[Q] Not recognising USB, help ? - One (M7) Q&A, Help & Troubleshooting

So on my One, it is bootlooped so when i go onto TWRP and plug in my USB (connected to my computer) nothing happens, i have tried multiple USB's which work with other devices. Any ideas ?
Thanks

mrsimpson321 said:
So on my One, it is bootlooped so when i go onto TWRP and plug in my USB (connected to my computer) nothing happens, i have tried multiple USB's which work with other devices. Any ideas ?
Thanks
Click to expand...
Click to collapse
what does device manager show?
check if this is the problem, FAQ#2: http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2

no
nkk71 said:
what does device manager show?
check if this is the problem, FAQ#2: http://forum.xda-developers.com/showpost.php?p=52135024&postcount=2
Click to expand...
Click to collapse
nothing comes up at all whether its plugged in or not and device manager show nothing, any other ideas ?

mrsimpson321 said:
nothing comes up at all whether its plugged in or not and device manager show nothing, any other ideas ?
Click to expand...
Click to collapse
clean phone's usb port (gently), try a different cable

nkk71 said:
clean phone's usb port (gently), try a different cable
Click to expand...
Click to collapse
i have tried lots of cables which work with other androids and how do i clean the usb port ?
thanks

mrsimpson321 said:
i have tried lots of cables which work with other androids and how do i clean the usb port ?
thanks
Click to expand...
Click to collapse
don't know never had that problem.
compressed air-can i guess would work

having exactly same issue, tryed everything, from universal drivers to cleaning the port, changing pc´s , changing cables, it will only charge, no fastboot or adb can detect it, device manager displays nothing eighter...

