[Q&A] [Kernel] [LOLLIPOP] [AOSP] [19.11.2014] AGK-LOLLIPOP v1.1 - One (M7) Q&A, Help & Troubleshooting

Q&A for [Kernel] [LOLLIPOP] [AOSP] [19.11.2014] AGK-LOLLIPOP v1.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Kernel] [LOLLIPOP] [AOSP] [19.11.2014] AGK-LOLLIPOP v1.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Which version TWRP advise to use?

Non aroma version please

i use this rom : http://forum.xda-developers.com/htc-one/development/rom-google-play-edition-lollipop-v1-00-t2963927/page37
Can i flash : http://forum.xda-developers.com/htc-one/development/kernel-agk-lollipo-v1-0-t2945268
Plz help me ! i can speak litter english ! tks so much

Somehow the kernel setting is funky for me.
DT2W is disabled even tho I enabled it during installation. F2W and F2S has to be disabled and enabled again to work.
I've tried both latest CM12 or the liquid smooth ROM, same thing.
Anyway to fix this?

Missing features
When i flash the GPE 1.21 (or even 1.0 and 1.1) zip using TWRP onto my gpe m7, I don't get any options in trickster which I did not have in the previous kernel. This led me to believe that there might be some issues with the downloads. I have no idea of how kernel zips should look like, but when I open the ones I downloaded, there are some folders, one of which is "system", which contains some more foldern which are all empty. This doesn't seem right to me, especially since elementalX has files inside those foldern, while this one doesn't.
Can you tell me what to do? I don't have flick2wake or all the governors you describe, only the ones I had with elementalX, so it apparently doesn't intall correctly.

GPE set on boot?
Hi guys, having an issue with the GPE version of the kernel... none of the settings will set on boot (tried using Trickster, Kernel Tweaker, and a couple others).
Also, does the kernel provide access to an rw /system folder? Because I can't use AdAway (it says it works then on reboot the default hosts file is installed) but when I tried the GPE ElementalX, AdAway worked just fine.

Hi, i tried to flash the latest version of your kernel V1.61 with aroma installer on the CM12, but when aroma opens in the top appears the writen v1.51 is a bug?or it's a issus of aroma version?

Hi,
I'm trying to get the aosp version of the kernel installed on my HTC one M7UL running the latest CM12 nightly. Unfortunately after the flashing process with TWRP, the phone goes in bootloop mode. I tried both the aroma package and the ready-to-flash one of the 1.6 and 1.61 version, and I had the same problem.
Is there any possible solution?

_MdnMtt_ said:
Hi,
I'm trying to get the aosp version of the kernel installed on my HTC one M7UL running the latest CM12 nightly. Unfortunately after the flashing process with TWRP, the phone goes in bootloop mode. I tried both the aroma package and the ready-to-flash one of the 1.6 and 1.61 version, and I had the same problem.
Is there any possible solution?
Click to expand...
Click to collapse
I have encountered the same problem

This 1.62 is aosp and not gpe, correct?

Clean install CM12 22 AGK 1.62 = OK
Why was logo 2 wake/sleep option removed?

I've used v 1.62 wih cm12 nigthli 11/02 and the system was very jerky even after several restart

Tried this kernel (V1.62) with a fresh install of CM12 Nightly 2015-02-16 and only get Bootloops.
Any one else?
Or even better: suggestions?

Guids said:
I have encountered the same problem
Click to expand...
Click to collapse
nontec said:
Tried this kernel (V1.62) with a fresh install of CM12 Nightly 2015-02-16 and only get Bootloops.
Any one else?
Or even better: suggestions?
Click to expand...
Click to collapse
Same here with CM12 nightly 2015-02-19.
Would have loved to use dt2w...
Sent from my One using XDA Free mobile app

Noob Question
I am relatively new to android.I have the One M7 (Hong Kong) version, running on complete stock Lollipop 5.0.2.Which version of the kernel should I use?
And is it sufficient to simply flash the .zip from recovery?

kernel d2w problem
Hy.I´m runing aosp based rom(slimlp) and i cant set the d2w option in ttrickster mod to 2.
after i set it to 2,it set itself to 0.
i have tried the version 1.6 and 1.7.

Does it work on moto e running on cm12 ??

Is compatible kernel with m7wls?

Double tap 2 wake not working
I'm on CM12.1, HTC One M7, AGK kernel 1.61.
Double Tap 2 wake is not working, i installed the aroma-installer version.

