Database Develop

[Q] Restoring Rogers HTC One M7 to Factory without RUU ?

Hello everyone,
This is my first post so I hope I don't end up being a "typical noob".
I'll try give the full info but keep it concise.
Background:
1) Carrier Unlocked HTC One M7 Originally on Rogers.
M7_UL PVT SHIP S-On RH
HBoot-1.44.000
Radio - 4A.14.3250.13
Open DSP 26.120.274.0202
emmc-boot
2) The phone was working perfectly after being hard reset, and configured without a sim.
3) After it was activated by the telco, the keyboard would would no longer work. Dialpad fine... menus fine... but no keyboard would pop up when selecting text fields. Did a full factory reset, and also tried clearing the Sense Touch data cache via Settings->App.
4) After trying various possible solutions I found online, I finally decided to try start from scratch by installing stock firmware.
WARNING: i'm the second owner of the phone. For warranty I would have had to send the phone to HTC. I suspect the HTC warranty won't apply to me anyhow. I suggest that in this situation, people just get the phone fixed on warranty if they have that option
First Steps:
A1) I unlocked the bootloader via HTCDev and used adb to flash CWM Touch Recovery.
A2) Restored the "M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus)"
A3) Phone now works correctly at this stage, but is still bootloader unlocked/tampered + CWM Touch Recovery
A4) While I may eventually flash the phone to an official Developer Edition
I would like to reinstall a factory recovery.img, then use revone to get rid of the bootloader "tampered" flag and relock it. (for OTA Updates, and the usual warranty concerns)
A5) I tried flashing both the boot.img and recovery.img from "OTA_M7_UL_JB_50_Rogers_WWE_1.29.631.17_R-1.29.631.4_release_318662" to get back to stock recovery, but I got a Red triangle.
Questions:
Q1): Does anyone know of a stock recovery.img I can use with Rogers firmware ? (SEE UPDATE BELOW)
Q2): Is there some trick to getting the OTA recovery/boot images I tried....working ? Is there some cache reset of somthing that needs to be done after flashing the stock recovery/boot imgs ? (SEE UPDATE BELOW)
Thanks in advance !

same issue
I too am looking for a rogers ruu or even the M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus) since bugsys page is down.
bump
LRail said:
Hello everyone,
This is my first post so I hope I don't end up being a "typical noob".
I'll try give the full info but keep it concise.
Background:
1) Carrier Unlocked HTC One M7 Originally on Rogers.
M7_UL PVT SHIP S-On RH
HBoot-1.44.000
Radio - 4A.14.3250.13
Open DSP 26.120.274.0202
emmc-boot
2) The phone was working perfectly after being hard reset, and configured without a sim.
3) After it was activated by the telco, the keyboard would would no longer work. Dialpad fine... menus fine... but no keyboard would pop up when selecting text fields. Did a full factory reset, and also tried clearing the Sense Touch data cache via Settings->App.
4) After trying various possible solutions I found online, I finally decided to try start from scratch by installing stock firmware.
So far:
A1) I unlocked the bootloader via HTCDev and used adb to flash CWM Touch Recovery.
A2) Restored the "M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus)"
A3) Phone now works correctly at this stage, but is still bootloader unlocked/tampered + CWM Touch Recovery
A4) While I may eventually flash the phone to an official Developer Edition
I would like to reinstall a factory recovery.img, then use revone to get rid of the bootloader "tampered" flag and relock it. (for OTA Updates, and the usual warranty concerns)
A5) I tried flashing both the boot.img and recovery.img from "OTA_M7_UL_JB_50_Rogers_WWE_1.29.631.17_R-1.29.631.4_release_318662" to get back to stock recovery, but I got a Red triangle.
Questions:
Q1): Does anyone know of a stock recovery.img I can use with Rogers firmware ?
Q2): Is there some trick to getting the OTA recovery/boot images I tried....working ? Is there some cache reset of somthing that needs to be done after flashing the stock recovery/boot imgs ?
Q3) If I eventually decide to install the Developer Edition firmware.. will the phone be effectively be a Dev phone ? (OTA updates... factory recovery/locked bootloader... no ID issues in the future..)
Thanks in advance !
P.S. For pure curiousity.... Am I correct in believing that revone can't clear the "tamper" flag and lock the bootloader with the custom recovery ?
Click to expand...
Click to collapse

double post

omgkush said:
I too am looking for a rogers ruu or even the M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus) since bugsys page is down.
bump
Click to expand...
Click to collapse
A lot of the RUUs and nandroid files were apparently "saved" to "Crushalot's" site: htc1guru.com
you can also get the file links in this thread: http://forum.xda-developers.com/showthread.php?t=2428276
I used that nandroid backup. I don't think a Rogers RUU exists (yet).
UPDATE ON MY PROGRESS:
1) I had success with using revone to get my M7 S-Off and removed the tampered flag in the bootloader.
I suspected that SuperSU wasn't working right becaue i hadn't been getting a root permission popup window on the phone.
On I reinstalled SuperSU, I got the root rights popup window when running revone, and it then worked.
2) I have realized that the firmware.zip, which is contained in the OTA update, contains the factory recovery and boot image I needed.
(I kept thinking that it was an incremental update and not a complete image or something, due to it's size.)
Therefore, instead of flashing the images individually, I used the firmware.zip from the OTA update to do a complete firmware update.
3) The Red triangle I was getting was, normal. I couldn't find clear info, so I assumed it was a bad sign because the only time i had seen the factory recovery was when it was upating with a red circle/arrow. So.. I thought the red circle/arrow was the icon you wanted to see.
Eventually I found a thread for a different HTC Phone, that also works for the M7
Result: You can use the volume up + power buttons to enter the recovery once the red triangle appears.
4) After installing the firmware (extracted from the OTA update), I used revone to set the phone back to S-ON, then locked it.
5) The OTA update then automatically installed, as a stock phone would.
6) After the OTA update, for some reason the tampered flag is back. I'll be using revone today to fix that.
UPDATE 2
:
6) After the OTA update, for some reason the tampered flag was back. I unlocked the phone, used revone to to get S-OFF, then used revone to reset the tamper flag and relock the bootloader, and then "fastboot oem writesecureflag 3" to set S-ON.
After 2 reboots the Tampered flag was back !
I'm suspecting that for the tampered flag to stay off I need to keep it S-OFF, which defeats the whole idea of trying to return it to stock.
Any ideas ?
Anyone working for Rogers want to leak an RUU ? hehe

Did you use CWM to flash the firmware.zip in step 2? I'm trying to follow your steps to get back to stock to obtain my stock rogers update but i'm getting lost as to what you're using to flash, recovery or fastboot.

