Hello everyone. I've using desire 500 single sim. Ive crashed lcd, so ive changed it by my self. After using it crashes again. Lcd still working in good condition, but touch screen is not propertly working. I mean half of screen (from top to middle) is not touchible. Ok I was fine with it. And i was still using it. Then i left ma cell in lorry for month about (i thought it was stollen). After i found it, i cant run it. Battery is ok. I charged it. But i still can not start the phone. The reason i writiting in new thread is i cant go into Low volume + power button to load bootmenu. Ive been searching for info for all the internet and all the help starts from entering boot menu.
When i connect charger the orange light comes up. But it not dissapier when i disconnect the cable. When i connect it to computer it beeps. It sound its ok, but computer cant find it as a device.
When i try to start the phone during cablle connected, orange light dissapier for a short time and comes again by it self.
Could anyone smarter than me help me to fix ma cell phone? Thanks alot guys and sorry for new thread.
Sorry for my propper english.
Related
Guys, i have a Diamond, but, yesterday the diamond turn off, and don´t turn on, i tried to do a soft and hard reset and nothing, i tried to enter in bootmode and nothing, when i put the battery the screen turn on, and the diamond vibre, but nothing else, what i can do??
rmorera84 said:
Guys, i have a Diamond, but, yesterday the diamond turn off, and don´t turn on, i tried to do a soft and hard reset and nothing, i tried to enter in bootmode and nothing, when i put the battery the screen turn on, and the diamond vibre, but nothing else, what i can do??
Click to expand...
Click to collapse
what did you do *before* your diamond stopped turning on?? unless you had a completely unpredicted system meltdown of your diamond for injecting it with super high voltage. it is rare for it to not power off unless you did something ... so please elaborate so we can assist better.
Ok, yesterday i use the phone like anothe normal day, in the night i turn off the phone, and in the morning, when i tried to turn on, i have this problem, for example, when a tried to do a soft, hard reset, the screen is in black, when a conect the phone to the usb the screen is black, is, i left the phone alone, in 3 minutes the black screen again, i don´t know why.
any LED activity when plugged into USB?
I think it is a major manufacture problem
I had the same problem, taking out the battery waiting a while and inserting it back, will solve the problem for some time but it will happen again.
Finally I sent it to the HTC support center.
I don't understand why HTC didn't recall.
If you'll search this forum you'll see the same problem in different stages, some times it's a blank screen but the phone will ring and some are just freeze.
Hi, I've had my Diamond for about a month soon and it started earlier this week by not wanting to come on at all. Been taking out the battery for a few days but eventually got fed up and did a hardware reset tonight. Not long after that it just suddenly turned itself off and I couldn't get it back on again. I thought I'd pack it back into the box it came in and send it back tomorrow and took out the sim card. After that it came to life again.
Happened to get a call after that and that call was suddenly disconnected without any reason.
So I am not very happy with this phone at the moment. Would appreciate any advice or if you know for sure it can't be sorted maybe I should send it back and ask for another one?
Blazeitup123 said:
any LED activity when plugged into USB?
Click to expand...
Click to collapse
Nothing, but one time the pc detect the phone, but later nothing.
No Led activity either on mine when it went dead.
When the Phone goes dead, try cooling the phone down as much as possible, and try starting it up again.....
There is a problem with the HTC Diamond in that it can cook itself (excessive heat), due to the auto over temp function crashing and not switching off the phone..... (That's what I have been told at least...)
I know over around 5 Diamonds so far that have had this issue, where the symptoms slowly get worse...
Have a look at this thread....
http://forum.xda-developers.com/showthread.php?p=2905775#post2905775
PLEASE P.M. me if you have any of the symptoms described in the thread...
I have been TRYING to get my Diamond fixed under warranty now for 2 months with little success... And I kinda need to know how wide spread this problem is to proceed any further.
could not turn on after blank screen ...
Hello,
I've had the same issue as rmorera, and after I hard reseted the phone all went o.k.. BUT after I reinstalled part of the small apps I use, the phone started to go off again. So, the problem seems to be in the software ...
I believe the cause might be the SRS WOW which I use. I installed the .cab, then the .reg file provided (ufortunatelly I don't remember from which thread I got the files ...). And shortly after, the phone stopped working. I uninstalled the software, and now it works! Could it be that the SRS WoW did this?
