Database Develop

[STOCK][C6602&C6603][4.2.2] Update to 10.3.A.0.423 [Rooted & XZDualRecovery][LB/UB]

[STOCK][C6602&C6603][4.2.2] Update to 10.3.A.0.423 [Rooted & XZDualRecovery][LB/UB]
Requirements:
Flashtool by @Androxyde
XZDualRecovery 2.5 BETA
Current FW version: 10.1.A.1.350, 10.1.A.1.434, 10.1.1.A.1.253 or 10.1.1.A.1.307 all can be updated!
Special features:
Superuser integrated in system, FULL root, no reboots when remounting /system RW!
XZDualRecovery 2.5 BETA (CWM 6.0.3.2 & TWRP 2.5.0.0) pre-installed;
Tailored FTF to minimize the chance of accidental system wiping!
No need to clear caches!
@shem2409 created a nice youtube video guide to assist you in your work, be sure to check this post for it! Thanks m8!
In the following guide I suggest you use an external SDCard but that's just good practice, you can use your internal storage or even an USB OTG storage device in TWRP if you like to install, that's no problem!... If you are modding and the likes, best is to have an external sdcard, just for safeties sake.
C6602: How to update to 10.3.A.0.423:
NOTE: STICK TO THIS ORDER AND STEPS!!
For C6602: Download C6602.flashable.423.zip (Bittorrent: 686MB) and C6602_10.3.A.0.423-stripped.ftf (15MB), save it somewhere you remember;
Put 'C6602.flashable.423.zip' on (the external) SDcard1;
Put 'C6602_10.3.A.0.423-stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in CWM or TWRP and don't forget to backup the contents of 'SDCard0';
Flash 'C6602.flashable.423.zip' in TWRP, do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'C6602_10.3.A.0.423-stripped.ftf';
Reboot to system without clearing (dalvik-/)cache.
C6603: How to update to 10.3.A.0.423:
NOTE: STICK TO THIS ORDER AND STEPS!!
For C6603: Download C6603.flashable.423.zip (Bittorrent: 719MB) and C6603_10.3.A.0.423-stripped.ftf (15MB), save it somewhere you remember;
Put 'C6603.flashable.423.zip' on (the external) SDcard1;
Put 'C6603_10.3.A.0.423-stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in CWM or TWRP and don't forget to backup the contents of 'SDCard0';
Flash 'C6603.flashable.423.zip' in TWRP, do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'C6603_10.3.A.0.423-stripped.ftf';
Reboot to system without clearing (dalvik-/)cache.
The first boot will be considerably slower and after a long wait at the boot animation you will see Android optimizing the apps on your phone.
After updating your NFC firmware and some update information has been displayed, all is done!
I have done this myself, using my own method and I have not found any problem yet, again! :fingers-crossed:
Enjoy! :victory:
Known XZDualRecovery Issues:
TWRP Usage warning: It seems TWRP 2.5.0.0 has issues with the internal storage, which seem related to the changes made to support encrypted storage volumes... This means the internal storage sometimes shows up almost empty (just folders) and no files. Try to use CWM when that happens.
Busybox Updater/Installer: If you have XZDualRecovery installed, un-install any Busybox updating app/tool as most if not all of them will install a version of busybox which does not support the lzma compression applets XZDualRecovery depends on. The version installed together with XZDualRecovery is very stable and I have yet to hear anyone complain about it's stability.
How to report errors:
Please, before shouting out "It doesn't work!!1!" or "I lost root!" or even "My phone reboots when remounting /system RW!!" try the following:
Restore a /system ONLY using any means you are familiar with so you can try again.
Root it using [Z][ROOT] DooMLoRD Easy Rooting Toolkit.
Install XZDualRecovery and then try to update again using TWRP. This time you can skip the FTF as it has already done it's job.
If it still fails something from there on: LOGS!!.
NOTE: The important ones can be found in /cache/recovery and in /tmp/XZDualRecovery, pack them up and send them to me.
Thank you
Flashable ROM Mutator:
Download AROMA ROM Mutator 0.14
This (former patch package) uses AROMA to create a user friendly menu to choose between updates to be installed.
If you want to switch from SuperSU (default in this ROM) to SuperUser (Be careful, SuperUser is incompatible with 4.2.2!) you can use this to make the change.
If you have the reboot problem when trying to remount /system writable, you can reinstall the superuser app of your preference, it's installation includes the latest patch.
If you are missing /system/bin/chargemon.stock and you want to be able to charge your phone while it's turned off.
Flash using one of the recoveries!
Version 0.13 and upwards is using AROMA 2.70B1 or better, the below warning can be ignored for now. Let me know how it performs!
AROMA Warning: AROMA currently works best in TWRP but even there it has some issues on the Z/ZL. It sometimes does not start up correctly or it has a 'sticky button' issue. It makes it a little less easy to use but this will be fixed in time. It is a combination problem caused by the new hardware and incompatibility with it and the fact the recoveries both have been updated considerably to work on the latest phones, causing issues with some functionality of AROMA.
If it hangs when trying to start, reboot your phone and try again.
If it has the sticky buttons, press the button again to activate.
You can avoid the sticky buttons by pressing them for about half a second (that means not too short and not too long). It will work, it's just showing a bug associated with the latest recoveries.
The Samsung S4, HTC One and One X and the Nexus 4 & 7 show the same issues. For them AROMA sometimes crashes, this is an issue i have not yet observed on the Z/ZL.
Thanks go to @Androxyde for the FTF creation, cheers m8!

nice! so does that mean we dont need to factory wipe before upgrading? I thought if we go across versions (4.1.2 > 4.2.2) you gotta wipe all your stuff first.

After flashing the stripped ftf, the phone doesn't go into recovery. It shows green light, Sony logo and nothing else. Then it just reboot again. Already tried downloaing the file and flashing again. still the same problem.

Ya, I need manual install dual boot to access back to CWM/TWRP then just can install but the preinstall superuser root is not working at all.
Root working back by installing DooMLoRD Easy Rooting Toolkit (v15) - http://forum.xda-developers.com/showthread.php?t=2327472

Is there any reason why the dalvik cache are not wiped in this release process?
Is it simply a speed/optimisation thing, or will it cause issues if it happens?

