Related
i have had no problems before, i flashed a couple roms in it before, but in the end, i kept very lightly modded rom very close to OEM rom for the tilt that i got from here. all was well for months and months.. until now.
i noticed that the phone will lose signal. and not detect a sim card anymore. at first i thought it was sim. so i tried it on my other tilt (i have 2) and i determined that its the phone.
if i restart it, it works for about 1 min or less if im lucky.. then i have to to go comm. manager, turn off phone signal, and turn it back on, usually, that does the trick. but now, that wont even work anymore.
the only way to get the sim recognized again is if i slide the phone out, go to comm. manager, turn off phone and turn back on, and LEAVE the phone slided out. once i slide the phone back in, it will not detect the sim. ive tried diff. spl, different roms, and searched before i came back here.
ive had it for over a year, have broken the screen and messed up keyboard by closing hood of my car on it,
but ive fixed it. and that was long ago. maybe this new problem is because of this. if someone had similar problems, let me know what you did. or if anyone can point me into the next direction. i guess ill have to crack it open again.
I had a similiar issue where my phone would turn on ok, then lose signal and then get the no sim card error (dialer screen). What I ended up doing was taking a piece of tape and put it on the back of the sim card then slid it into the holder and locked it. (It was a thick metal tape, if you use scotch tape I recommend using a few pieces). Once I did that I havent had another problem with it. Its a pain to get the sim out of the phone because it ruins the tape but I would rather deal with that than not have my phone work correctly.
Let me know if that works for ya.
Jim
i see. so it seems that your problem was that the sim shifted out of place sometimes... i will try that. hope it works. its so odd that my sim card dissapears when i close my tilt
I just recently had a similar problem and I finally figured out it was a bad contact with the SIM card. you can either use the tape trick, or if you have a steady hand, take a thin object (such as a paper clip or glasses screwdriver) and very gently lift the contacts up underneath of where the sim card goes. they may have been pushed down due to abnormal pressure exerted on the back of your phone, I think that's what happened to mine.
thanks for your help. the sim contact issue was the first thing i suspected, AND tried. i used a needle. i raised the level of each of the 8 contacts making sure the sim will make contact with each pin. but the problem remains.
i will try this again. to double check. i will respond with the results
i tried pushing the pins up a little bit again, i still have the same problem
*but now i have an update, it seems that the sim card stops being detected right before i actually fully slide the phone back in. for examplle, before the slide-in tone is played, and before the screen tilts back.
i already took it apart for a look inside, everything seems fine. and i dnt really know wht to look for.
Hi,
was reading about ur issue, just tought on jumping into the wagon, I suspect it might be the flex cable that connects the sim to the motherboard, if there is such cable, i haven't opened my kaiser yet but my Pioneer car radio has this flex cable issue when the drive is closed the screen turns on and the whole radio but as soon as you press eject (the face will scroll and unveil the cd slot) the radio actually turns off and i have to move the face back to its original position in order to work. At the end I took the flex cable out and 1/4 of it was teared, in the end I had to order a new part
thanks so much for your help. i guess there is nothing left to do but to take it all apart. somewhat blindly. at least i know what to look for. bad cables, contacts... im clueless as to whether it can be a bad grounding issue? or a short. i dnt know. i guess i may be the first one to experience a problem like this on a tilt.
so i will do my best to get this problem resolved. and maybe include some pictures if it is intereting enough
my tilt totally stopped recognizing the sim.. it first happened when i dropped it and had to keep it open to keep contact.. then i was sitting with it open and tilted up, it fell and closed somehow and now the sim isnt there at all... i guess something is disconnected or whatever, im afraid to take it apart, but its either that or a paper weight.
New Sim
I had a similar problem. My sim card would disappear on occasion then one day I woke up and no phone. Just an annoying sim card not installed message. Checked the phone by putting in a known working sim card and it was fine. Called ATT for a new sim card and now my phone is working. Try a new SIM CARD.
For the original poster -- that fact that it works when the keyboard is in one position but not the other indicates that it is likely a bad flex cable.
Agreed
Its most likely the cable. I used a new SIM, the extra pressure trick, cleaned contact, etc on mine yesterday, but the problem remained.
