Database Develop

[Q] revone failed (error code = 1)

I'm trying to get s-off but revone is keep failing with error code 1.
My One is a developer edition and hboot 1.44
Any idea? Thanks!

pirateye said:
I'm trying to get s-off but revone is keep failing with error code 1.
My One is a developer edition and hboot 1.44
Any idea? Thanks!
Click to expand...
Click to collapse
Had the same problem. You are probably on Android 4.3. and revone works on 4.2.2.
Here's what I did:
-Download any 4.2.2 rom (doesn't matter which one, just needs to be 4.2.2) You can download this: http://llabtoofer.com/2013/08/20/486/
-Make a nanadroid backup.(IMPORTANT if you don't want to lose anything)
-Wipe everything/ factory reset and flash the 4.2.2 rom
-Follow the steps for s-off with revone
-After you get s-off, go to recovery and restore from the nandroid backup
Now you will have s-off and all your data.

Ktan188 said:
Had the same problem. You are probably on Android 4.3. and revone works on 4.2.2.
Here's what I did:
-Download any 4.2.2 rom (doesn't matter which one, just needs to be 4.2.2) You can download this: http://llabtoofer.com/2013/08/20/486/
-Make a nanadroid backup.(IMPORTANT if you don't want to lose anything)
-Wipe everything/ factory reset and flash the 4.2.2 rom
-Follow the steps for s-off with revone
-After you get s-off, go to recovery and restore from the nandroid backup
Now you will have s-off and all your data.
Click to expand...
Click to collapse
It worked! Thanks a lot! :highfive:

Thanks for this I was having the same problem I'm downloading the 4.2.2 rom and doing the backup. I hope this works for me too

Ktan188 said:
Had the same problem. You are probably on Android 4.3. and revone works on 4.2.2.
Here's what I did:
-Download any 4.2.2 rom (doesn't matter which one, just needs to be 4.2.2) You can download this: http://llabtoofer.com/2013/08/20/486/
-Make a nanadroid backup.(IMPORTANT if you don't want to lose anything)
-Wipe everything/ factory reset and flash the 4.2.2 rom
-Follow the steps for s-off with revone
-After you get s-off, go to recovery and restore from the nandroid backup
Now you will have s-off and all your data.
Click to expand...
Click to collapse
Finally.. after hours of Googling an answer! Thanks so much.

Thanks a LOT!!!! I was really hating my device, didn't know what the problem is.
I will try it, finally found an answer...

Thanks...will try your method now.

Thanks!
Thank you very much for the help in this thread

i tried this one via a recovery.
but failed.. Even the Phone didn't boot and also cannot go back in recovery.
the phone is Bricked again flashed the ROM Sprint.
hBoot : 1.55.0000
OS: 3.05.651.5

[email protected] said:
i tried this one via a recovery.
but failed.. Even the Phone didn't boot and also cannot go back in recovery.
the phone is Bricked again flashed the ROM Sprint.
hBoot : 1.55.0000
OS: 3.05.651.5
Click to expand...
Click to collapse
1- be careful about the advice you get here, most of us are on M7_U / UL models not Sprint
2- revone only works on hboot 1.44
3- all s-off methods need a booted up rom!! not recovery!!!
4- use http://rumrunner.us/ or http://firewater-soff.com/ to get s-off on hboot 1.54+
5- if you're not sure what you're doing, do a little bit of research first (reading is preferred IMHO, over videos) until you are comfy with what you're doing.

the firewater also didnt work..
and nor Rumrunner

[email protected] said:
the firewater also didnt work..
and nor Rumrunner
Click to expand...
Click to collapse
Thanks for sharing as little information as possible.
1- do you know what s-on / s-off is? and what you can and cannot do with it? and whether you actually need it??
2- are you locked/unlocked (I'm talking about bootloader)
3- how about you start by posting a "fastboot getvar all" (excluding IMEI, MEID, and s/n)
4- what ROM you're running
5- a copy/paste of rumrunner and/or firewater output

nkk71 said:
Thanks for sharing as little information as possible.
1- do you know what s-on / s-off is? and what you can and cannot do with it? and whether you actually need it??
2- are you locked/unlocked (I'm talking about bootloader)
3- how about you start by posting a "fastboot getvar all" (excluding IMEI, MEID, and s/n)
4- what ROM you're running
5- a copy/paste of rumrunner and/or firewater output
Click to expand...
Click to collapse
-> yeah i know what the S-ON and S-OFF stands for.
-> yeah i need to flash a Raido.img so as to make Phone to work for SIM based for CDMA.
-> i tried flashing the radio, after rooting and unlocking, but Mr. Kapil Sir said that you have to first s-off, then u can flash radio.img
-> i am using 4.3.android. sw version : 3.05.651.5
-> firewater does nothing, where as rumrunner Pouring.... got for 8 times and asked to run after 30 seconds again for a luck to s-off.
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
it's a little stinky here, hmm....
bottles are packed, here we go, shhhhhh....
hmm, cap is on tighter than I expected........
hell, that damn cap is on REALLY tight.......
pouring (1)..........................
pouring (2)...........................
pouring (3)..........................
pouring (4)...........................
pouring (5)..........................
pouring (6)...........................
pouring (7)..........................
pouring (8)...........................
Wait 30 seconds, power on device, pray, run rumrunner again.
Press ENTER to exit
executed the above exe for 3 times but same ans...
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 1.00.20.1108
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.05.651.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA35XXXXxxX164
(bootloader) imei: 9XXXXXXXXXXX499
(bootloader) meid: 99XXXXXXXXXX49
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4314mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-35824024
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.133s

[email protected] said:
-> yeah i know what the S-ON and S-OFF stands for. okay, fair enough
-> yeah i need to flash a Raido.img so as to make Phone to work for SIM based for CDMA. interesting
-> i tried flashing the radio, after rooting and unlocking, but Mr. Kapil Sir said that you have to first s-off, then u can flash radio.img I'm not familiar with Mr. Kapil Sir, or his radio flashing techniques... then again on the M7_U/UL you can flash radios without the need to be s-off, and I would assume the same for all M7 models
-> i am using 4.3.android. sw version : 3.05.651.5 not what i asked
-> firewater does nothing, where as rumrunner Pouring.... got for 8 times and asked to run after 30 seconds again for a luck to s-off. also not what i asked
Click to expand...
Click to collapse
okay, point taken Sir.