Comming from PAC... Do i need to install other Stock rom before update or just use the instructions above? thanks.

Ok, so this is what ive done to get this to boot, on existing rom with recovery installed I flashed the .432.zip, obviously it bootlooped, but then flashed the ftf file which got the rom to boot. Then rooted and installed recovery as Andrewtst has linked to above.
Cheers.

Can't download the zip and ftf file, doesnt work, anyone can confirm that? can you reuploading or verify if is everything ok, thx for the work you done.

zanndoth said:
After flashing the stripped ftf, the phone doesn't go into recovery. It shows green light, Sony logo and nothing else. Then it just reboot again. Already tried downloaing the file and flashing again. still the same problem.
Click to expand...
Click to collapse
I got into the same problem, and cannot get out. Anyone has any advice?

please fix dead links

dopeee said:
nice! so does that mean we dont need to factory wipe before upgrading? I thought if we go across versions (4.1.2 > 4.2.2) you gotta wipe all your stuff first.
Click to expand...
Click to collapse
I found out with the leak by doomlord that it would be possible to update, no need to wipe, the official update works even better
lysp said:
Is there any reason why the dalvik cache are not wiped in this release process?
Is it simply a speed/optimisation thing, or will it cause issues if it happens?
Click to expand...
Click to collapse
It's meant as an update process and not wiping anything will make the ROM treat your phone as one that just got updated
Faelz said:
Comming from PAC... Do i need to install other Stock rom before update or just use the instructions above? thanks.
Click to expand...
Click to collapse
Yes, you need a stock ROM before you can flash this, I would not recommend updating your phone from PAC...
bungknees said:
Ok, so this is what ive done to get this to boot, on existing rom with recovery installed I flashed the .432.zip, obviously it bootlooped, but then flashed the ftf file which got the rom to boot. Then rooted and installed recovery as Andrewtst has linked to above.
Cheers.
Click to expand...
Click to collapse
&
zanndoth said:
After flashing the stripped ftf, the phone doesn't go into recovery. It shows green light, Sony logo and nothing else. Then it just reboot again. Already tried downloaing the file and flashing again. still the same problem.
Click to expand...
Click to collapse
&
chuazy said:
I got into the same problem, and cannot get out. Anyone has any advice?
Click to expand...
Click to collapse
I have modified the guide a bit as i should have done before i posted it...
Restore the kernel to anything other then the 4.2.2 one and then try to flash the update package, after flashing the update, re-flash the kernel.
I made one error in my guide: If someone is not using the correct version of XZDualRecovery (2.5 BETA) then you lose recovery when on the 4.2.2 kernel. The correct steps order to prevent this from happening are now in the OP.

please fix dead links

calvinleeabc said:
please fix dead links
Click to expand...
Click to collapse
+1

After flashing this Rom, my data is still at Data/media but not on the default path, what should i do in this case? should i move the data from data/media to new location manually?

calvinleeabc said:
please fix dead links
Click to expand...
Click to collapse
buciupetru said:
Can't download the zip and ftf file, doesnt work, anyone can confirm that? can you reuploading or verify if is everything ok, thx for the work you done.
Click to expand...
Click to collapse
Sorry guys, the server is under a heavy load at the moment... the webserver lost a few workers that ate up much of the cpu time. I've killed them all and restarted the webserver.
IF the problem was caused by that, it's solved now

lethalfriend said:
After flashing this Rom, my data is still at Data/media but not on the default path, what should i do in this case? should i move the data from data/media to new location manually?
Click to expand...
Click to collapse
No need: /data/media IS the 'new' location.

[NUT] said:
Sorry guys, the server is under a heavy load at the moment... the webserver lost a few workers that ate up much of the cpu time. I've killed them all and restarted the webserver.
IF the problem was caused by that, it's solved now
Click to expand...
Click to collapse
thanks:good:efficient

[NUT] said:
No need: /data/media IS the 'new' location.
Click to expand...
Click to collapse
But strangely, my phone isn't detecting the media from the above path, its just showing the pictures form newly created DCIM folder which is on a different location

lethalfriend said:
But strangely, my phone isn't detecting the media from the above path, its just showing the pictures form newly created DCIM folder which is on a different location
Click to expand...
Click to collapse
Ooh... i now see what you mean... you are correct. I'll patch up the flashable package to do it automatically.
For you, use a file explorer to move the contents (skipping the 0 folder) of /data/media to /data/media/0/. Sorry man, i missed that completely on my phone

server stilll unreachable.

