Hi all!
First sorry if this is not the right Forum.
I have flashed many roms In my xt1502
But by now it does not matter the ROM i try, WiFi will not work
I am using clockmod recovery.
Thanks of backup i can still keep using pac-man ROM but none of the other roms based on CM11
Thanks for your help.
I have googled and the answers are not clear
I have tried to change kernels and recovery but issues remain still!
When flashing CM12 based ROM, WiFi works again... So i guess the problem is the build?
Solution
Thanks to myself...
I solved the problem: install TWR 2.6 version, then factory reset. Version 2.8 of TWRP makes sometimes "update binary" error.
You must install a ROM based on any CM11 before 20141104, and then you always do a dirty flash of later version of the choosen rom
I guess there must be something ROM in The versions of cm11 after that date, at least form xt1502 model.
Related
Lately, I've been trying to flash 3 custom roms on my ace.
Everytime I was dissapointed to see a status 7 error in CWM.
First, I thought it was something in the particular rom that i'd tried to flash. But when I tried to flash PAC rom this morning, I started to think whether it might be caused by my current rom: CM9 final from Mclaw.
At first, I've tried to flash the cm7.2 rc3 blackhawk/firekernel roms. One suggestion that was made by someone was that It might me a problem to flash cm7.2 over cm9. He advised me to try to flash stock again and then try again.
But I've tried to flash pac rom this morning, and again, I received a status 7 error. I cannot believe that it is just bad luck that I download roms with errors in the updater-script.
Is it possible there is some incompatibility flashed by cm9 so other roms cannot be flashed right now?
please, close/delete topic. I've tried to delete it myself.
Posted the question in the Q&A section....
Hi,
at first i try to post in the related thread, but i havn't enough posts to do this.
http://forum.xda-developers.com/galaxy-s3/development-i9305/rom-beta-t2535996
After flashing the latest ROM my phone can't get a network connection. Wifi works. I used CWM 6.0.4.7, SlimKat Build 3.6 and the latest gapps from SlimRom (Build 3). I can't receive baseband, network, phone number or IMEI in the settings. All is unknown. Also when the phone starts, it doesn't ask for my PIN.
Re-install doesn't work. Another SIM doesn't work, too. CM 10.1.3 works fine.
Model: GT-I9305
Provider: Vodafone
Baseband: I9305XXUEMK1
Some ideas?
That is not a rom problem, for sure.. What can I say, you are doing everything right, but I might recommend using Philz recovery, I've never had any problem with it. Reboot recovery, full wipe and then flash
Try to flash with Odin latest stock 4.3 kernel and then try again with wiping everything before.
Hey guys,
thanks for your advices. I wasn't at home, so I couldn't response or even try it.
Today I flashed the new SlimKat 3.8 (still with CWM) and it works Maybe it was a problem with the ROM.
Thanks anyway :good:
Druffbold said:
Hey guys,
thanks for your advices. I wasn't at home, so I couldn't response or even try it.
Today I flashed the new SlimKat 3.8 (still with CWM) and it works Maybe it was a problem with the ROM.
Thanks anyway :good:
Click to expand...
Click to collapse
For sure it was problem with ROM. Actually with radio ROM, not the Android itself.
Make a backup of your ROM and save radio image from it.
Then you can flash some other ROM you like and flash this working radio image after that.
Hi guys,
I have just started playing with my GSG3 lte after upgrading from a SGS1 that I rooted and put a cg7 rom on it. That was many years ago and I am just relearning how to get along with it all again.
I have managed to get CWM on it (and to stay there!!!) and have superSU on as well. I am trying to flash this kernel mentioned in the title but every time it does not stick. The old kernel remains.
I have tried clearing the cache and that dilyic cashe (or what ever it is) then flashing but to no avail. I have read the entire thread but came across nothing that helps. Do you guys have any info or ideas I can try? The phone is running the stock rom.
Here is the thread for the kernel i am trying to flash.
Android 4.3.0 AGNi pureSTOCK v3.8 NA2+
Flashing by getting into CWM, choosing the clear cache options and then flashing from the sd card.
Thanks for any help you guys may have!
Spaz.
What is your ROM base? I had the same problem until I flashed a ROM with an NA2 or greater base, then it worked fine. My suggestion, is to use Amcha's ROM.
Sent from my GT-I9305 using Tapatalk
I've been running the kernel along with xxueml9 firmware, so no <NA2 fw neccessary.
do you have latest CWM? as there are numerous posts about problems while flashing new roms/files using old recoveries
in case of problems with that I'd advise using skipsoft utility and let it find the newest compatible recovery image and let you guide through the flashing process
Ok, looks like i am running the xxuena2 rom???? It is the standard software that came with the phone. CWM version is v5.5.0.4 : CF- v1.5
It was sorted out by updating the CWM to latest version.
Thanks guys for the replys and help.
I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.
Jeffril said:
I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.
Click to expand...
Click to collapse
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.
NoDze said:
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.
Click to expand...
Click to collapse
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?
Jeffril said:
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?
Click to expand...