LRail said:
A lot of the RUUs and nandroid files were apparently "saved" to "Crushalot's" site: htc1guru.com
you can also get the file links in this thread: http://forum.xda-developers.com/showthread.php?t=2428276
I used that nandroid backup. I don't think a Rogers RUU exists (yet).
UPDATE ON MY PROGRESS:
1) I had success with using revone to get my M7 S-Off and removed the tampered flag in the bootloader.
I suspected that SuperSU wasn't working right becaue i hadn't been getting a root permission popup window on the phone.
On I reinstalled SuperSU, I got the root rights popup window when running revone, and it then worked.
2) I have realized that the firmware.zip, which is contained in the OTA update, contains the factory recovery and boot image I needed.
(I kept thinking that it was an incremental update and not a complete image or something, due to it's size.)
Therefore, instead of flashing the images individually, I used the firmware.zip from the OTA update to do a complete firmware update.
3) The Red triangle I was getting was, normal. I couldn't find clear info, so I assumed it was a bad sign because the only time i had seen the factory recovery was when it was upating with a red circle/arrow. So.. I thought the red circle/arrow was the icon you wanted to see.
Eventually I found a thread for a different HTC Phone, that also works for the M7
Result: You can use the volume up + power buttons to enter the recovery once the red triangle appears.
4) After installing the firmware (extracted from the OTA update), I used revone to set the phone back to S-ON, then locked it.
5) The OTA update then automatically installed, as a stock phone would.
6) After the OTA update, for some reason the tampered flag is back. I'll be using revone today to fix that.
UPDATE 2
:
6) After the OTA update, for some reason the tampered flag was back. I unlocked the phone, used revone to to get S-OFF, then used revone to reset the tamper flag and relock the bootloader, and then "fastboot oem writesecureflag 3" to set S-ON.
After 2 reboots the Tampered flag was back !
I'm suspecting that for the tampered flag to stay off I need to keep it S-OFF, which defeats the whole idea of trying to return it to stock.
Any ideas ?
Anyone working for Rogers want to leak an RUU ? hehe
Click to expand...
Click to collapse
Tampered will come back the second you flash a recovery. Best to stay S-OFF

I've been in a similar situation where I had to send my phone in for repair and couldn't get the tamper flag to stay off.
I found out it was because I was trying to remove the flag and lock the bootloader and S-On on 1.29.631.17
What I had to do was restore using CWM back to 631.4 then flash stock recovery then remove flag, lock bootloader, then S-On.
The tamper flag should stay off you can try rebooting a couple of times then boot into bootloader to check.
Then I ran the OTA updates and i'm on 631.17 at the moment and my tamper flag is still off.
Hope this helps.
PS. I believe the latest JB4.3 OTA update upgrades the hboot to 1.55 so revone would not work on it. Not planning to try it myself but if anyone can verify this would be great

ysl00 said:
I've been in a similar situation where I had to send my phone in for repair and couldn't get the tamper flag to stay off.
I found out it was because I was trying to remove the flag and lock the bootloader and S-On on 1.29.631.17
What I had to do was restore using CWM back to 631.4 then flash stock recovery then remove flag, lock bootloader, then S-On.
The tamper flag should stay off you can try rebooting a couple of times then boot into bootloader to check.
Then I ran the OTA updates and i'm on 631.17 at the moment and my tamper flag is still off.
Hope this helps.
PS. I believe the latest JB4.3 OTA update upgrades the hboot to 1.55 so revone would not work on it. Not planning to try it myself but if anyone can verify this would be great
Click to expand...
Click to collapse
Thanks for the heads up. If I get a bunch of free time I may just test that after doing a new full backup.
Not sure about the Rogers 4.3 OTA.
I'm running currently the phone with Developer Edition ROM+CID and can confirm that it's 4.3 OTA updates hboot to 1.55.
After the update my phone is still s-off.
I have previously rolled back to an older hboot via a firmware flash.
Since the phone is still S-OFF, I assume I can do that again if needed.

EddyOS said:
Tampered will come back the second you flash a recovery. Best to stay S-OFF
Click to expand...
Click to collapse
Thanks For the reply Eddy.
Recovery flashing sets the tampered flag even if it's a factory recovery from an OTA being flashed ?
I agree on the S-OFF normally.
This was a test to see if I could get it back to full stock for warranty if needed, and S-OFF would not be acceptable in that case.

please help!
PLEASE! I have been trying to get Rogers stock Canada back on my HTC since the day after release lol..
I have this nandroid backup but can't figure out how to flash it... I also can't relock to try and flash a legit version
So pleaseeee how do I install this!!! I am using cwm I tried making a folder called backups in clockworkmod dir but it doesn't pickup the nandroid backup... Help plz!!!!

So what do I do with the M7 CWM Nandroid Backup CID ROGER001 1.29.631.17 2013-06-03.zip
I can't flash it and it won't recognise it as a backup, how do I even install it?
Nobody has mentioned how to use this zip, it isn't a tar file or flashable so what do I do with it?

millarrjm said:
PLEASE! I have been trying to get Rogers stock Canada back on my HTC since the day after release lol..
I have this nandroid backup but can't figure out how to flash it... I also can't relock to try and flash a legit version
So pleaseeee how do I install this!!! I am using cwm I tried making a folder called backups in clockworkmod dir but it doesn't pickup the nandroid backup... Help plz!!!!
Click to expand...
Click to collapse
Esposition said:
So what do I do with the M7 CWM Nandroid Backup CID ROGER001 1.29.631.17 2013-06-03.zip
I can't flash it and it won't recognise it as a backup, how do I even install it?
Nobody has mentioned how to use this zip, it isn't a tar file or flashable so what do I do with it?
Click to expand...
Click to collapse
Simply doing a web search for info would have given you the answers on many many webpages and some youtube videos.
http://bit.ly/1a6d88A
http://bit.ly/1a6ewZ5
Quick answer:
1) Nandroid backups are created and used by the custom recovery "clockworkmod"
2)You need to install a CWM custom recovery (i like the touch version), then unzip the nandroid backup file to the /clockworkmod/backup/ folder. It will create a new folder there. I used the program "Android File Transfer" to copy the files from my laptop to the phone.
3) Once the backup file is on your phone, to restore the backup, you simply boot into recovery and restore the backup as explained in those web pages or youtube videos.
If you have specific things you have tried.... folder names... etc. then ask a question in detail.
You will then have a much higher chance of getting a correct answer (or even an answer at all)
Hope that helps a bit...
Cheers
PS:
millarrjm
FWIW: Simply asking general questions with "pleaseee" and a bunch of exclamation points is a quick way to be ignored (especially in this forum meant for people with some technical skill) See this video (which you should have seen on signup to the forum) for info: http://www.youtube.com/watch?v=JmvCpR45LKA

