Related
i got xposed framework and i installed it and when i reboot it says like please install again or some error comes up. I have a htc one m8 att unlocked rooted also
shalko25 said:
i got xposed framework and i installed it and when i reboot it says like please install again or some error comes up. I have a htc one m8 att unlocked rooted also
Click to expand...
Click to collapse
I feel your pain. I had it working at one point but I restored a backup with TWRP and now I have the issue again. I am going to mess with it now and see if I can get it to stick. It will work because I also have a backup (TWRP) in which it does. But on that image, my wifi tether stops when the screen goes black/locks. I WILL figure it out though.
shalko25 said:
i got xposed framework and i installed it and when i reboot it says like please install again or some error comes up. I have a htc one m8 att unlocked rooted also
Click to expand...
Click to collapse
OK. I Got it going again.
Here are ALL the steps I tried in order:
1. Install latest apk
2. Open app and install framework
3. Select install zip manually via recovery
4. Install framework 2.3.1 zip
5. Reboot
6. Didn’t work.
7. Uninstall. This will make an Xposed disabler and give the path
8. Hit ok and it will boot to recovery
9. Click install and locate the Xposed-Disabler-Recvoery.zip. This will uninstall the framework.
10. Uninstall app
11. Reinstall app
12. Open app and install framework via the zip recovery method
13. In recovery, click install
14. Install version 2.1.4 framework
15. Reboot
16. Didn’t work
17. Install framework with recovery-use auto mode
18. WIN!!!!
It was way easier than I was making it. So in short.
1> Install the latest version (stable) 2.6.1 of the app/apk.
2> Open the app after it installs.
3> Click on Framework.
4>Installation Mode should be set to (flash zip
automatically).
5> Click Install/Update.
6> When prompted, click OK to reboot to
recovery.
7> Phone will boot to recovery, install the frame work and
reboot.
8> When the phone reboots, open the Xposed app and the framework
should be good to go.
Let me know.
I recently started playing pokemon go and I am getting really frustrated while playing because it lags soo much and my phone is generally quite slow now. I have been told rooting and installing a good ROM can help with this and I have never attempted this, could someone please explain what rooting and ROMs are and their benefits and a how to guide for this phone and also the best ROM?
I know there are loads of threads on this but if someone could link me best threads I would be eternally gratefull!!
First of all, which variant of LG L90 is your phone (D4xx)? And could you go to Menu > General > About Phone > Software Information and tell me your "version" (v10x or v20x)?
Root is the ability for the user to take total control of his phone, from doing as little as automate 3G activation when an app is open to instaling custom ROMs, which are custom firmwares that you can install in your device, just like the stock one you're currently in, but with some modifications made by its creators. As for advantages, with root you have more freedom over your device, and with Custom ROMs you have some tweaks, which change depending on the ROM you choose to install, going from just porting newer firmwares to older devices to being an entire new OS (Operational System, in case you don't know).
Hyoretsu said:
First of all, which variant of LG L90 is your phone (D4xx)? And could you go to Menu > General > About Phone > Software Information and tell me your "version" (v10x or v20x)?
Root is the ability for the user to take total control of his phone, from doing as little as automate 3G activation when an app is open to instaling custom ROMs, which are custom firmwares that you can install in your device, just like the stock one you're currently in, but with some modifications made by its creators. As for advantages, with root you have more freedom over your device, and with Custom ROMs you have some tweaks, which change depending on the ROM you choose to install, going from just porting newer firmwares to older devices to being an entire new OS (Operational System, in case you don't know).
Click to expand...
Click to collapse
Thank you soo much for your reply and sorry about my late reply. My variant is LG-D405n and software version is V20c-234-30. I think I understand what Root and ROM is thx.
So could you link me to the best method to root and install ROM on my phone?
And what is the best ROM for my device to free up the RAM and CPU used on my device to increase my phone speed?
