[Q] ruu not installing in htc one m7 at&t - One (M7) Q&A, Help & Troubleshooting

Hy
Friendz im in little problem plz help me....
I have htc one m7 at&t which was one htc logo stopped, it is on bootloader unlocked and it was on twrp recovery, when i checked recovey mood there was no operating system was installed i checked cid and i found cws__001 which At&t carrier id i downloaded ruu but it was not installed given me 155 Error 2nd ruu i dowloaded of at&t it also given me 155 error after that i tried to install custom rom but recovery is not mouting in with pc then i changed recovery mode into cwm still same problem itwas not mounting with pc, last time i downloaded 3rd ruu which was also at&t ruu(RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R10_Radio_4T.24.3218.09_10.26.1718.01L_release_356565_signed_2) when i was tried to install it was taken too much time and the charge of my phne was finished and now phone is not charging.
plz frndz help me

naush88 said:
Hy
Friendz im in little problem plz help me....
I have htc one m7 at&t which was one htc logo stopped, it is on bootloader unlocked and it was on twrp recovery, when i checked recovey mood there was no operating system was installed i checked cid and i found cws__001 which At&t carrier id i downloaded ruu but it was not installed given me 155 Error 2nd ruu i dowloaded of at&t it also given me 155 error after that i tried to install custom rom but recovery is not mouting in with pc then i changed recovery mode into cwm still same problem itwas not mounting with pc, last time i downloaded 3rd ruu which was also at&t ruu(RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R10_Radio_4T.24.3218.09_10.26.1718.01L_release_356565_signed_2) when i was tried to install it was taken too much time and the charge of my phne was finished and now phone is not charging.
plz frndz help me
Click to expand...
Click to collapse
flash this firmware then the RUU
ATT_OTA.4.18.502.7.firmware.zip

clsA said:
flash this firmware then the RUU
thnx bro but how do i flash this zip? phone is not mounting with pc..
Click to expand...
Click to collapse

naush88 said:
clsA said:
flash this firmware then the RUU
thnx bro but how do i flash this zip? phone is not mounting with pc..
Click to expand...
Click to collapse
it's firmware you flash it with fastboot
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
then flash the 4.x.502.x RUU
Click to expand...
Click to collapse

clsA said:
naush88 said:
it's firmware you flash it with fastboot
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
then flash the 4.x.502.x RUU
Click to expand...
Click to collapse
bro zip is,nt flashed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse

naush88 said:
clsA said:
bro zip is,nt flashed.
Click to expand...
Click to collapse
Android_info.txt Fail ...your CID or MID do not match AT&T
Click to expand...
Click to collapse

clsA said:
naush88 said:
Android_info.txt Fail ...your CID or MID do not match AT&T
Click to expand...
Click to collapse
this is the cid bro, now what should i do?
Click to expand...
Click to collapse

naush88 said:
clsA said:
this is the cid bro, now what should i do?
Click to expand...
Click to collapse
Then your MID must be different it has to be modelid: PN0712000 for AT&T
or you can change the android_info.txt to match yours (both firmware and Decrypted RUU)
Click to expand...
Click to collapse

My phone won't stay in ruu mode before I can get the next command in its goes back to the bootloader screen help please

bro after some variations finally i intalled cutom c11, now i trying to S off but the process are not working i tried to reinstall supersu.apk when installation completed supersu opened but given the error which is "there is no SU binary installed and SuperSU cannot install it"
please bro help me

naush88 said:
bro after some variations finally i intalled cutom c11, now i trying to S off but the process are not working i tried to reinstall supersu.apk when installation completed supersu opened but given the error which is "there is no SU binary installed and SuperSU cannot install it"
please bro help me
Click to expand...
Click to collapse
Flash the SuperSU in TWRP
http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip

I'm having the same issue with this fix my problem

clsA said:
Flash the SuperSU in TWRP
http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip
Click to expand...
Click to collapse
thnx bro.. i did s off and changed cid but now im facing 3 more problems 1 is wifi is not working of c11-20140106-nightly-m7att
2 its not updating given error in recovery 3rd is im trying to change cyanogemod of normal m7 version but when i trying to install zip in recovery in its giving same error when i trying to update c11 att version.
sorry for weak english

bro im again i tried install ru but same problem giving me 155 error. i changed cid and mid id into international version.
any solution?

