hd+ dual bootable stock/CM11-not mess w/stock - Nook HD, HD+ Q&A, Help & Troubleshooting

I want to install CM11 onto my external SDcard, not touching the B&N stock OS or rooting it in any way , so as not to void the warranty. #1 is this possible?
I built the SDcard, creating partitions: BOOT (0x0c FAT32 LBA & set Active),SYSTEM, DATA partitions.
I downloaded Succulent's "cm_ovation_11.0_02JUL2014_HD_SDC" file, unzipped it and copied the 6 files from it (MLO first)
Booted the HD+ but it didn't boot to sd,-- only did the normal Nook boot and hung at 99% loading the nook OS.
I then saw something about needing to install CWM Recovery first and boot that, so I located a download for CWM, but found it contains the same files as Succulent's "cm_ovation......" file (MLO, etc.). So if I were to extract that to the BOOT partition, I'd overwrite what I extracted from his zip.
So I'm missing some pieces to the trick....

Try using bokbokan's version and instructions here:
http://forum.xda-developers.com/showthread.php?t=2583952
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
Try using bokbokan's version and instructions here:
http://forum.xda-developers.com/showthread.php?t=2583952
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Thank you, but I had customized my partitions, and was hoping to stay with them, versus overwriting them with an image someone made that has pre-picked partitions. That is, unless somehow I can resize the partitions he made (and at which point in the process?) On mine I had 4 partitions. the last one was just an NTFS one, 6GB, I was hoping to keep available for just general storage, not necessarily for KitKat's use.

See http://forum.xda-developers.com/showpost.php?p=49007593&postcount=84 for pointers on creating CM11 SDcard with customized partition sizing. You should be able to create and maintain a 4th partition (but you'd need to figure out how to mount the partition so as to make it accessible to Android and/or your PC OS).

cm11 boot to sd
Ok, I must be missing some simple step.
In that link Digimax sent me, I believe I followed all steps. I ended up with these files on the BOOT partition (as seen in windows):
The 6 files extracted from sdcard-ovation-cm11.0-v1.img
pa_gapps-modular-mini-4.4.4-20141121-signed
cm-11-20140804-UNOFFICIAL-bok-ovation
a folder called LOST.DIR (not sure what that's from)
I choose "Boot to CWM Recovery" and I first did a backup. Then I selected "Install ZIP" then "Choose zip from sdcard" & I see
/sdcard/
- 0/
- clockworkmod/
That's it. Nothing else. Selecting either one of these displays no zip files. What am I doing wrong? In that post, step 4 it mentions "pair" of zip files. I assume though the 2nd item in the "pair" is the Gapps zip. Cuz for HD+ all I see is one file: cm-11-20140804-UNOFFICIAL-bok-ovation. (it doesn't have "sgt7" in the name anymore.) I assume I don't need the one for the regular HD model.

baytee said:
Ok, I must be missing some simple step.
In that link Digimax sent me, I believe I followed all steps. I ended up with these files on the BOOT partition (as seen in windows):
The 6 files extracted from sdcard-ovation-cm11.0-v1.img
pa_gapps-modular-mini-4.4.4-20141121-signed
cm-11-20140804-UNOFFICIAL-bok-ovation
a folder called LOST.DIR (not sure what that's from)
I choose "Boot to CWM Recovery" and I first did a backup. Then I selected "Install ZIP" then "Choose zip from sdcard" & I see
/sdcard/
- 0/
- clockworkmod/
That's it. Nothing else. Selecting either one of these displays no zip files. What am I doing wrong?
Click to expand...
Click to collapse
It does not appear that you've made any mistake. It's possible that bokbokan's CWM recovery has changed since I wrote up that guide nearly a year ago (and shortly thereafter have gone onto flashing/running CM11 on emmc and thus would have missed any such change).
One possible solution you might consider trying is to download or copy the ROM and Gapps zip files to your HD+ user-media partition, then while in CWM recovery menu select "... zip files from emmc" and browse to where the ROM/Gapps zip files are located.
In that post, step 4 it mentions "pair" of zip files. I assume though the 2nd item in the "pair" is the Gapps zip.
...
Click to expand...
Click to collapse
Yes, that's correct.

bok build install behaves super flaky for me
One possible solution you might consider trying is to download or copy the ROM and Gapps zip files to your HD+ user-media partition, then while in CWM recovery menu select "... zip files from emmc" and browse to where the ROM/Gapps zip files are located.
I got the sdcard to boot after many reboots and had to keep hard powering off (cutting it off) if the NOOK name displayed too long, (where I knew it was going to boot Nook OS) It booted to CWM, I did a backup, then installed the zips (had to put on internal memory as you said, but even this wasn't easy, It gave some weird error I don't recall,maybe about something "has stopped", so I ended up having to copy it from ES File Explorer after booting to Nook OS) Then I repeated the boot trick as mentioned, backed it up, then installed the 2 zips. I rebooted, got walkthrough of 1st time setup. This is where it got weird. Screens would advance on their own, be shifted halfway off the screen, had a long delay or else wouldn't respond to my clicks, would power off (and wouldn't power on until MANY presses of the power button) or reboot on it's own during the setup. I finally got thru setup and then after booting to Android, it would still be very sluggish, and still powering off on it's own and being difficult to turn on. And it continued to be unreliable to boot to Android, sometimes booting to Nook OS still (even though some in forums say once they got it to boot to Android it would forever after.)
Maybe I need to try a different build. Who else has a well-known, reliable? build besides Succulent? (even though with his it wouldn't boot to CWM but hang at 99% forever on Nook OS loading). If there's no others, maybe I'll give his another try since I had some luck getting CWM to boot with the above trick.

baytee said:
...
This is where it got weird. Screens would advance on their own, be shifted halfway off the screen, had a long delay or else wouldn't respond to my clicks, would power off (and wouldn't power on until MANY presses of the power button) or reboot on it's own during the setup. I finally got thru setup and then after booting to Android, it would still be very sluggish, and still powering off on it's own and being difficult to turn on. And it continued to be unreliable to boot to Android, sometimes booting to Nook OS still (even though some in forums say once they got it to boot to Android it would forever after.)
Click to expand...
Click to collapse
What brand and class of SD card are you using to run CM?
...
even though with his it wouldn't boot to CWM but hang at 99% forever on Nook OS loading
...
Click to expand...
Click to collapse
FWIW, every time that I have had the problem of stock ROM boot-up stuck at 99% it was always because the stock ROM got corrupted due to some unexpected errors in the creation/update of the SD-based CM ROM image, and the only way I was able to recover was to restore stock ROM from backup copy.

I have a PNY 16gb class4 (C16G china 1308PW3599P)
The problem of it hanging at 99% only happened with Succulents, not Bokbokans. As far as the Nook OS being corrupt , I have doubts of that since without the SDcard it ALWAYS boots fine to the nook OS.

baytee said:
I have a PNY 16gb class4 (C16G china 1308PW3599P)
The problem of it hanging at 99% only happened with Succulents, not Bokbokans. As far as the Nook OS being corrupt , I have doubts of that since without the SDcard it ALWAYS boots fine to the nook OS.
Click to expand...
Click to collapse
The problem of stock booting to 99% and hanging with an SD inserted has to do with the properties of the SD, not corruption of stock. Stock will always hang if the SD has more than 3 partitions. Most of Bokbokan's SDs are set up to only have 3 just for that reason. I don't know how many the succulent SD has, I would bet more than 3.
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
...
Stock will always hang if the SD has more than 3 partitions. Most of Bokbokan's SDs are set up to only have 3 just for that reason. I don't know how many the succulent SD has, I would bet more than 3.
Click to expand...
Click to collapse
Succulent's CM SD image for the HD+ only has 3 partitions.

I WAS creating a 4th partition & was unaware it was an issue so thanks. I was doing customized partition (not using their premade sd image). But my whole goal is booting to sdcard, not to nook os.....and the 99% Id assumed was after it failed to boot to sdcard & instead had gone on to boot nook os. But Just in case it helps me boot CM11 on sdcard, I'll try it with 3. Thanks for that tip.

actually I WAS creating a 4th partition & was unaware it was an issue so thanks. I was doing customized partitions (not using their premade sd image). But my whole goal is booting to sdcard, not to nook os.....and the 99% Id assumed was after it failed to boot to sdcard & instead had gone on to boot nook os. But just in case it helps me boot CM11 on sdcard, I'll try it with 3. Thanks for that tip

baytee said:
actually I WAS creating a 4th partition & was unaware it was an issue so thanks.
Click to expand...
Click to collapse
FWIW, I took succulent's pre-made SD image for CM11 (https://goo.im/devs/succulent/ovation/cyanogenmod/image/cm_ovation_11.0_24DEC2013_HD_SDC_IMG.7z), burned it to a (Sandisk class 4) 8GB SD card. The image has 3 partitions which succulent had sized to fit a 2GB SD card; I added a 4th partition (type: FAT32, name: /media) to fill the leftover space of my 8GB card (and reset the boot (1st) partition's type/flag to ensure that it's still bootable). The resulted CM11 card with the extra 4th partition booted up just fine on my HD+.
So, having an extra 4th partition (or, in general, more than 3 partitions) does not prevent a SD-based CM image for the HD+ from booting successfully -- just as one by virtue of logics would have expected.

digixmax said:
FWIW, I took succulent's pre-made SD image for CM11 (https://goo.im/devs/succulent/ovation/cyanogenmod/image/cm_ovation_11.0_24DEC2013_HD_SDC_IMG.7z), burned it to a (Sandisk class 4) 8GB SD card. The image has 3 partitions which succulent had sized to fit a 2GB SD card; I added a 4th partition (type: FAT32, name: /media) to fill the leftover space of my 8GB card (and reset the boot (1st) partition's type/flag to ensure that it's still bootable). The resulted CM11 card with the extra 4th partition booted up just fine on my HD+.
So, having an extra 4th partition (or, in general, more than 3 partitions) does not prevent a SD-based CM image for the HD+ from booting successfully -- just as one by virtue of logics would have expected.
Click to expand...
Click to collapse
No it does not prevent it from booting to the SD, but it does prevent stock from booting successfully if the SD is inserted in the slot. It will hang at 99%.
Sent from my BN NookHD+ using XDA Premium HD app

Verygreen's CM 11 SD build of 11/29/2014 for the HD+ works very well for me. First boot does take awhile so don't give up too fast.
Sent from my BN NookHD+ using Tapatalk

Related

Question on verygreen's [ROM][CM7] Size-agnostic SD Card image and CM7 installer

I'm a noob with not enough privilages to post over in the developer's forum, so posting here.
I've successfully imaged and booted to CM7 using verygreen's project:
http://forum.xda-developers.com/showthread.php?t=1000957
Next step was to try adding/installing gapps and using recover. I've tried a few different times doing a few different things, but all end up rebooting (with SD in the NC) to the original boot of the NC, as if out of the box. I get the hand going over to the android and having to "Set Language" and wifi.
Not sure what I'm doing wrong and it looks like others got it to work.
Any help?
Have you actually booted into CM7? The nook boots first to the SD card, so if you can't boot now into CM7 that means that something has changed on the SD card. In other words, on boot the nook looks for something useful (like a bootable OS) on the card and if it can't find it boots to internal (original B&N OS).
So, do a normal power up and see if you boot into CM7 on the sd card. If so, see below about booting in recovery (once you've added the google files). If not, something's amiss with the image on the card.
YOu may be having a problem booting into recovery -- this is pretty common. It can be tricky timing the release of the buttons. Follow the directions on verygreen's post carefully. Push the N button first, then power, count off about 6 seconds and make sure that you see the message before releasing. Took me a few tries to get the recovery screen instead of booting normally.
I can tell you that I've done this a few times and it does indeed work. The only tricky part is timing to button thing when booting into recovery.
Yep, I did boot into CM7... The wallpaper changed and there were new icons, of which I can't remember at the moment.
I know what you are saying about entering recovery mode... I think I got that set. I can see when entering recovery mode, as the penquin icon is shown and then all the messages come up, including expanding the zip files.
My problem is getting the gapps included. I've tried just copying over the gapps zip file and do recovery with that. I've tried copying both the CM7 nightly and the gapps zips and do recovery. I also noticed the instructions:
•Get u-boot.zip file from attachment in this post: http://forum.xda-developers.com/show...&postcount=153
•Unpack the u-boot.bin file and put it onto parttion 1 of the SD card instead of the one there.
•Rename file named uRecImage on the first partition to uRecImg (doh!)
•Get this uRamdisk file, rename it to uRecRam and then put the result to the 1st partition on the uSD card instead of the file with the same name there
I've also done that... still boots to as if it is a brand new, out of the box Nook. I take it that means the SD is messed up. So I'm doing something wrong in how to get the gapps on.
Sounds like the easiest way for you is to start over.
Re-image your card with verygreen's 1.1 from the beginning of his post.
Then download the version of CM7 you want (verygreen's or rc4 or whatever)
add this .zip to the sd card, download gapps and also add this to the sd card.
Insert into nook and boot.
You have to put these zips on the sd card BEFORE you boot into CM7 the first time. This is why you have to re-image.
This is what I did and everything worked great. Skip the gapps login until you have wifi setup of course and everything should be fine.
Yup, sounds like danbutter has it right. I know how frustrating this is, but it really is worth it.
You may have problems prepping your SD card to re-image because of partitioning. One way to start with a really clean slate is to download Paragon Partition Manager (the free addition) and totally wipe all the existing partitions. Windows disk manager won't do it.
robedney said:
You may have problems prepping your SD card to re-image because of partitioning. One way to start with a really clean slate is to download Paragon Partition Manager (the free addition) and totally wipe all the existing partitions. Windows disk manager won't do it.
Click to expand...
Click to collapse
I don't know exactly what it is with this, but I have never had this issue and I have re flashed a couple sd cards many many times playing with this and all I have ever done was select the new image and write it to the card.
Is this something to do with certain card readers or what?
I'm using a five year old HP laptop and its built in card reader.
Just curious