First of all, install these required apps:
http://king.myapp.com/myapp/kdown/img/NewKingrootV4.9.6_C151_B309_en_release_2016_08_18_105203.apk (For rooting)
https://play.google.com/store/apps/details?id=com.cgollner.flashify (For flashing the Custom Recovery)
https://play.google.com/store/apps/details?id=jackpal.androidterm (For terminal emulation)
Custom Recovery:
TWRP: http://forum.xda-developers.com/devdb/project/dl/?id=18679&task=get
Personally recommended Custom ROM, CyanogenMod (Ports Android updates to older phones plus some tweaks) and Gapps (Google Apps, it's needed to have things like calculator, play store, etc):
CM13: https://download.cyanogenmod.org/get/jenkins/175208/cm-13.0-20160820-SNAPSHOT-ZNH5YAO0J8-w7.zip
Gapps: http://opengapps.org/ (Go to this link, select ARM in platform, 6.0 in android and Nano in variant, then just click the download image button)
Put the TWRP img, the CM13 rom img and gapps on microSD or internal storage. Open Kingroot and click on the green button after the 3 introduction images. After a few minutes, your device will be rooted. Grab this file: http://forum.xda-developers.com/lg-...0w7xxshoxx-t2826150/post54358527#post54358527 (D405n_v20a_patched_aboot, don't worry, it's okay if you flash a different software version aboot as long as it's the same device as yours. The only "problem" you can have is to have your software version changed to v20c, which if I remember correctly, can be fixed using Bootstacks), transfer it to your phone and open Terminal Emulator. Then input the following commands:
su
dd if=(aboot.bin storage directory) of=/dev/block/platform/msm_sdcc.1/by-name/aboot
Then, go to flashify and flash your custom recovery image (TWRP or CWM) in the flash recovery img option. After this, reboot into recovery by pressing Volume Down + Power and when you see the LG Logo, let go of the Power button and press it again. Then select yes two times with the volume keys for selection and power button to actually select the options (Don't worry, your device won't be factory resetted if you successfully installed custom recovery). Then, if you want, make a backup of your entire phone (recommended, just in case something goes wrong or if you just want your apps back when the process is done) in the Backup section and then do a factory reset through the Wipe option (Don't select anything, just swipe the bar). Select the Install option and select your ROM zip. After this, do the same process as the ROM installation but this time with Gapps zip. There you go, now you have CM13 installed. If you want root again, you don't have to install Kingroot again this time, as CM13 has built-in root, just enable Developer options and activate root and you're ready to go. Also, if you want the apps you had before the installation, just restore your backup (ONLY THE DATA PARTITION, otherwise CM13 will be uninstalled and replaced with stock ROM). If something goes wrong and you accidentally brick your device, just reply and I'll help you fix it. (If helped, click the Thanks! button)
Hyoretsu said:
Grab this file: http://forum.xda-developers.com/lg-...0w7xxshoxx-t2826150/post54358527#post54358527 (D405n_v20a_patched_aboot, don't worry, it's okay if you flash a different software version aboot as long as it's the same device as yours. The only "problem" you can have is to have your software version changed to v20c, which if I remember correctly, can be fixed using Bootstacks), transfer it to your phone and open Terminal Emulator. Then input the following commands:
su
dd if=(aboot.bin storage directory) of=/dev/block/platform/msm_sdcc.1/by-name/aboot
Click to expand...
Click to collapse
Hi, thank you so much, I finally rooted my device but I am having problems with the script part of the terminal emulator.
I wrote upto msm_sd and then this happen automatically:
View attachment 3865360
View attachment 3865361
View attachment 3865362
View attachment 3865363
I don't know what to do here..
EDIT: Also am I meant to have the SuperSU/SuperUser app installed once rooted? Then get a popup in the terminal emulator for permission for its root access?
Firebird3334 said:
Hi, thank you so much, I finally rooted my device but I am having problems with the script part of the terminal emulator.
I wrote upto msm_sd and then this happen automatically:
View attachment 3865360
View attachment 3865361
View attachment 3865362
View attachment 3865363
I don't know what to do here..
EDIT: Also am I meant to have the SuperSU/SuperUser app installed once rooted? Then get a popup in the terminal emulator for permission for its root access?
Click to expand...
Click to collapse
You have to change "(aboot.bin storage directory) with the directory in which aboot.bin is stored. And no, you don't need SuperSU, when you use the su command, a KingRoot window will open, just say yes.
EDIT: Wahay! It works! Thank you soo much for your help!
EDIT 2: I can't seem to find the option to edit my recent button in settings. What can I do?
Firebird3334 said:
EDIT: Wahay! It works! Thank you soo much for your help!
EDIT 2: I can't seem to find the option to edit my recent button in settings. What can I do?
Click to expand...
Click to collapse
If it's the menu button, I don't know of any way to change them, as Android updates change them. For example, my phone in KitKat used the home button for recent apps, in Lollipop it used the menu button for recent apps, and when I installed CM13, it used the home button again.
EDIT: Browsing LG L90 xda, I found this: http://forum.xda-developers.com/lg-l90/themes-apps/mod-button-remaps-l90-t3145146
Hyoretsu said:
If it's the menu button, I don't know of any way to change them, as Android updates change them. For example, my phone in KitKat used the home button for recent apps, in Lollipop it used the menu button for recent apps, and when I installed CM13, it used the home button again.
EDIT: Browsing LG L90 xda, I found this: http://forum.xda-developers.com/lg-l90/themes-apps/mod-button-remaps-l90-t3145146
Click to expand...
Click to collapse
You have helped me out so much already! Thank you so much!
But just one more thing though, could you explain how to install magisk and xposed in layman's term so I can use Android Pay?
I don't know what magisk is nor layman's term, but to install Xposed just go to this thread: http://forum.xda-developers.com/showthread.php?t=3034811, download both Xposed installer apk and xposed zip. Install xposed apk and flash xposed zip
Hello,
Help me please I'm getting Error 7 and after twrp reflash Error executing updater binary in zip
I did all the previus steps phone LG L90 d405n is rooted and bootloader is unlocked and rom downgraded to KK v10b
Now I want to flash CM or RR rom but I simply can't!
First I was getting error 7 when flashing I found out that I need TWRP 2.8.7 build 2 to flash so I found it and flashed. Now I'm getting ''error executing updater binary in zip twrp'' and I can't flash any rom.?*
I tried deleting first assert lines in updater-script from this?*thread?*but It didn't helped in any way...
