[Q] Keyboard in Messaging displays Emoticons instead of Enter key - G 2014 Q&A, Help & Troubleshooting

I've recently bought a Moto G, and whilst playing around with the Keyboard in Messaging, finding everything (particularly punctuation, the keyboard on my HTC Desire S had punctuation on the long presses of keys) I changed the "Enter" key to the "Emoticons" key, and now I can't change it back. In other apps, like Twitter and Facebook the "Enter" key takes precedence over the "Emoticons", and I can switch between them with long presses. However in Messaging this key is now firmly set to "Emoticons" no matter how long I press the key down for.
Can I undo this change and if so, how?

Related

Remapping the two small keyboard buttons

There are two small buttons (each marked with a small horizontal line) on the keyboard. The left is over the letters R and T. It is assigned to the "Send" button for email. The trouble is that it is very easy to hit by accident when typing R or T, and then the email flies off prematurely! The right one is assigned to the Menu and if you hit it by accident, it is easy to correct (just hit the OK button). Is there a way of remapping these two buttons? Except for this issue, the email with Kaiser is perfect. Does the AT&T Tilt have the same problem?
See my thread here. Those are the same as the softkeys on the font keypad (so remapping one remaps the other). I ended up using AE Button Plus to remap those (and other keys) to other functions, which I like because of the additional functionality that can be assigned to double clicks, triple clicks, etc. But if you just want to remap it to something else, check that thread for some alternatives.
dscline said:
See my thread here. Those are the same as the softkeys on the font keypad (so remapping one remaps the other). I ended up using AE Button Plus to remap those (and other keys) to other functions, which I like because of the additional functionality that can be assigned to double clicks, triple clicks, etc. But if you just want to remap it to something else, check that thread for some alternatives.
Click to expand...
Click to collapse
Err... I don't think this addresses the problem the OP has. I too suffer from this problem (must be big fingers!).
When using Outlook the soft keys change function so remapping the Today Calendar softkey, for example, doesn't help.
Anyone else got a solution to this problem, I'm fed up with sending half-finished e-mails!
I haven't played with AE Button Plus, but if you can assign "No Action" to a button (which some of the add-ons let you do) and do that for the messaging app specifically, then that would be a solution to the problem of large fingers/thumbs. The you could remap one of the FN keys you never use to the context menu or send...
TexasPenguin said:
Err... I don't think this addresses the problem the OP has. I too suffer from this problem (must be big fingers!).
When using Outlook the soft keys change function so remapping the Today Calendar softkey, for example, doesn't help.
Click to expand...
Click to collapse
As PerfAlbion pointed out, you can just remap them to nothing. I remapped these keys, not because of the problem with the keyboard, but simply because I never used them since it's just as easy to use the touch screen. But if you want to maintain the softkey functionality on those buttons, use AE button to map a single press to nothing, and a double-click (or even a click-hold) to the softkey function. You would then still be able to use them for their original purpose, but they wouldn't be as easy to accidentally activate.
dscline said:
As PerfAlbion pointed out, you can just remap them to nothing. I remapped these keys, not because of the problem with the keyboard, but simply because I never used them since it's just as easy to use the touch screen. But if you want to maintain the softkey functionality on those buttons, use AE button to map a single press to nothing, and a double-click (or even a click-hold) to the softkey function. You would then still be able to use them for their original purpose, but they wouldn't be as easy to accidentally activate.
Click to expand...
Click to collapse
I'm sorry, I must be missing something obvious here.
Any of the soft button remappers will NOT work on application-specific softkeys - AE ButtonPlus specifically says this in it's FAQ. Remapping the "send" key is application-specific - it only becomes the Send key when you launch Outlook. So how did you manage to re-map this key?
TexasPenguin said:
I'm sorry, I must be missing something obvious here.
Any of the soft button remappers will NOT work on application-specific softkeys...
Click to expand...
Click to collapse