I got a used Tilt from Craigsliist , reusing the SIM and case, and it works great.
i wonder if anyone has bought this item before and if it works? upon research, i think our problem comes from the sim card flex and ribbon:
http://cgi.ebay.com/HTC-TyTN-II-P45...AU_MobilePhoneAccessories?hash=item2a05bd88c4
It definitely comes form that ...but the repair cost is more than the replacement cost..so why bother with repairing it?
Hey, I'm having the same problem, my phone just out of the blue after a year of use says no sim card. My card is fine in other phones, and no cards work in my phone. I tried the pressure thing and cleaning the pins, but no good. My next option will be a hard reset/ wipe the phone and see if that clears the problem. I'm not optimistic after reading the thread. Did any one have luck with one of those Kaiser Flex Sim Card Slot Repair Parts that loller90278 mentioned? If so, I would rather spend $16 to fix a phone that has worked well up till now, rather than spend $100 on an unknown used phone. Still I don't want to bother if it's not going to work.
Thanks
well well...i'm going to have to join this "club" of affected kaiser users
my kaiser just started misbehaving last night. i bought it brand new exactly 1 year and 11 months ago
i took good care of it, barely ever tilted the screen during my almost 2 years of use. the current behavior is that when the keyboard is closed, the sim is hardly ever detected (1 out of 10 times perhaps). when the keyboard is opened, the sim is fairly regularly detected (9 out of 10 times perhaps).
i am not going to bother with investigating the possibility of a software problem because of my observations. given all the threads i've read about this issue, i am convinced my sim flex cable is either loose and/or broken.
anyway, it seems the kaiser's flex cable is just not built to last much longer than 2 years. if i can have it repaired for up to around $50, i'll go for it...if not, HD2 here i come!
ASCIIker said:
well well...i'm going to have to join this "club" of affected kaiser users
my kaiser just started misbehaving last night. i bought it brand new exactly 1 year and 11 months ago
i took good care of it, barely ever tilted the screen during my almost 2 years of use. the current behavior is that when the keyboard is closed, the sim is hardly ever detected (1 out of 10 times perhaps). when the keyboard is opened, the sim is fairly regularly detected (9 out of 10 times perhaps).
i am not going to bother with investigating the possibility of a software problem because of my observations. given all the threads i've read about this issue, i am convinced my sim flex cable is either loose and/or broken.
anyway, it seems the kaiser's flex cable is just not built to last much longer than 2 years. if i can have it repaired for up to around $50, i'll go for it...if not, HD2 here i come!
Click to expand...
Click to collapse
just wanted to follow up on my own post above.
i just got my kaiser back. its been repaired
the dude cannibalized the main flex cable and sim assembly from a tilt and transplanted it into my tytn2. BUT! there has been an interesting side effect...because the tilt does not have a front cam, my guess is that its flex cable is unable to carry the signal of the front cam in the tytn2. so now my front cam is no longer detected. the camera app shows no icon to switch to another camera. the icon is blank!
i figured i could either have a kaiser with sim problems or a working kaiser with no front cam. i chose to keep the flex cable from the tilt because there is no 3G in my region and i hardly ever used the front camera otherwise.
long story short, my kaiser is back in business!
Similar problem !!!
Hello mate, .,. the problem in you case is the connecting ribbon between the keyboard that holds the sim card beneath it and the screen. I recommend u to replace the ribbon that connects. Its around 40 USD and that should do the trick.
Cheers !!!!!
I have been trying to repair this phone, but the usual faults have not turned out to be the problem. This is the background on the repair efforts:
In my research I found 3 main causes for a dead touch screen.
1) Corruption of system software.
2) Failure of digitizer cable (hinge FPC)
3) Failure of digitizer screen (touch panel)
To check for #1, I flashed the firmware again (after a wipe). I downgraded to Android 1.5 because I wanted to root the phone and install CyanogenMod Android 2.2 Froyo.
This was a big mistake because I learned that when you don't have a working touch screen, you cannot get past the "Touch the Android to Start" screen.
So on to step 2 - replace cable (hinge FPC). I have a G1 parts phone that was lightly used in good condition before it was damaged. There was no damage to the sliding section, so I expected the hinge FPC to be in good condition.