Any ideas? Why the hell it is so ****ing complicated to flash custom on this ****ty device? Can't it work like Nexus4 or any other normal device??*
Thanks in advance for any tips&trics
PS. I can't open new thread dunno why...
amonlb said:
Hello,
Help me please I'm getting Error 7 and after twrp reflash Error executing updater binary in zip
I did all the previus steps phone LG L90 d405n is rooted and bootloader is unlocked and rom downgraded to KK v10b
Now I want to flash CM or RR rom but I simply can't!
First I was getting error 7 when flashing I found out that I need TWRP 2.8.7 build 2 to flash so I found it and flashed. Now I'm getting ''error executing updater binary in zip twrp'' and I can't flash any rom.?*
I tried deleting first assert lines in updater-script from this?*thread?*but It didn't helped in any way...
Any ideas? Why the hell it is so ****ing complicated to flash custom on this ****ty device? Can't it work like Nexus4 or any other normal device??*
Thanks in advance for any tips&trics
PS. I can't open new thread dunno why...
Click to expand...
Click to collapse
First of all, you don't need to use that TWRP build, you can use the latest one. To fix the only errors that should appear (Updater error 7 and 6), delete the first lines of updater-script until you reach the ui_print part (the first line of your file should be "ui_print("Target: 1471683591");"). Also, delete any double spaces that exist (there should be two, one before "abort" at line 27 and the other before "abort" at line 30). If it still gives the same error, try wiping Cache, data, system and dalvik-cache partitions, try to install the ROM, it'll give the error. Now, reboot your phone and try to install without wiping anything. (To properly see the line indications, open the file using Notepad++)
Hi,
Today I will introduce the changes you can make to your Huawei P9 lite device.
These methods have been tested on my VNS-L31C432 and it's work on B130 update and earlier.
Sorry in advance for my incorrect syntax in inglish, i'am french user
1. Update to latest version
If your device is NOT ROOTED install the OTA update.
Otherwise place a folder named "dload" into you external or internal SD card and put update file (unzipped) on this folder.
Update for VNS-L31C432BXXX to VNS-L31C432B130 dual-sim, european version here >> https://www.hidrive.strato.com/lnk/H2ljl9lt
Turn off your device.
Hold volume up/down and power button for a long time.... Update starts automatically after this.
If your device is bricked, do not format the partition (except dalvik and cache) and go update (this update is a full version, your system will be restored).
2. Unlock Bootloader/install TWRP/Root your device
Follow this steps >> http://forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
if you have problems to get the unlocking code, log on Huawei site with your Facebook login, CHOOSE your device model and click request the code, enter the requested information, done!
TWRP 3.0.2.0 work but nandroid backup doesn't work!
For solve this, install the "TWRP Manager" app and go backup page, done!!!
(If you need set SElinux in permissive mode please read below).
3. Set SElinux to permissive mode for ever!
Download "Terminal IDE" app.
Open it and run this:
(please, type a command at a time)
Code:
su
mount -o remount,rw /system
mkdir /system/su.d
echo "#!/system/bin/sh" > /system/su.d/permissive.sh
echo "setenforce 0" > /system/su.d/permissive.sh
echo "0" > /sys/fs/selinux/enforce
chmod 755 /system/su.d/permissive.sh
restart your device, done!
4. Install Xposed Frameworks
Follow this step >> http://forum.xda-developers.com/huawei-p9lite/how-to/guide-xposed-p9-lite-t3425315 and chose this version >> http://dl-xda.xposed.info/framework/sdk23/arm64/xposed-v86-sdk23-arm64.zip (xposed-v86-sdk23-arm64 work fine, no battery drained).
5. Best Xposed module worked fine
Here are some useful and functional modules (not exhaustive list..)
-Amplify (for battery saving)
-Greenify (for battery saving)
-BootManager (for chose your apps in start on boot)
-Play Store Changelog (to display your apps and update at the opening of the Play Store)
-WiFiKeyView (view your wifi key in new tab at wifi setting. Little bug your key is not visible but copy your key and past on a note worked)
-XInternalSD (chage the path to dowload file from Chrome >> external SD) (work on other app )
-VolumeSteps+ (If you find that your volume increases too quickly, This module add steps in the volume bar! Customisable)
-ActivityForceNewTask (Force app open in correct app)
-Force Immersive Mode (Force immersive mode in your app, customisable)
-VirtualSensor (Material emulation of gyroscop, not worked with pogo dev running for this isue)
-AdBlocker and Lucky Patcher Module (I'm not sure that really works..)
6. Use your External SD on Internal (Full supported!!)
This trick enable the official feature "adoptable storage" on your Marshmallow with EMUI. better than Link2SD.
-Connect your device in your PC.
-Run ADB and run this comand:
Code:
adb shell
sm list-disks
you will see a number, that is the identifier of your SD card. For example "159,49".
Run this comand (replace YOUR_SD_IDENTIFIER ):
Code:
sm partition disk:YOUR_SD_IDENTIFIER mixed:50
Done, your external SD have 50% of memory for external and 50% for internal emulation.
Next, appointment in your storage settings and check the total capacity of the device! It may appear 0.00 o available, it's just a visual bug don't worries
Use a "DiskInfo" app or a file explorer for see correctly values.
7. BONUS play the walking dead season 1 and 2 on your P9 lite
I love this game! But device not suported..
the only solution is to take a file from the game with the unlocked level ...
Version named "Mali".