[USER][TIPS]Nook Color User Tips for CM7/CM9/CM10/CM10.1 From LeapinLar

At the request of a user I am creating this thread to consolidate my tips for the Nook Color that are spread out over several other threads. Check back occasionally as I may add more tips to this post. (Note: This tip post got so large that I had to split it into two posts so that XDA would let me post changes. See the next post in this tread for the continuation.) See the change log in my second post.
Most of these were developed for CyanogenMod versions 7, 9, and 10, but some may work on other ROMs. These tips are in no particular order, except that general tips are in section A and SD tips are in section B.
I know this is a long post (I have been accused by one user of being 'long-winded'), but you do not have to read all of it (unless you want to). Just scan the headings and read those that apply to your issue. I think the most useful tips for users having problems are A8, A9, A10, A11 and A12. For SD users it is item B2, which points to the latest SD image file.
A. GENERAL TIPS THAT WORK ON CM7, CM9, or CM10
A 1. Put some settings in /data to avoid losing them in a ROM flash
Many things can be added to the /data directory to customize how CM operates. By adding the things there, they survive a flash of a new ROM since new ROM flashing usually only effects /system.
You can create a new text file named local.prop and put it into /data. That file can contain anything that normally can be put into build.prop in /system. It is loaded after the build.prop file is loaded so in some cases it can override settings in build.prop.
You can create a new folder in /data/local named userinit.d. In that folder you can place script files that you want to run at boot time. An example of a script that works is the script to make the SD boot partition show up on your system for SD installed CM. That is described later.
You can put a custom boot animation in /data/local and it will override any boot animation that is included with your ROM in /system.
You can set some system properties by putting entries in a folder named /data/property. For example, if you want to skip the boot animation at boot time, create a text file named persist.sys.nobootanimation and place the value 1 in it. Then the animation is turned off. If you want to re-enable it, change the value to 0.
In some of these files it is important to set the permissions correctly in order for them to work. For example, any scripts in the userinit.d folder must have their permission set to execute or they will not execute at boot time.
A 2. Dalvik Cache, what it is, how it works.
Dalvik cache is a method that android uses to speed up operations. There are two dalvik caches. One in /cache (for system apps) and one in /data (for installed apps). Clearing dalvik cache with recovery clears both. Clearing /cache will clear the dalvik cache in /cache but not the one in /data.
In flashing new ROMs, the only one really needing clearing is the one in /cache since only new system apps are installed in a ROM flash. Also only clearing the one in /cache makes it boot faster since the nook does not need to rebuild the one in /data for your installed apps which have not changed.
I have described how the cache works and a tip on how to speed up booting for SD installs here. The tip is repeated in section B3 in the second post of this thread.
A 3. Wiping in preparation of a new ROM flash.
Ordinarily if you are moving from one nightly to another nightly of the same rom, just wipe dalvik cache with Clockworkmod (CWM) Recovery.
If you are moving from one type of rom to another, it is best to do a "wipe data/factory reset". A factory reset wipes /data, /cache and clears any apps you installed to SD. The rest of your media data on emmc or SD is left intact. Since a factory reset clears both /data and /cache, there is no need to separately clear /cache or dalvik-cache. A factory reset means you will lose all settings and installed apps. So, before you do a factory reset, you may want to backup your apps with a program like Titanium Backup so you can restore them later without re-installing. If you have one of the newer Nook Colors with the new partition layout, you need to have version 3.2.0.1 or newer of CWM or the factory reset will not complete properly.
The new rom automatically wipes /system as part of the installation, so you should not have to ordinarily wipe that.
Never wipe /boot. It will remove your stock or CWM recovery and you may end up in a bootloop. Or worse yet, since it removes the boot files, it will not turn on at all unless there is a bootable SD in the SD slot.
When flashing a stock ROM, I have found that for some reason CWM does not wipe clean enough and the new ROM stalls. I have found that I have to flash my format partitions 5, 6, and 7 zip as described in my item A15 below. In fact, anytime you are switching from one kind of ROM to another it might be a good idea to use that zip first.
A 4. Freeze/Block applications
There may be times when you want system installed apps to be removed from your system. Do not just delete them from /system. You may find later that you want them back and also deleting them may cause your system to lock up. You can use third party apps like Titanium Backup Pro (not free) or Gemini Application Manager (free) to freeze/block the apps you don't want. These apps change an entry in a system database that tells the system to ignore those apps. They will not be loaded into memory or listed in your app drawer. With these third party apps you can do this to any app. For CM9/CM10 you can do the same thing for system apps in Settings/Apps. Just open the system app and select disable. You can always enable it later. But this only works for system apps.
A 5. Sleep of Death (SOD) on CM7 and CM9
SOD has been a problem with CM for a long time. If you leave your wifi set to stay on all the time and the device goes into deep sleep, it sometimes will not wake back up. There is apparently some interaction between waking up and wifi that locks it up. The device is on but you cannot get the screen to come back on. The only way to get out of it once it is locked is to hard power off by holding the power button for like 15 seconds and then releasing the power button and pressing again to power back on. For CM7 the work around is a modified wifi kernel module (twlan_drv.ko) in /system/lib/modules. (Get it here). The devs have built in the mods to the CM9 kernel so the revised module is not necessary in CM9.
A 6. ADB on CM9/CM10
For some reason that I do not understand, the device id (which is normally 2080:0002) is changed for CM9/CM10 in Windows. That means the adb composite drivers do not install properly and adb does not work. When you turn on USB debugging and plug your USB cable to your PC, Windows says it is looking for MTP drivers, but is really looking for adb drivers. I have explained how to fix that here.
A 7. Soft Navigation Keys in CM9 in Phone GUI
In both CM7 and standard CM9 the status bar is at the bottom of the screen and has soft navigation keys built in. In CM7 when you change screen density to a higher value, the status bar does not change. However in CM9, when you change density higher than the standard 160 dpi, the GUI switches to the phone mode and puts the status bar at the top like a normal android phone. The downside is that the soft navigation keys normally displayed on the bottom of the screen are suppressed. To get them activated just add a couple of lines to your properties file. See my post here.
A 8. Recovery bootloops
There is sometimes a mysterious bootloop issue where no matter what a user does, the Nook bootloops on booting. This is usually caused by a corrupt or missing recovery itself or by missing or corrupt files in partition 2 (/rom). No matter what the user chooses in the boot menu, it tries to find a working recovery to boot to. If it finds one, it boots to it. If it cannot find a working one, it boots to a blank screen or just a stuck "loading". Even if you put one of the older bootable CWM SDs in the slot, it still gets stuck since those older CWM SDs do not contain normal recovery files, just special bootable files.
There is a flag file in the /rom partition that tells the Nook to boot into recovery. ROM Manager uses that flag file to tell the system to boot to recovery when the user selects that option. And it tries to boot there no matter what the user tells it to do in the boot menu. After it successfully boots into recovery, recovery resets that flag file as it exits normally with the menu choice. So next time it boots it boots normally.
Sometimes that flag never gets reset, usually because there is no working recovery to reset it. So it continues to try to boot to recovery.
And sometimes it could be a missing or corrupted file on your /rom partition. In a folder in /rom (/devconf), several device specific information files are stored. One of those files (DeviceID), is critical to your device booting to a rom. If it is missing or corrupted the Nook will always try to boot to recovery so that it can repair itself. See my description of this problem in item A12 below.
If you boot to a blank screen or a stuck "loading" no matter which option you choose, it usually means a corrupt or missing recovery. If you boot to recovery repeatedly no matter which option you choose, it usually means a corrupted /rom partition.
To fix a corrupted or missing recovery on emmc, use my new CWM recovery SD I have detailed in my item A10 below. This SD has been modified to include the normal recovery files in addition to the special bootable CWM files there so that it can boot into recovery in this kind of failure. Just prepare the SD as described in item A10 below and turn off the Nook and insert the SD. Boot and the new CWM should appear. Sometimes just exiting that CWM immediately with the menu choice will get you out of the loop so you can boot to your ROM. But you probably still need to put a good recovery on emmc. Flash one of the stock recovery versions I have attached to this post below, or the new version of CWM (5.5.0.4) for emmc by Racks, also attached below (thanks Racks for the CWM). I recommend that you flash my stock recovery with CWM 5.5.0.4 as alternate version. That will put stock recovery as the normal recovery and the new CWM as an alternate recovery. That way if the nook decides it needs to repair partition 2, it can (see item A12 below for a description of that). And you can still get to CWM by booting to the alternate choice with the boot menu or holding volume up/down while booting. (The only downside I can think of using this zip is ROM Manager can no longer be used to flash things, it needs CWM as the normal recovery.)
You should probably save the CWM bootable SD for future use. You can use it to nandroid backup to the emmc media partition, factory reset and flash new ROMs to emmc as well as getting out of future bootloops.
To fix the issue of a corrupted /rom partition, go to my partition repair thread here or use the romrestore utility attached to this post. See item A12 for a description of romrestore.
For those interested in the details, the recovery flag file is named BCB and is in the /rom partition (P2). It is not what is contained in the file that makes a difference, it is the file size. If the file is 512 bytes or larger, the Nook will boot normally. If the file is less than 512 bytes or is MISSING or unreadable, it boots to recovery. And the DeviceID file in /rom/devconf is a 17 byte text file containing your 16 digit serial number followed by a linefeed.
A 9. Bootable SD Cards
An SD card must be formatted in a very specific way before the Nook Color will boot from the SD. The first partition must begin exactly on the 63rd sector of the card and the flags properly set.
It is very difficult using normal formatting programs and partition managers to make that happen. That is why devs include burnable images to burn to the cards if they are to be bootable. Examples include eyeballer's bootable CWM card, verygreen's SD installer card, racks' dual boot SD card and my new bootable CWM version 5.5.0.4 in item A10 below. They have the images all set up so that when burned properly the first partition is configured so it can boot.
But even when using these images they do not always work if they are not burned to the card properly. The cards may be readable in the PC, but do not always boot in the Nook. In Windows, most devs recommend using winimage or win32diskimager (here, it's free) run in administrator mode. Also if using winimage, do not select "write disk", select "Restore Virtual Disk Image to physical drive". In Linux or OSX, use the "dd" command. And they recommend using an external USB reader rather than any built in readers in the PC. Sometimes it is just the card you are using causing the problem. And sometimes you can get them to boot if you plug your stock USB cable and powered off Nook into your PC. Wait a few seconds and it might boot.
Don't give up, keep trying. It eventually should work if you have the SD prepared properly.
A 10. New Bootable CWM Recovery SD (v5.5.0.4 and now v6.0.1.2)
I have created a new bootable CWM SD and attached a zip of the image to this post (CWM-5.5.0.4-bootable_SD.zip). It is version 5.5.0.4 and is to be used for flashing/wiping/backing up emmc. To create the SD just unzip the image file and burn it to your SD with win32diskimager (here, it's free). Since it is only 200MB it can be put on a very small SD. Also since it is so small there is no room to make backups there. However, this version of CWM will let you backup to internal (emmc) media storage. But there should be plenty of room to put flashable zips on the SD. If you want the partition larger, after burning just use a partitioning program like Mini-Tool Partition Manager to expand it. This version of the bootable SD uses the new Cyanoboot bootloader, so just let it go and it will automatically boot to CWM. When finished using CWM, be sure to exit using the menu choice so that the recovery flag is reset. When you have exited, either keep the SD for future use or reformat it to use for other purposes. Thanks to Racks for the 5.5.0.4 CWM.
This CWM SD can be used for getting out of some recovery flag bootloops as described in item A8 above.
