Database Develop

Screen protectors

hi guys, what screen protectors do you use? i just bought the sgp ultra crystal is it any good?

I've always used Brando - but recently i got SafeScreen which is half the price - and i haven't noticed any differences between them. Never tried SGP though. For Xperia Z i'll probably use the one that Sony bundled with the phone - or whichever brand releases one for both front and back of the phone.

I was thinking this too - the Xperia Z, like other Xperias, ships with a pre-fitted screen protector. I'd like one for the back too though, to keep it looking pristine.

parapaul said:
I was thinking this too - the Xperia Z, like other Xperias, ships with a pre-fitted screen protector. I'd like one for the back too though, to keep it looking pristine.
Click to expand...
Click to collapse
It has this pre-fitted protector on both front and back. There's additional screen protector bundled in the box so you can apply it on the screen to keep it double-protected, from shattering and scratches.

R: Screen protectors
So does xz need another display shield? Isn't enough the one it has from sony?
------------------------
Nexus 7 3G - Tapatalk 2

mouse100 said:
So does xz need another display shield? Isn't enough the one it has from sony?
------------------------
Nexus 7 3G - Tapatalk 2
Click to expand...
Click to collapse
The one applied by Sony is supposed to protect your device from shattering if you happen to break the display. It holds pieces of broken glass togethes. But it is a plastic screen protector - so it will get scratched after a while, so you can either apply a second more scratch-resistant one ( recommended by Sony as it gives you both type of protection ) on top of it - or use the phone as is, and just remove the pre-fitted one should it get scratched badly and replace it with a new one.

I didn't know the phone came bundled with a screen protector, i've just ordered myself a cheapo hybrid hardcase from the Bay, comes with a screen protector as well, so i should be well covered in any eventuality.
I still have a pack of Crystalusion Liquid Glass protector that i haven't had the bottle to try out on my One X yet.

R: Screen protectors
It would be very nice if Sony could sell only its original screen shields to replace the scratched one
------------------------
Nexus 7 3G - Tapatalk 2

Are there waterproof screen protectors? Quite apprehensive of getting one and ending up removing it due to washing the Z, etc
Sent from my N7100 using Tapatalk 2

Back protection?
deleted

mouse100 said:
It would be very nice if Sony could sell only its original screen shields to replace the scratched one
------------------------
Nexus 7 3G - Tapatalk 2
Click to expand...
Click to collapse
That might be impossible since they're most likely applied using high temperature - like car's windshield.

iDroid8 said:
Does the XZ come with anything on the back? If not, then does anyone know where I could get a rear protector, not a case or anything as I'll be using the dock, and can't find anything on Amazon.
Thanks in advance
Click to expand...
Click to collapse
see this back protector http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=13&id=3089&page=1

i think i am going with the front and back protector
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Full Body XtremeGuard
looks like it will do what i want it to do

its very good , i have one either

Sunr1se said:
its very good , i have one either
Click to expand...
Click to collapse
do use the xtreme guard
i have ordered it already!
how is the quality?
thanks!

Akiainavas said:
The one applied by Sony is supposed to protect your device from shattering if you happen to break the display. It holds pieces of broken glass togethes. But it is a plastic screen protector - so it will get scratched after a while, so you can either apply a second more scratch-resistant one ( recommended by Sony as it gives you both type of protection ) on top of it - or use the phone as is, and just remove the pre-fitted one should it get scratched badly and replace it with a new one.
Click to expand...
Click to collapse
mouse100 said:
It would be very nice if Sony could sell only its original screen shields to replace the scratched one
------------------------
Nexus 7 3G - Tapatalk 2
Click to expand...
Click to collapse
I read on one of the reviews that the anti-shatter screen protector which is already fitted is near enough impossible to remove, plus if you do manage to get it off then so does the Sony badge :-\
So I won't be removing mine but will probably buy a Zagg HD screen protector, had one on my S3 and it was soo much better than the standard one they do!
Sent from my GT-N7100 using Tapatalk 2

maverick1103 said:
I read on one of the reviews that the anti-shatter screen protector which is already fitted is near enough impossible to remove, plus if you do manage to get it off then so does the Sony badge :-\
Click to expand...
Click to collapse
That was true for CES demo units - they printed Sony logo on the film and not on the glass. In retail units, Sony / Xperia logos are below the glass so removing the film will not take them away.