[PORT][ROM][BETA-2][4.4.4] MIUI v6 for Android One 1st gen

Hello guys, just sharing my first porting work to u all
Please read this post from first to the end of this post
"Please respect to my work,
I'm doing this fix all alone by
giving up my rest time, quota (since i didnt have wifi), etc..
so dont complain if u find any bugs, or
a lil bit hassle to install it.
if u find any, just report it to me
if it's possible to fix,
i will try to make a patch / troubleshoot updates."
Click to expand...
Click to collapse
NOTE : DO THIS AT YOUR OWN RISK
Changelogs :
ROM :
#> BETA 2 - 20151213
- Fixed META-INF problem, can flash using any recovery now except stock
- Fixed Completely selinux problem
- Fixed Camera and screen issues on other A1 devices (ex Mito Impact a10)
- Fixed Flashlight
- Fixed Bootloop at first time install (dont need to wipe dalvik again)
- Fixed Offline charging
- New kernel and ramdisk
- some other patches and minor fix
#> BETA 1 - 20151211
- Fixed RIL (only single sim for now)
- Fixed Launcher icons
- Fixed Dialer and Contacts FC
- Fixed Change wallpaper FC
- Fixed some layout
- Fixed MTP
- Fixed Themes FC
- some minor fix and patches
#> DevBuild 1 (Tester Only)
- Initial Release
- All Devices standard features working except (for now) :
RIL (SIM Network/Data Cellular)
- Some of apps fc
Click to expand...
Click to collapse
PATCH :
#> Patch for BETA 2 - 20151220
Fix LED notification
New sqlite_jni [test] : tell if u got any huge sqlite problem in the {logcat} than before patch
Fix weather app
#> Patch for BETA 1 - 20151211
Patched services.jar to disable apps verify
DownloadProvider fix
Click to expand...
Click to collapse
Bugs :
- DUALSIM
- Launcher 4x5 layout bug (use another launcher if u want)
- Google play services sometimes fc. Due to unexpected sqlite problem sometime
- Media stopped working after 5-10 seconds gplay services fc so cant take screenshot and gallery become empty, and in some cases taking screenshot while opening screenshot folder using miuigallery (u need to reboot the phone or wait approx 10-30min)
- Font changing in theme app only works for miui's default browser
- tell me other
Click to expand...
Click to collapse
Download links :
ROMs :
MIUI6_20151213_BETA 2
MIUI6_20151211_BETA 1
GApps :
GApps_miui6_optimized_edition
Patchs :
BETA 2 :
miui6_patch_beta2_20151220
BETA 1 :
miui6_patch_20151211
BOOTLOOP PATCH : miui6_patch_after_flash
BOOTLOOP PATCH : miui6_patch_after_boot
Installation Procedure :
1. Go to recovery
2. Wipe data, cache, system
3. Flash the rom
4. Flash miui gapps
5. Flash the patch (if any)
6. Reboot.
If u are updating from BETA 1 to BETA 2, i recommend to do a wipe data or clean flash to avoid some unexpected issues
BETA 1 Notes :
For you who gettings bootloop at last time, try this :
1. Download these two bootloop patch
2. Rewipe your phone (data,cache,system)
3. Flash the rom, then flash gapps, after that reboot to recovery mode
4. Flash the miui6_patch_after_flash
5. Reboot. Wait till its booting to homescreen (approx 6-10mins)
6. After finishing the setupwizard, go back to recovery
7. Flash the miui6_patch_after_boot
8. Reboot. And ur done
After booting and finishing the setup wizard (and done flashing the bootloop patch if u got bootloop), set selinux to permissive, set using kernel adiutor (go to plugins, download selinux plugin, set to permissive), enable apply on boot
After booting to homescreen u can reput your 2nd card now. but remember its will still didnt detect your 2nd card
Troubleshoot :
1. How to enable root access?
- Open security app, choose permissions, root access .. there u go (make sure ur root apps already asked for root first to show it on there)
2. How to disable warn when want to install app?
- Open Privacy, choose device administration, change in unknown sources from ask to allow
3. How to make my phone mtp detected?
- Unplug ur usb, open miui default file explorer, select phone, wait till its complete loading, then connect ur usb
4. Google apps or keyboard is force closing how to fix?
- Use my miui6_gapps
5. Titaniumbackup is restarting after grant root access, how to fix?
- Update your current tb to version 7.2.1.2 or latest
6. Cant install apps from PS, says no free storage, how to fix?
- Flash the download provider fix
7. Cant install apps from my sdcard, says no free storage, then after i try it its says install failed
- Set your phone selinux to permissive, then use root ex delete the package folder in data/data .. ex Im failed to install bbm, delete the com.bbm folder
8. Cant import theme from sdcard, what to do?
- The new MIUI at default doesnt allow you to apply theme which not from their store, but try other theme, theres some of theme still can be imported
9. Issues with downloading, how to fix?
- Turn off the xunlei download engine at download - settings, also set the limit to unlimited
10. Navbar is too small, how to fix?
- If u want alternative, use MiPop 2.0 .. im reduced its size due to fix some of layout bugs. To remove the navbar add "qemu.hw.mainkeys=1" without " in the bottom of the build.prop then push Mipop.apk to system/priv-app
11. How to show messenger chat heads?
- Download app-ops app from playstore, install then reboot, after that search for messenger permission, enable the draw over blabla permission : thanks to Kishan Kumar for the guide
How to Install Video Review, thanks to Sounak Pal :
Here
To appreciate my hard works, you can consider giving me some donations by :
Giving some steam wallets : nteztaz
or if u at Indonesian country, u can send me some credit balance to buy quota,
msg me for my call number
Credits :
[email protected] for the rom base
Yusuf Maulana for the idea of porting from 'based cm11'
Sounak Pal for the video review
All my Tester
All Android One users
Me (TezTaz Si Rama)

A huge thanks for this Rom was waiting for different ui.
It would be great if u will provide some screen shots

Screenshots

I havent found any fc
Hoping that the sim bug will be fixed soon

I dont mind using the Single SIM as I use it for single sim most of the time. Thank you for sharing it here. I'm downloading it now.

an awesome rom
This is the best rom I have ever used on my Sparkle V. Very smooth ,
but I found a bug - while backing up data on local storage the phone hangs and reboots itself in a minute, but that's not a major issue.:good:

guys, I tried flashing, but failed. ,
- first I tried wipe everything, and then flash. But flash or rom failed, giving sole softlink issue. I tried multiple times, but failed. Finally, fixed issue by having another 4.4.4 rom installed first and then flashing this rom without wiping system
- once flash was successful, I rebooted device, but it keeps looping wihout booting up. OP suggested multiple iterations of (battery remove, goto recovery, wipe dalvik, boot) , but I am in my 7th attempt and device not booting still.
How many times you guys had to wipe dalvik? Very much anxious to test this MIUI rom !

Flash why philz
Do not flash gapps it was bootlooping

yadavdharmendar said:
Flash why philz
Do not flash gapps it was bootlooping
Click to expand...
Click to collapse
thanks @yadavdharmendar, I am installing from philz, and I avoided installing gaps as well. Still not luck. I get Simlink error.
I am coming from FIUI rom. Not sure if that matters (as anyway I am wiping everything before starting rom flashing).