Sorry for not getting what u asked but tried my best to answer the Q's asked.
anyways Sorry again.
so what next..?
---------- Post added at 02:56 AM ---------- Previous post was at 02:50 AM ----------
Was trying to Flash a radio...
Please Check,
hope u might get the way out...
WHile S-ON
F:\Mobiles\Android\fastboot>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.039s]
finished. total time: 0.040s
F:\Mobiles\Android\fastboot>fastboot flash radio CT3G_radio.zip
target reported max download size of 1526722560 bytes
sending 'radio' (18824 KB)...
OKAY [ 2.381s]
writing 'radio'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 5.342s
while S-OFF got with firewater worked and helped to S-OFF
F:\Mobiles\Android\fastboot>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.055s]
finished. total time: 0.056s
F:\Mobiles\Android\fastboot>fastboot flash radio CT3G_radio.zip
target reported max download size of 1526722560 bytes
sending 'radio' (18824 KB)...
OKAY [ 2.381s]
writing 'radio'...
FAILED (remote: not allowed)
finished. total time: 2.427s
for sure it works after S-OFF .
but the minor mistake can led for failure and did a big mistake - a dump i m...
ok will correct.... hope u too have missed the correction..
but the think was
fastboot flash zip CT3G_radio.zip
where as i was writing
fastboot flash radio CT3G_radio.zip
so please dont sleep like me and do thinks..
sorry for diverting... but a good lesson for silly mistakes...

nkk71 said:
1- be careful about the advice you get here, most of us are on M7_U / UL models not Sprint
2- revone only works on hboot 1.44
3- all s-off methods need a booted up rom!! not recovery!!!
4- use http://rumrunner.us/ or http://firewater-soff.com/ to get s-off on hboot 1.54+
5- if you're not sure what you're doing, do a little bit of research first (reading is preferred IMHO, over videos) until you are comfy with what you're doing.
Click to expand...
Click to collapse
Hi
I am wondering if you can help me.
I am getting this error..revone failed (error code = -1) after runing ./revone -s 0 -u
(No 6 on http://forum.xda-developers.com/showthread.php?t=2314582)
***TAMPERED***
UNLOCKED
H-Boot 1.44
ROM 4.1.2
S-On
I am trying to get S-OFF so that I can remove the TAMPERED line.
I had success with ./revone -P and rebooted as per instructions.
However after reboot and running ./revone -s 0 -u
I get this
-------------------------------------
[email protected]:/data/local/tmp $ ./revone -s 0 -u
./revone -s 0 -u
revone v0.2.1
Gaining root access (thanks to Dan's motochopper)...Success.
revone failed (error code = -1)
255|[email protected]:/data/local/tmp $
______________________________________________
Any suggestions. Been trying to get to stock so I can return my device for the last 10 hours....so frustrating..
Thank you.

globalgpj said:
Hi
I am wondering if you can help me.
I am getting this error..revone failed (error code = -1) after runing ./revone -s 0 -u
(No 6 on http://forum.xda-developers.com/showthread.php?t=2314582)
***TAMPERED***
UNLOCKED
H-Boot 1.44
ROM 4.1.2
S-On
I am trying to get S-OFF so that I can remove the TAMPERED line.
I had success with ./revone -P and rebooted as per instructions.
However after reboot and running ./revone -s 0 -u
I get this
-------------------------------------
[email protected]:/data/local/tmp $ ./revone -s 0 -u
./revone -s 0 -u
revone v0.2.1
Gaining root access (thanks to Dan's motochopper)...Success.
revone failed (error code = -1)
255|[email protected]:/data/local/tmp $
______________________________________________
Any suggestions. Been trying to get to stock so I can return my device for the last 10 hours....so frustrating..
Thank you.
Click to expand...
Click to collapse
can you post a fastboot getvar all (excluding IMEI and s/n)
edit: and what ROM are you running

nkk71 said:
can you post a fastboot getvar all (excluding IMEI and s/n)
edit: and what ROM are you running
Click to expand...
Click to collapse
Hi Nkk71,
I got an even bigger problem now.
I was planning on returning my M7 to get the dreaded purple haze camera fixed. Got the GRA from the company already.
I tried to get the device to S-OFF after I got it S-On as the TAMPERED writing appeared again.
I tried revone and it always failed on line 6 ./revone -s 0 -u.
I went to try firewater and it said it couldn't do it and said to reboot.
As i rebooted into a stock rom, I went to Settings, got and error message and it asked if I wanted to send the error to HTC, I clicked no, then it went into a reboot and has been stuck on a WHITE boot screen (HTC One) and won't do anything.
I can't shut it down (tried holding down the power button 2 min+), I can boot into bootloader, I can't do anything either if I put my usb cable in either adb or fastboot, it is really FROZEN !!!!
Have I bricked my phone
I even tried to install the RUU but it failed as it needs to have a working USB connection.
It seems that all I can do is wait til the battery dies naturally.
Any advice ?
After 20 minutes still frozen boot screen. I can see the amber light on behind the speaker screen.
-------------------------------------------------------------------------
***TAMPERED***
UNLOCKED
S-ON
CID - HTC__001
H-Boot 1.44
ROM 4.1.2 (stock)
I'm running this stock ROM, RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed
and have TWRP installed.