Just added v6.0.1.2 with a little larger partition (300MB). This version should be used if you want to flash the stock ROM from item A15 below. Otherwise, use either version.
For those users that do not want to use CWM, I have make a bootable SD that has an older version of TWRP here. Newer versions of TWRP will return an error message trying to flash my older zips. The image has also been modified to get you out of some bootloops.
A 11. EMMC partition repair
Several users have complained that they get blank screens and cannot flash new roms to their Nook Color. And sometimes they end up in a recovery bootloop where it will do nothing but boot to recovery no matter what they choose in the boot menu. Sometimes this is due to corrupted partitions.
I have developed some tools to help users repair corrupted partitions on emmc. See my thread here.
A 12. B&N stock automatic repairs (Factory reset to stock via 8 failed boots and automatic partition 2 (/rom) repair)
B&N built in two automatic repair utilities for Nook Color systems that were malfunctioning. First, it has a fail safe system that allows it to repair itself if the user was unable to get it to boot 8 times in a row. Second, it has an automatic partition 2 (/rom) repair utility (romrestore).
But both of these repair functions are only available if you still have the stock recovery on emmc. If the user has replaced that recovery with CWM (or TWRP) recovery they will not work. It is OK if CM has been installed on emmc, it is only a problem if CWM was also installed there wiping out the stock recovery. But I have a solution for that. I have attached a zip to this post that will re-install the stock recovery replacing CWM on emmc. And I just added the partition 2 repair zip to it. Now both stock repairs will work. Just flash the zip with CWM recovery (either from emmc or a bootable CWM SD card). I also added a version that will put stock as the normal recovery and CWM 5.5.0.4 as the alternate recovery. Just select it with the boot menu if you want to use it.
Stock recovery looks very different than CWM. If you boot into it (either using power/n keys during boot or the boot menu choice in cyanogen bootloader), a dialog box pops up asking if you want to do a factory reset to wipe all the data on the device. If you say yes it will wipe /data, /cache, and the media partition. If you say no it will reboot.
8 failed boot reset. An image of the system as it came from the factory is stored on one of the partitions (p3). After the 8 failed boots, the stock recovery software is automatically started and wipes all data (including emmc media storage) and restores the system files to original.
This is really handy for rooted stock users who want to either sell the system or return it to B&N. And it is useful if somehow the user cannot get the system to boot to a bootable SD and they want to start over with the stock ROM.
The procedure to follow if you still have stock recovery on emmc is:
(Paraphrased from a post by Harrybub)
Start with the Nook completely powered off.
Press and hold the power button, the volume up button, and the n button until you see the screen flash. (I have found the best way to do this difficult maneuver is to press n with the thumb of one hand and the power and volume up with the thumb and forefinger of the other hand, griping the top of the device.)
Release all buttons for one second then press and hold only the power button for several seconds until the Nook powers down. (Backlight off) This works best in dim lighting.
Do this again for a total of 8 times in a row.
The last time a screen will come up saying it is clearing your data and installing the factory image (which is stored as factory.zip on partition 3). You will be back to what it was when it came out of the box.
If you mess up the timing and it starts to boot up you will have to power it down again and start over at count one.
Click to expand...
Click to collapse
Of course if you can still flash things using CWM, it is probably easier to just flash a stock zip than to do the 8 failed boot procedure. But I wanted users to understand the process in case it was their only option. See item A15 below for flashing stock ROMs with CWM.
Automatic partition 2 repair utility. This repair utility will automatically repair partition 2 (/rom) if it thinks it is necessary. In partition 2 is a folder (/devconf) that holds vital system configuration files that the Nook needs like serial numbers and boot counts to help it decide to do the 8 failed boots described above. Every time the Nook boots, it checks the integrity of that folder and if it thinks it needs repair, it tries to repair it.
The test that it uses is it looks for a specific file in devconf named DeviceID. It is a text file that contains your 16 digit serial number followed by a linefeed (17 bytes total). On boot, if the that file is corrupted or missing, stock recovery is automatically invoked and runs a zip file named romrestore.zip that is in /boot. That zip looks in partition 3 (/factory) for a file named rombackup.zip. That file is a backup of your devconf folder from partition 2 that was made at system manufacture. If the backup file is found, the repair zip first formats partition 2 and then copies those backed up files from partition 3 back to your partition 2. It then continues the boot process booting to the installed ROM.
Partition 2 repair bootloop. This last repair utility is how some recovery bootloops happen. The user replaces the stock recovery with CWM recovery as part of putting a new ROM on emmc. Then when the system boots, it checks for integrity of partition 2 and if it thinks it needs repair, it tries to boot to stock recovery to do the repair. But stock recovery is no longer there. So it boots to CWM recovery and does nothing. No matter what the user does, it keeps trying to find stock recovery. Hence a bootloop.
There are three ways to get out of this loop.
You can flash a new stock rom on emmc. It will reinstall the stock recovery and repair zip as part of the installation. Then it can find that stock recovery on boot and repair itself. But you have to use a stock zip file that has been modified so that CWM can flash it. See my item A15 below for a link to a version of stock 1.4.3 that has been modified to be CWM flashable.
Or you could flash my stock recovery zip mentioned above. I just modified it to include the repair zip. In fact, you might want to flash my stock recovery zip that has CWM as an alternate recovery. I have included the CM bootloader with it so that you can use the boot menu to get to the alternate CWM. By using the stock recovery as normal recovery, the Nook can repair partition 2 any time it thinks it is necessary. And it is ready any time someone wants to use the 8 failed boot procedure.
Or you can flash one of my versions of the partition 2 repair utility. I have two. Romrestore (CWM flashable) is attached to this post. This romrestore zip is the stock version modified so it is flashable with CWM. It does not recreate the partition, it just repairs the files there. The other version is in my EMMC partition repair thread here and actually recreates the partition before it repairs the files. Once either of these are flashed successfully, and the Nook boots, the system should not find any errors in partition 2 and it should boot normally.
A 13. Nook Color Charging/Battery
The Nook Color charging adapter and cable have been custom made for charging the Nook. First the charging block has the data pins (d+/d-) shorted. Second the charging/USB cable has a special connector on the Nook Color end of the cable. It sort of looks like a standard microUSB connector but it is not. It has been elongated to add a second row of pins behind of the standard microUSB pins. Those extra pins mate with similar extra pins in the connector inside the Nook Color. Among other things, those extra pins give the cable more charging capacity. (For those interested, the pinout has been recently traced by a user and documented here.)
The charging circuitry inside the Nook Color looks for those conditions of the charging block (shorted d+/d-) and the extra pins in the connector. If it finds both of those conditions it allows for full charging capacity of the Nook Color (about 1.9A). The Nook Color will charge quite rapidly at that current. However if it does not find both of those conditions, it will think it is connected to a USB port and limit charging current accordingly (about .5A). This can take a while to fully charge the Nook Color (especially if the screen is on at the same time.) The charging circuitry does this for all ROMs. (Edit: There is also a third possibility. If you use a shorted d+/d- charger and a standard microSD cable it will charge at about half rate (about 1A). Thanks bobtidey for that tip.)
It is possible to use third party charging blocks with the data pins shorted along with the stock cable and you can still get full charging capacity.
But standard microUSB cables work great for data transfer between the Nook Color and your PC. And they can be used for limited charging with the USB port of your PC. Your PC usually limits that to .5A anyway.
Using the stock cable frequently sometimes leads to cable failure issues since the stock cable is so fragile. I got one replaced under warranty by B&N. But I finally bought a spare B&N power charging kit at Office Depot for $25. It included the charging adapter and cable. I have since found that the B&N kits are available online by many vendors. I have seen them as low as $12.95. Do a search for ADP-H01 and you will see many.
Several users have complained of battery problems. Their percentage varies all over the place and the device shuts down unexpectedly. My advise usually is to try a wipe battery stats from CWM. There is a lot of controversy in the community whether that really does anything useful. A few "experts" have said it does nothing and is only a placebo. And it has been removed from newer versions of CWM and TWRP. Another thing to try is to delete the max17042.bin file from /rom. Don't worry, it will get rebuilt on the next boot.
One of the users on this forum (catawalks) ran across an article about use and care of lithium ion batteries. There is a lot of good advice there that is not common knowledge. The user learned that how he was treating his battery was almost guaranteed to make it fail. (He was leaving it discharged for long periods of time then recharging fully and storing again.) You can read the article here (thanks catawalks for the link).
For those having an unusual battery drain while the unit is sleeping and want to find out what is causing it, get BetterBatteryStats here. This app is free if obtained here on XDA but costs on the Play Store. It tracks what are called "wakelocks". Those are applied when specific applications want to keep the Nook awake while it performs tasks in the background. They bring the system temporarily out of deep sleep. Of course your system uses more battery while this happens. Look at the wakelock information this app displays to get an idea what is keeping your Nook awake.
A 14. Skip Oobe (Out-of-Box Experience) for stock Nook Colors
If people are having trouble registering their stock Nook Colors, mateorod discovered a documented procedure where you can skip the registration step including setting up wifi. Just go here and follow the instructions. It even explains how to factory reset so that all data is wiped from the device. Thanks mateorod!
A 15. Flashing stock ROMs with CWM
Ordinarily stock ROM zips downloaded from B&N cannot be flashed to emmc with CWM. You must use the stock recovery to flash them. However, the zip can be modified to make it flashable with CWM. You can get a stock version 1.4.3 zip that I have modified to be flashable with CWM here or DizzyDen's older 1.4.1 stock zips here. The zip files are so large that it is best to use either the 6.0.1.2 CWM or the 2.1.8 TWRP bootable SDs from item A10 above. If you are coming from a CM ROM, I have found that I first need to format my partitions with the format 5-6-7 zip (formats /system, /data and /cache) that I attached to this post. If I just did a wipe with CWM, the stock rom would hang on boot for some reason. (And if you are interested in putting the stock ROM on SD, I have instructions in section B below).
A 16. Swapping Internal and External Media Storage
In CM7 there used to be a setting that would allow users to swap internal and external SDs. This was useful for users that had no external SDs and wanted their apps to use internal memory as SDCARD. Starting with CM9, CM changed it so the setting was no longer in settings, but was moved to the CMParts app. And now the CMParts app has been removed. But users can make manual modifications to activate the swap.
There are two ways to do it. One is to edit /system/build.prop to add this line:
persist.sys.vold.switchexternal=1
The second way is to add a property file to /data/property. That way it sticks with a ROM upgrade. Add this file:
persist.sys.vold.switchexternal
And insert the value 1 (with no carriage return) in the file.
After making one of these edits, just reboot and they should be swapped. To return to normal just change the 1 to 0 and reboot again.
But there is a problem with some early versions of CM10.1 and CM10.2 that prevents this from working properly. It has been fixed in the current builds. But if you are running an older version, you can fix it yourself by editing this line:
ro.vold.switchablepair=/mnt/emmc,/mnt/sdcard
to
ro.vold.switchablepair=/storage/sdcard0,/storage/sdcard1
-----
Go to my next post in this thread for Section B. TIPS THAT APPLY TO THE VERYGREEN SD INSTALL OF CM.
Click to expand...
Click to collapse
-----
If you have questions or comments just respond to the thread.
Change Log and SD Tips
CHANGE LOG
09/22/13 - Added A 16 Swapping Internal and External Media Storage
11/23/12 - Added description in B1 on how to use my SD formatting zips
11/02/12 - Added 1.4.3 Stock ROM modified for verygreen SD installation (B11)
10/29/12 - Added verygreen SD formatting zips to the attachments in post two
10/26/12 - Retitled section B3 "Dual Booting" and added more information
10/23/12 - Updated Alternate CWM for SDs to v6.0.1.2 in item B5 and added a v6.0.1.2 bootable SD to item A10 and attached them both.
10/20/12 - Added information about not powering up after a wiped /boot partition to section A3