I was on Fiui too
Then i flash cm11 ,then miui

yadavdharmendar said:
I was on Fiui too
Then i flash cm11 ,then miui
Click to expand...
Click to collapse
thanks! But why you installed CM11 first before installing Miui. OP didn't asked for it. Just curious to know!
And where you got CM11 from? From Cyanogenmod download page for "sprout"?

mobilepgk said:
guys, I tried flashing, but failed. ,
- first I tried wipe everything, and then flash. But flash or rom failed, giving sole softlink issue. I tried multiple times, but failed. Finally, fixed issue by having another 4.4.4 rom installed first and then flashing this rom without wiping system
- once flash was successful, I rebooted device, but it keeps looping wihout booting up. OP suggested multiple iterations of (battery remove, goto recovery, wipe dalvik, boot) , but I am in my 7th attempt and device not booting still.
How many times you guys had to wipe dalvik? Very much anxious to test this MIUI rom !
Click to expand...
Click to collapse
Its not davlick issue it's just meta inf folder bug
Just open ROM zip and delete meta inf folder and replace it from any downloaded sprout ROM zip just copy meta inf folder frm there and paste it in miui ROM n u r done just do a clean install n w8 for 5 mins

teztaz--v3 said:
Hello guys, just sharing my porting work to u all
"Please respect to my work,
I'm doing this fix all alone,
so dont complain if u find any bugs,
if u find any, just report it to me
if it's possible to fix,
i will make a patch updates."
Changelogs :
Bugs :
Download links :
ROMs :
Here
MIUI GAPPS :
soon
Patchs for Download Provider :
Here
Installation Procedure :
1. Remove your 2nd sim card, then go to philz recovery or LATEST (2.8.7.x) TWRP recovery (darkplay)
2. Wipe data, cache, system (or just use the 'clean to install rom' function)
3. Flash the rom
4. Flash miui gapps
5. Flash patch
6. Reboot, wait till 6 mins, pull your phone battery, then goto recovery and wipe dalvik cache, then reboot*
7. After booting and finishing the setup wizard, set selinux to permissive, set using kernel adiutor, enable apply on boot
*do it again until the progress bar bottom of the screen showing
Troubleshoot :
1. How to enable root access?
- Open security app, choose permissions, root access .. there u go (make sure ur root apps already asked for root first to show it on there)
2. How to disable warn when want to install app?
- Open Privacy, choose device administration, change in unknown sources from ask to allow
3. How to make my phone mtp detected?
- Unplug ur usb, open miui default file explorer, select phone, wait till its complete loading, then connect ur usb
4. Google apps or keyboard is force closing how to fix?
- Change your gapps, use pico/nano gapps for now
5. Titaniumbackup is restarting after grant root access, how to fix?
- Update your current tb to version 7.2.1.2 or latest
6. Cant install apps from PS, says no free storage, how to fix?
- Flash the download provider fix
7. Cant install apps from my sdcard, says no free storage
- Wipe data your phone, reflash again, after boot set selinux to permissive
Credits :
[email protected] for the rom base
Yusuf Maulana for the idea of porting from 'based cm11'
All my Tester
All Android One users
Me (TezTaz Si Rama)
Click to expand...
Click to collapse
not downloading rgt now....will instead wait for another a bit stable build...a salute to your work...hope ur working on fixes...already pressed thanx button...keep going boy...

Thanks all. Installed cm11, then installed ROM with the patch, and avoided flashing any gapps. It worked! Just one bootloop, which went away after wiping dalvik.
Thanked OP!!
BTW, any ways to make the navigation buttons look big. And possibly increase bar height?

about 2nd sim
bro plz plz get 2nd sim working.
thanks for your work and you are awesome.

@teztaz--v3
how to make navigation bar transparent ?
and a big thanks for your beautiful awesome work

no FCs seen so far!! Looks perfectly usable as daily rom.
Just one problem seen :
Can not install Google maps. Says insufficient space, which is strange. Also failed to install Link2SD. Tried even installing from ADB, gave error INSTALL_FAILED_UID_CHANGED. Hope Miui is not blocking it.

Every thing is fine bro its super rom but I can't move apps to SD card

Thanks bro! gr8 work! bt can u make e single zip with all fixes? people will get confused with so many patches

nsytechno96 said:
bro plz plz get 2nd sim working.
thanks for your work and you are awesome.
Click to expand...
Click to collapse
B'coz this ROM is based on CM11, it's impossible to get multi sim working

[rom] lineageos 14.1

loaded this on my old phone, seems to work
https://drive.google.com/open?id=0B0...jNKZW1WQ3ExOWs

^ edited to include link

-- see below for update --

Bluetooth isn't working. The message bluetooth share stopped working appears as soon as I switch the toggle. Just letting you know. Great work with this build, I was able to make calls and send messages over lte on AT&T. Really great so far

fixed bluetooth: https://drive.google.com/open?id=0B08utbHfUyw6MjNKZW1WQ3ExOWs
source of fix:
https://github.com/LegacyHuawei/and...mmit/e1564746378cfe5e7b30bec65e626c3edebebacc

Thanks, that fixed Bluetooth, also mtp notified me that it stopped working the moment I make my sd marked as portable storage, I'll check if that occurs again when I try to transfer from my PC. No other problems so far
Update - otg and mtp working fine

source?
Thanks muchly for doing this. Is the source that you used to build the zipfile available someplace I could download it?

plasticchris said:
loaded this on my old phone, seems to work
https://drive.google.com/open?id=0B0...jNKZW1WQ3ExOWs
Click to expand...
Click to collapse
File no longer available?

Demasiados bugs el inestabilidad reinicios a cada rato

The VoIP doesn't seem to work. I tried the stock stack and Fongo. On connecting a call the I can hear the other side, but my voice is muffled/crackly and very very quiet. If I switch to the external speaker everything works but switching back causes the same problem. To me it seems like a sound routing problem.

protectivedad said:
The VoIP doesn't seem to work. I tried the stock stack and Fongo. On connecting a call the I can hear the other side, but my voice is muffled/crackly and very very quiet. If I switch to the external speaker everything works but switching back causes the same problem. To me it seems like a sound routing problem.
Click to expand...
Click to collapse
I had the same problem.
You need change those parametrs at build.prop:
use.dedicated.device.for.voip=true.
use.voice.path.for.pcm.voip=true.
change those parameters to "false"
At CianogenMod12.1(at this firmware Voip work fine), this parametrs are missing, maybe need simply deleting at Lineage 14.1. Today I use my smartphone whith those changes, problem resolved.

krv163 said:
I had the same problem.
You need change those parametrs at build.prop:
use.dedicated.device.for.voip=true.
use.voice.path.for.pcm.voip=true.
change those parameters to "false"
At CianogenMod12.1(at this firmware Voip work fine), this parametrs are missing, maybe need simply deleting at Lineage 14.1. Today I use my smartphone whith those changes, problem resolved.
Click to expand...
Click to collapse
Worked like a charm. Too bad the phone has started having a battery charge issues. I had it dismantled for the last three weeks. Reassembled to test. I will have to keep those settings in mind for other VoIP android phones.