Same for me :S

Related

I9001 not recognized by ODIN

I apologize if thread is already posted.
I tried to flash my i9001 to stock firmware but ODIN won't recognize my device. Actually my widows XP machine won't recognize it either.
Tried with different machine and reinstalled drivers and still nothing.
I have installed CWM recovery mode and phone is rooted.
Any suggestions how to flash it to stock firmware ?
Thanks in advance
getmeister said:
I apologize if thread is already posted.
I tried to flash my i9001 to stock firmware but ODIN won't recognize my device. Actually my widows XP machine won't recognize it either.
Tried with different machine and reinstalled drivers and still nothing.
I have installed CWM recovery mode and phone is rooted.
Any suggestions how to flash it to stock firmware ?
Thanks in advance
Click to expand...
Click to collapse
Check step by step to resolve your problem http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
xsenman said:
Check step by step to resolve your problem http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Click to expand...
Click to collapse
Sorry, but I forgot to mention that ac power adapter won't charge the phone also ... only when SGS+ is turned off ?!
getmeister said:
Sorry, but I forgot to mention that ac power adapter won't charge the phone also ... only when SGS+ is turned off ?!
Click to expand...
Click to collapse
can you explain what you mean by "only when SGS+ is turned off ?!"
can you charge by USB Cable?
xsenman said:
can you explain what you mean by "only when SGS+ is turned off ?!"
can you charge by USB Cable?
Click to expand...
Click to collapse
sometimes it does someties it doesn't ... odd isn't it
but still not recognized with winXP.
getmeister said:
sometimes it does someties it doesn't ... odd isn't it
but still not recognized with winXP.
Click to expand...
Click to collapse
Clean your contacts with alcohol and brush and try to use a on a different USB slot at back of PC
Did you try the solutions on the link, I posted?
xsenman said:
Clean your contacts with alcohol and brush and try to use a on a different USB slot at back of PC
Did you try the solutions on the link, I posted?
Click to expand...
Click to collapse
Tried on two win XP machines, and win 7 notebook. I really don't think there is a problem with machines
getmeister said:
Tried on two win XP machines, and win 7 notebook. I really don't think there is a problem with machines
Click to expand...
Click to collapse
Its not only about the machines, its also about the USB cable and USB slot, you need to isolate the problem by way of elimination....get a hold of another original samsung USB Cable to isolate that is not the cause and than examine your Phone USB slot for damage/mislaigned pins ...you can try moving the usb plug to see, if connection is being established
xsenman said:
Its not only about the machines, its also about the USB cable and USB slot, you need to isolate the problem by way of elimination....get a hold of another original samsung USB Cable to isolate that is not the cause and than examine your Phone USB slot for damage/mislaigned pins ...you can try moving the usb plug to see, if connection is being established
Click to expand...
Click to collapse
considering the cables ... got one from Samsung and other from Nokia, also ac power adapter is yet another so we eliminated the possibility of broken cables .
Still day after I sucessfully installed CWM recovery mode with ODIN.
So I suspect a problem with firmware
getmeister said:
considering the cables ... got one from Samsung and other from Nokia, also ac power adapter is yet another so we eliminated the possibility of broken cables .
Still day after I sucessfully installed CWM recovery mode with ODIN.
So I suspect a problem with firmware
Click to expand...
Click to collapse
Nokia Cables are not compatible with Samsung Phones and for ICS, its best to use Samsung Nexus drivers or ICS drivers
xsenman said:
Nokia Cables are not compatible with Samsung Phones and for ICS, its best to use Samsung Nexus drivers or ICS drivers
Click to expand...
Click to collapse
I got myself a new cable, installed Nexus drivers .... and gues what ....
SGS+ is charging but message is still there "USB device not recognized" ....
Do you have something else in mind ?
getmeister said:
I got myself a new cable, installed Nexus drivers .... and gues what ....
SGS+ is charging but message is still there "USB device not recognized" ....
Do you have something else in mind ?
Click to expand...
Click to collapse
Assuming you did not just buy any compatible cable, much to my regret, I myself have bought and found unusable .
and you have tried the Quick Guide
If phone is not being detected of a sudden (Quick Guide)
1. Reboot PC after a power cord pull and Reboot Phone after a Battery Pull , try USB connection
2. Try using a different Samsung USB cable (must be sumsung and nothing else)
3. Try a different USB port (use USB slots at the back of PC)
4. Try on a lap top or different PC
5. Try install nexus drivers - needed for ICS firmwares
6. Make sure you don't have fast charge on.
Trick : Putting your Phone into download mode and connecting it with USB cable to PC will do it automatically. Meaning drivers will be installed by windows If there are none.
Frankly, these works for me all the time, so I am a bit clueless as to why you are unable to. I mean losing USB connection is pretty common, happens every now and than.
You should also try switching off WIFI , reboot the phone, reboot the PC, start Odin and than plug in the phone ( this worked for some)
Since the USB is trying to connect but not recognized as to what it is, you should try again, this time using device manger as mentioned here http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
thats all I can think of
Finaly solved my problem!
Thanks!
Nothing helped, thank you for your effort.
Is there any way to flash to stock firmware other than ODIN ?
getmeister said:
Nothing helped, thank you for your effort.
Is there any way to flash to stock firmware other than ODIN ?
Click to expand...
Click to collapse
use MObile ODIN
xsenman said:
use MObile ODIN
Click to expand...
Click to collapse
Tried that too... "Device unsupported ....
change the cable if that dosnt helps try on windows 7 machine cuz once i flashed jw4 on ma windoes xp n d usb connection timed out n i ended with soft brick but got lucky that i could re enter download mode n i flashed jw4 again but in windown 7 machine happy flashing
YOMAN18 said:
change the cable if that dosnt helps try on windows 7 machine cuz once i flashed jw4 on ma windoes xp n d usb connection timed out n i ended with soft brick but got lucky that i could re enter download mode n i flashed jw4 again but in windown 7 machine happy flashing
Click to expand...
Click to collapse
tried with 2 WinXP machines , one Win7 and even Ubuntu 12.04 LTS
no luck
getmeister, you can not solve this problem? I also ran into her niznayu what to do, I know that never in my life do not put anything on this board if you solved the problem of how to write please [email protected]
If nothing works, then its most probably your mobile usb port.
Get it Samsung repair!
Sent from my GT-I9001 using xda app-developers app

