Hi
i have this motorola razr i xt890.
it freezes on me and i tried to reset it by pressing vol- + power button.
But now it just stuck on black screen and only green led comes on the top left.
as shown in pic attached.
Any body can HELP?
mobishack said:
Hi
i have this motorola razr i xt890.
it freezes on me and i tried to reset it by pressing vol- + power button.
But now it just stuck on black screen and only green led comes on the top left.
as shown in pic attached.
Any body can HELP?
Click to expand...
Click to collapse
Hold volume - / volume + / Power-button (all 3 buttons) simultaneously for about 10 sec. Let it reboot.
No luck tried this
Hazou said:
Hold volume - / volume + / Power-button (all 3 buttons) simultaneously for about 10 sec. Let it reboot.
Click to expand...
Click to collapse
Tried this already no luck, if i hold power button for few secs, the green light goes off but still phone don't turn on at all.
mobishack said:
Tried this already no luck, if i hold power button for few secs, the green light goes off but still phone don't turn on at all.
Click to expand...
Click to collapse
What if u try it again. Hold all 4 buttons, while the phone is connected to power for 10sec. After that release the power and volume up button. So u hold volume down all the time. See what happens.
Hello there, sorry for this resurrection but I have the same problem, black screen, green led on, but nothing more, no fastboot, no recovery, no logos, no vibration, nothing.
Is there any solution for this? I've tried power button + volumen down in many ways and nothing seems to work.
Thanks in advance!
aquilesboy said:
Hello there, sorry for this resurrection but I have the same problem, black screen, green led on, but nothing more, no fastboot, no recovery, no logos, no vibration, nothing.
Is there any solution for this? I've tried power button + volumen down in many ways and nothing seems to work.
Thanks in advance!
Click to expand...
Click to collapse
You can only try to flash ifwi and dnx as I did but I also had no success and also Moto themselves couldn't fix the phone.
If your phone is still in warranty it will get replaced, otherwise you can throw it away.
i had this problem when my battery was deeply unloaded. i had to load it with an powersource with 1A and a factory cable. that worked for me...
Help ,, please emergency !!!!
my xt890 lcd screen and digitizer were broken so i changed them and the phone was working fine for a week, i then wanted to update to kitkat through oem update; everytime i tried it would give me error . i then read that since i unlocked bootloader and rooted my phone and installed cwm recovery i couldnt do an oem update and i had to do a factory reset in order to update through oem, so i did just that ; after the phone finished factory reset and booted i proceeded with oem update while the phone was charging, everything was going fine the file was downloading, i went to the bathroom and came back the display was black, but touch screen was working fine...through more searching i read that this could be from the update, and i should do another reset... since i couldnt see anything even recovery menu. i downloaded moborobo so i can see my screen on pc and proceeded to factory reset ... now i cant even see through moborobo and im stuck. Please help.
Related
Hi all,
My phone is EU retail, locked, unrooted. I updated from ICS to JB via manual download of the update and installation via SD card as explained in one of the more popular threads here. Now after the JB update, I want to enter recovery in order to clear the cache.
With ICS, I was perfectly capable to enter the stock recovery. Press power + vol. down for a few seconds, and the (fastboot?) menu appreaed where I could select recovery. Then the dead robot shows up, I pressu vol. up + vol. down and I had the expected options. Now on JB however, this does not work. It does not matter how long i hold power + vol.down, it always boots the system. When I press power + vol. down and keep holding the two buttons, the green LED goes on and off, then the phone vibrates, showes the red M and seemingly starts to boot. Then the screen goes off and it repeats the 3 steps (LED, vibrate, red M) but then goes on to boot up the system...
Is this supposed to happen?
Same here. It looks like there is no Recovery installed at all, so will try to flash one tonight.
Sent from my XT890 using xda app-developers app
I'm new to Motorola so need to ask...what is this stock recovery for? Is it the same as a typical 'custom recovery'? I've never heard of a manufacturer putting on in their ROM...so can I do a normal backup of a ROM or no? Thanks
AW: [Q] how to enter stock recovery in JB
http://forum.xda-developers.com/showthread.php?p=37784402
Sent from my BataKanged XT910
HSD-Pilot said:
http://forum.xda-developers.com/showthread.php?p=37784402
Sent from my BataKanged XT910
Click to expand...