Akiainavas said:
That was true for CES demo units - they printed Sony logo on the film and not on the glass. In retail units, Sony / Xperia logos are below the glass so removing the film will not take them away.
Click to expand...
Click to collapse
Oh ok, though the Spanish review I read last week had a retail version and in there it stated that, can you provide information on where you got your info from pls?
Sent from my GT-N7100 using Tapatalk 2

I heard that sony applies screen protectors to their phones. Does anyone know if the xperia Z will ship with a pre-applied front and back protector?
If so, what would be the need to put on a third party screen protector?
I pre-ordered from handtech.uk to New York ... well lets hoping it will have the protectors already on by Sony.

Safesearch is a great screen protector. It's not very sensitive nor lessens the sensitivity

[Q] CRYSTAL ARMOR™ for Xperia Z

Hello xdadevelopers,
I'm new to the forums but I have been scrolling through numerous threads about tempered glass for your smartphone, especially for the Xperia Z. I'm looking for a good protection, front and back, whilst keeping a 'nude' phone.
I've seen a couple examples:
Let's start with the 'Glass t. from Spigen'. 'Only offering a glass protector for the front of the device. You do get a back protector but that is not a glass but a ultra crystal film I believe. Also, I read that the Glass t. has a problem with chipping, the Glass tR. is not yet released but is in the works a should fix this problem.
Second I saw 'Bodyguardz' but they do not over a protection for the XZ. After that I saw 'Brando Workshops', who do offer rounded edges for some devices including the XZ but again no back protection.
But then my I caught this 'CRYSTAL ARMOR™ for Xperia Z' , they do offer a 9H hardness glass protector for both the front and the back, I believe 0,25mm thick (each sheet). The price is quite high at 6,300 Yen and yet again I believe this product has no rounded edges so chipping might again be a problem. I saw a video on YouYube that it does fit in the docking station from Sony, however I have never read a review of the 'CRYSTAL ARMOR™ for Xperia Z'.
The problem here is, I do not understand Japanese, I do understand some words but I can't read it. All the reviews are spoken or written in Japanese so I was wondering of any of you have seen, experienced or own this 'CRYSTAL ARMOR™ for Xperia Z' ?
As I mentioned before I do worry about chipping based on the pictures I've seen who seem to show me a glass without rounded edges. But it does seem to have cutouts.
I think I saw this protector earlier on xdadevelpers but I have not read any review.
(I can't post a link because I'm too new, Google should bring you to a website though)
Thank you in advance for any help you can provide!
P.S. Please forgive me if I've made errors in my text, English is not my native language.

Mijnheer said:
Hello xdadevelopers,
I'm new to the forums but I have been scrolling through numerous threads about tempered glass for your smartphone, especially for the Xperia Z. I'm looking for a good protection, front and back, whilst keeping a 'nude' phone.
I've seen a couple examples:
Let's start with the 'Glass t. from Spigen'. 'Only offering a glass protector for the front of the device. You do get a back protector but that is not a glass but a ultra crystal film I believe. Also, I read that the Glass t. has a problem with chipping, the Glass tR. is not yet released but is in the works a should fix this problem.
Second I saw 'Bodyguardz' but they do not over a protection for the XZ. After that I saw 'Brando Workshops', who do offer rounded edges for some devices including the XZ but again no back protection.
But then my I caught this 'CRYSTAL ARMOR™ for Xperia Z' , they do offer a 9H hardness glass protector for both the front and the back, I believe 0,25mm thick (each sheet). The price is quite high at 6,300 Yen and yet again I believe this product has no rounded edges so chipping might again be a problem. I saw a video on YouYube that it does fit in the docking station from Sony, however I have never read a review of the 'CRYSTAL ARMOR™ for Xperia Z'.
The problem here is, I do not understand Japanese, I do understand some words but I can't read it. All the reviews are spoken or written in Japanese so I was wondering of any of you have seen, experienced or own this 'CRYSTAL ARMOR™ for Xperia Z' ?
As I mentioned before I do worry about chipping based on the pictures I've seen who seem to show me a glass without rounded edges. But it does seem to have cutouts.
I think I saw this protector earlier on xdadevelpers but I have not read any review.
(I can't post a link because I'm too new, Google should bring you to a website though)
Thank you in advance for any help you can provide!
P.S. Please forgive me if I've made errors in my text, English is not my native language.
Click to expand...
Click to collapse
get xtremeguardz, cheap and works great.