globalgpj said:
Hi Nkk71,
I got an even bigger problem now.
Any advice ?
Click to expand...
Click to collapse
Firstly and most importantly: calm down, take it easy, chill out, and relax.... you are now panicking and starting to rush things!!
Once you've relaxed a bit:
Force reboot: press and hold POWER + VOLDOWN (under a bright light, not kidding!!), after about 5 seconds or so buttons should start blinking, and after 30 seconds or so, the phone will reboot, let go of POWER, but keep holding VOLDOWN to get back to bootloader.
(you may need to try 2 or 3 times to get it right)
and then let's see that "fastboot getvar all" (excluding IMEI and s/n)

nkk71 said:
Firstly and most importantly: calm down, take it easy, chill out, and relax.... you are now panicking and starting to rush things!!
Once you've relaxed a bit:
Force reboot: press and hold POWER + VOLDOWN (under a bright light, not kidding!!), after about 5 seconds or so buttons should start blinking, and after 30 seconds or so, the phone will reboot, let go of POWER, but keep holding VOLDOWN to get back to bootloader.
(you may need to try 2 or 3 times to get it right)
and then let's see that "fastboot getvar all" (excluding IMEI and s/n)
Click to expand...
Click to collapse
Thanks a million !!! It worked.. I heard that before, but forgot all about it. You don't hear much about that trick these days.
Yeah , no brick
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.13.3231.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.401.7
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4060mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.049s
-------------------
Should I try the Moonshine S-Off software to try and S-Off the device ?
http://forum.xda-developers.com/showthread.php?t=2291087

RELOCKED bootloader ! Getting RUU Error 155

I have T mobile HTC ONE.
I tried to go back to stock T Mobile version. But getting RUU.exe error 155.
Tried RUU :
RUU_M7_UL_JB_50_TMOUS_1.27.531.11_Radio_4A.17.3250.20_10.40.1150.04_release_324846_signed
RUU_M7_UL_JB43_SENSE50_MR_TMOUS_3.24.531.3_Radio_4A.21.3263.03_10.38m.1157.04_release_336982_signed_2(2)
My HTC ONE is RELOCKED bootloader.
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.24.3263.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.531.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4285mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
Click to expand...
Click to collapse
Tried to Downgrade hboot to original 1.44 but failed .
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>fastboot flash zip orig_hboot
_1.44.0000_M7_RUUmode.zip
target reported max download size of 1514139648 bytes
sending 'zip' (486 KB)...
OKAY [ 0.234s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.281s
Click to expand...
Click to collapse
If I tried to flash any img, zip it always shows FAILED (remote: signature verify fail) By This I can't S OFF my HTC one. :crying:
I can't install recovery due to signature verify fail. So...
Any Idea ? How Can I fix it ?

Divyashwar said:
I have T mobile HTC ONE.
I tried to go back to stock T Mobile version. But getting RUU.exe error 155.
Tried RUU :
RUU_M7_UL_JB_50_TMOUS_1.27.531.11_Radio_4A.17.3250.20_10.40.1150.04_release_324846_signed
RUU_M7_UL_JB43_SENSE50_MR_TMOUS_3.24.531.3_Radio_4A.21.3263.03_10.38m.1157.04_release_336982_signed_2(2)
My HTC ONE is RELOCKED bootloader.
Tried to Downgrade hboot to original 1.44 but failed .
If I tried to flash any img, zip it always shows FAILED (remote: signature verify fail) By This I can't S OFF my HTC one. :crying:
I can't install recovery due to signature verify fail. So...
Any Idea ? How Can I fix it ?
Click to expand...
Click to collapse
You need to have unlocked the bootloader to change recovery and S-off to change hboota ( downgrade)

Mutasek24 said:
You need to have unlocked the bootloader to change recovery and S-off to change hboota ( downgrade)
Click to expand...
Click to collapse
Yeah ! I just did this bro ! .
fastboot flash unlocktoken Unlock_code.bin
Now, Bootloader is unlocked and have recovery TWRP.
Going for S-OFF now.
soon update more...
Thank you

Cannot able to get S-OFF .
I'm On 4.4.2 hboot 1.56
I used rumrunner !
but its not working ....
smells lovely in here....
bottles are packed, here we go, shhhhhh....
pouring (1)...................
pouring (2)....................
pouring (3).....................
pouring (4)......................
pouring (5).....................
pouring (6)......................
pouring (7).......................
pouring (8)......................
Wait 30 seconds, power on device, pray, run rumrunner again.
Press ENTER to exit
so, any idea ? how to get S-Off ?
Thank you

Divyashwar said:
Cannot able to get S-OFF .
I'm On 4.4.2 hboot 1.56
I used rumrunner !
but its not working ....
smells lovely in here....
bottles are packed, here we go, shhhhhh....
pouring (1)...................
pouring (2)....................
pouring (3).....................
pouring (4)......................
pouring (5).....................
pouring (6)......................
pouring (7).......................
pouring (8)......................
Wait 30 seconds, power on device, pray, run rumrunner again.
Press ENTER to exit
so, any idea ? how to get S-Off ?
Click to expand...
Click to collapse
1- go back edit your post and remove IMEI, you shouldnt be sharing that
2- (bootloader) version-main: 4.19.531.10 -> what ROM are you running? recommend a rooted ROM with unsecured kernel such as ARHD 52.0
3- try http://firewater-soff.com/

nkk71 said:
1- go back edit your post and remove IMEI, you shouldnt be sharing that
2- (bootloader) version-main: 4.19.531.10 -> what ROM are you running? recommend a rooted ROM with unsecured kernel such as ARHD 52.0
3- try http://firewater-soff.com/
Click to expand...
Click to collapse
Yes ! I'm on Android_Revolution_HD-One_52.0
It not working....
I think ARHD 52 using Stock kernal