re.
LRail said:
Simply doing a web search for info would have given you the answers on many many webpages and some youtube videos.
http://bit.ly/1a6d88A
http://bit.ly/1a6ewZ5
Quick answer:
1) Nandroid backups are created and used by the custom recovery "clockworkmod"
2)You need to install a CWM custom recovery (i like the touch version), then unzip the nandroid backup file to the /clockworkmod/backup/ folder. It will create a new folder there. I used the program "Android File Transfer" to copy the files from my laptop to the phone.
3) Once the backup file is on your phone, to restore the backup, you simply boot into recovery and restore the backup as explained in those web pages or youtube videos.
If you have specific things you have tried.... folder names... etc. then ask a question in detail.
You will then have a much higher chance of getting a correct answer (or even an answer at all)
Hope that helps a bit...
Cheers
PS:
millarrjm
FWIW: Simply asking general questions with "pleaseee" and a bunch of exclamation points is a quick way to be ignored (especially in this forum meant for people with some technical skill) See this video (which you should have seen on signup to the forum) for info: http://www.youtube.com/watch?v=JmvCpR45LKA
Click to expand...
Click to collapse
I tried that. CWM version 6.+ doesn't save to the backup folder anymore. And won't read a restore I put in it either... Ie. The rogers off the bugzylawson site.

bklam said:
Did you use CWM to flash the firmware.zip in step 2? I'm trying to follow your steps to get back to stock to obtain my stock rogers update but i'm getting lost as to what you're using to flash, recovery or fastboot.
Click to expand...
Click to collapse
Hello bklam,
Sorry, I missed your question.
No. I used CWM only to restore the "Whampahoofus"' nandroid backup.
That backup is "almost" 100% stock. Unfortunately it contains a custom recovery and won't (in my experience) work for normal OTA updates.
To solve this I decided to extract the factory firmware from one of the old Rogers OTA ("unrar" will extact the files from the OTA), and flash that.
To flash it I used the quick instructions in the 1st post of this thread-->http://forum.xda-developers.com/showthread.php?t=2182823
(I believe there were more details instructions on firmware.zip flashing in another thread but I can't find it at the moment)
Note to other readers: There can be confusion about the word "firmware". Some people use it describe the Rom.
In this case, I'm referring to the hboot, boot and recovery images in a single special file called firmware.zip. I believe in some cases it can also include the radio software too.
If I ever get a chance to get this 100% tested and figured out, I'll post a step by step method.
At this point it's just a overview of what I tried, and looking for other members advice.
Unfortunately, as you can see from my posts, it didn't work 100% for me. It gave me the stock Rogers HTC One Rom/software with OTA updates, but the bootloader still had the tampered flag.
Check out ysl00's post above. He/She evidently had it working 100% without the tamper flag.
Not sure if Rogers has a 4.3 OTA yet, but that might fix the flag since it includes a firmware update along with the OS update.
Post back with your results !

Did you see my above reply lrail? .. just saw u post after thought you might have missed ot!! Thanks so much fpr the help and replies. You are the man!

figured it out.
I thoight the explorer I was using showed all files on phone. TO FIX this issue download root explorer and you can see the other directories... Goto data>media>clockworkmod>backups .. it isnt in the sd dir on your phone.

millarrjm said:
Did you see my above reply lrail? .. just saw u post after thought you might have missed ot!! Thanks so much fpr the help and replies. You are the man!
Click to expand...
Click to collapse
Sorry about that. No I didn't see it until just now. I guess thats the problem with having 20 browser tabs open at once. hehe
millarrjm said:
I thoight the explorer I was using showed all files on phone. TO FIX this issue download root explorer and you can see the other directories... Goto data>media>clockworkmod>backups .. it isnt in the sd dir on your phone.
Click to expand...
Click to collapse
Good to hear. I read your post. I thought..."Is he using a root file manager ?" then read your next post….
I was also going to suggest a guaranteed way to determine where the CWM backups are being stored on a phone.
This way it doesn't matter which version of CWM, which phone or if the back directory exists yet.
Simply create a test backup and see where it goes. Then copy the Nandroid backup that you want to restore, there.

I should mention that I'm currently running my phone as a Developer Edition (Brightstar) 4.3 with OTAs, S-OFF, and unlocked.
It's works perfectly. Only the Carrier ID (CID) needed to be changed. The MID is the same.
I assume that a brightstar RUU will work on it now, even if the phone was locked and S-ON.
I have a few more things I want to tweak on it, then I'll likely make a backup and try restore it to stock rogers again so that I can create a clear how-to.
What's interesting, is that the Developer Edition OS seems to be the same as the Rogers Edition OS (without the rogers apps which can be uninstalled).
The only reason I think it might be a better choice is that the Dev Edition should get OTA updates earlier than the Rogers Edition.
I tried the custom Viper Rom 2.6.x but couldn't get an LTE connection. I suspect that was due to APN settings, but I didn't confirm that.
Anyone got the Viper Rom fully working on a Roger HTC M7 ?

Alright so I've successfully re-installed that nandroid backup and enabled s-off, re-locked, and removed the tampered notification.
When I try to do the OTA update it just hangs at the bug fix1. It default opens and tries to install it through cwm recovery, I've never done any OTA updates before so I assume this is normal?
How can I fix it hanging at bug fix1?