Click to collapse
Thanks, this releasing of the power button while still holding vol. down works reliable to get into fastboot. However, when I select recovery, the screen goes black? Something is not quite right with my phone...
Edit: I seem to get the hang of it. Now I finally get into recovery. When I select it from the fastboot menu, the screen gets black for a couple of seconds and then the dead robot appears. To get the options in recovery, I press both vol up + down at the same time twice. Initially, the layout in recovery is broken up. Just two blue lines at the top and a few characters in green at the left border. Once I press any of the volume buttons, the options finally appear.
Hmm I have not gotten into recovery on JB even once...can't get in.
help please!!
i have de same problem
when i push power button, the green led turns on for a few seconds and then the phone get off... i can not enter into recovery mode either
anyone know how to fix it or fix it already
thanks!! :crying:
The above tip doesn't work for me - either my timing is wrong or I don't understand the instuctions.
Someone else kindly explained it differently and eventually I got it working. That was posted in some other thread and I don't think it was directly related to recovery - I can't even find that post now!
I have found people saying they've got root on the RAZR M on locked bootloader Jelly Bean...but you need to access stock recovery which I can't do now.
SharpnShiny said:
... That was posted in some other thread and I don't think it was directly related to recovery - I can't even find that post now!
Click to expand...
Click to collapse
Do you mean this post?
http://forum.xda-developers.com/showthread.php?p=37784402#post37784402
That's the original post...I don't fully understand it.
I am grateful to that poster for trying help people - so I don't want to be misunderstood! :good:
If I were to describe the boot process to someone, nothing 'vibrates' - so I don't understand that. My phone doesn't vibrate when boot begins, and no 'i' vibrates either. Also, there are two 'i's. There is the i in Intel and in Inside. I'm guessing it's the first i. Believe me, I have tried 10 combinations like 50 times. I know it can be done, but can't do it using that post.
Nope, someone else explained it differently and I got it the first time. It wasn't a recovery thread so it's hard to find now.
Your Razr does not vibrate after boot? This is strange. Ok, let me try to describe the process based on my Razr i. (As simple as possible)
1. The mobile is turned off
2. Press and hold the Vol- button
3. Now press and hold the Power button and observe the green light. It turns on at the same time I press the Power button. The green light is on for approx. 2 seconds than it turns off.
4. Just at the moment when the green light turns off my Razr vibrates twice within 1 second.
5. I need to release the Power button before the 2. vibration and at least 0,5 seconds later the Vol- button. This is the point to get in the fast boot menu.
Without any vibration you should try to release the Power button just at the moment when the green light turns off - followed by releasing the Vol- button 0,5 seconds later.
-AdMiRaL- said:
Your Razr does not vibrate after boot? This is strange. Ok, let me try to describe the process based on my Razr i. (As simple as possible)
1. The mobile is turned off
2. Press and hold the Vol- button
3. Now press and hold the Power button and observe the green light. It turns on at the same time I press the Power button. The green light is on for approx. 2 seconds than it turns off.
4. Just at the moment when the green light turns off my Razr vibrates twice within 1 second.
5. I need to release the Power button before the 2. vibration and at least 0,5 seconds later the Vol- button. This is the point to get in the fast boot menu.
Without any vibration you should try to release the Power button just at the moment when the green light turns off - followed by releasing the Vol- button 0,5 seconds later.
Click to expand...
Click to collapse
CHAMPION!!!! I understand that perfectly and it worked first time!!! :laugh: :victory: :good:
I'm saving that on a file on my desktop. Chaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaampion!!
SharpnShiny said:
CHAMPION!!!! I understand that perfectly and it worked first time!!! :laugh: :victory: :good:
I'm saving that on a file on my desktop. Chaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaampion!!
Click to expand...
Click to collapse
It was my pleasure to help you.
iam havin galaxy s3 mini and it is locked because of too many pattern tries and i dno m google a/c nor youtube. i tried bypassing it but couldnt!! atlast i thought of reset by entering recovery. bt wen i tried(power buttn+menu+vol up) it doesnt enter recovery!! i tried again still no gain. i kept holding fo few seconds it showd samsung logo and thn vibrate and again screen got off again logo...i released buttons, thn phone got ON. but didnt enter recovery mode
any help?? i want to reset my phone because its locked..