10/17/12 - Added link to updated SD installation instructions to section B2 and updated the SD installation image to Rev 5 to fix a CM10 issue
09/16/12 - Split out 'Flashing stock ROMs with CWM' to it's own item A15
08/21/12 - The verygreen SD installation image was updated to Rev 4 to accommodate JB zips and larger /data partitions in section B2
08/10/12 - Added a corrected version of the Alternate CWM for SD installs to section B5
08/09/12 - Added BetterBatteryStats link to section A13 and link to Taosaur's simplified SD installation guide to section B1
08/04/12 - Edited section A8 to clean up and include the latest information about recovery bootloops
08/03/12 - Added a modified version of the stock romrestore utility
07/30/12 - Added description of stock automatic partition 2 repair utility (romrestore) to section A12
07/28/12 - Added Skip Oobe (Out-of-Box Experience) for stock Nook Colors to section A
07/24/12 - Added Nook Color Charging to section A
07/11/12 - Added Factory reset with 8 failed boots to section A
07/08/12 - Added Emmc partition repair to section A, split tips into two posts
06/26/12 - Added How the verygreen SD works to section B
06/16/12 - Updated 'SDboot" to Rev 2 to make it easier to use Goo Manager with verygreen SD installs
06/13/12 - Released Rev 3 of the verygreen image for installing CM to SD, correcting an error introduced in Rev 2
06/10/12 - Described how to get out of some recovery flag bootloops (item A8)
06/03/12 - Added CWM 5.5.0.4 bootable SD
06/01/12 - Added Bootable SD cards
05/28/12 - Softkey patch no longer needed
05/18/12 - Added info about customizing navigation bar in phone gui mode.
05/14/12 - Added Recovery Flag bootloops
05/13/12 - Added warning about needing to use new CWM with newer Nook Colors
05/09/12 - Edited Revised SD Image for CM9 to indicate new script prepared
05/02/12 - Added Verygreen SD vs. Racks dual boot SD
04/30/12 - Added NookColorUMS for CM7 and CM9
04/27/12 - Added Using ROM Manager with SD installs
-----
B. TIPS THAT APPLY TO THE VERYGREEN SD INSTALL OF CM
B 1. Installation of CM on SD vs EMMC
How CM is installed for verygreen SDs is significantly different than for installing to internal memory (emmc).
Emmc (Embedded MultiMedia Card) installs are controlled by an installation script built into the zip itself. The zips are hard coded to install to specific partitions on emmc. CWM recovery is used to install to emmc and CWM turns over installation of the zip to that script built into the zip.
For verygreen SD installs there is no CWM recovery, just verygreen's script built into the boot partition. A properly named install zip (update-... cm-.... diff_... or gapps...) must be copied to the boot partition. Installation is controlled by his special script. It takes over installation of the zip, mostly ignoring the script built into the zip itself. It does not backup gapps or format /system. It just copies the new system files over the top of the existing files. Therefore if gapp or other files not in the zip were already there, they are still there and not modified.
Since the script installer does not format anything before installing a new ROM, sometimes it is a good idea to clear things out first. Or maybe your installation is acting up and you want to start fresh without formatting the whole card and losing your media files. You could use the modified Alternate CWM for SD (see item B5 below) to do it, but not everyone has installed that on their SD. So I have prepared and attached some zips as an alternate (and I think cleaner) way to wipe your SD partitions. They can be flashed with any recovery (on emmc or SD) since they are hard coded to format those partitions on SD that are named in the zip title. They have safety checks built in to make sure that you have your partitioned verygreen SD in the slot before they will attempt to format anything. If you are just installing a fresh nightly and you want to keep your data, just wipe system and cache (but that means you need to re-install gapps too). If you are having operational problems and want to keep the same ROM, just wipe data and cache. Or if you are putting on a completely different ROM, wipe system, data and cache.
If you do somehow get into CWM recovery on emmc, be warned that most things you do with it (like flashing or wiping) will happen to emmc, not the SD (except for those zips I just mentioned above). And if you are using older versions of CWM, it will try to place any nandroid backup files to the boot partition of the SD. There is not room there so it will fail. A work around is to use the new CWM recovery (version 5.5.0.4) that allows you to back up to the emmc media partition. Get a flashable zip to install the new CWM to emmc here or attached to the post above. The TWRP recovery also saves backups to internal storage. Get the latest version here. Or you could flash the stock recovery with CWM 5.5.0.4 as Alternate also attached to the post above.
For more information on SD installs, look at my post here.
For those wanting a simplified guide for installing CM7 to SD go Taosaur's excellent blog here. It also works well if you want to install CM9 or CM10 to SD. Just substitute CM9 or CM10 wherever it says CM7. I also have an updated SD installation instruction thread for CM9 and CM10 linked in my signature.
B 2. Revised verygreen SD image file for CM9/CM10
The original image file created by verygreen is an amazing thing. But for CM9/CM10 it has three problems. First, the boot partition is too small to accommodate the larger CM9 install zips. Second there is a problem of duplication of apps included in CM9 and gapps.And third, the naming standard by CM has changed. It no longer begins with update-. That means the existing install script will no longer recognize or install a new nightly when it is copied to the boot partition. Users must rename the file to start with update- if they want the existing install script to work. I have modified the install script to now also install nightlies if they begin with the new standard (cm-). I also added to the script the ability to recognize the new prefix (diff_) that is used by the new Goo Manager program to make an incremental update to an existing ROM. The new script will continue to recognize and install zips beginning with update- to provide backward compatibility. My modified image/script now fixes all these problems. I updated the image to Rev 5 to make it 300MB to accommodate the larger CM10 and JB gapps zips and to make the /data partitions larger for 8 GB and larger SD cards. You can read more about this here. Updated installation instructions for putting CM9/CM10 on SD have been posted along with the latest image here.
B 3. Setting up dual booting on the Nook Color
Dual booting is a really nice feature of the Nook Color. There are three ways that I know of to accomplish dual booting.
a. Leave emmc with one ROM and put one ROM on SD using verygreen's method. This is the scheme I use and recommend for users. This is the one that most of these tips in section B apply to.
b. Leave emmc with one ROM and use a dual boot SD install by Racks where two ROMs are installed on SD. I have discussed that scheme in section B8 below. Actually this scheme is triple booting because there is one ROM on emmc and two on SD.
c. Put two ROMs on emmc. I do not recommend this method as it means having to repartition emmc and that is risky since glitches might happen during set up. Vital information is stored on partition three and you can totally brick your device if you mess that one up and have not made a backup of it. I do have an emmc partition repair thread linked in my signature to help you repair if it messes up. But many users have used this scheme and seem to like it. If you are going to use it follow Taosaur's excellent thread here.
Use the boot menu to select the system you want to run. If you hold the "n" button just after the first tiny screen flash during boot, you will enter the boot menu which allows you to select the system you want to boot.
Below are some specific tips to make your verygreen dual boot work better.
Using the same SD media partition with emmc and the verygreen SD
By default, all ROMs installed on internal memory (stock, CM7, CM9, etc.) always use the first fat partition on your SD as "sdcard". That usually is partition 1. When ROMs are installed to SD using verygreen's method, the default for that ROM is changed to partition 4 of the SD.
If you want ROMs installed on emmc and installed on SD to use the same SD card for storing your media, you need to modify the emmc installed ROM to also use partition 4 of the SD. Go to /etc when booted to emmc and there will be a file named vold.fstab. Open that file in a text editor and look for a line that has 'sdcard auto' in it (without the quotes) and change it to 'sdcard 4' (and for CM10 it will say 'sdcard1 auto'). Save the modified file and reboot. Now both emmc and SD will use the same media partition on SD to save its data. No need to swap SD cards. Use the boot menu to select which system you want to boot up.
For modifying stock emmc you still modify the vold.fstab file but there are two auto's in that line in the file. Change the first one. If you have not rooted your stock, you will need to use one of the flashable zips I have attached below. One zip modifies stock to use partition 4 on the SD for media storage and the other zip returns it to stock settings. Use CWM to flash these zips. If you do not have CWM on emmc, use the bootable CWM SD I have discussed in item A10 above. Be sure to make the CWM SD on a different SD than your ROM is installed on or you will lose everything there. These zips are only to be used on systems that have stock on emmc.
Speeding up booting by modifying the dalvik cache setting.
The verygreen SD installation is set up to share the cache partition with the ROM on emmc. And since normally part of the dalvik cache is stored on the cache partition, every time you boot from one ROM to the other, the system is forced to rebuild the dalvik cache because the system apps are different for each ROM. I have discussed the dalvik cache in section A2 in my first post of this thread. To speed up booting by eliminating this rebuild, make a change to the dalvik configuration. When booted to the SD, create a local.prop file as I discussed in item A1 above and put this line in it:
dalvik.vm.dexopt-data-only=1
This forces the ROM on SD to store the entire dalvik cache on the /data partition. Then when it boots after being on the other ROM, it does not have to be rebuilt.
B 4. Access to the SD boot partition inside CM
One of the annoyances of the SD install was the need to remove the SD and place it in your PC if you wanted to copy a new install zip to the boot partition for installation of a new ROM. I have developed a script that will mount the boot partition in CM so that you can download the new zip directly to the nook and copy it to the boot partition without removing the SD. See my post here to get the script and learn how to use it.
[Edit 6-16-12:] I just added Rev 2 of the script to my original post. This version adds a symlink so that it shows up in the root directory as 'sdboot' as well as under /data/sdboot. This makes it easier to use Goo Manager to download new ROMs. Just change your download directory in Goo Manager to /sdboot/ and it will download the ROM directly to your boot partition. Before you reboot, I would suggest you look in sdboot to be sure it downloaded successfully.
B 5. Using a modified Alternate CWM recovery for SD installs
Usually CWM recovery cannot be used with SD installs because CWM usually modifies emmc, not the SD. But I have modified a CWM recovery (v6.0.1.2) that can be used as an alternate recovery for SD installations. It can be used to modify the SD for everything CWM does EXCEPT FLASHING NEW ROMs to SD. (If you do try to flash a ROM with it, the ROM ends being installed to emmc.) But you can flash other zips (like gapps) as long as it has a generic installer script (and that is almost all install zips except ROM zips and zips that flash new kernels or new recoveries). For flashing new ROMs zips, continue to copy the install zip to the boot partition like you always have and the script in the boot partition will do the installing for you. This CWM will nandroid backup the SD, wipe dalvik-cache or cache, fix permissions, etc.
I am attaching a file to this post (AlternateCWM-SDInstalls-Rev2-v6.0.1.2.rar) which contains the files you need. To install to your SD card, unrar the file and you will have two files, uAltImg and uAltRam. Insert the SD card into your PC and copy those two files to the boot partition. Put the SD card back into the Nook. Installation finished. You can boot to the Alternate CWM for SD by using the boot menu and selecting SD/Alternate or holding the Volume Up/Down keys together while booting. Note that when the CWM is loaded it has "for SD" appended to the title so you can tell it is for the SD install.
B 6. ROM Manager and SD installs
When you install CM to SD, the app ROM Manager (RM) is installed with it. It should not normally be used with the SD install. It generally is geared toward doing what it does to emmc. If you tell it to install a new CWM recovery, it will install it to emmc (but if you want a new CWM recovery on emmc, go ahead and do it). It will find and download ROMs and gapps for you, but if you tell it to install them, it will try to boot into emmc CWM and install the zip to emmc. But it ends up booting into the verygreen SD recovery instead and doing nothing. Then the next time you boot into CWM recovery on emmc, it will finish the install it wanted to do originally (to emmc).
B 7. NookColorUMS for CM7 and CM9/CM10
One of the more useful apps I had for the SD install was NookColorUMS by Samuel Halff. I have a dual boot setup with CM7 on emmc and CM9 on SD. Before I developed the SDboot mount script in item B4 above, I would boot into CM7, run NookColorUMS and I was able to mount my SD boot partition so my PC could see it. That way I could copy the new ROM zip directly from the PC without taking out the SD card. I don't need to do that anymore since I developed the script. But NookColorUMS was still very useful if the ROM download was done on the PC or for looking at any partition on emmc or SD. Or, in my case, after building a new ROM on Ubuntu, I could copy it directly to the Nook's SD boot partition using UMS.