So I installed the hinge assembly with its hinge FPC from the parts phone, but this did not work either.
So next I installed a new touch panel (digitizer screen), but that did not fix the problem either.
I had a chance to borrow a working G1 motherboard, and I was surprised to see that the phone was working with the borrowed motherboard.
So my question is whether my problem motherboard can be recovered with a software solution, or if these symptoms indicate a hardware failure.
I thought that a wipe followed by firmware flash would eliminate all soft system errors, but I am not sure if the wipe and flash really erase absolutely everything, or if there is something else I need to do to get it working again.
Thanks.
more than likly it was the point in the motherboard where the flex cable connects. try using some electronic parts cleaner.
i have ran into this a few times and simply replacing the motherboard has only helped a twice, when i cleaned it up it worked.
That sounds reasonable. I still have some Tweek. I'll give that a try. It worked with the same kinds of problems on computer sockets.
Okay. You are on the right track. When I went back to the phone, I actually got two taps out of the screen, which it hasn't done in a long, long time. (I was running keyboard only for a long time before I could take it down to fix it.) I attribute that to just disturbing the contacts with so many assembly/disassembly efforts.
After I applied Tweek to the joints, it ran well.... for about an hour. Trying again was no luck, so I don't think I'm going to mess with the contacts anymore. By the time you figure how infrequently motherboards come up for sale and the cost, I think I'd do just as well with a trade in on a flat-rate repair.
But at least now we know for the record that there is another cause of dead touch screens.
well i have about 13 motherboards, if your interested let me know
Thanks. What has been your experience with changing motherboards?
The reason I ask is because the service manual wants the phone to be tuned again after a motherboard swap. I see a lot of people changing motherboards, and I can't believe that is much of a problem when you don't see anyone complaining about the phone not working well afterwards.
A spare motherboard might be a good idea for a diagnostic tool. It would have saved me a lot of work changing the touch panel and cables if I would have had a motherboard to try first.
I thought I had a good spare in a damaged phone, but when I took it out the other day to test this phone, I found out it had physical damage too. The SIM holder and RF shielding were dented, but the killer was that the daughterboard cable connector was bent.
I suppose back when the phones were $900 you might try to fix something like that, but it's hard enough to do a connector swap on a computer motherboard. I can't imagine that even the factory has the equipment to properly swap the connector even if you can get the part.
How much do you want for a motherboard? On that famous auction site I've seen them go for around $10 to $30. I could kick myself for not buying the last one I saw at $7 because I thought I had a spare.
I've recently replaced the bezel on my phone and in the process broke the ribbon between the two hardware buttons. I ordered a new one and swapped them over with what I thought was no problem. The keypad note works but now the microphone has stopped working entirely. Could this be a software issue (I do doubt this) as I'm on a stable version of CM10? All the connections are linked up and everything looks fine. This one has me completely baffled
open it up again and check the antenna cable again. Maybe it isn't inserted correctly?
That's a good point. I accidentally crushed the antenna cable but wasn't aware that it was relevant when considering the microphone. The rest of the phone works fine including the mobile signal. May have to link up my old mic just to check this
Aargh! It turns out that the old mic is still working so the new one appears to be the issue. Hmmm, wonder what gets a better resale value a phone with no working buttons or one with no working mic *sigh*
well I changed once front bezel from SGS1, too. Still have the old one. Maybe just buy a new parts? I think those don't cost a lot. Whole front bezel cost about ~100e.
I think after this poor attempt to repair the phone I'm gonna put the device up for sale
Hi,
I really need your help as I have no idea what to do.
After 1 month of using MI5 Pro Ceramic black I have broke my phone,First the touch worked and there was only vertical lines on the lcd in the spot of the shatter so I could operate but due to my stupidity and of force touching the broken glass these vertical lines started to cover all the screen (Everything worked well on the phone..Sound,Camera and etc..)
So I ordered from Aliexpress LCD + Touch screen for about 70$ (Included DHL Express shipment)
When I got the screen I started to disassamble the phone.. Got everything out,Took out the broken screen and pasted the new screen on the frame (Must say all these aliexpress screens are really bad,0% protection on the screen,Not sure about the LCD quality yet but glass is horrible..Started to scratch even before I used it)
Anyways to our point..
