Database Develop

Car mount suggestions?

I am looking for a windshield (suction cup) car mount solution that will charge my Sprint Touch while in the mount/cradle but does not have a built in speaker. My car has bluetooth integrated so I don't need the hands free capability.
Also, my main purpose for the mount will be to run navigation software so I would like the ability for the mount to easily rotate 90 degrees for horizontal or landscape mode.
I've been looking around online but I must be looking in the wrong places...
thanks in advance.

not exactly suction cup window mount, but I use one of the magnetic mounts for mine in my truck. it holds it in place nicely, maintains access to the charging port, can be turned however you want it, and the metal plate on the back is thin enough to not interfere with putting it in and taking it out of the belt holster. if you have a pilot truck stop near you, they sell a nice magnet mount there.

not really aware of any truckstops near my area... kind of looking for something i could order online. thanks for input though

Windshield Mount
I bought one off ebay that mounts to the windshield using a suction cup then you just plug your standard car charger into it. Like this.
http://cgi.ebay.com/NEW-CAR-MOUNT-D...hash=item170237255037&_trksid=p3286.m14.l1318

In the pictures, it looks like the charging port would be covered..

WhiteSoxxx said:
In the pictures, it looks like the charging port would be covered..
Click to expand...
Click to collapse
No, The bottom has prongs on the left and right. The center is open to plug in the charger. This thing does tend to rattle though when the phone isn't in it. It works great with the phone in it.

I just bought this, received it on monday.
http://www.buygpsnow.com/HAiCOM-Cus...-Nova--T-Mobile-MDA-Touch--Dopod-S1__946.aspx
It is so solid. I live in PA, which has some of the worst potholes you can imagine. So far it has not budged, with the phone in it or not. It does landscape really nice as well as vertical.

qwho, how does the HIACOM mount and what does it mount to?
kenper, does that suction cup stay attached pretty well? I'd hate to see my Touch go crashing to the ground... I'd probably cry.

I think i'm gonna get the one QWHO has for 2 reasons. It looks alot less bulky and it is custom made to fit the touch. So what did you end up getting?

It's a not suction cup but I have one in my car and truck. It swivels for everything you will need. You will need to but a mount off the website as well for your particular vehicle.
http://www.proclipusa.com/default.asp

rube740 said:
I think i'm gonna get the one QWHO has for 2 reasons. It looks alot less bulky and it is custom made to fit the touch. So what did you end up getting?
Click to expand...
Click to collapse
Yea, I think I am going to try the one QWHO listed as well.. It's reasonably priced and is apparently sturdy. Wish I could find a mount that had an integrated charger (so that I wouldn't have to plug the phone in seperately of the mount).
Anyone see a mount like that, similar to say an ipod dock?

Suction mount for Touch
kenper said:
I bought one off ebay that mounts to the windshield using a suction cup then you just plug your standard car charger into it. Like this.
http://cgi.ebay.com/NEW-CAR-MOUNT-D...hash=item170237255037&_trksid=p3286.m14.l1318
Click to expand...
Click to collapse
I bought this....and at 5.00 I was really suprised...it bends to the shape I want, holds extremely well, and has padded sides. Plus, because it has a ratched style holder, it actually will hold other phones. My touch fits like a glove and it makes GPS navigation great! I highly recommend this holder..

Buyer beware folks...
I have my touch for about a month. I bought a gooseneck windshield mount on ebay and it is already broken....the bendable metal broke off.
I am currently going for another type without the gooseneck, probably the Haicom

qwho said:
I just bought this, received it on monday.
http://www.buygpsnow.com/HAiCOM-Cus...-Nova--T-Mobile-MDA-Touch--Dopod-S1__946.aspx
It is so solid. I live in PA, which has some of the worst potholes you can imagine. So far it has not budged, with the phone in it or not. It does landscape really nice as well as vertical.
Click to expand...
Click to collapse
Just got this in the mail yesterday and it works great.
Very sturdy and easy to adjust to different positions. Thanks qwho.

kenper said:
I bought one off ebay that mounts to the windshield using a suction cup then you just plug your standard car charger into it. Like this.
http://cgi.ebay.com/NEW-CAR-MOUNT-D...hash=item170237255037&_trksid=p3286.m14.l1318
Click to expand...
Click to collapse
Think this is similar to this one I found: http://www.dealextreme.com/details.dx/sku.2029
This place has Free shipping
Just wondering for people who own this. Hows the accessability to the plug on the bottom of the phone, do the legs get in the way?