But NookColorUMS would not work on CM9, first because UMS was not enabled on CM9 and later, after the devs added support for UMS, because the lun file locations on CM9 were different than CM7. I started to play with the coding in NookColorUMS and figured out how to patch it to work on CM9. It worked so well I wanted to share it with the community. I contacted Sam and asked for his permission to post my modified app to XDA. He agreed. Thanks Sam!
The app as developed by Sam works perfectly on CM7. The CM9 patched version works very well, but has one quirk. After you go to settings and enable UMS and plug in your USB cable, the "Turn on USB storage" dialog always pops up. If you want to use NookColorUMS you must dismiss that pop-up by hitting the back key. Then you can mount any partition you want with the app. (If you do select that pop-up button, sdcard and emmc are unmounted in CM and mounted in your PC and you must turn off USB Storage in CM to get sdcard and emmc back on CM.) Once you have finished with the PC (with either version of the app), be sure to use the "eject" command in Windows (right click on the drive) to make sure it has finished any writing it may have been doing to the drive. Then you can use NookColorUMS to finish unmounting the drives.
In order for this to work on CM9 you must be running a recent (4/22 or newer) nightly and enable Mass Storage by going to settings, storage, menu, USB computer connection and select 'mass storage'. If that setting is missing or greyed out, your nightly is too old.
I have attached to this post a rar file that contains both the original app for CM7 and my modified app for CM9. The CM9 version also works great on CM10. Install the appropriate version and enjoy.
B 8. Verygreen SD vs. Racks dual boot SD.
These two versions of SD installations are very different. Many people are confused since Racks' new scheme is so popular now. The verygreen install is what I have been describing in the above paragraphs. Racks has prepared a much different setup. He has an image file that has all the partitions already set up to accept two systems on the SD. And he puts a modified version of CWM on his for backing up and flashing new ROMs to them.
How ROMs are installed is very different between the two systems. The verygreen script in the boot partition installs the ROM, correcting the zip install script so that it installs properly on his SD. With Racks' you use his modified CWM to install specially modified ROMs that Racks has prepared. You have to get the ROMs for flashing from his special web site. He has modified each ROM so that the installation script built into the zip puts the ROM on the partitions on his SD. He has the CM7 ROMs configured to go on his system1 and the CM9 ROMs configured to go on his system2. If you by mistake downloaded a CM ROM from somewhere else and try to flash it with his CWM recovery, it will get put on emmc, since all CM zips are configured to do that by default.
(Edit: Racks now has a thread set up where the user can use one of his scripts to modify the standard ROM or gapp files found on other sites so that they install properly on his setup. Look here.)
B 9. How to upgrade your SD installed CM to a larger SD.
You may have installed CM to SD on a relatively small SD and would like to upgrade it to a larger SD without having to lose everything you have set up on the smaller SD. You can do that with disk imaging software. I will give an example of someone who originally installed to an 8GB SD and wanted to upgrade to a 32GB SD. If your sizes are different, just substitute your sizes in the example below.
Get win32diskimager free from the web. Put your 8GB SD in your card reader and open win32diskimager in Windows. Choose the drive that has your SD in it. In the image file box pick a location on your hard drive and give it a name to save the image to. Then click 'read'. It will read the card and create an 8GB image file where you told it to. When it has finished, eject the 8GB card and insert the 32GB card. Select 'write' in win32diskimager and it will burn a clone of the 8GB card to your 32GB card.
Then get the free Mini-Tool Partition Manager software and use it to expand partition 4 on your SD to fill the rest of the empty space.
You should be able to boot that in your Nook just like you did with the 8GB card and all your apps and data will be intact.
(This should also work on Racks' Dual Boot SD. Just expand partition 7 instead of partition 4. I have not tested this though.)
B 10. How the verygreen SD works.
The verygreen image when first burned to the SD makes a single bootable partition on the SD. It is 117MB for the original verygreen image and 300MB in my latest revised image. It contains four files. MLO and u-boot.bin which are bootloader files and uImage and uRamdisk which are the verygreen installation script files.
The first time it is booted, the verygreen script starts with the penguin on the screen and a bunch of scrolling text. It looks at the SD to see if it has been partitioned yet. If it has not, it partitions it into those additional partitions necessary for installing ROMs. In addition to p1 (boot, fat, primary), it creates p2 (system, ext4, primary), p3 (data, ext4, primary) and p4 (sdcard, fat, primary). The sizes of these partitions are determined by the size of the whole SD with the larger sizes being for the largest cards (SDs larger than 16GB). P1 is either 117MB (original verygreen) or 300MB (my updated version). P2 varies between 300MB and 920MB. P3 varies between 500MB and 1,950 MB. And p4 takes up the remainder of the SD. In case you are wondering about the cache partition, the verygreen install uses the existing cache partition on emmc, which it shares with the ROM there.
After partitioning, it looks for a zip to install. If it does not find one, it stops and tells you to put one on the SD. The next time it boots it does the same checking and, since it is now partitioned, it just looks for an installation zip to install. If it finds one, it installs it, dynamically correcting it to install to and use the partitions on the SD, deletes the install zip, then powers off. The first time it installs a ROM, it renames those uImage and uRamdisk verygreen files to uRecImg and uRecRam and they become the verygreen recovery files. And it copies new MLO, u-boot.bin, uImage, and uRamdisk files from the zip. The new MLO and u-boot.bin are updated versions of the bootloader files which has the new boot menu. uImage and uRamdisk become your ROM kernel and ramdisk. These are what normally will load in the future to start the ROM.
So if you look at the boot partition now in the PC, it has six files in it. The new MLO, u-boot.bin, uImage and uRamdisk from the latest installed ROM zip. And it will have uRecImg and uRecRam which are the renamed original script files that are now your SD recovery.
Now, with the disk partitioned and the ROM installed, ordinarily, after the cyanogenmod or Cyanoboot logo comes up, it boots by default to CM via the uImage and uRamdisk files. If you intercede with the boot menu and tell it to boot to SD recovery, it looks for uRecImg and uRecRam and loads the verygreen recovery. The penguin comes up again and the script does it's checking and looks for a zip to install. If it finds one, it installs it and deletes the file when finished and powers off. If it cannot find one, it just powers off.
So anytime you want to install new ROMs, gapps or other zips, just copy those files to the boot partition and boot to SD recovery and the verygreen script will install them and delete the zips when successful. In the original verygreen script, install zips must be named beginning with update- or gapps-. In my newest revised image and script, they can be named beginning with update-, gapps-, cm- or diff_ and the script will recognize and install them.
B 11. Stock 1.4.3 ROM on verygreen SD
I have some good news for a few users. I have successfully modified the 1.4.3 stock B&N ROM zip to be flashable to a verygreen SD. That means you can put CM on emmc and still have your stock ROM available if you want to boot to it. Or you can just put it away for future use. Then you can use another SD to run a different version of CM on SD.
The modified ROM zip must be installed with CWM or TWRP recovery to the SD. Don't use the verygreen boot partition installer. A newer version of TWRP or CWM recovery (newer than 3.2.0.1) must be used. Those older versions require that you have normal SDs in the slot and you will have your verygreen SD there. The newer versions can find the installation zips on internal memory (emmc media). The recovery can be on emmc, bootable SD or Alternate CWM on your verygreen SD. Version 5.5.0.4 for emmc and version 5.5.0.4 and version 6.0.1.2 of a bootable SD are all attached to my post above.
The ROM zip is hard coded to install to the partitioned verygreen SD. I have built in checks in the installer to make sure you have the verygreen SD in the slot and it has been partitioned. It can even have an old CM ROM on it as the installer will format the system and data partitions on the SD in preparation of putting the stock ROM on it. But anything you have on the SDCARD partition (p4) is left intact.
After flashing the stock ROM, you will have to go through B&N registration just like you would if it were installed to emmc. But be warned if someone else previously registered the device with B&N, you can't register it yourself unless the prior owner has de-registered it. The prior user can de-register it by logging into their B&N account on the web and selecting "erase and de-register" for that device under their account settings. B&N tracks the device by serial number and it will display the same serial number as it would on emmc. If you can't or don't want to register with B&N, see my item A14 above for instructions on how to skip registration. It just means you will not be able to buy books or apps from B&N.
After you have successfully registered the software on SD, you can move the SD to another device with a different serial number and it still works. I'm not sure of the long term implications with B&N of doing that. You may run into trouble when ordering new books or software through their store.
And here is even more good news. I was able to modify GMPOWER's Manual Nooter 5.08.20 zip to also work on the verygreen SD. So now you can have rooted stock on SD. I have contacted GMPOWER and he is ok with me posting a link to a server where I have placed the modified zip. Thanks, GMPOWER.
And I have prepared a zip to add the dalingrin OC kernel and apps2SD support to rooted stock on SD. And I added a zip to block updates even if you choose not to root.
So the procedure to get this working is to prepare a verygreen SD using the image file attached to my SD installation instructions thread here (generic-sdcard...). Then boot it at least once with the SD in the Nook so the SD can partition itself. If you have an existing verygreen SD prepared, you can skip these two steps.
Download and copy the zip files linked below to your internal storage (emmc media). Boot to recovery and insert the prepared verygreen SD into the Nook. Find the ROM zip on internal storage and install it. It will automatically get put on the SD. It will first format the system and data partitions on the SD and then install the ROM. Boot to the SD and the new stock ROM should load.
Follow the directions to register with B&N. Once you have registered you can stop there if you are satisfied with plain stock. Let B&N finish uploading their free books to you before you do anything else. This could take several minutes depending on your internet speed. If you decide to stay with unrooted stock, be warned that if B&N decides to automatically update you to a new version in the future, it may mess up whatever you have installed on emmc. Therefore I recommend that you install the Block Updates zip which blocks OTA updates. If you install Manual Nooter you do not have to install Block Updates separately since it is included in Manual Nooter.
To install Block Updates, Manual Nooter or OC/apps2SD support, install the zips to the SD with recovery just like you did the ROM. If you install Manual Nooter, it has gapps and Market with it so you must register them with Google. And you need root if you want to use the OC and apps2SD support, plus you will need a program like SetCPU to adjust the processor.
You can get the modified 1.4.3 B&N stock ROM zip here, the modified Manual Nooter zip here, the modified OC/apps2SD zip here, and the modified Block Updates zip here (all four modified for verygreen SD installation).
B 12. SD Card Quality
There has been a lot of discussion among Nook Color users about quality of SD cards needed to run a ROM. The consensus has been that SanDisk Class 4 cards work the best. (I have also found that the new SanDisk Ultra Class 10 cards work really well too.) The issue is that the card needs fast random small file read/write ability. And other brand cards, even if rated a higher class, do not fair well with this attribute. The symptoms of a bad card are sluggish performance, apps force closing and general lock-ups. There has been a lot of benchmarking of various brand and speed classes in a thread here.
After I burned your modified Verygreen image file I used EaseUS Partition Master to set the partition to whatever size you need. I then copied the CM9 zip and the gapps zip into the boot directory as well as your modified CMW files. Worked great.
A couple of things I've found recently:
1. To make ADB over USB work with the NC on Linux, I needed to run
Code:
mkdir -p ~/.android && echo 0x2080 > ~/.android/adb_usb.ini && adb kill-server && adb devices
(Found at nookdevs)
2. To modify a stock image so you can flash it from CWM and still have CWM on the emmc, you need to modify one file in the zip: META-INF/com/google/android/updater-script
First change line 1 to
Code:
assert(getprop("ro.product.device") == "zoom2" || getprop("ro.build.product") == "zoom2" || getprop("ro.product.overall.name") == "NOOKcolor" || getprop("ro.product.device") == "encore" || getprop("ro.build.product") == "encore") ;
Then from the bottom of the file, delete the lines
Code:
package_extract_file("kernel-recovery", "/boot/uRecImg");