One M7 no connect to usb only charge

Hi i have HTC One M7 801n and cant connect to PC, i try whith other cables, other computers, different usb ports and drivers, nothing works, the micro usb conector seems to be ok, no message apears in the phone and only charge, fastboot says "fastboot ac" when conect to pc. i have the bootloader unlocked but i whant at least root the phone, any ideas pls ?
Or some way to root the phone whitout connect to pc ? Adb over WiFi ? Please help !!!
PITA22 said:
Or some way to root the phone whitout connect to pc ? Adb over WiFi ? Please help !!!
Click to expand...
Click to collapse
Please ! any one ?
PITA22 said:
Please ! any one ?
Click to expand...
Click to collapse
unlocking the bootloader requires a PC how did you do it ?
clsA said:
unlocking the bootloader requires a PC how did you do it ?
Click to expand...
Click to collapse
I did before, when the usb worked
PITA22 said:
I did before, when the usb worked
Click to expand...
Click to collapse
does device manager see your phone
have you tried different usb ports and cables.
have you installed the HTC drivers
do you have usb debugging enabled in developer options ?
clsA said:
does device manager see your phone
have you tried different usb ports and cables.
have you installed the HTC drivers
do you have usb debugging enabled in developer options ?
Click to expand...
Click to collapse
device manager see it "unknow device"
different ports cables and PCs not work.
usb debugging or not its the same, not recognize and "unknow device"
PITA22 said:
device manager see it "unknow device"
different ports cables and PCs not work.
usb debugging or not its the same, not recognize and "unknow device"
Click to expand...
Click to collapse
Reboot your phone and computer then try to connect it again. If the same issue, then look at this post and see if it will help. I have also uninstalled the drivers, rebooted the computer and then install the drivers again but not HTC Sync Mgr.
majmoz said:
Reboot your phone and computer then try to connect it again. If the same issue, then look at this post and see if it will help. I have also uninstalled the drivers, rebooted the computer and then install the drivers again but not HTC Sync Mgr.
Click to expand...
Click to collapse
nothing works like i said before already try in other computers win 7, winxp etc, always "unknow device" already try whith the las versions of HTC Drivers, in win7 and other computer whith xp, always apears like unknow device in device manager, like i said before in fasboot mode says only "fastboot ac".
Before stop working in one chance, connects and disconnects constantly without me touch the cable and and suddenly stop working
PITA22 said:
nothing works like i said before already try in other computers win 7, winxp etc, always "unknow device" already try whith the las versions of HTC Drivers, in win7 and other computer whith xp, always apears like unknow device in device manager, like i said before in fasboot mode says only "fastboot ac".
Before stop working in one chance, connects and disconnects constantly without me touch the cable and and suddenly stop working
Click to expand...
Click to collapse
If you have not done it already, try wiggling the mini-usb cable to see if it improves anything. Is the phone charging? It might be a hardware problem, I have read in some other post that it is the motherboard. Sorry, I can not think of anything else.
majmoz said:
If you have not done it already, try wiggling the mini-usb cable to see if it improves anything. Is the phone charging? It might be a hardware problem, I have read in some other post that it is the motherboard. Sorry, I can not think of anything else.
Click to expand...
Click to collapse
Yes i try to move the cable in the side of the micro usb, and 5 Or 6 diferents cables, and yes, the phone only charge.
Its very strange because I bought the phone used and only works one day and the second day lost the connection to pc when in try to unlock the bootloader, the first time no connected and suddenly work, I can only unlock the bootloader and stop working.
PITA22 said:
Yes i try to move the cable in the side of the micro usb, and 5 Or 6 diferents cables, and yes, the phone only charge.
Its very strange because I bought the phone used and only works one day and the second day lost the connection to pc when in try to unlock the bootloader, the first time no connected and suddenly work, I can only unlock the bootloader and stop working.
Click to expand...
Click to collapse
Try to clean the phone's contacts with a little rubbing alcohol and/or compressed air. There maybe lint or dirt on the contacts preventing a good connection.
maybe this shud work for u , it worked for me
http://canvas2update.blogspot.nl/2014/11/not-connecting-as-usb-storage-only.html
go to your battery manager, disable fast reboot. then turn off the phone and start it back up. It worked for me
punit_pandya said:
http://canvas2update.blogspot.nl/2014/11/not-connecting-as-usb-storage-only.html
Click to expand...
Click to collapse
Unfortunately that link does not work anymore. What was on it?
Asking because I got an m7 here where USB works just fine and reliably in both fastboot and recovery. But when the system (any ROM, tried more than 10 now), there's only charging. No MTP, no nothing.
Laptop's `dmesg` says:
Code:
[150266.816544] usb 2-1.5: new high-speed USB device number 16 using ehci-pci
[150266.935189] usb 2-1.5: New USB device found, idVendor=0bb4, idProduct=0c02
[150266.935193] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[150266.935195] usb 2-1.5: Product: Android
[150266.935196] usb 2-1.5: Manufacturer: HTC
[150266.935197] usb 2-1.5: SerialNumber: XXXXXXXXXXXX
(1-2 seconds...)
Code:
[150359.023745] usb 2-1.5: USB disconnect, device number 16