G1_enthusiast said:
get xtremeguardz, cheap and works great.
Click to expand...
Click to collapse
Thanks for the reply, I might give this one a shot.
For ten dollar I get a front and back protector for the Xperia Z.
If you do have this screen protector, do you mind telling me how it is?
-How is the feel? Rubbery or Glass
-Is it really scratch resistant for normal use
Did some quick research and apparently there are a lot of coupon codes on the web for discounts.
Now I only need to find one for free shipping

Mijnheer said:
Thanks for the reply, I might give this one a shot.
For ten dollar I get a front and back protector for the Xperia Z.
If you do have this screen protector, do you mind telling me how it is?
-How is the feel? Rubbery or Glass
-Is it really scratch resistant for normal use
Did some quick research and apparently there are a lot of coupon codes on the web for discounts.
Now I only need to find one for free shipping
Click to expand...
Click to collapse
xtremeguard? it feel a little rubbery but it works great for 11 bucks i got 3 full body (front and back)

should be moved to Xperia Z Accessories
This looks like a nice alternative to the Brando glass and the sgp glass t. A bit pricey at 6300yen, but you are getting front and back glass.
Also it states at .4mm thickness, so it may get thick with both applied. Has rounded edges tho.
https://apeiros.stores.jp/#!/items/515363e6a95dcbfede000068
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
from http://digital-baka.at.webry.info/201303/article_14.html

cy888 said:
should be moved to Xperia Z Accessories
This looks like a nice alternative to the Brando glass and the sgp glass t. A bit pricey at 6300yen, but you are getting front and back glass.
Also it states at .4mm thickness, so it may get thick with both applied. Has rounded edges tho.
https://apeiros.stores.jp/#!/items/515363e6a95dcbfede000068
from http://digital-baka.at.webry.info/201303/article_14.html
Click to expand...
Click to collapse
:good::good:

indeed looks very interesting and would love to have a glass protection on the back cover.
Unfortunately, everytjing is market as SOLD OUT :https://apeiros.stores.jp/#!/
Anyone knows where to get it in Europe or with the shipping to Europe?

Galaxy S6 Edge Tempered Glass Screen Protector Thread

The dual edge of the Galaxy S6 Edge is a bit a huge challenge for manufacturers, I have been looking one as a preparation as the edge is my pick for the two phones, so far only one manufacturer that I found.
Samsung Galaxy S6 Edge Tempered Glass Screen Protector
I would love to have the Zagg but still waiting for it

I would be keeping my eye out for manufacturers that came out with a Galaxy Note Edge tempered glass solution; but I couldn't find many. I bet those will be the ones to release Galaxy S6 Edge tempered glass solutions first.
I am on the lookout for one too

Nice find bro, but so far it is still in its early days, we have to wait for at least a month to see much more better screen protectors

smartguydaw said:
Nice find bro, but so far it is still in its early days, we have to wait for at least a month to see much more better screen protectors
Click to expand...
Click to collapse
Right! I'm also looking for better screen protectors. Hopefully, I can find one. I've seen one on Amazon, KlearCut screen protectors, not so expensive but will hold on until I've read reviews.