I ordered one of these on ebay:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's cradle style so the charger is built in. Rotates either way without much effort, and stays in place well. I believe the model number is htchol012.

Yes the one I posted was a suction cup one. Still works great. In fact I was recently in a car wreck, hit on the front right side, opposite of where I had it mounted. Didn't budge! Don't worry, I'm ok.
For charging, I actually plugged in a car cigarette port extender to a 120v socket converter, which my wall charger for my phone is plugged into, all under my seat. I then ran the charger cord up the insulation in the door and it comes out of a seam right by my phone's mount. It is pretty clean and works really nice. So even though it doesn't have a built in charger in the mount, it now works like one if I want it to.

sci05 said:
Think this is similar to this one I found: http://www.dealextreme.com/details.dx/sku.2029
This place has Free shipping
Just wondering for people who own this. Hows the accessability to the plug on the bottom of the phone, do the legs get in the way?
Click to expand...
Click to collapse
I bought two of those back in the spring - one for the car, and one for my desk. Plenty of room for the USB, so synch/charging is fine. It's very solid, quite flexible, and easy to rotate.
I went this route for my desk, because I couldn't justify the expense of a cradle (I can plug-in the USB myself), and since I use MyMobiler, I really don't 'touch' the screen while it's docked.
DealExtreme isn't the fastest (everything ships from Hong Kong), but they've got good prices, and I've had good luck with everything I've purchased.

Windshiled Mount
Picked this one up form eforcity for $.99 it works really well and is easy to use with the touch or anything els you feel like mounting up there
http://www.eforcity.com/swivel-windshield-phone-holder-for-nokia-n95-cnokn95xph02.html

WhiteSoxxx said:
I am looking for a windshield (suction cup) car mount solution that will charge my Sprint Touch while in the mount/cradle but does not have a built in speaker. My car has bluetooth integrated so I don't need the hands free capability.
Also, my main purpose for the mount will be to run navigation software so I would like the ability for the mount to easily rotate 90 degrees for horizontal or landscape mode.
I've been looking around online but I must be looking in the wrong places...
thanks in advance.
Click to expand...
Click to collapse
Try Scoche, i think thats how it is spelled. I just picked up one from walmart earlier today. They are on clearance right now. There are 2 models that are 20.00 a pieces. One is a suction cup , got longer flex neck , and the other one has a base where you would put in in your cup holder + it came with stickies to stick it to something. It works pretty good. Get it while they still have them. They are located in the GPS section ni walmart.
oh yeah, I got the one with the base that goes into the cup holder.

Docks

I will need to switch to Verizon within the next few months (due to work reasons). I am currently using a Nexus One on TMobile and plan to get the Droid Incredible on Verizon when I switch.
I am waiting patiently for root access to be gained but also had some other concerns before switching. A main concern is that I have not heard mention of car/home docks for the device.
I currently own the car and home docks for the Nexus One and use them regularly. I am hoping the Incredible will also have a nice docking system like this.

I need a dock and a car mount, too! I have to ask, but does N1 stuff work with DI?

syntrix said:
I need a dock and a car mount, too! I have to ask, but does N1 stuff work with DI?
Click to expand...
Click to collapse
no.........

I just purchased a general use windshield mount from best buy which works pretty well on the Incredible.

I would suggest ProClipUSA they offer a wide variety of windshield mounts and you can just swap out the device holder if you carry more than one item with you or you change phones often.

RaptorMD said:
I would suggest ProClipUSA they offer a wide variety of windshield mounts and you can just swap out the device holder if you carry more than one item with you or you change phones often.
Click to expand...
Click to collapse
This issue, for me, is not holding the device. I like having a car dock like the Nexus One because it provides integrated charging functionality. I do not want to fiddle around with an extra adapter and plugging in my device. I want to be able to drop my device into the dock and have it do what I want it to do
Also, the N1 car dock launches Car Home upon docking. Just perfect.

I got a factory windshield mount today.
It's pretty slick. It's a clip in, belt holder, but the back of it allows it to mount to the neck of the window piece.
There's even a cutout in the holder so you can videos while you drives
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

syntrix said:
I got a factory windshield mount today.
It's pretty slick. It's a clip in, belt holder, but the back of it allows it to mount to the neck of the window piece.
There's even a cutout in the holder so you can videos while you drives
Click to expand...
Click to collapse
that also allows you to use street view with augmented reality in Google Maps, but your right, it makes for a great use to take car video
i don't know if augmented maps is available in the US just yet though
see augmented reality example below:

That would be perfect if a charger was built in.