Esposition said:
Alright so I've successfully re-installed that nandroid backup and enabled s-off, re-locked, and removed the tampered notification.
When I try to do the OTA update it just hangs at the bug fix1. It default opens and tries to install it through cwm recovery, I've never done any OTA updates before so I assume this is normal?
How can I fix it hanging at bug fix1?
Click to expand...
Click to collapse
The OTAs don't work with custom recovery. You need the factory recovery

Process com.htc.dialer isn't responding

Hi i was update software by wifi to 4.4.2 and after reboot is start display message "process com.htc.dialer isn't repsonding wait or close"
and phone was rebooting every 30-60 seconds. I was make s-off, unlock bootloader, custom recovery twrp etc. install custom rom HD revolution but is same problem is unknow imei now and no signal
Anybody know how to fix it ?
EDIT 1
I was see the baseband also is unknown but i donwland radio flash from recovery reboot and still same
The radio which i use match with the version from fastboot, any chance to solve this issue ??
Regards

Anybody know how to fix the phone ?? i was try different roms etc. but nothing
still baseband, imei unknow but from fastboot is show normal imei and baseband
Regards

blackangel82 said:
Anybody know how to fix the phone ?? i was try different roms etc. but nothing
still baseband, imei unknow but from fastboot is show normal imei and baseband
Regards
Click to expand...
Click to collapse
Yes, I had the same issue.
In TWRP, wipe all the partitions except the internal storage. Then flash the rom and choose wipe in Aroma.
Im sure you wouldn't have manually wiped the partitions. The Aroma for some reason doesn't do the job. Manually wipe it and the ROM will install properly

raghav kapur said:
Yes, I had the same issue.
In TWRP, wipe all the partitions except the internal storage. Then flash the rom and choose wipe in Aroma.
Im sure you wouldn't have manually wiped the partitions. The Aroma for some reason doesn't do the job. Manually wipe it and the ROM will install properly
Click to expand...
Click to collapse
Hi thanks for reply.
I was try wipe all partition use stock firmware etc.
Always same no imei and baseband the only one thing only on 4.4.2 show me message "Process com.htc.dialer isn't responding." and sometimes with some roms phone not rebooting stay online all time
Regards

I am having this, along with a litany of other issues as well.

Hi thanks for reply, how you fix this ?
I was book apoitment in HTC service care but phone is unlocked and s-off

I'm wondering the same thing -- I'm stuck. I'm not even S-Off so I can't use this guide, which you may be able to: http://forum.xda-developers.com/showthread.php?t=2541082

Hi I will try tomorrow this and post results
Thanks

I've got the exact same problem - guessing it's hardware related.
Except mine reboots after 30-60 seconds.
This is the second time its happened - sending back again to get repaired.
Now going on the mission of reverting to stock (again) Lucky i'm SOFF

Hi, i was try this return to stock tampered and relock from bootloader gone but all time phone rebooting (loop)
Put back to cid o2 uk try use ruu exe but all time give me error 158
I will send back the phone but i must flash o2 uk ruu first, second somebody try open the phone without success, scratches, dents around the edge
Regards

I'm having this same problem. I've wiped it several times and reloaded 2 different RUU's and Android Revolution. With Android Revolution I've stopped it from randomly restarting but I still get the process error and it doesn't show a Baseband or IMEI. When I used the getvar in cmd it shows my IMEI and everything looks good.. not sure if its a hardware problem or what. Any ideas and if I have to send it back can anyone direct me to a US T-Mobile stock RUU? I'm still new to this... just switched over from a Galaxy.

chickenburritos said:
I'm having this same problem. I've wiped it several times and reloaded 2 different RUU's and Android Revolution. With Android Revolution I've stopped it from randomly restarting but I still get the process error and it doesn't show a Baseband or IMEI. When I used the getvar in cmd it shows my IMEI and everything looks good.. not sure if its a hardware problem or what. Any ideas and if I have to send it back can anyone direct me to a US T-Mobile stock RUU? I'm still new to this... just switched over from a Galaxy.
Click to expand...
Click to collapse
Have a look here :
http://www.htc1guru.com/downloads/ruu-file-downloads/
I was relock remove all tampered and relock put back to my cid s-on try run the only one available ruu.exe
Code:
RUU M7 UL K44 SENSE55 MR O2 UK 4.20.206.16 Radio 4A.23.3263.28 10.38r.1157.04L Release 353143 Signed 2
File Size: 1.6 GiB - Downloads: 376
MD5: 4961fdbbadba53c9640f3638f56faec1
and ruu give me error 158 all time
right now in flash i have :
RUU Zip M7_UL_JB_50_HTC_Europe_1.20.401.1_Radio_4A.13.3227.06_10.27.1127.01_release_308001_signed_2_4
Click to expand...
Click to collapse
but cannot go back to my cid

Hi probably i due wrong but not have other way, because the o2 uk ruu is corrupt and is no ruu zip i deicide to change cid to HTC___01 and restore to 100% stock.
Today courier was pick up the parcel and now will waiting for HTC Service what's wrong with my phone hope can fix it under warranty.
Strange is in fastboot you can read all baseband imei etc. and when phone is on-line rebooting all time and imei baseband etc. is unknown
Regards

blackangel82 said:
Hi probably i due wrong but not have other way, because the o2 uk ruu is corrupt and is no ruu zip i deicide to change cid to HTC___01 and restore to 100% stock.
Today courier was pick up the parcel and now will waiting for HTC Service what's wrong with my phone hope can fix it under warranty.
Strange is in fastboot you can read all baseband imei etc. and when phone is on-line rebooting all time and imei baseband etc. is unknown
Regards
Click to expand...
Click to collapse
^^ hardware problem, not fixable via ruu or any other software method i've seen.

nkk71 said:
^^ hardware problem, not fixable via ruu or any other software method i've seen.
Click to expand...
Click to collapse
i was read riff box can repair imei etc. but it cost over 100 pounds
anyway i was send the phone to htc but with different cid with removed tampered and locked bootloader
Now i must just wait but with my luck this not be cover and i must pay for repair
Regards

Hi i was receive message from htc :
Dear Lukasz Lipinski
Our initial assessment of your device indicates that the repair work required is caused by damage that isn’t covered by warranty. Unfortunately, this means we must charge you for the repair.
We have prepared a quote for you which you can view, accept and pay for at
zam. 74H02404-02M, 74H02439-14M, 83H40000-20 Laser Etching,HTC,CATCHER,Silver,PN07100,M7#UL_B128L3720-C9#EMEA£33,95
zam. 51H10208-03M, Rigid-Flex Board ASSY,w/o_Regional_ID,USB board£5,28
Labor£22,00
Shipping£11,29
Tax£16,68
Please bill me for the full repair£89,20
If you decide not to complete this repair, your device will be returned to you following receipt of payment for the administration and shipping costs incurred. You may use the same link as above to arrange this.
Many thanks,
HTC Customer Care
Click to expand...
Click to collapse
Please follow the link, anybody know what means the parts ??