I hope you enjoyed my guide if you have questions or other tricks leave a comment.
Thanks!
nice guide, thinking myself do one like this, but can be improved... add multi user, multi window, calling recorder, substratum/layer support, build.prop mods, smart-e, smart cover etc
Therand said:
...
Hold volume up/down and power button for a long time.... Update starts automatically after this.
...
Click to expand...
Click to collapse
I was trying this some time ago...
With TWRP, I was just getting booted into TWRP. Is there something I'm doing wrong or is it just me? I would appreciate any suggestions.
Thank you Snapdesign, If you have more info to add , I would edit the post and I would quote you.
Zeruno, TWRP, stock recovery and stock updater some many diferent. if you don't remove it, you have full acces on it.
Your device is shutdown, hold volume up + volume down + power and don't release it before the updater screen appears!
normally it works...
Therand said:
Thank you Snapdesign, If you have more info to add , I would edit the post and I would quote you.
Zeruno, TWRP, stock recovery and stock updater some many diferent. if you don't remove it, you have full acces on it.
Your device is shutdown, hold volume up + volume down + power and don't release it before the updater screen appears!
normally it works...
Click to expand...
Click to collapse
Yep there's my problem -- updater screen never comes but TWRP loads instead. I wonder if there is some adb command?! That would solve a problem.
i do not think there is an command to go in the updater..
Wait for a more positive response from another user
Or try this at your risk...
Put any file for update (update.app, META-INF, ...) On a .zip archive named "update.zip" and place in your adb folder.
Connect your device on PC launch adb and run this:
Code:
Adb reboot bootloader
Wait for see bootloader screen and run:
Code:
Adb sideload update.zip
I not tested personally this method...
Otherwise place a folder named "dload" into you external or internal SD card and put update file (unzipped) on this folder.
Update for VNS-L31C432BXXX to VNS-L31C432B130 dual-sim, european version here >> https://www.hidrive.strato.com/lnk/H2ljl9lt
Turn off your device.
Hold volume up/down and power button for a long time.... Update starts automatically after this.
If your device is bricked, do not format the partition (except dalvik and cache) and go update (this update is a full version, your system will be restored).
Click to expand...
Click to collapse
Is this the procedure if your phone is rooted but you still want to install the OTA? (My current situation)
This method work on a rooted and no-rooted device.
The root "disable" the OTA function.
Don't try OTA on stock app update in your setting if your device is rooted.
The trick to use ext sd to increase space works with both stock and root or only with root?
Inviato dal mio SM-N9005 utilizzando Tapatalk
This trick no need a su promp comand.
Su command is only available for root user.
Trick work on no root acces
EDIT: im not sur if adb shell work for guest user.. try it
After lot of test, this version Xposed Framework is not a better for P9 lite.
Version unmodified v86 work fine with resource hook activated!
The direct download link >> http://dl-xda.xposed.info/framework/sdk23/arm64/xposed-v86-sdk23-arm64.zip
Therand said:
1. Update to latest version
If your device is NOT ROOTED install the OTA update.
Otherwise place a folder named "dload" into you external or internal SD card and put update file (unzipped) on this folder.
Update for VNS-L31C432BXXX to VNS-L31C432B130 dual-sim, european version here >> https://www.hidrive.strato.com/lnk/H2ljl9lt
Turn off your device.
Hold volume up/down and power button for a long time.... Update starts automatically after this.
Click to expand...
Click to collapse
Hello,
will this trick work even with TWRP recovery or only with stock recovery? is there any other way to install OTA updates if I have TWRP and root?
SwH.85 said:
Hello,
will this trick work even with TWRP recovery or only with stock recovery? is there any other way to install OTA updates if I have TWRP and root?
Click to expand...
Click to collapse
This trick work on a rooted or stock device.
Work only with stock updater.
Is not possible to update with OTA if your device is rooted, no isue.
If you proced a manual install, your device lost the root and your bootloader re-lock automatically.
Possible to re-unlock and re-root after this update.
Therand said:
After lot of test, this version Xposed Framework is not a better for P9 lite.
Version unmodified v86 work fine with resource hook activated!
The direct download link >> http://dl-xda.xposed.info/framework/sdk23/arm64/xposed-v86-sdk23-arm64.zip
Click to expand...
Click to collapse
I'm with xposed-v86.0-sdk23-arm64 by-wanam, but in fact i see in xposed the oficial xposed-v86-sdk23-arm64.zip showing as compatible with huawei devices.
So, how can i change it, in a safe way?
Nomatrix said:
I'm with xposed-v86.0-sdk23-arm64 by-wanam, but in fact i see in xposed the oficial xposed-v86-sdk23-arm64.zip showing as compatible with huawei devices.
So, how can i change it, in a safe way?
Click to expand...
Click to collapse
Version 86 by wanam possible drain battery faster...
For use version 86 unmodifier follow steps:
1. Unistall your framework with this zip file >> http://dl-xda.xposed.info/framework/uninstaller/xposed-uninstaller-20160829-arm64.zip flash zip with TWRP recovery and reboot.
2.Install the v86 framework with TWRP recovery, reboot
3. Done
About the 6th step, is it reversible? Once I've done it, can I change it again to what it used to be?