Here come cradle docking for Verizon Incredible if anyone interest!
http://www.emobile-accessories.com/products_cradle_htc_incredible.html

tonyfung820 said:
Here come cradle docking for Verizon Incredible if anyone interest!
http://www.emobile-accessories.com/products_cradle_htc_incredible.html
Click to expand...
Click to collapse
I wonder how that's going to work when the charging connector is not on the bottom.

Devildog8791 said:
I wonder how that's going to work when the charging connector is not on the bottom.
Click to expand...
Click to collapse
It's not, unless there's a side manual plug in type port!

Currently own the car dock mentioned in the thread, not overly impressed with it, but maybe I didnt bother to take the time to make it work. Came from the droid dock, which went where you put it and stayed there, especially helpful for when you have to plug it in. This dock has 3-4 articulated points that dont work so hot, then the fact that its actually a holster "attached" to the actual dock through a quarter inch piece of plastic adds another element of instability to the system. Tightening the joints does not help much, the holster clip still rotates freely and overall makes plugging the phone in while docked a major pain, in most cases requiring both hands to hold the phone still enough to plug it in. The window mount also leaves something to be desired, after dumping my incredible on the floor for the 3rd time, I gave up on the thing. I know how to apply suction mounts and this one falls well short, maybe I just got a bad one or something, but it will not stay on the windshield while the weight of the phone is on it. Overall, threw it away because I wanted just a car dock, if I wanted a holster I would have bought a holster. If it had been incorporated into the mount in a better way to give more stability to the dock I would be alright with it.

The belt clip, to me, is a huge feature. Don't need it? you just leave it clipped to the window mount.
I'm on the other side of the fence... to me it works great, has never fallen off my window, and has been very stable! It's better than the motodroid dock imho (sans the sideways orientation via magnets that the DI lacks).
When one comes out that has a charging port that you can dock to, I'm getting it! Isn't seidio working on one? Maybe it was another company?

You guys might want to try one of those universal grip holders. I don't really care for things hanging off my windshield, so I had an arkon SM429-SBH mega grip attached to the arkon air vent mount and it worked out really good with my G1. I tried putting my friend's Incredible in there and it fits, no blocked ports. they have a windshield mount too, if that's your thing.

So far all of the Incredible docks suck.
Unfortunately there is no car or home dock for the Droid Incredible that is nearly as good as the docks for the Nexus One. This is a sad fact of Incredible ownership.
It seems that iPhones get the best accessories.

I use the factory windshield mount, and I just ordered the cradle featured in this link, http://www.oriongadgets.com/HTC-Dro...radle-with-2nd-battery-support-pid-11366.html

spotmark said:
I use the factory windshield mount, and I just ordered the cradle featured in this link, http://www.oriongadgets.com/HTC-Dro...radle-with-2nd-battery-support-pid-11366.html
Click to expand...
Click to collapse
I have a similar mount I bought on ebay (here), and while it works, the phone sits completely vertical, 90 degrees to the desktop. Not a very comfortable viewing angle, lol. I may get one of those like you bought, as it looks like it's held a bit better than the stand I have. I definitely don't mind plugging the phone in, as I have to do it anyway...
As for car docks, there is one company who has a powered doc. Proclip has this mount, but you have to purchase the attachment point for your vehicle seperately, and the price rolls up pretty fast (for my truck, it was 109 before shipping, so I'm holding off on it for now). Nice thing is though that you can buy a version of it that wires into the vehicle, so you can hide the cabling a bit better than the chargers we use now.
I'm going to try to get some pictures of my desktop mount today or tonight, but I think it's going to require some modification to make it work how I wanted it to.

spotmark said:
I use the factory windshield mount, and I just ordered the cradle featured in this link, http://www.oriongadgets.com/HTC-Dro...radle-with-2nd-battery-support-pid-11366.html
Click to expand...
Click to collapse
once you get your dock can you please let me know how it works out. maybe even some picks. this looks like this may be the one for me.

tonyfung820 said:
Here come cradle docking for Verizon Incredible if anyone interest!
http://www.emobile-accessories.com/products_cradle_htc_incredible.html
Click to expand...
Click to collapse
Wow... you can just smell the sketchy-ness. Must be a new olfactory add-on for Chrome I didn't know I installed.

Car mount for note 2 AND gs3?