Was same problem! This post save my phone!
http://forum.xda-developers.com/showthread.php?t=2503646
+ Video https://www.youtube.com/watch?v=0WWNZpaQBh8

westua said:
Was same problem! This post save my phone!
http://forum.xda-developers.com/showthread.php?t=2503646
+ Video https://www.youtube.com/watch?v=0WWNZpaQBh8
Click to expand...
Click to collapse
Hi, sorry I didnt watch the youtube guide (yet again)... but just a quick question, the thread you posted:
[Tutorial][Rescue]Sprint HTC One users that flash GSM roms on their CDMA devices.
got your GSM (m7_u/ul) device back to life? or was it the other way around?

nkk71 said:
Hi, sorry I didnt watch the youtube guide (yet again)... but just a quick question, the thread you posted:
[Tutorial][Rescue]Sprint HTC One users that flash GSM roms on their CDMA devices.
got your GSM (m7_u/ul) device back to life? or was it the other way around?
Click to expand...
Click to collapse
I have sprint device, after downgrade, root it again and now it works grate using gsm. Viperone 5.8.0 + Elementalx 13.1

I was try downgrade, root, s-off etc. nothing works always same problem
I was send phone to htc it will be repaired but not cover by warranty
the cost is 89 pounds because htc must change rear cover which previous owner damage trying takes off screen
Regards

[Q] Trouble Installing Sense 6 Update

Hello, i'm trying to install the latest Sense 6 update on my HTC On; however, i get the following error message with the red triangle:
Finding update package...
Opening update package...
Verifying update package...
Installing update...
Verifying current system...
Check /data/preload/SoundHound_Freemium.apk failed, error No such file or directory ( )
Installation aborted.
Write host_mode: 0 done[/B]
Any help would be much appreciated!
Viv

When you unlock boot loader data/preload apps deleted so you have to restore them according to your your phone Rom version
from HTC One

sense 6
yatindroid said:
When you unlock boot loader data/preload apps deleted so you have to restore them according to your your phone Rom version
from HTC One
Click to expand...
Click to collapse
How would i do this?

viv_1980 said:
How would i do this?
Click to expand...
Click to collapse
Just to give you some more information, the boot loader on my phone is unlocked.
Not an expert with all this, will require simple step-by-step instructions.

What's your Software Version?

AndyyyFTW said:
What's your Software Version?
Click to expand...
Click to collapse
My software version is: 4.20.771.17

viv_1980 said:
My software version is: 4.20.771.17
Click to expand...
Click to collapse
ok you need some apps missing during unlock boot loader process
Which was at data /preload so you have to restore them like sound hound & others
How get these apk
find another HTC One with same software version install es file explorer on that
Open es explorer go to apps manager backup all apps which are HTC made like calculator flash light htc ringtonetrimmer htc sound recorder sound hound use your logic these apps are long name & version then any other apps
copy these apps to your phone data/preload use root explorer now try ota again ( if any error still there note that error & try solving same way)
Or easy & long way S Off your phone
Then just install THIS & try ota for next version & again next version until you get your desired version
from HTC One

Does this require the phone to be rooted? Just so you know, my phone is not rooted.
Sent from my HTC One using XDA Free mobile app

viv_1980 said:
Does this require the phone to be rooted? Just so you know, my phone is not rooted.
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
yes you need root
Bootloader locked or unlocked ?

yatindroid said:
yes you need root
Bootloader locked or unlocked ?
Click to expand...
Click to collapse
Facing a similar problem but with system/app/plusone.apk, the sense 5.5 OTA had come in without any issues, only this OTA is getting stuck. I am S-ON, bootloader locked with stock recovery. To use the Guru reset tool, is it necessary to be S-OFF? My s/w version is 4.19.1540.9, there is a 4.3 RUU available on Htc dev site? Can i download it and run the .exe on a computer with my phone being BL locked, stock recovery or we can not downgrade to 4.3 from 4.4.2? I was planning to run the 4.3 .exe ruu and then OTA twice to get sense 6.

coolboy2343 said:
Facing a similar problem but with system/app/plusone.apk, the sense 5.5 OTA had come in without any issues, only this OTA is getting stuck. I am S-ON, bootloader locked with stock recovery. To use the Guru reset tool, is it necessary to be S-OFF? My s/w version is 4.19.1540.9, there is a 4.3 RUU available on Htc dev site? Can i download it and run the .exe on a computer with my phone being BL locked, stock recovery or we can not downgrade to 4.3 from 4.4.2? I was planning to run the 4.3 .exe ruu and then OTA twice to get sense 6.
Click to expand...
Click to collapse
you can't downgrade with S-ON using a ruu. This is not required to to be s-off to use guru reset rom but s-off is required for the guru bootloader reset tool. There is also a nandroid backup of 5.11.1540.9 and the signed firmware in the dev edition updates thread, where you have already posted about the same issue. look at page 94

alray said:
you can't downgrade with S-ON using a ruu. This is not required to to be s-off to use guru reset rom but s-off is required for the guru bootloader reset tool. There is also a nandroid backup of 5.11.1540.9 and the signed firmware in the dev edition updates thread, where you have already posted about the same issue. look at page 94
Click to expand...
Click to collapse
Thanks a lot alray, i did see the tutorial and to use the Guru reset tool, i need to unlock my bootloader, flash TWRP, then flash Guru reset tool and read on screen instructions to flash a stock recovery and firmware. After that, i need to relock the bootloader and check for OTA updates. The guru reset available is 3.22.1540.1 and as you say it does not require S-OFF.
What would be a safer way? To use guru reset tool and then do OTA updates till the latest firmware or install the 5.11.1540.9 firmware, i have absolutely no clue on how to flash stock firmwares, if it is done through custom recoveries or stock recovery.
Thanks

coolboy2343 said:
Thanks a lot alray, i did see the tutorial and to use the Guru reset tool, i need to unlock my bootloader, flash TWRP, then flash Guru reset tool and read on screen instructions to flash a stock recovery and firmware. After that, i need to relock the bootloader and check for OTA updates. The guru reset available is 3.22.1540.1 and as you say it does not require S-OFF.
What would be a safer way? To use guru reset tool and then do OTA updates till the latest firmware or install TWRP and then flash the 5.11.1540.9 firmware using TWRP?
Thanks
Click to expand...
Click to collapse
don't lock bootloader until your work finished you don't need it unlocked bootloader will help you if you got some difficulty / error
Guru rest Rom not required s off but if ota over that version should be same with your current version if not ota will fail for example your current version is 5 you use guru reset rom with version 3 then you will update it with ota version 4 it will fail because S On will not let you flash firmware 4 over 5 so keep that in mind use guru reset with same version of your current version

yatindroid said:
don't lock bootloader until your work finished
Guru rest Rom not required s off but if ota over that version should be same with your current version if not ota will fail for example your current version is 5 you use guru reset rom with version 3 then you will update it with ota version 4 it will fail because S On will not let you flash firmware 4 over 5 so keep that in mind use guru reset with same version of your current version
Now I'm yatin kumar to yatindroid
Click to expand...
Click to collapse
Darn it, which means i cant use Guru reset as my current version is 4.19.1540.9 and there is no reset tool available for it. Dont want to play around with S-OFF etc as am planning to sell the phone and worried if something might go wrong during the process.
The last option available is to then use a 4.19.1540.9 but one user had said some where that4.xx RUU's are not working.
I tried but could not find a 4.19.1540.9 nandroid backup as well, will try the RUU and if it does not work then maybe wait for htc dev to release 4.4.2 RUU from their end.