The distinction is between remapping the softkey, or remapping the hardkey that correlates to the softkey. What the remappers can't do is change the function of the softkey... if, for example, Outlook is coded to make the left softkey the send key, you can't change that. That's programmed in to Outlook. But what you CAN change is whether or not the hard button that corresponds to the left softkey is recognized as the left softkey. For example, I've remapped the single press of the hard keys that correspond to the L & R softkeys to copy and paste, respectively. If I open Outlook, the soft softkey (the button on the touchscreen) is still going to be send. But my hard button is no longer mapped to be a softkey, it's mapped to be copy.
I used all the programs from the thread that you pointed out, including the cab file that was mentioned. This allowed me to change the left front soft key but does not affect the assignment of the left keyboard soft key as "Reply" when in email mode and with the keyboard slided out. Is there a way to change the left soft key assignment only for the email (eliminate the reply option) or just inactivate the left soft key altogether? I have installed the SoftKey applet form your thread in my Settings.
I sent my reply to one of the earlier messages wihout having read all the answers that came after it....I was out of the office for a couple of hours..my apologies. I will find the AE button plus and give it a try, but is there any registry solution? they usually work the best.
I downloaded and used the AE Button Plus, and it worked! I set it to double press and that did the trick. The program is very good by the way, the only one that allows multiple pressing options, etc.Many thanks!
I have benefited from this thread!
Thanks everybody.
Adequate description on the issue provided, and adequate solutions and then a follow up post.
A really appealing solution would be to isolate the keyboard softkeys from the front ones. I tried the double press method but it turned out to be incredibly annoying and I'm not sure that constant annoyance is outweighed by an accidental softkey hit on the keyboard. What I'd like to do is disable the keyboard softkeys while leaving the front ones completely intact on a single press.
I find it surprising that you even need to use the softkeys, period. I came to the Kaiser from a Smartphone edition phone (no touchscreen), which I had for for over two years. So I was completely accustomed to using the smartkeys. Yet, surprisingly, once I got the Kaiser, I found myself immediately and instinctually accessing their functionality from the touchscreen rather than the hard buttons. Perhaps because the hard buttons aren't directly under the screen like they were on my smartphone, so the tie betwee the label and the button wasn't as obvious as it was on the smartphone.
dscline said:
See my thread here. Those are the same as the softkeys on the font keypad (so remapping one remaps the other). I ended up using AE Button Plus to remap those (and other keys) to other functions, which I like because of the additional functionality that can be assigned to double clicks, triple clicks, etc. But if you just want to remap it to something else, check that thread for some alternatives.
Click to expand...
Click to collapse
Thank you, AE Button Plus worked great. I just deactivated the "Left Softkey" and now I don't have to take care of that damned button anymore.
dscline said:
I find it surprising that you even need to use the softkeys, period. I came to the Kaiser from a Smartphone edition phone (no touchscreen), which I had for for over two years. So I was completely accustomed to using the smartkeys. Yet, surprisingly, once I got the Kaiser, I found myself immediately and instinctually accessing their functionality from the touchscreen rather than the hard buttons. Perhaps because the hard buttons aren't directly under the screen like they were on my smartphone, so the tie betwee the label and the button wasn't as obvious as it was on the smartphone.
Click to expand...
Click to collapse
I've been using touchscreen pocket pc's for a while and no such instinct has kicked in.
so no one has an answer besides installing that AE button plus prog on the phone?
try removing the actual key. i wouldn't try it but it may work.
I'm really glad I found this thread, I keep sending half written and blank sms messages because of the left soft and keep doing weird things because of the right one. It's gonna cost me a fortune in text messages so I'm gonna go try that prog mentioned.
It would be better for a solution more specific to the application but this is certainly better than nothing!
the best solution I can think of is:
- remove the sender name whilst creating email.
if you accidently hit send it will prompt for sender info. when you are ready to send, simply insert the contact details in and all is well.
hope this helps some of you
firstbuddha said:
the best solution I can think of is:
- remove the sender name whilst creating email.
if you accidently hit send it will prompt for sender info. when you are ready to send, simply insert the contact details in and all is well.
hope this helps some of you
Click to expand...
Click to collapse
I think we have a WINNER SOLUTION