I tried to reinstall the SRS WoW and I found that if enabled for "Internal (Stereo)" instead of "Headphones" it gets my phone shut when the WM blanks the screen. If I select the "Headphones" options the issue seems to disappear.
Still, the SRS WoW damages the volume buttons action, but I think this issue is on another thread ...
Hello, I know there are many posts about dead Diamonds but I think my situation is different. I went to sleep one night and left my HTC to charge from my PC's USB. It was charging correctly because I noticed the light around the center button. All good. When I woke up, the charging light was still present and I unplugged the phone from the USB and the light was still surrounding the center button. The screen wouldn't turn on so I had to remove the battery. After I removed the battery and place it again in my HTC, it didn't want to turn on... I have tried to recharge it but the light doesn't flash anymore.. Not on my 220 socket, not on USB... I have a ROM found on this forum and been using it for 8 months with no problem... I just found my HTC froze at the charging step and removed the battery. After that it just won't start... I have managed two times to power on the device by it's normal power button but when it gets to the home screen, it freezes and I have to remove the battery again. It's been 7 days now and I can't power on once... Do you have any idea what happened ?
Thank you
If it keeps freezing at the home screen you are going to have to do a hard
re-set to unlock it. My Diamond froze at the home screen once when it was
new. I did a hard reset and it was fine after that. You will lose your data.
jbh00jh said:
If it keeps freezing at the home screen you are going to have to do a hard
re-set to unlock it. My Diamond froze at the home screen once when it was
new. I did a hard reset and it was fine after that. You will lose your data.
Click to expand...
Click to collapse
Yes, the problem is that it won't turn on now... I can't do anything...
namo77
Hi
I have got more less same problem , when i try to turn it on ; show touch diamond in the middle of black screen and 3 line digit on the right bottom corner in red ( R , G and D ) , and that is it nothing else , when i tried to connect it PC it's not establishing conection as well so i am really stuck don't know what to do , please any help advise how to fix it .
thanks of any tip or advise thank you very much
am having the same problem
i've got the same issue here, i can't recharge my htc diamond, the charging light won't show up or it shows up twice and then nothing..i managed to start the device a couple of times but it's really strange beacuse the battery level is signe always at zero and then the device restarts itself ...
so, resuming:
i can't recharge the device
it freezes sometimes
how can i fix this problem?...
I've tried all of the other fix its to get my Galaxy Tab to work. I've tried charging for 12 hrs via wall charger (no response)... I've tried holding the power button plus home key while tapping on the screen at the same time for over 2 minutes (no response) ... I've even tried putting it into download or recovery mode by holding the power button plus the volume key (up or down) for over 2 or minutes (no response) ...
If you're like me and thought the manufacturer was your only option left, there is one thing left you can try.
All I did was remove the shell and unplugged the battery for 30 mins, plugged it back up and viola!!! I have the battery charging icon. And it now boots perfectly into the OS.
Its worth a shot.... here's a video I watched to learn how to remove the shell.
http://www.youtube.com/watch?v=QeRaQR7RU0I
Step by step at ifixit.com
http://www.ifixit.com/Teardown/Samsung-Galaxy-Tab-Teardown/4103/1
Note: you will need a tri-wing screw driver to remove the first two screws. I didn't have one and just used a precision flat head screw driver and it worked like a charm if using enough down force so you won't strip the screw.
Hope this helps someone...
Battery removal resets almost everything -- I'm grateful for your confirmation that it works on the Tab, and also for your links to the hammerless teardown.
noguru said:
Battery removal resets almost everything -- I'm grateful for your confirmation that it works on the Tab, and also for your links to the hammerless teardown.
Click to expand...
Click to collapse
XDA forums has helped me so much, so I'm glad to return the favor to those that need it!
good find
not had the problem myself, but that info is now in my brain for whenever I do have a problem
Good. Thx man!!!
Many thanks man, this saved my (tablets) life. Switched off my tablet last night after charging, for the first time in weeks, just to refresh everything. Tried switching back on this morning and nothing. I've spent all day trying to find out what the hell was wrong and tried all the various button solutions others have mentioned. Nothing worked. came across your info and links and thought I'd give it a try as I had nothing left to lose, tablet was dead. Voila!...back up and running again. I won't be switching it off again in a hurry. Once again great info and much appreciated.