Related

[Q&A] [Kernel] Devil2-2.3.2 [4.4.x, 4.3.x] - f2fs Filesystem - Dualboot - 02/01

Q&A for [Kernel] Devil2-2.3.2 [4.4.x, 4.3.x] - f2fs Filesystem - Dualboot - 02/01
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Working with QS Port (4.4.2) after editing build.prop Thanks!
hi... Before I the stock ROM, " G6W 20140707-105159 " but it does not detect touch After I installed " kitkat 4.4 ROM G6-20140929-144358 " only I did download the rom file. "Firmware Upgrade" option and the "SP_FLASH_TOOL V5" with the program has been installed. Nope problems with installation files Opens the installation smart phone, . Kernel release cycles of problems are solved Or Have a fix file? Not touch screen senses at different points perceive touch at different points does not operate normally, how do I fix it?
EASMurat said:
hi... Before I the stock ROM, " G6W 20140707-105159 " but it does not detect touch After I installed " kitkat 4.4 ROM G6-20140929-144358 " only I did download the rom file. "Firmware Upgrade" option and the "SP_FLASH_TOOL V5" with the program has been installed. Nope problems with installation files Opens the installation smart phone, . Kernel release cycles of problems are solved Or Have a fix file? Not touch screen senses at different points perceive touch at different points does not operate normally, how do I fix it?
Click to expand...
Click to collapse
You are posting in i9300 (international s3)thread.
You probably wanted to post into a mediatek related one, as you are mentioning sp flash tools
Hello.
I installed your recovery and your kernel, but does not give me the option of formatting in f2fs.. Why?
I've flashed v3.4_0.5.3 on S5 sensation 4.4.2 and it stucks at boot animation. I even tried reinstalling the rom with this kernel. What could be the issue?
And one more question
How to know about the latest devil kernel? Its tuff reading all the comments fir searching
Edit: ok I found that 4.4.2 is not supported now
But where to find the latest kernel built?
mkhawx said:
I've flashed v3.4_0.5.3 on S5 sensation 4.4.2 and it stucks at boot animation. I even tried reinstalling the rom with this kernel. What could be the issue?
And one more question
How to know about the latest devil kernel? Its tuff reading all the comments fir searching
Edit: ok I found that 4.4.2 is not supported now
But where to find the latest kernel built?
Click to expand...
Click to collapse
Anyone??
Lollipop
Dev, Have any idea about extending support to Lollipop?
Of course. But it'll take some time
Hi, can you share config , which save most battery with last kernel version. .
PA 4.6 BETA 5 ROM User.
i flash this kernel on PA 4.6 BETA 5 ROM after that i reboot i got some FC's all GAPPS.
it is a bug or its imcopatible in the PA 4.6 BETA ROM?

[Q&A] [ROM][KK][4.4.4] Omni | Carbon Unofficial - .233 Blobs + MultiRom + OTA

Q&A for [ROM][KK][4.4.4] Omni | Carbon Unofficial - .233 Blobs + MultiRom + OTA
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Need help on one unusual issue!
Hi There,
I flashed this ROM on my Yuga as it had support for MultiROM. Runs fine as primary. However I have one issue which I had seen on stock ROMs aswell. Which is, I wont get sound in Earpiece while making call or receiving the call. Below are my findings:
1. Worked (works) fine with other CM based ROMs (even other Carbon rom by Alx31TLse, only build 38. Later builds giving same issue in my phone). Which confirms me that there is no problem with earpiece.
2. As of now using temporary fix: I got SoundAbout app which can route audio to Earpiece or other channels manually. which again confirms no issue with earpiece.
As am not so sure about in depth build changes, I really have no idea how to fix this permanently. Can some one please help.
Note: There is no problem with any of the ROMs, is just problem with my phone with few builds.
Thanks in advance.
Hi id like to know.. if you guys have a flashabke recovery zip recomended for this rom.. i installed it... Ended up bricking the phone... And going back to stock and di everything from scratch all over again...
I just installed the latest build and i have a question. Did you change the cwm? Using this rom as a primary for a long time i remember that the twrp was the default recovery plus there was the hydra logo appearing when booting. Now i got the sony logo and when i boot to recovery i have the cwm v6. My point is, i forgot to check inject multiboot after updating the rom to the latest build so i cant see multiboot menu. In order to have it back, do i just have to flash multirom through cwm or is my system messed up and i need a fresh install?