Started to assamble back everything.. Powered on the phone and Yay! Phone is working but...
No Sound,Firstly I checked settings and everything..Ran CIT test and everything that belongs to audio giving force close..
Calibrate Speaker PA test results : State-Get impedance failed!,Speaker Vendor-None
Vibration- FAIL no short and no long
Main mic speaker Feedback,Simulation call test,Front mic speaker feedback test,Top mic speaker feedback test,
everything when I enter it giving FC with that details :
"IlegalStateException:Unable to retrieve AudioRecord pointer for SetParameters() blablala...
Headphone mic feedback test (Called on an uninitialized AudioRecord)
So in short..
No Speaker,No Mic,No headphone Mic..
Now my question is what I need to do from now.. Its not firmware/software problem for sure as before I disassambled the phone everything worked well..
My first guess was the problem is on the Sub PCB but then I asked my self..If the USB-C is working and WiFI antenna giving full signal it means the Sub PCB works so what the hell is the problem? I really hope its not something in the PCB it self as it means throw everything to garbage.. ;<
Hope to hear suggests..
I thought to order the MI5 32GB Black version take out the Main PCB put the Pro Main PCB and put also the ceramic back cover but that I would do only if I know that the problem is from the sub PCB but if Headphone mic doesnt work (Which the Main PCB take care of) then its probably in the Main PCB??
Please help!
you didnt damage the pins on the press connector? is the press connector on the ribbon cable flush / fully inserted ? Are you sure you didnt kink the ribbon cable?
I haven't pulled a mi5 apart, but can only assume its like every other phone i have.
leighaus said:
you didnt damage the pins on the press connector? is the press connector on the ribbon cable flush / fully inserted ? Are you sure you didnt kink the ribbon cable?
I haven't pulled a mi5 apart, but can only assume its like every other phone i have.
Click to expand...
Click to collapse
The problem is that far as I understood of how the mi5 built and from how I saw it looks like..The Speaker located in the Sub PCB cover,Vibrate connected to subPCB,And all the SubPCB connected with the cable to the main PCB and I checked it connected good and no any damaged pins from what I was able to see..If there was damaged pins then the phone wont get charged as the USB-C wont be connected as it located in the SubPCB however it does work.. So I really have no idea what cause it..
Also the Headphone mic doesnt work in the tests..Anything related to Audio giving that FC with "AudioRecord" error..
I really must to know what causing it so I will know what to do ;<
Little update,
Just connected a bluetooth speaker,No any sound nothing..
Hi everyone! My MI5 has the same problems, no sound, mic, vibration, led buttons light, plugin earphones without notification's icon, can not play music, video offline and online video (Youtube, Facebook, live stream ..). It was happened when i replaced brooken screen. The first time when I turn on, evetything ok, I can play music through speaker, but now everything has gone..! Plz tell me how to slove this problem! Sorry for my poor E!
Hi, I ended up on buying the phone again... It's impossible to fix that problem as probably you did what I did and didn't place the motherboard correctly so a little bent probably happened and that cause to the problem.
edoroom said:
Hi, I ended up on buying the phone again... It's impossible to fix that problem as probably you did what I did and didn't place the motherboard correctly so a little bent probably happened and that cause to the problem.
Click to expand...
Click to collapse
Hi there! Care to elaborate a little more? I have also the same problem. I was replacing the rear camera module while the module I had received was broken to begin with. I hadn't really figured this out initially and I tried several times to attach it and test it, perhaps move the flex and retest, and at some I remember I found out the vibration was not there, but didn't pay attention to it as everything was open, until I found out the camera module was faulty in the end, and subsequently discovered also the whole issue with sound/vibration/key backlight etc. Instead of buying a new device, I was thinking to try and fix it, but still I'm a bit unsure about what the problem really was. From what I could figure, I didn't do anything different this particular time the audio/vibration didn't work, with respect to the previous times I attached and detached the motherboard. But is it definitely the board itself and not its flex connecting it to the sub-pcb? Could it be the sub-pcb itself or even both this and the board? In case I buy a new board (perhaps together with a sub-pcb just in case) to replace it which part should I watch out for, not to damage it again. Sorry for the many questions but you seem to be the only source of info for this specific problem.