Sent from my GT-S5830i using xda app-developers app
sect0r8 said:
iam havin galaxy s3 mini and it is locked because of too many pattern tries and i dno m google a/c nor youtube. i tried bypassing it but couldnt!! atlast i thought of reset by entering recovery. bt wen i tried(power buttn+menu+vol up) it doesnt enter recovery!! i tried again still no gain. i kept holding fo few seconds it showd samsung logo and thn vibrate and again screen got off again logo...i released buttons, thn phone got ON. but didnt enter recovery mode
any help?? i want to reset my phone because its locked..
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Why did you post in Razr i forum? Wouldn'd it be more effective to post in Galaxy S3 mini forum?
http://forum.xda-developers.com/forumdisplay.php?f=1831
I have bought a Second hand Ativ S and it turned out to be dev unit, it worked for the most part(occasional crashes), but recently it broke.
After it boots it gets me to a blue screen and then powers off. I can still access the download mode and the system files via USB. But I want to do a factory reset of some sort or at least be able to use it.
Can someone help me out with this? Is there a possibility to re flash it? or is there a combination of buttons i don't know about?
nexaddo said:
I have bought a Second hand Ativ S and it turned out to be dev unit, it worked for the most part(occasional crashes), but recently it broke.
After it boots it gets me to a blue screen and then powers off. I can still access the download mode and the system files via USB. But I want to do a factory reset of some sort or at least be able to use it.
Can someone help me out with this? Is there a possibility to re flash it? or is there a combination of buttons i don't know about?
Click to expand...
Click to collapse
http://support.microsoft.com/kb/2749480 = Steps how to hard reset a WP8 Device
thanks for the help, probably that is a very useful information, but i tried those and it didn't work Is there any way I could flash the device?!
nexaddo said:
thanks for the help, probably that is a very useful information, but i tried those and it didn't work Is there any way I could flash the device?!
Click to expand...
Click to collapse
have tried to hard reset the phone by this steps?
If you can't access your phone's Settings page:
1.Turn off your phone.
2.Turn on your phone again by pressing the volume down button until you see the exclamation mark
3.Then, reset the phone by pressing the following four buttons in this order: Volume up, Volume down, Power, Volume down.
4.Your phone should now reset and restart itself. (It might take a while for the process to complete.)
And it didn't work for you? If not you have go to a Samsung store, probably they will flash you a normal OS to your phone...
Jackson5 said:
have tried to hard reset the phone by this steps?
If you can't access your phone's Settings page:
1.Turn off your phone.
2.Turn on your phone again by pressing the volume down button until you see the exclamation mark
3.Then, reset the phone by pressing the following four buttons in this order: Volume up, Volume down, Power, Volume down.
4.Your phone should now reset and restart itself. (It might take a while for the process to complete.)
And it didn't work for you? If not you have go to a Samsung store, probably they will flash you a normal OS to your phone...
Click to expand...
Click to collapse
I've tried that...it didn't work. I've also went to Samsung and apparently it made it worse. Initially my problem had a blue screen after booting but after I took it back from service the blue screen has disappeared and now the phone just powers down after the boot. THe guys at Samsung told me that the don't have the device number in their database and that the cannot do anything to it....so i'm hopping that some tool will pop-up and I'll be able to flash the device from home.
Also being an Engineering unit when I power the device based on your description it doesn't show me an exclamation mark it just goes dark and if i hook it up to the pc it shows as mass USB storage, and I can access the files on it. So there is something i'm missing for this device in particular.
Thanks anyway for your support.
Thank you again Jackson5...Really...Thank you, i've almost lost hope...after seeing your post and replying to it I said ....what the heck...lets try that again, and it worked...not with your steps exactly...I put the phone into a charger and it started to power up...Windows logo power down..and again power up and shutting down....Meanwhile I pressed Up on the volume and the exclamation mark appeared. and from there, suffice to say that I have a phone, again. So Thanks again
AW: Ativ S Blue Screen After Boot
I'm glad to hear that your phone is running again...
Sent from my GT-I8750 using Board Express
Same problem, help...
It seems Ive got the same problem with my Ativ S, I've tried everything and nothing is working...
Sorry, but can you tell me what buttons exactly and in what order did you press to get to the exclamation mark screen, please? I am sorry but I really cannot understand your explanation (your post) very well, you said:
"Windows logo power down..and again power up and shutting down....Meanwhile I pressed Up on the volume..."
Do you mean logo + power or logo + power + volume down or something else? I cannot understand the part "again power up and shutting down" either...