[Q&A] [ROM] [4.4.4] [p880] Mahdi-Rom 2.9 (Final) Unofficial [27-10-14]

Q&A for [ROM] [4.4.4] [p880] Mahdi-Rom 2.9 (Final) Unofficial [27-10-14]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [4.4.4] [p880] Mahdi-Rom 2.9 (Final) Unofficial [27-10-14]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Does this ROM fix problems with sensors not working?
Also, how's battery life? CM11 drains it so quickly
wort11 said:
Does this ROM fix problems with sensors not working?
Also, how's battery life? CM11 drains it so quickly
Click to expand...
Click to collapse
What problems? I have not noticed any problems with sensors. Please be more specific
Read thread or make your own opinion.
alfsamsung said:
What problems? I have not noticed any problems with sensors. Please be more specific
Read thread or make your own opinion.
Click to expand...
Click to collapse
CM11 caused sensor failure for me. And even when I restored stock ROM, sensors still didnt work. Once I installed CM11 latest nightly, sensors all worked again, but the next morning, they stopped working again. I think it's not HW issue but more of a SW issue, since many people are facing this problem.
That's why I asked if anyone noticed any sensor problems with this ROM, because I might give it a shot. Not sure why my sensors stopped working though.
Gapps
what do you mean... "dont install stock gapps"
so gapps from http://wiki.cyanogenmod.org/w/Google_Apps isnt ok?
what happens if I flash Gapps from website I provided? Sorry for stupid questions but I dont have much knowledge about this stuff.
Micro-SD not detected...
Like it's written in the title... i flashed the latest version of your rom (2.9) and when I go to Settings/Storage and I mount my micro-sd card it shows "Total Space 0.00 B, Available 0.00B"...
The capacity of my sd-card is 64GB. Does your ROM support 64GB cards? (later I flashed Vanir's ROM and CM-nigthtly's and there were no problems).
Thanks for your response
Im not able to download latest rom. Stops at 19.57kb.
Edit. In fact i cant download any files. For example: i tried to download gapps and it didnt work. Downloads some kb of that file and stops. Im confused...
Edit2. Its something wrong with Dolphin browser. Default browser downloads with no problem.
@juhca: It should work, but I don't have a card with that size. Are you using more than one partition and is it fat32? Any chance you can provide some logs(kernel and logcat)?
Anyone else having this problem?
@alfsamsung - no I'm using one partition exFat (instead of exFat, should it be fat32?)
I included the requested log files in included zip file.
And I also have a last question. My phone is constantly losing network signal (regardless of ROM - also Cyanogen, Vanir and Beanstalk)... most of the times when I switch between the network modes (2G, 3G) and I have to retype my pin. But in some cases, when I don't change the network mode, it shows a full signal bar, but I cannot call nor connect to the internet. I have to reboot my phone or leave it on Airplane mode long enough, to retype my pin code.
Do you know anything regarding this issue?
@juhca: Your sdcard gives a lot of io errors and it is mounted first as exfat then vfat. An error occurred while scanning file '/storage/sdcard1/Sounds/Rammstein Discography VBR MP3/ You should backup your card and reformat it. Try the card empty before you move back your files.