naush88 said:
bro im again i tried install ru but same problem giving me 155 error. i changed cid and mid id into international version.
any solution?
Click to expand...
Click to collapse
Why did you change to international ?
Their are plenty of AT&T Ruu
Change back to AT&T CID and MID

clsA said:
Why did you change to international ?
Their are plenty of AT&T Ruu
Change back to AT&T CID and MID
Click to expand...
Click to collapse
but no one is working bro, y?

naush88 said:
but no one is working bro, y?
Click to expand...
Click to collapse
Your MID is wrong should be PN0712000 and CID - CWS__001

Related

[Q] how to Downgrade HBOOT ?

-Revulutionary-
Vivo put ship S-OFF RL
HBOOT-6.13.1002
Radio-3805.06.03.03_M
eMMC-boot
i tried yesterday to make my phone S-on , i used
RUU_Vivo_Gingerbread_S_HTC_WWE_2.30.405.1_Radio_20.2808.30.085AU_3805.06.03.03_M_release_199308_signed.exe .
but now here it says s-off but i cant use recovery, could someone help me out how to fix again s-off so i could use recovery again ?
so now do i need to downgrade hboot to 1.13 or 1.09 so i can use again revulutionary to gain s-off ? (if yes how to do that ?)
help ?
So it is s off, but you cannot use recovery??
Can you boot into android and use the phone?
markj338 said:
So it is s off, but you cannot use recovery??
Can you boot into android and use the phone?
Click to expand...
Click to collapse
yeah its s-off but i cant use recovery .
i can use the phone but if i try to install the OTA UPDATE than it wont load only htc logo but i fixed that.
now i think i need to downgrade the hboot to 1.13 or 1.09 so i can s-off 100% again with Revulutionary
blerim1234 said:
yeah its s-off but i cant use recovery .
i can use the phone but if i try to install the OTA UPDATE than it wont load only htc logo but i fixed that.
now i think i need to downgrade the hboot to 1.13 or 1.09 so i can s-off 100% again with Revulutionary
Click to expand...
Click to collapse
I got s-on once just by flashing a s-on hboot via fastboot. Not sure if you can overwrite a 6.13 hboot with a 1.13 but it could work
yesterday i tried to make s-on with this
RUU_Vivo_Gingerbread_S_HTC_WWE_2.30.405.1_Radio_20 .2808.30.085AU_3805.06.03.03_M_release_199308_sign ed.exe
it was installed good i could install ota updates from my phone. but when i did install the ota than my phone didnt work only HTC logo. but i used FASTBOOT USB so i could install again RUU_Vivo_Gingerbread_S_HTC . And the phone is still s-off .
but when i go to Rom manager it says that i dont have permission cause i dont have a rooted phone ?
Random thought: can you root with gingerbreak?
markj338 said:
Random thought: can you root with gingerbreak?
Click to expand...
Click to collapse
im trying it now , but 5 minutes only loading nothing .
blerim1234 said:
-Revulutionary-
Vivo put ship S-OFF RL
HBOOT-6.13.1002
Radio-3805.06.03.03_M
eMMC-boot
i tried yesterday to make my phone S-on , i used
RUU_Vivo_Gingerbread_S_HTC_WWE_2.30.405.1_Radio_20.2808.30.085AU_3805.06.03.03_M_release_199308_signed.exe .
but now here it says s-off but i cant use recovery, could someone help me out how to fix again s-off so i could use recovery again ?
so now do i need to downgrade hboot to 1.13 or 1.09 so i can use again revulutionary to gain s-off ? (if yes how to do that ?)
Click to expand...
Click to collapse
Did you check this FAQ sticky?
http://forum.xda-developers.com/showthread.php?t=1435136
It describes why running an RUU with Revolutionary S-OFF did not work. You need to find the thread that discusses returning to S-ON from Revolutionary S-OFF.
http://forum.xda-developers.com/showthread.php?t=1359555&highlight=revolutionary+s-on
tpbklake said:
Did you check this FAQ sticky?
http://forum.xda-developers.com/showthread.php?t=1435136
It describes why running an RUU with Revolutionary S-OFF did not work. You need to find the thread that discusses returning to S-ON from Revolutionary S-OFF.
http://forum.xda-developers.com/showthread.php?t=1359555&highlight=revolutionary+s-on
Click to expand...
Click to collapse
i want now to keep s-off i have some backups but i cant restore. when i go to rom manager it says that my phone its not rooted. ??
can u tell me how to restore the backup so i can make my phone like it was ?
blerim1234 said:
i want now to keep s-off i have some backups but i cant restore. when i go to rom manager it says that my phone its not rooted. ??
can u tell me how to restore the backup so i can make my phone like it was ?
Click to expand...
Click to collapse
Don't use ROM Manager. Boot into HBOOT and then select RECOVERY from the menu. Or with the phone booted, connect the phone via USB, open up a command window and then type:
adb reboot recovery
adb server is out of date. killing .......
*daemon started successfully *
error : device not found
im doing something wrong but dont know what.
thanks for your help
this happend after i did adb reboot recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
try reverting to Stock.)
hey wanna try this thing, may be it'll work.)
or wanna try this thing..!?)
blerim1234 said:
this happend after i did adb reboot recovery
Click to expand...
Click to collapse
OK, so when you attempted to run the RUU, it overwrote ClockworkMod recovery with the stock recovery.
In the FAQ thread I posted, you need to reinstall ClockworkMod recovery before you will be able to restore your backup.
The easiest way to do that is to boot into FASTBOOT USB mode and then enter:
fastboot flash recovery [path to recovery image file]
tpbklake said:
OK, so when you attempted to run the RUU, it overwrote ClockworkMod recovery with the stock recovery.
In the FAQ thread I posted, you need to reinstall ClockworkMod recovery before you will be able to restore your backup.
The easiest way to do that is to boot into FASTBOOT USB mode and then enter:
fastboot flash recovery [path to recovery image file]
Click to expand...
Click to collapse
Where can i find the recovery image bro and where do i need to put it
And thnx very much for your help
blerim1234 said:
Where can i find the recovery image bro and where do i need to put it
And thnx very much for your help
Click to expand...
Click to collapse
http://download.clockworkmod.com/recoveries/recovery-clockwork-5.0.2.0-vivo.img
Download and put the file in the directory where you have setup adb.exe and fastboot.exe.
tpbklake said:
http://download.clockworkmod.com/recoveries/recovery-clockwork-5.0.2.0-vivo.img
Download and put the file in the directory where you have setup adb.exe and fastboot.exe.
Click to expand...
Click to collapse
i have put adb.exe and fastboot.exe in C:android
so i have putted the file there
when i go to cmd and write
"fastboot flash recovery recovery-clockwork-5.0.2.0-vivo.img"
it says error cannot load "recovery-clockwork-5.0.2.0-vivo.img"
blerim1234 said:
i have put adb.exe and fastboot.exe in C:android
so i have putted the file there
when i go to cmd and write
"fastboot flash recovery recovery-clockwork-5.0.2.0-vivo.img"
it says error cannot load "recovery-clockwork-5.0.2.0-vivo.img"
Click to expand...
Click to collapse
Try renaming the file to
recovery.img and then type
fastboot flash recovery recovery.img
You do have the phone in FASTBOOT USB mode, right?
its on fastboot usb but still not working
it says error cannot load "recovery.img"
dont know why

[Q] S-OFF & Locked ?