Thanks
aginor said:
It seems Ive got the same problem with my Ativ S, I've tried everything and nothing is working...
Sorry, but can you tell me what buttons exactly and in what order did you press to get to the exclamation mark screen, please? I am sorry but I really cannot understand your explanation (your post) very well, you said:
"Windows logo power down..and again power up and shutting down....Meanwhile I pressed Up on the volume..."
Do you mean logo + power or logo + power + volume down or something else? I cannot understand the part "again power up and shutting down" either...
Thanks
Click to expand...
Click to collapse
If the phone powers down due to blue screen or any other problem you might encounter, connecting it to a power source will make your phone restart...so basically what happens is the Phone powers up reaches the error and shuts down, but because is plugged to a power source it will power back up. So while you are plugged with the device keep pressing those buttons... Having a Dev unit apparently it worked with the Vloume Up ...
-Press the Volume Down Key + Power Key to turn on the unit
- Still hold the volume down key, the release Power Key.
- Wait for the startup screen booting with an exclamation mark " ! " then release the volume down key.
- Press the following buttons in the following order: press the volume up (high volume key) ==> press volume key down (low volume key) ==> press the power key ==> press volume down key.
- Wait a moment and look at the screen, a message such as loading new software will start the hard reset process
nexaddo said:
If the phone powers down due to blue screen or any other problem you might encounter, connecting it to a power source will make your phone restart...so basically what happens is the Phone powers up reaches the error and shuts down, but because is plugged to a power source it will power back up. So while you are plugged with the device keep pressing those buttons... Having a Dev unit apparently it worked with the Vloume Up ...
-Press the Volume Down Key + Power Key to turn on the unit
- Still hold the volume down key, the release Power Key.
- Wait for the startup screen booting with an exclamation mark " ! " then release the volume down key.
- Press the following buttons in the following order: press the volume up (high volume key) ==> press volume key down (low volume key) ==> press the power key ==> press volume down key.
- Wait a moment and look at the screen, a message such as loading new software will start the hard reset process
Click to expand...
Click to collapse
Cheers, I'm stuck in here and i can't get further.
My machine is an T899 Engineering version
Hey, a fellow XDA member has managed to soft brick his One. He flashed a bad zip file, and his phone boot loops. He cannot access the boot loader as he has Fast Boot turned on in Settings - Power, however he can't turn this off as he can't turn the phone on. Has anyone got any advice?
MacHackz said:
Hey, a fellow XDA member has managed to soft brick his One. He flashed a bad zip file, and his phone boot loops. He cannot access the boot loader as he has Fast Boot turned on in Settings - Power, however he can't turn this off as he can't turn the phone on. Has anyone got any advice?
Click to expand...
Click to collapse
power + volume down try that
dirtbikerr450 said:
power + volume down try that
Click to expand...
Click to collapse
It doesn't work because Fast Boot is turned on in Settings
im just guessing here but plug it into a computer and then try power + volume down. a couple of times
dirtbikerr450 said:
im just guessing here but plug it into a computer and then try power + volume down. a couple of times
Click to expand...
Click to collapse
No the LEDs just flash forever
put the phone under a bright light.
hold down power, lights will flash and phone will shut down in about 15-20 seconds
then hold volume down and power to get back to bootloader
gunnyman said:
put the phone under a bright light.
hold down power, lights will flash and phone will shut down in about 15-20 seconds
then hold volume down and power to get back to bootloader
Click to expand...
Click to collapse
hello,
actually it's my problem. thanks MacHackz for all the help he already has done for me.
I tried that with a bright light. it worked in this way that phone really turns off, but as soon as I remove the light, it turns on again. I cannot get it into bootloader.
EDIT: I flashed the phone with MAG-light from the start of charging. screen was black, but buttons started to blink. it went into hboot, and from there I went into recovery. I went to a reboot and press power off. I'll recharge it fully, and then I'll try to sideload a new ROM.
EDIT II: I tried to charge it, but it simply wont stay off. as soon as I plug the cable in, it turns on! I manage to enter HBOOT so I went into recovery and there phone is charging. so, I'll recharge it there and upload a RUU.
does anyone has right RUU? I have EU version from UK.