Nice info, really helpfull, my friend gtab p1000 have some problem, wont turn on, and i found this thread, i just try once, and amazing its working, i hit thanks to you
My have turn off and dont turn on, i wiated 2 days and plugged in wall charger, and they work again.
dead tab
still got no luck...i'm tried of your skill yesterterday n my tab still won't turn on...
thanks for the advice
hai, i saw your posting and thank god it really helpful. i own a p1010 and some how it cant turn on twice!. what ever i do, and what ever tricks available in the internet i had tried it all, all with no success. so the first time around i had to sent it for repair and because my tab's warrant had already ended i had to fork out a lot just to make it running. the repair shop just stated that the battery and the touch screen need to be replace. how stupid of me to fall for that. after that my tab is usable again. then it happend again. two days later the same problem occurred. now i know it is not the hardware but the software that causeing all this headache.
now, with your posting, i opened my tab, disconnected the battery for 15 minutes and walla my tab is ok again. phew...save me a lot of money.
i see that the problem might be in the software. i see that alot of p1010 owners face the same problem here after upgrading from froyo to GB. and i notice that the blank screen syndrome would happen if we put it in a standby mode (my standby mode would be you touch the power button once just to make the screen goes blank).
just my 2cents.
amirrash said:
hai, i saw your posting and thank god it really helpful. i own a p1010 and some how it cant turn on twice!. what ever i do, and what ever tricks available in the internet i had tried it all, all with no success. so the first time around i had to sent it for repair and because my tab's warrant had already ended i had to fork out a lot just to make it running. the repair shop just stated that the battery and the touch screen need to be replace. how stupid of me to fall for that. after that my tab is usable again. then it happend again. two days later the same problem occurred. now i know it is not the hardware but the software that causeing all this headache.
now, with your posting, i opened my tab, disconnected the battery for 15 minutes and walla my tab is ok again. phew...save me a lot of money.
i see that the problem might be in the software. i see that alot of p1010 owners face the same problem here after upgrading from froyo to GB. and i notice that the blank screen syndrome would happen if we put it in a standby mode (my standby mode would be you touch the power button once just to make the screen goes blank).
just my 2cents.
Click to expand...
Click to collapse
Hi, I got same problem with you guys with my P6800. Tried all those methods (execpt those removing the casing/battery). I followed one tip and it works. Press and hold the power button for 20 second and release it. The screen displayed an image (icon?) of battery and clock. Some said it also work by pressing the button for 10 second.
thanks for the advice guys
holding the power button works
but my question is why is this happening?it wasnt happening before?
mayurh said:
thanks for the advice guys
holding the power button works
but my question is why is this happening?it wasnt happening before?
Click to expand...
Click to collapse
guys
does no one know whats causing this? is it a firmware issue? or battery?
for me, this happens every time I use the Netflix app. if I don't go into task manager and clear memory after every use of Netflix, my galaxy tab will not turn back on. sometimes fully charging it will wake up the screen, but that's not helping today so I guess I need to remove the shell even though I don't want to. I miss pocket PC's with soft reset buttons!!!
dargpat said:
I've tried all of the other fix its to get my Galaxy Tab to work. I've tried charging for 12 hrs via wall charger (no response)... I've tried holding the power button plus home key while tapping on the screen at the same time for over 2 minutes (no response) ... I've even tried putting it into download or recovery mode by holding the power button plus the volume key (up or down) for over 2 or minutes (no response) ...
If you're like me and thought the manufacturer was your only option left, there is one thing left you can try.
All I did was remove the shell and unplugged the battery for 30 mins, plugged it back up and viola!!! I have the battery charging icon. And it now boots perfectly into the OS.
Its worth a shot.... here's a video I watched to learn how to remove the shell.
http://www.youtube.com/watch?v=QeRaQR7RU0I
Step by step at ifixit.com
http://www.ifixit.com/Teardown/Samsung-Galaxy-Tab-Teardown/4103/1
Note: you will need a tri-wing screw driver to remove the first two screws. I didn't have one and just used a precision flat head screw driver and it worked like a charm if using enough down force so you won't strip the screw.