Click to collapse
Okay, This is SFSP by @sgspluss which is a pretty fast, stable and battery-friendly slimmed down version of stock ICS. It is available for both Old and NewBL, so you might want to try that first. This is AIO Toolkit. I know that you've used it and bricked your phone, but try again, and for the love of God install the nvflash drivers because most people skip that part. You have to do it manually and if you're running Windows 8 you need to disable Driver Signature Verification. But yeah, you switch bootloaders with this.
I was using stock 9.0.3 with unlocked bootloader and data encrypted.
Last night I tried to flash Skydragon ROM without any firmware. It booted to system but calls are not working. I then flashed oreo 5.0.8 fw but in vein. I also flashed "9.0.3 bl fw with 5.0.8 key master", even the Calls are not working. I thought there may be some issues in Skydragon latest ROM, so I flashed Nitrogen ROM but with the same issue. It also booted and I used all types of fw but Calls are again not working.
Now I thought the better way to install the ROM is to format the phone. So, I formatted the phone rebooted back to TWRP(latest one) and then flashed the Skydragon ROM with oreo firmware. Now, I am shocked, even if I am flashing the ROM after formatting but each ROM now flashed is having problems of neither outgoing calls nor incoming.
I finally flashed again 9.0.3 ROM after formatiing so that I may get calls functionality.
The conclusion is that I am unable to flash custom ROM.
Is anybody has the answer, what am I doing wrong. How to flash custom ROM?
sandeep_kumar said:
I was using stock 9.0.3 with unlocked bootloader and data encrypted.
Last night I tried to flash Skydragon ROM without any firmware. It booted to system but calls are not working. I then flashed oreo 5.0.8 fw but in vein. I also flashed "9.0.3 bl fw with 5.0.8 key master", even the Calls are not working. I thought there may be some issues in Skydragon latest ROM, so I flashed Nitrogen ROM but with the same issue. It also booted and I used all types of fw but Calls are again not working.
Now I thought the better way to install the ROM is to format the phone. So, I formatted the phone rebooted back to TWRP(latest one) and then flashed the Skydragon ROM with oreo firmware. Now, I am shocked, even if I am flashing the ROM after formatting but each ROM now flashed is having problems of neither outgoing calls nor incoming.
I finally flashed again 9.0.3 ROM after formatiing so that I may get calls functionality.
The conclusion is that I am unable to flash custom ROM.
Is anybody has the answer, what am I doing wrong. How to flash custom ROM?
Click to expand...
Click to collapse
Well it seems to be pretty much complicated problem while I think not using any firmware is the problem because there is not any other problem that seems to me is bothering with the calling services moreover did you flashed custom ROM from twrp or not and before doing that have you selected wipe and check... You didn't explained your steps correctly I have flashed both the roms to test and they are working fine on my device and going back to stock and again flashing to another seems to work for me you are missing some important step in flashing I think so...
CamRooni said:
Well it seems to be pretty much complicated problem while I think not using any firmware is the problem because there is not any other problem that seems to me is bothering with the calling services moreover did you flashed custom ROM from twrp or not and before doing that have you selected wipe and check... You didn't explained your steps correctly I have flashed both the roms to test and they are working fine on my device and going back to stock and again flashing to another seems to work for me you are missing some important step in flashing I think so...
Click to expand...
Click to collapse
I have flashed many ROMs. and as per my knowledge I flahsed the ROM after formatting the user data.
Then copied the zip files to device after rebooting to recovery off course.
Then you know: flash ROM followed by Gapps. I have flashed NOS, NLOS, RR, Skydragon. All booted but calls are not working.
Finally I decided to overcome the issue.
I flahsed 5.0.8 ROM and after booting I made a clean flash for the NOS.
Now, ROM succeeded and all is working along with call.
sandeep_kumar said:
I was using stock 9.0.3 with unlocked bootloader and data encrypted.
Last night I tried to flash Skydragon ROM without any firmware. It booted to system but calls are not working. I then flashed oreo 5.0.8 fw but in vein. I also flashed "9.0.3 bl fw with 5.0.8 key master", even the Calls are not working. I thought there may be some issues in Skydragon latest ROM, so I flashed Nitrogen ROM but with the same issue. It also booted and I used all types of fw but Calls are again not working.
Now I thought the better way to install the ROM is to format the phone. So, I formatted the phone rebooted back to TWRP(latest one) and then flashed the Skydragon ROM with oreo firmware. Now, I am shocked, even if I am flashing the ROM after formatting but each ROM now flashed is having problems of neither outgoing calls nor incoming.
I finally flashed again 9.0.3 ROM after formatiing so that I may get calls functionality.
The conclusion is that I am unable to flash custom ROM.
Is anybody has the answer, what am I doing wrong. How to flash custom ROM?
Click to expand...
Click to collapse
I have the same issue in pixel experience 12+ rom and my device is poco m2 v12.0.1 and same problem with lineage os. Any idea how to fix this?
hr6969 said:
I have the same issue in pixel experience 12+ rom and my device is poco m2 v12.0.1 and same problem with lineage os. Any idea how to fix this?
Click to expand...
Click to collapse
Did you got any fix?