Hey guys. Ive looked and there are a few threads but nothing seems conclusive as to what is the best choice for a car mount that will fit the note 2 and also work with the s3.
I want a strong suction and something that will hold the phones steady for use as a gps buy not block the screen and must allow for the car charger to be plugged in to the phone.
Need two so preferably something that won't break the bank.
Thanks.
Sent from my SPH-L900 using xda premium

http://www.shoppingsquare.com.au/p_..._Holder_for_Smart_Phones_PDA_GPS_Mobile_Phone
ive got one of these. it opens wide enough to hold my note 2 with my chunky heavy duty case. enough suction force to not wobble either. but only really seems to work on windscreens. wont work on the faux leather dash in my honda civic, but will work on plastic dashes.

I went with the iBolt xProDock for my Note 2. It fits the GS3 as well and works with cases. http://forum.xda-developers.com/showthread.php?t=1910428 or http://amzn.com/B00AOCSFYC
I love it. It is super easy to insert/remove the phone and it holds it very solidly. I've had it a month and I only suctioned it one time. It shows no signs of weakening. I think the price is definitely worth it.

supyo said:
I went with the iBolt xProDock for my Note 2. It fits the GS3 as well and works with cases. http://forum.xda-developers.com/showthread.php?t=1910428 or http://amzn.com/B00AOCSFYC
I love it. It is super easy to insert/remove the phone and it holds it very solidly. I've had it a month and I only suctioned it one time. It shows no signs of weakening. I think the price is definitely worth it.
Click to expand...
Click to collapse
seems awfully expensive for something with 3.5/5 rating. I think I prefer the clip posted above. i'm going to try to find it locally if not i'll order online.
if there's anything else that would be better please suggest it!

Got the mountek cd slot holder. Couldn't be happier. Doesn't block the road and looks almost like a 2din receiver. Oh super stable too. My old suction one would shake so much and it would be hard to reach while driving

I use the official Samsung Galaxy Universal Suction Car Mount Kit for Samsung Galaxy Phones available from Amazon US. I paid £22 for it delivered to the UK. Very solid, works well with my Galaxy Nexus, S2 and iPhone. Reviews suggest it does work with the Note 2 as well.
You will need to purchase a car charger though, but cannot fault it at all.

Souai said:
http://www.shoppingsquare.com.au/p_..._Holder_for_Smart_Phones_PDA_GPS_Mobile_Phone
ive got one of these. it opens wide enough to hold my note 2 with my chunky heavy duty case. enough suction force to not wobble either. but only really seems to work on windscreens. wont work on the faux leather dash in my honda civic, but will work on plastic dashes.
Click to expand...
Click to collapse
I got the same car mount and reviewed it here with pictures:
http://forum.xda-developers.com/showpost.php?p=37487154&postcount=49
The only difference, it was from ebay shipped for only $3.95. Took a little over a week to get here, and it's a fantastic car mount that will hold any phone.

Exomount 2!
I own a few of the Exomounts and one of their newest, the Exomount 2. It is easily the best I have tried as far as a universal type mount.

http://www.arkon.com/Galaxy S III/megagrip-galaxy-s-3-sticky-dash-mount.html
My girlfriend uses this in her 2011 Scion with her GS3. It will also fit the Note 2 with most cases. If you have a giant Otterbox case, it'll be a tight fit. I like this mount because it sticks to the dash and can be adjusted to be around the level of an air vent mount. You can adjust it to different heights and even use it on the windshield.
Her Scion has a textured dash and it hasn't come off in 3 months. Good mount, imo.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

thanks for the link. I guess I should have updated the post to mention I already ordered mine.
ended up going with a clip style holder, I like the design more and I want to use the phones horizontally, which the clip seemed to be sturdier at holding than this kind of mount.
let's hope its good!

Max_Pain said:
thanks for the link. I guess I should have updated the post to mention I already ordered mine.
ended up going with a clip style holder, I like the design more and I want to use the phones horizontally, which the clip seemed to be sturdier at holding than this kind of mount.
let's hope its good!
Click to expand...
Click to collapse
Since N2 has a big screen, I like to mount it in portrait mode more than landscape for GPS navigation. It lets me look more further ahead.
Sent from my SGH-T889 using xda app-developers app

Shady Gambino said:
http://www.arkon.com/Galaxy S III/megagrip-galaxy-s-3-sticky-dash-mount.html
My girlfriend uses this in her 2011 Scion with her GS3. It will also fit the Note 2 with most cases. If you have a giant Otterbox case, it'll be a tight fit. I like this mount because it sticks to the dash and can be adjusted to be around the level of an air vent mount. You can adjust it to different heights and even use it on the windshield.
Her Scion has a textured dash and it hasn't come off in 3 months. Good mount, imo.
Click to expand...
Click to collapse
Arkon makes some of the most durable car mounts! I have this Megagrip since 2.5 years using it with Droid X and now Note 2. What I'm very excited about is their upcoming Slim-Grip Ultra mount that can fit anything from Note 2 to Nexus 7. I talked to Arkon customer support and they mentioned it will be available in a few weeks. Once I get it - will review it here!