Divyashwar said:
Yes ! I'm on Android_Revolution_HD-One_52.0
It not working....
I think ARHD 52 using Stock kernal
Click to expand...
Click to collapse
ARHD has stock kernel but unsecured so that's OK.
but, firewater not working either?

nkk71 said:
ARHD has stock kernel but unsecured so that's OK.
but, firewater not working either?
Click to expand...
Click to collapse
Thank you !
Firewater works
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>adb reboot
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>adb push firewater /data/loca
l/tmp
3795 KB/s (4347896 bytes in 1.118s)
C:\Users\_Dj_\Desktop\OneDrivers_Fastboot\Fastboot>adb shell
[email protected]:/ # su
su
[email protected]:/ # chmod 755 /data/local/tmp/firewater
chmod 755 /data/local/tmp/firewater
[email protected]:/ # /data/local/tmp/firewater
/data/local/tmp/firewater
==================== firewater S-OFF 0.4.0 ==============================
firewater S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running firewater S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
firewater S-OFF may not be rehosted, repackaged, one-clicked, etc.
support is available @ #firewater on the freenode and andirc networks
support is much faster there vs.posting helpme threads on xda etc
Do not operate a motor vehicle after interacting with firewater
Do not inhale firewater or allow firewater to come in contact with eyes
firewater is best served at extremely cold temperatures
firewater has been known to cause temporary lapses in judgement
DO NOT TAUNT FIREWATER, YOU'VE BEEN WARNED
=========================================================================
Do you understand the implications of these warnings?
(Yes/No)
Yes
Yes
Yes
Yes
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
!!If firewater hangs for more than 2 minutes or device enters qhusb mode, ho
ld power for 60 seconds !!
=========================================================================
preparing, one moment
The first bottle is open
chugging..........
that firewater was good and hot, throwing out the empties
=========================================================================
==== device is now s-off. Don't forget to send us all your money =====
=========================================================================
=============== paypal: [email protected] =======================
=========================================================================
[email protected]:/ # Yes
sh: Yes: not found
127|[email protected]:/ #
Click to expand...
Click to collapse

Divyashwar said:
Thank you !
Firewater works
Click to expand...
Click to collapse
:good::good:
Now remember: once S-Off stay S-Off (unless you need to send it to warranty or sell it, in which case going from S-Off to S-On needs to be done at an exact point in time!!!)
also with S-Off, there is no need to lock/relock bootloader to flash stuff!!!

nkk71 said:
:good::good:
Now remember: once S-Off stay S-Off (unless you need to send it to warranty or sell it, in which case going from S-Off to S-On needs to be done at an exact point in time!!!)
also with S-Off, there is no need to lock/relock bootloader to flash stuff!!!
Click to expand...
Click to collapse
Thanks for info !
Last question !
If I want to go back to stock !
Then I need to just run RUU.exe ? or need some more steps ?

Divyashwar said:
Thanks for info !
Last question !
If I want to go back to stock !
Then I need to just run RUU.exe ? or need some more steps ?
Click to expand...
Click to collapse
If you're going for a downgrade RUU.EXE then you need to downgrade hboot separately first, if you are on hboot 1.55+
May I recommend you take a look at my guide on how to return to stock: http://forum.xda-developers.com/showthread.php?t=2541082
(in particular the FAQs, especially if you are on Win8.1)
If you're keeping the phone, you can skip the LOCKED part and the S-On part (those are for people returning for warranty, or selling the phone).
Let me know if you have questions
Cheers

Hi all, I have a problem after send my ONE to claim violet/red camera
Now I want to root ONE again (I already root before) but in this time I wipe wrong partition that cause me have "no os install"
My hboot = 1.56 / S-ON / TWRP = 2.6.3.3
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA355W908122
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__044
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
I try to read many many forums to make my ONE is back to normal, I have some question to ask what I need to do ?
I need to change S-ON to S-OFF (But now I cannot and I have tried for moonshell, rumrunner and firewater)
- all of method above need some ROM right?
If need some ROM can I install ROM in TWRP with "adb sideload" or "adb push" right?
Or I can help my ONE with another method that easily way that I want to do?
Please sugguestion I need all comment and Thank you very much sir.

RobbieKeane said:
Hi all, I have a problem after send my ONE to claim violet/red camera
Now I want to root ONE again (I already root before) but in this time I wipe wrong partition that cause me have "no os install"
My hboot = 1.56 / S-ON / TWRP = 2.6.3.3
I try to read many many forums to make my ONE is back to normal, I have some question to ask what I need to do ?
I need to change S-ON to S-OFF (But now I cannot and I have tried for moonshell, rumrunner and firewater)
- all of method above need some ROM right?
If need some ROM can I install ROM in TWRP with "adb sideload" or "adb push" right?
Or I can help my ONE with another method that easily way that I want to do?
Please sugguestion I need all comment and Thank you very much sir.
Click to expand...
Click to collapse
instructions
Unlock the bootloader at HTCDEV
then from fastboot USB
Flash recovery TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then sideload this Rom to your phone
http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_31.6.zip
TWRP / Advanced / ADB Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
http://forum.xda-developers.com/showthread.php?t=2541082
Click to expand...
Click to collapse

clsA said:
instructions
Click to expand...
Click to collapse
Thank you very much I will try and update sir.
My hope come again
[email protected] InsertCoin ADDICT [email protected]~
We can do anything (If we want :3)

I have no luck
Unlock Bootloader ---> OK
Install recovery TWRP 2.6.3.3 ---> OK
adb sideload ---> Failed (I use adb push instead)
Install ROM in TWRP ---> Failed
When install ROM swipe to install after that they show message "Failed to install"
Can I install with RUU.exe?