Could you post the link of your device tree, kernel, vendor and any other repos that you used?

krv163 said:
I had the same problem.
You need change those parametrs at build.prop:
use.dedicated.device.for.voip=true.
use.voice.path.for.pcm.voip=true.
change those parameters to "false"
At CianogenMod12.1(at this firmware Voip work fine), this parametrs are missing, maybe need simply deleting at Lineage 14.1. Today I use my smartphone whith those changes, problem resolved.
Click to expand...
Click to collapse
What recovery you used?

Lineage-14.1-20200227-UNOFFICIAL-mb886
Lineage14.1 unoficial and TWRP 3.3.1-0 for the Atrix HD. It as only been tested on a Razr M. I will make an official thread in the development section if there's enough interest.
I am not responsible for bricked devices, loss of data, dead SD cards,
* loss of hair, thermonuclear war, or you getting fired because the alarm app
* failed. Please do some research if you have any concerns about features included
* in this ROM before flashing it! YOU are choosing to make these modifications, and
* if you point the finger at us for messing up your device, everyone will laugh at
* you and I will deny any wrong doing or responsibility.
Procedure
NB: You must format your Data and Cache partitions as F2FS
Download the latest PICO or NANO GApps from OpenGapps
Backup your internal SD Card, off of the device eg USD or Hard Disk
Boot to TWRP
Make a nandroid backup, and ensure this backup is not on the device itself
Format your data partition and cache partition to F2FS (do NOT post for instructions
on how to do this on this thread!)
**Note: Touch still not working properly so you MUST use a mouse.
Wipe Cache , System & Dalvik-Cache
Flash the ROM Zip
Flash Gapps ARM -> 7.1
Wipe cache and dalvic
Done - Reboot to [System]
Wait...
Not Working:
You tell me
Rom: https://www.androidfilehost.com/?fid=4349826312261733183
MD5sum: https://www.androidfilehost.com/?fid=4349826312261733184
Recovery: Here
***Don't forget a mouse***
All work is done here: https://github.com/Wheels564
Screenshot https://www.androidfilehost.com/?fid=4349826312261715435
Edit: Added recovery download to OP

Wheels564 said:
Here is a test version of lineage14.1 unnoficial and TWRP 3.1.1-0 for the Atrix HD. It as only been tested on a Razr M. I do not have enough posts to make a new thread so I'm adding it here.
I am not responsible for bricked devices, loss of data, dead SD cards,
* loss of hair, thermonuclear war, or you getting fired because the alarm app
* failed. Please do some research if you have any concerns about features included
* in this ROM before flashing it! YOU are choosing to make these modifications, and
* if you point the finger at us for messing up your device, everyone will laugh at
* you and I will deny any wrong doing or responsibility.
Procedure
NB: You must format your Data and Cache partitions as F2FS
Download the latest PICO or NANO GApps from OpenGapps
Backup your internal SD Card, off of the device eg USD or Hard Disk
Boot to TWRP
Make a nandroid backup, and ensure this backup is not on the device itself
Format your data partition and cache partition to F2FS (do NOT post for instructions on how
to do this on this thread!)
Wipe Cache , System & Dalvik-Cache
Flash the ROM Zip
Flash Gapps ARM -> 7.1
Wipe cache and dalvic
Done - Reboot to [System]
Wait...
Rom: https://www.androidfilehost.com/?fid=4349826312261715411
MD5 sum: https://www.androidfilehost.com/?fid=4349826312261715412
Recovery: https://www.androidfilehost.com/?fid=4349826312261715413
All work is done here: https://github.com/Wheels564
Screenshot https://www.androidfilehost.com/?fid=4349826312261715435
Click to expand...
Click to collapse
does not work on atrix hd. touch doesnt work.
---------- Post added at 11:35 PM ---------- Previous post was at 11:32 PM ----------
jerryspring said:
does not work on atrix hd. touch doesnt work.
Click to expand...
Click to collapse
on other roms that i have flashed that required to format to f2fs i successfully flashed with 6059 philz f2fs recovery without changing that options.. wouldnt your rom flash on that recovery as well?

jerryspring said:
does not work on atrix hd. touch doesnt work.
---------- Post added at 11:35 PM ---------- Previous post was at 11:32 PM ----------
on other roms that i have flashed that required to format to f2fs i successfully flashed with 6059 philz f2fs recovery without changing that options.. wouldnt your rom flash on that recovery as well?
Click to expand...
Click to collapse
I'll see if I can build one with the old touch driver. Touch worked fine on the Razr M both in recovery and rom. My Razr HD had the old touch driver but works fine with the new one.
The old Philz recovery probably won't support android 7.1. I'll see what I can do with it when I get time.