Bricked my HTC One :(

I think I've completely bricked my HTC One, I accidentally deleted the ROM and now all I'm left with is the Bootloader. I've tried numerous USB cables and none of them seem to detect my phone when doing the adb thing, before I bricked the phone I don't think I enabled USB Debugging either .
Is there any way I can try and unbrick it?
Chaos Water said:
I think I've completely bricked my HTC One, I accidentally deleted the ROM and now all I'm left with is the Bootloader. I've tried numerous USB cables and none of them seem to detect my phone when doing the adb thing, before I bricked the phone I don't think I enabled USB Debugging either .
Is there any way I can try and unbrick it?
Click to expand...
Click to collapse
Take a look at this post, you might have to sideload the rom. This post might help you get your drivers straighten out.
majmoz said:
Take a look at this post, you might have to sideload the rom. This post might help you get your drivers straighten out.
Click to expand...
Click to collapse
Thanks, but I wouldn't even know where to start .
Chaos Water said:
Thanks, but I wouldn't even know where to start .
Click to expand...
Click to collapse
adb commands wont work whilst your in the bootloader, you need to use fastboot commands.
if you can get into the bootloader then your not bricked, bricked is when the phone wont switcxh on at all.
read up on how to post your fastboot getavr all, once you get it, post it here WITHOUT imei and serial number, and we will be able to help you much better get your phone back up and running.
here is a good place to start for adb and fastboot files and drivers, it doesn't get any easier than this: http://forum.xda-developers.com/showthread.php?t=2588979
also, USB debugging is only required when booted into a rom and has nothing to do with recovery or the bootloader.
Seanie280672 said:
adb commands wont work whilst your in the bootloader, you need to use fastboot commands.
if you can get into the bootloader then your not bricked, bricked is when the phone wont switcxh on at all.
read up on how to post your fastboot getavr all, once you get it, post it here WITHOUT imei and serial number, and we will be able to help you much better get your phone back up and running.
here is a good place to start for adb and fastboot files and drivers, it doesn't get any easier than this: http://forum.xda-developers.com/showthread.php?t=2588979
also, USB debugging is only required when booted into a rom and has nothing to do with recovery or the bootloader.
Click to expand...
Click to collapse
I have followed your steps, it comes up as waiting for device to get the information, but just stays on waiting for device.
Chaos Water said:
I have followed your steps, it comes up as waiting for device to get the information, but just stays on waiting for device.
Click to expand...
Click to collapse
could you post a screen shot of your cmd window please and the command you typed.
This is what it should look like:
Seanie280672 said:
could you post a screen shot of your cmd window please and the command you typed.
Click to expand...
Click to collapse
Here's what I get
Chaos Water said:
Here's what I get
Click to expand...
Click to collapse
do you have drivers installed ? it should say MyHTC in device manager ?
Seanie280672 said:
do you have drivers installed ? it should say MyHTC in device manager ?
Click to expand...
Click to collapse
I've just tried that as well, it's still coming up as waiting for device .
Seanie280672 said:
do you have drivers installed ? it should say MyHTC in device manager ?
Click to expand...
Click to collapse
It's not showing up in device manager either, not even a yellow question mark. What drivers do I need installed?
Chaos Water said:
It's not showing up in device manager either, not even a yellow question mark. What drivers do I need installed?
Click to expand...
Click to collapse
that's the problem then, go to the HTC site and download HTC Sync manager and install it, once its installed, goto add/remove programs and remove HTC sync only, you should see just above that, HTC driver installer, leave that one there.
when you plug your phone into the computer, you should then see it load the drivers, fastboot should work then.
Seanie280672 said:
that's the problem then, go to the HTC site and download HTC Sync manager and install it, once its installed, goto add/remove programs and remove HTC sync only, you should see just above that, HTC driver installer, leave that one there.
when you plug your phone into the computer, you should then see it load the drivers, fastboot should work then.
Click to expand...
Click to collapse
Installed the drivers, uninstalled HTC Sync Manager, nothing came up when the driver was installed and there's still nothing showing in Device Manager and Fastboot still doesn't work either .
Chaos Water said:
Installed the drivers, uninstalled HTC Sync Manager, nothing came up when the driver was installed and there's still nothing showing in Device Manager and Fastboot still doesn't work either .
Click to expand...
Click to collapse
could you post a screen of your device manager whilst your phone is plugged in please ?
Seanie280672 said:
could you post a screen of your device manager whilst your phone is plugged in please ?
Click to expand...
Click to collapse
Chaos Water said:
Click to expand...
Click to collapse
have you tried a different cable and USB port? when you connect the phone, it has to show up in Device Manager (even if it's not installed with the proper drivers, it still has to show up)
nkk71 said:
have you tried a different cable and USB port? when you connect the phone, it has to show up in Device Manager (even if it's not installed with the proper drivers, it still has to show up)
Click to expand...
Click to collapse
I've tried 5 different USB cables even a genuine HTC cable, tried all the USB ports and it's still not showing up.
Chaos Water said:
I've tried 5 different USB cables even a genuine HTC cable, tried all the USB ports and it's still not showing up.
Click to expand...
Click to collapse
that's weird, have you tried cleaning the phone's usb port? maybe some debris in there?
nkk71 said:
that's weird, have you tried cleaning the phone's usb port? maybe some debris in there?
Click to expand...
Click to collapse
I did the other day, loads of pocket lint came out and it looks clean.
Chaos Water said:
I did the other day, loads of pocket lint came out and it looks clean.
Click to expand...
Click to collapse
if your not getting any sound on your computer and no device is being detected at all then you have a faulty port on your phone.
Chaos Water said:
I did the other day, loads of pocket lint came out and it looks clean.
Click to expand...
Click to collapse
no idea in that case, hope the port isn't damaged
try a different PC, and does bootloader change from FASTBOOT to FASTBOOT USB when you connect it to the PC?