ombadboy said:
I would be keeping my eye out for manufacturers that came out with a Galaxy Note Edge tempered glass solution; but I couldn't find many. I bet those will be the ones to release Galaxy S6 Edge tempered glass solutions first.
I am on the lookout for one too
Click to expand...
Click to collapse
Iloome has been working on a curved one for the Note Edge since November I believe. They provided an update last month stating they're having issues with it adhering.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my iP6+

il buono said:
Iloome has been working on a curved one for the Note Edge since November I believe. They provided an update last month stating they're having issues with it adhering.
Sent from my iP6+
Click to expand...
Click to collapse
where you have found this ?

tharindunw said:
where you have found this ?
Click to expand...
Click to collapse
Iloome's Facebook page and Twitter. Keep in mind these are still prototypes and aren't available for purchase yet.
Sent from my iP6+

Okay thanks

Interesting but I don't think glass screen protectors for curved mobile phones will happen for a long time.

jason-tech-uk said:
Interesting but I don't think glass screen protectors for curved mobile phones will happen for a long time.
Click to expand...
Click to collapse
Unless if the glass just arrives in a form-fitting way for the phone... idk, those companies have a challenge to overcome, for sure.

With gorilla glass 4 you don't need screen protector people.. Believe.. I have 2 year with S5, Z3, Note 4 and I never use this.. My screen is like new... The Screen protector is a simple deal for 3th part... Good luck.. Waiting 4 my S6 edge.. ????
Xperia Z3 D6603.

I just got my screen protectors (front and back) from Germany. Feels funny to actually get the accessories before the actual phone...

Reb0rn said:
I just got my screen protectors (front and back) from Germany. Feels funny to actually get the accessories before the actual phone...
Click to expand...
Click to collapse
I am assuming they are not tempered glass ?

ombadboy said:
I am assuming they are not tempered glass ?
Click to expand...
Click to collapse
No. Just regular screen protectors.

I also used those without any scratch agree to you.

As the owner of a Note Edge who have spent countless hours in the last couple months trying to find a screen protector (of any kind) that fully cover the entire screen, my advice is to be on the cautionary side when looking at the pictures that the suppliers post for their product. I myself have searched on Amazon, Ebay, as well as many screen protector websites, so far I have purchased about 5-6 screen protectors form various different suppliers, and only one was able to cover the entire screen of the Note Edge.
I have not looked at tempered glass for the Note Edge, as there is a long discussion thread in the Note Edge accesories subforum talking about delays in bringing tempered glass to the Note Edge.
I will be getting the S6 Edge as soon as it is released, and of course I will be looking at getting screen protectors, but I will definitely double check and make sure before making the purchase.

If you guys are hoping for a tempered glass for the edge you can forget it. The only ones that you will find are those that dont cover the edge, just the flat part of the screen. This is normal, Tempered glass is not meant to be anything else else than flat. The only way they could achieve a full cover glass protector is if they create a piece of glass thicker than the screen assembly and carve out the silhouette of the edge. This would mean such a propector would cost 4-5 times the price of a regular one.
I think nobody will have other choice than switching back to plastic or rubber protectors

polish_pat said:
If you guys are hoping for a tempered glass for the edge you can forget it. The only ones that you will find are those that dont cover the edge, just the flat part of the screen. This is normal, Tempered glass is not meant to be anything else else than flat. The only way they could achieve a full cover glass protector is if they create a piece of glass thicker than the screen assembly and carve out the silhouette of the edge. This would mean such a propector would cost 4-5 times the price of a regular one.
I think nobody will have other choice than switching back to plastic or rubber protectors
Click to expand...
Click to collapse
As mentioned earlier in the thread, iLoome was experimenting with a curved glass screen protector so it IS actually possible to make these. I think they're just trying to figure out the proper curvature is all for adherence purposes but otherwise these are doable (albeit may be expensive if/when released).