deusxx said:
Hi there! Care to elaborate a little more? I have also the same problem. I was replacing the rear camera module while the module I had received was broken to begin with. I hadn't really figured this out initially and I tried several times to attach it and test it, perhaps move the flex and retest, and at some I remember I found out the vibration was not there, but didn't pay attention to it as everything was open, until I found out the camera module was faulty in the end, and subsequently discovered also the whole issue with sound/vibration/key backlight etc. Instead of buying a new device, I was thinking to try and fix it, but still I'm a bit unsure about what the problem really was. From what I could figure, I didn't do anything different this particular time the audio/vibration didn't work, with respect to the previous times I attached and detached the motherboard. But is it definitely the board itself and not its flex connecting it to the sub-pcb? Could it be the sub-pcb itself or even both this and the board? In case I buy a new board (perhaps together with a sub-pcb just in case) to replace it which part should I watch out for, not to damage it again. Sorry for the many questions but you seem to be the only source of info for this specific problem.
Click to expand...
Click to collapse
Hi sorry for late answer,I barley visit xda these times..
After I bought the MI5 again this time in the 64gb version I tested the old 128gb motherboard (The main one) and still same problem with Vibration/Sound (While all sensors work camera too)
Which means its not the sub-pcb problem,Its the main motherboard for sure,Now what cause it?
In my opinion when I pulled of the motherboard to put it on the new screen I insert it in a bad way which made it bent a little and probably the place I bent is where the audio and all the stuff goes on..
I'm pretty sure we cant really do something about that problem as problem related to motherboard it self are usually not fixable,But if you find something I will glad to get a feedback to test on my own bad motherboard so maybe I can back to the 128gb version ;| but I doubt it..
edoroom said:
Hi sorry for late answer,I barley visit xda these times..
After I bought the MI5 again this time in the 64gb version I tested the old 128gb motherboard (The main one) and still same problem with Vibration/Sound (While all sensors work camera too)
Which means its not the sub-pcb problem,Its the main motherboard for sure,Now what cause it?
In my opinion when I pulled of the motherboard to put it on the new screen I insert it in a bad way which made it bent a little and probably the place I bent is where the audio and all the stuff goes on..
I'm pretty sure we cant really do something about that problem as problem related to motherboard it self are usually not fixable,But if you find something I will glad to get a feedback to test on my own bad motherboard so maybe I can back to the 128gb version ;| but I doubt it..
Click to expand...
Click to collapse
Many thanks for the response! It sheds a little light indeed. I also ordered another phone to replace it as the cost of the motherboard seems to be equal approximately close to a new device. I'm with you, in the same view, I also once placed the motherboard quickly in the chassis without the screw that holds it together, in one of the 50 or so attempts to try and make the camera sensor I was replacing, visible to the OS, and this looseness was the unfortunate one perhaps (?). I too don't expect the sound to work again. I just wanted to double check the issue was not with the sub-pcb, which I did thanks to you. For sure I have no hopes for the mainboard to work again, but still, what keeps me from being certain it is actually the sound card that is the problem, is a very similar case I saw In a foreign forum, and also clues from my device which support the argument that the mainboard might have entered in a kind of diagnostic boot state due to a hardware fault that was apparent, where either some components are not initialized during boot, or their HW resources are taken over from the diag. ports and irqs that are enabled, in which case the issue can perhaps be fixed. For sure whenever I find a good deal on a new motherboard I will replace it, to keep it as a secondary phone, as I liked it quite a bit, but It would be interesting to see if this hypothesis holds or not. Anyway thanks again for the response!
Hi,
I've bought used mi5 with broken screen. After LCD replacement I've found that that phone has problem with sound. Exactly the same as in this thread - no sound, mic, vibration, led buttons light, plugin earphones without notification's icon, can't play music, video offline and online video (Youtube).
Someone already did LCD replacement on this phone and probably done something.