Fastboot won't recognize USB.

So I'm getting into fastboot mode but it just says FASTBOOT not FASTBOOT USB even thought it's plugged in. When USB is plugged in I can't even get into fastboot mode. Any ideas?
Ephemera said:
So I'm getting into fastboot mode but it just says FASTBOOT not FASTBOOT USB even thought it's plugged in. When USB is plugged in I can't even get into fastboot mode. Any ideas?
Click to expand...
Click to collapse
Follow here
yatindroid said:
Follow here
Click to expand...
Click to collapse
Tried following it but had no luck. Plus I'm on HBOOT 1.57, S-OFF, Bootloader unlocked, and using Window 8.1. I tried Ubuntu and followed the steps, but the phone still doesn't read FASTBOOT USB.
Ephemera said:
Tried following it but had no luck. Plus I'm on HBOOT 1.57, S-OFF, Bootloader unlocked, and using Window 8.1. I tried Ubuntu and followed the steps, but the phone still doesn't read FASTBOOT USB.
Click to expand...
Click to collapse
Is your usb cable a data cable or only a charging cable? Make sure its data capable, not only charging cable, try another cable, try another port (usb 2.0).
What is your version of htc drivers?
alray said:
Is your usb cable a data cable or only a charging cable? Make sure its data capable, not only charging cable, try another cable, try another port (usb 2.0).
What is your version of htc drivers?
Click to expand...
Click to collapse
Latest HTC drivers, tried 4 cables, multiple USB ports along with other computers. It is not a driver issue because the phone doesn't say FASTBOOT-USB nor is it shown in device manager.
Ephemera said:
Latest HTC drivers, tried 4 cables, multiple USB ports along with other computers. It is not a driver issue because the phone doesn't say FASTBOOT-USB nor is it shown in device manager.
Click to expand...
Click to collapse
SO it might be a defective usb port on your phone. Does usb-otg works?
alray said:
SO it might be a defective usb port on your phone. Does usb-otg works?
Click to expand...
Click to collapse
I can't get into to recovery, it boot loops. So how would I be able to test it? Plus I don't think I have an OTG cable.
Ephemera said:
I can't get into to recovery, it boot loops. So how would I be able to test it? Plus I don't think I have an OTG cable.
Click to expand...
Click to collapse
I guess that if your phone isn't detected both in windows and ubuntu its maybe a bad usb port on the phone or maybe a corrupted bootloader.
What caused the bootloop?
alray said:
I guess that if your phone isn't detected both in windows and ubuntu its maybe a bad usb port on the phone or maybe a corrupted bootloader.
What caused the bootloop?
Click to expand...
Click to collapse
CM12 was installed then about 2 months later the screen was replaced (Phone was apparently completely drained), is there a way to fix a corrupted bootloader?
Have stumbled upon this https://www.ifixit.com/Answers/View/167884/iPhone+5s+-+Infinite+boot+loop+(after+screen+replacement
Hmmm this guy seems to have the same issue. I'm guessing a screw in the wrong spot causes some kind of short? Even though each screw had a different size and thread.
What do you think?