Hi Everyone,
I got my second One today, first one had microphone issues.
I asked my cousin from UK to send me a new one, I got it today and I want to use a custom rom.
But when I opened the bootloader I saw something strange, it was s-off.
My build number is 1.29.206.11 (O2 UK).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I want to install this firmware 1.29.401.12 and a custom recovery after it.
Can I install this firmware directly?
Do I have to unlock my bootloader from htcdev to flash a custom recovery? (Its written locked)
It would be great if someone can tell me what should I do.
P.S.
-fastboot oem unlock doesnt work
-fastboot flash recovery recovery.img doesnt work
Thanks
You have to register with htcdev and unlock your phone that way when you get the unlock_code.bin and AFAIK there is no way to unlock the bootloader without going through htcdev.
Until you do this you won't be able to flash any custom recoveries etc.
mehmetolgungun said:
Hi Everyone,
I got my second One today, first one had microphone issues.
I asked my cousin from UK to send me a new one, I got it today and I want to use a custom rom.
But when I opened the bootloader I saw something strange, it was s-off.
My build number is 1.29.206.11 (O2 UK).
I want to install this firmware 1.29.401.12 and a custom recovery after it.
Can I install this firmware directly?
Do I have to unlock my bootloader from htcdev to flash a custom recovery? (Its written locked)
It would be great if someone can tell me what should I do.
P.S.
-fastboot oem unlock doesnt work
-fastboot flash recovery recovery.img doesnt work
Thanks
Click to expand...
Click to collapse
You have to unlock with htcdev site.
After you can do all what you want
uhhh...he can flash the firmware directly through
Code:
fastboot oem rebootRUU
fastboot flash zip FIRMWARE.zip
fastboot reboot
Indirect said:
uhhh...he can flash the firmware directly through
Code:
fastboot oem rebootRUU
fastboot flash zip FIRMWARE.zip
fastboot reboot
Click to expand...
Click to collapse
Yes, sure
But:
mehmetolgungun said:
I want to install this firmware 1.29.401.12 and a custom recovery after it.
Click to expand...
Click to collapse
For the custom recovery he have to unlock the bootloader
false. He's s-off so he can add the recovery.img to the flashable firmware zip and then he has both.
Yep, just use the fastboot command
fastboot flash recovery recovery.img
where recovery.img is the name of CWM/TWRP. Nice and easy!
EDIT: Re-read the OP, strange that it doesn't work as it should do. What error do you get?
EddyOS said:
Yep, just use the fastboot command
fastboot flash recovery recovery.img
where recovery.img is the name of CWM/TWRP. Nice and easy!
EDIT: Re-read the OP, strange that it doesn't work as it should do. What error do you get?
Click to expand...
Click to collapse
I cant tell the error now, because I already unlocked my bootloader from htcdev.
As the poeople said that I cant do it, I made it from htcdev
I wouldn't have done anything until people had a chance to properly answer you...oh well
EddyOS said:
I wouldn't have done anything until people had a chance to properly answer you...oh well
Click to expand...
Click to collapse
I had a simil case with my evo 3D.
I had it in s-off and locked after the reparation in warranty by htc, i tried to flash a recovery but nothing.
So i unlocked my bootloader with htcdev and all worked fine...
But that defeats the point of S-OFF...with S-OFF you should have free access to everything without having to unlock, unless HTC have changed something in which case S-OFF is useless unless you want to flash an older RUU
You have access if you flash through a zip. That's the only way s-off devices can flash while still locked.
Sent from my hidden jewel
To the OP, you lucky man!!
mehmetolgungun said:
Hi Everyone,
I got my second One today, first one had microphone issues.
I asked my cousin from UK to send me a new one, I got it today and I want to use a custom rom.
But when I opened the bootloader I saw something strange, it was s-off.
My build number is 1.29.206.11 (O2 UK).
I want to install this firmware 1.29.401.12 and a custom recovery after it.
Can I install this firmware directly?
Do I have to unlock my bootloader from htcdev to flash a custom recovery? (Its written locked)
It would be great if someone can tell me what should I do.
P.S.
-fastboot oem unlock doesnt work
-fastboot flash recovery recovery.img doesnt work
Thanks
Click to expand...
Click to collapse
If you are s-off, that's all you need, don't worry about the bootloader being locked, it's immaterial with s-off.