open1your1eyes0 said:
As mentioned earlier in the thread, iLoome was experimenting with a curved glass screen protector so it IS actually possible to make these. I think they're just trying to figure out the proper curvature is all for adherence purposes but otherwise these are doable (albeit may be expensive if/when released).
Click to expand...
Click to collapse
Experimentation has nothing to do with possibility. They've started experimenting in November and look now, a third of a year later and nothing. Like I said, the only way to do such a proptector is to create a piece that it thicker than the screen of the edge and carve out with a diamond tip the onside of the protector to the curvature of the edge.
One of the researcher for a major cell phone accessory company published an explanation of the challenges of tempered glass protectors in response to the great disappointment of the client following the "halo gate" of the Note 4. The only thing i remember his saying was this:
"You cannot bend tempered glass, you cannot shape tempered glass because it's designed to break in to a million little pieced just like the back window of your car which makes it practically impossible to shape to the contours without giving up something, either strength, flexibility or hardness. The only thing that is possible is carving, just like we carve the side of the protector to be more rounded and pleasant to the touch."

Looking for the ideal tempered glass screen protector is quite a challenge. I'd rather settle with a film protector. There are lots of good quality film protectors that definitely looks like glass, without the glare and all that stuff. I have tried quite a few, the latest was IllumiShield screen protector. So far, it is looking good on my current phone, S4. Most likely, I'll be sticking with this film protector until I found a really,really worth glass shield for the S6. Anyhow, we still have a month to go so hopefully something great would come out.

Samsung Galaxy Note 8 Tempered Glass Screen Protectors

Im a fan of totally clear tempered glass screen protectors, but all too often they have colouring on them.
One seller I've seen on ebay who is doing a completely clear one:
http://www.ebay.co.uk/itm/162634872550
One with coloured parts on Amazon UK:
https://www.amazon.co.uk/Galaxy-Note-Vigeer-Bubble-Free-Installation/dp/B074C4KX3G
Another on Amazon UK with coloured parts, different design:
https://www.amazon.co.uk/Protector-Alinsea-Shatterproof-protector-Installation/dp/B0744D5ZN8/

Surely whitestone is going to be the one to get again?

Oli2k said:
Surely whitestone is going to be the one to get again?
Click to expand...
Click to collapse
I contacted Whitestone. They said the domed glass should be released early September so we could have them before the release date (If the release date is actually Sept 15th).
I really like it on my S8+. A little thick, but no lack of responsiveness. Only other complaint is that dusk collects along the edge of it.

I will be waiting a bit before ordering one

Going with this one for now: https://www.amazon.com/Protector-Co...83391&sr=8-3&keywords=note+8+screen+protector
I have had pretty good luck with this company for a while.

I'd try out the tempered glass protectors but not for retail price. Hopefully they do better than what is available for the S8+.

Augman said:
Going with this one for now: https://www.amazon.com/Protector-Co...83391&sr=8-3&keywords=note+8+screen+protector
I have had pretty good luck with this company for a while.
Click to expand...
Click to collapse
been looking at this one too. I typically do not use screen protectors but will on the Note 8. Can you tell me how well these work with cases?
Thanks

gpvlog said:
been looking at this one too. I typically do not use screen protectors but will on the Note 8. Can you tell me how well these work with cases?
Thanks
Click to expand...
Click to collapse
I havent been able to find a glass screen protector that would work with a case. The other problem is that these screen protectors only stick to the edges of the phone.... If there was a flat screen option I would have bought that..............

Yes, I'm worried about using a tempered glass screen and a case.