The best ones are from ibolt..... check its Web Page. .. !!
http://www.ibolt.co/ibxs-33603
Sent from my SGH-T889V using xda app-developers app

Personally I the Breffo Spiderpod, I know its not a car mount but works a treat. just shape it to what you want. Mine uses the vents to hang on, been using it for 2 months now. My Note 2 has never come out, and I just slid it in and out even fits a treat with my flipcover.
http://www.amazon.co.uk/Breffo-Spid...19K4/ref=sr_1_1?ie=UTF8&qid=1360079702&sr=8-1

The Samsung i9300 official one works perfectly for me - fits my Note 2 with case, and is also sold as S3 compatible (and in fact I've tried mine with an S3 and works fine). Solid, has never fallen off my windscreen, and I'm just converting it at the moment to have a fixed power plug I can slot the phone on to, though that's probably not an option if you want to use the 2 phones with it.

I second the IBolt for Note2. I have been waiting for it to be released for months now and it is finally out. Although you have to wait for the charging cable until March.
It is built very very well, mounts to windshield, dashboard and has an optional permanent mount bracket also. My favorite part is the phone goes into Dock mode once attached. I have this mount for the GS3 and it is amaizing. Before purchasing it for the S3 i went through three seperate mounts from Best buy, returned them all. None of them came even remotely close to the quality of the IBolt mount.

sshafranko said:
I second the IBolt for Note2. I have been waiting for it to be released for months now and it is finally out. Although you have to wait for the charging cable until March.
It is built very very well, mounts to windshield, dashboard and has an optional permanent mount bracket also. My favorite part is the phone goes into Dock mode once attached. I have this mount for the GS3 and it is amaizing. Before purchasing it for the S3 i went through three seperate mounts from Best buy, returned them all. None of them came even remotely close to the quality of the IBolt mount.
Click to expand...
Click to collapse
I was following this dock right up to the point where they said you had to connect the power cable yourself. I wanted a mount that I could slide the phone in onto a power connector, for one-handed operation. I'm now making my own

ChrisEmerson said:
I was following this dock right up to the point where they said you had to connect the power cable yourself. I wanted a mount that I could slide the phone in onto a power connector, for one-handed operation. I'm now making my own
Click to expand...
Click to collapse
I get what your saying, but i usually dock my phone when i get into my truck connect it and it stays there until i get out. I don't see any reason for plugging and unplugging it while driving unless i'm missing something?

sshafranko said:
I get what your saying, but i usually dock my phone when i get into my truck connect it and it stays there until i get out. I don't see any reason for plugging and unplugging it while driving unless i'm missing something?
Click to expand...
Click to collapse
Me too, it's just the ease of doing this that I want. Slide in, slide out, no fumbling around for cables and getting the orientation and angle right and pushing it in properly... Much rather have a 1 handed operation that I can get in the car, place the phone in its dock, bring the sides in to grip it (easily all done with 1 hand), and have it activate car mode and start charging from the car at the same time. Equally, to get it out I just press a button on the back to release the grip, and pull the phone up - still all easily done with one hand. It's how I've had every other car dock as well. Sometimes when I get in the car I forget to put my phone in the dock, so it becomes even tricker - this makes it very easy.
Anyway, each to their own. I'll probably start a thread about the one I'm making at some point so other people can do the same thing if they want.

ChrisEmerson said:
Anyway, each to their own. I'll probably start a thread about the one I'm making at some point so other people can do the same thing if they want.
Click to expand...
Click to collapse
I'm interested in your project. I was ruined by the excellent car dock that Motorola made for the Atrix. It was perfect.

[Q] Car mount similar to iOttie?

I have an iOttie that I use on my note 4 (I am going to return it, to get the nexus 6). However I noticed that the nexus will be too wide for the car mount. Does anyone know a similar mount that will fit this phone?