Is there any way to do this without rooting?
Sent from my HTC One using XDA Free mobile app

viv_1980 said:
Is there any way to do this without rooting?
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
RUU only
from HTC One

coolboy2343 said:
The last option available is to then use a 4.19.1540.9 but one user had said some where that4.xx RUU's are not working.
I tried but could not find a 4.19.1540.9 nandroid backup as well, will try the RUU and if it does not work then maybe wait for htc dev to release 4.4.2 RUU from their end.
Click to expand...
Click to collapse
Why would you want to find a 4.19.1540.9 nandroid backup when I said at post #11 that there is a nandroid backup of 5.11.1540.9 and the 5.11.1540.9 signed firmware in the dev edition updates thread at page 94 (posted by me, users reported both nandroid and firmware working good)
@yatindroid : sorry for hijacking this thread.

Sorry but i have no clue at all on how to use that nandroid backup to update the phone. Do i need to unlock bootloader again, flash twrp and then restore that backup?
What to do with the firmware file?
Thanks
alray said:
Why would you want to find a 4.19.1540.9 nandroid backup when I said at post #11 that there is a nandroid backup of 5.11.1540.9 and the 5.11.1540.9 signed firmware in the dev edition updates thread at page 94 (posted by me, users reported both nandroid and firmware working good)
@yatindroid : sorry for hijacking this thread.
Click to expand...
Click to collapse

coolboy2343 said:
Sorry but i have no clue at all on how to use that nandroid backup to update the phone. Do i need to unlock bootloader again, flash twrp and then restore that backup?
What to do with the firmware file?
Thanks
Click to expand...
Click to collapse
unlock bootloader
flash twrp 2.6.3.3
boot phone in recovery
make a backup of ''Boot'' only (this is only to generate a backup path on your phone)
when completed, reboot phone in the OS, connected on your computer
browse your internal storage, go to TWRP/Backups/Your_Phone_serial/Some_date/
delete files in this folder (these are the file backed up previously to generate the backup path above)
extract the 5.11.1540.9 backup archive and copy all the files in the backup folder (previously generated) of your phone (TWRP/Backups/Your_Phone_serial/Some_date/) should have around 11 files (some .win .md5 files and a .log)
go back in twrp, select ''restore'' , select ''some_date'' folder, select all the partitions and swipe to restore
after the restore is completed, in twrp go to ''wipe'' then ''swipe to factory reset'' do not ''format data'' or ''advanced wipe''
reboot phone in the OS
if you want to update the firmware after restoring the backup:
relock bootloader
reboot bootloader
flash the firmware
Code:
fastboot oem rebootRUU
fastboot oem flash zip firmware.zip
fastboot oem flash zip firmware.zip
fastboot reboot
flashing firmware can be dangerous so be sure you understand what you are doing first, there is a lot of threads here explaining how to flash firmware.
---------- Post added at 05:43 PM ---------- Previous post was at 05:39 PM ----------
coolboy2343 said:
am planning to sell the phone
Click to expand...
Click to collapse
Why not just seeling the phone ''as is'' ?
if you have any other question please pm me, open another thread or post in the dev update thread so it will be easier for @yatindroid and @viv_1980 to continue troubleshooting viv_1980's issue.
there is also another thread that discuss the exact same issue you are having ''unexpected content'' of /system/app/plusone.apk on 4.19.1540.9: http://forum.xda-developers.com/showthread.php?p=53381299
Maybe you could try what I said in that thread before messing with backups and firmware.

Problem solved
Thanks a ton to @alray, @yatindroid and @SaHiLzZ, i finally downloaded the 4.19.1540.9 RUU from Android ruu, connected to windows 7, used the .exe file and it smoothly flashed the stock firmware. After it, updated OTA to sense 6 and this time the update went smoothly and my M7 is now updated to sense 6. It is completely stock now, will easily get OTA updates in future and i wanted to set things right before selling it off so that the future owner does not face issues with the phone, not every one is a member of Xda .
Thanks guys

[Q] Returning HTC One M7 to stock. Assistance required with RUU.

Hi.
I should start by saying that I am completely new to rooting phones. I think it's fair to say that I am in over my head!
I am attempting to return my HTC One M7 back to stock. I have relocked to bootloader but am unable to find a RRU that is compatible with my device. I basically want my phone as it was (able to receive official OTA's etc). My phone is S-on and hasnt been S-off. I'm not confident enough to go S-off.
My phones details are shown in the attached photo. My CID is ORANG001 (UK EE).
I have been through the extensive list but none are compatible with my device.
Any assistance offered would be appreciated. Remember - speak slowly!
Thanks.

IchiKiriyama said:
Hi.
I should start by saying that I am completely new to rooting phones. I think it's fair to say that I am in over my head!
I am attempting to return my HTC One M7 back to stock. I have relocked to bootloader but am unable to find a RRU that is compatible with my device. I basically want my phone as it was (able to receive official OTA's etc). My phone is S-on and hasnt been S-off. I'm not confident enough to go S-off.
My phones details are shown in the attached photo. My CID is ORANG001 (UK EE).
I have been through the extensive list but none are compatible with my device.
Any assistance offered would be appreciated. Remember - speak slowly!
Thanks.
Click to expand...
Click to collapse
Restore you stock backup .. their is no files available for your phone

Thanks.
How would I go about that?

IchiKiriyama said:
Thanks.
How would I go about that?
Click to expand...
Click to collapse
do you have custom recovery ?

IchiKiriyama said:
Thanks.
How would I go about that?
Click to expand...
Click to collapse
just on a side note, please tell us you DIDNT re-lock your bootloader with a cutom recovery on your phone like TWRP or CWM ?
sorry to butt in @clsA just had to ask as I wouldnt know what to do for him if there is no files availble.