Wheels564 said:
I'll see if I can build one with the old touch driver. Touch worked fine on the Razr M both in recovery and rom. My Razr HD had the old touch driver but works fine with the new one.
The old Philz recovery probably won't support android 7.1. I'll see what I can do with it when I get time.
Click to expand...
Click to collapse
Yeah. Got status 7 using philz f2fs recovery

TWRP and Lineage
New builds up:
Read op for info on rom and twrp.

lineage-14.1-20200227-UNOFFICIAL
New build up
lineage-14.1-20200227-UNOFFICIAL-mb886
Changelog
Bluetooth fixed
Rom: https://www.androidfilehost.com/?fid=4349826312261733183
MD5sum: https://www.androidfilehost.com/?fid=4349826312261733184
Don't forget to read the op about TWRP https://forum.xda-developers.com/showpost.php?p=81672185&postcount=15

[CLOSED] [STOCK] [DOWNGRADE] [08-Mar] Revert back to older firmware (v309 till v339) via TWRP

Code:
[B]NOTE : [/B]PROCEED AT YOUR OWN RISK. Guide tested successfully to flash [U]Stock WW-15.2016.1805.309[/U] from [U]Stock WW-15.2016.1809.331[/U] on primary device. Also I will try to help out in case of issues.
This thread is for those who are on stock rooted rom with TWRP installed and want to have system downgrade.
How to ,
Backup important app data like whatsapp chats etc.
Download older modified system update file - FROM THIS POST.
Download decrypt.zip from HERE.
Download Magisk from HERE .
Reboot to TWRP.
Go to wipe and select swipe to Factory reset.
Flash the ROM file.
Flash decrypt.zip file.
Flash Magisk zip file.
Reboot & Enjoy.
(optional) If you want to boost up by debloating then use this MOD.
(optional) If you want to boost up BATTERY then use this GUIDE.
Remember that it takes a lot of time to create , test and upload these huge files for everyones use. So please hit Thanks! button on the bottom right of the post to keep me motivated
NOTE : ROM works independant of RAM i.e. applicable for 3/4/6 GB variants.
Recommended TWRP : https://androidfilehost.com/?fid=3700668719832241089 by @SagarMakhar.

Thank you soo much ...was really waiting for it..

Question
AVinaSh_S said:
This thread is for those who are on stock rooted rom with TWRP installed and want to have system downgrade.
How to ,
Backup important app data like whatsapp chats etc.
Download older modified system update file - FROM THIS POST.
Download decrypt.zip from HERE.
Download Magisk from HERE .
Reboot to TWRP.
Go to wipe and select swipe to Factory reset.
Flash the ROM file.
Flash decrypt.zip file.
Flash Magisk zip file.
Reboot & Enjoy.
(optional) If you want to boost up by debloating then use this MOD.
Remember that it takes a lot of time to create , test and upload these huge files for everyones use. So please hit Thanks! button on the bottom right of the post to keep me motivated
NOTE : ROM works independant of RAM i.e. applicable for 3/4/6 GB variants.
Recommended TWRP : https://androidfilehost.com/?fid=3700668719832241089 by @SagarMakhar.
Click to expand...
Click to collapse
Thank you so much for the answer Sir AviNash. I've got a question, if I swipe to factory reset, all my downloaded apps would be gone? Or their settings only? I am hesitating to downgrade because I am thinking that it would lost all my downloaded apps including the data. Am I correct sir?

MJorgeAbad said:
Thank you so much for the answer Sir AviNash. I've got a question, if I swipe to factory reset, all my downloaded apps would be gone? Or their settings only? I am hesitating to downgrade because I am thinking that it would lost all my downloaded apps including the data. Am I correct sir?
Click to expand...
Click to collapse
Yes .. factory reset will remove all app setting and app data. You will need to backup appdata on cloud.
Storage data on SD card will not be touched. To be safe .. backup data on Internal Storage as well.

AVinaSh_S said:
Yes .. factory reset will remove all app setting and app data. You will need to backup appdata on cloud.
Storage data on SD card will not be touched. To be safe .. backup data on Internal Storage as well.
Click to expand...
Click to collapse
Now my phone is on v331, and this 331 version is bad,.. worse than the 327, but instead of downgrade to 327, I prefer to wait for your "334 upgrade file for 'UBL-TWRP&Root' user" like you did with the 331
Ty Avinash

Thanks for this

sir,can you give a tutorial to edit firmware updates for flashing on twrp?

AVinaSh_S said:
This thread is for those who are on stock rooted rom with TWRP installed and want to have system downgrade.
How to ,
Backup important app data like whatsapp chats etc.
Download older modified system update file -FROM THIS POST.
Download decrypt.zip from HERE.
Download Magisk from HERE .
Reboot to TWRP.
Go to wipe and select swipe to Factory reset.
Flash the ROM file.
Flash decrypt.zip file.
Flash Magisk zip file.
Reboot & Enjoy.
(optional) If you want to boost up by debloating then use this MOD.
(optional) If you want to boost up BATTERY then use this GUIDE.
Remember that it takes a lot of time to create , test and upload these huge files for everyones use. So please hit Thanks! button on the bottom right of the post to keep me motivated
NOTE : ROM works independant of RAM i.e. applicable for 3/4/6 GB variants.
Recommended TWRP :https://androidfilehost.com/?fid=3700668719832241089 by @SagarMakhar.
Click to expand...
Click to collapse
hi..I've just downgrade to 327.
And your guide is superb, as usual. Everything is smooth. Big thanks!

Wheres downgrade rom file?

simpang said:
Wheres downgrade rom file?
Click to expand...
Click to collapse
Hmmm
Maybe look in post #1
Or just click here

Boomshiva said:
Hmmm
Maybe look in post #1
Or just click here
Click to expand...
Click to collapse
Lol,i cant see..

What's the best version till now, I am on January update but after a day or two the phone stops working and have to restart.

jassalmithu said:
What's the best version till now, I am on January update but after a day or two the phone stops working and have to restart.
Click to expand...
Click to collapse
Latest update 339 is proven to be stable and reliable release. Probably it's your phone hardware issue.
Maybe you can try to clear the cache first. If that does not work then try reset the phone. If still doesn't work then bring it to service center.

THREAD CLOSED on request of OP!