RobbieKeane said:
I have no luck
Unlock Bootloader ---> OK
Install recovery TWRP 2.6.3.3 ---> OK
adb sideload ---> Failed (I use adb push instead)
Install ROM in TWRP ---> Failed
When install ROM swipe to install after that they show message "Failed to install"
Can I install with RUU.exe?
Click to expand...
Click to collapse
The RUU is very old you need s-off
http://www.htc1guru.com/dld/ruu_m7_...0-13_10-33-1150-01_release_311678_signed-exe/
Try and flash the rom again
this time in TWRP / wipe / advanced wipe / format data
reboot recovery and try and flash the Rom again.
are you sure the rom is complete ? ARHD 31.6 - 1,161,504 KB
MD5: B4EDA0171BF3BFED779C2107EF6C6F76

clsA said:
The RUU is very old you need s-off
http://www.htc1guru.com/dld/ruu_m7_...0-13_10-33-1150-01_release_311678_signed-exe/
Try and flash the rom again
this time in TWRP / wipe / advanced wipe / format data
reboot recovery and try and flash the Rom again.
are you sure the rom is complete ? ARHD 31.6 - 1,161,504 KB
MD5: B4EDA0171BF3BFED779C2107EF6C6F76
Click to expand...
Click to collapse
Thank you for your suggest but now I cannot install any rom or zip file in TWRP it's say "Failed to install".
I don't know how to fixed it and how to diagnose or debug what happen T__T.

Q: find it impossible to find the info I need.

First of all, I've never updated my firmware. I've unlocked my bootloader through the HTC provided steps, I'm on hboot 1.44.
Now for the problems:
I've searched high and low, I cannot find a RUU, ROM or recovery for a Dutch T-Mobile HTC One.
Revone never works, it just gets stuck every single time on (gaining root access).
All I want is to get either S-OFF or simply return to complete stock (not worried about tamperflag).
Anyone who can help out?

seshmaru said:
First of all, I've never updated my firmware. I've unlocked my bootloader through the HTC provided steps, I'm on hboot 1.44.
Now for the problems:
I've searched high and low, I cannot find a RUU, ROM or recovery for a Dutch T-Mobile HTC One.
Revone never works, it just gets stuck every single time on (gaining root access).
All I want is to get either S-OFF or simply return to complete stock (not worried about tamperflag).
Anyone who can help out?
Click to expand...
Click to collapse
I s-off my new phone (hboot 1.44) last night with rumrunner here's the steps I took. Unlocked Bootloader - flash TWRP - Flashed ARHD 31.6 - booted up the phone and went through a quick install with no accounts setup. ran rumrunner and about 10 min later it was all done. Note .. turn off Sleep on the phone or set it to 10 min. don't leave the phone unattended on the second pour superSU ask for permission two times .. choose yes
==================== rumrunner S-OFF 0.5.0 ==============================
rumrunner S-OFF comes with NO WARRANTY (express or implied)
and NO GUARANTEE OF FITNESS for any particular task.
We have made every effort we can to make this a safe process for users
however the authors disclaim any liability for damage to your phone
or other materials or devices used during this process.
The entire risk of running rumrunner S-OFF lies with you, the user.
By using this software you acknowledge and accept that the authors
are not liable for any loss, material or otherwise howsoever caused.
Do you understand the implications of this warning?
(Yes/No)
Yes
Dear User: We will expect that YOU:
(1) Know how to use ADB and FASTBOOT binaries
---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ----
(2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world
(3) Understand that irc support IS NOT A GENERAL HELPDESK
(4) Are able to identify and download the CORRECT package for YOUR device
(5) Know how to enable USB-debugging on YOUR device (Yes, do that now)
(6) Understand that you may NOT repack or redistribute rumrunner S-OFF
Ok?
(Yes/No)
Yes
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (10/120)
Waiting
Test 2: Booting device
Waiting for ADB (29/120)
must ferment longer...
must sanitize, skunky rum is nasty
hold please..............................................
[------------------------------------------------------------]
Rebooting into bootloader (again)
Waiting for fastboot (10/120)
Waiting for ADB (29/120)
must ferment longer...
chilling..................
smells lovely in here....
heh, just a shot glass for this one....
bottles are packed, here we go, shhhhhh....
pouring (1)..................................
pouring (2).................................
pouring (3)...........
Waiting for ADB (32/120)
must ferment longer...
what's that in the bottle still? rum foul, sloppy, real sloppy...
wait for it.........
yep, done. Hope you enjoyed the rum!
Don't forget to send us all your money - [email protected]
Press ENTER to exit
Click to expand...
Click to collapse
C:\fastboot>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
HT34************ device
C:\fastboot>adb shell
[email protected]:/ # echo -ne '\x00' | dd of=/dev/block/mmcb
ock/mmcblk0p7 bs=1 seek=4265988
1+0 records in
1+0 records out
1 bytes transferred in 0.009 secs (111 bytes/sec)
[email protected]:/ # exit
exit
C:\fastboot>adb reboot bootloader
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.15
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT3***********
(bootloader) imei: 354**************
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4203mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.065s
Click to expand...
Click to collapse
here's the files I used
TWRP 2.6.3.3 - http://techerrata.com/browse/twrp2/m7
ARHD - http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_31.6.zip
RumRunner - http://rumrunner.us/

seshmaru said:
First of all, I've never updated my firmware. I've unlocked my bootloader through the HTC provided steps, I'm on hboot 1.44.
Now for the problems:
I've searched high and low, I cannot find a RUU, ROM or recovery for a Dutch T-Mobile HTC One.
Revone never works, it just gets stuck every single time on (gaining root access).
All I want is to get either S-OFF or simply return to complete stock (not worried about tamperflag).
Anyone who can help out?
Click to expand...
Click to collapse
what are you trying to do?
you don't need s-off - if you have unlocked bootloader just flash custom recovery (I recommend TWRP) then flash custom rom.
guide to do those things are found here: http://forum.xda-developers.com/showthread.php?t=2438026

cr1960 said:
what are you trying to do?
you don't need s-off - if you have unlocked bootloader just flash custom recovery (I recommend TWRP) then flash custom rom.
guide to do those things are found here: http://forum.xda-developers.com/showthread.php?t=2438026
Click to expand...
Click to collapse
Pretty sure I need to have S-OFF to update firmwares and switch to GPe no? I do have TWRP flashed.
And thanks clsA I'll try that.