I had attempted to install a custom rom but the installation failed and it factory reset my phone. Basically, I appear to be using my stock RUU but ota is appears to be disabled. I attempted to install this rom, followed these instructions: http://forum.xda-developers.com/showthread.php?t=2189373

IchiKiriyama said:
I had attempted to install a custom rom but the installation failed and it factory reset my phone. Basically, I appear to be using my stock RUU but ota is appears to be disabled. I attempted to install this rom, followed these instructions: http://forum.xda-developers.com/showthread.php?t=2189373
Click to expand...
Click to collapse
Ok that's fine
you need to unlock the bootloader now at htcdev.com so you can flash the correct recovery to you phone
download TWRP 2.8.5.0 here > http://techerrata.com/browse/twrp2/m7
flash it
fastboot flash recovery openrecovery-twrp-2.8.5.0-m7.img
fastboot erase cache
fastboot reboot-bootloader
enter recovery and copy your rom to your phone again and install it again
no need to wipe again / theirs no RUU for your phone so no need to relock the bootloader any more

Very helpful. Thanks.
I'm sorry to cause further frustration, but could you give me simpler instructions? I don't want to make my situation any worse!
As I said above, I'm in way over my head.

IchiKiriyama said:
Very helpful. Thanks.
I'm sorry to cause further frustration, but could you give me simpler instructions? I don't want to make my situation any worse!
As I said above, I'm in way over my head.
Click to expand...
Click to collapse
Humm that's as simple as it gets
go to http://www.htcdev.com/bootloader
follow the instructions to unlock the bootloader
when it's done download TWRP 2.8.5.0 and Flash it same as you did the unlock token above, in a command prompt from the folder with fastboot in it.
when you get to the TWRP recovery screen copy your rom to the phones storage and then click install it in TWRP
choose your file you just copied and let it install
the first reboot to lollipop will take a long time ...be patient
actually your not on 7.x firmware .. you need to flash an older rom
Use this one >> https://www.androidfilehost.com/?w=files&flid=22071
it matches your firmware better

Thanks. And that'll return my phone to stock?

[REQUEST] a ROM for 64-bit models A11_UL

I have bricked my Desire 510. I need a ROM to flash through philz touch recovery, if some one in Australia has this device with philz touch can you please make a backup in the recovery and then post it to me! Its my last hope because no RUUs are working.
Either that or make me a ROM that is for the Australian telstra 64-bit model maybe some ome can teach me how to create and compile it my self.

Have you tried a backup first ?
Vmo x said:
I have bricked my Desire 510. I need a ROM to flash through philz touch recovery, if some one in Australia has this device with philz touch can you please make a backup in the recovery and then post it to me! Its my last hope because no RUUs are working.
Either that or make me a ROM that is for the Australian telstra 64-bit model maybe some ome can teach me how to create and compile it my self.
Click to expand...
Click to collapse
This seems like a Strange question I know, But have you tried doing a BACKUP FIRST ?
Now having had to rescue a couple of these phones (3 to be precise) , (all with the same nandroid backup I might add)
(With No help from HTC - where are the RUU links for our phone I have to ask?, that having been said, thanks HTC for letting me unlock bootloader, (still cool) I take it all back.....)
I have found however that if a flash completes but is no good , fails to boot for example, that if you FIRST, take a backup with philz of your corrupted system, - to allow the recovery to write a last log to (broken) system with mount points,phone specifics about baseband, serial no., etc,.. BEFORE trying to restore a Good copy of a nandroid backup
(hope you have one! )
That you should then be able to restore a nandroid backup to phone. sometimes even a nandroid that failed last time. (due to failing to find mount points)
A quick note on this point is that only backups made while booted into recovery have proven successful when trying to restore backups thus far, all methods of taking backups any other way are/will be corrupted and will not prove in any way useful to restore your device.
Most of the RUU updates are wrong bootloader by the way they are based on 3.4 kernel (32bit) and not 3.10 kernel which is what 64 bit is running.
I would offer you a copy of a nandroid myself but I am aware that radio firmware is tied to carrier and probably would not work for your baseband and carrier setup. If all else fails however you are of course welcome to try, (pm me if you need a copy) I dont think it will be too long before a successful port to our phone anyway.
Good-luck,
ki113r.

Please send me a nano backup when youre on EU models orange romania
jsjohnsheehan said:
This seems like a Strange question I know, But have you tried doing a BACKUP FIRST ?
Now having had to rescue a couple of these phones (3 to be precise) , (all with the same nandroid backup I might add)
(With No help from HTC - where are the RUU links for our phone I have to ask?, that having been said, thanks HTC for letting me unlock bootloader, (still cool) I take it all back.....)
I have found however that if a flash completes but is no good , fails to boot for example, that if you FIRST, take a backup with philz of your corrupted system, - to allow the recovery to write a last log to (broken) system with mount points,phone specifics about baseband, serial no., etc,.. BEFORE trying to restore a Good copy of a nandroid backup
(hope you have one! )
That you should then be able to restore a nandroid backup to phone. sometimes even a nandroid that failed last time. (due to failing to find mount points)
A quick note on this point is that only backups made while booted into recovery have proven successful when trying to restore backups thus far, all methods of taking backups any other way are/will be corrupted and will not prove in any way useful to restore your device.
Most of the RUU updates are wrong bootloader by the way they are based on 3.4 kernel (32bit) and not 3.10 kernel which is what 64 bit is running.
I would offer you a copy of a nandroid myself but I am aware that radio firmware is tied to carrier and probably would not work for your baseband and carrier setup. If all else fails however you are of course welcome to try, (pm me if you need a copy) I dont think it will be too long before a successful port to our phone anyway.
Good-luck,
ki113r.
Click to expand...
Click to collapse
i was brick my phone and i need help please send my a recovery img my root kep working