But what I discovered on this phone that problem start when battery charge aprox more then 60%.
I did flash one year old ROM via fastboot ( just to verify if it not the ROM problem) and after that everything was fine ( battery level 50%).
I did hardware test - passed 100% fine.
But when I did charge till 100% the problem come back.
That's really interesting finding... Can you tell me the same steps you did like which rom you flashed and all of that? I will check it with my dead phone maybe if I will have the same thing like you we can point on something...
mi5 lcd replaced touch not working
I bought a mi5 mobile in singapore. My display was damaged. I changed many display in india (checked in many shop). only work display (lcd). Touch not respose. please some one give solution. thank you
have same problem with op
my phone get damaged by water so im rush turn it off and open everything then go to dry it... and problem with speaker etc doesnt work just like op please help i really doesnt have money to buy new phone this month
Exactly same problem with me, just replaced the rear camera and the problem occurs
No sound, no vibration, nav led not working at all, playing video not working
Even playing sound via bluetooth speaker not working too
I believe there is something wrong with the mainboard
can anyone point out which part of the mainboard responsible for the lower board?
The lower board works well though, I tested it using other mainboard
codearm2 said:
Exactly same problem with me, just replaced the rear camera and the problem occurs
No sound, no vibration, nav led not working at all, playing video not working
Even playing sound via bluetooth speaker not working too
I believe there is something wrong with the mainboard
can anyone point out which part of the mainboard responsible for the lower board?
The lower board works well though, I tested it using other mainboard
Click to expand...
Click to collapse
For me the problem was that after the screen replacement (It may also apply to you after you replaced the rear camera..)
When I put back he main motherboard it wasnt sat properly,I put it beneath a small plastic holder and when I closed everything and screw and all..Problem appeared and when I rechecked motherboard I found out it got bent in the right down side and that's probably what killed all the sensors,sound and everything..
Of course that what happend to me..There is plenty of other reasons that may cause to what you experience..
edoroom said:
For me the problem was that after the screen replacement (It may also apply to you after you replaced the rear camera..)
When I put back he main motherboard it wasnt sat properly,I put it beneath a small plastic holder and when I closed everything and screw and all..Problem appeared and when I rechecked motherboard I found out it got bent in the right down side and that's probably what killed all the sensors,sound and everything..
Of course that what happend to me..There is plenty of other reasons that may cause to what you experience..
Click to expand...
Click to collapse
I believe the chip or something similar, that control the sensor, led, vibration etc, was broken because we put it the wrong way
now we need to find which chip it is and replace it
which part of the right down? near the signal cable?
codearm2 said:
I believe the chip or something similar, that control the sensor, led, vibration etc, was broken because we put it the wrong way
now we need to find which chip it is and replace it
which part of the right down? near the signal cable?
Click to expand...
Click to collapse
If you just checked and saw you put it wrong as I did,On the little plastic which made a little bent then I guess you lost..I would just buy new motherboard on aliexpress or just give up and buy a new phone..
As you cant really know (I mean from our side..) if its a chip related there or if its the bent it self which made problem on the connection on the board it self..
And yes I was speaking about the right side near the signal cable where you need to install the motherboard from that side where there is a little plastic like holding the motherboard..When I did the reinstall by not checking I put the motherboard on that plastic and after I closed everything and all screws got back I discovered that problem..
edoroom said:
If you just checked and saw you put it wrong as I did,On the little plastic which made a little bent then I guess you lost..I would just buy new motherboard on aliexpress or just give up and buy a new phone..
As you cant really know (I mean from our side..) if its a chip related there or if its the bent it self which made problem on the connection on the board it self..
And yes I was speaking about the right side near the signal cable where you need to install the motherboard from that side where there is a little plastic like holding the motherboard..When I did the reinstall by not checking I put the motherboard on that plastic and after I closed everything and all screws got back I discovered that problem..
Click to expand...