seshmaru said:
Pretty sure I need to have S-OFF to update firmwares and switch to GPe no? I do have TWRP flashed.
And thanks clsA I'll try that.
Click to expand...
Click to collapse
see, you didn't mention anything about GPE in the OP.....

cr1960 said:
see, you didn't mention anything about GPE in the OP.....
Click to expand...
Click to collapse
What my desired outcome is shouldn't be important, I stated that I need S-OFF.
On a side note, is it possible to flash SixthSense 2.1 without S-OFF? The thread itself isn't very clear.
EDIT: Tried it and it does let you.
Anyhow, time to try rumrunner.

need of minor help (s-off but no root)

So back story goes like this.
Broke screen, got replacement from insurance. Want to put phone back to stock.
Device is currently (relocked and s-off) hboot 1.44
Has no root though, as I used RUU to get back to stock 1.27 on T-Mobile.
I have complete functional adb and fastboot and I'm knowledgeable with them.
Just can't figure out how to get SU pushed to the phone so I can revert bootloaders messages showing (relocked & get s-on) to show a fully stock phone. I know it might not matter with insurance and phone being replaced already and that jazz... Just want to do this for peace of mind, as I'm not trying to pay 600$ to them just in case they flag my phone.
Here is my getvar all
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.27.531.11
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT36HW911407
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4268mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.078s

mt3g said:
So back story goes like this.
Broke screen, got replacement from insurance. Want to put phone back to stock.
Device is currently (relocked and s-off) hboot 1.44
Has no root though, as I used RUU to get back to stock 1.27 on T-Mobile.
I have complete functional adb and fastboot and I'm knowledgeable with them.
Just can't figure out how to get SU pushed to the phone so I can revert bootloaders messages showing (relocked & get s-on) to show a fully stock phone. I know it might not matter with insurance and phone being replaced already and that jazz... Just want to do this for peace of mind, as I'm not trying to pay 600$ to them just in case they flag my phone.
Here is my getvar all
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.27.531.11
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT36HW911407
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4268mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.078s
Click to expand...
Click to collapse
http://www.htc1guru.com/guides/guru-bootloader-reset/
flash this in CWM/TWRP.
Choose locked nd remove Tampered flag. Then, u can send it in

raghav kapur said:
http://www.htc1guru.com/guides/guru-bootloader-reset/
flash this in CWM/TWRP.
Choose locked nd remove Tampered flag. Then, u can send it in
Click to expand...
Click to collapse
Problem is I can't get a custom recovery to stick, flashing recovery in fastboot doesn't work.

mt3g said:
Problem is I can't get a custom recovery to stick, flashing recovery in fastboot doesn't work.
Click to expand...
Click to collapse
Thats because ur bootloader is relocked.
Unlock your bootloader via HTC dev
Then flash the custom recovery and then, the zip file i semt you

raghav kapur said:
Thats because ur bootloader is relocked.
Unlock your bootloader via HTC dev
Then flash the custom recovery and then, the zip file i semt you
Click to expand...
Click to collapse
Currently in that process, thanks.

mt3g said:
Currently in that process, thanks.
Click to expand...
Click to collapse
or with S-OFF you can zip a custom recovery.img in a firmware.zip and flash it via RUU mode even with a locked bootloader.

raghav kapur said:
Thats because ur bootloader is relocked.
Unlock your bootloader via HTC dev
Then flash the custom recovery and then, the zip file i semt you
Click to expand...
Click to collapse
alray said:
or with S-OFF you can zip a custom recovery.img in a firmware.zip and flash it via RUU mode even with a locked bootloader.
Click to expand...
Click to collapse
I'm just laughing at myself over here.
So I have root, I have TRWP installed. I have tried the file from HTC1GURU and it will simply not do anything to my bootloader no tampered removal or locking is being done, no errors are showing though...
I tried using revone its a no go as well, all is fine but get the error-1 after entering ./revone -l any ideas guys? I'm so close but things just are not going my way haha. Thanks for the help .

mt3g said:
I'm just laughing at myself over here.
So I have root, I have TRWP installed. I have tried the file from HTC1GURU and it will simply not do anything to my bootloader no tampered removal or locking is being done, no errors are showing though...
I tried using revone its a no go as well, all is fine but get the error-1 after entering ./revone -l any ideas guys? I'm so close but things just are not going my way haha. Thanks for the help .
Click to expand...
Click to collapse
which twrp version are you using? Crushalot specify to use twrp 2.6.3.3 with his tool. NVM he said at least twrp 2.6.3.3 so higher version should be fine.

alray said:
which twrp version are you using? Crushalot specify to use twrp 2.6.3.3 with his tool. NVM he said at least twrp 2.6.3.3 so higher version should be fine.
Click to expand...
Click to collapse
I'm gonna try 2.7
why wouldn't revone work though?

mt3g said:
I'm gonna try 2.7
why wouldn't revone work though?
Click to expand...
Click to collapse
its been a while since I used revone but I think you must have root for it to work correctly.