Thank you
inrope said:
About the 6th step, is it reversible? Once I've done it, can I change it again to what it used to be?
Thank you
Click to expand...
Click to collapse
use root essentials... much easier... you can revert but be aware that you might lose some data
Hi guys, I have two questions. First, how can I move apps data from internal memory to SD card? And second, does our phone have a front camera flash? Thanks
so it is possible to use my sd card as internal storage? how will this be displayed in my os?
does it just think of it as 1 bigger internal sd or something else? just want to make sure before buying the phone .
also, is the huawei p9 lite a good phone to be rooted and used with custom firmware (e.g. supportive community etc.)
thank you very much in advance for answers!
have a nice day everybody
Kyrok said:
so it is possible to use my sd card as internal storage? how will this be displayed in my os?
does it just think of it as 1 bigger internal sd or something else? just want to make sure before buying the phone .
also, is the huawei p9 lite a good phone to be rooted and used with custom firmware (e.g. supportive community etc.)
thank you very much in advance for answers!
have a nice day everybody
Click to expand...
Click to collapse
Adoptable storage for SD card is not available in stock firmware due to EMUI security policy. But you can do it in custom firmware based on AOSP.
P9 Lite has fully functional CyanogenMod, SlimRom, Resurrection Remix, MedRom (based on stock EMUI 4.1.1 Android 6) and Revolution OS ( Bases on stock EMUI 5.0 Android 7).
(other thread here)
It seems that a Magisk module that I have recent installed (no idea which one) is preventing my phone to boot correctly. I know that because reflashing the latest OTA update removes Magisk and then it works perfectly. As soon as I flash Magisk, it doesn't boot anymore.
Even after flashing SuperSU, Magisk Manager doesn't let me see/remove installed modules.
Is there a way to do that?
zdimension said:
(other thread here)
It seems that a Magisk module that I have recent installed (no idea which one) is preventing my phone to boot correctly. I know that because reflashing the latest OTA update removes Magisk and then it works perfectly. As soon as I flash Magisk, it doesn't boot anymore.
Even after flashing SuperSU, Magisk Manager doesn't let me see/remove installed modules.
Is there a way to do that?
Click to expand...
Click to collapse
Use mount-magisk.zip found in collection of modules thread and delete the folder via twrp in /magisk
@duxishere Thanks so much!
I searched for "Magisk module offline uninstall" but did find anything. This was exactly what I needed! The culprit was App Systemizer. I've had it installed for some time and it didn't cause any problems. I uninstalled it, and it worked! Flashing it again restored the boot problem.
zdimension said:
@duxishere Thanks so much!
I searched for "Magisk module offline uninstall" but did find anything. This was exactly what I needed! The culprit was App Systemizer. I've had it installed for some time and it didn't cause any problems. I uninstalled it, and it worked! Flashing it again restored the boot problem.
Click to expand...
Click to collapse
How did you uninstalled the troubled module?
I'm having the same problem with a module but I don't even have a /magisk folder.
gonsa said:
How did you uninstalled the troubled module?
I'm having the same problem with a module but I don't even have a /magisk folder.
Click to expand...
Click to collapse
Start reading the thread from the beginning and you'll find it.
gonsa said:
How did you uninstalled the troubled module?
I'm having the same problem with a module but I don't even have a /magisk folder.
Click to expand...
Click to collapse
Install "Uninstaller Mod Magisk" from TWRP. Then go in the TWRP terminal and type uninmod_magisk and follow the instructions.
please post the link to thread unistaller magisk module, to other users follow the solution!
edit:
there is https://forum.xda-developers.com/showpost.php?p=72542167&postcount=242
nodio said:
please post the link to thread unistaller magisk module, to other users follow the solution!
edit:
there is https://forum.xda-developers.com/showpost.php?p=72542167&postcount=242
Click to expand...
Click to collapse
Not working for me!
I will uninstall "Audio Compatibility Patch" V1.0 from zackptg5 & ahrion
In Magisk Manger Status is always " Module will be updated at the next start"
If i use the "TWRP-Uninstaller" the Modul is not in List!
dewois said:
Not working for me!
I will uninstall "Audio Compatibility Pach" V1.0 from zackptg5 & ahrion
In Magisk Manger Status is always " Module will be updated at the next start"
If i use the "TWRP-Uninstaller" the Modul is not in List!
Click to expand...
Click to collapse
https://www.didgeridoohan.com/magisk/Magisk#hn_Module_will_be_updated_at_next_reboot
Didgeridoohan said:
https://www.didgeridoohan.com/magisk/Magisk#hn_Module_will_be_updated_at_next_reboot
Click to expand...
Click to collapse
".... Go the module folder under /sbin/.core/img ..."
I dont have this folder in /sbin!
tobi14 said:
".... Go the module folder under /sbin/.core/img ..."
I dont have this folder in /sbin!
Click to expand...
Click to collapse
If you have a current version of Magisk installed, yes you do. Enable viewing hidden files and folders in your file explorer. The dot at the beginning of the folder name means it's hidden...
zdimension said:
(other thread here)
It seems that a Magisk module that I have recent installed (no idea which one) is preventing my phone to boot correctly. I know that because reflashing the latest OTA update removes Magisk and then it works perfectly. As soon as I flash Magisk, it doesn't boot anymore.