Not off hand. I wish they would release an official car dock. The one for nexus one and gal nexus were awesome. Nothing released officially for nexus 4 or 5

There's an "iOttie One Touch XL" that holds devices up to 3.5" wide, which should be enough for an N6 plus a case.

I'm planning to get The Air Dock for it.

eksasol said:
I'm planning to get The Air Dock for it.
Click to expand...
Click to collapse
As much as I love wireless charging (and I do I have 5 QI chargers at home I use all the time) it just doesn't work for me in the car. I use GPS and stream music all the time with screen always on. Wireless can't even come close to keeping up to that. I'm sure it will be worse with the N6 screen size too... I am really hoping they release an official car dock this time. Moto seems to be good at doing that so I am hopeful.

bogus83 said:
There's an "iOttie One Touch XL" that holds devices up to 3.5" wide, which should be enough for an N6 plus a case.
Click to expand...
Click to collapse
On iOttie's website FAQs, they list the sizes of each of their mounts. Actually, the One Touch XL only goes up to 3.3", which should be just wide enough for the N6 since it is roughly 3.27" wide. However, it probably wouldn't work if you put a case on it. The only one I can see working if you put a case on it would be the Easy View 2, which has a max width of 3.5".
HOWEVER, I can see another potential issue arising if you want to use a car mount like this. Notice where the buttons are. They are not towards the top of the device like other phones. They are smack dab in the center going down the right side, taking up a good range in the middle of the phone. So you would have to have the mount clamp down on either the top or bottom of the device. I guess we won't know how awkward it would be to use until we have the device in-hand, so we'll see when the phone actually comes out.

Interesting- when I posted that comment there was a graphic on the Amazon listing showing support for up to 3.5. The image is no longer there, so it was likely an error. Too bad.

pseudoSequential said:
I have an iOttie that I use on my note 4 (I am going to return it, to get the nexus 6). However I noticed that the nexus will be too wide for the car mount. Does anyone know a similar mount that will fit this phone?
Click to expand...
Click to collapse
I have the IOttie Easy One Touch XL
MODEL NO: HLCRIO101
It is the best mount I've found to reduce vibration, and super easy to use.
Another iOttie that would work if you need extra distance from your windshield to you, but will vibrate more of course is the iOttie Easy One Touch 2 Universal
MODEL NO: HLCRIO121

Just go with 9to5mac.com ... if they say this one is the best so I won't argue
http://9to5mac.com/2014/11/09/two-o...-by-winnergear/comment-page-1/#comment-224951
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

c4ud4m said:
Just go with 9to5mac.com ... if they say this one is the best so I won't argue
"To be clear, this won’t stay in one place during rapid acceleration and braking"
Click to expand...
Click to collapse
Sounds like a winner! :good:
Click to expand...
Click to collapse

Just found this
I have a Tylt Vu Qi charger for my N4 on my desk at work and I've loved it. I've had it for just about a year now (or has it been 2 I can't remember).
Anyway I ran across this recently and they are advertising it will launch this year. I'm optimistic since Tylt makes such high quality products (from my limited experience)
http://www.tylt.com/vu-car-wireless-charger/

Arioch5 said:
I have a Tylt Vu Qi charger for my N4 on my desk at work and I've loved it. I've had it for just about a year now (or has it been 2 I can't remember).
Anyway I ran across this recently and they are advertising it will launch this year. I'm optimistic since Tylt makes such high quality products (from my limited experience)
http://www.tylt.com/vu-car-wireless-charger/
Click to expand...
Click to collapse
That actually looks like a winner. I'd definitely be interested in purchasing one.
Sent from my GT-N7105 using XDA Premium HD app

I like the magnetic phone mounts. I currently use one from Mountek on my Nexus 5. http://www.mountek.com/shop/

Do you have to use the plate or does it just hold on with the Nexus 5 magnets?
Anything like that but with qi charging?
Thanks
Sent from my Nexus 5 using XDA Free mobile app

I just received this one from Amazon a couple days ago when I was able to get it for $7: http://www.amazon.com/gp/product/B009GSI0MM/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1. Will see how it works out. Keep in mind the buttons are almost smack dab in the middle of the right side of the phone, so you have to be mindful where the grippers will squeeze, or it'll push the buttons.