[Q] htc one m7 Gray screen? please help

my htc one m7 is on some type of gray screen while converting this to Google play edition i would like to get this problem solved
i am new to these root type of stuff so any info would help thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the phone breaker said:
my htc one m7 is on some type of gray screen while converting this to Google play edition i would like to get this problem solved
i am new to these root type of stuff so any info would help thanks
View attachment 2699760
Click to expand...
Click to collapse
Were you using the eng hboot to change mid when it occurred?
alray said:
Were you using the eng hboot to change mid when it occurred?
Click to expand...
Click to collapse
yes i was doing what it told me to do
the phone breaker said:
yes i was doing what it told me to do
Click to expand...
Click to collapse
this procedure to change mid is very outdated and there is now much easier and safer way to do it with a tool from custom recovery.
Just to be sure, you were doing this procedure to change mid right?
alray said:
this procedure to change mid is very outdated and there is now much easier and safer way to do it with a tool from custom recovery.
Just to be sure, you were doing this procedure to change mid right?
Click to expand...
Click to collapse
yeah i was using that
alray said:
this procedure to change mid is very outdated and there is now much easier and safer way to do it with a tool from custom recovery.
Just to be sure, you were doing this procedure to change mid right?
Click to expand...
Click to collapse
and also when i try to put an ruu across it says error
the phone breaker said:
and also when i try to put an ruu across it says error
Click to expand...
Click to collapse
what error? Did you sucesfully changed your MID/CID? What OS on your PC?
please post the output of ''fastboot getvar all'' except imei/sn
alray said:
what error? Did you sucesfully changed your MID/CID? What OS on your PC?
please post the output of ''fastboot getvar all'' except imei/sn
Click to expand...
Click to collapse
i dont remember it was a long time a go sorry
the phone breaker said:
i dont remember it was a long time a go sorry
Click to expand...
Click to collapse
so if you can't tell me what is your PC OS and you can't post a fastboot getvar all I can't help you.
alray said:
so if you can't tell me what is your PC OS and you can't post a fastboot getvar all I can't help you.
Click to expand...
Click to collapse
window 7
the phone breaker said:
window 7
Click to expand...
Click to collapse
fastboot getvar all
I can't be more clear, need those info.
alray said:
fastboot getvar all
I can't be more clear, need those info.
Click to expand...
Click to collapse
do i need any files or somthing?
the phone breaker said:
do i need any files or somthing?
Click to expand...
Click to collapse
you should still be able to use fastboot commands from that gray screen. So do that commands:
Code:
fastboot getvar all
copy/paste or post a screenshot except the IMEI and Serial #. See the example below:
The output of ''fastboot getvar all'' is required to determine what are the possiblities to restore your phone. I'm assuming here that you know how to use fastboot because you have used it previously to flash the eng hboot.
alray said:
you should still be able to use fastboot commands from that gray screen. So do that commands:
Code:
fastboot getvar all
copy/paste or post a screenshot except the IMEI and Serial #. See the example below:
The output of ''fastboot getvar all'' is required to determine what are the possiblities to restore your phone. I'm assuming here that you know how to use fastboot because you have used it previously to flash the eng hboot.
Click to expand...
Click to collapse
sorry for late reply
but here
the phone breaker said:
sorry for late reply
but here
Click to expand...
Click to collapse
ok so to return to dev edition:
launch the 4.19.1540.9 ruu.exe
or for google edtition do that command:
Code:
fastboot oem writecid GOOGL001
then launch google edition ruu
alray said:
ok so to return to dev edition:
launch the 4.19.1540.9 ruu.exe
or for google edtition do that command:
Code:
fastboot oem writecid GOOGL001
then launch google edition ruu
Click to expand...
Click to collapse
could you send a link for it as i have deleted all them files
also i have no baseband whats that about??
the phone breaker said:
could you send a link for it as i have deleted all them files
also i have no baseband whats that about??
Click to expand...
Click to collapse
baseband is your radio. It will be flashed back with a ruu.
latest dev edition ruu: http://www.htc1guru.com/2014/03/android-dev-ruu/
latest GPE ruu: http://www.htc1guru.com/dld/ruu-zip-m7_google-edition_4-4_3-58-1700-5-zip/
For the ruu.exe(DEV edition), just lauch the .exe file with phone in bootloader.
For the ruu.zip (GPE)
boot phone in bootloader
make sure the ruu.zip is in the same folder of adb and fastboot
Code:
fastboot oem writecid GOOGL001
fastboot reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip name_of_file.zip [COLOR="Red"]---> will fail first time and ask you to ''flush'' image again immediately
[/COLOR]fastboot flash zip name_of_file.zip [COLOR="red"]so do the command twice. There's no progress bar, this can take up to 20 mins[/COLOR]
fastboot reboot
Just a side note:
If you are going to use the GPE ruu, NEVER turn security back to S-ON and NEVER relock bootloader :angel:
alray said:
baseband is your radio. It will be flashed back with a ruu.
latest dev edition ruu: http://www.htc1guru.com/2014/03/android-dev-ruu/
latest GPE ruu: http://www.htc1guru.com/dld/ruu-zip-m7_google-edition_4-4_3-58-1700-5-zip/
For the ruu.exe(DEV edition), just lauch the .exe file with phone in bootloader.
For the ruu.zip (GPE)
boot phone in bootloader
make sure the ruu.zip is in the same folder of adb and fastboot
Code:
fastboot oem writecid GOOGL001
fastboot reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip name_of_file.zip [COLOR="Red"]---> will fail first time and ask you to ''flush'' image again immediately
[/COLOR]fastboot flash zip name_of_file.zip [COLOR="red"]so do the command twice. There's no progress bar, this can take up to 20 mins[/COLOR]
fastboot reboot
Just a side note:
If you are going to use the GPE ruu, NEVER turn security back to S-ON and NEVER relock bootloader :angel:
Click to expand...
Click to collapse
when i want to flash ruu it is sayin (waiting for device)
the phone breaker said:
when i want to flash ruu it is sayin (waiting for device)
Click to expand...
Click to collapse
try renaming the ruu with a simpler name and avoid spaces in the ruu name. renamed it i.e google.zip
Code:
fastboot oem rebootRUU
fastboot flash zip google.zip
fastboot flash zip google.zip
fastboot reboot
alray said:
try renaming the ruu with a simpler name and avoid spaces in the ruu name. renamed it i.e google.zip
Code:
fastboot oem rebootRUU
fastboot flash zip google.zip
fastboot flash zip google.zip
fastboot reboot
Click to expand...
Click to collapse
the htc is saying the same things when i put the code fastboot oem rebootRUU
Its like my phone turns off instead.