Even after flashing SuperSU, Magisk Manager doesn't let me see/remove installed modules.
Is there a way to do that?
Click to expand...
Click to collapse
If you can launch TWRP then :
Check magisk.img exist
1. Go to "advanced" and then click on "File Explorer".
2. Check there is "magisk.img" file under "/data"
Backup magisk.img
1. Go to "advanced" and then click on "terminal command".
2. type following command
Code:
cp /data/magisk.img /data/magisk.img.bk
Mount magisk.img
1. Make a temp folder
Code:
mkdir /mktmp
2. Mount magisk.img to /mktmp
Code:
mount -o loop /data/magisk.img /mktmp
3. Navigate to mktmp and remove your module
Code:
cd /mktmp
rm -rf /mktmp/xxxx
Unmount magisk.img and reboot to check if it's work
1. Unmount magisk.img
Code:
umont /mktmp
2. Leave terminal and reboot the phone
3. Enjoy!
mklee11224 said:
If you can launch TWRP then :
Check magisk.img exist
1. Go to "advanced" and then click on "File Explorer".
2. Check there is "magisk.img" file under "/data"
Backup magisk.img
1. Go to "advanced" and then click on "terminal command".
2. type following command
Code:
cp /data/magisk.img /data/magisk.img.bk
Mount magisk.img
1. Make a temp folder
Code:
mkdir /mktmp
2. Mount magisk.img to /mktmp
Code:
mount -o loop /data/magisk.img /mktmp
3. Navigate to mktmp and remove your module
Code:
cd /mktmp
rm -rf /mktmp/xxxx
Unmount magisk.img and reboot to check if it's work
1. Unmount magisk.img
Code:
umont /mktmp
2. Leave terminal and reboot the phone
3. Enjoy!
Click to expand...
Click to collapse
Thanks mate ! it worked like a charm !
just use "ls" command on step 3 after changing directory to mktmp , to show installed modules.:silly:
My Phone Specification : Moto X Play ------ 7.1.1 Stock Firmware -------- Squid kernel --------- rooted using Magisk ------ systemless xposed module "xposed_25" installed using magisk module(Uninstalled by this method !) .:victory:
Tanks a lot!
Crossbreeder lite made my phone unusable. Working fine again!
magisk.img not found in /data
This works like charm, if you can't find the magisk.img in `/data` check `/data/adb` ... I hope this work .
Didgeridoohan said:
https://www.didgeridoohan.com/magisk/Magisk#hn_Module_will_be_updated_at_next_reboot
Click to expand...
Click to collapse
Own domain huh? Business growing? Hehehe I only came for the uninstall zip, hey quick question, I'm on a micro sd-less phone (big news), still a flashaholic, kinda, but my phone so happens to require a data format every time for gsi's, where would you recommend keeping the "things to keep on your device" (Magisk related) so i don't have to carry an otg and drive everywhere i go? Thank you sir, you almost get more thanks than posts! Talk about reputation!
culiacanazo said:
Own domain huh?
Click to expand...
Click to collapse
I keep a few of them around. It was nice to finally find a good use for that one...
but my phone so happens to require a data format every time for gsi's, where would you recommend keeping the "things to keep on your device" (Magisk related) so i don't have to carry an otg and drive everywhere i go?
Click to expand...
Click to collapse
Do you have to completely wipe the device? Or can you keep internal storage intact? If not, it sounds like you're out of luck.
Nice thread hijack, by the way... :laugh:
Didgeridoohan said:
Do you have to completely wipe the device?
Click to expand...
Click to collapse
Well i do a factory reset, flash system img and reboot, let it loop because it will, and then do a data format before it will boot, so system, caches, and data go... (Huawei, see)
Didgeridoohan said:
Nice thread hijack, by the way... :laugh:
Click to expand...
Click to collapse
I kinda stayed on topic didn't i? :crying:
You linked to your help guide which i read the beginning of that by the way has nothing to do with the help you offered to the op and reminded me of my struggles with a totally different device and problem!!
It's like how I'm related to my grandma's cousin's wife's sister's doctor's neighbor's son's friend, ain't it?
Sent from my Huawei Mate 10 Pro using XDA Labs
Would be cool if someone could share the adb solution. In the FAQ is just written "email me for this" wtf?!? It is ****ing anoying to reflash the whole system everytime a module isnt working (yeah thats what you need to do if your device doesnt have twrp, and a lot of a/b devices dont have twrp). Also you need to delete all user datas because you flashed the system new and the new system doesnt know the encryption key for the user datas. There need to be a better solution than using twrp or email the dev for adb solution.
The easiest way would be to make it possible that magisk manager can manage (remove/deactivate) the modules while there is no patched boot.img installed. This would solve all problems related to a/b devices without twrp and magisk modules (not booting or anything else) just flash stock boot.img remove the problematic module flash patched boot.img and done. This is not possible because the module section in magisk manager is hidden when there is no patched boot.img installed.
Second thing i noticed, magisk manager doesnt reset the active modules when you wipe the app data. This should be a MUST. Would also solve the problem of not booting modules without wiping the whole system on a/b devices without twrp.