Inspiration! (Mountek nGrove Grip)

rubi76 said:
Do you have to use the plate or does it just hold on with the Nexus 5 magnets?
Anything like that but with qi charging?
Thanks
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I'm using Mountek nGroove Snap2 with my Nexus5. It's great that I don't have to use any of the plates provided as Nexus5 has wireless charging feature, so the body will stick to the magnet just fine. It is very convenient that I can just throw and it stick easily unlike the hassle of using grip type mount.
Now I hope it will work just fine too with Nexus 6. The non flat back of N6 worries me. maybe I need to modify it so that N6 will not move around when mounted. :fingers-crossed:

digitheatre said:
I'm using Mountek nGroove Snap2 with my Nexus5. It's great that I don't have to use any of the plates provided as Nexus5 has wireless charging feature, so the body will stick to the magnet just fine. It is very convenient that I can just throw and it stick easily unlike the hassle of using grip type mount.
Now I hope it will work just fine too with Nexus 6. The non flat back of N6 worries me. maybe I need to modify it so that N6 will not move around when mounted. :fingers-crossed:
Click to expand...
Click to collapse
I have the same magnetic mount. One of the best purchases I've ever made. I have an iOttie as well but the Mountek is just so much more convenient in that I don't have to slide open the arms to insert or remove my phone.
I have the same concern you do about the curved back. I also use a case and was thinking I'd have to bend the included metal plates to fit between the phone and the case. I absolutely refuse to stick the plate to the back of my case because of the added thickness and the fact that it will just look ugly.

I have the iOttie Easy One Touch 2 Universal Mount (The one that extends), it's a great mount and will fit the N6 without a case. The problem is the button placement on the N6., the mount manages to squeeze the lower volume button when it shuts. Also It will not fit with a case on. Just thought I would let anyone know who was looking into it for a care mount. Again for any other phone this thing is great, best mount I have purchased so far.

RAM X-Grip?
I have been looking into the RAM X-Grip, mostly because of its 4-point "X"-Grip which should avoid pushing any of the hardware buttons.
It is also built like a tank (w/ lifetime warranty) which should lend itself well to any dashboard video recordings should I desire to utilize it for that purpose.
It is relatively expensive ($40-52) but if it out performs (in terms of secure grip & vibration reduction) every other plastic 2-piece pincer style mount then it is absolutely worth the extra investment.
I am still unsure whether the short arm or medium arm length would be best and whether to go with the small or large suction cup option.
I read on Amazon, one pro for the large suction cup (aside from likely better suction) is that the 1" ball (that the arm attaches to) screws on to the suction cup so it can be a bit more versatile (allowing you to screw anything onto the suction cup) should you desire that functionality. Although it appears another option should you desire more versatility from your mount would be to purchase the 1" ball with the plate (w/ screw holes) separately and simply replace the X-Grip mount. This of course means you have the adjustable arm in the system now, but I think that's a good thing.
Last note:
I also read in an Amazon review (and sorta noticed in one video review) there MAY be a bit of play (rotating around the z?-axis, like rotating portrait to landscape) in the X-Grip cradle/mount itself, but more research is necessary to confirm this is actually an issue or just a faulty unit.
First post on XDA
I will be back after further research.

Finally got a wireless car charger setup

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The charger is the QiStone+ , really cool portable wireless charger.

Interesting setup. Did it come with the mount or did you buy that separately?

lloydapalooza said:
Interesting setup. Did it come with the mount or did you buy that separately?
Click to expand...
Click to collapse
Bought it separately, here's a link if you're interested.
i.Trek Universal Dashboard Mount with Built-In Holder (Black) http://www.amazon.com/dp/B007PSPQ7W/ref=cm_sw_r_udp_awd_DTENub1Z0TFPW

So it holds both the qistone and the phone without any movement at all? Looks snug on both in your pictures. I have been trying to figure out what to put in my car and this looks to be perfect!

makavelisk said:
So it holds both the qistone and the phone without any movement at all? Looks snug on both in your pictures. I have been trying to figure out what to put in my car and this looks to be perfect!
Click to expand...
Click to collapse
Yupp, it's been working fine for me, but I would recommend using a thin case or no case at all with the Turbo, because our QI chip kind of sucks compared to the other phones I have. It takes awhile to get them both in the position where it works but once I figured out what angle to keep the QiStone in, sliding the phone in is pretty quick now.

Thanks for the info. Just placed my order for the qistone+ and the dash kit! Freaking stoked!

makavelisk said:
Thanks for the info. Just placed my order for the qistone+ and the dash kit! Freaking stoked!
Click to expand...
Click to collapse
Nice. I've added a couple shims to get everything fitting better. You'll probably have to adjust a bit too depending on what case you use. By the way, I just tried it without a case and it wouldn't line up properly. Just letting you know.