BradPitt123 said:
Already ordered this from ebay.in
http://www.ebay.in/itm/272820131684?aff_source=Sok-Goog
Did anyone use this SP? share your review here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Doesn't look case-friendly

I used one from Armoursuit on my note 7 and liked it enough to put it on my s7e. Unfortunately they won't have any until the 15th. I order one similar and a tempered glass. Figure I'll try them both. Supposedly case friendly
Sent from my SAMSUNG-SM-G935A using Tapatalk

Circlel05 said:
I used one from Armoursuit on my note 7 and liked it enough to put it on my s7e. Unfortunately they won't have any until the 15th. I order one similar and a tempered glass. Figure I'll try them both. Supposedly case friendly
Sent from my SAMSUNG-SM-G935A using Tapatalk
Click to expand...
Click to collapse
How are Armoursuit's screen protectors? Are they stylus-friendly?

fgr said:
I contacted Whitestone. They said the domed glass should be released early September so we could have them before the release date (If the release date is actually Sept 15th).
I really like it on my S8+. A little thick, but no lack of responsiveness. Only other complaint is that dusk collects along the edge of it.
Click to expand...
Click to collapse
its already listed on their website http://www.mobilefun.pl/64792-whitestone-dome-glass-galaxy-note-8-full-cover-screen-protector.htm and should be available soon

masi0 said:
its already listed on their website http://www.mobilefun.pl/64792-whitestone-dome-glass-galaxy-note-8-full-cover-screen-protector.htm and should be available soon
Click to expand...
Click to collapse
I saw that, they say due in stock in 3 to 5 days. I guess they ship from the UK though, because they said shipping to the US takes 10 to 14 days.
I'm hoping Amazon will get them in at the same time Mobile Fun does. Then I should have it in two days

Does anybody have a recommendation for a relatively inexpensive, but potentially "good" case-friendly glass screen protector?
Obviously, with nobody yet having the devices themselves, it's going to be difficult to assess whether fit, etc, is good, but if anybody has experience of a brand/manufacturer that has done good things on other devices with non-flat screens, then that could be useful to know - I don't plan to use my Note 8 without some protection, and I've always found plastic protectors to be poor with regard to feel and their oleophobic properties, and often attract dust.
I'm thinking I'll get something that will more than likely be cheap, but reasonably performing, until such time as there are reviews of different protector models with experience of being used on the Note 8 before committing myself to a bigger purchase, such as a Zagg or a Whitestone.

I think the only logical screen protector will be those ones that are similar to paint protection film applied on cars. I put one on my wifes S8, didnt look too bad, Used a bit of heat from the hairdryer.

Limeybastard said:
I think the only logical screen protector will be those ones that are similar to paint protection film applied on cars. I put one on my wifes S8, didnt look too bad, Used a bit of heat from the hairdryer.
Click to expand...
Click to collapse
Plastic protectors seem to fall into two categories; stretchy "military grade" stuff which can be a bit "orange peely" and grippy to the touch, and a film which seems to offer less protection, but suffer from finger prints.
Best plastic I've seen is the iCarez on the Note 4, which gave good protection and feel, but was a bit of a dust magnet.

I'll be getting a Skinomi Tech Glass tempered screen protector when they're available. Had them on the Note 2 and Note 5 and on the Tab S 8.4. Haven't disappointed me yet.

Tempered glasses don't fit right on curved edges and you have to touch screen harder for it to respond
Sent from my SAMSUNG-SM-G935A using XDA-Developers Legacy app

Anyone tested this maker's protectors before?
Base Tempered Glass Screen Protector for Galaxy Note 8
https://www.youtube.com/watch?v=BeIEnYJRkZQ

Screen protectors

Righteo, our phones will be arriving in a week, which screen protectors should we be buying? Thoughts?
I'm tempted by a tempered glass (pun not intended, but I chuckled), but haven't had one before. They seem like they can be pretty thin these days and keep the nice feeling of glass instead of plastic. My Z3C came with protectors for front and back in the box, but looking at the "whats included" things, I can't see any mention of that for the XZ1c.
I guess the requirements are: can't be crap; gotta be reasonably easy to apply bubble free; nice to touch; not going to peel or flake after a few months; not a finger-print magnet; doesn't interfere with the touchscreen function; doesn't alter the colours.
Get your suggestions in! Mobilefun have a couple available to preorder, but I've got no reason to think these are any better than ones on Amazon etc.