my htc ome m7 (memory problem) help!!!

hello!
i have htce one m7 32 GB, i had it with custom rom (Team Venom), once i had enter to recovery and i did wipe then i reboot it but it stuk on the green htc logo "quietly brilliant" on that case i tryed to install all new rom but the problem is i cant to enter to sd
samhawk said:
hello!
i have htce one m7 32 GB, i had it with custom rom (Team Venom), once i had enter to recovery and i did wipe then i reboot it but it stuk on the green htc logo "quietly brilliant" on that case i tryed to install all new rom but the problem is i cant to enter to sd
Click to expand...
Click to collapse
what do you mean:
i cant to enter to sd
Click to expand...
Click to collapse
?
use adb push or adb sideload from twrp
alray said:
what do you mean: ?
use adb push or adb sideload from twrp
Click to expand...
Click to collapse
thanks
i mean i cant put the firmware on the memory
samhawk said:
thanks
i mean i cant put the firmware on the memory
Click to expand...
Click to collapse
you should be able the use adb commands from recovery to push the rom to your sdcard or use adb sideload method.
Code:
adb push name_of_rom.zip /sdcard/
then in twrp select ''install'' and choose your rom, swipe to install.
or use adb sideload: http://forum.xda-developers.com/showthread.php?t=2318497
btw I suppose you meant ''software (rom)'' not ''firmware''. Firmware is not flashed trough recovery and don't need to be on the sdcard to be flashed. (flashed via fastboot)
alray said:
you should be able the use adb commands from recovery to push the rom to your sdcard or use adb sideload method.
Code:
adb push name_of_rom.zip /sdcard/
then in twrp select ''install'' and choose your rom, swipe to install.
or use adb sideload: http://forum.xda-developers.com/showthread.php?t=2318497
btw I suppose you meant ''software (rom)'' not ''firmware''. Firmware is not flashed trough recovery and don't need to be on the sdcard to be flashed. (flashed via fastboot)
Click to expand...
Click to collapse
thanks
sorry but i did not understand ""adb commands, adb sideload method, twrp"
and other thing, do i have to know my htc one CID and MID number to download specific rom?
samhawk said:
thanks
sorry but i did not understand ""adb commands, adb sideload method, twrp"
Click to expand...
Click to collapse
do you have the android sdk installed on your computer? You will need it, its the base. I supposed you already know about adb/fastboot commands because you said you were running a custom rom which require adb/fastboot to unlock the bootloader and flash a recovery... TWRP is a custom recovery, you said you wiped everything from recovery... which recovery are you using?
---------- Post added at 07:13 PM ---------- Previous post was at 07:10 PM ----------
instruction to sideload or push the rom can be found here: http://forum.xda-developers.com/showthread.php?t=2318497
alray said:
do you have the android sdk installed on your computer? You will need it, its the base. I supposed you already know about adb/fastboot commands because you said you were running a custom rom which require adb/fastboot to unlock the bootloader and flash a recovery... TWRP is a custom recovery, you said you wiped everything from recovery... which recovery are you using?
---------- Post added at 07:13 PM ---------- Previous post was at 07:10 PM ----------
instruction to sideload or push the rom can be found here: http://forum.xda-developers.com/showthread.php?t=2318497
Click to expand...
Click to collapse
thank you and am sorry!
i had that phone like that "with custom rom" now in this state i guess its the same recovery thats you are talking about "TWRP"
is any other way to flash it without using that way "put rom on the phone then install it with recovery" ?
samhawk said:
thank you and am sorry!
i had that phone like that "with custom rom" now in this state i guess its the same recovery thats you are talking about "TWRP"
is any other way to flash it without using that way "put rom on the phone then install it with recovery" ?
Click to expand...
Click to collapse
Flash a RUU
clsA said:
Flash a RUU
Click to expand...
Click to collapse
thanks
can i do that even that my phone has recovery TWRP and stuk on htc logo and other thing, do i have to know my htc one CID and MID number to download specific ruu?
samhawk said:
thanks
can i do that even that my phone has recovery TWRP and stuk on htc logo and other thing, do i have to know my htc one CID and MID number to download specific ruu?
Click to expand...
Click to collapse
yes you have to know what RUU you need
then just lock the bootloader and flash the RUU from windows
clsA said:
yes you have to know what RUU you need
then just lock the bootloader and flash the RUU from windows
Click to expand...
Click to collapse
the phone dosnt turned up it stucks on htc logo also its unloked bootloader and has recovery
the problem begin when i did wipe then when i try to reboot i did not swipe to install superuser, i did dont install, after that it has rebooted and stuck on htc logo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
now how can i know my the RUU that i need and the phone cant turn on?
samhawk said:
the phone dosnt turned up it stucks on htc logo also its unloked bootloader and has recovery
the problem begin when i did wipe then when i try to reboot i did not swipe to install superuser, i did dont install, after that it has rebooted and stuck on htc logo
now how can i know my the RUU that i need and the phone cant turn on?
Click to expand...
Click to collapse
your recovery is very old and their is no RUU for version-main: 4.19.163.5
flash the new one TWRP 2.6.3.3
here > http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then try and push your rom again
clsA said:
your recovery is very old and their is no RUU for version-main: 4.19.163.5
flash the new one TWRP 2.6.3.3
here > http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then try and push your rom again
Click to expand...
Click to collapse
if their is no RUU can i use this http://www.htc1guru.com/dld/guru_reset_m7_2-24-163-2-zip/
samhawk said:
if their is no RUU can i use this http://www.htc1guru.com/dld/guru_reset_m7_2-24-163-2-zip/
Click to expand...
Click to collapse
yes that's the best stock rom for your phone
clsA said:
yes that's the best stock rom for your phone
Click to expand...
Click to collapse
so now should i lock bootloader then "fastboot oem rebootRUU"?
samhawk said:
so now should i lock bootloader then "fastboot oem rebootRUU"?
Click to expand...
Click to collapse
no it's a rom flash it from recovery
clsA said:
no it's a rom flash it from recovery
Click to expand...
Click to collapse
i relocked the botloader!
what should i do now?
samhawk said:
i relocked the botloader!
what should i do now?
Click to expand...
Click to collapse
@alray already explained what to do
http://forum.xda-developers.com/showpost.php?p=52195826&postcount=4
clsA said:
@alray already explained what to do
http://forum.xda-developers.com/showpost.php?p=52195826&postcount=4
Click to expand...
Click to collapse
do i have now to unlock bootloader
unable to mount!!!