Question Phone is only fast changing on original cable + phone is not detecting on pc

fast charging is only working on original cable and phone is not detecting on pc, i also tried USB handset but not work
Isyedjawad said:
fast charging is only working on original cable and phone is not detecting on pc, i also tried USB handset but not work
Click to expand...
Click to collapse
Connect the phone to your PC, then head to the "Android System" on your silent notifications, find "Charging this device via USB", tap on it and you'll be taken to the USB page, then tap on "File Transfer"
BMHater12 said:
Connect the phone to your PC, then head to the "Android System" on your silent notifications, find "Charging this device via USB", tap on it and you'll be taken to the USB page, then tap on "File Transfer"
Click to expand...
Click to collapse
i connect my phone to laptop, nothing detects but only slow charging starts, even USB debugging is on, default mtp is chosen but no results.
i tried to connect type c handfree with it but not working.
Sounds like your port is broken, might need a replacement.
fobtob387 said:
Sounds like your port is broken, might need a replacement.
Click to expand...
Click to collapse
if it's broken, why it's doing full turbo change on default cable.
Isyedjawad said:
fast charging is only working on original cable and phone is not detecting on pc, i also tried USB handset but not work
Click to expand...
Click to collapse
For me the original cable doesn't work when connecting to pc but all the other cabels have worked, so have you tried connecting to your pc with a different cable?
Quower said:
For me the original cable doesn't work when connecting to pc but all the other cabels have worked, so have you tried connecting to your pc with a different cable?
Click to expand...
Click to collapse
i did, nothing worked. but actually few mins ago i switch to other region by trickling my phone ( renamed the rom to current version and update it via updater method)
after that i start facing this issue.
Isyedjawad said:
i did, nothing worked. but actually few mins ago i switch to other region by trickling my phone ( renamed the rom to current version and update it via updater method)
after that i start facing this issue.
Click to expand...
Click to collapse
You wrote the problem on Wednesday and now you wrote a new problem or the same a few minutes ago?
May you've flashed wrong fw....
Laptapper said:
You wrote the problem on Wednesday and now you wrote a new problem or the same a few minutes ago?
May you've flashed wrong fw....
Click to expand...
Click to collapse
i think that's the reason am facing this type of issue because i bypass rom to different region, is there any method to reset developer settings to default without hard reset?
Isyedjawad said:
i think that's the reason am facing this type of issue because i bypass rom to different region, is there any method to reset developer settings to default without hard reset?
Click to expand...
Click to collapse
In my opinion. Clean flash with fw
Laptapper said:
In my opinion. Clean flash with fw
Click to expand...
Click to collapse
Phone is not detecting on Laptop how to do that?
Isyedjawad said:
Phone is not detecting on Laptop how to do that?
Click to expand...
Click to collapse
Windows PC needs Xiaomi drivers

Categories

Resources