Click to collapse
yeah, it means it's the same mistake as mine, that little metal thing that hold the motherboard, I forgot to eject the sim card tray and when I pull my main board it was stuck, got a little bent from there
Just wonder if anyone have the schematic for mi5 mainboard, since I'm curious and want to find a way to repair it
Not because I'm in despair of needing a phone, this MI5 is my secondary phone
Just because of the curiousity, that's all
edi--
found the schematic here
https://data.dendik.id/Data/Schematic/Xiaomi/Mi5_SM.rar
now on the journey to repair this stupid mistake, lol
any help from someone who are an expert in this thing will be really appreaciated
codearm2 said:
yeah, it means it's the same mistake as mine, that little metal thing that hold the motherboard, I forgot to eject the sim card tray and when I pull my main board it was stuck, got a little bent from there
Just wonder if anyone have the schematic for mi5 mainboard, since I'm curious and want to find a way to repair it
Not because I'm in despair of needing a phone, this MI5 is my secondary phone
Just because of the curiousity, that's all
edi--
found the schematic here
https://data.dendik.id/Data/Schematic/Xiaomi/Mi5_SM.rar
now on the journey to repair this stupid mistake, lol
any help from someone who are an expert in this thing will be really appreaciated
Click to expand...
Click to collapse
ok bruh im already do some fking around and do ic audio replacement but no hope its still broke even my repair guy who are ex xiaomi worker are give up the problem is looks like from cpu its self but there was something interesting if u try download device info hw app in google play there was warning that the device cant read sys or something cuz it was blocked and when u look at audio chipset its was gone
feel2death said:
ok bruh im already do some fking around and do ic audio replacement but no hope its still broke even my repair guy who are ex xiaomi worker are give up the problem is looks like from cpu its self but there was something interesting if u try download device info hw app in google play there was warning that the device cant read sys or something cuz it was blocked and when u look at audio chipset its was gone
Click to expand...
Click to collapse
Yeah, tried it before, and the audio chip is gone
Perhaps something wrong with the audio chip, will try to replace the IC tomorrow
Hey guys,
So I've personally owned this device before and sold it, however, luckily I was looking about on Craigslist and managed to run into a post where this lady was selling her Midnight 128gb OP3T for $10 due to the wifi not working. The phone is literally spanking new and the only thing I can think of is water damage. She said the wifi suddenly stopped working and spoke with OnePlus Tech support and wasn't going to pay $275 to fix it so she just wanted it gone. So I figured whats there to lose, right? I went home performed a factory reset on the phone and the wifi actually was working. Then I realized it's intermittently working. I found that out because after sometime it suddenly disables itself and I have to sleep the device for like two minutes and it'll kick back on. The proximity sensor is also dead too. I did the *#808# to test the sensor and nothing is generated. These are the only real issues this phone has. The loud speaker also sounds a bit off... I'm sure I could easily replace that too.. It could just be me. I've posted the snapshot of the proximity sensor test. The wifi was currently working when I took that snapshot and like I said it's a hit or miss.
I haven't gotten into the device just yet, however, I'm planning to check the water damage sticker once I do as that is my suspicion. I'm waiting on my tool set I ordered on Amazon at the moment. My question is, do you think replacing the wifi antenna cable will fix the wifi connectivity issue? The phone is currently on 8.0 Oreo and I haven't tried performing a complete reset/restore so I'm not sure that could be a fix. Also the phone doesn't get too hot and usually with water damaged devices the phone typically overheats pretty fast due to corrosion. I guess I'll find out after I open the device, but for now do you guys have any other suggestions? I've heard of the whole IPv6 intermittent wifi issues and can assure I have IPv6 disabled.
Thanks for taking the time to read my question!
The WIFI thing isn't something I think you can just replace, I think you would just need to replace the board right?
Yes, you would need to replace the mainboard of the phone. However 10$ is quite cheap for a spare screen and midnight black metal casing. Just find a cheap 3T with broken screen and switch mainboard with that one and you have a working phone. [emoji16]
Before doing that, check the phone's board and look for corrosion. If you find any, try cleaning it up gently, with some alcohol and if you manage to get it all cleaned up, try testing it again to see if it solves the problem.
If you get the schematic for this device and have a boardview program you could find the wifi circuitry..... it is more than likely some short to ground due to the fact that you are feeling heat.... due to liquid damage or not. Sometimes changing a small component can fix the issue but you need a microscope, heat gun, solder pencil, etc......