I flashed With AFT Too In the end It says Xrom Check Faild..!is this the Problam?

Unlock bootloader with official ASUS unlocker tool (may need to factory reset 1st if cannot unbrick it)

lvl0rde said:
Hi Guys.i need Help My Rog Phone Doesnt Start After Flashing Latest Raw Or Any RaW.
Phone loops on rog logo several Times and after that Only Shows Csc fastboot mod.bootloader is locked.any way To unlock without Debugging mod ?Bcoz i cant access it Now.Phone Is On Dead Mood xd
I flashed With AFT Too In the end It says Xrom Check Faild..!is this the Problam?
Click to expand...
Click to collapse
Yes if Xrom check failed that's a problem. Flash again and try using flash raw & wipe data and echo off the script so you can catch if any fails. If RAW fails, EDL will do the work.

Andrologic said:
Yes if Xrom check failed that's a problem. Flash again and try using flash raw & wipe data and echo off the script so you can catch if any fails. If RAW fails, EDL will do the work.
Click to expand...
Click to collapse
Tnx For Reply.I used Flash Raw Too.even wiped before and after flash.but What is echO Off.Can u plz Guide me.need some tutorials

elmor0 said:
Unlock bootloader with official ASUS unlocker tool (may need to factory reset 1st if cannot unbrick it)
Click to expand...
Click to collapse
Tnx But That tool Didnt work with a stupid Connection error

Keep retrying several times including restarting the phone - connection error/ failure is not unusual.
Make sure you are connected to internet while running the ASUS bootloader unlock tool.

elmor0 said:
Keep retrying several times including restarting the phone - connection error/ failure is not unusual.
Make sure you are connected to internet while running the ASUS bootloader unlock tool.
Click to expand...
Click to collapse
My phone is in dead Mood Right now.!Cant do that Just EDL and BootLoader Working.Cant Start Phone With any CN or WW Version Of rOms.i Tried Android 10..11 Flash Raw Files.After FlasH Finishes.Phone LoopS on LoGo several Times,Then Logo desappears, Only boots To Bootloader Directly,Even When i select Recovery option,Phone restarts too bootloader AGAIN

So you can access bootloader mode?

elmor0 said:
So you can access bootloader mode?
Click to expand...
Click to collapse
Yes i can.

Heeeeeelp

Can it connect to/ be recognised by the computer whilst in Bootloader mode?

elmor0 said:
Can it connect to/ be recognised by the computer whilst in Bootloader mode?
Click to expand...
Click to collapse
Yeah Phone Connects As Android Device in Device manager i Checked.in EDL mod As Qualcomm 9008.After i Flash Raw Phone Loops On Logo.Android is NoT Starting

Use ADB commands to factory reset the phone.
Then try flashing official ASUS bootloader unlock tool.

elmor0 said:
Use ADB commands to factory reset the phone.
Then try flashing official ASUS bootloader unlock tool.
Click to expand...
Click to collapse
THIS IS NOT MY PROBLEM RIGHT NOW.I CANT START MY PHONE.ITS DEAD. FLASHING WITH RAW IS USELESSS

Andrologic said:
Yes if Xrom check failed that's a problem. Flash again and try using flash raw & wipe data and echo off the script so you can catch if any fails. If RAW fails, EDL will do the work.
Click to expand...
Click to collapse
How can i flash XROM only?