And did you do a clean install?
Some users have these network problems and it's difficult to figure out why.Have you tried updating baseband to v20C 7-10-14?
@alfsamsung
Ok thanks I'm backing up my data and in two hours I'll try again. Also yes, I did a clean install because that's what you should do if you are flashing from another custom rom.
Finally, where can i find the baseband v20C 7-10-14? I was looking here http://forum.xda-developers.com/showthread.php?t=2329768 and here http://lg-phone-firmware.com/index.php?id_mod=15 and also google. But wouldn't that revert it to stock rom and then I'd have to root it again?
Follow this guide to update to v20C
Thanks, I'm trying it right know
Doubt
When I lock my phone the light of buttons don't turn off. How can I fix this?
I read it would help to turn the animations off.
@alfsamsung
Ok I fixed the SD-card problem and flashed the v20c baseband and my version was L6260_MODEM_SIC_02.1233.00.
Today I flashed Mahdi 2.9b and now, my baseband version is LGP880AT-00-V20c-232-10-JUL-10-2013.
What I'm asking is, every time I'll want to update or flash new ROM I'll have to re-flash the v20c (L6260_MODEM...) again?
@mateuspecly
Yeah, I've the same problem, but only when charging (even if i disable the light). When I unplug the device from the charger, the buttons are backlit by the default time (5 sec).
You don't need flash that again. Don't worry
Sent from my Optimus 4X HD using XDA Free mobile app
juhca said:
@alfsamsung
Ok I fixed the SD-card problem and flashed the v20c baseband and my version was L6260_MODEM_SIC_02.1233.00.
Today I flashed Mahdi 2.9b and now, my baseband version is LGP880AT-00-V20c-232-10-JUL-10-2013.
What I'm asking is, every time I'll want to update or flash new ROM I'll have to re-flash the v20c (L6260_MODEM...) again?
@mateuspecly
Yeah, I've the same problem, but only when charging (even if i disable the light). When I unplug the device from the charger, the buttons are backlit by the default time (5 sec).
Click to expand...
Click to collapse
What you installed isn't the newest modem, don't know exactly. It dates to year 2013 l, now the newest is October 2014.
Katero verzijo si namestil?
LGaljo said:
What you installed isn't the newest modem, don't know exactly. It dates to year 2013 l, now the newest is October 2014.
Katero verzijo si namestil?
Click to expand...
Click to collapse
I installed the Austrian version of v20c from http://lg-phone-firmware.com/index.php?id_mod=15, but later I compared my baseband to a friends (who flashed the v20c from Germany) and we had the same version: L6260_MODEM_SIC_02.1233.00.
But if that's the problem I'll just flash the german version and try again
EDIT: Now I flashed the german version and flashed a fresh copy of Mahdi... it seems to be working
juhca said:
@alfsamsung
Ok I fixed the SD-card problem and flashed the v20c baseband and my version was L6260_MODEM_SIC_02.1233.00.
Today I flashed Mahdi 2.9b and now, my baseband version is LGP880AT-00-V20c-232-10-JUL-10-2013.
What I'm asking is, every time I'll want to update or flash new ROM I'll have to re-flash the v20c (L6260_MODEM...) again?
@mateuspecly
Yeah, I've the same problem, but only when charging (even if i disable the light). When I unplug the device from the charger, the buttons are backlit by the default time (5 sec).
Click to expand...
Click to collapse
I disabled the light and it worked for me, thanks.