alray said:
its been a while since I used revone but I think you must have root for it to work correctly.
Click to expand...
Click to collapse
I hate being an idiot, 2.7 worked. I'm locked going to set s-on and run the RUU and put the phone in its box and take a nap or something lol. Thanks again for the help guys.

mt3g said:
I hate being an idiot, 2.7 worked. I'm locked going to set s-on and run the RUU and put the phone in its box and take a nap or something lol. Thanks again for the help guys.
Click to expand...
Click to collapse
don't forget to remove the tampered flag before! (you probably already did just in case)

alray said:
don't forget to remove the tampered flag before! (you probably already did just in case)
Click to expand...
Click to collapse
aaaaaand I Gotta start over lol.

mt3g said:
aaaaaand I Gotta start over lol.
Click to expand...
Click to collapse
really? :laugh:

alray said:
really? :laugh:
Click to expand...
Click to collapse
Ya no joke... I'm so drained lol. The phone is stuck in bootloader can't boot around it recovery or anything. Guess I'll be here helping people out in the future with my knowledge that I've gained.

now I can't even attain s-off lol... got it unlocked with the ugly tampered warning still up there.
Tried rumrunner, firewater all in one tool kit... should i run the ruu again then attempt to proceed?
Why'd I have to skip the stupid tampered part!!!????

mt3g said:
now I can't even attain s-off lol... got it unlocked with the ugly tampered warning still up there.
Tried rumrunner, firewater all in one tool kit... should i run the ruu again then attempt to proceed?
Why'd I have to skip the stupid tampered part!!!????
Click to expand...
Click to collapse
Bumpin for help puhleasee
Sent from my HTC One using XDA Premium 4 mobile app

mt3g said:
now I can't even attain s-off lol... got it unlocked with the ugly tampered warning still up there.
Tried rumrunner, firewater all in one tool kit... should i run the ruu again then attempt to proceed?
Why'd I have to skip the stupid tampered part!!!????
Click to expand...
Click to collapse
well, you need a working OS to use rumrunner or firewater. It cannot be done in fastboot mode. So, ideally, adb sideload ARHD to ur phone. Flash it. Then run the S-OFF tool of ur choice

raghav kapur said:
well, you need a working OS to use rumrunner or firewater. It cannot be done in fastboot mode. So, ideally, adb sideload ARHD to ur phone. Flash it. Then run the S-OFF tool of ur choice
Click to expand...
Click to collapse
Already have a booted OS with root.
Sent from my HTC One using XDA Premium 4 mobile app

mt3g said:
Already have a booted OS with root.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
use Revone if u have HBOOT 1.44

[Solved] - Returning to Stock with hboot 1.57.0000?

Hi,
I'm trying to return my HTC One m7 to stock.
I followed this guide: http://htc-one.wonderhowto.com/how-...actory-settings-for-warranty-repairs-0149204/
and didn't realise this wouldn't work for HBOOT 1.57.
Subsequently my bootloader status currently shows as
*** Tampered ***
**** Unlocked ***
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
Radio-4T.28.3218.04
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048mb
Click to expand...
Click to collapse
How can I remove the tampered state and return this to locked? All the guides I've been able to find only show how to do it for HBOOT 1.44 up to 1.55.
Edit: Solved this by following alray's advice to use nkk71's superguide: http://forum.xda-developers.com/showthread.php?t=2541082

WastedJoker said:
Hi,
I'm trying to return my HTC One m7 to stock.
I followed this guide: http://htc-one.wonderhowto.com/how-...actory-settings-for-warranty-repairs-0149204/
and didn't realise this wouldn't work for HBOOT 1.57.
Subsequently my bootloader status currently shows as
How can I remove the tampered state and return this to locked? All the guides I've been able to find only show how to do it for HBOOT 1.44 up to 1.55.
Click to expand...
Click to collapse
you first need to achieve s-off and then follow nkk71's guide to return stock (link in my signature)

I'm almost there but because I'm on hboot 1.44 and using Win 8.1, I can't move to s-on.
I'll try the final step (fastboot oem writesecureflag 3) from my work pc tomorrow which is on win 7.

WastedJoker said:
I'm almost there but because I'm on hboot 1.44 and using Win 8.1, I can't move to s-on.
I'll try the final step (fastboot oem writesecureflag 3) from my work pc tomorrow which is on win 7.
Click to expand...
Click to collapse
you can use a linux live usb (instructions are in the FAQ section of my guide)
how were you able to do all the other steps with Win8.1??; if you were following my guide the hboot downgrade would only be one of the first steps.

I used your guide to get back to 1.44 then revone to remove tampered and unlocked states. I also used firewater to get s-off for part of the steps.
I didn't realise i could downgrade the hboot so that's basically where i was going wrong.

WastedJoker said:
I used your guide to get back to 1.44 then revone to remove tampered and unlocked states. I also used firewater to get s-off for part of the steps.
I didn't realise i could downgrade the hboot so that's basically where i was going wrong.
Click to expand...
Click to collapse
depending on which method you are using, once hboot is downgraded to 1.44, that would only be the first "fastboot flash zip ruu.zip", the second one also needs to be completed
I'm not sure at what stage and method you are at, but going s-on sounds like a very bad idea at the moment

Currenttly I have ARHD 53 installed.
Bootloader is *** LOCKED *** with hboot 1.44.
My CID is 1111111 and I'll be using an o2 UK RUU.
The linux live cd method is handy but I'll just wait til I get to work tonight to work in bootloader from my win7 machine there.
According to this guide: http://htc-one.wonderhowto.com/how-...actory-settings-for-warranty-repairs-0149204/ I only need to get back to s-on then flash the RUU.
but according to your guide I have to flash RUU first then s-on is optional?