Apply .disable_magisk
saturday_night said:
Would be cool if someone could share the adb solution. In the FAQ is just written "email me for this" wtf?!? It is ****ing anoying to reflash the whole system everytime a module isnt working (yeah thats what you need to do if your device doesnt have twrp, and a lot of a/b devices dont have twrp). Also you need to delete all user datas because you flashed the system new and the new system doesnt know the encryption key for the user datas. There need to be a better solution than using twrp or email the dev for adb solution.
The easiest way would be to make it possible that magisk manager can manage (remove/deactivate) the modules while there is no patched boot.img installed. This would solve all problems related to a/b devices without twrp and magisk modules (not booting or anything else) just flash stock boot.img remove the problematic module flash patched boot.img and done. This is not possible because the module section in magisk manager is hidden when there is no patched boot.img installed.
Second thing i noticed, magisk manager doesnt reset the active modules when you wipe the app data. This should be a MUST. Would also solve the problem of not booting modules without wiping the whole system on a/b devices without twrp.
Click to expand...
Click to collapse
Hi!. I have this user of XDA Dev. hanging out for a time... well the fact is I'm new. My problem (not the only one) maybe merge a kind of solution to this. And this could be putting the ".disable_magisk" blank file inside the cache partition as an ADB Sideload update.
Next to this. I've found that to do that it's not as simply as it seems to be cause I'm on a Samsung Galaxy S7 Nougat 7.0 Version. And all the examples with update-binary file I have, are from downgrade versions...
I'm stuck in a bootloop due to the Magisk Xposed SDK 24 module. I think this module & encription is not good (as I've read on the Xpose module thread).
So, here I'm asking how to make an script to run directly on the Stock recovery using ADB Sideload, which will put the blank ".disable_magisk" file inside the /cache partition. I need just this, and I think this could help some people who are stuck on this issue.
Now, I have this Thread. But really I need the advice of an expert telling me what to do in order to achieve this. As I think this is an easy labor, but you have to know how to do it... If someone is able to clarify please, I will appreciate so much.
Thanks!
---------- Post added at 05:51 PM ---------- Previous post was at 05:41 PM ----------
neromanello said:
Hi!. I have this user of XDA Dev. hanging out for a time... well the fact is I'm new. My problem (not the only one) maybe merge a kind of solution to this. And this could be putting the ".disable_magisk" blank file inside the cache partition as an ADB Sideload update.
Next to this. I've found that to do that it's not as simply as it seems to be cause I'm on a Samsung Galaxy S7 Nougat 7.0 Version. And all the examples with update-binary file I have, are from downgrade versions...
I'm stuck in a bootloop due to the Magisk Xposed SDK 24 module. I think this module & encription is not good (as I've read on the Xpose module thread).
So, here I'm asking how to make an script to run directly on the Stock recovery using ADB Sideload, which will put the blank ".disable_magisk" file inside the /cache partition. I need just this, and I think this could help some people who are stuck on this issue.
Now, I have this Thread. But really I need the advice of an expert telling me what to do in order to achieve this. As I think this is an easy labor, but you have to know how to do it... If someone is able to clarify please, I will appreciate so much.
Thanks!
Click to expand...
Click to collapse
I need to know how to locate the mount point of my /cache partition at the stock recovery ADB Sideload. Then, to mount it, transfer the blank file to it, and then unmount /cache. I think it's an easy labor. So here my incomplete updater-script:
ui_print("Trying to make an script with ADB Sideload..."); CRLF
ui_print("Creating file to disable Magisk Modules..."); CRLF
I NEED THE MOUNT POINT HERE CRLF
ifelse package_extract_file(".disable_magisk", "/cache/.disable_magisk") == "t", ui_print("OK!"), ui_print("Failed!"); CRLF
UNMOUNT COMMAND HERE. CRLF
--last blank line--
So, I need to complete that, BUT things gets difficult when I need the update-binary for my Nougat 7.0 version, and to sign the whole .zip file in order my stock recovery recognizes it. I think this last thing could be made by this Thread. But really I don't know. Please help.
Thanks!.
Disclaimer: Your warranty will be void, use at your own risk. YOU are choosing to make these modifications and I am not responsible for any damages these changes might do to your device or sanity.
Hi.
Based on the feedback from this thread, the following steps can be used to aquire root on the SM-T590. The process is quite similar to rooting other devices by using Magisk. It might also work on other versions of the SM-T59x family, which can be OEM unlocked (sorry Verizon users).
Obtain the boot image
Get the firmware that matches the version installed on your device. This is important, otherwise you can easily end up in a bootloop.
Extract the AP tar.md5 file, e.g. "AP_T590XXU2ARJ1_CL14463952_QB20043720_REV00_user_low_ship_MULTI_CERT_meta.tar.md5".
Upon the extracted files, there is a file called boot.img.lz4. Extract it. Important: Most standard compression tools, e.g. 7-zip, are unable to extract lz4 compression ccorrectly. Use the offical lz4 binary from your Linux distribution or get the Windows version here. Once extracted, you should have a file called boot.img.
Patch the boot image
Copy the boot.img file to your device.
Download and install the Magisk Manager apk from the offical Magisk Thread.
In Magisk Manager settings, set the image format to "img.tar".
Enable the "Keep AVB2.0/dm-verity" in the Magisk main screen.
Hit "Install" and select "Patch boot image".
Select the boot image copied previously to your device.