[Q&A] [ROM] [14Feb] [Unofficial] AICP - 8.0 - LP 5.0.2_r1 titan - UNIFIED

Q&A for [ROM] [14Feb] [Unofficial] AICP - 8.0 - LP 5.0.2_r1 titan - UNIFIED
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [14Feb] [Unofficial] AICP - 8.0 - LP 5.0.2_r1 titan - UNIFIED. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Nice Rom but little bugs
Someone who can't connect to a WIFI repeater too?
I can only connect to the Router itself
Great rom btw it really is smoothest out there in my opinion! Will xposed work with this rom atm?
I try many roms, but this is the best. Amazing boot animation and many features.
Any way to increase in-call volume?
How is RAM Management?
anybody know how to fix this, cant connect to wifi, i see its something that android cant get ip? access point is working for other devices
p.s. after long connecting it shows avoided poor internet connection but it isnt poor, and in advanced/ avoid poor connections turned off..
i can't use this rom, because when i call i don't listen nothing! in general is stable rom
Battery draining very quickly
Battery drains to rapidly, please take a look on batter backup..
Otherwise very good rom, great job keep it up..
Battery Draining problem
Battery drains very quickly,any solution for this problem.
otherwise great rom and great work .
keep it up
Running 1068, did clean install.
Bluetooth music working fine, call volume is good.
Like on seemingly all cm12 roms, video playback in browser is not working, absolutely laggy.
Is it possible to remove google search bar from homescreen(s)?
I'm also affected by bluetooth media playback bug, otherwise it's great.
HELP
Hi,
I forgot to do a backup of my rom on the moto g 2014 and i tried to flash AICP - 8.0 - LP 5.0.2_r1 titan - UNIFIED.
The problem is that when i flash it and reboot the device, the rom keeps loading and nothing happens.
I have an XT1068 with TWRP recovery.
I tried to reflash it and it just keeps doing the same.
I don't know what to do now since I don't have other roms and even a back up of the original ROM...
What can I do? I don't have a micro sd card too..
Please help me.
I've tried to sideload but it gives me an error!
dimon5000 said:
the rom keeps loading and nothing happens.
Click to expand...
Click to collapse
If you are coming from another ROM, you have to wipe system, dalvik, cache and data. After that unmount system. Now flash ROM and optional gapps and SuperSU.
P.s. Make sure to use at least twrp 2.8.5.0
doppelhelix said:
If you are coming from another ROM, you have to wipe system, dalvik, cache and data. After that unmount system. Now flash ROM and optional gapps and SuperSU.
P.s. Make sure to use at least twrp 2.8.5.0
Click to expand...
Click to collapse
Unfortunately that didn't help, don't know why. I've installed TWRP 2.8.5.0 and nothing. I obviously did a full wipe (dalvik cache too) and it keeps loading...
I'll try to flash another rom, will see if it's a rom problem or something is wrong with my device.
UPDATE: Tried with another rom, this is the message on TWRP:
***Symlink: no of symlinks failed = 1
E: Error executing updater binary in zip '/sdcard/ROM.zip'
Updating partition details
...done***
UPD2: Installed cyanogenmod 11 succesfully.
Great roms
Very nice job for this rom. I want to report just a minimal problem I have.
I like to charge my phone turned off but when I plug the charger the phone turns on itself. Any fix?
dimon5000 said:
Unfortunately that didn't help, don't know why. I've installed TWRP 2.8.5.0 and nothing. I obviously did a full wipe (dalvik cache too) and it keeps loading...
I'll try to flash another rom, will see if it's a rom problem or something is wrong with my device.
UPDATE: Tried with another rom, this is the message on TWRP:
***Symlink: no of symlinks failed = 1
E: Error executing updater binary in zip '/sdcard/ROM.zip'
Updating partition details
...done***
UPD2: Installed cyanogenmod 11 succesfully.
Click to expand...
Click to collapse
If you come from KitKat you have to install Stock Lollipop or TitanPrime Rom before flashing a CM12 based Rom.
ErichM said:
If you come from KitKat you have to install Stock Lollipop or TitanPrime Rom before flashing a CM12 based Rom.
Click to expand...
Click to collapse
The problem is that the ROM.zip that I was trying to flash was the stock lollipop ROM and it didn't flash (as you can see)
But anyway, after installing the CM11 I tried to flash Quantum LP and all is ok now, the ROM, even if buggy, is working.
Later I'll try to reflash a CM12 based rom and will see if it'll work.
Thanks anyway for help!
You said you flashed AICP - 8.0 - LP 5.0.2_r1 titan - UNIFIED, which is a cm12 based rom and not based on stock lollipop.
If you tried to flash AICP - 8.0 - LP 5.0.2_r1 titan - UNIFIED coming from KitKat, you're bootloop is a known issue, if you tried to flash a stock lollipop Rom, you seem to have a unique problem.
wifi not work
1st of all @kaus , awesome work man !
1st i was using titan prime roms then after some time some cm12 roms with many bugs in it.
Then i tried the cm prime rom , pa , mokee etc .
Then i saw the reviews of your build , so i flashed it
I must tell , none of the roms is fast as your aicp .
The rom is fast , with tons of features , no fC issue
The rom is working great for me
Bug is in Bluetooth , i hope it ll be fixed on your next built !
Guys try this rom , you won't regret it !
Waiting for your next built @kaus.