Hope this helps someone...
Click to expand...
Click to collapse
Hello guys, thanks for your support and excuse me for my english but i'm the same problem with my GT-P1000(i've seen it on the back of my tab !). I've let it charging several hours and try to connect it to Odin which doesn't recognize it ! I got always a black screen and the rear flash led flashing flashing and flashing when it's connected to charger or my PC or when i keep pushing the power button ! Before the brick state i've follow the bad tutorial to root my tab and i've flashed a firmware for galaxy tab 10.1 inch ! Can i try this method?
sephiroth225 said:
Hello guys, thanks for your support and excuse me for my english but i'm the same problem with my GT-P1000(i've seen it on the back of my tab !). I've let it charging several hours and try to connect it to Odin which doesn't recognize it ! I got always a black screen and the rear flash led flashing flashing and flashing when it's connected to charger or my PC or when i keep pushing the power button ! Before the brick state i've follow the bad tutorial to root my tab and i've flashed a firmware for galaxy tab 10.1 inch ! Can i try this method?
Click to expand...
Click to collapse
u flashed tab 10.1 rom into P1000? oh man..
i think it bricked already.. there's nothing left that u can do, flashing back via odin, removing battery or else.. unbrickble mod method is the only way..
Sent from my GT-P1000
same problem
Manuele83 said:
Good. Thx man!!!
Click to expand...
Click to collapse
i have a similar problem my grandson mess up the digitalaizer and i ordered a new one and installed my self. because the tablet been w/o charge for almost a week until i get the new parts and fixed now won't get on, i plug in to charge for 24 hours is showing the 100% battery but still won't start. i look around do different things w/o luck i press the power and the -volune key and nothing, after left ed charging again i unplug the battery for few hours and nothing. i really need help on this. tk's
Hi Everyone,
I haven't been on here for a while. I have a HTC one that has stopped working. It is flashing the home and back buttons when I try to power it up and the LED light isn't working when I plug it in.
I Have managed to mess around enough with it trying the bright light trick and all combinations of power + volume down/up buttons to try and get it to spring into life. Iv e tried these connected to a charger and connected to the laptop as well.
When I press the volume down button and hold it the LED came on and started to flash, then it became constant red. I've left it charging overnight and its now a constant green so fully charged or so it thinks. Ive since tried the combination of buttons again but when I do the led goes off.
Ive scoured the internet last night for anyone with my similar situation and found a lot of posts but none that match my situation exactly.
When I turn it on normally nothing happens apart from the on sound and the under device manager it says "HTC MTP Device".
I m going to make a quick vid and put it on youtube and add the link in here just in case anyone has been in this situation before and found a remedy.
Before anyone asks I don't know what rom was on it, or if it was unlocked bootloader. I bought it second hand and just started using it. It went off mid day with plenty of battery and it wasn't hot.
Any help would be most appreciated as im running out of ideas fast!. plus my fingers are sore...lol.
Thanks for reading
Steve
Hi Everyone,
I was hoping someone would be able to help me with this as I've been at it for hours and I still can't do anything.
Basically at this point I think my phone is stuck in a reboot, what happens is when I open the phone the LG logo pops up, after that the T-Mobile 4G LTE screen with the white background shows up and the phone basically either gets stuck on that screen until the charging is finished or reboots every hour or so. I don't understand whats going on I've never touched the phones files and I've never rooted etc. I've also tried to hard reset but its the same problem. I found a ROM for this phone (original from TMobile) and I was planning on trying to install that and hopefully getting it to work but for that I need to be able to get into download mode, whenever I hold the volume up button and plug the cable in it goes straight to charging and my laptop says USB Charge only Interface (tried all 4 ports), I've also installed the LG United Mobile Driver but to no avail. Since my laptop is not recognizing that my phone is plugged in other than a simple sound and the laptop charging the phone I don't know how else I can get the phone to work because I cant access developer options either for the phone because of the reboot / stuck problem.
Does ANYONE have a fix for the problem? I don't want to go out and buy another phone because I really like this phone. I hope there's a fix. Thank you.
Ive come back to this issue and I still haven't found a solution, I'd be forever grateful if anyone has!