Did you not make a backup before flashing ??, there is a list of roms on Mikes Android Revolution Rom post - have a look at his guide
Heres another list also http://forum.xda-developers.com/showthread.php?t=2194707
gunnyman said:
put the phone under a bright light.
hold down power, lights will flash and phone will shut down in about 15-20 seconds
then hold volume down and power to get back to bootloader
Click to expand...
Click to collapse
many thanks man indeed, you helped me like anyone before !!!!!!!!!!!!!!!!!!!!
wow...i've been sitting in my dark bedroom for the past 90 minutes trying everythign to wake up my damn phone after it crashing and not coming back to life. ADB was still responsive but none of the reboot commands would do anything. FINALLY found this, went in the bathroom, held the phone up to the light with the power button help down and 10 seconds later it's back to life. double you tee eff...
I was checking my whatsapp today and all of a sudden the screen went blank. The power and volume button didnt respond. I then tried a soft reset by holding the power and volume up keys together. I did get upto the motorola logo during power on, then the screen turns off and then turns on again with the moto logo. This happened time and again. I then tried a hard reset using the recovery by pressing the power and volume down. I then pressed factory thinking a factory reset would help, again the screen turned off and i got a blinking led for a few minutes. Now i am a working professional and dont find time to take it to the service centre. Was wondering if any of you could be of help. Thanks.
srprashant2705 said:
I was checking my whatsapp today and all of a sudden the screen went blank. The power and volume button didnt respond. I then tried a soft reset by holding the power and volume up keys together. I did get upto the motorola logo during power on, then the screen turns off and then turns on again with the moto logo. This happened time and again. I then tried a hard reset using the recovery by pressing the power and volume down. I then pressed factory thinking a factory reset would help, again the screen turned off and i got a blinking led for a few minutes. Now i am a working professional and dont find time to take it to the service centre. Was wondering if any of you could be of help. Thanks.
Click to expand...
Click to collapse
Hello there,
MOstly your battery must have drain so just recharge ur battery and try powering it on. If this didnt help please elaborate your problem by telling did u tried doing something such as trying to root or trying to install a custom room.
pritesh.kedar789 said:
Hello there,
MOstly your battery must have drain so just recharge ur battery and try powering it on. If this didnt help please elaborate your problem by telling did u tried doing something such as trying to root or trying to install a custom room.
Click to expand...
Click to collapse
nevermind i gave another shot at factory reset with a calm and composed mind and have managed to get the phone up and running. thanks
Sry if this is an already answered question but i went through 10 threads and no solutions.
Im stuck at the boot logo and when i try power + volume down the capacitive buttons blink but nothing happens. Im new to htc but i have general knowledge on android and recoveries and adb
vdekjakalit said:
Sry if this is an already answered question but i went through 10 threads and no solutions.
Im stuck at the boot logo and when i try power + volume down the capacitive buttons blink but nothing happens. Im new to htc but i have general knowledge on android and recoveries and adb
Click to expand...
Click to collapse
How long are you holding the buttons? The lights will flash for several seconds before booting to the bootloader.
Have you tried doing it with the device powered off?
Sent from my HTC One M9 using Tapatalk
Im holding the buttons for atleast 60 sec.
Its stuck on the boot animation think. I dont know how to turn it off.
vdekjakalit said:
Im holding the buttons for atleast 60 sec.
Its stuck on the boot animation think. I dont know how to turn it off.
Click to expand...
Click to collapse
Hold the Power button till the screen goes black, then release it & quickly press & hold the Power button & Volume Down to get into the bootloader
im holding the power button only for as long as i can and yet nothing. The capacitive buttons blink and nothing, no vibrations black screen. Just the boot image
vdekjakalit said:
im holding the power button only for as long as i can and yet nothing. The capacitive buttons blink and nothing, no vibrations black screen. Just the boot image
Click to expand...
Click to collapse
Well, I have no idea then.... The phone should turn off after holding the Power button for ~10 seconds while the capacitive buttons blink... For how long are trying to turn off the phone? I would suggest you to let it in bootloop over night, so the battery gets drained & then try to go into bootloader in the morning when charging [emoji4]
I'm having the same issue. My volume down button barely works and when it does it's temperamental. I've done the same and had the same issues with the blinking lights. I've let the battery drain out and tried to redo it to no avail. ADB and Fastboot commands don't work either since it doesn't boot up far enough for the adb wait-for-device commands either, so I think mine is fully bricked. I have a Nexus 4 which I'm using but it would be nice to get my M7 working again as a backup/mess around phone