MM2 Android 10 Ported Booting Rom

Android Version : MM2_A10_PORT_REV_Q Easy recovery install.
You should be having proper knowledge of flashing Custom ROM and how to Restore a phone if anything goes wrong.
Take complete backup before taking any action based on this thread. I am not responsible for any action taken by you.
I am just compiling all the information / files available on different websites into this thread, I have patched together with cyber spit, bubblegum, and tape, for a pretty much fully working MM2_A10_PORT_REV_Q running rom. With the help from Mohzuned. I have removed what I believe to be all of the bloat. We worked to modify a working pie vendor. Magisk 19.5 installer is all ready included as well as the modified boot for root access.
All Credit goes to respective developer/s. I request XDA moderator and or Developer of Respective files to let me know if I have forgotten to mentioned (give credit) their name in this thread. The Download Links are given directly from respective Developer/s.
You need the following two files to Test Android 10 / Q on Mi Max 2 (Oxygen). This ROM recovery is ported from the Xiaomi RedMi with many patches and customized from various sources. This ROM maybe Stable enough for your daily use on Mi Max 2. I have access to two MM2 4/64 Global versions using a 1tb sd card one on At&t the other on Tmobile and MOST features I need are currently working.
1a. Treble Mi Max 2 Recovery 3.2.1 https://androidfilehost.com/?fid=5862345805528056270
1b. OrangeFox Recover 10
https://sourceforge.net/projects/ora...n.zip/download
2. MM2_A10_PORT_REV_Q
https://drive.google.com/folderview?id=1KfWqQmi7bN_yXZfgVzxiifWuS2jDozCr
First step:
Start your phone into recovery and Flash a Treble recovery, if already not flashed. Restart into Recovery.
Click Wipe then Advance wipe and clear System, Vendor, Boot, Data, Cache, and Dalvick cache.
Second step:
Now Extract the Downloaded Rom files in Recovery backup folder. You should know where and how to Extract. (Use extract tool for android or pc then copy paste to recovery backup folder.)
Third step:
Click Restore and Select System, Boot, Vendor and Swipe to confirm. Wait for restore to complete. If any errors, Reboot recovery and try again. Or Mount the System, Vendor, Boot and try again. After Restore completes Reboot. Please allow 1-2 Minutes for first boot.
Fourth step:
Flash Gapps , If you want.
What works:
Cell Service, Wifi 5ghz/2.4ghz, HW buttons. * Sound Fixed *
What doesn't work:
We will find out. Fixes and various a10 roms should be popping up soon from Scissordragonboy & Others
Guys, this is far from perfect Android 10 package, But now the door is opened for our lovely Xiaomi Mi Max 2 (Oxygen) for future updates.
If I missed anything in the above, kindly let me know to include. If you make any further updates / patches that makes this ROM more stable / perfect or enables new features, please don't hesitate to message me to include in this thread.
I have an old PC running windows with 8gb max at any one given time, So if you would like to make the recovery image into a flashable zip, I'd be happy to update/add it.
If you can afford it, Im trying to save for a computer from this decade, any help is appreciated
https://www.paypal.me/LiamMcGinnisIv
If you would like to use the boot, vendor, system, or any other files, All I ask is pass on the proper credits. With this we should be able to have many fully functioning android Q in the near future.
Credits : liammc83 | Mohzuned
Original Pie Kernel Source - Hardrock83 (RIP) | beingtejas v5
Any Others Who May Have Been Missed
Best of Luck and Happy Flashing )

Thank you for first android-10 ported rom

Thanks for this will flash now
---------- Post added at 05:29 AM ---------- Previous post was at 04:55 AM ----------
shingers5 said:
Thanks for this will flash now
Click to expand...
Click to collapse
asking for password to boot android???? do i need to wipe before boot as asking for password

Great the first Q os for our lovely MM2, Would love to try it, but can you give a link for gapps cuz it's not available in opengapps.org.
Thanks for all the effort.

shingers5 said:
Thanks for this will flash now
---------- Post added at 05:29 AM ---------- Previous post was at 04:55 AM ----------
asking for password to boot android???? do i need to wipe before boot as asking for password
Click to expand...
Click to collapse
You will need to format internal storage. And also sound is not working.

Thankyou excellent work!
Where is the source code?

liammc83 said:
Android Version : MM2_A10_PORT_REV_Q Easy recovery install.
You should be having proper knowledge of flashing Custom ROM and how to Restore a phone if anything goes wrong.
Take complete backup before taking any action based on this thread. I am not responsible for any action taken by you.
I am just compiling all the information / files available on different websites into this thread, I have patched together with cyber spit, bubblegum, and tape, for a pretty much fully working MM2_A10_PORT_REV_Q running rom. With the help from Mohzuned. I have removed what I believe to be all of the bloat. We worked to modify a working pie vendor. Magisk 19.5 installer is all ready included as well as the modified boot for root access.
All Credit goes to respective developer/s. I request XDA moderator and or Developer of Respective files to let me know if I have forgotten to mentioned (give credit) their name in this thread. The Download Links are given directly from respective Developer/s.
You need the following two files to Test Android 10 / Q on Mi Max 2 (Oxygen). This ROM recovery is ported from the Xiaomi RedMi with many patches and customized from various sources. This ROM maybe Stable enough for your daily use on Mi Max 2. I have access to two MM2 4/64 Global versions using a 1tb sd card one on At&t the other on Tmobile and MOST features I need are currently working.
1a. Treble Mi Max 2 Recovery 3.2.1 https://androidfilehost.com/?fid=5862345805528056270
1b. OrangeFox Recover 10
https://sourceforge.net/projects/ora...n.zip/download
2. MM2_A10_PORT_REV_Q
https://drive.google.com/folderview?id=1KfWqQmi7bN_yXZfgVzxiifWuS2jDozCr
First step:
Start your phone into recovery and Flash a Treble recovery, if already not flashed. Restart into Recovery.
Click Wipe then Advance wipe and clear System, Vendor, Boot, Data, Cache, and Dalvick cache.
Second step:
Now Extract the Downloaded Rom files in Recovery backup folder. You should know where and how to Extract. (Use extract tool for android or pc then copy paste to recovery backup folder.)
Third step:
Click Restore and Select System, Boot, Vendor and Swipe to confirm. Wait for restore to complete. If any errors, Reboot recovery and try again. Or Mount the System, Vendor, Boot and try again. After Restore completes Reboot. Please allow 1-2 Minutes for first boot.
Fourth step:
Flash Gapps , If you want.
What works:
Cell Service, Wifi 5ghz/2.4ghz, HW buttons.
What doesn't work:
We will find out. Fixes and various a10 roms should be popping up soon from Scissordragonboy & Others
Guys, this is far from perfect Android 10 package, But now the door is opened for our lovely Xiaomi Mi Max 2 (Oxygen) for future updates.
If I missed anything in the above, kindly let me know to include. If you make any further updates / patches that makes this ROM more stable / perfect or enables new features, please don't hesitate to message me to include in this thread.
I have an old PC running windows with 8gb max at any one given time, So if you would like to make the recovery image into a flashable zip, I'd be happy to update/add it.
If you can afford it, Im trying to save for a computer from this decade, any help is appreciated
https://www.paypal.me/LiamMcGinnisIv
If you would like to use the boot, vendor, system, or any other files, All I ask is pass on the proper credits. With this we should be able to have many fully functioning android Q in the near future.
Credits : liammc83 | Mohzuned
Original Pie Kernel Source - Hardrock83 (RIP) | beingtejas v5
Any Others Who May Have Been Missed
Best of Luck and Happy Flashing )
Click to expand...
Click to collapse
Oh, great man.