jsjohnsheehan said:
This seems like a Strange question I know, But have you tried doing a BACKUP FIRST ?
Now having had to rescue a couple of these phones (3 to be precise) , (all with the same nandroid backup I might add)
(With No help from HTC - where are the RUU links for our phone I have to ask?, that having been said, thanks HTC for letting me unlock bootloader, (still cool) I take it all back.....)
I have found however that if a flash completes but is no good , fails to boot for example, that if you FIRST, take a backup with philz of your corrupted system, - to allow the recovery to write a last log to (broken) system with mount points,phone specifics about baseband, serial no., etc,.. BEFORE trying to restore a Good copy of a nandroid backup
(hope you have one! )
That you should then be able to restore a nandroid backup to phone. sometimes even a nandroid that failed last time. (due to failing to find mount points)
A quick note on this point is that only backups made while booted into recovery have proven successful when trying to restore backups thus far, all methods of taking backups any other way are/will be corrupted and will not prove in any way useful to restore your device.
Most of the RUU updates are wrong bootloader by the way they are based on 3.4 kernel (32bit) and not 3.10 kernel which is what 64 bit is running.
I would offer you a copy of a nandroid myself but I am aware that radio firmware is tied to carrier and probably would not work for your baseband and carrier setup. If all else fails however you are of course welcome to try, (pm me if you need a copy) I dont think it will be too long before a successful port to our phone anyway.
Good-luck,
ki113r.
Click to expand...
Click to collapse
i have a similar case, i was able to get 64 bit RUU's from the internet (Asia WWE, and HTC Europe) but i can't flash them, the following is a description of the situation:
1. bootloader unlocked, custom recovery installed.
2. S-ON,
3. no userdata (system partition ?) i don't know the difference, i can flash boot (kernel) and recovery.
4. i can't flash the above mentioned roms since it is saying i have wrong CID, and i can't change the CID because S-ON
any tips ?
* i was able to download, compile & build kernel from source for telstra, i don't know how system (or userdata) image is built, any hint on that as well ?

mohsh86 said:
i have a similar case, i was able to get 64 bit RUU's from the internet (Asia WWE, and HTC Europe) but i can't flash them, the following is a description of the situation:
1. bootloader unlocked, custom recovery installed.
2. S-ON,
3. no userdata (system partition ?) i don't know the difference, i can flash boot (kernel) and recovery.
4. i can't flash the above mentioned roms since it is saying i have wrong CID, and i can't change the CID because S-ON
any tips ?
* i was able to download, compile & build kernel from source for telstra, i don't know how system (or userdata) image is built, any hint on that as well ?
Click to expand...
Click to collapse
"fastboot getvar cid" and post your CID.

lucyr03 said:
"fastboot getvar cid" and post your CID.
Click to expand...
Click to collapse
Hi Mate,
i've got the following:
Code:
cid: TELST001
i was thinking hex editing the zip file to replace the cid, but since its zipped i can't find the plain text to get it replaced.
thanks in advance.

Have u relocked the bootloader and then tried to install the RUU?
I had the same problem with restoring the orginal Rom.
I think the command for relocking the bootloader was "fastboot oem relock"

SpitFireXB360 said:
Have u relocked the bootloader and then tried to install the RUU?
I had the same problem with restoring the orginal Rom.
I think the command for relocking the bootloader was "fastboot oem relock"
Click to expand...
Click to collapse
I've already done that, having the bootloader unlocked will throw another error, this was incorrect CID related one.
my phone is on Telstra (Australia) ROM, sadly, the RUU exists on some Persian forums with paid service, if there is a way where i can compile/build the system image from source, please let me know..

mohsh86 said:
I've already done that, having the bootloader unlocked will throw another error, this was incorrect CID related one.
my phone is on Telstra (Australia) ROM, sadly, the RUU exists on some Persian forums with paid service, if there is a way where i can compile/build the system image from source, please let me know..
Click to expand...
Click to collapse
I will make backup of my system and boot wih phillz, but I'm from EU(64bits)

lucyr03 said:
I will make backup of my system and boot wih phillz, but I'm from EU(64bits)
Click to expand...
Click to collapse
thanks mate, but will it flash ? and shall i flash it using recovery or htc_fastboot ?
---------- Post added at 12:58 PM ---------- Previous post was at 12:25 PM ----------
mohsh86 said:
thanks mate, but will it flash ? and shall i flash it using recovery or htc_fastboot ?
Click to expand...
Click to collapse
and mine is 64 bit btw

mohsh86 said:
thanks mate, but will it flash ? and shall i flash it using recovery or htc_fastboot ?
and mine is 64 bit btw
Click to expand...
Click to collapse
First flash this recovery.
Status: Uploading, sorry for my slow upload speed
P.S: My ROM is not stock, missing few system apps and have modifications by me, SORRY

lucyr03 said:
First flash this recovery.
Status: Uploading, sorry for my slow upload speed
P.S: My ROM is not stock, missing few system apps and have modifications by me, SORRY
Click to expand...
Click to collapse
thanks mate,
please let us know the link for the upload
cheers

May I inquire as to how you got S-ON? I'm hoping mine isn't a door stop. It's stuck and out of commission. Not sure at all what to do at this point. Please help....
---------- Post added at 02:19 PM ---------- Previous post was at 02:12 PM ----------
I know RBHeromax made a kernel for our 64bit and was attempting a ROM. But I haven't checked in the progress today, I'm about to however. Can you please send me a copy of your 64 link? St this point I'll try just About anything. I'll keep you posted

Please helpme find RUU for A11_UL.
My device CID is: HTC__059.
Thank.

Htc desire 510 64 bit
lucyr03 said:
I will make backup of my system and boot wih phillz, but I'm from EU(64bits)
Click to expand...
Click to collapse
salut imi poti da te rog backup stock rom de la telefonul tau te roog mult.

htc desire 510 telstra backup files
you need to make a folder named back up then another folder named 2014-01-01.00.46_KTU84L_release-keys
sorry about the spaces but i couldn't post it any other way
https://drive.google.com/open?id=0B...lMZWRXcWJtNzdPWklUMHE0MVc0dE1ENGxDZkNaZ21seDA
download everything from here and put it in the folder and you should be ok

razza15 said:
you need to make a folder named back up then another folder named 2014-01-01.00.46_KTU84L_release-keys
sorry about the spaces but i couldn't post it any other way
https://drive.google.com/open?id=0ByGpSt5l7872fldKRE9mUkc0M1lMZWRXcWJtNzdPWklUMHE0MVc0dE1ENGxDZkNaZ21seDA
download everything from here and put it in the folder and you should be ok
Click to expand...
Click to collapse
please let me know if anyone has any issues

Hello guys,
i can't find a stock rom for my phone.. having a european 64bit Desire 510 CID: htc_031
i hope someone can help me out!
Grtz Marco

razza15 said:
please let me know if anyone has any issues
Click to expand...
Click to collapse
Silly question...but how do I flash these files to the device?
Thanks in advance!

ruu for htc desire 510 64 bit and 32 bit
bobbytables22 said:
Silly question...but how do I flash these files to the device?
Thanks in advance!
Click to expand...
Click to collapse
okay first off lock your bootloader here are the ruu's for 32 bit and 64bit htc desire 510 series
if you are Europe carrier use any of the 64 bit roms make sure boot loader is locked!!
it wont let me post the link for the ruu.exe so email me [email protected]
i will send the link for the ruu for all 64bit models will work no matter what carrier you have
no need to thank me