Once finished, the patched image will be located in the Download directory on the internal storage.
Copy the patched image back to your PC.
Unlock and flash
Go into settings and enable developer settings.
In the developer settings, select OEM unlock, read the help text and enable the unlock, if you consent.
Once the device is factory reset and rebooted, turn the device off.
Boot the tablet into download mode.
Flash the patched boot image with Odin in the AP-slot
Reboot, Install Magisk Manager apk again and check if root is available.
Have fun.
Thanks to @gscollier, @airmaxx23 and @EinsamerSpieler for testing.
Rooting works but having the same problem as the others. Modifying system files leads to reboot.... damn
J.Edwards(not the killer) said:
Rooting works but having the same problem as the others. Modifying system files leads to reboot.... damn
Click to expand...
Click to collapse
Yes, there is such problem.
I have Root Explorer app installed
When I try to move some app from "/data/app" to "/system/priv-app" (using Root Explorer) the device reboots and nothing is being saved at "/system/priv-app"
I want to make my app a system one
This method works ok on many other devices
Any ideas how to solve this problem?
I think system apps Device Security and Device Maintenance prevents me to do it.
I tried to delete them using Titanium Backup but phone reboots and they are installed again
Also there is Samsung Knox security technology
J.Edwards(not the killer) said:
Rooting works but having the same problem as the others. Modifying system files leads to reboot.... damn
Click to expand...
Click to collapse
did you find a solution?
stupid question
I know this is a dumb question but where do you get the firmware....
Also was wondering if that reboot thing is still an issue.
I'll still root, I would like to try the LineageOS, eventually... how well does this work with Android apps/F-droid?
Update: still looking for confirmation on which boot image to use... guess you can't do a backup before flashing like you used to be able to do.
I installed heimdall and adb both seem to work
heimdall instructions
User848 said:
Yes, there is such problem.
I have Root Explorer app installed
When I try to move some app from "/data/app" to "/system/priv-app" (using Root Explorer) the device reboots and nothing is being saved at "/system/priv-app"
I want to make my app a system one
This method works ok on many other devices
Any ideas how to solve this problem?
I think system apps Device Security and Device Maintenance prevents me to do it.
I tried to delete them using Titanium Backup but phone reboots and they are installed again
Also there is Samsung Knox security technology
Click to expand...
Click to collapse
the same happens to me.
I also tried removing some microsoft apps with Titanium, but after removing the excel, it goes to a kernel panic...
And then there's the "Security notice" from "SecurityLogAgent" notifications (unauthorised actions have been detected, unauthorised access to a secured area)
any solutions, followed steps but no root
I have the same problem Root is present but once i try to rename a file in /system/app, the device reboots.
Using SM-T590 with canadian image:T590XXU2ASC1
Using Magisk version V7.1.2(208) - V19.1 (19100)
I Found this procedure inside git magisk code:
https://github.com/topjohnwu/Magisk/blob/master/docs/samsung.md
Follow the Instructions part and it should work.
Quick help please, I have the patched boot image on my pc but when I click the AP slot on odin it doesnt detect it only finds tar, md5 files etc. in the settings i cant change the format to .tar there is no option.
IET_DEMO said:
I Found this procedure inside git magisk code:
https://github.com/topjohnwu/Magisk/blob/master/docs/samsung.md
Follow the Instructions part and it should work.
Click to expand...
Click to collapse
Be advised it's for Android 9 (Pie)
You can try to patch entire AP file, but I was told 19.1 may have problem. Try 18.0 first and see.
Unfortunately, there's no TWRP at this time
mingkee said:
Be advised it's for Android 9 (Pie)
You can try to patch entire AP file, but I was told 19.1 may have problem. Try 18.0 first and see.
Unfortunately, there's no TWRP at this time
Click to expand...
Click to collapse
Well I did it on android 8.1.0, seems like it work on Oreo too
IET_DEMO said:
Well I did it on android 8.1.0, seems like it work on Oreo too
Click to expand...
Click to collapse
How about Titanium Backup?
It works on rooted T510
mingkee said:
How about Titanium Backup?
It works on rooted T510
Click to expand...
Click to collapse
I dont have or use Titanium Backup, I usually clone my devices with twrp backup
There needs to be a better option that works without the current issues when rooting. You either end up with reboots or can not log in to Samsung account at all
For anyone who needs it, here's the latest tar for both stock boot and the magisk patched boot. works in Pie.
kidkrooks said:
For anyone who needs it, here's the latest tar for both stock boot and the magisk patched boot. works in Pie.
Click to expand...
Click to collapse
Would it work on 595? Bootloaders should be the same without boot loop?
vq8acsxht said:
Would it work on 595? Bootloaders should be the same without boot loop?
Click to expand...
Click to collapse
I honestly don't know as I don't have a 595. I took a chance on mine and it worked
kidkrooks said:
I honestly don't know as I don't have a 595. I took a chance on mine and it worked
Click to expand...
Click to collapse
Mine is on it's way. I will try it when I get it. I think bootloaders should be same in in both 590/595.
kidkrooks said:
For anyone who needs it, here's the latest tar for both stock boot and the magisk patched boot. works in Pie.
Click to expand...
Click to collapse
Does this still have "Modifying system files leads to reboot" issue or it's solved ?