Brick - No OS, Recovery and fastboot problems

Hey Guys, I was wondering if any of you could help me with this....
Background - My HTC One was having issues with the touchscreen, and I was going to hand it in to EE to get it repaired tomorrow. But *naturally* I need to restore it to stock settings first...
What did I do?
1) Installed a ZIP file with the stock recovery/ROM via an AROMA installer from TWRP
2) Tried to relock bootloader, succeeded, but somewhere something went wrong and my ROM got corrupted
3) managed to re-install TWRP via fastboot, but I couldn't get system to mount so I couldn't install any ROM at all
4) Used fastboot to try to wipe system and reformat it, didn't work
5) Managed to remove the tampered flag (still S-OFF at this point though) so my plan was to S-ON and then give it to HTC being all "durr it no werk" and get them to sort everything out on it
6) S-ON'd the phone, only to have the tampered flag appear at this point, so I can't hand it back in and protest my innocence anymore
7) Can no longer S-OFF, install any ROM because I get a remote: signature invalid error for any stock ROM or recovery that I try to install despite my CID being HTC__001 which is the same as the stock ROM I'm trying to push via fastboot
8) Can no longer get into TWRP either
Bottom line - phone is S-ON, bootloader is locked (and won't accept my Unlock_code.bin), tampered flag is on, fastboot won't let me install anything because of a file signature error, No operating system, no working recovery.
If you can help me in any way at all, I'd be eternally grateful!
Dropbox link to potato-cam photos
Da Vikster said:
Hey Guys, I was wondering if any of you could help me with this....
Background - My HTC One was having issues with the touchscreen, and I was going to hand it in to EE to get it repaired tomorrow. But *naturally* I need to restore it to stock settings first...
What did I do?
1) Installed a ZIP file with the stock recovery/ROM via an AROMA installer from TWRP
2) Tried to relock bootloader, succeeded, but somewhere something went wrong and my ROM got corrupted
3) managed to re-install TWRP via fastboot, but I couldn't get system to mount so I couldn't install any ROM at all
4) Used fastboot to try to wipe system and reformat it, didn't work
5) Managed to remove the tampered flag (still S-OFF at this point though) so my plan was to S-ON and then give it to HTC being all "durr it no werk" and get them to sort everything out on it
6) S-ON'd the phone, only to have the tampered flag appear at this point, so I can't hand it back in and protest my innocence anymore
7) Can no longer S-OFF, install any ROM because I get a remote: signature invalid error for any stock ROM or recovery that I try to install despite my CID being HTC__001 which is the same as the stock ROM I'm trying to push via fastboot
8) Can no longer get into TWRP either
Bottom line - phone is S-ON, bootloader is locked (and won't accept my Unlock_code.bin), tampered flag is on, fastboot won't let me install anything because of a file signature error, No operating system, no working recovery.
If you can help me in any way at all, I'd be eternally grateful!
Dropbox link to potato-cam photos
Click to expand...
Click to collapse
The correct steps to Getting back to stock are here >> http://forum.xda-developers.com/showthread.php?t=2541082
Sunshine Soff...
I can't use either of those because I don't have a working OS and I can't flash one via bootloader because of a file signature verification error
Da Vikster said:
I can't use either of those because I don't have a working OS and I can't flash one via bootloader because of a file signature verification error
Click to expand...
Click to collapse
can you post a "fastboot getvar all" (excluding IMEI and s/n)
nkk71 said:
can you post a "fastboot getvar all" (excluding IMEI and s/n)
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
here you go
Da Vikster said:
here you go
Click to expand...
Click to collapse
Since you are now S-ON and LOCKED, you need to use signed RUU
for PN0710000 + HTC__001, try this one:
http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
http://androidruu.com/getdownload.p...31.27_10.31.1131.05_release_310878_signed.exe
remember to check MD5 of the download to make sure it's not corrupt
let me know how that goes
oh, and charge your battery

Categories

Resources