Just got my XZ1 Compact from Sony HK. They gave me a third party "nano protector" which is crap; covers the screen but not the wall glass area, the texture is nice but it's a dust magnet. Looking for a full screen tempered glass protector now..
Sent from my G8441 using Tapatalk

Definitely go tempered glass, just dropped my nexus 5x today (a week before upgrade to XZ1 compact) and the screen protector cracked but the screen is fine. I also know a guy at work who has dropped his iphone at least 6 times and broken the screen protector only.
Im tempted to get the sony Xperia™ XZ1 Compact Style Cover Stand SCSG60 for a bit more protection but not sure how ill get on with a cover case like that.
Screen protector wise i've only seen these in the UK
Not sure whats curved about it but its official ish by the looks of it. Not sure i like the black boxes though.
http://www.mobilefun.co.uk/roxfit-mfx-sony-xperia-xz1-compact-curved-glass-screen-protector-64844
Not heard of Olixar but this one has clear glass all over.
http://www.mobilefun.co.uk/olixar-s...t-tempered-glass-screen-protector-black-65018

I found a cheap tempered glass protector, the only one I could find after couple of hours checking shops in Hong Kong.
It went to the trash bin after a day...
It covered the screen area only and its edges wouldn't stick to the phone glass...
Yes, I just found out that the XZ1 glass is 2.5D so it is slightly curved, very very slightly but still.
I guess it will be hard to find a full screen one then. The best option I've found on Internet is a curved plastic protector, similar to what I had on my S7 edge; it should cover nicely the whole area without bubbles or the issues all the curved tempered glass had, but this kind of material is fingerprint, smudges and grease magnet...
Sent from my G8441 using Tapatalk

koziakauzu said:
Just got my XZ1 Compact from Sony HK. They gave me a third party "nano protector" which is crap; covers the screen but not the wall glass area, the texture is nice but it's a dust magnet. Looking for a full screen tempered glass protector now..
Click to expand...
Click to collapse
Try this one - Sony Xperia XZ1 Compact Screen Protector,SMTR® [Edge Full Coverage Screen Protector][Easy-Install][Scratch resistant][Ultra Clear] 2.5D Pro Fit 9H Tempered Glass 0.33mm for Sony Xperia XZ1 Compact - Black https://www.amazon.co.uk/dp/B075686NYQ/ref=cm_sw_r_cp_apa_TQGYzb8Q5M2SG

Oblox said:
http://www.mobilefun.co.uk/roxfit-mfx-sony-xperia-xz1-compact-curved-glass-screen-protector-64844
Click to expand...
Click to collapse
Purchased the full glass screen protector mentioned here as well as the Roxfit book case. Will let you guys know how it goes when I receive them.

Looks like the tempered glass ones don't reach to the edges due to curving of the screen. Might be a bit tricky to find one that covers the entire front properly, and even then, I guess glass is out of the question.
Gonna try one of these: https://www.amazon.co.uk/dp/B0755DYRYQ

Dashers said:
Looks like the tempered glass ones don't reach to the edges due to curving of the screen. Might be a bit tricky to find one that covers the entire front properly, and even then, I guess glass is out of the question.
Gonna try one of these: https://www.amazon.co.uk/dp/B0755DYRYQ
Click to expand...
Click to collapse
This is the Roxfit one, they do the cases under the 'made for xperia' partnership so id hope the glass would be good too (even if not made for xperia)
https://www.roxfit.mobi/products/sony-xperia-xz1-compact-full-cover-tempered-glass

Roxfit one looks the same, I think these ones with the coloured surrounds might be edge-to-edge. If you look at the clear options on Amazon a number of them mention they'll only cover the screen and not go to the edge due to curves. There are a couple of reviews on the XZ1 protectors that mention they don't go to the edge.
Should get mine tomorrow and just received notification of dispatch of my phone too, so hopefully they'll all rock up some time tomorrow.