and
Code:
package_extract_file("ramdisk-recovery.img", "/boot/uRecRam");
I found the first edit here; the second I figured out for myself after I missed it the first time and needed to re-install CWM.
Hope this is useful to someone.
Thanks for your many posts all over the forum.
I am a noob, and you've helped. I had a question about your post here.
I see you did this in April. Do newer builds of CM9 automatically fix the naming problem with the nightlies?
As far as I know, I downloaded a January version, and then added a nightly, and I think the nightly installed correctly.
Thanks!
I just keep hacking away...
RevTom said:
Thanks for your many posts all over the forum.
I am a noob, and you've helped. I had a question about your post here.
I see you did this in April. Do newer builds of CM9 automatically fix the naming problem with the nightlies?
As far as I know, I downloaded a January version, and then added a nightly, and I think the nightly installed correctly.
Thanks!
I just keep hacking away...
Click to expand...
Click to collapse
Depends on where you get your nightly. If you get it at sphsolutions, it is named properly (update-) and will install with the January edition of the image. If you get it at techerrata, they are named cm- and will not install unless you rename to update- or use my new image.
Sent from my NookColor using Tapatalk
I was able to bring a new nook color out of a boot loop using your CWM (5.5.0.4)! Thanks so much for taking the time do document / post this information and the clear/concise way it is done.
Thanks again.
I have no idea what happened. One day my NC was fine. Next time I tried to use it, it varies from bootloop to a dead screen. On rare occasions it will boot, but I get various gapps throwing me f/c right and left.
Let's see, I'm on an older CM7 nightly from a couple months back ... I believe nightly cm_encore_full-253m.zip.
Anyway, I've tried various things from formatting system, cache, etc ... but all fail. I've tried the New Bootable CWM Recovery SD (A10) as well as the CWM update (A8), but not solving anything. Though the CWM update appears to install, it changes nothing as when I get back into recovery, I'm still on the old 3.2.0.1. I've tried to install 7.2 and though it appears to go through the install process okay (i.e. no errors), when I'm infrequently able to reboot nothing has changed.
I've tried the 8 interrupted boots to no avail ... possibly because the boot process fluctuates from going to recovery or bootlooping or black screen or succeeding ... so the 8 step process just doesn't work.
Its though something (system, emmc, or ???) has corrupted and locked me into where I was without allowing anything new to install or change?
Any other suggestions on what I can do to wipe, go back to factory 1.0.1 stock, and start over? The restore procedures that I have seen require formatting system, cache, etc. but as far as I can tell, noting is actually formatting anything.
I'm usually able to back my way out of any problems, but since I don't know how this issue happened when my NC was fully charged and off ... turning into a battery dead NC for unknown reasons, not sure what next since I'm not making any headway.
cvhovey said:
I have no idea what happened. One day my NC was fine. Next time I tried to use it, it varies from bootloop to a dead screen. On rare occasions it will boot, but I get various gapps throwing me f/c right and left.
Let's see, I'm on an older CM7 nightly from a couple months back ... I believe nightly cm_encore_full-253m.zip.
Anyway, I've tried various things from formatting system, cache, etc ... but all fail. I've tried the New Bootable CWM Recovery SD (A10) as well as the CWM update (A8), but not solving anything. Though the CWM update appears to install, it changes nothing as when I get back into recovery, I'm still on the old 3.2.0.1. I've tried to install 7.2 and though it appears to go through the install process okay (i.e. no errors), when I'm infrequently able to reboot nothing has changed.
I've tried the 8 interrupted boots to no avail ... possibly because the boot process fluctuates from going to recovery or bootlooping or black screen or succeeding ... so the 8 step process just doesn't work.
Its though something (system, emmc, or ???) has corrupted and locked me into where I was without allowing anything new to install or change?
Any other suggestions on what I can do to wipe, go back to factory 1.0.1 stock, and start over? The restore procedures that I have seen require formatting system, cache, etc. but as far as I can tell, noting is actually formatting anything.
I'm usually able to back my way out of any problems, but since I don't know how this issue happened when my NC was fully charged and off ... turning into a battery dead NC for unknown reasons, not sure what next since I'm not making any headway.
Click to expand...
Click to collapse
It really does sound like nothing is taking. You should have been able to go to the new CWM on emmc. But you are still on the old CWM and your formats fail. So, I suspect that one or more of your partitions got corrupted somehow and everything is read only. I do not know a lot about how to fix those. But others here are very adept at that. DizzyDen for one. You might search xda nook color for info on repairing partitions. I know adb is often used for that. Sorry if I'm not much help, but maybe someday when I learn a little more on how to fix them I can help someone.
Sent from my Nook Color running ICS and Tapatalk
Thx ... I'll continue searching and try to find something to fix the partitions.
One question. What is meant by the term " hard shut down "? I take it that refers to shutting system down using power button ? How else would one accomplish this shut down of the NC ? Uggg I'm such a NOOB !
Sent from my SCH-I500 using XDA
icemanwbs said:
One question. What is meant by the term " hard shut down "? I take it that refers to shutting system down using power button ? How else would one accomplish this shut down of the NC ? Uggg I'm such a NOOB !
Sent from my SCH-I500 using XDA
Click to expand...
Click to collapse
Hard powering off means holding the power key for like 15 seconds until the device goes completely off, not just to sleep. A short touch does not turn it off, it just puts it to sleep. If you are in a ROM, the proper way to turn the power completely off is to hold the power button until a menu pops up and you select 'power off'. If you are in CWM you should go to the menu item that says 'reboot' and it will. You want to shut your devices down properly so they finish any tasks they have running before shutting down. It's just like on your PC, you don't unplug the power cord on the PC when it's running, you tell it to shut down with the start menu. Hard powering off is just like pulling the plug on a PC. Sometimes it is necessary if things are locked up, but it is not the preferred way to do it.
Sent from my Nook Color running ICS and Tapatalk
Ahh OK. Gotcha ! Love your guide, been using it since I got my NC
I'm pretty good at android flashing with phone ( Samsung fascinate running ICS 4.0.4 ! )
One more thing, do I need to do anything special now that I have flashed the CWM 5.0.0.4 recovery ?
Thanks a million. People like you make XDA a treat !! :thumbup:
Sent from my SCH-I500 using XDA
icemanwbs said:
One more thing, do I need to do anything special now that I have flashed the CWM 5.0.0.4 recovery ?
Sent from my SCH-I500 using XDA
Click to expand...
Click to collapse
No, just leave it there in case you need it in the future. Any time you tell your nook to go to recovery, it will be there waiting.
Sent from my Nook Color running ICS and Tapatalk
Okay, I'm REALLY a noob at this...
I have tried my hardest to follow the threads about loading CM7 onto my mSD card in order to allow dual-booting stock (via emmc) and CM 7.2 stable via mSD (an 8GB Samsung class 6), but I feel I really f'd things up.
How I got to here:
1. I tried following this thread:
http://forum.xda-developers.com/showthread.php?t=1000957
Got to where it should have run the cm-7.2.0-encore.zip, but wouldn't find it.
2. Tried renaming to update-cm-7.2.0-encore.zip, as well as udpatei-cm-7.2.0-encore.zip.
3. Started reading more (didn't do that at first because it seemed complete enough).
4. Found your posts towards the end saying things have changed and to go to your tips page, so I did.
5. Read that I should use CWM 5.5.0.4-bootable_SD.img instead WITH SDCard-BootFiles-Rev3.
6. Ran Win32DiskImager with CWM 5.5.0.4...img to image the mSD.
7. copied the Rev3 files into the mSD as well as the cm-7.2.0.encore.zip.
8. inserted the mSD into the NookColor.
9. Booted into CWM.
10. selected the cm-7.2.0-encore.zip and said I'm sure.
11. It installed, i rebooted.
12. It looks like it installed onto the emmc as all my old settings are still there (wireless networks, etc.).
13. Immediately started force closing some process apps.
Now what? I feel I'm in a bad place and need to get back to having a stock 1.4.2 NC on the emmc and CM7 (stable) on SD. Maybe I missed a step (as great as the effort has been to get all this automated and setup, I feel it's still not straight forward enough for me ). Any and all help is appreciated.
P.S. Also, Is see CM9 mentioned, but no links as to where to get it for the NC (No encore build either). Is this still beta? If so, I'll stick with CM7 for now.
Thanks again in advance.
corvair64 said:
I have tried my hardest to follow the threads about loading CM7 onto my mSD card in order to allow dual-booting stock (via emmc) and CM 7.2 stable via mSD (an 8GB Samsung class 6), but I feel I really f'd things up.
How I got to here:
1. I tried following this thread:
http://forum.xda-developers.com/showthread.php?t=1000957
Got to where it should have run the cm-7.2.0-encore.zip, but wouldn't find it.
2. Tried renaming to update-cm-7.2.0-encore.zip, as well as udpatei-cm-7.2.0-encore.zip.
3. Started reading more (didn't do that at first because it seemed complete enough).
4. Found your posts towards the end saying things have changed and to go to your tips page, so I did.
5. Read that I should use CWM 5.5.0.4-bootable_SD.img instead WITH SDCard-BootFiles-Rev3.
6. Ran Win32DiskImager with CWM 5.5.0.4...img to image the mSD.
7. copied the Rev3 files into the mSD as well as the cm-7.2.0.encore.zip.
8. inserted the mSD into the NookColor.
9. Booted into CWM.
10. selected the cm-7.2.0-encore.zip and said I'm sure.
11. It installed, i rebooted.
12. It looks like it installed onto the emmc as all my old settings are still there (wireless networks, etc.).
13. Immediately started force closing some process apps.
Now what? I feel I'm in a bad place and need to get back to having a stock 1.4.2 NC on the emmc and CM7 (stable) on SD. Maybe I missed a step (as great as the effort has been to get all this automated and setup, I feel it's still not straight forward enough for me ). Any and all help is appreciated.
P.S. Also, Is see CM9 mentioned, but no links as to where to get it for the NC (No encore build either). Is this still beta? If so, I'll stick with CM7 for now.
Thanks again in advance.
Click to expand...
Click to collapse
Ok, your first mistake was copying the rev 3 boot files to the CWM SD. You should have copied them to the verygreen SD. That way it upgrades the older version to my newest version so it reads the newly named files correctly. And if you wanted CM 7.2 on SD you should have copied that zip there too. (You probably wiped out your verygreen SD to make the CWM SD and that caused your confusion.)
The second mistake was when you used my CWM SD to flash the CM 7.2. It put it on emmc replacing your stock. And if you do that you should have done a factory reset first as the apps as installed on stock do not work well on CM7. That's why you are getting the force closings.
If you want to keep CM7 on emmc, just boot to my CWM card and do a factory reset. That clears out the apps as installed by stock. That also means you will have to install all your apps again. Also you should install gapps. Go to goo.im/gapps and select the latest gingerbread version, download it and flash with my CWM card.
If you are happy with CM7 on emmc, you should flash CWM to your emmc so you don't need my card anymore (see the last paragraph in my item B1 for instructions 'get the flashable version here') Then you can reformat the CWM card to use as a data card for your emmc installed CM 7.2.
If you truly want to return to stock on emmc and CM7.2 on SD, let me know and I will walk you through it. It is a lot more work.
Also CM9 is available but is still in development. If you want that I can direct you to that too.
New question. In settings/battery use.....it shows " PHONE IDLE " 40%....and "CELL STANDBY" 30%.....since obviously we don't need these, how do I get rid of them ??? Lol;
Sent from my SCH-I500 using XDA
icemanwbs said:
New question. In settings/battery use.....it shows " PHONE IDLE " 40%....and "CELL STANDBY" 30%.....since obviously we don't need these, how do I get rid of them ??? Lol;
Sent from my SCH-I500 using XDA
Click to expand...
Click to collapse
You don't need to. Those are false readings. Just leave them there.
Help. I flashed cm9 onto SD card. ( from cm7 ). Said was successful, then when I went to re boot, on boot menu, I chose" SD Card Normal" and now its just stuck there.
OK....I got it to boot into cm9...! . Now screen becomes unresponsive while in use and I have to keep re booting.
Sent from my SCH-I500 using xda app-developers app
icemanwbs said:
Help. I flashed cm9 onto SD card. ( from cm7 ). Said was successful, then when I went to re boot, on boot menu, I chose" SD Card Normal" and now its just stuck there.
OK....I got it to boot into cm9...! . Now screen becomes unresponsive while in use and I have to keep re booting.
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
Sometimes it is necessary to wipe things when going from CM7 to CM9. That is difficult to do with the SD install. I recommend you go to my item B5 in my tips thread and install the alternate CWM that has been modified to work with SD installs. You can do a factory reset with that and it cleans up the SD. Also wipe system with it. It will not effect emmc. You may want to backup with Titanium Backup first to save your installed apps. Then reinstall the rom and restore your apps with Tibu.