How to disable inner "soft" keys

How can I disable these?? The keys above and between "I" and "O", and between "R" and "T"? I hate them. I type incredibly fast and happen to blunder on them at least once per message, email, etc...
I've tried to change my typing style, but that isn't 100% effective and only slows me down.
I would like nothing to happen when I push them. I also do not use the "soft" buttons above the IE and Mail buttons. I don't have issues with accidentally hitting them, though. But if they get disabled with the ones in the full keyboard, it won't bother me (not sure if they're tied together).
I only want the actual onscreen soft buttons to work. Can anyone help?
By the way, I went into Settings > Personal > Buttons, but only 6 are shown (not counting "push and hold").
There are a total of 13 buttons on this thing if you include the push button on the wheel, and don't count the keyboard mappings. 11 buttons if you count the front and inside soft buttons as only 2....
I am currently searching for a solution to the same problem for the same issue. I cannot even count how many times I have accidentally hit the send button when all I wanted was the letter.
I am not that an incredibly fast typist, though.
I use AE Button Plus and this allows you to remap all of the keys to other things as well as map one, two and three presses along with long press.
You could use this to remap one press of the softkey to nothing and two presses to activate the softkey. This would mean that you would have to press them twice to make them work, but would stop teh accidental presses.
dryden said:
I use AE Button Plus and this allows you to remap all of the keys to other things as well as map one, two and three presses along with long press.
You could use this to remap one press of the softkey to nothing and two presses to activate the softkey. This would mean that you would have to press them twice to make them work, but would stop teh accidental presses.
Click to expand...
Click to collapse
Would that have the same affect on the "onscreen" soft buttons (touch screen).
I've just had a quick play and it appears to only affect the hardware buttons, which, I think, is what was originally wanted.
It's a good program, I use it a lot and it's FREE!
Is there nothing someone maybe found to disable these in the registry. I also hate these buttons too.

disable softkeys on slide-out keyboard

I use the softkeys sometimes on the main/normal/portrait keyboard, but I never use them when slided out - they are so tiny, and I always hit them on mistake.
Is there any way to easily disable them... ?
I use AE Button Plus, but I can't see any option in there to change these keys.
I use AEBPlus and set the Single press action to "None" and the Double press action to "Press Left/Right SoftKey" as appropriate. That way, if you accidentally hit the softkey while typing, you no longer do something stupid/annoying/disasterous like sending an incomplete email.
It means that the soft keys, when the phone is open or closed, will no longer register anything with just a single press but you soon get used to double pressing when you need to use them (or just use the on-screen softkeys).
Edit: Sorry, you said that you didn't see an option to change these keys in AEBPlus. There are options to change the Left and Right SoftKeys but these change the softkeys when the phone is closed as well as when it is open.

Samsung Keyboard preselected symbols?

I seem to have lost a feature of the stock Samsung Keyboard that is driving me nuts.
When I long-press a key to get the choice of symbols associated with that letter to come up, it used to have the main symbol preselected. I just long press, then release and it would insert the preselected symbol without any further action.
Now if I long press a key, it pulls up the same list of symbols, but no preselection. I have to choose one of the options before it will insert it.
Is there an option to turn that on that I am missing?

Missing keys on Tab S5e Keyboard Cover

Regarding the UK version of this keyboard, I can't seem to figure out how to input '~' or '#' symbols with the key that displays '~', '#', '|', '\'.
Anyone figured this out?
'Pg up', 'Pg down', 'Home' and 'End' can be emulated by holding 'ALT' and pressing the directions but only sometimes.
e.g. 'ALT' + Left arrow will execute the back action in Chrome browser.
Same for 'Esc' when holding 'ALT' and pressing the top left button. This does not seem to be just the escape function when using VIM in a terminal.
This is quite frustrating because I purchased this setup to do server work and I use these keys quite often.
I don't know how to help you, but can't you install the KeyMapper app to set key combinations for the missing keys?

Categories

Resources