I bought this screen protector and I'm a little disapointed. Although it was easy to put on and has a good finish. It doesn't wrap round the edges of the curved display and thb, I can't imagine there are any protectors that will.
Part of a screen protectors design is to be hard and ridgid to resist scratches, now get that hard material to wrap round a 90 degree corner.
I'll be interested in feedback of the other protectors listed here.

Dashers said:
Gonna try one of these: https://www.amazon.co.uk/dp/B0755DYRYQ
Click to expand...
Click to collapse
Easy to put on, I did it straight away, so I pulled off the shipping cover and slapped this one down in one movement. No dust, no bubbles.
The black frame is a little weird, the most noticeable bit is the cut out for the Sony logo. But be warned with these glass frames - you cannot use the official DK60 dock! It is just slightly too big to slot in to the correct sized bracket. I've had to use a bigger bracket and shove a bit of card down the back.

Anyone have a suggestion of a normal nonglass screen protector? I just love the one that originally came with my z3c - it's oleophobic so I honestly never see any fingerprint smudges on the screen.

Dashers said:
Easy to put on, I did it straight away, so I pulled off the shipping cover and slapped this one down in one movement. No dust, no bubbles.
The black frame is a little weird, the most noticeable bit is the cut out for the Sony logo. But be warned with these glass frames - you cannot use the official DK60 dock! It is just slightly too big to slot in to the correct sized bracket. I've had to use a bigger bracket and shove a bit of card down the back.
Click to expand...
Click to collapse
So is it ok in use with the phone? Id rather have full coverage but ive seen some not full coverage ones that are completely clear and so wont look as odd with the black sections.

Alas, the only camera I have on me at the moment is my phone. But it doesn't look too bad, I can't see a clear one looking any better in reality as the thickness is the most distracting thing. A film one will get a snugger fit, but the clarity and feel isn't anywhere as nice as glass.

This one from Protectionfilms24.com is more up my street, old school film with cutouts only where they need to be but need to get more info on just how much "smaller than the display" it actually is.

(all screen protectors listed in this thread don't ship to my country and I'm not a big fan of colored frame either)
Last try until I give up and just use my phone without a screen protector.
Installed an " Imak Hydrogel " protector (installation requires water)... Good thing is it came with 2 pieces.
I have lot of experience with regular plastic ones and tempered glass but this is my first protector requiring water..
I've installed the first one and I had an horrible texture, when I decided to remove it I also tried to reposition it just to see if it could be better. Indeed it was but it was also already ruined by my fingerprints underneath. (it doesn't adhere to transparent tape, hard to find a way to peel it off or just reposition it)
I've then installed the spare one and is definitely better this time. Not perfect but definitely usable. I have to see how scratch prone it is and if it doesn't retain oil or fingerprints too much.
Oh yes and it is covering the whole glass edge to edge..
Sent from my G8441 using Tapatalk

I went with the Omaton (https://www.amazon.co.uk/dp/B0755DYRYQ) as previously listed. Really not a fan of the black frame bits i just dont see the need and it stops one product being used by all coloured models which seems a bit unsound in a business sense too.
Still the application and packaging and all the stickers screen wipes and so on made the process really easy and i got a dust and bubble free application and pleased with the end result and i can live with the oddly boxed Sony logo.

Omaton with the black frame fitted:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can see it goes past the edge of the screen, but doesn't quite meet the edge of the phone (due to curving). So unless somebody makes a shaped front piece, I think this probably going to be as good as it gets for glass.

duplicate

Dashers said:
Omaton with the black frame fitted:
-snip-
You can see it goes past the edge of the screen, but doesn't quite meet the edge of the phone (due to curving). So unless somebody makes a shaped front piece, I think this probably going to be as good as it gets for glass.
Click to expand...
Click to collapse
That looks pretty damn good.