Nook HD 9 stuck on Nook logo

Here is my problem description:-
I was using CM10.1.3 emmc with CWM latest version as suggested in the respective thread. I have installed a SD formatter app from Google Play and tried to format my 32GB Class 10 Samsung MicroSD card inside the device. After that, the sd card was non writable. So I tried to restart the device, but alas, it got stuck in the 1st Black screen with the big Nook. Not even able to boot into CWM. Even the CyanogenMod logo didn't come.
I have a bootable CWM (6.0.28) recovery MicroSD card (8GB Class 4) and used it to boot into recovery, cleared Cache/ Factory reset, Dalvik Cache and then again flashed Carbon unofficial 4.3 JB rom and Gapps for JB 4.3. But it still getting stuck in the 1st Nook screen.
After reading a lots of thread here, it looks like that during the format of SD card, it somehow destroyed the proper partitions of the emmc. But unlike others mentioned in different Bricked Nook HD thread, I am able to access each components of emmc when booted from CWM Bootable card, able to mount internal storage etc.
So, is there a solution to restore the emmc partitioning properly? I tried to connect it to PC for connecting it through adb but didn't have the proper usb driver for it. The driver I got, needs the hardware id of the product to modify the inf file which sadly I can't access in the device.
I also tried to restore it to stock 2.2 rom from the CWM backup created earlier before installing CM10.1.3. It got restored but didn't solve the problem, it still getting stuck into Black screen with Nook written to it, the one comes before CM logo.
Please help.
Anyone? Please guys help me here.
Suryasis said:
Here is my problem description:-
I was using CM10.1.3 emmc with CWM latest version as suggested in the respective thread. I have installed a SD formatter app from Google Play and tried to format my 32GB Class 10 Samsung MicroSD card inside the device. After that, the sd card was non writable. So I tried to restart the device, but alas, it got stuck in the 1st Black screen with the big Nook. Not even able to boot into CWM. Even the CyanogenMod logo didn't come.
I have a bootable CWM (6.0.28) recovery MicroSD card (8GB Class 4) and used it to boot into recovery, cleared Cache/ Factory reset, Dalvik Cache and then again flashed Carbon unofficial 4.3 JB rom and Gapps for JB 4.3. But it still getting stuck in the 1st Nook screen.
After reading a lots of thread here, it looks like that during the format of SD card, it somehow destroyed the proper partitions of the emmc. But unlike others mentioned in different Bricked Nook HD thread, I am able to access each components of emmc when booted from CWM Bootable card, able to mount internal storage etc.
So, is there a solution to restore the emmc partitioning properly? I tried to connect it to PC for connecting it through adb but didn't have the proper usb driver for it. The driver I got, needs the hardware id of the product to modify the inf file which sadly I can't access in the device.
I also tried to restore it to stock 2.2 rom from the CWM backup created earlier before installing CM10.1.3. It got restored but didn't solve the problem, it still getting stuck into Black screen with Nook written to it, the one comes before CM logo.
Please help.
Click to expand...
Click to collapse
What SD formatter app program from Play Store are you talking about? I need to know that so I can determine what you did?
Sent from my SCH-i705 using XDA Premium HD app
I have used the tool AParted (https://play.google.com/store/apps/details?id=com.sylkat.AParted) and tried to format my 32GB Samsung Class 10 MicroSD card.
BTW, in the mean time, I did little bit of digging and got the Serial of the Tab and if you want can share with you. I have also tried to install the CM10.2 SD card version with CWM 6.027 Bootable SD card. I was able to push the Zip files to the SD card using QtADB tool by mounting the SD card in the CWM menu, installed the CM rom to SD card and then installed the Gapps for JB 4.3. Still unable to boot into CM, it is going to CWM in every restart. Used this guide http://forum.xda-developers.com/showthread.php?t=2032364 for installation.
Suryasis said:
I have used the tool AParted (https://play.google.com/store/apps/details?id=com.sylkat.AParted) and tried to format my 32GB Samsung Class 10 MicroSD card.
BTW, in the mean time, I did little bit of digging and got the Serial of the Tab and if you want can share with you. I have also tried to install the CM10.2 SD card version with CWM 6.027 Bootable SD card. I was able to push the Zip files to the SD card using QtADB tool by mounting the SD card in the CWM menu, installed the CM rom to SD card and then installed the Gapps for JB 4.3. Still unable to boot into CM, it is going to CWM in every restart. Used this guide http://forum.xda-developers.com/showthread.php?t=2032364 for installation.
Click to expand...
Click to collapse
You are using some strange and outdated tools. That AParted probably really messed up you internal memory.
That guide is an old one for putting CM10 on an SD install. And you do not install the SD version of CM10.2 with that 6027 bootable CWM SD. Pick a newer guide and start again.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You are using some strange and outdated tools. That AParted probably really messed up you internal memory.
That guide is an old one for putting CM10 on an SD install. And you do not install the SD version of CM10.2 with that 6027 bootable CWM SD. Pick a newer guide and start again.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Actually I realised that and used the new guide for for installation of latest CM10.2 build by using the latest guide here: http://forum.xda-developers.com/showthread.php?p=36421852#post36421852. But whenever I am trying to boot into CM10.2, it is getting booted into CWM recovery.
I have checked in another thread where you had made a ZIP file to fix the internal storage structure, is it possible for my case.? Should I use this guide: http://iamafanof.wordpress.com/2013/09/17/cm10-2-jellybean-android-4-3-for-nook-hd-18sep2013/
I have used the method in http://iamafanof.wordpress.com/2013/09/17/cm10-2-jellybean-android-4-3-for-nook-hd-18sep2013/ and installed 10.2. But during restart, it is showing the message that /Bootdata/BCB missing and probably that is the reason, it is always rebooting into recovery mode. I have checked in one thread where you have made a flashable Zip file to restore the system partitions. Can it be done for my case?
Waiting for your answer.
Suryasis said:
I have used the method in http://iamafanof.wordpress.com/2013/09/17/cm10-2-jellybean-android-4-3-for-nook-hd-18sep2013/ and installed 10.2. But during restart, it is showing the message that /Bootdata/BCB missing and probably that is the reason, it is always rebooting into recovery mode. I have checked in one thread where you have made a flashable Zip file to restore the system partitions. Can it be done for my case?
Waiting for your answer.
Click to expand...
Click to collapse
Start over and use this thread:
http://forum.xda-developers.com/showthread.php?t=2317500
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Start over and use this thread:
http://forum.xda-developers.com/showthread.php?t=2317500
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Will that fix the emmc partitions in HD+? Initially I have installed CM10.1.3 by using this method and after the issue occurred, I tried to install the Carbon 4.3 ROM through CWM recovery after performing FActory reset, cache cleaning and Dalvik Cache cleanup. But that didn't solve the issue. I have even tried to restore the stock Nook 2.2 firmware from the CWM recovery which I created earlier before installing the CM10.3. But the issue didn't get resolved.
Suryasis said:
Will that fix the emmc partitions in HD+? Initially I have installed CM10.1.3 by using this method and after the issue occurred, I tried to install the Carbon 4.3 ROM through CWM recovery after performing FActory reset, cache cleaning and Dalvik Cache cleanup. But that didn't solve the issue. I have even tried to restore the stock Nook 2.2 firmware from the CWM recovery which I created earlier before installing the CM10.3. But the issue didn't get resolved.
Click to expand...
Click to collapse
If you used the CWM from that thread and flashed the plain stock 2.2.0, it should have fixed it.
Sent from my BN NookHD+ using XDA Premium HD app
I have tried the following steps:-
Downloaded the TWRP emmc 2.6 Bootfiles, copied them to a 64GB Class 10 sd card by formatting it to FAT32, setting it to active and then copied the Files (MLO file 1st) into it.
Also copied Nook stock 2.2 zip in the sd card.
With the card installed, Nook HD+ booted into TWRP recovery.
Performed a factory reset and wipe data.
Installed the stock rom.
After that, I checked the Bootfile partition and it was having the BCB file.
I am also able to access 27GB Emmc and copied all the zip files to Internal store using TWRP file manager.
Now I took out the SD card and tried to boot the Tab but it was again stuck into 1st Boot screen with Nook logo.
When I inserted the card 2nd time and checked the Boot Data partition using the TWRP's integrated file manager, there was nothing inside of the /BootData folder.
Is there a way to build the /Bootfiles/BCB for Nook HD plus?
Suryasis said:
I have tried the following steps:-
Downloaded the TWRP emmc 2.6 Bootfiles, copied them to a 64GB Class 10 sd card by formatting it to FAT32, setting it to active and then copied the Files (MLO file 1st) into it.
Also copied Nook stock 2.2 zip in the sd card.
With the card installed, Nook HD+ booted into TWRP recovery.
Performed a factory reset and wipe data.
Installed the stock rom.
After that, I checked the Bootfile partition and it was having the BCB file.
I am also able to access 27GB Emmc and copied all the zip files to Internal store using TWRP file manager.
Now I took out the SD card and tried to boot the Tab but it was again stuck into 1st Boot screen with Nook logo.
When I inserted the card 2nd time and checked the Boot Data partition using the TWRP's integrated file manager, there was nothing inside of the /BootData folder.
Is there a way to build the /Bootfiles/BCB for Nook HD plus?
Click to expand...
Click to collapse
it will do no good to build that file since you already had it and the boot to emmc wiped it out. TWRP puts it back when it exits, but your normal boot seems to remove it.
Sent from my SCH-i705 using XDA Premium HD app
Please suggest me a solution for it. I read here that there is a special type of SD installation possible with no access to the emmc and the OS will threat the SD card like it treats the emmc. Could you link me to a proper guide to do that?
Also, in my case, what might be the main problem of deletion of the Bootdata partition during emmc boot? Is there any possible solution for it?
Also, if possible, provide me the Zip file for the fix, just wanted to try it out as nothing is working till now.
Anybody? please let me know how to fix the emmc partitions. I still has hope as I am completely able to access my EMMC via SD card boot.While using TWRP recovery, I can even copy files from my SD card to internal memory of the device. Also able to flash Roms too.
So please provide me a flashable Zip file which can reconstruct the EMMC file structure for proper boot.
Suryasis said:
Anybody? please let me know how to fix the emmc partitions. I still has hope as I am completely able to access my EMMC via SD card boot.While using TWRP recovery, I can even copy files from my SD card to internal memory of the device. Also able to flash Roms too.
So please provide me a flashable Zip file which can reconstruct the EMMC file structure for proper boot.
Click to expand...
Click to collapse
I'm also in need of the same thing. I believe SD card manager or some such program fubared my partitions so now my Nook HD+ just hangs at the nook logo when booting from EMMC. I can boot off SD just fine though.
Suryasis said:
Please suggest me a solution for it. I read here that there is a special type of SD installation possible with no access to the emmc and the OS will threat the SD card like it treats the emmc. Could you link me to a proper guide to do that?
Also, in my case, what might be the main problem of deletion of the Bootdata partition during emmc boot? Is there any possible solution for it?
Click to expand...
Click to collapse
I was also in a similar situation in that I was stuck at the nook screen and not able to go beyond. I thought it was due to a discharged battery and leaving the Nook in my car in -20 F weather. However, I was not able to enter recovery. I found a thread by Verygreen detailing an SD card only installation for bad emmc units. I dd'd the image to the sd card and booted to cwm on the card. Then shut down, pulled the sd card and copied the rom to the card. Rebooted and the install went through correctly. I now have a working Nook HD+ although I don't have emmc access. But at least it works now. I found the thread in one of the other "Stuck on Nook screen" threads. Hope this helps you.

Duplicate an SD card install.