After flashing successful working fine but while phone on but screen is off charging screen not showing,
Sounds are not working. Ringtones not working. Fingers print not tested.
Flashing 10 gaps working fine but camera not installed so used another camera app but not working. Camera screen is black I think camera hardware not contact to app.
Fast charger super charging work fine.
Android system security not work, like miui 11.
Com.quailcom what it is not remember but stop often.
Else Appearance is good speed is Good all over good.
---------- Post added at 09:49 AM ---------- Previous post was at 09:42 AM ----------
And here is working Gapps for Android 10 (every Android 10 ROM supported)
Author: siba
File size: 173.27 MB
Updated: September 25, 2019
Categories: openGaps 10 GApps
https://www.cyanogenmods.org/downloads/nano-open-gapps-for-android-10-arm64/#

Well tested for a brief time as I had to go out, fingerprint isn't working, torch isn't working, no sounds at all ( sounds work fine in earphones). Rest will test later and will report back

I tried to install it.
But not getting on how to install it.
Can anyone brief about the installation process using recovery?
Thank you

sinhapratik.11136 said:
I tried to install it.
But not getting on how to install it.
Can anyone brief about the installation process using recovery?
Thank you
Click to expand...
Click to collapse
Download the zip, extract it, then go to orange fox recovery and make a backup of your current rom. Then boot your current rom and copy the extracted file into Fox>backup>folder>another folder then delete the existing files and paste the copied files and then from the recovery restore the backup.

Na just format data and all good now. ROM still there but all save data gone yes. Working OK for now still too buggy for everyday use but a step in the right direction
---------- Post added at 04:00 PM ---------- Previous post was at 03:56 PM ----------
Recovery and back up your old ROM on micro SD card not internal storage. Format data as need clean partition to flash this or will get password at boot. Extract ROM zip on PC and copy to backup folder in twrp on phone. Then wipe all as stated restore as stated and it will boot

ridershahmir said:
Download the zip, extract it, then go to orange fox recovery and make a backup of your current rom. Then boot your current rom and copy the extracted file into Fox>backup>folder>another folder then delete the existing files and paste the copied files and then from the recovery restore the backup.
Click to expand...
Click to collapse
Thank you for explaining.

1.flashlight doesn't work
2.sometimes so buggy that it restarts automatically.
3.battery led not working.
4.speaker not working.
5.add apps like phone of google
6. Alarm not working

@shivanshgoel said:
1.flashlight doesn't work
2.sometimes so buggy that it restarts automatically.
3.battery led not working.
4.speaker not working.
5.add apps like phone of google
6. Alarm not working
Click to expand...
Click to collapse
Sorry, this is just a hobby, as I retired my mm2s due to missing USA frequency bands.
1> https://play.google.com/store/apps/details?id=cz.nowi.whitescreen like the old android days
2>haven't experienced
3>Not needed, I have a light on my cord.
4>Try headphones ( I haven't, But some report they work )
5>Flash gapps, or install what you like.
6>I don't use phone alarms, If I'd need one, I use my smart watch, or Id use alexa.
Keep in mind most phones don't have a booting A10,
I did what I could on an ancient Asus 901 eee pc netbook.
When time and system resources permit, I will try to fix it up a bit.
But honesty relying on our friend, Mohzuned (Scissordragonboy) , when he finds time, He has access to a super computer, But also he's working on many projects.
Let's all wish him well.

liammc83 said:
Sorry, this is just a hobby, as I retired my mm2s due to missing USA frequency bands.
1> https://play.google.com/store/apps/details?id=cz.nowi.whitescreen like the old android days
2>haven't experienced
3>Not needed, I have a light on my cord.
4>Try headphones ( I haven't, But some report they work )
5>Flash gapps, or install what you like.
6>I don't use phone alarms, If I'd need one, I use my smart watch, or Id use alexa.
Keep in mind most phones don't have a booting A10,
I did what I could on an ancient Asus 901 eee pc netbook.
When time and system resources permit, I will try to fix it up a bit.
But honesty relying on our friend, Mohzuned (Scissordragonboy) , when he finds time, He has access to a super computer, But also he's working on many projects.
Let's all wish him well.
Click to expand...
Click to collapse
Why don't you guys both share that server computer?

sinhapratik.11136 said:
I tried to install it.
But not getting on how to install it.
Can anyone brief about the installation process using recovery?
Thank you
Click to expand...
Click to collapse
First install OrangeFox Recover 10
https://sourceforge.net/projects/ora...n.zip/download
then press file which you want to install like this rom and open as backup its will work

I can not install it by xiaomi max2.
It looks like not good.

hiein521 said:
It looks like not good.
Click to expand...
Click to collapse
Write us an update kernel/vendor yourself, or donate cash towards a computer and it would look better..... FASTER.
In the meantime, consider having patience, most older systems don't even have android 10 booting with RIL. And you realize we don't get paid for our time.
Its comments like this and similar, that make people quite.
Ask hardrock83, beingtejas.....pffft
News update:
Android 10 from original source is being worked on.

hiein521 said:
It looks like not good.
Click to expand...
Click to collapse
For free stuff either be thankful or please be quiet guys. I don't want another good dev to quit the work. Love hardrock beingtejas and liammc83 [emoji3590]
Sent from my Mi Max 2 using Tapatalk