[Q&A] [ROM][LP 5.0.2][27/02/2015] OmniRom Lollipop by HumberOS

Q&A for [ROM][LP 5.0.2][27/02/2015] OmniRom Lollipop by HumberOS
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][LP 5.0.2][27/02/2015] OmniRom Lollipop by HumberOS. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Lost Root
Hello, after the Lollipop installation the cellphone lost the Root access, how I can root again?
Thanks.
gtchapin said:
Hello, after the Lollipop installation the cellphone lost the Root access, how I can root again?
Thanks.
Click to expand...
Click to collapse
Go to this page http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip download SuperSU and flash zip like you flash rom and reboot now your captivate is rooted
Thanhtho96 said:
Go to this page download SuperSU and flash zip like you flash rom and reboot now your captivate is rooted
Click to expand...
Click to collapse
Thanks a lot, it solve the issue.
is the neatkernel compatible in this ROM ? hope capable because neatkernel is my savior to boot my Samsung Captivate.
My USBstorage is currupted thats why i use NEATKERNEL to swap in my repartition SDcard.
Hope you can help me... sorry for my bad english.
yddar17 said:
is the neatkernel compatible in this ROM ? hope capable because neatkernel is my savior to boot my Samsung Captivate.
My USBstorage is currupted thats why i use NEATKERNEL to swap in my repartition SDcard.
Hope you can help me... sorry for my bad english.
Click to expand...
Click to collapse
No. I don't think so. Your captivate won't bootup with this ROM + Neat kernel
i9000 kernel
Hello,
I have slimbean on my captivate with semaphore. When I try to flash this rom, it tells me that my phone is a i9000 instead of an i897, which it actually is. Which Kernel can I flash that works with this rom, but also is a captivate kernel?
Thanks!
Install APK
I can't install APK file
It's say "Can't open file"
albogino said:
Hello,
I have slimbean on my captivate with semaphore. When I try to flash this rom, it tells me that my phone is a i9000 instead of an i897, which it actually is. Which Kernel can I flash that works with this rom, but also is a captivate kernel?
Thanks!
Click to expand...
Click to collapse
That would be cause you flashed the I9000 version of Slimbean. You can change it in your build.prop but wouldn't suggest it if you're new at it.
Go into your phone settings and check what variant/version is says you have. If it says I9000, you'll have to flash the I9000 version. That being said, if you're 100% your phone is an I897, flash back to stock, grab the I897 Slimbean and then flash Semaphore.
hts2007 said:
I can't install APK file
It's say "Can't open file"
Click to expand...
Click to collapse
What apk? You'll need to provide some more details.
Question on OmniRom Lollipop by HumberOS - Could not be downloaded, error 491
Hi friends,
danielad200 wrote on 23rd March 2015, 09:54 PM
cannot install any app and geting error 491 in the market for install any app
No responses to that in the original thread. I have gotten this bug too. Searches tell me to remove my google account, clear the caches of Google Play, reboot, put in my google account and all will be well. Worked for everyone else on the google searches except me and maybe danielad200.
Any help or suggestions out there?
APN
5.0.2 With Gapps has been my daily driver for a few weeks now, its really smooth. Only thing that seems laggy to me is making calls, and the time lapse between receiving a call and the screen waking up.
5.1 Is worked even more smooth, only issue that I've had is for some reason, I'm not able to access Data with my APN. All my settings are correct. WIll try flashing again, to see if that might help. Is there anything that you recommend? Data worked fine with 5.0.2.
can't set lockscreen wallpaper
my lockscreen is black pure black? is that normal? can't set lockscreen wall paper by 'set as'
lconan90 said:
my lockscreen is black pure black? is that normal? can't set lockscreen wall paper by 'set as'
Click to expand...
Click to collapse
Navigate to setting/performance/advance tick force high-end graphics
Changelogs
pliz is there any changes in the card functionality of this new mod...? cause the former is quite disturbing.. it always shows no files in my card.. even after a reboot..
icon
the message app seems to be the old one like in 4.4~
---------- Post added at 09:53 AM ---------- Previous post was at 09:45 AM ----------
Thanhtho96 said:
Navigate to setting/performance/advance tick force high-end graphics
Click to expand...
Click to collapse
Thanks a lot
Random Reboot
I am still experiencing random reboots. Normally it happens if i am on the call for 8-10 min.
Works smooth
Works smoothly on my captivate no problem in connection to buttons functioning. although it has many bug issues timely some developers would fix them. Many Thanx to Humber OS creator cause of for captivate the exclusive LP OS made available.
It works!
I've been using this series of ROMs practically since they were released. I wanted to say a huge thank you to HumberOS and Monfro for the work they have done.
I personally have found, after testing each release, that Monfro's April 5.1 port is the most stable, smooth, and quick of all of them. I can't really vouch for anything related to taking calls though, as I don't have a SIM in it.
-venividivici24
Thanks a lots .. I have DHG-i897
Humbert , very good job , thanks a lots for your ROM works great , antutu benchmark got 7450 point , only that it is missing is the TV OUT ... that has this cell originally until kk 4.4.4
SGH-I897 ..
thanks against , and let me know if you add that function .. Gus
i897 best option
I have a Samsung Captivate i897 and just put 4.4.4 KitKat on it. Running a bit slow. How does OS version 5 work on the captivate? If people had to recommend a particular OS that was the most current you could get without any real loss in performance what would it be? Found 2.3.5 was fine the few minutes I was on it. But that's pretty old. Was originally going to go for 4.2.2 but found an article on 4.4.4 so went straight to it. Curious other's opinions.
Thanks.
jR

Categories

Resources