Is there any way to duplicate an SD card install for my Nook Color? I have the latest Cyanogenmod nightly on an existing card but I can't seem to burn a new nightly starting from scratch. The new nightlies all update the existing card. I figure if I can just duplicate the existing, working card I can update it.
As a side note the new installations all give me an endless reboot at the cyanogen logo. I am using Win32Disk Imager, generic-sdcard-v1.3-CM7-9-10-10.1-10.2-11-largest-Rev8b.img, and can't get past this reboot loop. The cards all had working installs on them previously so I know there is not a compatibility issue with them.
Thanks in advance
f1jim
You can use win32diskimager to make an image of the existing card and write that image back to a new card. But be warned, depending on the size of the existing SD, the image can be quite big (same size as the card).
On writing the new 8b image, are you letting it boot first to set up the partitions before you add the CM zip? Also, you said those cards had working installs on those before writing the image. Did you format the card first using SDFormatter? You need to to clear the prior installation. Use size adjustment and overwrite options too.
Sent from my SCH-i705 using XDA Premium HD app
Thanks
I will try your suggestion on booting first without the zip file.
Thanks
f1jim
leapinlar said:
You can use win32diskimager to make an image of the existing card and write that image back to a new card. But be warned, depending on the size of the existing SD, the image can be quite big (same size as the card).
On writing the new 8b image, are you letting it boot first to set up the partitions before you add the CM zip?
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
f1jim said:
I will try your suggestion on booting first without the zip file.
Thanks
f1jim
Click to expand...
Click to collapse
see my edit above. You need to format the sd first.
Sent from my SCH-i705 using XDA Premium HD app
I formatted the SD card, used Win32DiskImager, took the card out of the machine, reinserted it, inserted it in the Nook, It did it's thing till it got to the line that looks for the file starting with CM or ends in zip. It goes no further and just flashes a cursor. I take the SD card out of the nook and with it in the PC copy the nightly zip. I then insert it in the Nook and boot up. It appears to be installing everything then shuts down.
I reboot and it starts the reboot cycle over and over. Am I missing a step in the process?
Also I open Win32DiskImager and don't see a way to copy the working SD install. Seems like it only will read and write .img files.
Thanks
f1jim
Win32diskimager is not supposed to copy the install. It is supposed to create an image (read the card to an img file) of the existing SD. Then use it to write that img file back to a new SD.
And when you formatted you used SDFormatter with the options I suggested? If you did not, then you only changed the SD headers and did not erase the prior data and it is still there when the SD partitions itself.
Sent from my BN NookHD+ using XDA Premium HD app
I can't figure out how to get Win32DiskImager to make an image of the existing install. I see no menu selection to allow this. Are you sure you are not thinking of another program.
Or am I not seeing something obvious?
f1jim
leapinlar said:
Win32diskimager is not supposed to copy the install. It is supposed to create an image (read the card to an img file) of the existing SD. Then use it to write that img file back to a new SD.
And when you formatted you used SDFormatter with the options I suggested? If you did not, then you only changed the SD headers and did not erase the prior data and it is still there when the SD partitions itself.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
f1jim said:
I can't figure out how to get Win32DiskImager to make an image of the existing install. I see no menu selection to allow this. Are you sure you are not thinking of another program.
Or am I not seeing something obvious?
f1jim
Click to expand...
Click to collapse
Yes the obvious thing you are missing is the read button. The read/write buttons mean read or write the card. When you press the write button with the 8b image file in the box, it writes that image to the card. When you select the read button, it reads the card and makes a new image file that you have typed into the name box. The new image file will be the same size as your whole SD. Then you can use that new image file to write to a new SD. It does not guarantee that the new card is bootable though. Just try it.
You did not answer my question about using SDFormatter.
Sent from my BN NookHD+ using XDA Premium HD app
When I run the program the box that opens says image file and a white box that's empty below it. To the right of that box is a blue navigation button that allows one to navigate to an .img file. Still farther right is a device box that only allows the selection of my removable SD drive. The read and write buttons are grayed out till I select an .img file in the white box. Since my current useable SD card had no .img file on it how do you propose I select the SD card to write an image of?
Honest, I have looked this over with a fine toothed comb but cant see how to select my SD card to write an image. The blue selection box will only look for .img files. Till that happens nothing else is an option.
I have been formatting the SD card with Mini Tool Partition Wizard. I format the SD card using Fat32. After that the PC sees it just fine. I will look for SDFormatter and use it.
Sorry if I am overlooking something that should be obvious to me. Your help is greatly appreciated.
f1jim
leapinlar said:
Yes the obvious thing you are missing is the read button. The read/write buttons mean read or write the card. When you press the write button with the 8b image file in the box, it writes that image to the card. When you select the read button, it reads the card and makes a new image file that you have typed into the name box. The new image file will be the same size as your whole SD. Then you can use that new image file to write to a new SD. It does not guarantee that the new card is bootable though. Just try it.
You did not answer my question about using SDFormatter.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
What happens when you type a new file name in the box? Does the read button come ungreyed? Pick a location and type a name like mycard.img.
And as I told you, unless you use SDFormatter with the overwrite and size adjustment on, you are not really formatting, just writing new headers.
Sent from my BN NookHD+ using XDA Premium HD app
I used the name "test" and yes, the read button became ungreyed. I hit read and it continued for awhile until an error message popped up at 3%. It says "An error occurred when attempting to read data from handle. Error 1117: The request could not be performed because of an I/O device error. Tried it twice. Same outcome.
f1jim
leapinlar said:
What happens when you type a new file name in the box? Does the read button come ungreyed? Pick a location and type a name like mycard.img.
And as I told you, unless you use SDFormatter with the overwrite and size adjustment on, you are not really formatting, just writing new headers.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Since it is obvious you are going to continue to have issues with this method, I suggest you abandon that and use one of the two below.
1. Use SDFormatter with the size adjustment and overwrite options selected. This truly erases everything on the SD. Other methods, including Mini-Tool, just 'quick erase', leaving old data there when it re-partitions itself back to the old partition structure. So when CM tries to run it has the old data from your prior install and hangs.
Or
2. Go to my NC Tips thread linked in my signature and get the Alternate CWM from item B5. After you have burned the image and let it boot the first time to repartition itself and installed the CM zip, install the Alternate CWM and boot to it. Use that to do a wipe data/factory reset. That clears your old data from your old install so CM can boot properly. If it still hangs using this method, you may have to go to mounts and storage and format /system. Then re-install CM using the copy to boot partition method, not the Alternate CWM.
Sent from my BN NookHD+ using XDA Premium HD app
Once more......
I'll give this a try once again. There has to be something obvious I am overlooking. I have 2 SD chips that have previously worked with android installations on them. Following your advice this is what I have done with both of them and with no success:
I have formatted each chip with SDFormatter using the OVERWRITE and AUTO SIZE options turned on. I then use Win32DiskImager to burn the image generic-sdcard-v1.3-CM7-9-10-10.1-10.2-11-largest-Rev8b.img. I then copy the latest nightly to the root directory and boot the chip in the Nook Color. It appears to go through the setup process and shut down properly. Upon rebooting the nook color it comes up to the Cyanoboot Universal Bootloader and says loading. Then the screen goes dark and it reboots back to the Cyanoboot Universal Botloader screen and reboots yet again. It seems stuck in this loop. Same issue using both SD chips.
I'm utterly lost.
Thanks
f1jm
leapinlar said:
Since it is obvious you are going to continue to have issues with this method, I suggest you abandon that and use one of the two below.
1. Use SDFormatter with the size adjustment and overwrite options selected. This truly erases everything on the SD. Other methods, including Mini-Tool, just 'quick erase', leaving old data there when it re-partitions itself back to the old partition structure. So when CM tries to run it has the old data from your prior install and hangs.
Or
2. Go to my NC Tips thread linked in my signature and get the Alternate CWM from item B5. After you have burned the image and let it boot the first time to repartition itself and installed the CM zip, install the Alternate CWM and boot to it. Use that to do a wipe data/factory reset. That clears your old data from your old install so CM can boot properly. If it still hangs using this method, you may have to go to mounts and storage and format /system. Then re-install CM using the copy to boot partition method, not the Alternate CWM.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
f1jim said:
I'll give this a try once again. There has to be something obvious I am overlooking. I have 2 SD chips that have previously worked with android installations on them. Following your advice this is what I have done with both of them and with no success:
I have formatted each chip with SDFormatter using the OVERWRITE and AUTO SIZE options turned on. I then use Win32DiskImager to burn the image generic-sdcard-v1.3-CM7-9-10-10.1-10.2-11-largest-Rev8b.img. I then copy the latest nightly to the root directory and boot the chip in the Nook Color. It appears to go through the setup process and shut down properly. Upon rebooting the nook color it comes up to the Cyanoboot Universal Bootloader and says loading. Then the screen goes dark and it reboots back to the Cyanoboot Universal Botloader screen and reboots yet again. It seems stuck in this loop. Same issue using both SD chips.
I'm utterly lost.
Thanks
f1jm
Click to expand...
Click to collapse
Nightly of what, CM11? And what date? A fresh download?
And as the text is scrolling past are there any error messages? Are you installing in two steps? In other words are you letting it boot first to make the partitions followed by copying the CM zip and booting again?
Sent from my BN NookHD+ using XDA Premium HD app
Once again
Yes, the nightly CM11. cm-11-20140510-NIGHTLY-encore.zip to be exact. Yes, fresh downloiad. I will try to boot to the chip before copying over the nightly this time.
Fingers crossed.
f1jim
leapinlar said:
Nightly of what, CM11? And what date? A fresh download?
And as the text is scrolling past are there any error messages? Are you installing in two steps? In other words are you letting it boot first to make the partitions followed by copying the CM zip and booting again?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
No luck.
This time I started from scratch again. Formatted the chip with SDFormatter(4.0), Used a fresh downloaded copy of the generic img file. Botted it in the Nook. No error messages and it stopped at the place where it looks for the zip file. Pulled the chip, copied a fresh download of the CM11 nightly. Popped in the chip and started up the Nook. It went through the installation process with no error messages and properly shut itself down. Rebooted the Nook only to have it load the Cyanoboot universal bootloader page, says it's loading....then it goes black and reboots to the same bootloader page.
Any more ideas that don't involve dynamite?
f1jim
f1jim said:
This time I started from scratch again. Formatted the chip with SDFormatter(4.0), Used a fresh downloaded copy of the generic img file. Botted it in the Nook. No error messages and it stopped at the place where it looks for the zip file. Pulled the chip, copied a fresh download of the CM11 nightly. Popped in the chip and started up the Nook. It went through the installation process with no error messages and properly shut itself down. Rebooted the Nook only to have it load the Cyanoboot universal bootloader page, says it's loading....then it goes black and reboots to the same bootloader page.
Any more ideas that don't involve dynamite?
f1jim
Click to expand...
Click to collapse
Before doing anything drastic, read this.
http://forum.xda-developers.com/showpost.php?p=52506409&postcount=283.
Once again....
I most definitely have a Nook color. I think I mentioned early on I have a chip with the latest nightly on it and it works beautifully. The other chips used to as well. I just can't figure out why they stopped working when I tried to start from scratch with them.
I do appreciate your efforts in helping. It's not the end of the world if I can't get them to work. I'll keep trying.
f1jim
hwong96 said:
Before doing anything drastic, read this.
http://forum.xda-developers.com/showpost.php?p=52506409&postcount=283.
Click to expand...
Click to collapse
f1jim said:
This time I started from scratch again. Formatted the chip with SDFormatter(4.0), Used a fresh downloaded copy of the generic img file. Botted it in the Nook. No error messages and it stopped at the place where it looks for the zip file. Pulled the chip, copied a fresh download of the CM11 nightly. Popped in the chip and started up the Nook. It went through the installation process with no error messages and properly shut itself down. Rebooted the Nook only to have it load the Cyanoboot universal bootloader page, says it's loading....then it goes black and reboots to the same bootloader page.
Any more ideas that don't involve dynamite?
f1jim
Click to expand...
Click to collapse
What are the sizes of these two chips you have used previously? You know CM11 requires larger chips.
Sent from my BN NookHD+ using XDA Premium HD app
Once again....
Both chips are 8Gb. The one that is working properly is 16Gb.
f1jim

[Q] Nook HD+ Install issue Status 7

Hi Guys, needing a bit of help to see if I can get my Nook HD+ back up and running.
A little background. Nook is 2013 model. Has worked pretty well in past, had added files last year to allow access to Play and flash, worked well, so I came back here when my nook went to the 99% reboot screen and has locked up there. B&N can't seem to help any. None of my computers will recognize the nook, so I can't sideload the NPK update that they said might fix the nook. So after laughing at their offer of an extra 10% off an ereader or the new Samsung, I decided to try changing to CM's Ovation. Have tried to follow Leapinlar's thread on installing CM and have tried 10.2,10.1 and a version of 11 along with another d/l of 10.2 from another poster.
I can boot from the SD card, but with really no currently working ROM, I need to use the install to internal version.
So I've used SD formatter on the SD card, copied over the files in order listed and then booted to the card.
Did a backup and restore, worked
did wipe data and factory reset
then install from sd card,
the system then gives me an error when installing the CM files:
Set_perm: some changes failed
E:Error in /sdcard/CM XXXX (no matter which CM I pick)
(status 7)
Installation aborted.
Any idea as to how I can resolve this?
I'm at a loss and can't find resolution.:crying:
Thank you!!
What recovery exactly are you using to try and install CM? The one you boot from SD card? What version is it?
Some recoveries are too old to install CM11, for example. I suggest you install TWRP 2.7.1.0 as internal recovery on your Nook. You can download it here. Just put that TWRP zip file onto your bootable SD card, boot the HD+ and install the zip file. Then remove the SD card and format it, or use a different one that isn't bootable. Put the CM11 install zip file onto the card, insert it, and boot the internal recovery by holding the "N" button and powering up the tablet. Keep the N button pressed until the TWRP splash screen shows. If TWRP doesn't boot, then something went wrong. If it does boot, you can try and install CM11 with it.
liferj said:
Hi Guys, needing a bit of help to see if I can get my Nook HD+ back up and running.
A little background. Nook is 2013 model. Has worked pretty well in past, had added files last year to allow access to Play and flash, worked well, so I came back here when my nook went to the 99% reboot screen and has locked up there. B&N can't seem to help any. None of my computers will recognize the nook, so I can't sideload the NPK update that they said might fix the nook. So after laughing at their offer of an extra 10% off an ereader or the new Samsung, I decided to try changing to CM's Ovation. Have tried to follow Leapinlar's thread on installing CM and have tried 10.2,10.1 and a version of 11 along with another d/l of 10.2 from another poster.
I can boot from the SD card, but with really no currently working ROM, I need to use the install to internal version.
So I've used SD formatter on the SD card, copied over the files in order listed and then booted to the card.
Did a backup and restore, worked
did wipe data and factory reset
then install from sd card,
the system then gives me an error when installing the CM files:
Set_perm: some changes failed
E:Error in /sdcard/CM XXXX (no matter which CM I pick)
(status 7)
Installation aborted.
Any idea as to how I can resolve this?
I'm at a loss and can't find resolution.:crying:
Thank you!!
Click to expand...
Click to collapse
Yes, as the prior user said, you are using the wrong version of CWM to install the CM zip. CM10.1 and CM10.2 need v6028 or v6036. CM11 needs v6046. You can get them from the dummies thread linked in my signature.
Sent from my BN NookHD+ using XDA Premium HD app
Tzul said:
What recovery exactly are you using to try and install CM? The one you boot from SD card? What version is it?
Some recoveries are too old to install CM11, for example. I suggest you install TWRP 2.7.1.0 as internal recovery on your Nook. You can download it here. Just put that TWRP zip file onto your bootable SD card, boot the HD+ and install the zip file. Then remove the SD card and format it, or use a different one that isn't bootable. Put the CM11 install zip file onto the card, insert it, and boot the internal recovery by holding the "N" button and powering up the tablet. Keep the N button pressed until the TWRP splash screen shows. If TWRP doesn't boot, then something went wrong. If it does boot, you can try and install CM11 with it.
Click to expand...
Click to collapse
I have tried to follow the thread instructions and used what appeared to be matching installers, if I didn't, I did see error for not matching. I'll go and try above recovery. Got to probably get another sd card.
Tzul said:
What recovery exactly are you using to try and install CM? The one you boot from SD card? What version is it?
Some recoveries are too old to install CM11, for example. I suggest you install TWRP 2.7.1.0 as internal recovery on your Nook. You can download it here. Just put that TWRP zip file onto your bootable SD card, boot the HD+ and install the zip file. Then remove the SD card and format it, or use a different one that isn't bootable. Put the CM11 install zip file onto the card, insert it, and boot the internal recovery by holding the "N" button and powering up the tablet. Keep the N button pressed until the TWRP splash screen shows. If TWRP doesn't boot, then something went wrong. If it does boot, you can try and install CM11 with it.
Click to expand...
Click to collapse
leapinlar said:
Yes, as the prior user said, you are using the wrong version of CWM to install the CM zip. CM10.1 and CM10.2 need v6028 or v6036. CM11 needs v6046. You can get them from the dummies thread linked in my signature.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Tried all three of these in that order. none worked. I'll go try above and see if it will work.

Categories

Resources