So my wife got me a solar power charging brick.works pretty good. I would that with the qistone would give you unlimited portable charging. Just a though.
Sent from my XT1254 using XDA Free mobile app

joshm.1219 said:
Nice. I've added a couple shims to get everything fitting better. You'll probably have to adjust a bit too depending on what case you use. By the way, I just tried it without a case and it wouldn't line up properly. Just letting you know.
Click to expand...
Click to collapse
I'm looking to put this setup in my car as well, how thick is the case you're using? I couldn't find any dimension specifications online. I'm rocking a puregear clear naked, wireless charging works fine through the case. I'm probably going to rock a Himbox HB01 bluetooth adapter so my setup is totally wireless.
Would you recommend a different mount than the i.Trek now that you've got it all wrapped up? Thanks for doing the hard part, Josh!

Zedith2010 said:
I'm looking to put this setup in my car as well, how thick is the case you're using? I couldn't find any dimension specifications online. I'm rocking a puregear clear naked, wireless charging works fine through the case. I'm probably going to rock a Himbox HB01 bluetooth adapter so my setup is totally wireless.
Would you recommend a different mount than the i.Trek now that you've got it all wrapped up? Thanks for doing the hard part, Josh!
Click to expand...
Click to collapse
Thanks for the interest man. Honestly I would hold off until the AirDock 2.0 at this point. It's $85 at indiegogo, shipping in April. Really sleek QI magnet dock that has NFC built-in as well.
The setup I have here cost me roughly the same. The advantage of what I did is that the QiStone is a portable QI battery pack. It's useful for me because I have a Moto 360 as well. I was working off that when I made this setup, so if you're looking to use the QiStone than the design of the i.Trek is probably the only solution. I had to use a couple of shims i glued on for the Turbo to fit right.
I don't know if there's another dock with the same type of design as i.Trek, but I would check it out. What you want to look at is the grooves in the dock, where the devices will sit. If you can find one with closer grooves, get that. It's a little finnicky with the i.Trek if you don't do some DIY to get the charger and the phone close enough, especially considering it's getting bumped around.
The thinner the case the better I would think, but as long as it's thin enough to charge, you can customize the fit on the dock the way I did. The main problem with that is that the Turbo's Qi chip seems significantly weaker than other devices I've had. So you have to get it lined up perfectly with the QiStone.
I would take pics of it now but I don't have the Turbo anymore, switched to a N6.

Awesome! I had no idea there was an Air Dock 2.0 coming out, fortunately my i.Trek and Qistone+ haven't shipped yet so I went ahead and cancelled my orders.
Can't thank you enough for steering me toward that direction, I can't wait 'til April. I almost went the Nexus 6 route as well, but eventually flaked due to how inconvenient Verizon made it . Big is beautiful, and I bet you'll be looking forward to the Nexus 6 version whenever it drops.

Zedith2010 said:
Awesome! I had no idea there was an Air Dock 2.0 coming out, fortunately my i.Trek and Qistone+ haven't shipped yet so I went ahead and cancelled my orders.
Can't thank you enough for steering me toward that direction, I can't wait 'til April. I almost went the Nexus 6 route as well, but eventually flaked due to how inconvenient Verizon made it . Big is beautiful, and I bet you'll be looking forward to the Nexus 6 version whenever it drops.
Click to expand...
Click to collapse
Glad I saw your post in time. Between the N6 and the Turbo, I actually think the Turbo is the better phone. It's obviously a more manageable size, the battery lasts longer, the signal was great, and that screen is so goddamn sharp. Lollipop is buggy so I'm glad Verizon has held the Turbo to KitKat for the mean time. I just missed root, roms, and kernels too much so I had to make the switch.
I'm excited for that AirDock though, looks really sweet.

I would love to be able to mount the Airdock 2.0 onto my ProClip. Should be able to engineer a way

This has been a most illuminating thread! Thank you all for your input, I'm going to do some engineering myself now.....

I actually own the Air Dock 1.0, and it also has that combination of anti-slip/magnetic holders. I use it everyday. Holds just fine. I do use the phone without a case, so I can't speak of how it works with a case. I'd be concerned the magnets wouldn't grip unless you put a metal piece in-between the case and phone, then I don't know if it would mess up the QI charging capability.
I did back the AirDock 2.0. I wonder if they but stronger magnets in it. I know they improved the QI circuitry. I'm curious to see how much better it actually is.