WastedJoker said:
Currenttly I have ARHD 53 installed.
Bootloader is *** LOCKED *** with hboot 1.44.
My CID is 1111111 and I'll be using an o2 UK RUU.
The linux live cd method is handy but I'll just wait til I get to work tonight to work in bootloader from my win7 machine there.
According to this guide: http://htc-one.wonderhowto.com/how-...actory-settings-for-warranty-repairs-0149204/ I only need to get back to s-on then flash the RUU.
but according to your guide I have to flash RUU first then s-on is optional?
Click to expand...
Click to collapse
my guide uses decrypted ruu.zip(s), which can only be flashed with S-OFF. and I leave going from S-OFF to S-ON as the last step, just in case something didn't work correctly.
if you are going to use the 4.20.206.16 RUU.EXE then you can/should go S-ON first, and hope it works (the 4.xx RUUs have been known to sometimes give trouble depending on the PC configuration)

nkk71 said:
my guide uses decrypted ruu.zip(s), which can only be flashed with S-OFF. and I leave going from S-OFF to S-ON as the last step, just in case something didn't work correctly.
if you are going to use the 4.20.206.16 RUU.EXE then you can/should go S-ON first, and hope it works (the 4.xx RUUs have been known to sometimes give trouble depending on the PC configuration)
Click to expand...
Click to collapse
Your way makes a lot of sense! I'll get the RUU from your guide links

WastedJoker said:
Your way makes a lot of sense! I'll get the RUU from your guide links
Click to expand...
Click to collapse
for O2, you'd need to use the CWM restore method, which is a bit longer.
But here's a thought, why not stay S-OFF, try the 4.20 RUU.EXE on the Win7 PC you have, if it works then you can downgrade hboot again, go S-ON and run it again.
(because I don't recommend you go from S-Off to S-On on hboot above 1.54, as i mentioned in my guide)
if you do want to use the CWM method of my guide, let me know, and I'll link the files you'll need
EDIT: remember to change your cid back to the original, before any of this

nkk71 said:
for O2, you'd need to use the CWM restore method, which is a bit longer.
But here's a thought, why not stay S-OFF, try the 4.20 RUU.EXE on the Win7 PC you have, if it works then you can downgrade hboot again, go S-ON and run it again.
(because I don't recommend you go from S-Off to S-On on hboot above 1.54, as i mentioned in my guide)
if you do want to use the CWM method of my guide, let me know, and I'll link the files you'll need
EDIT: remember to change your cid back to the original, before any of this
Click to expand...
Click to collapse
I'll use the CWM restore method then (http://forum.xda-developers.com/showpost.php?p=47794219&postcount=5 - posting this link for my own reference)

WastedJoker said:
I'll use the CWM restore method then (http://forum.xda-developers.com/showpost.php?p=47794219&postcount=5 - posting this link for my own reference)
Click to expand...
Click to collapse
I've posted the files you'll need directly in my thread:
http://forum.xda-developers.com/showthread.php?p=54857652&postcount=1068

nkk71 said:
I've posted the files you'll need directly in my thread:
http://forum.xda-developers.com/showthread.php?p=54857652&postcount=1068
Click to expand...
Click to collapse
I'm stuck at this step:
Step 3: restore nandroid
fastboot boot CWM.img
Error in cmd:
fastboot boot cwm.img
downloading 'boot.img'...
OKAY [ 1.120s]
booting...
FAILED (remote: not allowed)
finished. total time: 1.120s
What's going on here?

WastedJoker said:
I'm stuck at this step:
Step 3: restore nandroid
fastboot boot CWM.img
Error in cmd:
fastboot boot cwm.img
downloading 'boot.img'...
OKAY [ 1.120s]
booting...
FAILED (remote: not allowed)
finished. total time: 1.120s
What's going on here?
Click to expand...
Click to collapse
You are locked / relocked, that comes later in CWM restore method.
If you don't wanna use unlock token, check the last few pages in my thread about masked firmware and adb commands to unlock

nkk71 said:
You are locked / relocked, that comes later in CWM restore method.
If you don't wanna use unlock token, check the last few pages in my thread about masked firmware and adb commands to unlock
Click to expand...
Click to collapse
I had the bin file handy and just tried the unlock:
fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
FAILED (command write failed (Invalid argument))
finished. total time: 0.001s
Gonna look in your thread for those other methods
here's my getvar:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.13.3231.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.401.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4263mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.076s
I retried the unlocking and it worked this time.
Weird.

WastedJoker said:
I had the bin file handy and just tried the unlock:
fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)...
FAILED (command write failed (Invalid argument))
finished. total time: 0.001s
Gonna look in your thread for those other methods
here's my getvar:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.13.3231.27
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.28.401.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4263mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.076s
Click to expand...
Click to collapse
I'm on my mobile, so can't help you right now, but it should be on one of the last pages.
Also after a getvar all on hboot 1.44 bootloader will freeze, so you need to unplug and replug the USB cable

nkk71 said:
I'm on my mobile, so can't help you right now, but it should be on one of the last pages.
Also after a getvar all on hboot 1.44 bootloader will freeze, so you need to unplug and replug the USB cable
Click to expand...
Click to collapse
Yeah, I saw that on your thread.
I'm back on track now - just pushing the nandroid. Thank you so much for your help, you've been amazing!

WastedJoker said:
Yeah, I saw that on your thread.
I'm back on track now - just pushing the nandroid. Thank you so much for your help, you've been amazing!
Click to expand...
Click to collapse
Ah good luck then, cause I'm getting some bad looks here, texting right now

nkk71 said:
Ah good luck then, cause I'm getting some bad looks here, texting right now
Click to expand...
Click to collapse
All done, thanks again

WastedJoker said:
All done, thanks again
Click to expand...
Click to collapse
Nice :laugh:
could you also edit main thread title to include [SOLVED], thanks
edit the first post -> at the bottom of the edit window, click Go Advanced, and then you can edit main title